AlarmNotificationType INTEGERcommunicationsAlarm(2) environmental(6) equipmentAlarm(5) integrityViolation(7) operationalViolation(8) other(1) physicalViolation(9) processingErrorAlarm(4) qualityOfServiceAlarm(3) securityServiceOrMechanismViloation(10) timeDomainViolation(11) undefined(0)
Type of alarm as defined in ITU-T X.733.
AlarmPerceivedSeverity INTEGERcleared(1) critical(3) indeterminate(2) major(4) minor(5) warning(6)
Alarm severity as defined in ITU-T X.733.
AlarmProbableCause INTEGERadapterError(1) applicationSubsystemFailure(2) bandwidthReduced(3) callEstablishmentError(4) communicationsProtocolError(5) communicationsSubsystemFailure(6) configurationOrCustomizationError(7) congestion(8) corruptData(9) cpuCyclesLimitExceeded(10) dTEdCEInterfaceError(11) datasetOrModemError(12) degradedSignal(13) enclosureDoorOpen(14) equipmentMalfunction(15) excessiveVibration(16) fileError(17) fireDetected(18) floodDetected(19) framingError(20) heatingOrVentilationOrCoolingSystemProblem(21) humidityUnacceptable(22) inputDeviceError(23) inputOutputDeviceError(24) lANError(25) leakDetected(26) localNodeTransmissionError(27) lossOfFrame(28) lossOfSignal(29) materialSupplyExhausted(30) multiplexerProblem(31) outOfMemory(32) outputDeviceError(33) performanceDegraded(34) powerProblem(35) pressureUnacceptable(36) processorProblem(37) pumpFailure(38) queueSizeExceeded(39) receiveFailure(40) receiverFailure(41) remoteNodeTransmissionError(42) resourceAtOrNearingCapacity(43) responseTimeExcessive(44) retransmissionRateExcessive(45) softwareError(47) softwareProgramAbnormallyTerminated(48) softwareProgramError(46) storageCapacityProblem(49) temperatureUnacceptable(50) thresholdCrossed(51) timingProblem(52) toxicLeakDetected(53) transmitFailure(54) transmitterFailure(55) undefined(0) underlyingResourceUnavailable(56) versionMismatch(57)
Alarm probable cause as defined in ITU-T X.733.
PortMode INTEGERnormal(1) service(2)
Port Mode.
normal - The port is active. Alarms are not suppressed.
service - the port is in Service Mode. Alarms are
beeing suppressed. When service is ready the
Port Mode should be set back to normal.
PortStatus INTEGERcd(7) down(2) eyeSafety(6) high(4) idle(1) low(5) ncd(8) up(3)
The operational state for a port.
idle - The port is not activated
down - The port traffic is lost.
up - There is traffic on the port.
high - The port got to high power.
low - The port got to low power.
eyeSafety - The Line Tx port is in Eye Safety Mode.
This means that either the connector on the
Line Tx port is not inserted or that you have
too strong reflection from the line fiber.
cd - Channel detected.
ncd - No channel detected.
PortType INTEGERbiDi(3) rx(1) tx(2)
Port direction.
rx - The port direction is receiving(Rx).
tx - The port direction is transmitting(Tx).
biDi - The port direction is both transmitting and receiving.
UnitType INTEGERfan(4) nmb(1) psu1(2) psu2(3) slaveFan(9) slaveNmb(6) slavePsu1(7) slavePsu2(8) system(5)
The unit type in the M-Series.
nmb - Network Management Board. The controlling
board of the M-Series.
psu1 - The Power Supply in slot 1 of the M-Series.
psu2 - The Power Supply in slot 2 of the M-Series.
fan - The Fan of the M-Series.
system - The chassis.
slaveNmb - Network Management Board of the Cascading system.
slavePsu1 - The Power Supply in slot 1 of the Cascading M-Series.
slavePsu2 - The Power Supply in slot 2 of the Cascading M-Series.
slaveFan - The Fan of the Cascading M-Series.