DCP-OCH-MIB
SmartOptics ASThis is the enterprise specific DCP OCH MIB for Smartoptics
snmptranslate -m DCP-OCH-MIB -Tpsnmpwalk -v2c -c <community> -m DCP-OCH-MIB <host> 1.3.6.1.4.1.30826.2.2.4Imports
| DCP-MIB | dcpGeneric |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| SO-TC-MIB | DcpHundreds, DcpTenths, InterfaceStatus, ItuPerceivedSeverity, OchPortMode, OpticalPower1Decimal |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdcpOch | 1.3.6.1.4.1.30826.2.2.4 | |||
identity This is the enterprise specific DCP OCH MIB for Smartoptics | ||||
| NdcpOchGeneral | 1.3.6.1.4.1.30826.2.2.4.1 | |||
| TdcpOchGeneralTable | 1.3.6.1.4.1.30826.2.2.4.1.1 | NA | ||
table · not-accessible · current A table with general information about the och port. | ||||
| RdcpOchGeneralEntry | 1.3.6.1.4.1.30826.2.2.4.1.1.1 | NA | ||
| CdcpOchGeneralIndex | 1.3.6.1.4.1.30826.2.2.4.1.1.1.1 | Unsigned32 (1..1000000) | NA | |
column · Unsigned32 (1..1000000) · not-accessible · current Port Index in the following format: ccspp where cc: chassis. s: slot number. pp: port number. | ||||
| CdcpOchGeneralPortName | 1.3.6.1.4.1.30826.2.2.4.1.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The port name in the following format: och-c/s/port where c = chassis, s = slot, port = port name or ocm-c/s where c = chassis, s = slot | ||||
| CdcpOchGeneralSpacing | 1.3.6.1.4.1.30826.2.2.4.1.1.1.3 | DcpHundreds | RO | |
column · DcpHundreds · read-only · current The channel spacing used in units of 0.01 GHz. | ||||
| CdcpOchGeneralMaxChannels | 1.3.6.1.4.1.30826.2.2.4.1.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of channels that is used for the optical power channel plan for the EDFA. | ||||
| CdcpOchGeneralActiveChannels | 1.3.6.1.4.1.30826.2.2.4.1.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of active channels currently in regulation. | ||||
| CdcpOchGeneralUtilization | 1.3.6.1.4.1.30826.2.2.4.1.1.1.6 | Gauge32 (0..100) | RO | |
column · Gauge32 (0..100) · read-only · current The number of channels used in the system in units of %. | ||||
| CdcpOchGeneralConfiguredChannels | 1.3.6.1.4.1.30826.2.2.4.1.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of channels that are enabled. | ||||
| NdcpOchObjects | 1.3.6.1.4.1.30826.2.2.4.2 | |||
| TdcpOchTable | 1.3.6.1.4.1.30826.2.2.4.2.1 | NA | ||
table · not-accessible · current A table with all optical channels of the system. | ||||
| RdcpOchEntry | 1.3.6.1.4.1.30826.2.2.4.2.1.1 | NA | ||
| CdcpOchIndex | 1.3.6.1.4.1.30826.2.2.4.2.1.1.1 | Unsigned32 (1..1000000) | NA | |
column · Unsigned32 (1..1000000) · not-accessible · current Och Index in the following format: cspoooy where c: chassis. s: slot number. p: port number. ooo: Och number. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. Same Index is used in the IF-MIB. | ||||
| CdcpOchChannelId | 1.3.6.1.4.1.30826.2.2.4.2.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The optical channel id name in the following format: och-c/s/p/och where c = chassis. s = slot number. port = edfa or eq. och = optical channel. | ||||
| CdcpOchRxPower | 1.3.6.1.4.1.30826.2.2.4.2.1.1.3 | DcpTenths | RO | |
column · DcpTenths · read-only · current The optical input power for the optical channel in units of 0.1 dBm. | ||||
| CdcpOchTxPower | 1.3.6.1.4.1.30826.2.2.4.2.1.1.4 | DcpTenths | RO | |
column · DcpTenths · read-only · current The optical output power for the optical channel in units of 0.1 dBm. | ||||
| CdcpOchWssAttenuation | 1.3.6.1.4.1.30826.2.2.4.2.1.1.5 | DcpTenths | RO | |
column · DcpTenths · read-only · current The WSS attenuation for the optical channel in units of 0.1 dB. | ||||
| CdcpOchWssInsertionLoss | 1.3.6.1.4.1.30826.2.2.4.2.1.1.6 | DcpTenths | RO | |
column · DcpTenths · read-only · current The calibration value of WSS insertion loss in units of 0.1 dBm. | ||||
| CdcpOchWantedOutputPower | 1.3.6.1.4.1.30826.2.2.4.2.1.1.7 | DcpTenths | RO | |
column · DcpTenths · read-only · current The wanted optical output power for the optical channel in units of 0.1 dBm. | ||||
| CdcpOchPortMode | 1.3.6.1.4.1.30826.2.2.4.2.1.1.8 | OchPortMode | RO | |
column · OchPortMode · read-only · current The port mode for the channel. Port mode can be on or off. off - The channel is disabled. on - The channel is enabled. edfa - The channel is enabled and connected to the edfa port. express - The channel is enabled and connected to the express port. | ||||
| CdcpOchStatus | 1.3.6.1.4.1.30826.2.2.4.2.1.1.9 | InterfaceStatus | RO | |
column · InterfaceStatus · read-only · current The operational state for a channel. idle - The optical channel is not activated. down - The optical channel traffic is lost. up - There is traffic on the optical channel. | ||||
| CdcpOchDescription | 1.3.6.1.4.1.30826.2.2.4.2.1.1.10 | DisplayString (SIZE (0..128)) | RO | |
column · DisplayString (SIZE (0..128)) · read-only · current User configurable description string for the optical channel. | ||||
| CdcpOchAlarm | 1.3.6.1.4.1.30826.2.2.4.2.1.1.11 | ItuPerceivedSeverity | RO | |
column · ItuPerceivedSeverity · read-only · current The highest alarm severity of the optical channel. | ||||
| NdcpOchMIBCompliance | 1.3.6.1.4.1.30826.2.2.4.3 | |||
| NdcpOchMIBGroups | 1.3.6.1.4.1.30826.2.2.4.3.1 | |||
| GdcpOchGeneralTableGroupV1 | 1.3.6.1.4.1.30826.2.2.4.3.1.1 | |||
group · current The och general table objects V1. | ||||
| GdcpOchTableGroupV1 | 1.3.6.1.4.1.30826.2.2.4.3.1.2 | |||
group · current The och table objects V1. | ||||
| NdcpOchMIBCompliances | 1.3.6.1.4.1.30826.2.2.4.3.2 | |||
| MdcpOchBasicComplV1 | 1.3.6.1.4.1.30826.2.2.4.3.2.1 | |||
compliance · current Basic implementation requirements for the DCP-OCH-MIB V1. | ||||