HAWK-I2-MIB
SINETICASmartZone Gateway MIB for the following products:- - SmartZone Gateway EP022 (PowerHawk 2) - SmartZone Gateway EP042 (RacKMS) - SmartZone Gateway EPA064 (Hawk-i 3) - SmartZone Gateway EPA126 (Eagle-i) - SmartZone Gateway E24 (Envirohawk 2) - RMS Compact 2 - SmartZone Network-Enabled Rack PDU
snmptranslate -m HAWK-I2-MIB -Tpsnmpwalk -v2c -c <community> -m HAWK-I2-MIB <host> 1.3.6.1.4.1.3711.24Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nsinetica | 1.3.6.1.4.1.3711 | ||||||||||||||||
| Ihawki2MIB | 1.3.6.1.4.1.3711.24 | ||||||||||||||||
identity SmartZone Gateway MIB for the following products:- - SmartZone Gateway EP022 (PowerHawk 2) - SmartZone Gateway EP042 (RacKMS) - SmartZone Gateway EPA064 (Hawk-i 3) - SmartZone Gateway EPA126 (Eagle-i) - SmartZone Gateway E24 (Envirohawk 2) - RMS Compact 2 - SmartZone Network-Enabled Rack PDU | |||||||||||||||||
| Nv1 | 1.3.6.1.4.1.3711.24.1 | ||||||||||||||||
| Nobjects | 1.3.6.1.4.1.3711.24.1.1 | ||||||||||||||||
| Ninputs | 1.3.6.1.4.1.3711.24.1.1.1 | ||||||||||||||||
| NipCommon | 1.3.6.1.4.1.3711.24.1.1.1.1 | ||||||||||||||||
| NipEnable | 1.3.6.1.4.1.3711.24.1.1.1.1.1 | ||||||||||||||||
| SipSelect | 1.3.6.1.4.1.3711.24.1.1.1.1.1.1 | INTEGER (0..48) | RW | 0 | |||||||||||||
scalar · INTEGER (0..48) · read-write · current Selects the channel to be enabled or disabled by ipInsert. A value of 0 selects no channel. Example values from LibreNMS test devices
| |||||||||||||||||
| SipInsert | 1.3.6.1.4.1.3711.24.1.1.1.1.1.2 | InputDataType | RW | ||||||||||||||
scalar · InputDataType · read-write · current Inserts or removes the channel selected by ipSelect - causes an entry for that channel to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| NipTHA | 1.3.6.1.4.1.3711.24.1.1.1.2 | ||||||||||||||||
| SipTempScaleFlag | 1.3.6.1.4.1.3711.24.1.1.1.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Temperature scale (Celsius/Fahrenheit) for temperature monitoring.
| |||||||||||||||||
| TipTHATable | 1.3.6.1.4.1.3711.24.1.1.1.2.2 | NA | |||||||||||||||
table · not-accessible · current A table giving data for all enabled inputs with analogue-type monitoring. | |||||||||||||||||
| RipTHAEntry | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one analogue-type input.
| |||||||||||||||||
| CipTHAChan | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.1 | INTEGER (0..48) | RO | 1 | |||||||||||||
column · INTEGER (0..48) · read-only · current The input number. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHARS | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.2 | RowStatus | RO | 1 | |||||||||||||
column · RowStatus · read-only · current The analogue-type input table row status. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAName | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.3 | DisplayString | RW | Input 01 | |||||||||||||
column · DisplayString · read-write · current The name of this input Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHALocn | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.4 | DisplayString | RO | MCU | |||||||||||||
column · DisplayString · read-only · current A system-defined name for the physical location of this input, e.g. MCU. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAAutoDetect | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.5 | TruthValue | RO | 1 | |||||||||||||
column · TruthValue · read-only · current Indicates that the type of data this input is monitoring is selected automatically. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAType | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.6 | InputDataType | RO | 2 | |||||||||||||
column · InputDataType · read-only · current Indicates the type of data this input is monitoring. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAValue | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.7 | INTEGER (-999999999 | -99999999 | -17999680 | -10000000 | -9997268 | -580..120000 | 10000000 | 10002732 | 18000320 | 99999999) | RO | 274 | |||||||||||||
column · INTEGER (-999999999 | -99999999 | -17999680 | -10000000 | -9997268 | -580..120000 | 10000000 | 10002732 | 18000320 | 99999999) · read-only · current The current reading in the relevant measurement units. -999999999 - Input Data Uninitialised -99999999 - Input Data Under Range -17999680 - Temperature Data Under Range in F -10000000 - Temperature Data Under Range in C -9997268 - Temperature Data Under Range in K -580..3740 - Valid Range for all input types. Subranges described below: 580..3740 supports Temperature sensors in C, F or K (see ipTempScaleFlag) to a tenth of a degree (-58.0F to 374.0 K) 0..1000 supports Humidity sensors in tenths of a percentage Relative Humidity. (0.0% to 100.0%) 0..120000 supports Analog sensors to tenths of a Volt. (0.0 to 12000.0V) 10000000 - Temperature Data Over Range in C 10002732 - Temperature Data Over Range in K 18000320 - Temperature Data Over Range in F 99999999 - Input Data Over Range Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAScaling | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.8 | INTEGER (0 | 1 | 10 | 100 | 1000 | 10000) | RW | 0 | |||||||||||||
column · INTEGER (0 | 1 | 10 | 100 | 1000 | 10000) · read-write · current Scaling factor for ipTHAValue in units of 0.1 when ipTHAType=analogue. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAOffset | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.9 | INTEGER (-1479..2119) | RW | 0 | |||||||||||||
column · INTEGER (-1479..2119) · read-write · current Calibration offset in the same units as for ipTHAValue. Example values from LibreNMS test devices
| |||||||||||||||||
| CipTHAHysteresis | 1.3.6.1.4.1.3711.24.1.1.1.2.2.1.10 | INTEGER (-1479..2119) | RW | 50 | |||||||||||||
column · INTEGER (-1479..2119) · read-write · current Hysteresis on threshold levels in the same units as for ipTHAValue. Example values from LibreNMS test devices
| |||||||||||||||||
| NipTHATrapsCfg | 1.3.6.1.4.1.3711.24.1.1.1.2.3 | ||||||||||||||||
| TipTHAThreshTable | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1 | NA | |||||||||||||||
table · not-accessible · current A table listing the trap threshold levels for all enabled inputs with analogue-type monitoring. | |||||||||||||||||
| RipTHAThreshEntry | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing threshold information for one analogue-type input.
| |||||||||||||||||
| CipTHAThreshChan | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.1 | INTEGER (0..48) | RO | ||||||||||||||
column · INTEGER (0..48) · read-only · current The input number. | |||||||||||||||||
| CipTHAThreshRS | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The analogue-type input table row status. | |||||||||||||||||
| CipTHAUCL | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.3 | INTEGER (-300..100000) | RW | ||||||||||||||
column · INTEGER (-300..100000) · read-write · current The Upper Critical Limit for this input in the same units as for ipTHAValue. | |||||||||||||||||
| CipTHAUWL | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.4 | INTEGER (-300..100000) | RW | ||||||||||||||
column · INTEGER (-300..100000) · read-write · current The Upper Warning Limit for this input in the same units as for ipTHAValue. | |||||||||||||||||
| CipTHALWL | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.5 | INTEGER (-300..100000) | RW | ||||||||||||||
column · INTEGER (-300..100000) · read-write · current The Lower Warning Limit for this input in the same units as for ipTHAValue. | |||||||||||||||||
| CipTHALCL | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.6 | INTEGER (-300..100000) | RW | ||||||||||||||
column · INTEGER (-300..100000) · read-write · current The Lower Critical Limit for this input in the same units as for ipTHAValue. | |||||||||||||||||
| CipTHADeltaPos | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.7 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Rising rate of change threshold for ipTHAValue in 0.1 units per minute. | |||||||||||||||||
| CipTHADeltaNeg | 1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.8 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Falling rate of change threshold for ipTHAValue in 0.1 units per minute. | |||||||||||||||||
| TipTHATrapEnTable | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2 | NA | |||||||||||||||
table · not-accessible · current The table that controls trap enabling for all enabled inputs with analogue-type monitoring. | |||||||||||||||||
| RipTHATrapEnEntry | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing trap enabling information for one analogue-type input.
| |||||||||||||||||
| CipTHATrapEnChan | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.1 | INTEGER (0..48) | RO | ||||||||||||||
column · INTEGER (0..48) · read-only · current The input number. | |||||||||||||||||
| CipTHATrapEnRS | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The analogue-type input table row status. | |||||||||||||||||
| CipTHAUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.3 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables and disables input UCL alarm traps. | |||||||||||||||||
| CipTHAUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.4 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables and disables input UWL alarm traps. | |||||||||||||||||
| CipTHALWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.5 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables and disables input LWL alarm traps. | |||||||||||||||||
| CipTHALCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.6 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables and disables input LCL alarm traps. | |||||||||||||||||
| CipTHADeltaPosTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.7 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for ipTHADeltaPos. | |||||||||||||||||
| CipTHADeltaNegTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.8 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for ipTHADeltaNeg. | |||||||||||||||||
| TipTHATrapPerTable | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3 | NA | |||||||||||||||
table · not-accessible · current The table that controls trap repetition for all enabled inputs with analogue-type monitoring. | |||||||||||||||||
| RipTHATrapPerEntry | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing trap repetition information for one analogue-type input.
| |||||||||||||||||
| CipTHATrapPerChan | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.1 | INTEGER (0..48) | RO | ||||||||||||||
column · INTEGER (0..48) · read-only · current The input number. | |||||||||||||||||
| CipTHATrapPerRS | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The table row status. | |||||||||||||||||
| CipTHATrapUCLPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.3 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHATrapUCL in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| CipTHATrapUWLPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.4 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHATrapUWL in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| CipTHATrapLWLPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.5 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHATrapLWL in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| CipTHATrapLCLPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.6 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHATrapLCL in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| CipTHATrapDeltaPosPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.7 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHADeltaPos in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| CipTHATrapDeltaNegPer | 1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.8 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for ipTHADeltaNeg in seconds. A value of 0 disables trap repetition. | |||||||||||||||||
| NipContact | 1.3.6.1.4.1.3711.24.1.1.1.3 | ||||||||||||||||
| TipContTable | 1.3.6.1.4.1.3711.24.1.1.1.3.1 | NA | |||||||||||||||
table · not-accessible · current A table listing the parameters and data for all enabled inputs with contact-type monitoring. | |||||||||||||||||
| RipContEntry | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one contact input.
| |||||||||||||||||
| CipContChan | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.1 | INTEGER (0..48) | RO | ||||||||||||||
column · INTEGER (0..48) · read-only · current The input number. | |||||||||||||||||
| CipContRS | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The contact input table row status. | |||||||||||||||||
| CipContName | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The name of this input | |||||||||||||||||
| CipContLocn | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current A system-defined name for the physical location of this input, e.g. MCU. | |||||||||||||||||
| CipContAutoDetect | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.5 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Indicates that the type of data this input is monitoring is selected automatically. | |||||||||||||||||
| CipContNormState | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.6 | ContactState | RW | ||||||||||||||
column · ContactState · read-write · current The normal state for this contact. | |||||||||||||||||
| CipContCurrState | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.7 | InputContactState | RO | ||||||||||||||
column · InputContactState · read-only · current The current state of this contact. | |||||||||||||||||
| CipContTrigMode | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.8 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The contact trigger mode, level, +ve edge, -ve edge.
| |||||||||||||||||
| CipContReset | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.9 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Resets the contact after triggering in edge mode. | |||||||||||||||||
| CipContTrapEn | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Configure contact input traps.
| |||||||||||||||||
| CipContTrapPeriod | 1.3.6.1.4.1.3711.24.1.1.1.3.1.1.11 | INTEGER (0..65535) | RW | ||||||||||||||
column · INTEGER (0..65535) · read-write · current Set to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in seconds | |||||||||||||||||
| Noutputs | 1.3.6.1.4.1.3711.24.1.1.2 | ||||||||||||||||
| NopEnable | 1.3.6.1.4.1.3711.24.1.1.2.1 | ||||||||||||||||
| SopSelect | 1.3.6.1.4.1.3711.24.1.1.2.1.1 | INTEGER (0..19) | RW | ||||||||||||||
scalar · INTEGER (0..19) · read-write · current Selects the channel to be enabled or disabled by opEnable. A value of 0 selects no channel. | |||||||||||||||||
| SopInsert | 1.3.6.1.4.1.3711.24.1.1.2.1.2 | EnableState | RW | ||||||||||||||
scalar · EnableState · read-write · current Enables or disables the channel selected by opSelect - causes an entry for that channel to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TopTable | 1.3.6.1.4.1.3711.24.1.1.2.2 | NA | |||||||||||||||
table · not-accessible · current A table listing the parameters and data for all outputs. | |||||||||||||||||
| RopEntry | 1.3.6.1.4.1.3711.24.1.1.2.2.1 | NA | |||||||||||||||
| CopChan | 1.3.6.1.4.1.3711.24.1.1.2.2.1.1 | INTEGER (0..19) | RO | ||||||||||||||
column · INTEGER (0..19) · read-only · current The output number. | |||||||||||||||||
| CopRS | 1.3.6.1.4.1.3711.24.1.1.2.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The contact input table row status. | |||||||||||||||||
| CopName | 1.3.6.1.4.1.3711.24.1.1.2.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A user-defined name for this output. | |||||||||||||||||
| CopLocn | 1.3.6.1.4.1.3711.24.1.1.2.2.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A system-defined name for the physical location of this output, e.g. MCU. | |||||||||||||||||
| CopNormState | 1.3.6.1.4.1.3711.24.1.1.2.2.1.5 | RelayState | RW | ||||||||||||||
column · RelayState · read-write · current Sets or reads the required normal state of this output. | |||||||||||||||||
| CopCurrState | 1.3.6.1.4.1.3711.24.1.1.2.2.1.6 | RelayState | RO | ||||||||||||||
column · RelayState · read-only · current Reads the current state of this output. | |||||||||||||||||
| CopOnDelTime | 1.3.6.1.4.1.3711.24.1.1.2.2.1.7 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Sets the 'on' delay time for this output. | |||||||||||||||||
| CopOffDelTime | 1.3.6.1.4.1.3711.24.1.1.2.2.1.8 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Sets the 'off' delay time for this output. | |||||||||||||||||
| CopBooleanEqn | 1.3.6.1.4.1.3711.24.1.1.2.2.1.9 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current Boolean equation string | |||||||||||||||||
| CopTrapEn | 1.3.6.1.4.1.3711.24.1.1.2.2.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Configure output traps.
| |||||||||||||||||
| CopTrapPeriod | 1.3.6.1.4.1.3711.24.1.1.2.2.1.11 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Set to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in seconds | |||||||||||||||||
| CopControlState | 1.3.6.1.4.1.3711.24.1.1.2.2.1.12 | OutputControlState | RW | ||||||||||||||
column · OutputControlState · read-write · current Reads the current control state of an output. | |||||||||||||||||
| Nkeypads | 1.3.6.1.4.1.3711.24.1.1.4 | ||||||||||||||||
| NkpEnable | 1.3.6.1.4.1.3711.24.1.1.4.1 | ||||||||||||||||
| SkpSelect | 1.3.6.1.4.1.3711.24.1.1.4.1.1 | INTEGER (0..24) | RW | ||||||||||||||
scalar · INTEGER (0..24) · read-write · current Selects the keypad to be enabled or disabled by kpEnable. A value of 0 selects no keypad. | |||||||||||||||||
| SkpInsert | 1.3.6.1.4.1.3711.24.1.1.4.1.2 | KeypadEnableState | RW | ||||||||||||||
scalar · KeypadEnableState · read-write · current Enables or disables the keypad selected by kpSelect - causes an entry for that keypad to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TkpCtlTable | 1.3.6.1.4.1.3711.24.1.1.4.2 | NA | |||||||||||||||
table · not-accessible · current A table listing the parameters and data for the keypads. | |||||||||||||||||
| RkpCtlEntry | 1.3.6.1.4.1.3711.24.1.1.4.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one keypad.
| |||||||||||||||||
| CkpNumber | 1.3.6.1.4.1.3711.24.1.1.4.2.1.1 | INTEGER (1..2) | RO | ||||||||||||||
column · INTEGER (1..2) · read-only · current The keypad number. | |||||||||||||||||
| CkpRS | 1.3.6.1.4.1.3711.24.1.1.4.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The keypad table row status. | |||||||||||||||||
| CkpManufacturer | 1.3.6.1.4.1.3711.24.1.1.4.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The name of the manufacturer of the keypad. | |||||||||||||||||
| CkpName | 1.3.6.1.4.1.3711.24.1.1.4.2.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A name identifying the keypad. | |||||||||||||||||
| CkpDoorLatchTimeOut | 1.3.6.1.4.1.3711.24.1.1.4.2.1.5 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Time-out value in seconds for which the door latch is held open. | |||||||||||||||||
| CkpRtnToStndbyTimeOut | 1.3.6.1.4.1.3711.24.1.1.4.2.1.6 | INTEGER (0..99) | RW | ||||||||||||||
column · INTEGER (0..99) · read-write · current Time-out value in seconds for Return to Standby Mode | |||||||||||||||||
| CkpEntryCodeValid | 1.3.6.1.4.1.3711.24.1.1.4.2.1.7 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Set if previous keypad entry was valid. | |||||||||||||||||
| CkpDoorOpenTimeOut | 1.3.6.1.4.1.3711.24.1.1.4.2.1.8 | INTEGER (0..99) | RW | ||||||||||||||
column · INTEGER (0..99) · read-write · current Time-out value in seconds for Door Open. | |||||||||||||||||
| CkpRemoteDoorOpen | 1.3.6.1.4.1.3711.24.1.1.4.2.1.9 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Set to open the door. | |||||||||||||||||
| CkpInUseTrapEn | 1.3.6.1.4.1.3711.24.1.1.4.2.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current 'keypad in use' trap enable
| |||||||||||||||||
| Nacus | 1.3.6.1.4.1.3711.24.1.1.5 | ||||||||||||||||
| NacuEnable | 1.3.6.1.4.1.3711.24.1.1.5.1 | ||||||||||||||||
| SacuSelect | 1.3.6.1.4.1.3711.24.1.1.5.1.1 | INTEGER (0..24) | RW | ||||||||||||||
scalar · INTEGER (0..24) · read-write · current Selects the ACU to be enabled or disabled by acuEnable. A value of 0 selects no ACU. | |||||||||||||||||
| SacuInsert | 1.3.6.1.4.1.3711.24.1.1.5.1.2 | EnableState | RW | ||||||||||||||
scalar · EnableState · read-write · current Enables or disables the ACU selected by acuSelect - causes an entry for that ACU to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TacuCtlTable | 1.3.6.1.4.1.3711.24.1.1.5.2 | NA | |||||||||||||||
table · not-accessible · current A table listing the parameters and data for the ACUs. | |||||||||||||||||
| RacuCtlEntry | 1.3.6.1.4.1.3711.24.1.1.5.2.1 | NA | |||||||||||||||
| CacuNumber | 1.3.6.1.4.1.3711.24.1.1.5.2.1.1 | INTEGER (1..6) | RO | ||||||||||||||
column · INTEGER (1..6) · read-only · current The ACU number. | |||||||||||||||||
| CacuCtlRS | 1.3.6.1.4.1.3711.24.1.1.5.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The ACU table row status. | |||||||||||||||||
| CacuManufacturer | 1.3.6.1.4.1.3711.24.1.1.5.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The name of the manufacturer of the ACU. | |||||||||||||||||
| CacuName | 1.3.6.1.4.1.3711.24.1.1.5.2.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A name identifying the ACU. | |||||||||||||||||
| CacuDoorLatchTimeOut | 1.3.6.1.4.1.3711.24.1.1.5.2.1.5 | Unsigned32 (0..999) | RW | ||||||||||||||
column · Unsigned32 (0..999) · read-write · current Time-out value in seconds for which the door latch is held open. | |||||||||||||||||
| CacuRtnToStndbyTimeOut | 1.3.6.1.4.1.3711.24.1.1.5.2.1.6 | INTEGER (0..999) | RW | ||||||||||||||
column · INTEGER (0..999) · read-write · current Time-out value in seconds for Return to Standby Mode | |||||||||||||||||
| CacuEntryCodeValid | 1.3.6.1.4.1.3711.24.1.1.5.2.1.7 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Set if previous ACU entry was valid. | |||||||||||||||||
| CacuDoorOpenTimeOut | 1.3.6.1.4.1.3711.24.1.1.5.2.1.8 | INTEGER (0..3600) | RW | ||||||||||||||
column · INTEGER (0..3600) · read-write · current Time-out value in seconds for Door Open. | |||||||||||||||||
| CacuRemoteDoorOpen | 1.3.6.1.4.1.3711.24.1.1.5.2.1.9 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Set to open the door. | |||||||||||||||||
| CacuInUseTrapEn | 1.3.6.1.4.1.3711.24.1.1.5.2.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current 'ACU in use' trap enable
| |||||||||||||||||
| CacuType | 1.3.6.1.4.1.3711.24.1.1.5.2.1.11 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the ACU type. | |||||||||||||||||
| CacuAlarms | 1.3.6.1.4.1.3711.24.1.1.5.2.1.12 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current A bit field flagging ACU alarms. | |||||||||||||||||
| CacuLastCode | 1.3.6.1.4.1.3711.24.1.1.5.2.1.13 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The last key code read from the ACU. After this is consumed, write an empty string to clear the contents. | |||||||||||||||||
| Naccess | 1.3.6.1.4.1.3711.24.1.1.6 | ||||||||||||||||
| NaccUserCtl | 1.3.6.1.4.1.3711.24.1.1.6.1 | ||||||||||||||||
| SaccUserInstance | 1.3.6.1.4.1.3711.24.1.1.6.1.1 | INTEGER (0..20) | RW | ||||||||||||||
scalar · INTEGER (0..20) · read-write · current A value of 0 causes an access user to be created in the relevant tables. A non-zero value causes the nominated access user table entries to be deleted. | |||||||||||||||||
| TaccUserTable | 1.3.6.1.4.1.3711.24.1.1.6.1.2 | NA | |||||||||||||||
table · not-accessible · current A table controlling the access users. | |||||||||||||||||
| RaccUserEntry | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one ACU user.
| |||||||||||||||||
| CaccUserNumber | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The the access user-table entry number. | |||||||||||||||||
| CaccUserRS | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The access user table row status. | |||||||||||||||||
| CaccUserName | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A name identifying the access user. | |||||||||||||||||
| CaccUserCode | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.4 | OCTET STRING (SIZE (0..15)) | RW | ||||||||||||||
column · OCTET STRING (SIZE (0..15)) · read-write · current The user's access code. | |||||||||||||||||
| CaccUserPrivileges | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.5 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The ACUs and keypads that the user is allowed to gain access through - comma-separated numerical strings. | |||||||||||||||||
| CaccUserExpires | 1.3.6.1.4.1.3711.24.1.1.6.1.2.1.6 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A text string which specifies when the access code in the row expires. The format is defined by the application. | |||||||||||||||||
| SaccUserSetup | 1.3.6.1.4.1.3711.24.1.1.6.1.3 | OCTET STRING | RW | ||||||||||||||
scalar · OCTET STRING · read-write · current A free form octet string for programming accUserTable. The format is defined by the application. | |||||||||||||||||
| SaccUserCodeLen | 1.3.6.1.4.1.3711.24.1.1.6.1.4 | INTEGER (1..15) | RO | ||||||||||||||
scalar · INTEGER (1..15) · read-only · current A value of the PIN code length | |||||||||||||||||
| Npdus | 1.3.6.1.4.1.3711.24.1.1.7 | ||||||||||||||||
| NpduCommon | 1.3.6.1.4.1.3711.24.1.1.7.1 | ||||||||||||||||
| NpdusEnable | 1.3.6.1.4.1.3711.24.1.1.7.1.1 | ||||||||||||||||
| SpduSelect | 1.3.6.1.4.1.3711.24.1.1.7.1.1.1 | INTEGER (0..24) | RW | ||||||||||||||
scalar · INTEGER (0..24) · read-write · current Selects the PDU to be enabled or disabled by pduInsert. A value of 0 selects no PDU. | |||||||||||||||||
| SpduInsert | 1.3.6.1.4.1.3711.24.1.1.7.1.1.2 | EnableState | RW | ||||||||||||||
scalar · EnableState · read-write · current Enables or disables the PDU selected by pduSelect - causes an entry for that PDU to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TpduTable | 1.3.6.1.4.1.3711.24.1.1.7.1.2 | NA | |||||||||||||||
table · not-accessible · current A table containing information about each enabled PDU. | |||||||||||||||||
| RpduEntry | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1 | NA | |||||||||||||||
| CpduNumber | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduRS | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduName | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the PDU. | |||||||||||||||||
| CpduOutEn | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.4 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables/disables PDU power outlet control - causes an entry for outlets to be created in each relevant PDU table. | |||||||||||||||||
| CpduMonEn | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.5 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables/disables PDU power monitoring - causes an entry for monitoring to be created in each relevant PDU table. | |||||||||||||||||
| CpduCommsFail | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.6 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates comms. status for the PDU.
| |||||||||||||||||
| CpduType | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.7 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates the type of device connected.
| |||||||||||||||||
| CpduMode | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates the phase circuit topology.
| |||||||||||||||||
| CpduNumControl | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.9 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Indicates the number of controlled outlets. | |||||||||||||||||
| CpduOutletMonMode | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.10 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates the monitor mode.
| |||||||||||||||||
| CpduNumOutlets | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.11 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Indicates the number of monitored outlets. | |||||||||||||||||
| CpduFwVersCPU | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.12 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the PDU processor firmware version. | |||||||||||||||||
| CpduFwVersMeter | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.13 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the PDU meter firmware version. | |||||||||||||||||
| CpduNumOfCctBrks | 1.3.6.1.4.1.3711.24.1.1.7.1.2.1.14 | INTEGER (0..9) | RW | ||||||||||||||
column · INTEGER (0..9) · read-write · current Indicates the number of monitored branch circuits. | |||||||||||||||||
| SpdusMinMaxPeriod | 1.3.6.1.4.1.3711.24.1.1.7.1.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Configures the polling period for the PDU max/min values.
| |||||||||||||||||
| NpduOutlets | 1.3.6.1.4.1.3711.24.1.1.7.2 | ||||||||||||||||
| NpduOutAll | 1.3.6.1.4.1.3711.24.1.1.7.2.1 | ||||||||||||||||
| SpduOutCycleAll | 1.3.6.1.4.1.3711.24.1.1.7.2.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Sets the required state of all power outlets on all connected PDUs.
| |||||||||||||||||
| SpduOutCycleAllPwd | 1.3.6.1.4.1.3711.24.1.1.7.2.1.2 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Controls access to setting the required state of all power outlets on all connected PDUs. | |||||||||||||||||
| SpduOutCycleAllAbort | 1.3.6.1.4.1.3711.24.1.1.7.2.1.3 | Unsigned32 | RW | ||||||||||||||
scalar · Unsigned32 · read-write · current Abort command for pduOutCycleAll. | |||||||||||||||||
| SpduOutGlobalCycleDelay | 1.3.6.1.4.1.3711.24.1.1.7.2.1.4 | Unsigned32 (1..60) | RW | ||||||||||||||
scalar · Unsigned32 (1..60) · read-write · current Sets the delay period for pduOutCycleAll and pduOutCycle commands before they start to execute. | |||||||||||||||||
| SpduOutGlobalRebootTime | 1.3.6.1.4.1.3711.24.1.1.7.2.1.5 | Unsigned32 (5..300) | RW | ||||||||||||||
scalar · Unsigned32 (5..300) · read-write · current Sets the off to on delay period for a pdu outlet reboot. | |||||||||||||||||
| SpduOutGlobalCycleAbortTime | 1.3.6.1.4.1.3711.24.1.1.7.2.1.6 | Unsigned32 (0..60) | RW | ||||||||||||||
scalar · Unsigned32 (0..60) · read-write · current Time delay to abort power outlet setting task. | |||||||||||||||||
| TpduOutCmnTable | 1.3.6.1.4.1.3711.24.1.1.7.2.2 | NA | |||||||||||||||
table · not-accessible · current A table containing information about the power outlets of all PDUs enabled for outlet control. | |||||||||||||||||
| RpduOutCmnEntry | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about the power outlets of one PDU.
| |||||||||||||||||
| CpduOutCmnPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduOutCmnRS | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduNumOfOutlets | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.3 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The number of switchable outlets on the PDU - determines the number of entries to be created in the outlet table for the relevant PDU. | |||||||||||||||||
| CpduOutCycle | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Sets the required state of all power outlets on the PDU.
| |||||||||||||||||
| CpduOutCyclePwd | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.5 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current Password controling access to setting the required state of all power outlets on the PDU. | |||||||||||||||||
| CpduOutCycleAbortTask | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.6 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Abort power outlet setting task. | |||||||||||||||||
| CpduOutCycleAbortTime | 1.3.6.1.4.1.3711.24.1.1.7.2.2.1.7 | Unsigned32 (0..60) | RW | ||||||||||||||
column · Unsigned32 (0..60) · read-write · current Time delay to abort power outlet setting task. | |||||||||||||||||
| TpduOutTable | 1.3.6.1.4.1.3711.24.1.1.7.2.3 | NA | |||||||||||||||
table · not-accessible · current A table listing the states and descriptions for each outlet on the PDU. | |||||||||||||||||
| RpduOutEntry | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1 | NA | |||||||||||||||
row · not-accessible · current A row containing information about one PDU outlet.
| |||||||||||||||||
| CpduOutPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number on which the outlet resides. | |||||||||||||||||
| CpduOutNumber | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The outlet number. | |||||||||||||||||
| CpduOutRS | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduOutName | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A name identifying the outlet. | |||||||||||||||||
| CpduOutOn | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The current state for this outlet.
| |||||||||||||||||
| CpduOutPwd | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.6 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The password for this outlet. | |||||||||||||||||
| CpduOutCycleDelay | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The on/off delay for this outlet in seconds. | |||||||||||||||||
| CpduOutRebootPeriod | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.8 | Unsigned32 (5..300) | RO | ||||||||||||||
column · Unsigned32 (5..300) · read-only · current The pduOutOn reboot off period for this outlet in seconds. | |||||||||||||||||
| CpduOutRMSAmpsValue | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.9 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current RMS current value at the outlet in 0.1 Amps | |||||||||||||||||
| CpduOutRMSAmpsSurge | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.10 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Maximum value of pduOutRMSAmpsValue for another outlet to be switched on in 0.1 Amps | |||||||||||||||||
| CpduOutRMSAmpsPeak | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.11 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Maximum value of pduOutRMSAmpsValue since reset in 0.1 Amps | |||||||||||||||||
| CpduOutRMSAmpsPkRst | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.12 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Resets value of pduOutRMSAmpsPeak to current value of pduOutRMSAmpsValue | |||||||||||||||||
| CpduOutMeanKVAValue | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.13 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Mean kVA value at the outlet in 0.1 kVA | |||||||||||||||||
| CpduOutKWHrValue | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.14 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current kWhr value at the outlet in 0.1 kWhr | |||||||||||||||||
| CpduOutPFactorValue | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.15 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Power factor value at the outlet in 0.01 units | |||||||||||||||||
| CpduOutRMSAmpsUTL | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.16 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current Upper threshold of pduOutRMSAmpsValue in 0.1 Amps | |||||||||||||||||
| CpduOutRMSAmpsLTL | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.17 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current Lower threshold of pduOutRMSAmpsValue in 0.1 Amps | |||||||||||||||||
| CpduOutRMSAmpsUTLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.18 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduOutRMSAmpsUTL. | |||||||||||||||||
| CpduOutRMSAmpsLTLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.19 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduOutRMSAmpsLTL. | |||||||||||||||||
| CpduOutRMSAmpsUTLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.20 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduOutRMSAmpsUTL. | |||||||||||||||||
| CpduOutRMSAmpsLTLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.2.3.1.21 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduOutRMSAmpsLTL. | |||||||||||||||||
| NpduMonitor | 1.3.6.1.4.1.3711.24.1.1.7.3 | ||||||||||||||||
| TpduMonTable | 1.3.6.1.4.1.3711.24.1.1.7.3.1 | NA | |||||||||||||||
table · not-accessible · current A table containing monitor information for all PDUs enabled for monitoring. | |||||||||||||||||
| RpduMonEntry | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing monitor information for one PDU.
| |||||||||||||||||
| CpduMonPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduMonRS | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduRMSVoltsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current RMS Volts across load in Volts | |||||||||||||||||
| CpduRMSAmpsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current RMS current through load in 0.1 Amps | |||||||||||||||||
| CpduTotalEnergyValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Total energy supplied to load in 0.1 kWh | |||||||||||||||||
| CpduMeanKVAValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.6 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Kilo Volt-Amperes supplied to load in 0.1 kVA | |||||||||||||||||
| CpduMeanKWattsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.7 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Kilo Watts supplied to load in 0.1 kW | |||||||||||||||||
| CpduPwrFactorValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Power factor of load in 0.01 | |||||||||||||||||
| CpduPwrSupplyFreq | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.9 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Power supply frequency in 0.1Hz | |||||||||||||||||
| CpduPhaseVoltsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.10 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current RMS Volts across phase in Volts | |||||||||||||||||
| CpduPhaseAmpsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.11 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current RMS current supplied by phase in 0.1 Amps | |||||||||||||||||
| CpduPhaseEnergyValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.12 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Total energy supplied by phase in 0.1 kWh | |||||||||||||||||
| CpduPhaseKVAValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.13 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Apparent power supplied by phase in 0.1 kVA | |||||||||||||||||
| CpduPhaseKWattsValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.14 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current True power supplied by phase in 0.1 kW | |||||||||||||||||
| CpduPhasePwrFactorValue | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.15 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Power factor of phase in 0.01 | |||||||||||||||||
| CpduCircuitName | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.16 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the circuit. | |||||||||||||||||
| CpduCctKVAMax | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.17 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Maximum apparent power in circuit for measurment period in 0.1 kVA | |||||||||||||||||
| CpduCctKVAMaxTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.18 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for maximum apparent power in circuit | |||||||||||||||||
| CpduCctKVAMin | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.19 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Minimum apparent power in circuit for measurment period in 0.1 kVA | |||||||||||||||||
| CpduCctKVAMinTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.20 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for mniimum apparent power in circuit | |||||||||||||||||
| CpduCctAmpsMax | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.21 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Maximum current in circuit for measurment period in 0.1 kVA | |||||||||||||||||
| CpduCctAmpsMaxTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.22 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for maximum current in circuit | |||||||||||||||||
| CpduCctAmpsMin | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.23 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Minimum current in circuit for measurment period in 0.1 kVA | |||||||||||||||||
| CpduCctAmpsMinTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.24 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for minimum current in circuit | |||||||||||||||||
| CpduCctStatSagSet | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.25 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Sag status is set in this circuit | |||||||||||||||||
| CpduCctStatSagCount | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.26 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Sag status count in this circuit | |||||||||||||||||
| CpduCctStatSagTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.27 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for sag status in this circuit | |||||||||||||||||
| CpduCctStatPkVoltsSet | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.28 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Peak Volts status is set in this circuit | |||||||||||||||||
| CpduCctStatPkVoltsCount | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.29 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Peak Volts status count in this circuit | |||||||||||||||||
| CpduCctStatPkVoltsTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.30 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for Peak Volts status in this circuit | |||||||||||||||||
| CpduCctStatPwrLossSet | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.31 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current Power Loss status is set in this circuit | |||||||||||||||||
| CpduCctStatPwrLossCount | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.32 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Power Loss status count in this circuit | |||||||||||||||||
| CpduCctStatPwrLossTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.33 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for Power Loss status in this circuit | |||||||||||||||||
| CpduCctPermKVAMax | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.34 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Maximum apparent power in circuit since last reset in 0.1 kVA | |||||||||||||||||
| CpduCctPermKVAMaxTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.35 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for maximum apparent power in circuit since last reset | |||||||||||||||||
| CpduCctPermAmpsMax | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.36 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Minimum apparent power in circuit since last reset in 0.1 kVA | |||||||||||||||||
| CpduCctPermAmpsMaxTime | 1.3.6.1.4.1.3711.24.1.1.7.3.1.1.37 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Timestamp for minimum apparent power in circuit since last reset | |||||||||||||||||
| TpduTrapThreshTable | 1.3.6.1.4.1.3711.24.1.1.7.3.2 | NA | |||||||||||||||
table · not-accessible · current A table containing information about the trap threshold values for all PDUs enabled for monitoring. | |||||||||||||||||
| RpduTrapThreshEntry | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about the trap threshold values for one PDU. | |||||||||||||||||
| CpduTrapThreshPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduTrapThreshRS | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduRMSVoltsUCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.3 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current rms UCL value in volts | |||||||||||||||||
| CpduRMSVoltsUWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.4 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current rms UWL value in volts | |||||||||||||||||
| CpduRMSVoltsLWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.5 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current rms LWL value in volts | |||||||||||||||||
| CpduRMSVoltsLCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.6 | INTEGER (-10..500) | RW | ||||||||||||||
column · INTEGER (-10..500) · read-write · current rms LCL value in volts | |||||||||||||||||
| CpduRMSAmpsUCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.7 | INTEGER (-10..5000) | RW | ||||||||||||||
column · INTEGER (-10..5000) · read-write · current rms UCL value in 0.1 amps | |||||||||||||||||
| CpduRMSAmpsUWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.8 | INTEGER (-10..5000) | RW | ||||||||||||||
column · INTEGER (-10..5000) · read-write · current rms UWL value in 0.1 amps | |||||||||||||||||
| CpduRMSAmpsLWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.9 | INTEGER (-10..5000) | RW | ||||||||||||||
column · INTEGER (-10..5000) · read-write · current rms LWL value in 0.1 amps | |||||||||||||||||
| CpduRMSAmpsLCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.10 | INTEGER (-10..5000) | RW | ||||||||||||||
column · INTEGER (-10..5000) · read-write · current rms LCL value in 0.1 amps | |||||||||||||||||
| CpduEnergyUCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.11 | Unsigned32 (0..4294967290) | RW | ||||||||||||||
column · Unsigned32 (0..4294967290) · read-write · current Total energy UCL value in 0.1 kWh | |||||||||||||||||
| CpduEnergyUWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.12 | Unsigned32 (0..4294967290) | RW | ||||||||||||||
column · Unsigned32 (0..4294967290) · read-write · current Total energy UWL value in 0.1 kWh | |||||||||||||||||
| CpduMeanKVAUCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.13 | INTEGER (0..999990) | RW | ||||||||||||||
column · INTEGER (0..999990) · read-write · current Mean kVA UCL value in 0.1 kVA | |||||||||||||||||
| CpduMeanKVAUWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.14 | INTEGER (0..999990) | RW | ||||||||||||||
column · INTEGER (0..999990) · read-write · current Mean kVA UWL value in 0.1 kVA | |||||||||||||||||
| CpduMeanKVALWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.15 | INTEGER (0..999990) | RW | ||||||||||||||
column · INTEGER (0..999990) · read-write · current Mean kVA LWL value in 0.1 kVA | |||||||||||||||||
| CpduMeanKVALCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.16 | INTEGER (0..999990) | RW | ||||||||||||||
column · INTEGER (0..999990) · read-write · current Mean kVA LCL value in 0.1 kVA | |||||||||||||||||
| CpduMeanKWattsUCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.17 | INTEGER (0..100000) | RW | ||||||||||||||
column · INTEGER (0..100000) · read-write · current Mean power UCL value in 0.1 kW | |||||||||||||||||
| CpduMeanKWattsUWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.18 | INTEGER (0..100000) | RW | ||||||||||||||
column · INTEGER (0..100000) · read-write · current Mean power UWL value in 0.1 kW | |||||||||||||||||
| CpduMeanKWattsLWL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.19 | INTEGER (0..100000) | RW | ||||||||||||||
column · INTEGER (0..100000) · read-write · current Mean power LWL value in 0.1 kW | |||||||||||||||||
| CpduMeanKWattsLCL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.20 | INTEGER (0..100000) | RW | ||||||||||||||
column · INTEGER (0..100000) · read-write · current Mean power LCL value in 0.1 kW | |||||||||||||||||
| CpduPwrFactorUTL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.21 | INTEGER (0..100) | RW | ||||||||||||||
column · INTEGER (0..100) · read-write · current Power factor UTL value in 0.01 | |||||||||||||||||
| CpduPwrFactorLTL | 1.3.6.1.4.1.3711.24.1.1.7.3.2.1.22 | INTEGER (0..100) | RW | ||||||||||||||
column · INTEGER (0..100) · read-write · current Power factor LTL value in 0.01 | |||||||||||||||||
| TpduTrapEnTable | 1.3.6.1.4.1.3711.24.1.1.7.3.3 | NA | |||||||||||||||
table · not-accessible · current The table which controls threshold value trap enabling for all PDUs enabled for monitoring. | |||||||||||||||||
| RpduTrapEnEntry | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one PDU.
| |||||||||||||||||
| CpduTrapEnPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduTrapEnRS | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduRMSVoltsUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.3 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables Volts UCL trap. | |||||||||||||||||
| CpduRMSVoltsUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.4 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables UWL Volts trap. | |||||||||||||||||
| CpduRMSVoltsLWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.5 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables LWL Volts trap. | |||||||||||||||||
| CpduRMSVoltsLCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.6 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables LCL Volts trap. | |||||||||||||||||
| CpduRMSAmpsUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.7 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables UCL current trap. | |||||||||||||||||
| CpduRMSAmpsUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.8 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables UWL current trap. | |||||||||||||||||
| CpduRMSAmpsLWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.9 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables LWL current trap. | |||||||||||||||||
| CpduRMSAmpsLCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.10 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables LCL current trap. | |||||||||||||||||
| CpduEnergyUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.11 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables UCL total energy trap. | |||||||||||||||||
| CpduEnergyUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.12 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables UWL total energy trap. | |||||||||||||||||
| CpduMeanKVAUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.13 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean kVA UCL trap. | |||||||||||||||||
| CpduMeanKVAUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.14 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean kVA UWL trap. | |||||||||||||||||
| CpduMeanKVALWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.15 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean kVA LWL trap. | |||||||||||||||||
| CpduMeanKVALCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.16 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean kVA LCL trap. | |||||||||||||||||
| CpduMeanKWattsUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.17 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean power UCL trap. | |||||||||||||||||
| CpduMeanKWattsUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.18 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean power UWL trap. | |||||||||||||||||
| CpduMeanKWattsLWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.19 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean power LWL trap. | |||||||||||||||||
| CpduMeanKWattsLCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.20 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables mean power LCL trap. | |||||||||||||||||
| CpduPwrFactorUTLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.21 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables power factor UTL trap. | |||||||||||||||||
| CpduPwrFactorLTLTrapEn | 1.3.6.1.4.1.3711.24.1.1.7.3.3.1.22 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Enables power factor LTL trap. | |||||||||||||||||
| TpduTrapPerTable | 1.3.6.1.4.1.3711.24.1.1.7.3.4 | NA | |||||||||||||||
table · not-accessible · current The table which controls threshold value trap repetition for all PDUs enabled for monitoring. | |||||||||||||||||
| RpduTrapPerEntry | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one PDU.
| |||||||||||||||||
| CpduTrapPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| CpduTrapPerRS | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| CpduRMSVoltsUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.3 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UCL Volts trap repeat rate in seconds | |||||||||||||||||
| CpduRMSVoltsUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.4 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UWL Volts trap repeat rate in seconds | |||||||||||||||||
| CpduRMSVoltsLWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.5 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets LWL Volts trap repeat rate in seconds | |||||||||||||||||
| CpduRMSVoltsLCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.6 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets LCL Volts trap repeat rate in seconds | |||||||||||||||||
| CpduRMSAmpsUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.7 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UCL current trap repeat rate in seconds | |||||||||||||||||
| CpduRMSAmpsUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.8 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UWL current trap repeat rate in seconds | |||||||||||||||||
| CpduRMSAmpsLWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.9 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets LWL current trap repeat rate in seconds | |||||||||||||||||
| CpduRMSAmpsLCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.10 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets LCL current trap repeat rate in seconds | |||||||||||||||||
| CpduEnergyUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.11 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UCL total energy trap repeat rate in seconds | |||||||||||||||||
| CpduEnergyUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.12 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets UWL total energy trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKVAUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.13 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean kVA UCL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKVAUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.14 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean kVA UWL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKVALWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.15 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean kVA LWL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKVALCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.16 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean kVA LCL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKWattsUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.17 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean power UCL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKWattsUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.18 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean power UWL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKWattsLWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.19 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean power LWL trap repeat rate in seconds | |||||||||||||||||
| CpduMeanKWattsLCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.20 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets mean power LCL trap repeat rate in seconds | |||||||||||||||||
| CpduPwrFactorUTLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.21 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets power factor UTL trap repeat rate in seconds | |||||||||||||||||
| CpduPwrFactorLTLTrapPer | 1.3.6.1.4.1.3711.24.1.1.7.3.4.1.22 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Sets power factor LTL trap repeat rate in seconds | |||||||||||||||||
| TpduMon3PhTable | 1.3.6.1.4.1.3711.24.1.1.7.3.5 | NA | |||||||||||||||
table · not-accessible · current A table containing monitor information for all 3-phase PDUs enabled for monitoring. | |||||||||||||||||
| RpduMon3PhEntry | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing monitor information for one 3-phase PDU.
| |||||||||||||||||
| Cpdu3PhPduNumber | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU number. | |||||||||||||||||
| Cpdu3PhRS | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| Cpdu3PhMode | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Three phase topology
| |||||||||||||||||
| Cpdu3PhVoltsC1 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Line RMS Volts value in volts | |||||||||||||||||
| Cpdu3PhAmpsL1 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Phase RMS current value in 0.1 Amps | |||||||||||||||||
| Cpdu3PhVoltsC2 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.6 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Line RMS Volts value in volts | |||||||||||||||||
| Cpdu3PhAmpsL2 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.7 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Phase RMS current value in 0.1 Amps | |||||||||||||||||
| Cpdu3PhVoltsC3 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Line RMS Volts value in volts | |||||||||||||||||
| Cpdu3PhAmpsL3 | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.9 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Phase RMS current value in 0.1 Amps | |||||||||||||||||
| Cpdu3PhAmpsAgg | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.10 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Total RMS current value in 0.1 Amps | |||||||||||||||||
| Cpdu3PhkVAAgg | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.11 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Total apparent power value in 0.1 kVA | |||||||||||||||||
| Cpdu3PhkWAgg | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.12 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Total true power value in 0.1 kVW | |||||||||||||||||
| Cpdu3PhkVArhAgg | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.13 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Total re-active energy value in 0.1 kVArh | |||||||||||||||||
| Cpdu3PhkWhAgg | 1.3.6.1.4.1.3711.24.1.1.7.3.5.1.14 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current Total true energy value in 0.1 kWh | |||||||||||||||||
| NpduGangs | 1.3.6.1.4.1.3711.24.1.1.7.4 | ||||||||||||||||
| NpduGangsEnable | 1.3.6.1.4.1.3711.24.1.1.7.4.1 | ||||||||||||||||
| SpduGangsSelect | 1.3.6.1.4.1.3711.24.1.1.7.4.1.1 | INTEGER (0..24) | RW | ||||||||||||||
scalar · INTEGER (0..24) · read-write · current Selects the PDU gang to be enabled or disabled by pduEnable. A value of 0 selects no PDU gang. | |||||||||||||||||
| SpduGangsInsert | 1.3.6.1.4.1.3711.24.1.1.7.4.1.2 | EnableState | RW | ||||||||||||||
scalar · EnableState · read-write · current Enables or disables the PDU gang selected by pduGangsSelect - causes an entry for that PDU gang to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TpduGangTable | 1.3.6.1.4.1.3711.24.1.1.7.4.2 | NA | |||||||||||||||
table · not-accessible · current A table containing information about each pdu gang. | |||||||||||||||||
| RpduGangEntry | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one pdu gang.
| |||||||||||||||||
| CpduGangNumber | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.1 | INTEGER (1..24) | RO | ||||||||||||||
column · INTEGER (1..24) · read-only · current The pdu gang number. | |||||||||||||||||
| CpduGangRS | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The gang table row status. | |||||||||||||||||
| CpduGangEn | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Shows whether the gang is enabled(1), disabled(2) or suspended(3) this may have been disabled by the application e.g. disabled pdu's in the gang, or bad pdu outlet CRC.
| |||||||||||||||||
| CpduGangName | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current The name of this gang. | |||||||||||||||||
| CpduGangOn | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The current state for this gang. Only states 1(on) ,2(off) and 4(reboot) can be set.
| |||||||||||||||||
| CpduGangPassword | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.6 | DisplayString (SIZE (0..16)) | RW | ||||||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current The password required to control this gang. | |||||||||||||||||
| CpduGangAbortTask | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.7 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Abort gang setting task. | |||||||||||||||||
| CpduGangMembers | 1.3.6.1.4.1.3711.24.1.1.7.4.2.1.8 | DisplayString (SIZE (0..37)) | RW | ||||||||||||||
column · DisplayString (SIZE (0..37)) · read-write · current A string representing the members of a gang. The format is PDU:OUTLET; e.g. 1:3;4:2;5:12;3:18; up to 6 member pairs | |||||||||||||||||
| Nexpansion | 1.3.6.1.4.1.3711.24.1.1.8 | ||||||||||||||||
| NexpEnable | 1.3.6.1.4.1.3711.24.1.1.8.1 | ||||||||||||||||
| SexpSelect | 1.3.6.1.4.1.3711.24.1.1.8.1.1 | INTEGER (0..2) | RW | ||||||||||||||
scalar · INTEGER (0..2) · read-write · current Selects the Expansion Port to be enabled or disabled by expInsert. A value of 0 selects no Expansion Port. | |||||||||||||||||
| SexpInsert | 1.3.6.1.4.1.3711.24.1.1.8.1.2 | ExternalUnitType | RW | ||||||||||||||
scalar · ExternalUnitType · read-write · current Enables or disables the Expansion Port selected by expSelect - causes an entry for that Expansion Port to be created or deleted in the relevant tables. - Read behaviour is undefined. | |||||||||||||||||
| TexpTable | 1.3.6.1.4.1.3711.24.1.1.8.2 | NA | |||||||||||||||
table · not-accessible · current A table containing information about each enabled Expansion Port. | |||||||||||||||||
| RexpEntry | 1.3.6.1.4.1.3711.24.1.1.8.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one Expansion Port.
| |||||||||||||||||
| CexpNumber | 1.3.6.1.4.1.3711.24.1.1.8.2.1.1 | INTEGER (1..2) | RO | ||||||||||||||
column · INTEGER (1..2) · read-only · current The Expansion Port number; maps to the specific Expansion Port connector. | |||||||||||||||||
| CexpRS | 1.3.6.1.4.1.3711.24.1.1.8.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The Expansion Port table row status. | |||||||||||||||||
| CexpName | 1.3.6.1.4.1.3711.24.1.1.8.2.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string identifying the Expansion Port. | |||||||||||||||||
| CexpType | 1.3.6.1.4.1.3711.24.1.1.8.2.1.4 | ExternalUnitType | RW | ||||||||||||||
column · ExternalUnitType · read-write · current Indicates the External Unit type. | |||||||||||||||||
| CexpCommsFail | 1.3.6.1.4.1.3711.24.1.1.8.2.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates Comms. Status for the Expansion Port.
| |||||||||||||||||
| Nclamp | 1.3.6.1.4.1.3711.24.1.1.9 | ||||||||||||||||
| TclampTable | 1.3.6.1.4.1.3711.24.1.1.9.1 | NA | |||||||||||||||
table · not-accessible · current A table containing information about each detected CL-amp unit. | |||||||||||||||||
| RclampEntry | 1.3.6.1.4.1.3711.24.1.1.9.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about one CL-amp unit.
| |||||||||||||||||
| CclampNumber | 1.3.6.1.4.1.3711.24.1.1.9.1.1.1 | INTEGER (1..24) | RO | ||||||||||||||
column · INTEGER (1..24) · read-only · current The CL-Amp number; maps to the specific CL-Amp Port. | |||||||||||||||||
| CclampRS | 1.3.6.1.4.1.3711.24.1.1.9.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The CL-Amp table row status. | |||||||||||||||||
| CclampBValue | 1.3.6.1.4.1.3711.24.1.1.9.1.1.3 | Unsigned32 (20000..150000) | RW | ||||||||||||||
column · Unsigned32 (20000..150000) · read-write · current Stores the value of the CL-amp unit B Value configuration. This may have been set by the management station or read from the CL-amp unit depending on recent history. Value is x 1000. | |||||||||||||||||
| CclampVolts | 1.3.6.1.4.1.3711.24.1.1.9.1.1.4 | Unsigned32 (90..250) | RW | ||||||||||||||
column · Unsigned32 (90..250) · read-write · current Stores the value of the CL-amp unit Volts configuration. This may have been set by the management station or read from the CL-amp unit depending on recent history. Value is in Volts. | |||||||||||||||||
| CclampPwrFactor | 1.3.6.1.4.1.3711.24.1.1.9.1.1.5 | Unsigned32 (0..100) | RW | ||||||||||||||
column · Unsigned32 (0..100) · read-write · current Stores the value of the CL-amp unit Power Factor configuration. This may have been set by the management station or read from the CL-amp unit depending on recent history. Value is x100. | |||||||||||||||||
| CclampFrequency | 1.3.6.1.4.1.3711.24.1.1.9.1.1.6 | Unsigned32 (450..650) | RW | ||||||||||||||
column · Unsigned32 (450..650) · read-write · current Stores the value of the CL-amp unit Frequency configuration. This may have been set by the management station or read from the CL-amp unit depending on recent history. Value is Hz x10. | |||||||||||||||||
| CclampWriteParams | 1.3.6.1.4.1.3711.24.1.1.9.1.1.15 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current When written to, sends the configuration values stored in this table for writing to the CL-amp unit. | |||||||||||||||||
| Nidm | 1.3.6.1.4.1.3711.24.1.1.10 | ||||||||||||||||
| TidmTable | 1.3.6.1.4.1.3711.24.1.1.10.1 | NA | |||||||||||||||
table · not-accessible · current A table containing information about IDMs | |||||||||||||||||
| RidmEntry | 1.3.6.1.4.1.3711.24.1.1.10.1.1 | NA | |||||||||||||||
| CidmNumber | 1.3.6.1.4.1.3711.24.1.1.10.1.1.1 | INTEGER (1..2) | RO | ||||||||||||||
column · INTEGER (1..2) · read-only · current The IDM number; maps to the specific IDM Port. | |||||||||||||||||
| CidmRS | 1.3.6.1.4.1.3711.24.1.1.10.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The IDM table row status. | |||||||||||||||||
| CidmVersion | 1.3.6.1.4.1.3711.24.1.1.10.1.1.3 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current Version information returned by the IDM. | |||||||||||||||||
| CidmStatus | 1.3.6.1.4.1.3711.24.1.1.10.1.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Indicates status of the IDM.
| |||||||||||||||||
| NpdusP2 | 1.3.6.1.4.1.3711.24.1.1.11 | ||||||||||||||||
| NpduP2BrCct | 1.3.6.1.4.1.3711.24.1.1.11.1 | ||||||||||||||||
| TpduP2BrCctMonitorTable | 1.3.6.1.4.1.3711.24.1.1.11.1.1 | NA | |||||||||||||||
table · not-accessible · current A table giving branch circuit monitoring information for all PDUs. | |||||||||||||||||
| RpduP2BrCctMonitorEntry | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about branch circuit monitoring. | |||||||||||||||||
| CpduP2BrCktMonPduNumber | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| CpduP2BrCktMonBrCctNumber | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.2 | Unsigned32 (1..9) | RO | ||||||||||||||
column · Unsigned32 (1..9) · read-only · current The PDU Branch Circuit Number. | |||||||||||||||||
| CpduP2BrCktMonRS | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The branch circuit monitor table row status. | |||||||||||||||||
| CpduP2BrCktMonBrCctID | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The PDU Branch Circuit ID. | |||||||||||||||||
| CpduP2BrCktMonBrCctPhases | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.5 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The PDU Branch Circuit Phases. | |||||||||||||||||
| CpduP2BrCktMonBrCctCurrent | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktMonBrCctPeakCurrent | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Peak Current. The value precision is hundredths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktMonBrCctPeakCurrentTimestamp | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.8 | UnsignedTimeTicks | RO | ||||||||||||||
column · UnsignedTimeTicks · read-only · current The PDU Branch Circuit Peak Current Timestamp. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerStatus | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.9 | BranchCircuitStatusType | RO | ||||||||||||||
column · BranchCircuitStatusType · read-only · current The PDU Branch Circuit Breaker Status. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerConfig | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.10 | BranchCircuitConfigType | RW | ||||||||||||||
column · BranchCircuitConfigType · read-write · current The PDU Branch Circuit Breaker Config. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerTripState | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.11 | BranchCircuitStatusType | RO | ||||||||||||||
column · BranchCircuitStatusType · read-only · current The PDU Branch Circuit Breaker Trip State. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerContinuousLoadRatingAmps | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.12 | Unsigned32 (1..100000) | RW | ||||||||||||||
column · Unsigned32 (1..100000) · read-write · current The PDU Branch Circuit Breaker Continuous Load Rating Amps.The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerTripRatingAmps | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.13 | Unsigned32 (1..100000) | RW | ||||||||||||||
column · Unsigned32 (1..100000) · read-write · current The PDU Branch Circuit Breaker Trip Rating Amps. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktMonBrCctBreakerOutletMap | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.14 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current A string representing the outlets of a branch circuit. The format is comma separated list of outlets; e.g. 8,9,10,11,12 | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUCL | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.15 | INTEGER (-1000..100000) | RW | ||||||||||||||
column · INTEGER (-1000..100000) · read-write · current Circuit Current UCL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUWL | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.16 | INTEGER (-1000..100000) | RW | ||||||||||||||
column · INTEGER (-1000..100000) · read-write · current Circuit Current UWL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLWL | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.17 | INTEGER (-1000..100000) | RW | ||||||||||||||
column · INTEGER (-1000..100000) · read-write · current Circuit Current LWL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLCL | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.18 | INTEGER (-1000..100000) | RW | ||||||||||||||
column · INTEGER (-1000..100000) · read-write · current Circuit Current LCL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.19 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduP2BrCktCircuitCurrentUCL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.20 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduP2BrCktCircuitCurrentUWL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLWLTrapEn | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.21 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduP2BrCktCircuitCurrentLWL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLCLTrapEn | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.22 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pduP2BrCktCircuitCurrentLCL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.23 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduP2BrCktCircuitCurrentUCL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentUWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.24 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduP2BrCktCircuitCurrentUWL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLWLTrapPer | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.25 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduP2BrCktCircuitCurrentLWL. | |||||||||||||||||
| CpduP2BrCktCircuitCurrentLCLTrapPer | 1.3.6.1.4.1.3711.24.1.1.11.1.1.1.26 | Unsigned32 (0..65535) | RW | ||||||||||||||
column · Unsigned32 (0..65535) · read-write · current Trap repetition period for pduP2BrCktCircuitCurrentLCL. | |||||||||||||||||
| NplatformData | 1.3.6.1.4.1.3711.24.1.1.98 | ||||||||||||||||
| SplatHwType | 1.3.6.1.4.1.3711.24.1.1.98.1 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Hardware type. | |||||||||||||||||
| SplatFwRev | 1.3.6.1.4.1.3711.24.1.1.98.2 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Firmware revision number. | |||||||||||||||||
| SplatBootldrRev | 1.3.6.1.4.1.3711.24.1.1.98.3 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Bootloader revision number. | |||||||||||||||||
| SplatModelName | 1.3.6.1.4.1.3711.24.1.1.98.4 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Model name. | |||||||||||||||||
| Ninventory | 1.3.6.1.4.1.3711.24.1.1.99 | ||||||||||||||||
| SinvProdSignature | 1.3.6.1.4.1.3711.24.1.1.99.1 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Product data signature. | |||||||||||||||||
| SinvProdFormatVer | 1.3.6.1.4.1.3711.24.1.1.99.2 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Product data format version. | |||||||||||||||||
| SinvManufCode | 1.3.6.1.4.1.3711.24.1.1.99.3 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Manufacturer code. | |||||||||||||||||
| SinvOrderNum | 1.3.6.1.4.1.3711.24.1.1.99.4 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Order number. | |||||||||||||||||
| SinvBatchNum | 1.3.6.1.4.1.3711.24.1.1.99.5 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Batch number. | |||||||||||||||||
| SinvProdTestTime | 1.3.6.1.4.1.3711.24.1.1.99.6 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Data and time of production test. | |||||||||||||||||
| SinvUnitName | 1.3.6.1.4.1.3711.24.1.1.99.7 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Unit name. | |||||||||||||||||
| SinvUnitPartNum | 1.3.6.1.4.1.3711.24.1.1.99.8 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Unit part number. | |||||||||||||||||
| SinvHwRevision | 1.3.6.1.4.1.3711.24.1.1.99.9 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Hardware revision number. | |||||||||||||||||
| SinvFwRevision | 1.3.6.1.4.1.3711.24.1.1.99.10 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Firmware revision number. | |||||||||||||||||
| SinvSerialNum | 1.3.6.1.4.1.3711.24.1.1.99.11 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Serial number. | |||||||||||||||||
| SinvDefaultIPAddrType | 1.3.6.1.4.1.3711.24.1.1.99.12 | IpStackConfiguration | RO | ||||||||||||||
scalar · IpStackConfiguration · read-only · current The configuration of the network stack. | |||||||||||||||||
| SinvDefaultIPAddr | 1.3.6.1.4.1.3711.24.1.1.99.13 | InetAddress | RO | ||||||||||||||
scalar · InetAddress · read-only · current Default unit IP address. | |||||||||||||||||
| SinvDefaultSubNetMask | 1.3.6.1.4.1.3711.24.1.1.99.14 | InetAddress | RO | ||||||||||||||
scalar · InetAddress · read-only · current Default unit sub-network mask. | |||||||||||||||||
| SinvDefaultGWAddr | 1.3.6.1.4.1.3711.24.1.1.99.15 | InetAddress | RO | ||||||||||||||
scalar · InetAddress · read-only · current Default unit default gateway address. | |||||||||||||||||
| SinvMacAddr | 1.3.6.1.4.1.3711.24.1.1.99.16 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current Unit medium access control (MAC) address. | |||||||||||||||||
| SinvOk | 1.3.6.1.4.1.3711.24.1.1.99.20 | TruthValue | RO | ||||||||||||||
scalar · TruthValue · read-only · current Confirms that the inventory record isn't corrupted. | |||||||||||||||||
| SinvInputCount | 1.3.6.1.4.1.3711.24.1.1.99.50 | INTEGER (0..24) | RO | ||||||||||||||
scalar · INTEGER (0..24) · read-only · current The maximum number of inputs that can be connected to the unit | |||||||||||||||||
| SinvOutputCount | 1.3.6.1.4.1.3711.24.1.1.99.51 | INTEGER (0..24) | RO | ||||||||||||||
scalar · INTEGER (0..24) · read-only · current The maximum number of outputs that can be connected to the unit | |||||||||||||||||
| SinvKeypadCount | 1.3.6.1.4.1.3711.24.1.1.99.52 | INTEGER (0..2) | RO | ||||||||||||||
scalar · INTEGER (0..2) · read-only · current The maximum number of keypads that can be connected to the unit | |||||||||||||||||
| SinvAcuCount | 1.3.6.1.4.1.3711.24.1.1.99.53 | INTEGER (0..6) | RO | ||||||||||||||
scalar · INTEGER (0..6) · read-only · current The maximum number of ACU's that can be connected to the unit | |||||||||||||||||
| SinvAccessUserCount | 1.3.6.1.4.1.3711.24.1.1.99.54 | INTEGER (0..20) | RO | ||||||||||||||
scalar · INTEGER (0..20) · read-only · current The maximum number of user entries on the unit | |||||||||||||||||
| SinvPduCount | 1.3.6.1.4.1.3711.24.1.1.99.55 | INTEGER (0..6) | RO | ||||||||||||||
scalar · INTEGER (0..6) · read-only · current The maximum number of PDU's that can be connected to the unit | |||||||||||||||||
| NtrapInfo | 1.3.6.1.4.1.3711.24.1.1.100 | ||||||||||||||||
| StrapCode | 1.3.6.1.4.1.3711.24.1.1.100.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current A decimal number to be carried on notifications of types 1 to 4 identifying the event which caused it. The format of this number is BBEEffCCT where BB is the number of the relevant MIB branch. EE indicates what type of event caused the notification. This value is dependent upon branch number and implementation. CC is the channel number which was the source of the notification. T discriminates the type of data, e.g. temperature. This value is dependent upon branch number and implementation. ff future use. Fields are packed with leading zeros and are set to zero if not relevant to a particular notification. | |||||||||||||||||
| StrapDescription | 1.3.6.1.4.1.3711.24.1.1.100.2 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current A string to be carried on notifications of types 1 to 4 identifying the event which caused it. The format of this string is as follows. Field 1 - type of notification, e.g. warning, critical, etc. Field 2 - data source, e.g. inputs. Generally this relates to a particular MIB branch. Field 3 - channel number, e.g. input 1. Field 4 - event, i.e. what caused the trap. Field 5 - value at which the event occured, e.g. 900, indicating 90% humidity. Field 6 - type of data, e.g. relative humidity Fields are omitted if not relevant to a particular notification. | |||||||||||||||||
| Ntraps | 1.3.6.1.4.1.3711.24.1.2 | ||||||||||||||||
| !alarmCritical | 1.3.6.1.4.1.3711.24.1.2.1 | ||||||||||||||||
| !alarmWarning | 1.3.6.1.4.1.3711.24.1.2.2 | ||||||||||||||||
| !alarmInformation | 1.3.6.1.4.1.3711.24.1.2.3 | ||||||||||||||||
| !alarmCleared | 1.3.6.1.4.1.3711.24.1.2.4 | ||||||||||||||||
| Nv2 | 1.3.6.1.4.1.3711.24.2 | ||||||||||||||||
| Nobjects2 | 1.3.6.1.4.1.3711.24.2.1 | ||||||||||||||||
| Npdus2 | 1.3.6.1.4.1.3711.24.2.1.1 | ||||||||||||||||
| Npdu2Common | 1.3.6.1.4.1.3711.24.2.1.1.1 | ||||||||||||||||
| Tpdu2Table | 1.3.6.1.4.1.3711.24.2.1.1.1.1 | NA | |||||||||||||||
table · not-accessible · current A table giving data for all PDUs. | |||||||||||||||||
| Rpdu2Entry | 1.3.6.1.4.1.3711.24.2.1.1.1.1.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about all PDUs.
| |||||||||||||||||
| Cpdu2PduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.1.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2RS | 1.3.6.1.4.1.3711.24.2.1.1.1.1.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The PDU table row status. | |||||||||||||||||
| Cpdu2WiringTopology | 1.3.6.1.4.1.3711.24.2.1.1.1.1.1.3 | WiringTopologyType | RO | ||||||||||||||
column · WiringTopologyType · read-only · current The PDU wiring topology description. | |||||||||||||||||
| Cpdu2PhaseTopology | 1.3.6.1.4.1.3711.24.2.1.1.1.1.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The PDU phase topology description. | |||||||||||||||||
| Tpdu2CustDataTable | 1.3.6.1.4.1.3711.24.2.1.1.1.2 | NA | |||||||||||||||
table · not-accessible · current A table giving customer entered metadata for all PDUs | |||||||||||||||||
| Rpdu2CustDataEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about customer metadata. | |||||||||||||||||
| Cpdu2CustDataPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2CustDataRS | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The customer metadata table row status. | |||||||||||||||||
| Cpdu2CustDataMainCktRefOverall | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.3 | CktRefName | RW | ||||||||||||||
column · CktRefName · read-write · current Overall reference string | |||||||||||||||||
| Cpdu2CustDataMainCktRefCktA | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.4 | CktRefName | RW | ||||||||||||||
column · CktRefName · read-write · current Circuit-A reference string | |||||||||||||||||
| Cpdu2CustDataMainCktRefCktB | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.5 | CktRefName | RW | ||||||||||||||
column · CktRefName · read-write · current Circuit-B reference string | |||||||||||||||||
| Cpdu2CustDataMainCktRefCktC | 1.3.6.1.4.1.3711.24.2.1.1.1.2.1.6 | CktRefName | RW | ||||||||||||||
column · CktRefName · read-write · current Circuit-C reference string | |||||||||||||||||
| Tpdu2InputAggregateTable | 1.3.6.1.4.1.3711.24.2.1.1.1.3 | NA | |||||||||||||||
table · not-accessible · current A table giving input aggregation information for all PDUs. | |||||||||||||||||
| Rpdu2InputAggregateEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about input aggregation.
| |||||||||||||||||
| Cpdu2IpAggPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2IpAggRS | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.2 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The input aggregate table row status. | |||||||||||||||||
| Cpdu2IpAggAggregatekWh | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.3 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate kWh. The value precision is hundredths e.g. a value of 101 is 1.01 kWh. | |||||||||||||||||
| Cpdu2IpAggAggregatekVA | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.4 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate kVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2IpAggAggregatekW | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.5 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate kW. The value precision is hundredths e.g. a value of 101 is 1.01 kW. | |||||||||||||||||
| Cpdu2IpAggAggregatePF | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate PF. The value precision is thousandths e.g. a value of 1001 is 1.001 PF. | |||||||||||||||||
| Cpdu2IpAggAggregateCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2IpAggAggregateNeutralCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.8 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate Neutral Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2IpAggAggregateEarthCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.3.1.9 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Aggregate Earth Current. The value precision is thousandths e.g. a value of 101 is 1.001 Amps. | |||||||||||||||||
| Tpdu2PhaseMonitorTable | 1.3.6.1.4.1.3711.24.2.1.1.1.4 | NA | |||||||||||||||
table · not-accessible · current A table giving phase monitoring information data for all PDUs | |||||||||||||||||
| Rpdu2PhaseMonitorEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about phase monitoring. | |||||||||||||||||
| Cpdu2PhMonPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2PhMonPhaseNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU phase Number. | |||||||||||||||||
| Cpdu2PhMonRS | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The phase monitor table row status. | |||||||||||||||||
| Cpdu2PhMonLineID | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU Line ID. | |||||||||||||||||
| Cpdu2PhMonPhaseToNeutralVoltage | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.5 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase To Neutral Voltage. The value precision is tenths e.g. a value of 101 is 10.1 V. | |||||||||||||||||
| Cpdu2PhMonPhaseCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2PhMonPhasekVA | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase kVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2PhMonPhasePeakkVA | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.8 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase Peak KVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2PhMonPhasePeakkVATimestamp | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.9 | UnsignedTimeTicks | RO | ||||||||||||||
column · UnsignedTimeTicks · read-only · current The PDU Phase Peak KVA Timestamp. | |||||||||||||||||
| Cpdu2PhMonPhasekW | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.10 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase hkW. The value precision is hundredths e.g. a value of 101 is 1.01 kW. | |||||||||||||||||
| Cpdu2PhMonPhasePF | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.11 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase PF. The value precision is thousandths e.g. a value of 1001 is 1.001 PF. | |||||||||||||||||
| Cpdu2PhMonPhasekWh | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.12 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase hkWh. The value precision is hundredths e.g. a value of 101 is 1.01 kWh. | |||||||||||||||||
| Cpdu2PhMonPhasekVAr | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.13 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase kVAr. The value precision is hundredths e.g. a value of 101 is 1.01 kVAr. | |||||||||||||||||
| Cpdu2PhMonPhaseCrestFactor | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.14 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase Crest Factor. The value precision is thousandths of percent e.g. a value of 999 is 99.9%. | |||||||||||||||||
| Cpdu2PhMonPhaseTHD | 1.3.6.1.4.1.3711.24.2.1.1.1.4.1.15 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Phase THD (Total Harmonic Distortion). The value precision is thousandths of percent e.g. a value of 999 is 99.9%. | |||||||||||||||||
| Tpdu2CircuitMonitorTable | 1.3.6.1.4.1.3711.24.2.1.1.1.5 | NA | |||||||||||||||
table · not-accessible · current A table giving circuit monitoring information for all PDUs. | |||||||||||||||||
| Rpdu2CircuitMonitorEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about circuit monitoring. | |||||||||||||||||
| Cpdu2CktMonPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2CktMonCircuitNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit Number. | |||||||||||||||||
| Cpdu2CktMonRS | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The circuit monitor table row status. | |||||||||||||||||
| Cpdu2CktMonLineID | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU Line ID. | |||||||||||||||||
| Cpdu2CktMonLineToLineVoltage | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.5 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit To Neutral Voltage. The value precision is tenths e.g. a value of 101 is 10.1 V. | |||||||||||||||||
| Cpdu2CktMonLineToLineCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2CktMonLineToLineKVA | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit kVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2CktMonLineToLinePeakkVA | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.8 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit Peak KVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2CktMonLineToLinePeakkVATimestamp | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.9 | UnsignedTimeTicks | RO | ||||||||||||||
column · UnsignedTimeTicks · read-only · current The PDU Circuit Peak hKVA Timestamp. | |||||||||||||||||
| Cpdu2CktMonLineToLinekW | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.10 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit hkW. The value precision is hundredths e.g. a value of 101 is 1.01 kW. | |||||||||||||||||
| Cpdu2CktMonLineToLinePF | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.11 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit PF. The value precision is thousandths e.g. a value of 1001 is 1.001 PF. | |||||||||||||||||
| Cpdu2CktMonLineToLinekVAr | 1.3.6.1.4.1.3711.24.2.1.1.1.5.1.12 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Circuit kVAr. The value precision is hundredths e.g. a value of 101 is 1.01 kVAr. | |||||||||||||||||
| Tpdu2BranchCircuitMonitorTable | 1.3.6.1.4.1.3711.24.2.1.1.1.6 | NA | |||||||||||||||
table · not-accessible · current A table giving branch circuit monitoring information for all PDUs. | |||||||||||||||||
| Rpdu2BranchCircuitMonitorEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about branch circuit monitoring. | |||||||||||||||||
| Cpdu2BrCktMonPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Number. | |||||||||||||||||
| Cpdu2BrCktMonRS | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The branch circuit monitor table row status. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitID | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU Branch Circuit ID. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitPhases | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.5 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU Branch Circuit Phases. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitPeakCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Peak Current. The value precision is hundredths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitPeakCurrentTimestamp | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.8 | UnsignedTimeTicks | RO | ||||||||||||||
column · UnsignedTimeTicks · read-only · current The PDU Branch Circuit Peak Current Timestamp. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitBreakerStatus | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.9 | BranchCircuitStatusType | RO | ||||||||||||||
column · BranchCircuitStatusType · read-only · current The PDU Branch Circuit Breaker Status. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitBreakerConfig | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.10 | BranchCircuitConfigType | RW | ||||||||||||||
column · BranchCircuitConfigType · read-write · current The PDU Branch Circuit Breaker Config. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitBreakerTripState | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.11 | BranchCircuitStatusType | RO | ||||||||||||||
column · BranchCircuitStatusType · read-only · current The PDU Branch Circuit Breaker Trip State. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitBreakerContinuousLoadRatingAmps | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.12 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Breaker Continuous Load Rating Amps. | |||||||||||||||||
| Cpdu2BrCktMonBranchCircuitBreakerTripRatingAmps | 1.3.6.1.4.1.3711.24.2.1.1.1.6.1.13 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU Branch Circuit Breaker Trip Rating Amps. | |||||||||||||||||
| Tpdu2OutletMonitorTable | 1.3.6.1.4.1.3711.24.2.1.1.1.7 | NA | |||||||||||||||
table · not-accessible · current A table giving outlet monitoring information for all PDUs. | |||||||||||||||||
| Rpdu2OutletMonitorEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about outlet monitoring. | |||||||||||||||||
| Cpdu2OutMonPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2OutMonOutletNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet number. | |||||||||||||||||
| Cpdu2OutMonRS | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The outlet monitor table row status. | |||||||||||||||||
| Cpdu2OutMonOutletID | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU outlet ID. | |||||||||||||||||
| Cpdu2OutMonOutletVoltage | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.5 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet voltage. The value precision is tenths e.g. a value of 101 is 1.01 V. | |||||||||||||||||
| Cpdu2OutMonOutletCurrent | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.6 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet current. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2OutMonOutletkVA | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet kVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2OutMonOutletPeakkVA | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.8 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet peak kVA. The value precision is hundredths e.g. a value of 101 is 1.01 kVA. | |||||||||||||||||
| Cpdu2OutMonOutletPeakkVATimestamp | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.9 | UnsignedTimeTicks | RO | ||||||||||||||
column · UnsignedTimeTicks · read-only · current The PDU outlet peak kVA timestamp. | |||||||||||||||||
| Cpdu2OutMonOutletkW | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.10 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet hkW. The value precision is hundredths e.g. a value of 101 is 1.01 kW. | |||||||||||||||||
| Cpdu2OutMonOutletPF | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.11 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet PF. The value precision is thousandths e.g. a value of 1001 is 1.001 PF. | |||||||||||||||||
| Cpdu2OutMonOutletkWh | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.12 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet kWh. The value precision is hundredths e.g. a value of 101 is 1.01 kWh. | |||||||||||||||||
| Cpdu2OutMonOutletBranchCircuitID | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.13 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU outlet circuit ID. | |||||||||||||||||
| Cpdu2OutMonOutletPhaseID | 1.3.6.1.4.1.3711.24.2.1.1.1.7.1.14 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU outlet phase ID. | |||||||||||||||||
| Tpdu2OutletControlTable | 1.3.6.1.4.1.3711.24.2.1.1.1.8 | NA | |||||||||||||||
table · not-accessible · current A table giving outlet control information for all PDUs. | |||||||||||||||||
| Rpdu2OutletControlEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing information about outlet control. | |||||||||||||||||
| Cpdu2OutCtlPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU index number. | |||||||||||||||||
| Cpdu2OutCtlOutletNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU outlet number. | |||||||||||||||||
| Cpdu2OutCtlRS | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The outlet control table row status. | |||||||||||||||||
| Cpdu2OutCtlControlledOutletID | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The PDU controlled outlet ID. | |||||||||||||||||
| Cpdu2OutCtlControlledOutletState | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.5 | ControlledOutletStatusType | RO | ||||||||||||||
column · ControlledOutletStatusType · read-only · current The PDU controlled outlet state. | |||||||||||||||||
| Cpdu2OutCtlControlledOutletPowerUpState | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.6 | ControlledOutletStatusType | RO | ||||||||||||||
column · ControlledOutletStatusType · read-only · current The PDU controlled outlet power up state. | |||||||||||||||||
| Cpdu2OutCtlControlledOutletPowerUpTimeDelay | 1.3.6.1.4.1.3711.24.2.1.1.1.8.1.7 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The PDU controlled outlet power up time delay. | |||||||||||||||||
| Tpdu2BranchCircuitThreshTable | 1.3.6.1.4.1.3711.24.2.1.1.1.9 | NA | |||||||||||||||
table · not-accessible · current A table listing the alarm threshold information for each branch circuit. | |||||||||||||||||
| Rpdu2BranchCircuitThreshEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing alarm threshold information about one branch circuit. | |||||||||||||||||
| Cpdu2BrCktThreshPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The number of the PDU on which the branch circuit resides. | |||||||||||||||||
| Cpdu2BrCktThreshBranchCircuitNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The branch circuit number. | |||||||||||||||||
| Cpdu2BrCktThreshRS | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The table row status. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUCL | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.4 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Branch Circuit Current UCL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUWL | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.5 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Branch Circuit Current UWL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLWL | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.6 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Branch Circuit Current LWL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLCL | 1.3.6.1.4.1.3711.24.2.1.1.1.9.1.7 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Branch Circuit Current LCL. The value precision is thousandths e.g. a value of 1001 is 1.001 Amps. | |||||||||||||||||
| Tpdu2BranchCircuitTrapEnTable | 1.3.6.1.4.1.3711.24.2.1.1.1.10 | NA | |||||||||||||||
table · not-accessible · current A table listing the trap enabling information for each branch circuit. | |||||||||||||||||
| Rpdu2BranchCircuitTrapEnEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing trap enabling information about one branch circuit. | |||||||||||||||||
| Cpdu2BrCktTrapEnPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The number of the PDU on which the branch circuit resides. | |||||||||||||||||
| Cpdu2BrCktTrapEnBranchCircuitNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The branch circuit number. | |||||||||||||||||
| Cpdu2BrCktTrapEnRS | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The table row status. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUCLTrapEn | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.4 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pdu2BrCktBranchCircuitCurrentUCL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUWLTrapEn | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.5 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pdu2BrCktBranchCircuitCurrentUWL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLWLTrapEn | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.6 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pdu2BrCktBranchCircuitCurrentLWL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLCLTrapEn | 1.3.6.1.4.1.3711.24.2.1.1.1.10.1.7 | TruthValue | RW | ||||||||||||||
column · TruthValue · read-write · current Trap enable flag for pdu2BrCktBranchCircuitCurrentLCL. | |||||||||||||||||
| Tpdu2BranchCircuitTrapPerTable | 1.3.6.1.4.1.3711.24.2.1.1.1.11 | NA | |||||||||||||||
table · not-accessible · current A table listing the trap repetition periods for each branch circuit on the PDUs. | |||||||||||||||||
| Rpdu2BranchCircuitTrapPerEntry | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1 | NA | |||||||||||||||
row · not-accessible · current A conceptual row containing trap repetition periods for one branch circuit. | |||||||||||||||||
| Cpdu2BrCktTrapPerPduNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.1 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The number of the PDU on which the branch circuit resides. | |||||||||||||||||
| Cpdu2BrCktTrapPerBranchCircuitNumber | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.2 | Unsigned32 | RO | ||||||||||||||
column · Unsigned32 · read-only · current The outlet number. | |||||||||||||||||
| Cpdu2BrCktTrapPerRS | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.3 | RowStatus | RO | ||||||||||||||
column · RowStatus · read-only · current The table row status. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUCLTrapPer | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.4 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Trap repetition period for pdu2BrCktBranchCircuitCurrentUCL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentUWLTrapPer | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.5 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Trap repetition period for pdu2BrCktBranchCircuitCurrentUWL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLWLTrapPer | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.6 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Trap repetition period for pdu2BrCktBranchCircuitCurrentLWL. | |||||||||||||||||
| Cpdu2BrCktBranchCircuitCurrentLCLTrapPer | 1.3.6.1.4.1.3711.24.2.1.1.1.11.1.7 | Unsigned32 | RW | ||||||||||||||
column · Unsigned32 · read-write · current Trap repetition period for pdu2BrCktBranchCircuitCurrentLCL. | |||||||||||||||||
| Ntraps2 | 1.3.6.1.4.1.3711.24.2.2 | ||||||||||||||||
Textual conventions
BranchCircuitConfigTypeINTEGERcloseOn(1)invalidFeature(255)openOff(2)Represents the configuration of the branch circuit.
BranchCircuitStatusTypeINTEGERcloseOn(1)invalidFeature(255)openOff(2)Represents the status of the branch circuit.
CktRefNameOCTET STRING (SIZE (0..31))Denotes a Main Circuit Reference Identifier.
ContactStateINTEGERclosed(2)open(1)Represents the state of a set of contacts.
ControlledOutletStatusTypeINTEGERlastKnownState(3)off(2)on(1)timeDelayOn(4)Represents the status of the controlled outlet.
EnableStateINTEGERdisabled(2)enabled(1)Represents the state of an enabling flag.
ExternalUnitTypeINTEGERacu(1)auto(254)autoWithTraps(253)enviroHawk2(4)idm(5)inactive(255)keypad(2)pduEU(3)unknown(0)Represents the type of external unit.
InetAddressOCTET STRING (SIZE (0..255))Denotes a generic Internet address. (Copied from INET-ADDRESS-MIB.)
InetAddressTypeINTEGERdns(16)ipv4(1)ipv4z(3)ipv6(2)ipv6z(4)unknown(0)A value that represents a type of Internet address. (Copied from INET-ADDRESS-MIB.)
InputContactStateINTEGERarmed(3)closed(2)open(1)triggered(4)unknown(255)Represents the state of a set of input contacts.
InputDataTypeINTEGERanalogue(4)autodetect(1)contact(5)humidity(3)inactive(255)temperature(2)Represents the type of data read at an input.
IpStackConfigurationINTEGERipv4AndIpv6(3)ipv4Only(1)ipv6Only(2)unknown(0)A value that represents the network stack configuration
KeypadEnableStateINTEGERinactive(255)matrix2x5(1)matrix3x4(2)Represents the type of keypad enabled.
OutputControlStateINTEGERactivate(1)deactivate(2)logic(3)Represents the control setiing for an output.
RelayStateINTEGERoff(2)on(1)Represents the energised state of a relay.
UnsignedTimeTicksUnsigned32Date/Time in 1/100th seconds since Jan 1, 1970 00:00 UTC to avoid timezone issues. Will wrap around in 2106. If converted to Signed32, wraps around 2038-01-19 3:14AM UTC.
WiringTopologyTypeINTEGERdeltaWithNeutral(6)disabled(1)none(254)singlePhase(2)threePhaseDelta(5)threePhaseStar(4)twoPhase(3)unknown(255)Represents the connectivity topology inside the device.
Traps / Notifications
- alarmCleared
1.3.6.1.4.1.3711.24.1.2.4 - alarmCritical
1.3.6.1.4.1.3711.24.1.2.1 - alarmInformation
1.3.6.1.4.1.3711.24.1.2.3 - alarmWarning
1.3.6.1.4.1.3711.24.1.2.2