snmptranslate -m ULAF2-MIB -Tpsnmpwalk -v2c -c <community> -m ULAF2-MIB <host> 1.3.6.1.4.1.1887Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NsiemensCH | 1.3.6.1.4.1.1887 | ||||||||||||||||
| Nlineintegrator | 1.3.6.1.4.1.1887.1 | ||||||||||||||||
| Nulaf2 | 1.3.6.1.4.1.1887.1.1 | ||||||||||||||||
| NproxyAgent | 1.3.6.1.4.1.1887.1.1.1 | ||||||||||||||||
| NproxyAgtVers2 | 1.3.6.1.4.1.1887.1.1.1.2 | ||||||||||||||||
| NagtSystem | 1.3.6.1.4.1.1887.1.1.1.2.1 | ||||||||||||||||
| SagtSWVersion | 1.3.6.1.4.1.1887.1.1.1.2.1.1 | DisplayString (SIZE (0..255)) | RO | mandatory | OMI SNMP V4.00 | ||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory Contains software version of Proxy Subagent. Example values from LibreNMS test devices
| |||||||||||||||||
| SagtDateLastPortChange | 1.3.6.1.4.1.1887.1.1.1.2.1.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Contains time when the connected device or the type of link of a device equipment has changed.(Link Up and Down traps). | |||||||||||||||||
| SagtProxyFeatureFlag | 1.3.6.1.4.1.1887.1.1.1.2.1.3 | OCTET STRING (SIZE (33)) | RO | mandatory | |||||||||||||
scalar · OCTET STRING (SIZE (33)) · read-only · mandatory Contains a map of features supported by the local device. Byte 0-31 contain the bit-coded feature flags 0..255 Byte 32 contains information about the validity of the previous 32 bytes. 1 Ok The information in bytes 0..31 is valid 254 unknown values 255 unsupported variable for addressed device | |||||||||||||||||
| SagtProxyAciSupported | 1.3.6.1.4.1.1887.1.1.1.2.1.4 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Identifies this device as Ulaf+ OMI SNMP towards Access Integrator. Always returns 'FullAciSupport' | |||||||||||||||||
| NagtSerialPort | 1.3.6.1.4.1.1887.1.1.1.2.2 | ||||||||||||||||
| SagtPortNumber | 1.3.6.1.4.1.1887.1.1.1.2.2.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This object contains the number of available serial ports | |||||||||||||||||
| TagtPortTable | 1.3.6.1.4.1.1887.1.1.1.2.2.2 | NA | mandatory | ||||||||||||||
| RagtPortEntry | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||
| CagtPortIndex | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object corresponds to the port number. Ports are enumarated beginning with one. | |||||||||||||||||
| CagtPortName | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.2 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory Contains name of device file | |||||||||||||||||
| CagtPortConnected | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory This object tells the agent, if the appropriate serial port is used or not.
| |||||||||||||||||
| CagtConnectedDevice | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.4 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory This object contains the name of the connected device (e.g OMIBG). | |||||||||||||||||
| CagtPortType | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object describes if the port is a local RS232 serial port, a locally installed serial port card or the port is a remote port of a port server
| |||||||||||||||||
| CagtPortTypeNumber | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object contains the number of the serial port of the appropriate port type defined in agtPortType. | |||||||||||||||||
| CagtPortServerName | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.7 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory This object contains a name to identify the port server | |||||||||||||||||
| CagtPortState | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This variable shows in which reconnection state a port is. The first two states refer to local serial ports or to PortServer ports using the Digi RealPort drivers, the last three states refer to PortServer ports using the proprietory method of LineIntegrator. 1 UnopenedSerial Serial port, not opened 2 OpenedSerial Serial port, opened 3 ConnectingRemote Remote port, waiting for connection 4 OpenedRemote Remote port, opened 5 FailedRemote Remote port, connection failed 6 Disabled Port is disabled 7 Invalid Port entry is invalid (configuration file problem) 254 Unknown Unknown value
| |||||||||||||||||
| CagtPortDeviceFamily | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.9 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This variable shows which device family will be tried during the auto-discovery phase. 1 Ulaf2 Ulaf-2 Devices (OMI, NAG) will be discovered 2 UlafPlus Ulaf+ Devices (OMI, XTU) will be discovered 3 Ulaf2AndPlus Ulaf-2 and Ulaf+ devices will be discovered 254 Unknown Unknown value
| |||||||||||||||||
| CagtPortTryingDevice | 1.3.6.1.4.1.1887.1.1.1.2.2.2.1.10 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This variable shows which device is currently being tried on the port. If no answer is received during 5 seconds, the next device will be tried 1 Disabled The port has been disabled, no device will be tried 2 Invalid The port is invalid, no device will be tried 3 None No device is being tried at the moment 4 Omi Trying Ulaf-2 OMI 5 Nag Trying Ulaf-2 NAG Desktop 6 OmiPlus Trying Ulaf+ OMI 7 DesktopPlus Trying Ulaf+ Desktop 254 Unknown Unknown value
| |||||||||||||||||
| NagtAlarmCountGroup | 1.3.6.1.4.1.1887.1.1.1.2.3 | ||||||||||||||||
| SagtAlarmCount | 1.3.6.1.4.1.1887.1.1.1.2.3.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This object counts the number of Alarm traps sent by this proxy since the last time the variable has been read. | |||||||||||||||||
| SagtPortServerReset | 1.3.6.1.4.1.1887.1.1.1.2.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This variable cannot be read (it returns unknown if read) If reset(1) is written to it, the proxy tries to reset all DigiInternational PortServers. It does not reset any other manufacturer's port servers. This step can be necessary, if a router between the proxy and a PortServer has crashed and the PortServer keeps open a stale connection to which the proxy can no longer connect. Do not use this feature manually but use the option in the LineIntegrator Menu in HP OpenView NNM.
| |||||||||||||||||
| Ndevice | 1.3.6.1.4.1.1887.1.1.3 | ||||||||||||||||
| NdeviceVers2 | 1.3.6.1.4.1.1887.1.1.3.2 | ||||||||||||||||
| NdeviceSystem | 1.3.6.1.4.1.1887.1.1.3.2.1 | ||||||||||||||||
| TdeviceSystemTable | 1.3.6.1.4.1.1887.1.1.3.2.1.1 | NA | mandatory | ||||||||||||||
| RdeviceSystemEntry | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||
| CdeviceSystemPortIndex | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object addresses the port of the proxy agent. | |||||||||||||||||
| CdeviceLinkNumber | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object contains the maximum number of supported line cards | |||||||||||||||||
| CdeviceSWVersion | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.3 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory Contains software version of device. | |||||||||||||||||
| CdeviceExtAlarm | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object contains the external alarm of the OMI equipment.
| |||||||||||||||||
| CdeviceDateLastLinkChange | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object contains the absolute date and time when the type of link has changed its configuration. (e.g. removing a line card). (Link Up and Link Down Traps) | |||||||||||||||||
| CdeviceOmiFeatureFlag | 1.3.6.1.4.1.1887.1.1.3.2.1.1.1.6 | OCTET STRING (SIZE (33)) | RO | mandatory | |||||||||||||
column · OCTET STRING (SIZE (33)) · read-only · mandatory Contains a map of features supported by the local device. Byte 0-31 contain the bit-coded feature flags 0..255 Byte 32 contains information about the validity of the previous 32 bytes. 1 Ok The information in bytes 0..31 is valid 254 unknown values 255 unsupported variable for addressed device | |||||||||||||||||
| NdeviceLinks | 1.3.6.1.4.1.1887.1.1.3.2.2 | ||||||||||||||||
| TdeviceLinkTable | 1.3.6.1.4.1.1887.1.1.3.2.2.1 | NA | mandatory | ||||||||||||||
| RdeviceLinkEntry | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||
| CdevicePortIndex | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.1 | INTEGER | RO | mandatory | 1 | ||||||||||||
column · INTEGER · read-only · mandatory This object addresses the port of the proxy agent. Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkIndex | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.2 | INTEGER | RO | mandatory | 0 | ||||||||||||
| CdeviceLinkName | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.3 | DisplayString (SIZE (0..255)) | RO | mandatory | OMI | ||||||||||||
| CdeviceLinkAlarm | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.4 | INTEGER | RO | mandatory | 0 | ||||||||||||
column · INTEGER · read-only · mandatory This object contains the collected alarms
It is used to convert alarm notifications
to SNMP traps.
Bits 0,1 and 2 are used for the Alarm Summary
Bit 5 is used to signify a loop state change of Ulaf-2 Desktop devices
Bit Alarm Description
0 UA Urgent alarm
1 NUA Non urgent alarm
2 AIS Alarm indication signal
3 unused
4 unused
5 loopback change (Ulaf-2) | |||||||||||||||||
| CdeviceLinkLocalLtNt | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.5 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates whether the management system is connected to an LT or an NT device. 1 LT Device is configured as LT 2 NT Device is configured as NT (NT local) 254 unknown value 255 unsupported variable for addressed device
Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalId | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.6 | DisplayString | RO | mandatory | 341 | ||||||||||||
| CdeviceLinkFarId | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.7 | DisplayString | RO | mandatory | unsupported | ||||||||||||
column · DisplayString · read-only · mandatory Contains the Firmware ID of the far device. Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkNumReg1 | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.8 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates how many regenerators were detected in HDSL path 1. 1 None No regenerator found 2 One One regenerator found (section A or 1) 3 Two Two regenerators found (section B or 2) 4 Three Three regenerators found (section 3) 5 Four Four regenerators found (section 4) 6 Five Five regenerators found (section 5) 7 Six Six regenerators found (section 6) 8 Seven Seven regenerators found (section 7) 9 Eight Eight regenerators found (section 8) 254 unknown value 255 unsupported value
Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkNumReg2 | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.9 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates how many regenerators were detected in HDSL path 1. 1 None No regenerator found 2 One One regenerator found (section A or 1) 3 Two Two regenerators found (section B or 2) 4 Three Three regenerators found (section 3) 5 Four Four regenerators found (section 4) 6 Five Five regenerators found (section 5) 7 Six Six regenerators found (section 6) 8 Seven Seven regenerators found (section 7) 9 Eight Eight regenerators found (section 8) 254 unknown value 255 unsupported value
Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalModules | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.10 | INTEGER | RO | mandatory | 128 | ||||||||||||
column · INTEGER · read-only · mandatory Gives a short summary of which modules are installed in the local device. This variable is bit coded as follows: Bit 0 G.703 Interface installed Bit 1 Data Interface installed Bit 2 Alarm Module installed Bit 3 Clock Module installed Bit 4 Debug Module installed Bit 5 Rps Module installed Bit 6 unknown value (ignore bits 0-5) Bit 7 unsupported value (ignore bits 0-5) Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkFarModules | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.11 | INTEGER | RO | mandatory | 128 | ||||||||||||
column · INTEGER · read-only · mandatory Gives a short summary of which modules are installed in the far device. This variable is bit coded as follows: Bit 0 G.703 Interface installed Bit 1 Data Interface installed Bit 2 Alarm Module installed Bit 3 Clock Module installed Bit 4 Debug Module installed Bit 5 Rps Module installed Bit 6 unknown value (ignore bits 0-5) Bit 7 unsupported value (ignore bits 0-5) Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalHwFabData | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.12 | DisplayString | RO | mandatory | S3118-Q300-A4 | ||||||||||||
| CdeviceLinkFarHwFabData | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.13 | DisplayString | RO | mandatory | unsupported | ||||||||||||
column · DisplayString · read-only · mandatory Contains the Mainboard fabrication data of the far device. Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalG703FabData | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.14 | DisplayString | RO | mandatory | unsupported | ||||||||||||
column · DisplayString · read-only · mandatory Contains the G703 Module fabrication data of the local device. Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalDataFabData | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.15 | DisplayString | RO | mandatory | unsupported | ||||||||||||
column · DisplayString · read-only · mandatory Contains the Data Module fabrication data of the local device. Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkLocalFeatureFlag | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.16 | OCTET STRING (SIZE (33)) | RO | mandatory | c0:60:00:00:00:00:00:00:10:00:00:00:00:00:00:00… | ||||||||||||
column · OCTET STRING (SIZE (33)) · read-only · mandatory Contains a map of features supported by the local device. Byte 0-31 contain the bit-coded feature flags 0..255 Byte 32 contains information about the validity of the previous 32 bytes. 1 Ok The information in bytes 0..31 is valid 254 unknown values 255 unsupported variable for addressed device Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkFarFeatureFlag | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.17 | OCTET STRING (SIZE (33)) | RO | mandatory | 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00… | ||||||||||||
column · OCTET STRING (SIZE (33)) · read-only · mandatory Contains a map of features supported by the local device. Byte 0-31 contain the bit-coded feature flags 0..255 Byte 32 contains information about the validity of the previous 32 bytes. 1 Ok The information in bytes 0..31 is valid 254 unknown values 255 unsupported variable for addressed device Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkFarFeatureFlagState | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.18 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates the state and validity of deviceLinkFarFeatureFlag. 1 Ok The values of farFeatureFlag is valid 2 TooEarly The variable was read before the LT could determine the farFeatureFlag values 3 Legacy The far device is an Ulaf-2 device and has no feature flag 254 unknown values 255 unsupported variable for addressed device
Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkSruFeatureFlag | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.19 | OCTET STRING (SIZE (33)) | RO | mandatory | 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00… | ||||||||||||
column · OCTET STRING (SIZE (33)) · read-only · mandatory Contains a map of features supported by the local device. Byte 0-31 contain the bit-coded feature flags 0..255 Byte 32 contains information about the validity of the previous 32 bytes. 1 Ok The information in bytes 0..31 is valid 254 unknown values 255 unsupported variable for addressed device Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkNumReg3 | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.20 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates how many regenerators were detected in xDSL path 3. 1 None No regenerator found 2 One One regenerator found (section A or 1) 3 Two Two regenerators found (section B or 2) 4 Three Three regenerators found (section 3) 5 Four Four regenerators found (section 4) 6 Five Five regenerators found (section 5) 7 Six Six regenerators found (section 6) 8 Seven Seven regenerators found (section 7) 9 Eight Eight regenerators found (section 8) 254 unknown value 255 unsupported value
Example values from LibreNMS test devices
| |||||||||||||||||
| CdeviceLinkNumReg4 | 1.3.6.1.4.1.1887.1.1.3.2.2.1.1.21 | INTEGER | RO | mandatory | unsupported(255) | ||||||||||||
column · INTEGER · read-only · mandatory Indicates how many regenerators were detected in xDSL path 4. 1 None No regenerator found 2 One One regenerator found (section A or 1) 3 Two Two regenerators found (section B or 2) 4 Three Three regenerators found (section 3) 5 Four Four regenerators found (section 4) 6 Five Five regenerators found (section 5) 7 Six Six regenerators found (section 6) 8 Seven Seven regenerators found (section 7) 9 Eight Eight regenerators found (section 8) 254 unknown value 255 unsupported value
Example values from LibreNMS test devices
| |||||||||||||||||
| Nlinks | 1.3.6.1.4.1.1887.1.1.4 | ||||||||||||||||
| NlinksVers2 | 1.3.6.1.4.1.1887.1.1.4.2 | ||||||||||||||||
| Nlink | 1.3.6.1.4.1.1887.1.1.4.2.1 | ||||||||||||||||
| TlinkConfigTable | 1.3.6.1.4.1.1887.1.1.4.2.1.1 | NA | mandatory | ||||||||||||||
| RlinkConfigEntry | 1.3.6.1.4.1.1887.1.1.4.2.1.1.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||
| ClinkConfigPortIndex | 1.3.6.1.4.1.1887.1.1.4.2.1.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object addresses the port number of the proxy agent | |||||||||||||||||
| ClinkConfigIndex | 1.3.6.1.4.1.1887.1.1.4.2.1.1.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This object addresses the line card number of the OMI equipment. | |||||||||||||||||
| Cperformance | 1.3.6.1.4.1.1887.1.1.4.2.1.1.1.4 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory This object defines if the performance management is running or not
| |||||||||||||||||