SIAE-RADIO-SYSTEM-MIB
SIAE Microelettronica S.p.A.Radio System MIB.
snmptranslate -m SIAE-RADIO-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m SIAE-RADIO-SYSTEM-MIB <host> 1.3.6.1.4.1.3373.1103.80Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| SIAE-ALARM-MIB | AlarmSeverityCode, AlarmStatus, alarmTrap |
| SIAE-EQUIP-MIB | equipIpSnmpAgentAddress |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| !radioPrxChange | 1.3.6.1.4.1.3373.1103.0.8001 | ||||||||||||||||||||
notification · current This event is generated when radioPrx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assinged name 4) radioPrx - PRX value | |||||||||||||||||||||
| !radioPtxChange | 1.3.6.1.4.1.3373.1103.0.8002 | ||||||||||||||||||||
notification · current This event is generated when radioPtx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assigned name 4) radioPtx - PTX value | |||||||||||||||||||||
| IradioSystem | 1.3.6.1.4.1.3373.1103.80 | ||||||||||||||||||||
identity Radio System MIB. | |||||||||||||||||||||
| SradioSystemMibVersion | 1.3.6.1.4.1.3373.1103.80.1 | INTEGER | RO | 10017 | |||||||||||||||||
scalar · INTEGER · read-only · current Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioTable | 1.3.6.1.4.1.3373.1103.80.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of radio interface entries. This table is useful to show the manager all the available radio interfaces on the equipment. Moreover it is a reference for Performance Monitoring (PWR and G828). | |||||||||||||||||||||
| RradioEntry | 1.3.6.1.4.1.3373.1103.80.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular radio interface.
| |||||||||||||||||||||
| CradioIndex | 1.3.6.1.4.1.3373.1103.80.2.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current A unique value, greater than zero, for each radio interface. It is recommended that values are assigned contiguously starting from 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLabel | 1.3.6.1.4.1.3373.1103.80.2.1.2 | DisplayString (SIZE (0..32)) | RO | TRX | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current A textual string containing information about the radio interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioType | 1.3.6.1.4.1.3373.1103.80.2.1.3 | INTEGER | RO | analogRadio(2) | |||||||||||||||||
column · INTEGER · read-only · current The type of interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioIfIndex | 1.3.6.1.4.1.3373.1103.80.2.1.4 | InterfaceIndexOrZero | RO | 0 | |||||||||||||||||
column · InterfaceIndexOrZero · read-only · current This object defines a greater than zero value to identify an interface in ifTable or a zero value if ifTable is not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioStorageType | 1.3.6.1.4.1.3373.1103.80.2.1.5 | StorageType | RO | 5 | |||||||||||||||||
column · StorageType · read-only · current The storage type of this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TxpicTable | 1.3.6.1.4.1.3373.1103.80.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of xpic radio interface entries. If a manager wants to make an xpic link, it should only add a particular xpic radio interface to an xpic link. | |||||||||||||||||||||
| RxpicEntry | 1.3.6.1.4.1.3373.1103.80.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular xpic radio interface.
| |||||||||||||||||||||
| CxpicIndex | 1.3.6.1.4.1.3373.1103.80.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value, greater than zero, for each xpic radio interface. It is recommended that values are assigned contiguously starting from 1. | |||||||||||||||||||||
| CxpicRadioIdx | 1.3.6.1.4.1.3373.1103.80.3.1.2 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Index of xpic radio interface, corresponding to an available xpic radio interface in radioTable. | |||||||||||||||||||||
| CxpicRowstatus | 1.3.6.1.4.1.3373.1103.80.3.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this conceptual row in xpicTable. | |||||||||||||||||||||
| TxpicChTable | 1.3.6.1.4.1.3373.1103.80.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of xpic channel entries. This table maps each xpic radio in respective xpic radio interface. | |||||||||||||||||||||
| RxpicChEntry | 1.3.6.1.4.1.3373.1103.80.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular xpic channel. It defines radio interface and polarization for a given xpic channel.
| |||||||||||||||||||||
| CxpicChPolIndex | 1.3.6.1.4.1.3373.1103.80.4.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current This object identifies the xpic radio polarization. | |||||||||||||||||||||
| CxpicChRadioIdx | 1.3.6.1.4.1.3373.1103.80.4.1.2 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Xpic radio interface, corresponding to a radio interface in radioTable, used to make up the given xpic radio interface. | |||||||||||||||||||||
| CxpicChRowstatus | 1.3.6.1.4.1.3373.1103.80.4.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this conceptual row in xpicChTable. | |||||||||||||||||||||
| SlinkAvailableIndex | 1.3.6.1.4.1.3373.1103.80.5 | Integer32 | RO | 2 | |||||||||||||||||
scalar · Integer32 · read-only · current Shows an index which is available for creation of a new link in the system. It shows the smallest available index. Any attempt to create a link with a different index results in a failure. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkTable | 1.3.6.1.4.1.3373.1103.80.6 | NA | |||||||||||||||||||
table · not-accessible · current A list of link entries. | |||||||||||||||||||||
| RlinkEntry | 1.3.6.1.4.1.3373.1103.80.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular link.
| |||||||||||||||||||||
| ClinkIndex | 1.3.6.1.4.1.3373.1103.80.6.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current A unique value, greater than zero, for each link. Manager must use the first available index, suggested by linkAvailableIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkType | 1.3.6.1.4.1.3373.1103.80.6.1.2 | INTEGER | RC | radio1p0(1) | |||||||||||||||||
column · INTEGER · read-create · current This object identifies link type. Supported link types are: single link, 1+1 Hot Standby, 1+1 Frequency Diversity, 2+0 XPIC, 2+2 XPIC Hot Standby, 2+2 XPIC Frequency Diversity, N+1, and 1+0 XPIC Horizontal/Vertical polarization.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkLabel | 1.3.6.1.4.1.3373.1103.80.6.1.3 | DisplayString (SIZE (0..32)) | RC | Link 1 | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current A textual string containing information about the link. This string should give more details about link specific parameters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkIfIndex | 1.3.6.1.4.1.3373.1103.80.6.1.4 | InterfaceIndexOrZero | RO | 0 | |||||||||||||||||
column · InterfaceIndexOrZero · read-only · current This object defines a greater than zero value to identify a link in ifTable or a zero value if ifTable is not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRowstatus | 1.3.6.1.4.1.3373.1103.80.6.1.5 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current Status of this row of linkTable. This object is used to manage the creation and deletion of conceptual rows in linkTable. To create a row in this table, a manager should set rowstatus to createAndWait(5) and choose a link type. Respective entries in linkSettingsTable, linkStatusTable and tdmSettingsTable will be created by agent.In case of protection links proper entries in linkProtectionTable will be also created. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The contents of linkSettingsTable and radioSettingsTable can be changed only if this object is notInService(2). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkChTable | 1.3.6.1.4.1.3373.1103.80.7 | NA | |||||||||||||||||||
table · not-accessible · current A list of link channel entries. | |||||||||||||||||||||
| RlinkChEntry | 1.3.6.1.4.1.3373.1103.80.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a particular link channel.
| |||||||||||||||||||||
| ClinkChIndex | 1.3.6.1.4.1.3373.1103.80.7.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Link Channel Index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkChRadioIdx | 1.3.6.1.4.1.3373.1103.80.7.1.2 | Integer32 | RC | 1 | |||||||||||||||||
column · Integer32 · read-create · current Radio channel index that corresponds to an available radio interface in radioTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkChRadioSettingsIdx | 1.3.6.1.4.1.3373.1103.80.7.1.3 | Integer32 | RC | 1 | |||||||||||||||||
column · Integer32 · read-create · current Radio Settings Index. This object is a foreign key for a corresponding radioSettingsTable entry, which is automatically created by agent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkChRowstatus | 1.3.6.1.4.1.3373.1103.80.7.1.4 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current Status of this row of linkChTable. This object is used to manage the creation and deletion of conceptual rows in linkChTable. To create a row in this table, a manager should set rowstatus to createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The content of radioSettingsTable can be changed only if this object is notInService(2). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkSettingsTable | 1.3.6.1.4.1.3373.1103.80.8 | NA | |||||||||||||||||||
table · not-accessible · current Table with link settings entries. This table contains all parameters of a radio frequency link. The content of this table can be changed by a manager if linkRowStatus is notInService(2). | |||||||||||||||||||||
| RlinkSettingsEntry | 1.3.6.1.4.1.3373.1103.80.8.1 | NA | |||||||||||||||||||
| ClinkBandwidthAndModulation | 1.3.6.1.4.1.3373.1103.80.8.1.1 | Integer32 | RC | 131083 | |||||||||||||||||
column · Integer32 · read-create · current Link Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 65536*modulation+bandwidth where bandwidth selection is: 0 = 3.5MHz 1 = 7MHz 2 = 14MHz 3 = 28MHz 4 = 56MHz 5 = 10MHz 6 = 20MHz 7 = 30MHz 8 = 40MHz 9 = 50MHz 10 = 112MHz 11 = 250MHz 12 = 500MHz 13 = 750MHz 14 = 1GHz 15 = 60MHz 16 = 80MHz 17 = 2GHz 18 = 62.5MHz 19 = 125MHz 20 = 1.5GHz and modulation is in bit-per-symbol: 1 = BPSK 2 = 4QAM 3 = 8PSK 4 = 16QAM 5 = 32QAM 6 = 64QAM 7 = 128QAM 8 = 256QAM 9 = 512QAM 10 = 1024QAM 11 = 2048QAM. 12 = 4096QAM. Examples: 250Mhz-4QAM (131083), 500Mhz-4QAM (131084), 250Mhz-16QAM (262155), 500Mhz-64QAM (393228). Note: 0 bit-per-symbol is not possible, so value 0 is used for BandwidthAndModulation unassigned. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmEngineEnable | 1.3.6.1.4.1.3373.1103.80.8.1.2 | INTEGER | RC | disable(1) | |||||||||||||||||
column · INTEGER · read-create · current This object is used to enable/disable the ACM engine
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkTxUpperProfile | 1.3.6.1.4.1.3373.1103.80.8.1.3 | INTEGER | RC | 4 | |||||||||||||||||
column · INTEGER · read-create · current The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkTxLowerProfile | 1.3.6.1.4.1.3373.1103.80.8.1.4 | INTEGER | RC | 4 | |||||||||||||||||
column · INTEGER · read-create · current The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkId | 1.3.6.1.4.1.3373.1103.80.8.1.5 | INTEGER (0..255) | RC | 0 | |||||||||||||||||
column · INTEGER (0..255) · read-create · current Link Identification (value 0..255) Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkTxPwrThresh | 1.3.6.1.4.1.3373.1103.80.8.1.6 | INTEGER (3..15) | RC | 3 | |||||||||||||||||
column · INTEGER (3..15) · read-create · current Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRxPwrThresh | 1.3.6.1.4.1.3373.1103.80.8.1.7 | INTEGER (-99..-40) | RC | -70 | |||||||||||||||||
column · INTEGER (-99..-40) · read-create · current Threshold (value -40 , -99 dBm) for RX power below wich the related alarm is set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkSynchSetupProtocolEnable | 1.3.6.1.4.1.3373.1103.80.8.1.8 | INTEGER | RC | disable(1) | |||||||||||||||||
column · INTEGER · read-create · current Synchronization Setup Protocol (SSP) control
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkProfilesSetSelection | 1.3.6.1.4.1.3373.1103.80.8.1.9 | INTEGER | RC | highThroughput(1) | |||||||||||||||||
column · INTEGER · read-create · current Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkXpicControlProcedure | 1.3.6.1.4.1.3373.1103.80.8.1.10 | INTEGER | RC | disable(1) | |||||||||||||||||
column · INTEGER · read-create · current Set by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioSettingsTable | 1.3.6.1.4.1.3373.1103.80.9 | NA | |||||||||||||||||||
table · not-accessible · current Table with radio settings entries. This table contains all parameters of a radio terminal. The content of this table can be changed only linkRowStatus is notInService(2) | |||||||||||||||||||||
| RradioSettingsEntry | 1.3.6.1.4.1.3373.1103.80.9.1 | NA | |||||||||||||||||||
| CradioSettingsIndex | 1.3.6.1.4.1.3373.1103.80.9.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Radio settings index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioSettingsRowStatus | 1.3.6.1.4.1.3373.1103.80.9.1.2 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current Status of this row. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioSettingsLabel | 1.3.6.1.4.1.3373.1103.80.9.1.3 | DisplayString (SIZE (0..32)) | RO | radio | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current A textual string containing information about the radio interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxFrequency | 1.3.6.1.4.1.3373.1103.80.9.1.4 | INTEGER | RC | 6271365 | |||||||||||||||||
column · INTEGER · read-create · current Transmitted frequency in KHz. Null value means invalid frequency. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioDuplexFrequency | 1.3.6.1.4.1.3373.1103.80.9.1.5 | INTEGER | RC | -2 | |||||||||||||||||
column · INTEGER · read-create · current Value of duplex frequency in KHz. -2 means not set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxAttenuation | 1.3.6.1.4.1.3373.1103.80.9.1.6 | INTEGER | RC | 20 | |||||||||||||||||
column · INTEGER · read-create · current Transmitter attenuation relative to nominal power (dBm). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioAtpcManual | 1.3.6.1.4.1.3373.1103.80.9.1.7 | INTEGER | RC | disable(1) | |||||||||||||||||
column · INTEGER · read-create · current Enables/disables Atpc Manual operation. When the feature is enabled there are 2 behaviour: - (enable) after an air los the ODU transmits the maximum available power - (enable-min-power) after an air los the ODU transmits the minimum available power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioAtpcPwrHigh | 1.3.6.1.4.1.3373.1103.80.9.1.8 | Integer32 | RC | -40 | |||||||||||||||||
column · Integer32 · read-create · current ATPC Control - Local Rx Power High (dBm range -30 to -80) -. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioAtpcPwrLow | 1.3.6.1.4.1.3373.1103.80.9.1.9 | Integer32 | RC | -60 | |||||||||||||||||
column · Integer32 · read-create · current ATPC Control - Local Rx Power Low (dBm range -30 to -80) -. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioAtpcRange | 1.3.6.1.4.1.3373.1103.80.9.1.10 | Integer32 | RC | 0 | |||||||||||||||||
column · Integer32 · read-create · current Defines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the range. A null value means no limit: the lower limit of the range is equal to minimum Ptx. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioFreqTableSelection | 1.3.6.1.4.1.3373.1103.80.9.1.11 | ChannelSpacing | RC | 0 | |||||||||||||||||
column · ChannelSpacing · read-create · current RadioFrequencyTable key (channel spacing & modulation) selection. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TtdmSettingsTable | 1.3.6.1.4.1.3373.1103.80.10 | NA | |||||||||||||||||||
table · not-accessible · current Table with tdm settings entries. | |||||||||||||||||||||
| RtdmSettingsEntry | 1.3.6.1.4.1.3373.1103.80.10.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing tdm parameters for a particular link.
| |||||||||||||||||||||
| CtdmPolIndex | 1.3.6.1.4.1.3373.1103.80.10.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Polarization index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtdmE1Channel | 1.3.6.1.4.1.3373.1103.80.10.1.2 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtdmE1Framer | 1.3.6.1.4.1.3373.1103.80.10.1.3 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current This object is used to attach the framer to a given E1.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.11 | NA | |||||||||||||||||||
table · not-accessible · current Table with RadioCapabilities entries: there is an entry for each radioTable rows. | |||||||||||||||||||||
| RradioCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.11.1 | NA | |||||||||||||||||||
| CradioCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.11.1.1 | RadioCapability | RO | }@ | |||||||||||||||||
column · RadioCapability · read-only · current Bit map to describe the radio features. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.2 | Integer32 | RO | 71125000 | |||||||||||||||||
column · Integer32 · read-only · current Minimum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.3 | Integer32 | RO | 75875000 | |||||||||||||||||
column · Integer32 · read-only · current Maximum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.4 | Integer32 | RO | 62500 | |||||||||||||||||
column · Integer32 · read-only · current Minimum frequency step in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.11.1.5 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Minimum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.11.1.6 | Integer32 | RO | 20 | |||||||||||||||||
column · Integer32 · read-only · current Maximum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.11.1.7 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Minimum extended Ptx power for fade margin. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioStatusTable | 1.3.6.1.4.1.3373.1103.80.12 | NA | |||||||||||||||||||
table · not-accessible · current Table with RadioStatus records: one record for 1+0 configuration and two record for 1+1 configuration. | |||||||||||||||||||||
| RradioStatusEntry | 1.3.6.1.4.1.3373.1103.80.12.1 | NA | |||||||||||||||||||
| CradioCurrentDuplexFrequency | 1.3.6.1.4.1.3373.1103.80.12.1.1 | Integer32 | RO | 10000000 | |||||||||||||||||
column · Integer32 · read-only · current Spacing between transmitted and received frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxChannelSpacing | 1.3.6.1.4.1.3373.1103.80.12.1.2 | Integer32 | RO | 125000 | |||||||||||||||||
column · Integer32 · read-only · current Half of transmitted signal channel spacing in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioPrx | 1.3.6.1.4.1.3373.1103.80.12.1.3 | Integer32 | RO | -52 | |||||||||||||||||
column · Integer32 · read-only · current Received power level (dBm). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioPtx | 1.3.6.1.4.1.3373.1103.80.12.1.4 | Integer32 | RO | -99 | |||||||||||||||||
column · Integer32 · read-only · current Transmitted power level (dBm). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioNormalizedMse | 1.3.6.1.4.1.3373.1103.80.12.1.5 | Integer32 | RO | 400 | |||||||||||||||||
column · Integer32 · read-only · current Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRxActiveStatus | 1.3.6.1.4.1.3373.1103.80.12.1.6 | INTEGER | RO | cleared(1) | |||||||||||||||||
column · INTEGER · read-only · current Receiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxActiveStatus | 1.3.6.1.4.1.3373.1103.80.12.1.7 | INTEGER | RO | cleared(1) | |||||||||||||||||
column · INTEGER · read-only · current Transmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCableOpenAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.8 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Cable connnecting ODU is open: alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCableShortAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.9 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Cable connnecting ODU is in short-circuit: alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioInvalidFrequencyAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.10 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Invalid frequency alarm with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioBaseBandRxAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.11 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Base Band Rx alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioModulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.12 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Modulator Fail Alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioDemodulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.13 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Demodulator Fail Alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRxPowerLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.14 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Receiver power low alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxPowerLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.15 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Transmitter power low alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRemDemodulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.16 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Remote Demodulator Fail Alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioVcoFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.17 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current RT VCO fail alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRxIFAgcAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.18 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current RT Rx IF AGC fail alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioTxIFAgcAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.19 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current RT Tx IF AGC fail alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioIduOduCommunicationAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.20 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Communication from IDU towards ODU is down Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioOduIduCommunicationAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.21 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Communication from ODU towards IDU is down Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLocalOduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.12.1.22 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Local ODU alarm synthesis with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRemoteOduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.12.1.23 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Local ODU alarm synthesis alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioConfigMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.24 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Config Mismatch alarm status with associated severity and related map. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioConfigAlarmReason | 1.3.6.1.4.1.3373.1103.80.12.1.25 | ConfigMismatchReason | RO | @ | |||||||||||||||||
column · ConfigMismatchReason · read-only · current Bit map to describe the Config Mismatch Alarm Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRxQualityLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.26 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current High BER Alarm status with associated severity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRxQualityWarningAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.27 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current The RX signal is close to cause errors on payload. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioXpd | 1.3.6.1.4.1.3373.1103.80.12.1.28 | Integer32 | RO | 990 | |||||||||||||||||
column · Integer32 · read-only · current Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polarized signal.
This object shows an extimated value of the XPD performed by
the cross-polarization interference canceller (XPIC).
This means that the measure is reliable if:
- XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5),
or radio2p2XpicFD(6))
- Alarm radioDemodulatorFailAlarm is cleared.
- XPD is not too high, since without cross-polar interference
the canceller is not able to works well. Basically, in this
condition, the extimated XPD is greater than the real one.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioXpicAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.29 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current This alarm raises when the xpic configuration isn't working on the specified radioIndex. This could be due to an external issue in case of cable connection or to an internal issue in case of an integrated system. The root cause depends on the hardware characteristics. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioMaintTable | 1.3.6.1.4.1.3373.1103.80.13 | NA | |||||||||||||||||||
table · not-accessible · current Table with Command for maintenance of radio branch. Objects in this table is not persistent. An Instance of this table is created on creation of radioBranchEntry | |||||||||||||||||||||
| RradioMaintEntry | 1.3.6.1.4.1.3373.1103.80.13.1 | NA | |||||||||||||||||||
| CradioTxStatus | 1.3.6.1.4.1.3373.1103.80.13.1.1 | INTEGER | RW | transmitterOn(2) | |||||||||||||||||
column · INTEGER · read-write · current Transmitter status control. The value transmitterOff(1) is related to a manual operation. The value permanentOff(3) is persistent across restart.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioCarrierOnly | 1.3.6.1.4.1.3373.1103.80.13.1.2 | INTEGER | RW | carrierOnlyOff(1) | |||||||||||||||||
column · INTEGER · read-write · current Carrier only transmission control.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLoop | 1.3.6.1.4.1.3373.1103.80.13.1.3 | INTEGER | RW | loopOff(1) | |||||||||||||||||
column · INTEGER · read-write · current Enables/disables the Radio Branch loops.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRFLoopTestResult | 1.3.6.1.4.1.3373.1103.80.13.1.4 | INTEGER | RO | testNone(0) | |||||||||||||||||
column · INTEGER · read-only · current Radio branch RT loop test result.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRFLoopTestPercTime | 1.3.6.1.4.1.3373.1103.80.13.1.5 | INTEGER (0..100) | RO | 0 | |||||||||||||||||
column · INTEGER (0..100) · read-only · current Radio branch RT loop test time percentage Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRtPsuOff | 1.3.6.1.4.1.3373.1103.80.13.1.6 | INTEGER | RW | rtPsuOn(2) | |||||||||||||||||
column · INTEGER · read-write · current It switches on/off the Rt power supply
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLom | 1.3.6.1.4.1.3373.1103.80.13.1.7 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current It is used to enable the IP packet forwarding towards Radio.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioXpic | 1.3.6.1.4.1.3373.1103.80.13.1.8 | INTEGER | RW | enable(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable of the cross polarization interference cancellation of this radio. The value disable is tied to a manual operation (ManOpRecord). This object is applicable only if thiis radio belongs to a 2+0 XPIC or 2+2 XPIC link.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioFrequencyTable | 1.3.6.1.4.1.3373.1103.80.14 | NA | |||||||||||||||||||
table · not-accessible · current Availables channels for selected channel spacing and modulation (see leaf radioFreqTableSelection). | |||||||||||||||||||||
| RradioFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.14.1 | NA | |||||||||||||||||||
| CradioFreqChannelId | 1.3.6.1.4.1.3373.1103.80.14.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Index of the table | |||||||||||||||||||||
| CradioFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.14.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Available channel number. | |||||||||||||||||||||
| CradioFreqValue | 1.3.6.1.4.1.3373.1103.80.14.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Frequency related to radioFreqChannelNum. | |||||||||||||||||||||
| TradioDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.15 | NA | |||||||||||||||||||
table · not-accessible · current Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. | |||||||||||||||||||||
| RradioDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.15.1 | NA | |||||||||||||||||||
row · not-accessible · current Duplex Frequency entry. There is an entry for each available duplex frequency.
| |||||||||||||||||||||
| CradioDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.15.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Index of the table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.15.1.2 | Integer32 | RO | 10000000 | |||||||||||||||||
column · Integer32 · read-only · current Duplex frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioModulationTable | 1.3.6.1.4.1.3373.1103.80.16 | NA | |||||||||||||||||||
table · not-accessible · current List of modulations related to channel spacing. | |||||||||||||||||||||
| RradioModulationEntry | 1.3.6.1.4.1.3373.1103.80.16.1 | NA | |||||||||||||||||||
| CradioChannelSpacing | 1.3.6.1.4.1.3373.1103.80.16.1.1 | ChannelSpacing | RO | 7 | |||||||||||||||||
column · ChannelSpacing · read-only · current This object identifies the channel spacing. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioModulationMap | 1.3.6.1.4.1.3373.1103.80.16.1.2 | ModulationMap | RO | 5f:00 | |||||||||||||||||
column · ModulationMap · read-only · current List of modulations in the radioChanSpacing Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioRefModulationMap | 1.3.6.1.4.1.3373.1103.80.16.1.3 | ModulationMap | RO | 5f:00 | |||||||||||||||||
column · ModulationMap · read-only · current List of modulations that can be selected as reference in the radioChanSpacingId Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkStatusTable | 1.3.6.1.4.1.3373.1103.80.17 | NA | |||||||||||||||||||
table · not-accessible · current Table with LinkStatusEntry. | |||||||||||||||||||||
| RlinkStatusEntry | 1.3.6.1.4.1.3373.1103.80.17.1 | NA | |||||||||||||||||||
| ClinkPolIndex | 1.3.6.1.4.1.3373.1103.80.17.1.1 | INTEGER (1..2) | RO | 1 | |||||||||||||||||
column · INTEGER (1..2) · read-only · current This object identifies the radio polarization. In XPIC radio link identifies one of the polarizations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmRxProfile | 1.3.6.1.4.1.3373.1103.80.17.1.2 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current This object reports the ACM profile number in use in the radio Rx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmTxProfile | 1.3.6.1.4.1.3373.1103.80.17.1.3 | Integer32 | RO | 4 | |||||||||||||||||
column · Integer32 · read-only · current This object reports the ACM profile number in use in the radio Tx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmRxProfileLabel | 1.3.6.1.4.1.3373.1103.80.17.1.4 | DisplayString (SIZE (0..32)) | RO | Profile_1 | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current ASCII string used to describe current acm rx profile Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmTxProfileLabel | 1.3.6.1.4.1.3373.1103.80.17.1.5 | DisplayString (SIZE (0..32)) | RO | Profile_4 | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current ASCII string used to describe current acm tx profile Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmRxModulation | 1.3.6.1.4.1.3373.1103.80.17.1.6 | BitsPerSymbol | RO | 2 | |||||||||||||||||
column · BitsPerSymbol · read-only · current This object is the type of modulation of the Rx profile in use. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmTxModulation | 1.3.6.1.4.1.3373.1103.80.17.1.7 | BitsPerSymbol | RO | 2 | |||||||||||||||||
column · BitsPerSymbol · read-only · current This object is the type of modulation of the Tx profile in use. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmRxCode | 1.3.6.1.4.1.3373.1103.80.17.1.8 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current This object is the type of codificator of the Rx profile in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmTxCode | 1.3.6.1.4.1.3373.1103.80.17.1.9 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current This object is the type of codificator of the Tx profile in use.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkTxETHCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.10 | Integer32 | RO | 369676 | |||||||||||||||||
column · Integer32 · read-only · current This object reports (in Kbits/sec) the transmitted payload capacity used by the Ethernet Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRxETHCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.11 | Integer32 | RO | 54298 | |||||||||||||||||
column · Integer32 · read-only · current This object reports (in Kbits/sec) the received payload capacity used by the Ethernet Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkTxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.12 | Integer32 | RO | 740673 | |||||||||||||||||
column · Integer32 · read-only · current This object reports the capacity in kbit/sec reserved to TDM tributaries in tx ACM profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.13 | Integer32 | RO | 740673 | |||||||||||||||||
column · Integer32 · read-only · current This object reports the capacity in kbit/sec reserved to TDM tributaries in rx ACM profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRescueModulation | 1.3.6.1.4.1.3373.1103.80.17.1.14 | BitsPerSymbol | RO | 2 | |||||||||||||||||
column · BitsPerSymbol · read-only · current This object is the modulation used when the remote terminal is unreachable, ie traffic on radio link is down. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkReducedCapacityAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.15 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current The equipment works in reduced capacity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkLinkTelemetryFailAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.16 | AlarmStatus | RO | 5 | |||||||||||||||||
column · AlarmStatus · read-only · current Fail of link telemetry communication channel with associated Severity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkIdMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.17 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Link Identification Alarm with associated Severity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRadioEocAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.18 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Fail of Radio Eoc link communication channel with associated Severity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkSetupMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.19 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current The local setup doesn't match the setup of remote terminal Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRescueSetupAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.20 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current The equipment is using the setup relative to the rescue modulation Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkXpicProcedureBlockAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.21 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Only for XPIC equipment configurations. Equipment Controller XPIC procedure Alarm control with associated Severity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkXpicRemTxOffAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.22 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Only for XPIC equipment configurations. Remote TX OFF command with associated Severity Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRemoteIduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.17.1.23 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Synthesis of the remote IDU alarms Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkNotMatchingRadiosAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.24 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current Radios of the link does not have matched parameters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkConfigurationInProgress | 1.3.6.1.4.1.3373.1103.80.17.1.25 | INTEGER | RO | cleared(1) | |||||||||||||||||
column · INTEGER · read-only · current The link is being configured and the table linkSettingsTable is not available for modifying parameters.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkXpd | 1.3.6.1.4.1.3373.1103.80.17.1.26 | Integer32 | RO | deprecated | 990 | ||||||||||||||||
column · Integer32 · read-only · deprecated Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polarized signal.
This object shows an extimated value of the XPD performed by
the cross-polarization interference canceller (XPIC).
This means that the measure is reliable if:
- XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5),
or radio2p2XpicFD(6))
- Alarm radioDemodulatorFailAlarm is cleared.
- XPD is not too high, since without cross-polar interference
the canceller is not able to works well. Basically, in this
condition, the extimated XPD is greater than the real one.Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkTfcTable | 1.3.6.1.4.1.3373.1103.80.18 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. This table was deprecated and replaced by linkTfcV2Table. It is a view of the rows of the linkTfcV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers. | |||||||||||||||||||||
| RlinkTfcEntry | 1.3.6.1.4.1.3373.1103.80.18.1 | NA | deprecated | ||||||||||||||||||
| ClinkTfcAction | 1.3.6.1.4.1.3373.1103.80.18.1.1 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).
| |||||||||||||||||||||
| ClinkTfcControl | 1.3.6.1.4.1.3373.1103.80.18.1.2 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system).
| |||||||||||||||||||||
| ClinkTfcWatchWindow | 1.3.6.1.4.1.3373.1103.80.18.1.3 | INTEGER (1..300) | RC | deprecated | |||||||||||||||||
column · INTEGER (1..300) · read-create · deprecated Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcAlarmThreshold | 1.3.6.1.4.1.3373.1103.80.18.1.4 | INTEGER (1..60) | RC | deprecated | |||||||||||||||||
column · INTEGER (1..60) · read-create · deprecated Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcAlarm | 1.3.6.1.4.1.3373.1103.80.18.1.5 | AlarmStatus | RO | deprecated | |||||||||||||||||
column · AlarmStatus · read-only · deprecated Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcRowStatus | 1.3.6.1.4.1.3373.1103.80.18.1.6 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated Status of this conceptual row in linkTfcTable. | |||||||||||||||||||||
| TlinkMaintTable | 1.3.6.1.4.1.3373.1103.80.19 | NA | |||||||||||||||||||
table · not-accessible · current Table with commands for maintenance of radio link. Objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry | |||||||||||||||||||||
| RlinkMaintEntry | 1.3.6.1.4.1.3373.1103.80.19.1 | NA | |||||||||||||||||||
| ClinkBerStart | 1.3.6.1.4.1.3373.1103.80.19.1.1 | INTEGER | RW | stop(2) | |||||||||||||||||
column · INTEGER · read-write · current Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBaseBandLom | 1.3.6.1.4.1.3373.1103.80.19.1.2 | INTEGER | RW | disable(1) | |||||||||||||||||
column · INTEGER · read-write · current It is used to enable the IP packet forwarding towards modems. This item is linked to a manual operation (ManOpRecord) instance.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkFadeMarginMeasure | 1.3.6.1.4.1.3373.1103.80.19.1.3 | INTEGER | RW | deprecated | disable(1) | ||||||||||||||||
column · INTEGER · read-write · deprecated Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. This object is deprecated and replaced by fadeMarginMeasure.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkXpicControlProcedureReset | 1.3.6.1.4.1.3373.1103.80.19.1.4 | INTEGER | RW | notActive(0) | |||||||||||||||||
column · INTEGER · read-write · current Set by manager to reset the XPIC control procedure after a blocking action.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkBerTable | 1.3.6.1.4.1.3373.1103.80.20 | NA | |||||||||||||||||||
table · not-accessible · current Table with Command to estimate BER of radio equipment. Every objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry | |||||||||||||||||||||
| RlinkBerEntry | 1.3.6.1.4.1.3373.1103.80.20.1 | NA | |||||||||||||||||||
| ClinkBerErrorCounterH | 1.3.6.1.4.1.3373.1103.80.20.1.1 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current High 32 bit part of the 64 bit error counter. Bit 32-63. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerErrorCounterL | 1.3.6.1.4.1.3373.1103.80.20.1.2 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Low 32 bit part of the 64 bit error counter. Bit 0-31. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerDataCounterH | 1.3.6.1.4.1.3373.1103.80.20.1.3 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current High 32 bit part of the 64 bit data counter. Bit 32-63. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerDataCounterL | 1.3.6.1.4.1.3373.1103.80.20.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Low 32 bit part of the 64 bit data counter. Bit 0-31. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerSyncLossAlarm | 1.3.6.1.4.1.3373.1103.80.20.1.5 | AlarmStatus | RO | 1 | |||||||||||||||||
column · AlarmStatus · read-only · current BER sync loss alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerSyncLossAlarmCounter | 1.3.6.1.4.1.3373.1103.80.20.1.6 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current BER sync loss events counter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkBerElapsedTime | 1.3.6.1.4.1.3373.1103.80.20.1.7 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current BER measure elapsed time. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkAcmTable | 1.3.6.1.4.1.3373.1103.80.21 | NA | |||||||||||||||||||
table · not-accessible · current Table with link records. | |||||||||||||||||||||
| RlinkAcmEntry | 1.3.6.1.4.1.3373.1103.80.21.1 | NA | |||||||||||||||||||
| ClinkAcmProfileId | 1.3.6.1.4.1.3373.1103.80.21.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current This object identifies the profile number for the radio selected by the object linkAcmId. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmProfileModulation | 1.3.6.1.4.1.3373.1103.80.21.1.2 | BitsPerSymbol | RO | 2 | |||||||||||||||||
column · BitsPerSymbol · read-only · current This object is the modulation of the profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmProfileCode | 1.3.6.1.4.1.3373.1103.80.21.1.3 | INTEGER | RO | normal(1) | |||||||||||||||||
column · INTEGER · read-only · current This object is the type of codificator of the profile.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmProfileCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.4 | Integer32 | RO | 54298 | |||||||||||||||||
column · Integer32 · read-only · current This object is used to contain total capacity of profile (in kbits/sec). Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmProfileLabel | 1.3.6.1.4.1.3373.1103.80.21.1.5 | DisplayString (SIZE (0..32)) | RW | | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current ASCII string used to assign a name to profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmProfileEnable | 1.3.6.1.4.1.3373.1103.80.21.1.6 | INTEGER | RO | enable(2) | |||||||||||||||||
column · INTEGER · read-only · current The object is used to contain if the use of this profile is enabled or disabled
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmMaxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.7 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated This object reports the maximum capacity that can be assigned to the TDM traffic. The capacity is specified in number of E1 (2Mbit/s). This object has been superseded by linkE1vsSTM1CapacityTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmPowerScaling | 1.3.6.1.4.1.3373.1103.80.21.1.8 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable. This object is deprecated: see combinedRadioPowerScalingTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmDownshiftThreshold | 1.3.6.1.4.1.3373.1103.80.21.1.9 | Integer32 | RO | -93 | |||||||||||||||||
column · Integer32 · read-only · current The object is used to contain the downshift threshold in dB/10. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmUpshiftThreshold | 1.3.6.1.4.1.3373.1103.80.21.1.10 | Integer32 | RO | -143 | |||||||||||||||||
column · Integer32 · read-only · current The object is used to contain the upshift threshold in dB/10. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmActiveProfile | 1.3.6.1.4.1.3373.1103.80.21.1.11 | INTEGER | RO | activeRx(2) | |||||||||||||||||
column · INTEGER · read-only · current This object is used to contain the active status of this profile. The value of the object is related to linkAcmRxProfile and linkAcmTxProfile of the LinkStatusEntry.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmTDMCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.12 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current This object reports current TDM capacity (in kbits/sec) of the profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmETHCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.13 | Integer32 | RO | 54298 | |||||||||||||||||
column · Integer32 · read-only · current This object reports current ETH capacity (in Kbits/sec) of the profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmAtpcRxPowerScaling | 1.3.6.1.4.1.3373.1103.80.21.1.14 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. This object is deprecated: see combinedRadioPowerScalingTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkAcmPowerRange | 1.3.6.1.4.1.3373.1103.80.21.1.15 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated This object contains (in dB) the current value of ATPC range. This object is deprecated: see combinedRadioPowerScalingTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkProTable | 1.3.6.1.4.1.3373.1103.80.22 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A list of protection link entries. This table was deprecated and replaced by linkProV2Table. It is a view of the rows of the linkProV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers | |||||||||||||||||||||
| RlinkProEntry | 1.3.6.1.4.1.3373.1103.80.22.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry containing management information applicable to a protected link.
| |||||||||||||||||||||
| ClinkProProtectionTxChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.1 | Integer32 | RC | deprecated | |||||||||||||||||
column · Integer32 · read-create · deprecated This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. | |||||||||||||||||||||
| ClinkProProtectionRxChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.2 | Integer32 | RC | deprecated | |||||||||||||||||
column · Integer32 · read-create · deprecated This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. | |||||||||||||||||||||
| ClinkProTxWtrTime | 1.3.6.1.4.1.3373.1103.80.22.1.3 | INTEGER (0..12) | RC | deprecated | |||||||||||||||||
column · INTEGER (0..12) · read-create · deprecated It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. | |||||||||||||||||||||
| ClinkProRxWtrTime | 1.3.6.1.4.1.3373.1103.80.22.1.4 | INTEGER (0..12) | RC | deprecated | |||||||||||||||||
column · INTEGER (0..12) · read-create · deprecated It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. | |||||||||||||||||||||
| ClinkProTxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.5 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. | |||||||||||||||||||||
| ClinkProRxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.6 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. | |||||||||||||||||||||
| ClinkProTxRevertive | 1.3.6.1.4.1.3373.1103.80.22.1.7 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.
| |||||||||||||||||||||
| ClinkProRxRevertive | 1.3.6.1.4.1.3373.1103.80.22.1.8 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.
| |||||||||||||||||||||
| ClinkProExtraTraffic | 1.3.6.1.4.1.3373.1103.80.22.1.9 | INTEGER | RC | deprecated | |||||||||||||||||
column · INTEGER · read-create · deprecated This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1.
| |||||||||||||||||||||
| ClinkProRowStatus | 1.3.6.1.4.1.3373.1103.80.22.1.10 | RowStatus | RC | deprecated | |||||||||||||||||
column · RowStatus · read-create · deprecated Status of this conceptual row in linkProTable. | |||||||||||||||||||||
| TlinkProMaintTable | 1.3.6.1.4.1.3373.1103.80.23 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProTable. This table was deprecated and replaced by linkProMaintV2Table. It is a view of the rows of the linkProMaintV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers | |||||||||||||||||||||
| RlinkProMaintEntry | 1.3.6.1.4.1.3373.1103.80.23.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry containing maintenance commands applicable to a protected link.
| |||||||||||||||||||||
| ClinkProMaintTxLockout | 1.3.6.1.4.1.3373.1103.80.23.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections.
| |||||||||||||||||||||
| ClinkProMaintRxLockout | 1.3.6.1.4.1.3373.1103.80.23.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections.
| |||||||||||||||||||||
| ClinkProMaintTxForced | 1.3.6.1.4.1.3373.1103.80.23.1.3 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Command to force switch to a given transmission channel. Zero value means no switch. | |||||||||||||||||||||
| ClinkProMaintRxForced | 1.3.6.1.4.1.3373.1103.80.23.1.4 | Integer32 | RW | deprecated | |||||||||||||||||
column · Integer32 · read-write · deprecated Command to force switch to a given receiving channel. Zero value means no switch. | |||||||||||||||||||||
| ClinkProMaintTxWtrReset | 1.3.6.1.4.1.3373.1103.80.23.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Clear wait time to restore making the revertive path immediately available.
| |||||||||||||||||||||
| ClinkProMaintRxWtrReset | 1.3.6.1.4.1.3373.1103.80.23.1.6 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Clear wait time to restore making the revertive path immediately available.
| |||||||||||||||||||||
| TlinkCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.24 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Table with RadioCapabilities entries: there is an entry for each linkTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the capabilities of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable. | |||||||||||||||||||||
| RlinkCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.24.1 | NA | deprecated | ||||||||||||||||||
| ClinkCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.24.1.1 | RadioCapability | RO | deprecated | 7d:00 | ||||||||||||||||
column · RadioCapability · read-only · deprecated Bit map to describe the radio features. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.2 | Integer32 | RO | deprecated | 71125000 | ||||||||||||||||
column · Integer32 · read-only · deprecated Minimum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.3 | Integer32 | RO | deprecated | 75875000 | ||||||||||||||||
column · Integer32 · read-only · deprecated Maximum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.4 | Integer32 | RO | deprecated | 62500 | ||||||||||||||||
column · Integer32 · read-only · deprecated Minimum frequency step in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.24.1.5 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated Minimum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.24.1.6 | Integer32 | RO | deprecated | 20 | ||||||||||||||||
column · Integer32 · read-only · deprecated Maximum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.24.1.7 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
column · Integer32 · read-only · deprecated Minimum extended Ptx power for fade margin. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkFrequencyTable | 1.3.6.1.4.1.3373.1103.80.25 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioFrequencyTable. | |||||||||||||||||||||
| RlinkFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.25.1 | NA | deprecated | ||||||||||||||||||
| ClinkFreqChannelId | 1.3.6.1.4.1.3373.1103.80.25.1.1 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated Index of the table | |||||||||||||||||||||
| ClinkFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.25.1.2 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated Available channel number. | |||||||||||||||||||||
| ClinkFreqValue | 1.3.6.1.4.1.3373.1103.80.25.1.3 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated Frequency related to linkFreqChannelNum. | |||||||||||||||||||||
| TlinkDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.26 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioDuplexFrequencyTable. | |||||||||||||||||||||
| RlinkDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.26.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated Duplex Frequency entry. For each available duplex frequency
| |||||||||||||||||||||
| ClinkDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.26.1.1 | Integer32 | RO | deprecated | 1 | ||||||||||||||||
column · Integer32 · read-only · deprecated Index of the table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.26.1.2 | Integer32 | RO | deprecated | 10000000 | ||||||||||||||||
column · Integer32 · read-only · deprecated Duplex frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkModulationTable | 1.3.6.1.4.1.3373.1103.80.27 | NA | |||||||||||||||||||
table · not-accessible · current List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |||||||||||||||||||||
| RlinkModulationEntry | 1.3.6.1.4.1.3373.1103.80.27.1 | NA | |||||||||||||||||||
| ClinkChannelSpacing | 1.3.6.1.4.1.3373.1103.80.27.1.1 | ChannelSpacing | RO | 7 | |||||||||||||||||
column · ChannelSpacing · read-only · current This object identifies the channel spacing. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkModulationMap | 1.3.6.1.4.1.3373.1103.80.27.1.2 | ModulationMap | RO | 5f:00 | |||||||||||||||||
column · ModulationMap · read-only · current List of modulation in the linkChanSpacing Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClinkRefModulationMap | 1.3.6.1.4.1.3373.1103.80.27.1.3 | ModulationMap | RO | 5f:00 | |||||||||||||||||
column · ModulationMap · read-only · current List of modulations that can be selected as reference in the linkChanSpacingId Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcombinedRadioCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.28 | NA | |||||||||||||||||||
table · not-accessible · current Table with RadioCapabilities entries: there is an entry for each radioSettingTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios belonging to the link. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable. | |||||||||||||||||||||
| RcombinedRadioCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.28.1 | NA | |||||||||||||||||||
| CcombinedRadioCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.28.1.1 | RadioCapability | RO | 7d:00 | |||||||||||||||||
column · RadioCapability · read-only · current Bit map to describe the radio features. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.2 | Integer32 | RO | 71125000 | |||||||||||||||||
column · Integer32 · read-only · current Minimum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.3 | Integer32 | RO | 75875000 | |||||||||||||||||
column · Integer32 · read-only · current Maximum of available channel frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.4 | Integer32 | RO | 62500 | |||||||||||||||||
column · Integer32 · read-only · current Minimum frequency step in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.28.1.5 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Minimum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.28.1.6 | Integer32 | RO | 20 | |||||||||||||||||
column · Integer32 · read-only · current Maximum nominal Ptx in dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.28.1.7 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Minimum extended Ptx power for fade margin. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcombinedRadioFrequencyTable | 1.3.6.1.4.1.3373.1103.80.29 | NA | |||||||||||||||||||
table · not-accessible · current Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |||||||||||||||||||||
| RcombinedRadioFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.29.1 | NA | |||||||||||||||||||
row · not-accessible · current combinedRadioFreqTab record. | |||||||||||||||||||||
| CcombinedRadioFreqChannelId | 1.3.6.1.4.1.3373.1103.80.29.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Index of the table | |||||||||||||||||||||
| CcombinedRadioFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.29.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Available channel number. | |||||||||||||||||||||
| CcombinedRadioFreqValue | 1.3.6.1.4.1.3373.1103.80.29.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Frequency related to combinedRadioFreqChannelNum. | |||||||||||||||||||||
| TcombinedRadioDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.30 | NA | |||||||||||||||||||
table · not-accessible · current Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |||||||||||||||||||||
| RcombinedRadioDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.30.1 | NA | |||||||||||||||||||
row · not-accessible · current Duplex Frequency entry. There is an entry for each available duplex frequency. | |||||||||||||||||||||
| CcombinedRadioDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.30.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Index of the table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.30.1.2 | Integer32 | RO | 10000000 | |||||||||||||||||
column · Integer32 · read-only · current Duplex frequency in KHz. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TcombinedRadioPowerScalingTable | 1.3.6.1.4.1.3373.1103.80.31 | NA | |||||||||||||||||||
table · not-accessible · current List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |||||||||||||||||||||
| RcombinedRadioPowerScalingEntry | 1.3.6.1.4.1.3373.1103.80.31.1 | NA | |||||||||||||||||||
| CcombinedRadioPowerScaling | 1.3.6.1.4.1.3373.1103.80.31.1.1 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioAtpcRxPowerScaling | 1.3.6.1.4.1.3373.1103.80.31.1.2 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcombinedRadioPowerRange | 1.3.6.1.4.1.3373.1103.80.31.1.3 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current This object contains (in dB) the current value of ATPC range. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Tstm1BulkMappingTable | 1.3.6.1.4.1.3373.1103.80.32 | NA | |||||||||||||||||||
table · not-accessible · current Table with entries containing stm-1 bulk transport parameters for a particular link. For each link are present as many rows as the STM-1 that the link can carry in bulk mode. | |||||||||||||||||||||
| Rstm1BulkMappingEntry | 1.3.6.1.4.1.3373.1103.80.32.1 | NA | |||||||||||||||||||
row · not-accessible · current An row in stm1BulkSettingsTable. | |||||||||||||||||||||
| Cstm1BulkPolIndex | 1.3.6.1.4.1.3373.1103.80.32.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Polarization index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Cstm1BulkChanIndex | 1.3.6.1.4.1.3373.1103.80.32.1.2 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current STM-1 channel index. The range of this object is from 1 to N, where N is the number of STM-1 that a link can carry in bulk mode. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Cstm1BulkChannel | 1.3.6.1.4.1.3373.1103.80.32.1.3 | Stm1IndexOrZero | RW | 0 | |||||||||||||||||
column · Stm1IndexOrZero · read-write · current Index of the stm-1 in stm1Table. The SNMP agent will accept only index of a STM-1 present in stm1Table with stm1Structure set to opaque(4). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlinkE1vsSTM1CapacityTable | 1.3.6.1.4.1.3373.1103.80.33 | NA | |||||||||||||||||||
table · not-accessible · current Table with entries containing the E1 cpacity according to the tributaries STM-1 configured to be carried in bulk mode. | |||||||||||||||||||||
| RlinkE1vsSTM1CapacityEntry | 1.3.6.1.4.1.3373.1103.80.33.1 | NA | |||||||||||||||||||
row · not-accessible · current An row in linkE1vsSTM1CapacityTable. | |||||||||||||||||||||
| ClinkE1vsSTM1CapacityStm1 | 1.3.6.1.4.1.3373.1103.80.33.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current Number of tributaries STM-1 configured to be transported in bulk mode. | |||||||||||||||||||||
| ClinkE1vsSTM1CapacityE1 | 1.3.6.1.4.1.3373.1103.80.33.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of E1 that can be carried by this profile according to the the tributaries STM-1 carried in bulk mode. | |||||||||||||||||||||
| TlinkTfcV2Table | 1.3.6.1.4.1.3373.1103.80.34 | NA | |||||||||||||||||||
table · not-accessible · current Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. | |||||||||||||||||||||
| RlinkTfcV2Entry | 1.3.6.1.4.1.3373.1103.80.34.1 | NA | |||||||||||||||||||
| ClinkTfcV2Action | 1.3.6.1.4.1.3373.1103.80.34.1.1 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).
| |||||||||||||||||||||
| ClinkTfcV2Control | 1.3.6.1.4.1.3373.1103.80.34.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system).
| |||||||||||||||||||||
| ClinkTfcV2WatchWindow | 1.3.6.1.4.1.3373.1103.80.34.1.3 | INTEGER (1..300) | RC | ||||||||||||||||||
column · INTEGER (1..300) · read-create · current Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcV2AlarmThreshold | 1.3.6.1.4.1.3373.1103.80.34.1.4 | INTEGER (1..60) | RC | ||||||||||||||||||
column · INTEGER (1..60) · read-create · current Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcV2Alarm | 1.3.6.1.4.1.3373.1103.80.34.1.5 | AlarmStatus | RO | ||||||||||||||||||
column · AlarmStatus · read-only · current Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). | |||||||||||||||||||||
| ClinkTfcV2RowStatus | 1.3.6.1.4.1.3373.1103.80.34.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this conceptual row in linkTfcV2Table. | |||||||||||||||||||||
| TlinkProV2Table | 1.3.6.1.4.1.3373.1103.80.35 | NA | |||||||||||||||||||
table · not-accessible · current A list of protection link entries. | |||||||||||||||||||||
| RlinkProV2Entry | 1.3.6.1.4.1.3373.1103.80.35.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing management information applicable to a protected link.
| |||||||||||||||||||||
| ClinkProV2ProtectionTxChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.1 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. | |||||||||||||||||||||
| ClinkProV2ProtectionRxChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.2 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. | |||||||||||||||||||||
| ClinkProV2TxWtrTime | 1.3.6.1.4.1.3373.1103.80.35.1.3 | INTEGER (0..12) | RC | ||||||||||||||||||
column · INTEGER (0..12) · read-create · current It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. | |||||||||||||||||||||
| ClinkProV2RxWtrTime | 1.3.6.1.4.1.3373.1103.80.35.1.4 | INTEGER (0..12) | RC | ||||||||||||||||||
column · INTEGER (0..12) · read-create · current It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. | |||||||||||||||||||||
| ClinkProV2TxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. | |||||||||||||||||||||
| ClinkProV2RxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. | |||||||||||||||||||||
| ClinkProV2TxRevertive | 1.3.6.1.4.1.3373.1103.80.35.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.
| |||||||||||||||||||||
| ClinkProV2RxRevertive | 1.3.6.1.4.1.3373.1103.80.35.1.8 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.
| |||||||||||||||||||||
| ClinkProV2ExtraTraffic | 1.3.6.1.4.1.3373.1103.80.35.1.9 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1.
| |||||||||||||||||||||
| ClinkProV2RowStatus | 1.3.6.1.4.1.3373.1103.80.35.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this conceptual row in linkProV2Table. | |||||||||||||||||||||
| TlinkProMaintV2Table | 1.3.6.1.4.1.3373.1103.80.36 | NA | |||||||||||||||||||
table · not-accessible · current A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProV2Table. | |||||||||||||||||||||
| RlinkProMaintV2Entry | 1.3.6.1.4.1.3373.1103.80.36.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing maintenance commands applicable to a protected link.
| |||||||||||||||||||||
| ClinkProMaintV2TxLockout | 1.3.6.1.4.1.3373.1103.80.36.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections.
| |||||||||||||||||||||
| ClinkProMaintV2RxLockout | 1.3.6.1.4.1.3373.1103.80.36.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections.
| |||||||||||||||||||||
| ClinkProMaintV2TxForced | 1.3.6.1.4.1.3373.1103.80.36.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Command to force switch to a given transmission channel. Zero value means no switch. | |||||||||||||||||||||
| ClinkProMaintV2RxForced | 1.3.6.1.4.1.3373.1103.80.36.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Command to force switch to a given receiving channel. Zero value means no switch. | |||||||||||||||||||||
| ClinkProMaintV2TxWtrReset | 1.3.6.1.4.1.3373.1103.80.36.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear wait time to restore making the revertive path immediately available.
| |||||||||||||||||||||
| ClinkProMaintV2RxWtrReset | 1.3.6.1.4.1.3373.1103.80.36.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear wait time to restore making the revertive path immediately available.
| |||||||||||||||||||||
| TsspTable | 1.3.6.1.4.1.3373.1103.80.37 | NA | |||||||||||||||||||
table · not-accessible · current A list of operative and administrative set of parameters. This table holds three row for every link (and its polarizations) configured in the NE: 1) administative parameters of local NE 2) operative parameters of local NE 3) administative parameters of remote NE | |||||||||||||||||||||
| RsspEntry | 1.3.6.1.4.1.3373.1103.80.37.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing SSP relevant parameters. | |||||||||||||||||||||
| CsspParameterType | 1.3.6.1.4.1.3373.1103.80.37.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This object identifies what parameters are for.
| |||||||||||||||||||||
| CsspLinkBandwidth | 1.3.6.1.4.1.3373.1103.80.37.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Link Bandwidth (channel spacing).
| |||||||||||||||||||||
| CsspLinkModulation | 1.3.6.1.4.1.3373.1103.80.37.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Link reference modulation.
| |||||||||||||||||||||
| CsspLinkAcmEngineEnable | 1.3.6.1.4.1.3373.1103.80.37.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object is used to enable/disable the ACM engine.
| |||||||||||||||||||||
| CsspLinkTxUpperProfile | 1.3.6.1.4.1.3373.1103.80.37.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. | |||||||||||||||||||||
| CsspLinkTxLowerProfile | 1.3.6.1.4.1.3373.1103.80.37.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. | |||||||||||||||||||||
| CsspLinkSynchSetupProtocolEnable | 1.3.6.1.4.1.3373.1103.80.37.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Synchronization Setup Protocol (SSP) control.
| |||||||||||||||||||||
| CsspLinkProfilesSetSelection | 1.3.6.1.4.1.3373.1103.80.37.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported.
| |||||||||||||||||||||
| CsspTdmE1Channel | 1.3.6.1.4.1.3373.1103.80.37.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s). | |||||||||||||||||||||
| CsspTdmStm1Channel | 1.3.6.1.4.1.3373.1103.80.37.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of STM-1 channels transported in bulk mode. | |||||||||||||||||||||
| TradioLoopCapabilityTable | 1.3.6.1.4.1.3373.1103.80.38 | NA | |||||||||||||||||||
table · not-accessible · current This table shows which group a radio loop belongs to. Radios with the same group number (identifier) close loop simultaneously. | |||||||||||||||||||||
| RradioLoopCapabilityEntry | 1.3.6.1.4.1.3373.1103.80.38.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing a group identifier for each radio loop type.
| |||||||||||||||||||||
| CradioLoopRfGroup | 1.3.6.1.4.1.3373.1103.80.38.1.1 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The group to which the radio RF loop belong to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLoopIqGroup | 1.3.6.1.4.1.3373.1103.80.38.1.2 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The group to which the radio IQ loop belong to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioLoopBaseBandGroup | 1.3.6.1.4.1.3373.1103.80.38.1.3 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The group to which the radio base loop belong to. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioRxBerThresholdTable | 1.3.6.1.4.1.3373.1103.80.39 | NA | |||||||||||||||||||
table · not-accessible · current This table shows the nominal and measured values of RX power at a bit error rate (BER) equal to 10e-6. | |||||||||||||||||||||
| RradioRxBerThresholdEntry | 1.3.6.1.4.1.3373.1103.80.39.1 | NA | |||||||||||||||||||
| CradioRxBerThresholdStatus | 1.3.6.1.4.1.3373.1103.80.39.1.1 | INTEGER | RO | valid(2) | |||||||||||||||||
column · INTEGER · read-only · current This object shows whether the following objects are significant.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioNominalRxBerThreshold | 1.3.6.1.4.1.3373.1103.80.39.1.2 | Integer32 | RO | -512 | |||||||||||||||||
column · Integer32 · read-only · current The nominal value of RX power @ BER equal to 10e-6 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CradioMeasuredRxBerThreshold | 1.3.6.1.4.1.3373.1103.80.39.1.3 | Integer32 | RO | -554 | |||||||||||||||||
column · Integer32 · read-only · current The measured value of RX power @ BER equal to 10e-6. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TradioEchoCancelerTable | 1.3.6.1.4.1.3373.1103.80.40 | NA | |||||||||||||||||||
table · not-accessible · current Table with radio settings entries for Echo Canceler procedure. | |||||||||||||||||||||
| RradioEchoCancelerEntry | 1.3.6.1.4.1.3373.1103.80.40.1 | NA | |||||||||||||||||||
| CradioEchoCancelerFunctionEn | 1.3.6.1.4.1.3373.1103.80.40.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to enable or disable echo canceler calibration function..
| |||||||||||||||||||||
| CradioEchoCancelerCableLenMin | 1.3.6.1.4.1.3373.1103.80.40.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum cable len (Meter range 0 to 300) -. | |||||||||||||||||||||
| CradioEchoCancelerCableLenMax | 1.3.6.1.4.1.3373.1103.80.40.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum cable len (Meter range 0 to 300) -. | |||||||||||||||||||||
| CradioEchoCancelerDelayLine1 | 1.3.6.1.4.1.3373.1103.80.40.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Echo canceler line 1 delay (retrieved by calibration function) -. | |||||||||||||||||||||
| CradioEchoCancelerDelayLine2 | 1.3.6.1.4.1.3373.1103.80.40.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Echo canceler line 2 delay (retrieved by calibration function) -. | |||||||||||||||||||||
| CradioEchoCancStatus | 1.3.6.1.4.1.3373.1103.80.40.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Current echo canceler calibration status.
| |||||||||||||||||||||
| CradioEchoCancStart | 1.3.6.1.4.1.3373.1103.80.40.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Echo canceler calibration function trigger.
| |||||||||||||||||||||
| SradioRemDemodulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.50 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioRemDemodulatorFailAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRxActiveStatusTrapNotification | 1.3.6.1.4.1.3373.1103.80.51 | INTEGER | RW | trapDisable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for radioRxActivestatus
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioTxActiveStatusTrapNotification | 1.3.6.1.4.1.3373.1103.80.52 | INTEGER | RW | trapDisable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Define the severity associated to the radioTxActivestatus and enable/disable the trap generation on status change event.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioCableOpenAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.53 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioCableOpen and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioCableShortAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.54 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioCableShort and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioInvalidFrequencyAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.55 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioInvalidFrequencyAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioBaseBandRxAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.56 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioBaseBandRxAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioModulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.57 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioModulatorFailAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioDemodulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.58 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioDemodulatorFailAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRxPowerLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.59 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioRxPowerLowAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioTxPowerLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.60 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioTxPowerLowAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioVcoFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.61 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioVcoFailAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRxIFAgcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.62 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioRxIFAgcAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioTxIFAgcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.63 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioTxIFAgcAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioIduOduCommunicationAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.64 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioIduOduCommunicationAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioOduIduCommunicationAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.65 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioOduIduCommunicationAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioLocalOduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.66 | AlarmSeverityCode | RW | 18 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioLocalOduAlarmSynthesis and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRemoteOduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.67 | AlarmSeverityCode | RW | 18 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioRemoteOduAlarmSynthesis and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioConfigMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.68 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the radioConfigMismatchAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioPrxHysteresisValue | 1.3.6.1.4.1.3373.1103.80.69 | Integer32 | RW | 3 | |||||||||||||||||
scalar · Integer32 · read-write · current Defines the delta value associated to the radioPrx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioPtxHysteresisValue | 1.3.6.1.4.1.3373.1103.80.70 | Integer32 | RW | 3 | |||||||||||||||||
scalar · Integer32 · read-write · current Defines the delta value associated to the radioPtx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioPrxHysteresisValueTrapNotification | 1.3.6.1.4.1.3373.1103.80.71 | INTEGER | RW | trapEnable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enables/disables the Rx change trap generation on status change event.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioPtxHysteresisValueTrapNotification | 1.3.6.1.4.1.3373.1103.80.72 | INTEGER | RW | trapEnable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enables/disables the Tx change trap generation on status change event.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRxQualityLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.73 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioRxQualityLowAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioRxQualityWarningAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.74 | AlarmSeverityCode | RW | 19 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioRxQualityWarningAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkReducedCapacityAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.75 | AlarmSeverityCode | RW | 19 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkReducedCapacityAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkLinkTelemetryFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.76 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkLinkTelemetryFailAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkIdMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.77 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkIdMismatchAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkRadioEocAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.78 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkRadioEocAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkSetupMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.79 | AlarmSeverityCode | RW | 3 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkSetupMismatchAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkRescueSetupAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.80 | AlarmSeverityCode | RW | 6 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkRescueSetupAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkXpicProcedureBlockAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.81 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkXpicProcedureBlockAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkXpicRemTxOffAlarmAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.82 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkXpicRemTxOffAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkLocalIduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.83 | AlarmStatus | RO | 1 | |||||||||||||||||
scalar · AlarmStatus · read-only · current Synthesis of the local IDU alarms Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkLocalIduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.84 | AlarmSeverityCode | RW | 18 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkRemoteIduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.85 | AlarmSeverityCode | RW | 18 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkTfcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.86 | AlarmSeverityCode | RW | 20 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkTfcV2Alarm (linkTfcAlarm) and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkBerSyncLossAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.87 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkBerSyncLossAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkNotMatchingRadiosAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.88 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the linkNotMatchingRadiosAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SchannelSpacingSelection | 1.3.6.1.4.1.3373.1103.80.89 | Bits | RW | ? | |||||||||||||||||
scalar · Bits · read-write · current his object selects which channel spacings the radio link has to
support:
- etsi: Compliant with European Telecommunication Standards
Institute
- fcc: Compliant with Federal Communications Commission
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SfadeMarginMeasure | 1.3.6.1.4.1.3373.1103.80.90 | INTEGER | RW | disable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SlinkConfigurationInProgressTrapNotification | 1.3.6.1.4.1.3373.1103.80.91 | INTEGER | RW | trapEnable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for linkConfigurationInProgress
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SradioXpicAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.92 | AlarmSeverityCode | RW | 21 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Define the severity associated to the radioXpicAlarm and enable/disable the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
Textual conventions
BitsPerSymbolINTEGERbps1024QAM(10)bps128QAM(7)bps16QAM(4)bps2048QAM(11)bps256QAM(8)bps32QAM(5)bps4096QAM(12)bps4QAM(2)bps512QAM(9)bps64QAM(6)bps8PSK(3)bpsBPSK(1)his TC describes a data type which identifies a RF channel spacing.
ChannelSpacingINTEGERbw1000Mhz(10)bw10Mhz(11)bw112MHz(6)bw125Mhz(19)bw14MHz(2)bw1500Mhz(20)bw2000Mhz(17)bw20Mhz(12)bw250Mhz(7)bw28MHz(3)bw30Mhz(13)bw3M5Hz(0)bw40MHz(5)bw500Mhz(8)bw50Mhz(14)bw56MHz(4)bw60Mhz(15)bw62M5hz(18)bw750Mhz(9)bw7Mhz(1)bw80Mhz(16)This TC describes a data type which identifies a RF channel spacing.
ConfigMismatchReasonBitsacmMismatch(6)channelSpacingAndModulationMismatch(4)frequencyAlertMismatch(2)frequencyFailMismatch(1)profileSetMismatch(7)ptxMismatch(3)remoteConfigurationMismatch(5)securityMismatch(0)This data type is used to specify the cause of Config Mismatch Alarm, that is the mismatch between the radio link capability and the current local and remote configuration. - securityMismatch(0) Copyright violation - frequencyFailMismatch(1) Configured frequency is out of Filter-Bandwidth - frequencyAlertMismatch(2) Configured frequency across Filter-Bandwidth - ptxMismatch(3) Tx power configured incongruent with RF Tx power limits - channelSpacingAndModulationMismatch(4) Bandwidth and/or modulation configured is invalid (RF doesn't support it) - remoteConfigurationMismatch(5) Incongruence between the couple of Terminal Radio Unit (TRU) in the link: - Frequency Incongruent (Freq) - Reference Bandwidth and Modulation incongruent - Acm-Tx map in congruent with remote Acm-Rx map - acmMismatch(6) Obsolete (no longer used) - profileSetMismatch(7) The selected profile set is not supported by the TRUModulationMapBitsmod1024QAM(9)mod128QAM(6)mod16QAM(3)mod2048QAM(10)mod256QAM(7)mod32QAM(4)mod4096QAM(11)mod4QAM(1)mod512QAM(8)mod64QAM(5)mod8PSK(2)modBPSK(0)This data type is used as the syntax of the radioBranchModulationMap and radioBranchRefModulationMap objects.
RadioCapabilityBitsatpcMinPower(9)baseBandLoop(2)carrierOnly(4)echoCanceler(10)iQLoop(5)iQLoopAtRxFreq(8)maxPower(3)reserved(0)rfLoopAnyMod(7)rfLoopGivenMod(6)trafficSquelch(1)This data type is used as the syntax of the radioBranchKeyFeatures objects.
Stm1IndexOrZeroInteger32 (0..2147483647)Display hint:
dThis textual convention permits the additional value of zero to an stm1Index in stm1Table. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where stm-1 was unknown, or when none or all stm-1s need to be referenced.
Traps / Notifications
- radioPrxChange
1.3.6.1.4.1.3373.1103.0.8001 - radioPtxChange
1.3.6.1.4.1.3373.1103.0.8002