SIAE-QUEUE-DEPTH-MIB
SIAE Microelettronica S.p.A.Queue depth management for SIAE equipments.
snmptranslate -m SIAE-QUEUE-DEPTH-MIB -Tpsnmpwalk -v2c -c <community> -m SIAE-QUEUE-DEPTH-MIB <host> 1.3.6.1.4.1.3373.1103.84Imports
| SIAE-ALARM-MIB | AlarmSeverityCode, AlarmStatus |
|---|---|
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IqueueDepth | 1.3.6.1.4.1.3373.1103.84 | ||||||||||||||||||||
identity Queue depth management for SIAE equipments. | |||||||||||||||||||||
| SqueueDepthMibVersion | 1.3.6.1.4.1.3373.1103.84.1 | INTEGER | RO | 10000 | |||||||||||||||||
scalar · INTEGER · read-only · current Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TqdProfileTable | 1.3.6.1.4.1.3373.1103.84.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of queue depth profile entries. This table is useful to show to the manager available profiles and its feature. | |||||||||||||||||||||
| RqdProfileEntry | 1.3.6.1.4.1.3373.1103.84.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information about each queue depth settings realized by a profile.
| |||||||||||||||||||||
| CqdProfileIndex | 1.3.6.1.4.1.3373.1103.84.2.1.1 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current A unique value, greater than zero, for each queue depth profile. It is recommended that values are assigned contiguously starting from 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CqdProfileName | 1.3.6.1.4.1.3373.1103.84.2.1.2 | DisplayString (SIZE (0..64)) | RO | Full dynamic memory (All HW) | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current A brief description of the settings realized by this profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CqdProfileDescription | 1.3.6.1.4.1.3373.1103.84.2.1.3 | DisplayString1024 | RO | ||||||||||||||||||
column · DisplayString1024 · read-only · current A detailed description of the settings realized by this profile. | |||||||||||||||||||||
| SqdProfileSelect | 1.3.6.1.4.1.3373.1103.84.3 | Integer32 | RW | 1 | |||||||||||||||||
scalar · Integer32 · read-write · current This object selects a queue depth profile from qdProfileTable to be applied after a cold restart. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SqdActualProfile | 1.3.6.1.4.1.3373.1103.84.4 | Integer32 | RO | 1 | |||||||||||||||||
scalar · Integer32 · read-only · current This object shows the actual queue profile in use. The object content is set upon restart equal to qdProfileSelect and is never changed, since a new profile will be applied after a next cold restart. The value 0 means the actual profile is unknown. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SqdProfileMismatchAlarm | 1.3.6.1.4.1.3373.1103.84.5 | AlarmStatus | RO | 1 | |||||||||||||||||
scalar · AlarmStatus · read-only · current This alarm is raise when the actual profile is not equal to the selected profile. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SqdProfileMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.84.6 | AlarmSeverityCode | RW | 3 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the qdProfileMismatchAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||
Textual conventions
DisplayString1024OCTET STRING (SIZE (0..1024))Display hint:
1024aRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length.