SIAE-MAB-MIB
SIAE Microelettronica S.p.A.Microwave Adaptive Bandwidth (MAB) This management information module supports the configuration of the MW Capacity Management (MCM) feature developed by SIAE MICROELETTRONICA and Cisco that offers reliable QoS and optimized performances even under worst radio propagation conditions. The extension to the original functionality, consisting of the Link ID TLV, is considered by this MIB.
snmptranslate -m SIAE-MAB-MIB -Tpsnmpwalk -v2c -c <community> -m SIAE-MAB-MIB <host> 1.3.6.1.4.1.3373.1103.93Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ImabMib | 1.3.6.1.4.1.3373.1103.93 | ||||||||||||
identity Microwave Adaptive Bandwidth (MAB) This management information module supports the configuration of the MW Capacity Management (MCM) feature developed by SIAE MICROELETTRONICA and Cisco that offers reliable QoS and optimized performances even under worst radio propagation conditions. The extension to the original functionality, consisting of the Link ID TLV, is considered by this MIB. | |||||||||||||
| SmabMibVersion | 1.3.6.1.4.1.3373.1103.93.1 | INTEGER | RO | 10220 | |||||||||
scalar · INTEGER · read-only · current Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01. Example values from LibreNMS test devices
| |||||||||||||
| TmabSensorTable | 1.3.6.1.4.1.3373.1103.93.2 | NA | |||||||||||
table · not-accessible · current Table with MAB sensors entries. Each sensor is associated to a interface, usually an interface with the physical layer consisting of a radio link, and comapares the current bandwidth (throughput) with the nominal one. When nominal and current bandwidth doesn't match to PDU senders associated with a sensor is required to send a MAB PDU every observation time. | |||||||||||||
| RmabSensorEntry | 1.3.6.1.4.1.3373.1103.93.2.1 | NA | |||||||||||
| CmabSensorIndex | 1.3.6.1.4.1.3373.1103.93.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the MAB sensor inside the Network Element. | |||||||||||||
| CmabSensorRowStatus | 1.3.6.1.4.1.3373.1103.93.2.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this MAB sensor entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value: mabSensorIfIndex must be set to a valid ifIndex number. Otherwise, the error inconsistentValue is returned on the attempt to set active this row. When set to notInService changes may be made to mabSensorIfIndex. Other objects can be changed when mabSensorRowStatus is set to active. A sensor can not be deleted if there is any MAB PDU sender associated with it. | |||||||||||||
| CmabSensorAdminStatus | 1.3.6.1.4.1.3373.1103.93.2.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Administative status of the MAB sensor. The value down(1) turn off all MAB advisers associated with this sensor.
| |||||||||||||
| CmabSensorIfIndex | 1.3.6.1.4.1.3373.1103.93.2.1.4 | InterfaceIndex | RC | ||||||||||
column · InterfaceIndex · read-create · current This object accepts a greater than zero value to identify an interface in ifTable. The throughput of the selected interface is monitored and notified to all MAB PDU sender associated with this sensor. | |||||||||||||
| CmabSensorLinkId | 1.3.6.1.4.1.3373.1103.93.2.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object set the (radio) link identifier that will be inserted in the Link ID TLV of the MAB PDU. | |||||||||||||
| CmabSensorBwMode | 1.3.6.1.4.1.3373.1103.93.2.1.6 | MabBwCalculationMethod | RC | ||||||||||
column · MabBwCalculationMethod · read-create · current This object defines the method of calculation of the current bandwidth. The value of this parameter is sent inside MAB PDUs. | |||||||||||||
| CmabSensorHoldoffTime | 1.3.6.1.4.1.3373.1103.93.2.1.7 | Integer32 (10..60) | RC | ||||||||||
column · Integer32 (10..60) · read-create · current This object defines the wait time (in seconds) for MAB protocol before sending packets if the current bandwidth (throughput) is lower than the nominal. | |||||||||||||
| CmabSensorObservationTime | 1.3.6.1.4.1.3373.1103.93.2.1.8 | Integer32 (1 | 10 | 60) | RC | ||||||||||
column · Integer32 (1 | 10 | 60) · read-create · current This object defines the observation time (in seconds) for MAB protocol during which calculate the minimum, maximum and average value of the current bandwidth (throughput). At the end of each period, a MAB PDU is sent by every MAB PDU sender associated with this sensor. | |||||||||||||
| CmabSensorFastTime | 1.3.6.1.4.1.3373.1103.93.2.1.9 | Integer32 (1..59) | RC | ||||||||||
column · Integer32 (1..59) · read-create · current This value is used in place of mabSensorObservationTime for the first mabSensorFastCount PDU packets sent by a MAB PDU sender. The value of mabSensorFastTime must be less than or equal to mabSensorObservationTime. | |||||||||||||
| CmabSensorFastCount | 1.3.6.1.4.1.3373.1103.93.2.1.10 | Integer32 (0..60) | RC | ||||||||||
column · Integer32 (0..60) · read-create · current This value specifies how many MAB PDU packets are sent every mabSensorFastTime before to use the standard observation time (mabSensorObservationTime). Zero means which quick sending of packets is disabled. | |||||||||||||
| TmabSensorStatusTable | 1.3.6.1.4.1.3373.1103.93.3 | NA | |||||||||||
table · not-accessible · current Table with the status of MAB sensor entries. For each row in mabSensorTable a row is created in this table. | |||||||||||||
| RmabSensorStatusEntry | 1.3.6.1.4.1.3373.1103.93.3.1 | NA | |||||||||||
| CmabSensorNominalBw | 1.3.6.1.4.1.3373.1103.93.3.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object reports the nominal bandwidth (throughput) of the interface selected by mabSensorIfIndex. | |||||||||||||
| CmabSensorCurrentBw | 1.3.6.1.4.1.3373.1103.93.3.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object reports the current bandwidth (throughput) of the interface selected by mabSensorIfIndex and calculated according to the method set in mabSensorBwMode. | |||||||||||||
| TmabPduSenderTable | 1.3.6.1.4.1.3373.1103.93.4 | NA | |||||||||||
table · not-accessible · current Table with MAB PDU sender entries. Each PDU sender refers to an ifIndex in ifTable on which to send a PDU MAB and a sensor that triggers the sending. | |||||||||||||
| RmabPduSenderEntry | 1.3.6.1.4.1.3373.1103.93.4.1 | NA | |||||||||||
| CmabPduSenderIndex | 1.3.6.1.4.1.3373.1103.93.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the MAB PDU sender inside the Network Element. | |||||||||||||
| CmabPduSenderRowStatus | 1.3.6.1.4.1.3373.1103.93.4.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this mabPduSender entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value: mabPduSenderIfIndex must be set to a valid ifIndex number and mabPduSenderSensorIndex must be set to a valid MAB sensor, Otherwise, the error inconsistentValue is returned on the attempt to set active this row. When set to notInService changes may be made to mabPduSenderIfIndex, mabPduSenderSensorIndex. Other objects can be changed when mabPduSenderRowStatus is set to active. | |||||||||||||
| CmabPduSenderAdminStatus | 1.3.6.1.4.1.3373.1103.93.4.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Administative status of the MAB PDU sender.
| |||||||||||||
| CmabPduSenderIfIndex | 1.3.6.1.4.1.3373.1103.93.4.1.4 | InterfaceIndex | RC | ||||||||||
column · InterfaceIndex · read-create · current This object accepts a greater than zero value to identify an interface in ifTable. MAB PDU is sent over this interface. | |||||||||||||
| CmabPduSenderSensorIndex | 1.3.6.1.4.1.3373.1103.93.4.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object associates a MAB sensor to this PDU sender. | |||||||||||||
| CmabPduSenderVlanId | 1.3.6.1.4.1.3373.1103.93.4.1.6 | Integer32 (0 | 1..4094) | RC | ||||||||||
column · Integer32 (0 | 1..4094) · read-create · current This object defines the VLAN identifier used to tag the MAB PDU. Zero means the PDU is not tagged. | |||||||||||||
| CmabPduSenderPcp | 1.3.6.1.4.1.3373.1103.93.4.1.7 | Integer32 (0..7) | RC | ||||||||||
column · Integer32 (0..7) · read-create · current This object defines packet priority written into the tag of the MAB PDU. | |||||||||||||
| CmabPduSenderOamMaintLevel | 1.3.6.1.4.1.3373.1103.93.4.1.8 | Integer32 (0..7) | RC | ||||||||||
column · Integer32 (0..7) · read-create · current This object defines the OAM maintenance level of the MAB PDU. The multicast destination address of the PDU is according to the selected maintenance level: 01-80-C2-00-00-3x where x = Maintenance Level | |||||||||||||
| CmabPduSenderDAType | 1.3.6.1.4.1.3373.1103.93.4.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object defines the destination MAC address type of the PDU: - multicastDA(1): Multicast Class 1 Destination Address (DA) - unicastDA(2): Unicast Destination Address (DA)
| |||||||||||||
| CmabPduSenderUnicastDA | 1.3.6.1.4.1.3373.1103.93.4.1.10 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current This object defines the unuicast destination address of the PDU when mabPduSenderDAType is set to unicastDA(2). | |||||||||||||
| CmabPduSenderOption | 1.3.6.1.4.1.3373.1103.93.4.1.11 | MabSenderOption | RC | ||||||||||
column · MabSenderOption · read-create · current This object enable the option supported by the MAB PDU sender:
- enableAlways: Enable periodic PDU sending even if the
current bandwidth is equal to the nominal
bandwidth.
- enableSignalFail: PDU are transmitted periodically when the
link fails in the tranmit direction. If the
NE usually sends PDUs also when the radio
bandwitdh (or the throughput of an interface)
is null, this option has no effect. | |||||||||||||
| CmabPduSenderPduCompliance | 1.3.6.1.4.1.3373.1103.93.4.1.12 | MabPduCompliance | RC | ||||||||||
column · MabPduCompliance · read-create · current This object defines the compliance of the MAB PDU format. | |||||||||||||
Textual conventions
MabBwCalculationMethodINTEGERaverage(1)max(3)min(2)This Textual Convention describes the method of calculation of the radio bandwitdh (or the throughput of an interface): - average: Average Tx BW value across the observation interval - min: Minimum Tx BW value across the observation interval - max: Maximum Tx BW value across the observation interval
MabPduComplianceINTEGERextMcmCompliant(2)ituG8013Compliant(3)stdMcmCompliant(1)This Textual Convention describes the compliance of the MAB PDU sent by a MAB PDU sender: - stdMcmCompliant: PDU format is compliant with [1] - extMcmCompliant: PDU format is compliant with [2] - ituG8013Compliant: PDU format is compliant with [4] Since [3] and [4] are a draft edition at the time when this MIB is being written, the value ituG8013Compliant(3) is defined for future use.
MabSenderOptionBitsenableAlways(0)enableSignalFail(1)This Textual Convention describes the supported option of a MAB PDU sender: - enableAlways: Enable periodic PDU sending even if the current bandwidth is equal to the nominal bandwidth. - enableSignalFail: PDU are transmitted periodically when the link fails in the tranmit direction. If the NE usually sends PDUs also when the radio bandwitdh (or the throughput of an interface) is null, this option has no effect.