SIAE-LLF-MIB
SIAE Microelettronica S.p.A.SIAE's Link Loss Forwarding MIB.
snmptranslate -m SIAE-LLF-MIB -Tpsnmpwalk -v2c -c <community> -m SIAE-LLF-MIB <host> 1.3.6.1.4.1.3373.1103.85Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SIAE-ALARM-MIB | AlarmSeverityCode, AlarmStatus |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Illf | 1.3.6.1.4.1.3373.1103.85 | ||||||||||||||||||||
identity SIAE's Link Loss Forwarding MIB. | |||||||||||||||||||||
| SllfMibVersion | 1.3.6.1.4.1.3373.1103.85.1 | INTEGER | RO | 10000 | |||||||||||||||||
scalar · INTEGER · read-only · current Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TllfTable | 1.3.6.1.4.1.3373.1103.85.2 | NA | |||||||||||||||||||
table · not-accessible · current Table with SIAE's LLF entries. | |||||||||||||||||||||
| RllfEntry | 1.3.6.1.4.1.3373.1103.85.2.1 | NA | |||||||||||||||||||
| CllfIndex | 1.3.6.1.4.1.3373.1103.85.2.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current A unique value, greater than zero, for each interface supporting LLF. This object is identical to the ifIndex of the standard MIB-2 ifTable. | |||||||||||||||||||||
| CllfEnable | 1.3.6.1.4.1.3373.1103.85.2.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current On interfaces supporting LLF, this object is used to disable or enable LLF towards local LAN interfaces.
| |||||||||||||||||||||
| CllfUnidirectionalFault | 1.3.6.1.4.1.3373.1103.85.2.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current When enable is set, a local link fault causes LLF on both local and remote interfaces.
| |||||||||||||||||||||
| CllfDelayTime | 1.3.6.1.4.1.3373.1103.85.2.1.4 | INTEGER (0..10) | RC | ||||||||||||||||||
column · INTEGER (0..10) · read-create · current The LLF delay time specifies the time interval (in seconds) to wait for to actuate or to remove the Link Loss Forwarding condition. | |||||||||||||||||||||
| CllfProtectionMode | 1.3.6.1.4.1.3373.1103.85.2.1.5 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current When protection mode is enabled, LLF alarm is issued only when all radio links or circuits connected to interface are alarmed.
| |||||||||||||||||||||
| CllfAlarm | 1.3.6.1.4.1.3373.1103.85.2.1.6 | AlarmStatus | RO | ||||||||||||||||||
column · AlarmStatus · read-only · current Interface Link Loss Forwarding alarm status. | |||||||||||||||||||||
| CllfRowStatus | 1.3.6.1.4.1.3373.1103.85.2.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this row of llfTable. This object may not be set to destroy until at least a circuit belong to this LLF interface. In other words, circuits must be deleted before a LLF interface. | |||||||||||||||||||||
| TllfMapTable | 1.3.6.1.4.1.3373.1103.85.3 | NA | |||||||||||||||||||
table · not-accessible · current This table map llf interface on llf circuits. | |||||||||||||||||||||
| RllfMapEntry | 1.3.6.1.4.1.3373.1103.85.3.1 | NA | |||||||||||||||||||
row · not-accessible · current SIAE's llf cross-connection entry. | |||||||||||||||||||||
| CllfMapLinkIndex | 1.3.6.1.4.1.3373.1103.85.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Radio link identifier. With llfMapPolIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable. | |||||||||||||||||||||
| CllfMapPolIndex | 1.3.6.1.4.1.3373.1103.85.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Radio polarization identifier. With llfMapLinkIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable. | |||||||||||||||||||||
| CllfMapCircuitIndex | 1.3.6.1.4.1.3373.1103.85.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LLF circuit identifier. With llfMapLinkIndex and llfMapPolIndex it points to a specific instance of llfCircuitTable. | |||||||||||||||||||||
| CllfMapLosInsertion | 1.3.6.1.4.1.3373.1103.85.3.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enable or disable insertion of interface LOS into a specified circuit. The inserted LOS is transported through the radio link.
| |||||||||||||||||||||
| CllfMapInsertionMode | 1.3.6.1.4.1.3373.1103.85.3.1.5 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current In single mode, LOS is inserted in the circuit if the relative interface has a LOS alarm. In group mode, LOS is inserted when all (grouped) interfaces mapped to the same circuit have a LOS alarm.
| |||||||||||||||||||||
| CllfMapSignalFail | 1.3.6.1.4.1.3373.1103.85.3.1.6 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Alarm condition detected on specified circuit. | |||||||||||||||||||||
| CllfMapRowStatus | 1.3.6.1.4.1.3373.1103.85.3.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Status of this row of llfMapTable | |||||||||||||||||||||
| TllfCircuitTable | 1.3.6.1.4.1.3373.1103.85.4 | NA | |||||||||||||||||||
table · not-accessible · current Table describing llf circuits available over each link. This circuits can be connected to available interfaces via llfMapTable. | |||||||||||||||||||||
| RllfCircuitEntry | 1.3.6.1.4.1.3373.1103.85.4.1 | NA | |||||||||||||||||||
row · not-accessible · current SIAE's llf circuit entry. | |||||||||||||||||||||
| CllfCircuitLinkIndex | 1.3.6.1.4.1.3373.1103.85.4.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Radio link identifier. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CllfCircuitPolIndex | 1.3.6.1.4.1.3373.1103.85.4.1.2 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Radio polarization identifier. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CllfCircuitIndex | 1.3.6.1.4.1.3373.1103.85.4.1.3 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current LLF circuit identifier. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CllfCircuitLinkLabel | 1.3.6.1.4.1.3373.1103.85.4.1.4 | DisplayString (SIZE (0..32)) | RO | Link 1 | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current ASCII string used to assign a name to the radio link and polarization. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CllfCircuitRowStatus | 1.3.6.1.4.1.3373.1103.85.4.1.5 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current Status of this row of llfCircuitTable Example values from LibreNMS test devices
| |||||||||||||||||||||
| SllfAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.85.5 | AlarmSeverityCode | RW | 5 | |||||||||||||||||
scalar · AlarmSeverityCode · read-write · current Defines the severity associated to the llfAlarm and enables/disables the trap generation on status change event. Example values from LibreNMS test devices
| |||||||||||||||||||||