NETSCREEN-VPN-IKE-MIB
NetScreen Technologies, Inc.This module defines the object that are used to monitor VPN IKE info
snmptranslate -m NETSCREEN-VPN-IKE-MIB -Tpsnmpwalk -v2c -c <community> -m NETSCREEN-VPN-IKE-MIB <host> 1.3.6.1.4.1.3224.4.0.3Imports
| NETSCREEN-SMI | netscreenVpn, netscreenVpnMibModule |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| InetscreenVpnIkeMibModule | 1.3.6.1.4.1.3224.4.0.3 | |||
identity This module defines the object that are used to monitor VPN IKE info | ||||
| NnsVpnIke | 1.3.6.1.4.1.3224.4.3 | |||
| TnsVpnIkeTable | 1.3.6.1.4.1.3224.4.3.1 | NA | ||
table · not-accessible · current IPSec supports the automated generation and negotiation of keys and security associations using the Internet Key Exchange(IKE) protocol. This table collects the IKE configuration in NetScreen device. | ||||
| RnsVpnIkeEntry | 1.3.6.1.4.1.3224.4.3.1.1 | NA | ||
row · not-accessible · current Each entry in the nsVpnIkeTable holds a set of configuration parameters associated with an IKE.
| ||||
| CnsVpnIkeIndex | 1.3.6.1.4.1.3224.4.3.1.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current A unique value for ike table. Its value ranges between 0 and 65535 and may not be contiguous. | ||||
| CnsVpnIkeName | 1.3.6.1.4.1.3224.4.3.1.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Each IKE configuration can have a readable name. | ||||
| CnsVpnIkeReplayProc | 1.3.6.1.4.1.3224.4.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable Replay Protection
| ||||
| CnsVpnIkeGWTun | 1.3.6.1.4.1.3224.4.3.1.1.4 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Remote Gateway Tunnel Name | ||||
| CnsVpnIkePh2ProOne | 1.3.6.1.4.1.3224.4.3.1.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Phase 2 Proposal one | ||||
| CnsVpnIkePh2ProTwo | 1.3.6.1.4.1.3224.4.3.1.1.6 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Phase 2 Proposal two | ||||
| CnsVpnIkePh2ProThree | 1.3.6.1.4.1.3224.4.3.1.1.7 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Phase 2 Proposal three | ||||
| CnsVpnIkePh2ProFour | 1.3.6.1.4.1.3224.4.3.1.1.8 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Phase 2 Proposal four | ||||
| CnsVpnIkeMonitorEnable | 1.3.6.1.4.1.3224.4.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Enable to monitor VPN tunnel's link status.
| ||||
| CnsVpnIkeTransMode | 1.3.6.1.4.1.3224.4.3.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Transport Mode Enable (For L2TP-over-IPSec only)
| ||||
| CnsVpnIkeVsys | 1.3.6.1.4.1.3224.4.3.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current vsys the configuration belongs to. | ||||