NETSCREEN-POLICY-MIB
NetScreen Technologies, Inc.This module defines NetScreen private MIBs for Policy Monitoring
snmptranslate -m NETSCREEN-POLICY-MIB -Tpsnmpwalk -v2c -c <community> -m NETSCREEN-POLICY-MIB <host> 1.3.6.1.4.1.3224.10.0Imports
| NETSCREEN-SMI | netscreenPolicy |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| InetscreenPolicyMibModule | 1.3.6.1.4.1.3224.10.0 | |||
identity This module defines NetScreen private MIBs for Policy Monitoring | ||||
| TnsPlyTable | 1.3.6.1.4.1.3224.10.1 | NA | ||
table · not-accessible · current A firewall provides a network boundary with a single point of entry and exit-a choke point.You can screen and direct all that traffic through the implementation of a set of access policies. Access policies allow you to permit, deny, encrypt, authenticate, prioritize, schedule, and monitor the traffic attemption to cross your firewall. This table collects all the policy configuration information existing in NetScreen Device. | ||||
| RnsPlyEntry | 1.3.6.1.4.1.3224.10.1.1 | NA | ||
| CnsPlyId | 1.3.6.1.4.1.3224.10.1.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Each policy is identified by a unique policy ID. | ||||
| CnsPlyVsys | 1.3.6.1.4.1.3224.10.1.1.2 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Vitural system's name this polic entry belongs to. | ||||
| CnsPlySrcZone | 1.3.6.1.4.1.3224.10.1.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Traffic through a firewall means that traffic flows from one security zone to another. This object describes the source zone name traffic flow passes. | ||||
| CnsPlyDstZone | 1.3.6.1.4.1.3224.10.1.1.4 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Traffic through a firewall means that traffic flows from one security zone to another. This object describes the destination zone name traffic flow passes. | ||||
| CnsPlySrcAddr | 1.3.6.1.4.1.3224.10.1.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall on which security zone.To create an access policy for specific addresses, you must first create entries for the relevant hosts and networks in the address book.Source IP address indicates the address in source zone, 0.0.0.0 means any address. | ||||
| CnsPlyDstAddr | 1.3.6.1.4.1.3224.10.1.1.6 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall-on which security zone.To create an access policy for specific addresses, you must first create entries for the relevant hosts and networks in the address book.Source IP address indicates the address in destination zone, 0.0.0.0 means any address. | ||||
| CnsPlyService | 1.3.6.1.4.1.3224.10.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Sevices are objects that identify application protocols using layer 4 information such as standard and accepted TCP and UDP port numbers for application services like Telnet, FTP, SMTP and HTTP. This object indicates all the traffic service type this policy allows. 'Any' means all this policy allows all service go through. 'Other' could be a configured service or not in the list. See nsPlyServiceName for service name.
| ||||
| CnsPlyAction | 1.3.6.1.4.1.3224.10.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Actions objects that describe what the firewall does to the traffic it receives. Permit allows the packet to pass the firewall. Deny blocks the packet from traversing the firewall. Tunnel encapsulates outgoing IP packets and decapsulates incoming IP packets.
| ||||
| CnsPlyNat | 1.3.6.1.4.1.3224.10.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current You can apply NAT at the interface level or at the policy level. With policy-based NAT, you can translate the source address on either incoming or outging network and VPN traffic. This object indicates if this is a policy-based NAT.
| ||||
| CnsPlyFixPort | 1.3.6.1.4.1.3224.10.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current When in policy-based NAT, the new secure address can come from either a Dynamic IP or from a Mapped IP. This object indicates if poliy-based NAT uses fix port when working on NAT mode.
| ||||
| CnsPlyDipId | 1.3.6.1.4.1.3224.10.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the Dynamic ID chosen for NAT policy. | ||||
| CnsPlyVpnTunnel | 1.3.6.1.4.1.3224.10.1.1.12 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current VPN tunnel this access policy applies to. | ||||
| CnsPlyL2tpTunnel | 1.3.6.1.4.1.3224.10.1.1.13 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current L2TP tunnel this access policy applies to. | ||||
| CnsPlyAuth | 1.3.6.1.4.1.3224.10.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the selecting this option requires the user at the source address to authenticate his/her identiry by supplying a user name and password before traffic is allowed to graverw the firewall or enter the VPN tunnel.
| ||||
| CnsPlyLogEnable | 1.3.6.1.4.1.3224.10.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current When you enable logging in an access policy, the NetScreen device logs all connections to which that paticular access policy applies.
| ||||
| CnsPlyCountEnable | 1.3.6.1.4.1.3224.10.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current When you enable counting in an access plicy, the NetScreen device counts the total number of bytes of traffic to which this access policy applies and records the informaiton in historical graphs.
| ||||
| CnsPlyAlarmBPS | 1.3.6.1.4.1.3224.10.1.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per second. | ||||
| CnsPlyAlarmBPM | 1.3.6.1.4.1.3224.10.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per Minute. | ||||
| CnsPlySchedule | 1.3.6.1.4.1.3224.10.1.1.19 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current By associating a schedule to an access policy, you can determine when the access policy is in effect. | ||||
| CnsPlyTrafficShapeEnable | 1.3.6.1.4.1.3224.10.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current User can set parameters for the control and shaping of traffic for each access policy.
| ||||
| CnsPlyTrafficPriority | 1.3.6.1.4.1.3224.10.1.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Traffic priority for this policy.
| ||||
| CnsPlyDSEnable | 1.3.6.1.4.1.3224.10.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Differentiated Services is a system for tagging traffic at a position within a hierarchy of priority.
| ||||
| CnsPlyActiveStatus | 1.3.6.1.4.1.3224.10.1.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Show the status of one policy entry.
| ||||
| CnsPlyName | 1.3.6.1.4.1.3224.10.1.1.24 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current policy name (optional) | ||||
| CnsPlyServiceName | 1.3.6.1.4.1.3224.10.1.1.25 | DisplayString | RO | |
column · DisplayString · read-only · current Sevices name that identify application protocols using layer 4 information such as standard and accepted TCP and UDP port numbers for application services like Telnet, FTP, SMTP and HTTP. This object indicates all the traffic service type this policy allows. 'Any' means all this policy allows all service go through. | ||||
| TnsPlyMonTable | 1.3.6.1.4.1.3224.10.2 | NA | ||
table · not-accessible · current traffic information for the policy-based traffic. | ||||
| RnsPlyMonEntry | 1.3.6.1.4.1.3224.10.2.1 | NA | ||
row · not-accessible · current An entry holds a set of traffic counters of a specific policy.
| ||||
| CnsPlyMonId | 1.3.6.1.4.1.3224.10.2.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Policy Id, also used as index in this table | ||||
| CnsPlyMonVsys | 1.3.6.1.4.1.3224.10.2.1.2 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current vsys this policy belongs to | ||||
| CnsPlyMonPackPerSec | 1.3.6.1.4.1.3224.10.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Packets go through this policy per second | ||||
| CnsPlyMonPackPerMin | 1.3.6.1.4.1.3224.10.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Packets go through this policy per minute | ||||
| CnsPlyMonTotalPacket | 1.3.6.1.4.1.3224.10.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current total packets go through this policy | ||||
| CnsPlyMonBytePerSec | 1.3.6.1.4.1.3224.10.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Bytes go through this policy per second | ||||
| CnsPlyMonBytePerMin | 1.3.6.1.4.1.3224.10.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Bytes go through this policy per minute | ||||
| CnsPlyMonTotalByte | 1.3.6.1.4.1.3224.10.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Total bytes go through this policy | ||||
| CnsPlyMonSessionPerSec | 1.3.6.1.4.1.3224.10.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Sessions go through this policy per second | ||||
| CnsPlyMonSessionPerMin | 1.3.6.1.4.1.3224.10.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Sessions go through this policy per minute | ||||
| CnsPlyMonTotalSession | 1.3.6.1.4.1.3224.10.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Total Sessions go through this policy | ||||