SchleifenbauerGenericMib
PDU5The SNMP MIB structure for the Schleifenbauer Products BV enterprise. Copyright (c) 2024 by Schleifenbauer Products BV
snmptranslate -m SchleifenbauerGenericMib -Tpsnmpwalk -v2c -c <community> -m SchleifenbauerGenericMib <host> 1.3.6.1.4.1.44568Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ischleifenbauer | 1.3.6.1.4.1.44568 | ||||||||||||||||||||
identity The SNMP MIB structure for the Schleifenbauer Products BV enterprise. Copyright (c) 2024 by Schleifenbauer Products BV | |||||||||||||||||||||
| Nenertree | 1.3.6.1.4.1.44568.1 | ||||||||||||||||||||
| Nnotifications | 1.3.6.1.4.1.44568.1.0 | ||||||||||||||||||||
| !systemStarted | 1.3.6.1.4.1.44568.1.0.1 | ||||||||||||||||||||
| !systemRebooted | 1.3.6.1.4.1.44568.1.0.2 | ||||||||||||||||||||
notification · current The system was reset. | |||||||||||||||||||||
| !restarted | 1.3.6.1.4.1.44568.1.0.3 | ||||||||||||||||||||
notification · current The software was reset. | |||||||||||||||||||||
| !userLogin | 1.3.6.1.4.1.44568.1.0.10 | ||||||||||||||||||||
notification · current A user logged in. | |||||||||||||||||||||
| !userLogout | 1.3.6.1.4.1.44568.1.0.11 | ||||||||||||||||||||
| !userAuthenticationFailure | 1.3.6.1.4.1.44568.1.0.12 | ||||||||||||||||||||
notification · current A user authentication attempt failed. | |||||||||||||||||||||
| !deviceConnectionConfigured | 1.3.6.1.4.1.44568.1.0.20 | ||||||||||||||||||||
notification · current A new device has been added. | |||||||||||||||||||||
| !deviceConnectionDeleted | 1.3.6.1.4.1.44568.1.0.21 | ||||||||||||||||||||
notification · current A new device deleted. | |||||||||||||||||||||
| !deviceStart | 1.3.6.1.4.1.44568.1.0.30 | ||||||||||||||||||||
notification · current A device connects.
| |||||||||||||||||||||
| !deviceReconnected | 1.3.6.1.4.1.44568.1.0.31 | ||||||||||||||||||||
notification · current A new device reconnects. | |||||||||||||||||||||
| !deviceDisconnected | 1.3.6.1.4.1.44568.1.0.32 | ||||||||||||||||||||
notification · current A device disconnects. | |||||||||||||||||||||
| !deviceError | 1.3.6.1.4.1.44568.1.0.33 | ||||||||||||||||||||
notification · current A new device error. | |||||||||||||||||||||
| !warningStartEvent | 1.3.6.1.4.1.44568.1.0.50 | ||||||||||||||||||||
notification · current Start warning state. | |||||||||||||||||||||
| !warningEndEvent | 1.3.6.1.4.1.44568.1.0.51 | ||||||||||||||||||||
notification · current End warning state. | |||||||||||||||||||||
| !criticalStartEvent | 1.3.6.1.4.1.44568.1.0.60 | ||||||||||||||||||||
notification · current Start critical state. | |||||||||||||||||||||
| !criticalEndEvent | 1.3.6.1.4.1.44568.1.0.61 | ||||||||||||||||||||
notification · current End of critical state. | |||||||||||||||||||||
| !digitalInputEvent | 1.3.6.1.4.1.44568.1.0.62 | ||||||||||||||||||||
notification · current Digital state change on/off. | |||||||||||||||||||||
| NenertreeObjects | 1.3.6.1.4.1.44568.1.1 | ||||||||||||||||||||
| NsystemStatus | 1.3.6.1.4.1.44568.1.1.1 | ||||||||||||||||||||
| SsystemStatusName | 1.3.6.1.4.1.44568.1.1.1.1 | DisplayString (SIZE (0..63)) | RO | Enertree | |||||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current The gateway name Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemStatusIp | 1.3.6.1.4.1.44568.1.1.1.2 | IpAddress | RO | 169.254.1.10 | |||||||||||||||||
scalar · IpAddress · read-only · current The gateway ip address Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemStatusId | 1.3.6.1.4.1.44568.1.1.1.3 | DisplayString (SIZE (0..63)) | RO | caf131fe | |||||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-only · current The gateway shepherd ID address Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceIdentification | 1.3.6.1.4.1.44568.1.1.2 | ||||||||||||||||||||
| TdeviceIdentificationTable | 1.3.6.1.4.1.44568.1.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current General identification parameters. | |||||||||||||||||||||
| RdeviceIdentificationEntry | 1.3.6.1.4.1.44568.1.1.2.1.1 | NA | |||||||||||||||||||
| CidentificationDeviceIndex | 1.3.6.1.4.1.44568.1.1.2.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CidDeviceName | 1.3.6.1.4.1.44568.1.1.2.1.1.2 | DisplayString (SIZE (0..63)) | RW | <private> | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current User configurable device name or identifier. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidDeviceLocation | 1.3.6.1.4.1.44568.1.1.2.1.1.3 | DisplayString (SIZE (0..63)) | RW | <private> | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current User configurable device location identifier. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidModuleType | 1.3.6.1.4.1.44568.1.1.2.1.1.4 | INTEGER | RO | controller-module(2) | |||||||||||||||||
column · INTEGER · read-only · current Device category: 0 = Daisychain Module, 1 = Gateway Module, 2 = Controller Module (SF also uses -1 to meaning no module!)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidProduct | 1.3.6.1.4.1.44568.1.1.2.1.1.5 | DisplayString (SIZE (0..15)) | RO | 1ABFDMN1323 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Product id Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidModuleFirmware | 1.3.6.1.4.1.44568.1.1.2.1.1.6 | DisplayString (SIZE (0..15)) | RO | 0.32.0 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Firmware version number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidMacAddress | 1.3.6.1.4.1.44568.1.1.2.1.1.7 | DisplayString (SIZE (0..18)) | RO | D0:22:12:B1:D0:C4 | |||||||||||||||||
column · DisplayString (SIZE (0..18)) · read-only · current MAC address. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidBirthday | 1.3.6.1.4.1.44568.1.1.2.1.1.8 | DisplayString (SIZE (0..15)) | RO | 200826 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Date Of Manufacture (DOM) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidModuleSerialNumber | 1.3.6.1.4.1.44568.1.1.2.1.1.9 | DisplayString (SIZE (0..15)) | RO | A0302070 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Module serial number Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidModulePartNo | 1.3.6.1.4.1.44568.1.1.2.1.1.10 | DisplayString (SIZE (0..15)) | RO | 155130 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Module part number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidSalesOrderNumber | 1.3.6.1.4.1.44568.1.1.2.1.1.11 | DisplayString (SIZE (0..15)) | RO | 2026-58494-1 | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Sales order number Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidSerialNumber | 1.3.6.1.4.1.44568.1.1.2.1.1.12 | DisplayString (SIZE (0..63)) | RO | 143980 | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Serial number Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidState | 1.3.6.1.4.1.44568.1.1.2.1.1.14 | DisplayString (SIZE (0..63)) | RO | RUNNING | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The device state info as string Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidVendor | 1.3.6.1.4.1.44568.1.1.2.1.1.15 | DisplayString (SIZE (0..63)) | RO | Schleifenbauer | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The device vendor name Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidId | 1.3.6.1.4.1.44568.1.1.2.1.1.16 | DisplayString (SIZE (0..63)) | RO | 2326c | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The device unique identifier Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidIpAddr | 1.3.6.1.4.1.44568.1.1.2.1.1.17 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The device IP Addr | |||||||||||||||||||||
| CidType | 1.3.6.1.4.1.44568.1.1.2.1.1.18 | DisplayString (SIZE (0..63)) | RO | PDU | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The device type. e.g. PDU, UPS, etc Example values from LibreNMS test devices
| |||||||||||||||||||||
| CidLastError | 1.3.6.1.4.1.44568.1.1.2.1.1.19 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The last error message | |||||||||||||||||||||
| NdeviceConfig | 1.3.6.1.4.1.44568.1.1.3 | ||||||||||||||||||||
| TdeviceConfigTable | 1.3.6.1.4.1.44568.1.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display device configuration. | |||||||||||||||||||||
| RdeviceConfigEntry | 1.3.6.1.4.1.44568.1.1.3.1.1 | NA | |||||||||||||||||||
| CconfigDeviceIndex | 1.3.6.1.4.1.44568.1.1.3.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CconfigMaximumLoad | 1.3.6.1.4.1.44568.1.1.3.1.1.2 | Integer32 | RO | 32 | |||||||||||||||||
column · Integer32 · read-only · current Maximum rated load of the device per phase (this value is also mentioned on the PDU profile), usually either 16A, 32A or 63A. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigCustomerName | 1.3.6.1.4.1.44568.1.1.3.1.1.3 | DisplayString (SIZE (0..63)) | RW | | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current Custom 64 character name field for the customer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigFormFactor | 1.3.6.1.4.1.44568.1.1.3.1.1.4 | DisplayString (SIZE (0..15)) | RO | D | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Formfactor of the device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigLength | 1.3.6.1.4.1.44568.1.1.3.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Length of the device in millimeter. | |||||||||||||||||||||
| CconfigNoBranches | 1.3.6.1.4.1.44568.1.1.3.1.1.6 | Integer32 | RO | 2 | |||||||||||||||||
column · Integer32 · read-only · current The number of branches available in the PDU, can be zero if no branches are available in the configuration. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNrOutlMeasured | 1.3.6.1.4.1.44568.1.1.3.1.1.7 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Number of measured outlets available in the PDU. If numbering of outlets used is non-contiguous: the highest outlet number is assumed as amount of measured outlets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNoNeutral | 1.3.6.1.4.1.44568.1.1.3.1.1.8 | INTEGER | RO | no-neutral-current-measurement(0) | |||||||||||||||||
column · INTEGER · read-only · current Use neutral current measurements if available: 0 = No neutral current measurement, 1 = Use neutral current measurement.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNrOutletsTotal | 1.3.6.1.4.1.44568.1.1.3.1.1.9 | Integer32 | RO | 6 | |||||||||||||||||
column · Integer32 · read-only · current Total number of outlets available in the PDU, including hardwired outlets without a switchmeasure module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNrPhases | 1.3.6.1.4.1.44568.1.1.3.1.1.10 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Total number of inputs: either zero (for no input metering), one or three for a single or three phase system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNrOutlSwitched | 1.3.6.1.4.1.44568.1.1.3.1.1.11 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Total number of switched outlets available. If the numbering of outlets used is non-contiguous: the highest outlet number is assumed as amount of switched outlets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigNoTotals | 1.3.6.1.4.1.44568.1.1.3.1.1.12 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The number of total calculations available in the PDU, this is usually one but can be more. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CconfigVoltRating | 1.3.6.1.4.1.44568.1.1.3.1.1.13 | DisplayString (SIZE (0..15)) | RO | 230V | |||||||||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Voltage rating in V for this PDU. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceSettings | 1.3.6.1.4.1.44568.1.1.4 | ||||||||||||||||||||
| TdeviceSettingsTable | 1.3.6.1.4.1.44568.1.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current device e.g. PDU settings. | |||||||||||||||||||||
| RdeviceSettingsEntry | 1.3.6.1.4.1.44568.1.1.4.1.1 | NA | |||||||||||||||||||
| CsettingsDeviceIndex | 1.3.6.1.4.1.44568.1.1.4.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CsetCurrentDropDetection | 1.3.6.1.4.1.44568.1.1.4.1.1.2 | INTEGER | RW | disabled(0) | |||||||||||||||||
column · INTEGER · read-write · current Enable or disable current drop detection (0 = disabled, 1 = enabled)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetFixedOutletDelay | 1.3.6.1.4.1.44568.1.1.4.1.1.3 | Integer32 | RW | 100 | |||||||||||||||||
column · Integer32 · read-write · current Minimal delay between relay switch requests in milliseconds. The minimum delay is 100ms.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetHighlight | 1.3.6.1.4.1.44568.1.1.4.1.1.4 | INTEGER | RW | disabled(0) | |||||||||||||||||
column · INTEGER · read-write · current Locate a unit. Set to '1' to switch on and to '0' to switch off this function.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetLedBrightness | 1.3.6.1.4.1.44568.1.1.4.1.1.5 | Integer32 | RW | 50 | |||||||||||||||||
column · Integer32 · read-write · current LED brightness setting for the light ring of a PDU
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetDisableOutletSwitching | 1.3.6.1.4.1.44568.1.1.4.1.1.6 | INTEGER | RW | disabled(0) | |||||||||||||||||
column · INTEGER · read-write · current Setting this will disable all means of switching an outlet; only the powerup modes and delays will be respected (0 = disabled, 1 = enabled).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetOutletPowerupMode | 1.3.6.1.4.1.44568.1.1.4.1.1.7 | INTEGER | RW | system-wide-and-individual-outlet-delay(2) | |||||||||||||||||
column · INTEGER · read-write · current Behaviour of outlets on power-up. 0 = off, 1 = same state as at power down use default switch delay, 2 = same state, but delayed by individual delay timer, 3 = Outlets will always stay on (even at power down!)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetSensorChangeAlertMode | 1.3.6.1.4.1.44568.1.1.4.1.1.8 | INTEGER | RW | disabled(0) | |||||||||||||||||
column · INTEGER · read-write · current Enables the sensor channel change detection. 0 = off (default), 1 = on
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsetConfigUsbMode | 1.3.6.1.4.1.44568.1.1.4.1.1.9 | INTEGER | RW | enabled(1) | |||||||||||||||||
column · INTEGER · read-write · current USB Mode. 0 = Disabled, 1 = Enabled
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceDaisychain | 1.3.6.1.4.1.44568.1.1.5 | ||||||||||||||||||||
| TdeviceDaisychainTable | 1.3.6.1.4.1.44568.1.1.5.1 | NA | |||||||||||||||||||
table · not-accessible · current device e.g. daisychain values. | |||||||||||||||||||||
| RdeviceDaisychainEntry | 1.3.6.1.4.1.44568.1.1.5.1.1 | NA | |||||||||||||||||||
| CdaisychainDeviceIndex | 1.3.6.1.4.1.44568.1.1.5.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CdChainBreakLocation | 1.3.6.1.4.1.44568.1.1.5.1.1.2 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Device index of the ring break location. Can be used to determine between which devices the ring is broken.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdChainBusStatus | 1.3.6.1.4.1.44568.1.1.5.1.1.3 | INTEGER | RO | closed(1) | |||||||||||||||||
column · INTEGER · read-only · current SPBUS network architecture configuration. 0 = open ring network, 1 = closed ring network
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdChainNrUnitsFound | 1.3.6.1.4.1.44568.1.1.5.1.1.4 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Result of scan command, denotes the number of devices on the SPBUS network.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdChainUnitList | 1.3.6.1.4.1.44568.1.1.5.1.1.5 | DisplayString (SIZE (0..255)) | RO | 2326c | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current List of unit addresses known to the device. Position ordered list of assigned unit addresses.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceReset | 1.3.6.1.4.1.44568.1.1.6 | ||||||||||||||||||||
| TdeviceResetTable | 1.3.6.1.4.1.44568.1.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current device e.g. PDU reset values. | |||||||||||||||||||||
| RdeviceResetEntry | 1.3.6.1.4.1.44568.1.1.6.1.1 | NA | |||||||||||||||||||
| CresetDeviceIndex | 1.3.6.1.4.1.44568.1.1.6.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CresetRestart | 1.3.6.1.4.1.44568.1.1.6.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Writing '1' to this register will invoke a warm restart of the device. Note that this will have no effect on outlet status!
| |||||||||||||||||||||
| NdeviceInputs | 1.3.6.1.4.1.44568.1.1.7 | ||||||||||||||||||||
| TdeviceInputsTable | 1.3.6.1.4.1.44568.1.1.7.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Input. | |||||||||||||||||||||
| RdeviceInputsEntry | 1.3.6.1.4.1.44568.1.1.7.1.1 | NA | |||||||||||||||||||
| CinputDeviceIndex | 1.3.6.1.4.1.44568.1.1.7.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CinputIndex | 1.3.6.1.4.1.44568.1.1.7.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current Index of inputs. | |||||||||||||||||||||
| CinputName | 1.3.6.1.4.1.44568.1.1.7.1.1.3 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current User configurable 64 character naming of the inputs or phases. | |||||||||||||||||||||
| CinputEnergyTotal | 1.3.6.1.4.1.44568.1.1.7.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement. This value is not resetable.
| |||||||||||||||||||||
| CinputEnergySubtotal | 1.3.6.1.4.1.44568.1.1.7.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement.
| |||||||||||||||||||||
| CinputActivePower | 1.3.6.1.4.1.44568.1.1.7.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Input power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of a phase.
| |||||||||||||||||||||
| CinputApparentPower | 1.3.6.1.4.1.44568.1.1.7.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Input VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of a phase.
| |||||||||||||||||||||
| CinputReactivePower | 1.3.6.1.4.1.44568.1.1.7.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
| |||||||||||||||||||||
| CinputPowerFactor | 1.3.6.1.4.1.44568.1.1.7.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The effective power factor for each input 100x.
| |||||||||||||||||||||
| CinputActualCurrent | 1.3.6.1.4.1.44568.1.1.7.1.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Actual apparent, RMS current of an input 100x.
| |||||||||||||||||||||
| CinputActualVoltage | 1.3.6.1.4.1.44568.1.1.7.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual voltage per input 100x.
| |||||||||||||||||||||
| CinputFrequency | 1.3.6.1.4.1.44568.1.1.7.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Frequency in Hz per input 100x.
| |||||||||||||||||||||
| CinputApparentEnergy | 1.3.6.1.4.1.44568.1.1.7.1.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The apparent accumulated energy VAh of each phase 100x.
| |||||||||||||||||||||
| CinputCrestFactor | 1.3.6.1.4.1.44568.1.1.7.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The crest factor per input 100x. the ratio of peak values to the effective value.
| |||||||||||||||||||||
| CinputPeakCurrent | 1.3.6.1.4.1.44568.1.1.7.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Highest current rms value since last reset (100x).
| |||||||||||||||||||||
| CinputMaxRatedAmps | 1.3.6.1.4.1.44568.1.1.7.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Maximum rated current in A per input.
| |||||||||||||||||||||
| CinputThd | 1.3.6.1.4.1.44568.1.1.7.1.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total harmonic distortion in percent per phase 100x.
| |||||||||||||||||||||
| CinputType | 1.3.6.1.4.1.44568.1.1.7.1.1.18 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Type of input.
| |||||||||||||||||||||
| CinputMinVoltage | 1.3.6.1.4.1.44568.1.1.7.1.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current RMS voltage dip; lowest value since reset of dips.
| |||||||||||||||||||||
| CinputMaxVoltage | 1.3.6.1.4.1.44568.1.1.7.1.1.20 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current RMS voltage peak; highest value since reset of peaks.
| |||||||||||||||||||||
| CinputPhase | 1.3.6.1.4.1.44568.1.1.7.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A mapping to which phase each input is connected to. | |||||||||||||||||||||
| CinputStatusUnbalanced | 1.3.6.1.4.1.44568.1.1.7.1.1.22 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The input unbalanced. 100x.
| |||||||||||||||||||||
| CinputPeakPower | 1.3.6.1.4.1.44568.1.1.7.1.1.23 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Peak input power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of a phase. Can be reset after reboot.
| |||||||||||||||||||||
| CinputPeakCurrentTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.24 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp (seconds since epoch) of the most recent update to inputPeakCurrent for this input phase. Value is 0 if no peak has been recorded since last reset.
| |||||||||||||||||||||
| CinputMaxVoltageTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent inputMaxVoltage registration.
| |||||||||||||||||||||
| CinputMinVoltageTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent inputMinVoltage registration.
| |||||||||||||||||||||
| CinputPeakCrestFactor | 1.3.6.1.4.1.44568.1.1.7.1.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Highest crest factor value (100x) observed on this input since last reset.
| |||||||||||||||||||||
| CinputPeakCrestFactorTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.28 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent inputPeakCrestFactor registration.
| |||||||||||||||||||||
| CinputEnergySubtotalResetTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.29 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the last reset of inputEnergySubtotal.
| |||||||||||||||||||||
| CinputResetPeaks | 1.3.6.1.4.1.44568.1.1.7.1.1.30 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Write 1 to reset peak and min/max statistics. Note: triggers device-wide reset of all peak values across inputs, outlets, branches and totals.
| |||||||||||||||||||||
| CinputResidualAcCurrent | 1.3.6.1.4.1.44568.1.1.7.1.1.31 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current AC residual current measurement on this input, in units of milliamps (e.g., value 42 = 42 mA). Per-input equivalent of totalResidualAcCurrentmA.
| |||||||||||||||||||||
| CinputResidualDcCurrent | 1.3.6.1.4.1.44568.1.1.7.1.1.32 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current DC residual current measurement on this input, in units of milliamps (e.g., value 42 = 42 mA). Per-input equivalent of totalResidualDcCurrentmA.
| |||||||||||||||||||||
| CinputResidualCurrent | 1.3.6.1.4.1.44568.1.1.7.1.1.33 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Residual current measurement on this input, in units of milliamps (e.g., value 42 = 42 mA). Per-input equivalent of totalResidualCurrentmA.
| |||||||||||||||||||||
| CinputResidualPeak | 1.3.6.1.4.1.44568.1.1.7.1.1.34 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Peak residual current on this input, in units of milliamps (e.g., value 42 = 42 mA). Per-input equivalent of totalResidualPeakmA.
| |||||||||||||||||||||
| CinputResidualPeakTimestamp | 1.3.6.1.4.1.44568.1.1.7.1.1.35 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp (seconds since 1970-01-01 UTC) at which inputResidualPeak was recorded. 0 if no peak has been recorded since last reset. Per-input equivalent of totalResidualPeakmA timestamp.
| |||||||||||||||||||||
| NdeviceOutlets | 1.3.6.1.4.1.44568.1.1.8 | ||||||||||||||||||||
| TdeviceOutletsTable | 1.3.6.1.4.1.44568.1.1.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Outlet. | |||||||||||||||||||||
| RdeviceOutletsEntry | 1.3.6.1.4.1.44568.1.1.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list to display status of Outlet.
| |||||||||||||||||||||
| CoutletDeviceIndex | 1.3.6.1.4.1.44568.1.1.8.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CoutletIndex | 1.3.6.1.4.1.44568.1.1.8.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current An outlet index in pdu. | |||||||||||||||||||||
| CoutletName | 1.3.6.1.4.1.44568.1.1.8.1.1.3 | DisplayString (SIZE (0..63)) | RW | Outlet # 1 | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current User configurable naming of individual outlets. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletEnergyTotal | 1.3.6.1.4.1.44568.1.1.8.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total kWh of selected outlet. This value is not resetable.
| |||||||||||||||||||||
| CoutletEnergySubtotal | 1.3.6.1.4.1.44568.1.1.8.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current kWh subtotal register of selected output.
| |||||||||||||||||||||
| CoutletActivePower | 1.3.6.1.4.1.44568.1.1.8.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Output power (in W), MEASURED by the device x100 using current, voltage, and power factor measurements of an outlet.
| |||||||||||||||||||||
| CoutletApparentPower | 1.3.6.1.4.1.44568.1.1.8.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Output VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of an outlet.
| |||||||||||||||||||||
| CoutletReactivePower | 1.3.6.1.4.1.44568.1.1.8.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
| |||||||||||||||||||||
| CoutletPowerFactor | 1.3.6.1.4.1.44568.1.1.8.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Power factor x100 per outlet.
| |||||||||||||||||||||
| CoutletActualCurrent | 1.3.6.1.4.1.44568.1.1.8.1.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Actual apparent 100x, RMS current per outlet.
| |||||||||||||||||||||
| CoutletActualVoltage | 1.3.6.1.4.1.44568.1.1.8.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Actual voltage on outlet 100x.
| |||||||||||||||||||||
| CoutletType | 1.3.6.1.4.1.44568.1.1.8.1.1.12 | INTEGER | RO | schuko(16) | |||||||||||||||||
column · INTEGER · read-only · current Outlet types: 0: Unknown, 1: BS, 2: C13, 3: C13 IEC Lock, 4: C19, 5: C19 IEC Lock, 6: CEE 16A 1 phase, 7: CEE 16A 3 phase, 8: CEE 32A 1 phase, 9: CEE 32A 3 phase, 10: CEE 63A 1 phase, 11: CEE 63A 3 phase, 12: COMBI IEC Lock, 13: GST 155, 14: GST 183, 15: GST 185, 16: Schuko, 17: T13, 18: T23, 19: UTE.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletPhase | 1.3.6.1.4.1.44568.1.1.8.1.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A mapping to which input each outlet is connected to. | |||||||||||||||||||||
| CoutletCurrentState | 1.3.6.1.4.1.44568.1.1.8.1.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The state of the outlet relay(s).
| |||||||||||||||||||||
| CoutletApparentEnergy | 1.3.6.1.4.1.44568.1.1.8.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The apparent accumulated energy VAh of each outlet 100x.
| |||||||||||||||||||||
| CoutletCrestFactor | 1.3.6.1.4.1.44568.1.1.8.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The crest factor per outlet 100x. the ratio of peak values to the effective value.
| |||||||||||||||||||||
| CoutletPeakCurrent | 1.3.6.1.4.1.44568.1.1.8.1.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Highest current rms value since last reset (100x).
| |||||||||||||||||||||
| CoutletMaxRatedAmps | 1.3.6.1.4.1.44568.1.1.8.1.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Outlet maximum rated current in A.
| |||||||||||||||||||||
| CoutletThd | 1.3.6.1.4.1.44568.1.1.8.1.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total harmonic distortion per outlet 100x.
| |||||||||||||||||||||
| CoutletPowerCycle | 1.3.6.1.4.1.44568.1.1.8.1.1.20 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Writing '1' will cause the outlet to power cycle.
| |||||||||||||||||||||
| CoutletPowerCycleDelay | 1.3.6.1.4.1.44568.1.1.8.1.1.21 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Outlet individual power cycle timer. This is the amount, in seconds.
| |||||||||||||||||||||
| CoutletSwitchDelay | 1.3.6.1.4.1.44568.1.1.8.1.1.22 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Delay before an individual outlet's relay switches on at power-up, in seconds.
| |||||||||||||||||||||
| CoutletBranch | 1.3.6.1.4.1.44568.1.1.8.1.1.23 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current A mapping to which branch each outlet is connected to.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletPeakPower | 1.3.6.1.4.1.44568.1.1.8.1.1.24 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Peak output power (in W), MEASURED by the device x100 using current, voltage, and power factor measurements of an outlet. Can reset after a reboot.
| |||||||||||||||||||||
| CoutletPeakCurrentTimestamp | 1.3.6.1.4.1.44568.1.1.8.1.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent update to outletPeakCurrent.
| |||||||||||||||||||||
| CoutletPeakCrestFactor | 1.3.6.1.4.1.44568.1.1.8.1.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Highest crest factor value (100x) observed on this outlet since last reset.
| |||||||||||||||||||||
| CoutletPeakCrestFactorTimestamp | 1.3.6.1.4.1.44568.1.1.8.1.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent outletPeakCrestFactor registration.
| |||||||||||||||||||||
| CoutletEnergySubtotalResetTimestamp | 1.3.6.1.4.1.44568.1.1.8.1.1.28 | Integer32 | RO | 1789396161 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the last reset of outletEnergySubtotal.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletResetPeaks | 1.3.6.1.4.1.44568.1.1.8.1.1.33 | Integer32 | RC | 0 | |||||||||||||||||
column · Integer32 · read-create · current Write 1 to reset peak and min/max statistics. Note: triggers device-wide reset of all peak values.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceBranches | 1.3.6.1.4.1.44568.1.1.9 | ||||||||||||||||||||
| TdeviceBranchesTable | 1.3.6.1.4.1.44568.1.1.9.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Branch. | |||||||||||||||||||||
| RdeviceBranchesEntry | 1.3.6.1.4.1.44568.1.1.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list to display status of Outlet.
| |||||||||||||||||||||
| CbranchDeviceIndex | 1.3.6.1.4.1.44568.1.1.9.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CbranchIndex | 1.3.6.1.4.1.44568.1.1.9.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A branch index in pdu. | |||||||||||||||||||||
| CbranchName | 1.3.6.1.4.1.44568.1.1.9.1.1.3 | DisplayString (SIZE (0..63)) | RW | BR1 | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current User configurable naming of a branch in 64 characters per branch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchEnergyTotal | 1.3.6.1.4.1.44568.1.1.9.1.1.4 | Integer32 | RO | 212 | |||||||||||||||||
column · Integer32 · read-only · current Branch energy total measurement in kWh. This value is not resetable. 24-bit little-endian integer.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchEnergySubtotal | 1.3.6.1.4.1.44568.1.1.9.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Branch energy subtotal measurement in kWh. Reset to zero with [rsbmks]. 24-bit little-endian integer.
| |||||||||||||||||||||
| CbranchActivePower | 1.3.6.1.4.1.44568.1.1.9.1.1.6 | Integer32 | RO | 91948 | |||||||||||||||||
column · Integer32 · read-only · current Branch power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of an branch.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchApparentPower | 1.3.6.1.4.1.44568.1.1.9.1.1.7 | Integer32 | RO | 95857 | |||||||||||||||||
column · Integer32 · read-only · current Branch VA (volt-amps) 100x, MEASURED by the device using current and voltage measurements of an branch.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchReactivePower | 1.3.6.1.4.1.44568.1.1.9.1.1.8 | Integer32 | RO | -27094 | |||||||||||||||||
column · Integer32 · read-only · current Reactive power (volt-amps reactive, in VAR) of a branch x100, MEASURED by the device.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPowerFactor | 1.3.6.1.4.1.44568.1.1.9.1.1.9 | Integer32 | RO | 95 | |||||||||||||||||
column · Integer32 · read-only · current The effective power factor per branch 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchActualCurrent | 1.3.6.1.4.1.44568.1.1.9.1.1.10 | Integer32 | RO | 418 | |||||||||||||||||
column · Integer32 · read-only · current Actual apparent 100x, RMS current of a branch.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchActualVoltage | 1.3.6.1.4.1.44568.1.1.9.1.1.11 | Integer32 | RO | 22903 | |||||||||||||||||
column · Integer32 · read-only · current The actual voltage per branch x100.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchType | 1.3.6.1.4.1.44568.1.1.9.1.1.12 | DisplayString (SIZE (0..63)) | RO | BRANCH | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current Breaker type: 0: Unknown, 1: ETA (thermal, resettable), 2: HYMA (hydraulic magnetic), 3: MCB (thermal magnetic DIN), 4: MELT (small ceramic fuse), 5: REVOLVER (large ceramic fuse, DIN holder).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPhase | 1.3.6.1.4.1.44568.1.1.9.1.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A mapping to which phase (input) each branch is connected to. | |||||||||||||||||||||
| CbranchState | 1.3.6.1.4.1.44568.1.1.9.1.1.14 | INTEGER | RO | ok(0) | |||||||||||||||||
column · INTEGER · read-only · current Power state of the branch, usable for determining if a branch is currently tripped. 0 = OK, 1 = Tripped.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchApparentEnergy | 1.3.6.1.4.1.44568.1.1.9.1.1.15 | Integer32 | RO | 249 | |||||||||||||||||
column · Integer32 · read-only · current The apparent accumulated energy VAh of each branch. 100x
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchCrestFactor | 1.3.6.1.4.1.44568.1.1.9.1.1.16 | Integer32 | RO | 1016 | |||||||||||||||||
column · Integer32 · read-only · current The crest factor per branch 100x. the ratio of peak values to the effective value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPeakCurrent | 1.3.6.1.4.1.44568.1.1.9.1.1.17 | Integer32 | RO | 563 | |||||||||||||||||
column · Integer32 · read-only · current Highest current rms value since last reset (100x).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchMaxRatedAmps | 1.3.6.1.4.1.44568.1.1.9.1.1.18 | Integer32 | RO | 16 | |||||||||||||||||
column · Integer32 · read-only · current Maximum rated current in A per branch (representing the breakerfuse value).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchThd | 1.3.6.1.4.1.44568.1.1.9.1.1.19 | Integer32 | RO | 900 | |||||||||||||||||
column · Integer32 · read-only · current Total harmonic distortion in percent per branch x100.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchMinVoltage | 1.3.6.1.4.1.44568.1.1.9.1.1.20 | Integer32 | RO | 22871 | |||||||||||||||||
column · Integer32 · read-only · current RMS voltage dip per branch; lowest value since reset of dips.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchMaxVoltage | 1.3.6.1.4.1.44568.1.1.9.1.1.21 | Integer32 | RO | 22971 | |||||||||||||||||
column · Integer32 · read-only · current RMS voltage peak per branch; highest value since reset of peaks.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchFrequency | 1.3.6.1.4.1.44568.1.1.9.1.1.22 | Integer32 | RO | 4997 | |||||||||||||||||
column · Integer32 · read-only · current Frequency in Hz per branch 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPeakPower | 1.3.6.1.4.1.44568.1.1.9.1.1.23 | Integer32 | RO | 126014 | |||||||||||||||||
column · Integer32 · read-only · current Peak branch power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of an branch. Can be reset after reboot.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPeakCurrentTimestamp | 1.3.6.1.4.1.44568.1.1.9.1.1.24 | Integer32 | RO | 1790239171 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent update to branchPeakCurrent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchMinVoltageTimestamp | 1.3.6.1.4.1.44568.1.1.9.1.1.25 | Integer32 | RO | 1790239171 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent branchMinVoltage registration.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchMaxVoltageTimestamp | 1.3.6.1.4.1.44568.1.1.9.1.1.26 | Integer32 | RO | 1790239171 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent branchMaxVoltage registration.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPeakCrestFactor | 1.3.6.1.4.1.44568.1.1.9.1.1.27 | Integer32 | RO | 1016 | |||||||||||||||||
column · Integer32 · read-only · current Highest crest factor value (100x) observed on this branch since last reset.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchPeakCrestFactorTimestamp | 1.3.6.1.4.1.44568.1.1.9.1.1.28 | Integer32 | RO | 1790239171 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the most recent branchPeakCrestFactor registration.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchEnergySubtotalResetTimestamp | 1.3.6.1.4.1.44568.1.1.9.1.1.29 | Integer32 | RO | 1789396161 | |||||||||||||||||
column · Integer32 · read-only · current Unix timestamp of the last reset of branchEnergySubtotal.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbranchResetPeaks | 1.3.6.1.4.1.44568.1.1.9.1.1.30 | Integer32 | RC | 0 | |||||||||||||||||
column · Integer32 · read-create · current Write 1 to reset peak and min/max statistics. Note: triggers device-wide reset of all peak values.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceTotals | 1.3.6.1.4.1.44568.1.1.10 | ||||||||||||||||||||
| TdeviceTotalsTable | 1.3.6.1.4.1.44568.1.1.10.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of totals. | |||||||||||||||||||||
| RdeviceTotalsEntry | 1.3.6.1.4.1.44568.1.1.10.1.1 | NA | |||||||||||||||||||
| CtotalDeviceIndex | 1.3.6.1.4.1.44568.1.1.10.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CtotalIndex | 1.3.6.1.4.1.44568.1.1.10.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A total index in pdu. | |||||||||||||||||||||
| CtotalEnergy | 1.3.6.1.4.1.44568.1.1.10.1.1.3 | Integer32 | RO | 211810 | |||||||||||||||||
column · Integer32 · read-only · current Total energy measurement in kWh. This value is not resetable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalActivePower | 1.3.6.1.4.1.44568.1.1.10.1.1.4 | Integer32 | RO | 919480 | |||||||||||||||||
column · Integer32 · read-only · current Totals power (in W) 100x, sum of phases.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalApparentPower | 1.3.6.1.4.1.44568.1.1.10.1.1.5 | Integer32 | RO | 958570 | |||||||||||||||||
column · Integer32 · read-only · current Totals VA (volt-amps, in VA) 100x, sum of phases.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalReactivePower | 1.3.6.1.4.1.44568.1.1.10.1.1.6 | Integer32 | RO | -270940 | |||||||||||||||||
column · Integer32 · read-only · current Totals reactive power (volt-amps reactive, in VAR) 100x, sum of phases.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalActualCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.7 | Integer32 | RO | 4180 | |||||||||||||||||
column · Integer32 · read-only · current System total actual apparent 100x, RMS current.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalApparentEnergy | 1.3.6.1.4.1.44568.1.1.10.1.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The total apparent energy in VAh 100x. This value is not resetable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalPeakCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.9 | Integer32 | RO | 5630 | |||||||||||||||||
column · Integer32 · read-only · current Highest current rms value since last reset (100x).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalNeutralPeak | 1.3.6.1.4.1.44568.1.1.10.1.1.10 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Peak neutral current 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalNeutralCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.11 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Neutral current measurement 100x. This is the sum of the neutral measurents channels: (only in three phase configs, one channel for all except 63A, then there will be two).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalOvervoltageProtect | 1.3.6.1.4.1.44568.1.1.10.1.1.12 | INTEGER | RO | ok(0) | |||||||||||||||||
column · INTEGER · read-only · current Overvoltage protection module measurement (0 = OK, 1 = Overvoltage detected).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualAcCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.13 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current AC residual current measurement 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualPeak | 1.3.6.1.4.1.44568.1.1.10.1.1.14 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Peak residual current 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.15 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Residual current measurement 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualDcCurrent | 1.3.6.1.4.1.44568.1.1.10.1.1.16 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current DC residual current measurement 100x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalPeakPower | 1.3.6.1.4.1.44568.1.1.10.1.1.17 | Integer32 | RO | 1260140 | |||||||||||||||||
column · Integer32 · read-only · current Peak totals power (in W) 100x, sum of phases. Can be reset after reboot
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualAcCurrentmA | 1.3.6.1.4.1.44568.1.1.10.1.1.18 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current AC residual current measurement in milliamps 10x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualPeakmA | 1.3.6.1.4.1.44568.1.1.10.1.1.19 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Peak residual current measurement in milliamps 10x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualCurrentmA | 1.3.6.1.4.1.44568.1.1.10.1.1.20 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Residual current measurement in milliamps 10x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalResidualDcCurrentmA | 1.3.6.1.4.1.44568.1.1.10.1.1.21 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current DC residual current measurement in milliamps 10x.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalActualVoltage | 1.3.6.1.4.1.44568.1.1.10.1.1.22 | Integer32 | RO | 22924 | |||||||||||||||||
column · Integer32 · read-only · current Total actual voltage measurement 100x. For single-phase PDUs, this is the inlet voltage. For multi-phase PDUs, this is the average of all phase voltages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtotalFrequency | 1.3.6.1.4.1.44568.1.1.10.1.1.23 | Integer32 | RO | 4997 | |||||||||||||||||
column · Integer32 · read-only · current Total line frequency measurement 100x. For single-phase PDUs, this is the inlet frequency. For multi-phase PDUs, this is the average of all phase frequencies.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdeviceSensors | 1.3.6.1.4.1.44568.1.1.11 | ||||||||||||||||||||
| TdeviceSensorsTable | 1.3.6.1.4.1.44568.1.1.11.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Sensors. | |||||||||||||||||||||
| RdeviceSensorsEntry | 1.3.6.1.4.1.44568.1.1.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list to display status of Sensor.
| |||||||||||||||||||||
| CsensorDeviceIndex | 1.3.6.1.4.1.44568.1.1.11.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CsensorIndex | 1.3.6.1.4.1.44568.1.1.11.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A port index in pdu. | |||||||||||||||||||||
| CsensorName | 1.3.6.1.4.1.44568.1.1.11.1.1.3 | DisplayString (SIZE (0..36)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..36)) · read-write · current The sensor port name. | |||||||||||||||||||||
| CsensorValue | 1.3.6.1.4.1.44568.1.1.11.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The sensor value 10x. E.g. a temperature of 25.7 C is passed as 257.
| |||||||||||||||||||||
| CsensorType | 1.3.6.1.4.1.44568.1.1.11.1.1.5 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The sensor type string. | |||||||||||||||||||||
| CsensorSerialNumber | 1.3.6.1.4.1.44568.1.1.11.1.1.6 | DisplayString (SIZE (0..8)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current Serial number of the sensor. | |||||||||||||||||||||
| CsensorSource | 1.3.6.1.4.1.44568.1.1.11.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Source of the sensor.
| |||||||||||||||||||||
| CsensorState | 1.3.6.1.4.1.44568.1.1.11.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current State of the sensor.
| |||||||||||||||||||||
| CsensorUnit | 1.3.6.1.4.1.44568.1.1.11.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Sensor measurement unit. | |||||||||||||||||||||
| NdeviceDigitalInputs | 1.3.6.1.4.1.44568.1.1.40 | ||||||||||||||||||||
| TdeviceDigitalInputsTable | 1.3.6.1.4.1.44568.1.1.40.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Digital Input. | |||||||||||||||||||||
| RdeviceDigitalInputsEntry | 1.3.6.1.4.1.44568.1.1.40.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list to display status of Digital Input. | |||||||||||||||||||||
| CdigitalInputDeviceIndex | 1.3.6.1.4.1.44568.1.1.40.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CdigitalInputIndex | 1.3.6.1.4.1.44568.1.1.40.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A port index in pdu. | |||||||||||||||||||||
| CdigitalInputName | 1.3.6.1.4.1.44568.1.1.40.1.1.3 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current The digital input name. | |||||||||||||||||||||
| CdigitalInputSerialNumber | 1.3.6.1.4.1.44568.1.1.40.1.1.6 | DisplayString (SIZE (0..8)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current Serial number of the digital input. | |||||||||||||||||||||
| CdigitalInputSource | 1.3.6.1.4.1.44568.1.1.40.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Source of the digital input.
| |||||||||||||||||||||
| CdigitalInputState | 1.3.6.1.4.1.44568.1.1.40.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current State of the digital input.
| |||||||||||||||||||||
| CdigitalInputValue | 1.3.6.1.4.1.44568.1.1.40.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The digital input state
| |||||||||||||||||||||
| NdeviceDigitalOutputs | 1.3.6.1.4.1.44568.1.1.50 | ||||||||||||||||||||
| TdeviceDigitalOutputsTable | 1.3.6.1.4.1.44568.1.1.50.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Digital Output. | |||||||||||||||||||||
| RdeviceDigitalOutputsEntry | 1.3.6.1.4.1.44568.1.1.50.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A list to display status of Digital Output. | |||||||||||||||||||||
| CdigitalOutputDeviceIndex | 1.3.6.1.4.1.44568.1.1.50.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CdigitalOutputIndex | 1.3.6.1.4.1.44568.1.1.50.1.1.2 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current Digital Output index in pdu. | |||||||||||||||||||||
| CdigitalOutputName | 1.3.6.1.4.1.44568.1.1.50.1.1.3 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current The digital output port name. | |||||||||||||||||||||
| CdigitalOutputSerialNumber | 1.3.6.1.4.1.44568.1.1.50.1.1.6 | DisplayString (SIZE (0..8)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current Serial number of the digital output. | |||||||||||||||||||||
| CdigitalOutputSource | 1.3.6.1.4.1.44568.1.1.50.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Source of the digital output.
| |||||||||||||||||||||
| CdigitalOutputState | 1.3.6.1.4.1.44568.1.1.50.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current State of the digital output.
| |||||||||||||||||||||
| CdigitalOutputValue | 1.3.6.1.4.1.44568.1.1.50.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The digital outlet switch state.
| |||||||||||||||||||||
| NdcStatus | 1.3.6.1.4.1.44568.1.1.100 | ||||||||||||||||||||
| TdcStatusTable | 1.3.6.1.4.1.44568.1.1.100.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of Data center. | |||||||||||||||||||||
| RdcStatusEntry | 1.3.6.1.4.1.44568.1.1.100.1.1 | NA | |||||||||||||||||||
| CdcStatusIndex | 1.3.6.1.4.1.44568.1.1.100.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CdcStatusName | 1.3.6.1.4.1.44568.1.1.100.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter name | |||||||||||||||||||||
| CdcStatusState | 1.3.6.1.4.1.44568.1.1.100.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter state .e.g normal, etc. | |||||||||||||||||||||
| CdcStatusKwhTotal | 1.3.6.1.4.1.44568.1.1.100.1.1.4 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center KWhTotal.
| |||||||||||||||||||||
| CdcStatusPowerWatts | 1.3.6.1.4.1.44568.1.1.100.1.1.5 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The datacenter power Watt. 100x.
| |||||||||||||||||||||
| CdcStatusPowerVA | 1.3.6.1.4.1.44568.1.1.100.1.1.6 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The daracenter power VA. 100x.
| |||||||||||||||||||||
| CdcStatusCurrent | 1.3.6.1.4.1.44568.1.1.100.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center current. 100x.
| |||||||||||||||||||||
| CdcStatusVoltage | 1.3.6.1.4.1.44568.1.1.100.1.1.8 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center Voltage. 100x.
| |||||||||||||||||||||
| CdcStatusTemp | 1.3.6.1.4.1.44568.1.1.100.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The temperature. 10x.
| |||||||||||||||||||||
| CdcStatusHumidity | 1.3.6.1.4.1.44568.1.1.100.1.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The humidity. 10x.
| |||||||||||||||||||||
| CdcStatusRcmCurrent | 1.3.6.1.4.1.44568.1.1.100.1.1.11 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current in mA | |||||||||||||||||||||
| CdcStatusRcmCurrentAc | 1.3.6.1.4.1.44568.1.1.100.1.1.12 | Integer32 (0..512) | RO | ||||||||||||||||||
column · Integer32 (0..512) · read-only · current The residual current AC component in mA | |||||||||||||||||||||
| CdcStatusRcmCurrentDc | 1.3.6.1.4.1.44568.1.1.100.1.1.13 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current DC component in mA | |||||||||||||||||||||
| CdcStatusL1 | 1.3.6.1.4.1.44568.1.1.100.1.1.14 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center L1current. 100x.
| |||||||||||||||||||||
| CdcStatusL2 | 1.3.6.1.4.1.44568.1.1.100.1.1.15 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center L2 current. 100x.
| |||||||||||||||||||||
| CdcStatusL3 | 1.3.6.1.4.1.44568.1.1.100.1.1.16 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The data center L3 current. 100x.
| |||||||||||||||||||||
| NroomStatus | 1.3.6.1.4.1.44568.1.1.110 | ||||||||||||||||||||
| TroomStatusTable | 1.3.6.1.4.1.44568.1.1.110.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of rooms. | |||||||||||||||||||||
| RroomStatusEntry | 1.3.6.1.4.1.44568.1.1.110.1.1 | NA | |||||||||||||||||||
| CroomStatusIndex | 1.3.6.1.4.1.44568.1.1.110.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CroomStatusName | 1.3.6.1.4.1.44568.1.1.110.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The room name | |||||||||||||||||||||
| CroomStatusState | 1.3.6.1.4.1.44568.1.1.110.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The room statee.g. normal, degraded | |||||||||||||||||||||
| CroomDcStatusName | 1.3.6.1.4.1.44568.1.1.110.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter name in which this room is | |||||||||||||||||||||
| CroomStatusKwhTotal | 1.3.6.1.4.1.44568.1.1.110.1.1.5 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room KWhTotal.
| |||||||||||||||||||||
| CroomStatusPowerWatts | 1.3.6.1.4.1.44568.1.1.110.1.1.6 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room power Watt. 100x.
| |||||||||||||||||||||
| CroomStatusPowerVA | 1.3.6.1.4.1.44568.1.1.110.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room power VA. 100x.
| |||||||||||||||||||||
| CroomStatusCurrent | 1.3.6.1.4.1.44568.1.1.110.1.1.8 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room current. 100x.
| |||||||||||||||||||||
| CroomStatusVoltage | 1.3.6.1.4.1.44568.1.1.110.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room Voltage. 100x.
| |||||||||||||||||||||
| CroomStatusTemp | 1.3.6.1.4.1.44568.1.1.110.1.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The temperature. 10x.
| |||||||||||||||||||||
| CroomStatusHumidity | 1.3.6.1.4.1.44568.1.1.110.1.1.11 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The humidity. 10x.
| |||||||||||||||||||||
| CroomStatusRcmCurrent | 1.3.6.1.4.1.44568.1.1.110.1.1.12 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current in mA | |||||||||||||||||||||
| CroomStatusRcmCurrentAc | 1.3.6.1.4.1.44568.1.1.110.1.1.13 | Integer32 (0..512) | RO | ||||||||||||||||||
column · Integer32 (0..512) · read-only · current The residual current AC component in mA | |||||||||||||||||||||
| CroomStatusRcmCurrentDc | 1.3.6.1.4.1.44568.1.1.110.1.1.14 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current DC component in mA | |||||||||||||||||||||
| CroomStatusL1 | 1.3.6.1.4.1.44568.1.1.110.1.1.15 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room L1current. 100x.
| |||||||||||||||||||||
| CroomStatusL2 | 1.3.6.1.4.1.44568.1.1.110.1.1.16 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room L2 current. 100x.
| |||||||||||||||||||||
| CroomStatusL3 | 1.3.6.1.4.1.44568.1.1.110.1.1.17 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The room L3 current. 100x.
| |||||||||||||||||||||
| NaisleStatus | 1.3.6.1.4.1.44568.1.1.120 | ||||||||||||||||||||
| TaisleStatusTable | 1.3.6.1.4.1.44568.1.1.120.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of aisle. | |||||||||||||||||||||
| RaisleStatusEntry | 1.3.6.1.4.1.44568.1.1.120.1.1 | NA | |||||||||||||||||||
| CaisleStatusIndex | 1.3.6.1.4.1.44568.1.1.120.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CaisleStatusName | 1.3.6.1.4.1.44568.1.1.120.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The aisle name | |||||||||||||||||||||
| CaisleStatusState | 1.3.6.1.4.1.44568.1.1.120.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The aisle statee.g. normal, degraded | |||||||||||||||||||||
| CaisleDcStatusName | 1.3.6.1.4.1.44568.1.1.120.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter name in which this room is | |||||||||||||||||||||
| CaisleRoomStatusName | 1.3.6.1.4.1.44568.1.1.120.1.1.5 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The room name in which this aisle is | |||||||||||||||||||||
| CaisleStatusKwhTotal | 1.3.6.1.4.1.44568.1.1.120.1.1.6 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle KWhTotal.
| |||||||||||||||||||||
| CaisleStatusPowerWatts | 1.3.6.1.4.1.44568.1.1.120.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle power Watt. 100x.
| |||||||||||||||||||||
| CaisleStatusPowerVA | 1.3.6.1.4.1.44568.1.1.120.1.1.8 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle power VA. 100x.
| |||||||||||||||||||||
| CaisleStatusCurrent | 1.3.6.1.4.1.44568.1.1.120.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle current. 100x.
| |||||||||||||||||||||
| CaisleStatusVoltage | 1.3.6.1.4.1.44568.1.1.120.1.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle Voltage. 100x.
| |||||||||||||||||||||
| CaisleStatusTemp | 1.3.6.1.4.1.44568.1.1.120.1.1.11 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle temperature. 10x.
| |||||||||||||||||||||
| CaisleStatusHumidity | 1.3.6.1.4.1.44568.1.1.120.1.1.12 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle humidity. 10x.
| |||||||||||||||||||||
| CaisleStatusRcmCurrent | 1.3.6.1.4.1.44568.1.1.120.1.1.13 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current in mA | |||||||||||||||||||||
| CaisleStatusRcmCurrentAc | 1.3.6.1.4.1.44568.1.1.120.1.1.14 | Integer32 (0..512) | RO | ||||||||||||||||||
column · Integer32 (0..512) · read-only · current The residual current AC component in mA | |||||||||||||||||||||
| CaisleStatusRcmCurrentDc | 1.3.6.1.4.1.44568.1.1.120.1.1.15 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current DC component in mA | |||||||||||||||||||||
| CaisleStatusL1 | 1.3.6.1.4.1.44568.1.1.120.1.1.16 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle L1current. 100x.
| |||||||||||||||||||||
| CaisleStatusL2 | 1.3.6.1.4.1.44568.1.1.120.1.1.17 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle L2 current. 100x.
| |||||||||||||||||||||
| CaisleStatusL3 | 1.3.6.1.4.1.44568.1.1.120.1.1.18 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle L3 current. 100x.
| |||||||||||||||||||||
| NrackStatus | 1.3.6.1.4.1.44568.1.1.130 | ||||||||||||||||||||
| TrackStatusTable | 1.3.6.1.4.1.44568.1.1.130.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of rack. | |||||||||||||||||||||
| RrackStatusEntry | 1.3.6.1.4.1.44568.1.1.130.1.1 | NA | |||||||||||||||||||
| CrackStatusIndex | 1.3.6.1.4.1.44568.1.1.130.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CrackStatusName | 1.3.6.1.4.1.44568.1.1.130.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rack name | |||||||||||||||||||||
| CrackStatusState | 1.3.6.1.4.1.44568.1.1.130.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rack state.g. normal, degraded | |||||||||||||||||||||
| CrackDcStatusName | 1.3.6.1.4.1.44568.1.1.130.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter name in which this room is | |||||||||||||||||||||
| CrackRoomStatusName | 1.3.6.1.4.1.44568.1.1.130.1.1.5 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The room name in which this aisle is | |||||||||||||||||||||
| CrackAisleStatusName | 1.3.6.1.4.1.44568.1.1.130.1.1.6 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The room name in which this aisle is | |||||||||||||||||||||
| CrackStatusKwhTotal | 1.3.6.1.4.1.44568.1.1.130.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack KWhTotal.
| |||||||||||||||||||||
| CrackStatusPowerWatts | 1.3.6.1.4.1.44568.1.1.130.1.1.8 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack power Watt. 100x.
| |||||||||||||||||||||
| CrackStatusPowerVA | 1.3.6.1.4.1.44568.1.1.130.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack power VA. 100x.
| |||||||||||||||||||||
| CrackStatusCurrent | 1.3.6.1.4.1.44568.1.1.130.1.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack current. 100x.
| |||||||||||||||||||||
| CrackStatusVoltage | 1.3.6.1.4.1.44568.1.1.130.1.1.11 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack Voltage. 100x.
| |||||||||||||||||||||
| CrackStatusTemp | 1.3.6.1.4.1.44568.1.1.130.1.1.12 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack temperature. 10x.
| |||||||||||||||||||||
| CrackStatusHumidity | 1.3.6.1.4.1.44568.1.1.130.1.1.13 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack humidity. 10x.
| |||||||||||||||||||||
| CrackStatusRcmCurrent | 1.3.6.1.4.1.44568.1.1.130.1.1.14 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current in mA | |||||||||||||||||||||
| CrackStatusRcmCurrentAc | 1.3.6.1.4.1.44568.1.1.130.1.1.15 | Integer32 (0..512) | RO | ||||||||||||||||||
column · Integer32 (0..512) · read-only · current The residual current AC component in mA | |||||||||||||||||||||
| CrackStatusRcmCurrentDc | 1.3.6.1.4.1.44568.1.1.130.1.1.16 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current DC component in mA | |||||||||||||||||||||
| CrackStatusL1 | 1.3.6.1.4.1.44568.1.1.130.1.1.17 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack L1current. 100x.
| |||||||||||||||||||||
| CrackStatusL2 | 1.3.6.1.4.1.44568.1.1.130.1.1.18 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack L2 current. 100x.
| |||||||||||||||||||||
| CrackStatusL3 | 1.3.6.1.4.1.44568.1.1.130.1.1.19 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack L3 current. 100x.
| |||||||||||||||||||||
| NrackDeviceStatus | 1.3.6.1.4.1.44568.1.1.140 | ||||||||||||||||||||
| TrackDeviceStatusTable | 1.3.6.1.4.1.44568.1.1.140.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display status of rackDevice. | |||||||||||||||||||||
| RrackDeviceStatusEntry | 1.3.6.1.4.1.44568.1.1.140.1.1 | NA | |||||||||||||||||||
| CrackDeviceStatusIndex | 1.3.6.1.4.1.44568.1.1.140.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CrackDeviceStatusName | 1.3.6.1.4.1.44568.1.1.140.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rack device name | |||||||||||||||||||||
| CrackDeviceStatusState | 1.3.6.1.4.1.44568.1.1.140.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rackDevice state.g. normal, degraded | |||||||||||||||||||||
| CrackDeviceDcStatusName | 1.3.6.1.4.1.44568.1.1.140.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The datacenter name in which this rack Device is | |||||||||||||||||||||
| CrackDeviceRoomStatusName | 1.3.6.1.4.1.44568.1.1.140.1.1.5 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rackDevice in tha rack inroom name in which this aisle is | |||||||||||||||||||||
| CrackDeviceAisleStatusName | 1.3.6.1.4.1.44568.1.1.140.1.1.6 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rackDevice in tha rack inroom name in which this aisle is | |||||||||||||||||||||
| CrackDeviceRackStatusName | 1.3.6.1.4.1.44568.1.1.140.1.1.7 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The rackDevice in tha rack inroom name in which this aisle is | |||||||||||||||||||||
| CrackDeviceStatusKwhTotal | 1.3.6.1.4.1.44568.1.1.140.1.1.8 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle KWhTotal.
| |||||||||||||||||||||
| CrackDeviceStatusPowerWatts | 1.3.6.1.4.1.44568.1.1.140.1.1.9 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle power Watt. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusPowerVA | 1.3.6.1.4.1.44568.1.1.140.1.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle power VA. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusCurrent | 1.3.6.1.4.1.44568.1.1.140.1.1.11 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle current. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusVoltage | 1.3.6.1.4.1.44568.1.1.140.1.1.12 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle Voltage. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusTemp | 1.3.6.1.4.1.44568.1.1.140.1.1.13 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle temperature. 10x.
| |||||||||||||||||||||
| CrackDeviceStatusHumidity | 1.3.6.1.4.1.44568.1.1.140.1.1.14 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The aisle humidity. 10x.
| |||||||||||||||||||||
| CrackDeviceStatusSwitchState | 1.3.6.1.4.1.44568.1.1.140.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port switch state.
| |||||||||||||||||||||
| CrackDeviceStatusRcmCurrent | 1.3.6.1.4.1.44568.1.1.140.1.1.16 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current in mA | |||||||||||||||||||||
| CrackDeviceStatusRcmCurrentAc | 1.3.6.1.4.1.44568.1.1.140.1.1.17 | Integer32 (0..512) | RO | ||||||||||||||||||
column · Integer32 (0..512) · read-only · current The residual current AC component in mA | |||||||||||||||||||||
| CrackDeviceStatusRcmCurrentDc | 1.3.6.1.4.1.44568.1.1.140.1.1.18 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The residual current DC component in mA | |||||||||||||||||||||
| CrackDeviceStatusL1 | 1.3.6.1.4.1.44568.1.1.140.1.1.19 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack device L1 current. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusL2 | 1.3.6.1.4.1.44568.1.1.140.1.1.20 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack device L2 current. 100x.
| |||||||||||||||||||||
| CrackDeviceStatusL3 | 1.3.6.1.4.1.44568.1.1.140.1.1.21 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The rack device L3 current. 100x.
| |||||||||||||||||||||
| NrackDeviceConfig | 1.3.6.1.4.1.44568.1.1.141 | ||||||||||||||||||||
| TrackDeviceConfigTable | 1.3.6.1.4.1.44568.1.1.141.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to change status of RackDevice switch. | |||||||||||||||||||||
| RrackDeviceConfigEntry | 1.3.6.1.4.1.44568.1.1.141.1.1 | NA | |||||||||||||||||||
| CrackDeviceConfigPduIndex | 1.3.6.1.4.1.44568.1.1.141.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each group. | |||||||||||||||||||||
| CrackDeviceConfigSwitchState | 1.3.6.1.4.1.44568.1.1.141.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The rack Device switch state.
| |||||||||||||||||||||
| NcustomEntityStatus | 1.3.6.1.4.1.44568.1.1.200 | ||||||||||||||||||||
| NdeviceRuleStatus | 1.3.6.1.4.1.44568.1.1.500 | ||||||||||||||||||||
| NlogicalRuleStatus | 1.3.6.1.4.1.44568.1.1.510 | ||||||||||||||||||||
| NcurrentUserStatus | 1.3.6.1.4.1.44568.1.1.600 | ||||||||||||||||||||
| TcurrentUserStatusTable | 1.3.6.1.4.1.44568.1.1.600.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display of current logged in users. | |||||||||||||||||||||
| RcurrentUserStatusEntry | 1.3.6.1.4.1.44568.1.1.600.1.1 | NA | |||||||||||||||||||
| CcurrentUserStatusIndex | 1.3.6.1.4.1.44568.1.1.600.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each PDU. Its value ranges between 1 and the value of pduCount. | |||||||||||||||||||||
| CcurrentUserStatusName | 1.3.6.1.4.1.44568.1.1.600.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The logged in user name. | |||||||||||||||||||||
| CcurrentUserStatusRole | 1.3.6.1.4.1.44568.1.1.600.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current The role of this user | |||||||||||||||||||||
| Nwarnings | 1.3.6.1.4.1.44568.1.1.700 | ||||||||||||||||||||
| TwarningsTable | 1.3.6.1.4.1.44568.1.1.700.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display of current warnings. | |||||||||||||||||||||
| RwarningsEntry | 1.3.6.1.4.1.44568.1.1.700.1.1 | NA | |||||||||||||||||||
| CwarningsIndex | 1.3.6.1.4.1.44568.1.1.700.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each warning | |||||||||||||||||||||
| CwarningsTopLevelType | 1.3.6.1.4.1.44568.1.1.700.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is a group or sensor | |||||||||||||||||||||
| CwarningsTopLevelName | 1.3.6.1.4.1.44568.1.1.700.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is the group or device name | |||||||||||||||||||||
| CwarningsPortType | 1.3.6.1.4.1.44568.1.1.700.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is i, o s for device. | |||||||||||||||||||||
| CwarningsPortIndex | 1.3.6.1.4.1.44568.1.1.700.1.1.5 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This is zero based port index | |||||||||||||||||||||
| CwarningsPortVariable | 1.3.6.1.4.1.44568.1.1.700.1.1.6 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current voltage, Current, etc. | |||||||||||||||||||||
| CwarningsValue | 1.3.6.1.4.1.44568.1.1.700.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The value exceeding warning limit. 100x
| |||||||||||||||||||||
| Ncriticals | 1.3.6.1.4.1.44568.1.1.800 | ||||||||||||||||||||
| TcriticalsTable | 1.3.6.1.4.1.44568.1.1.800.1 | NA | |||||||||||||||||||
table · not-accessible · current A list to display of current criticals. | |||||||||||||||||||||
| RcriticalsEntry | 1.3.6.1.4.1.44568.1.1.800.1.1 | NA | |||||||||||||||||||
| CcriticalsIndex | 1.3.6.1.4.1.44568.1.1.800.1.1.1 | Integer32 (1..256) | NA | ||||||||||||||||||
column · Integer32 (1..256) · not-accessible · current A unique value for each critical | |||||||||||||||||||||
| CcriticalsTopLevelType | 1.3.6.1.4.1.44568.1.1.800.1.1.2 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is a group type or sensor | |||||||||||||||||||||
| CcriticalsTopLevelName | 1.3.6.1.4.1.44568.1.1.800.1.1.3 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is the group or device name | |||||||||||||||||||||
| CcriticalsPortType | 1.3.6.1.4.1.44568.1.1.800.1.1.4 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current This is i, o s for device. | |||||||||||||||||||||
| CcriticalsPortIndex | 1.3.6.1.4.1.44568.1.1.800.1.1.5 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This is zero based port index | |||||||||||||||||||||
| CcriticalsPortVariable | 1.3.6.1.4.1.44568.1.1.800.1.1.6 | DisplayString (SIZE (0..63)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-only · current voltage, Current, etc. | |||||||||||||||||||||
| CcriticalsValue | 1.3.6.1.4.1.44568.1.1.800.1.1.7 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The value exceeding critical limit. 100x
| |||||||||||||||||||||
| Ntriggers | 1.3.6.1.4.1.44568.1.1.900 | ||||||||||||||||||||
| SnotificationTriggerThreshold | 1.3.6.1.4.1.44568.1.1.900.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The notification threshold. | |||||||||||||||||||||
| SnotificationTriggerValue | 1.3.6.1.4.1.44568.1.1.900.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The notification value causing trap. | |||||||||||||||||||||
| SnotificationTriggerUnit | 1.3.6.1.4.1.44568.1.1.900.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The mesurement unit | |||||||||||||||||||||
| SnotificationTriggerPortType | 1.3.6.1.4.1.44568.1.1.900.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The port that causes the notification value causing trap | |||||||||||||||||||||
| SnotificationTriggerParameter | 1.3.6.1.4.1.44568.1.1.900.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Voltage, Current, etc. | |||||||||||||||||||||
| NgateConformance | 1.3.6.1.4.1.44568.1.10 | ||||||||||||||||||||
| NgateCompliances | 1.3.6.1.4.1.44568.1.10.1 | ||||||||||||||||||||
| MgateCompliance | 1.3.6.1.4.1.44568.1.10.1.1 | ||||||||||||||||||||
compliance · current values needed for notification values, etc.
| |||||||||||||||||||||
| NgateGroups | 1.3.6.1.4.1.44568.1.10.2 | ||||||||||||||||||||
| GsystemStatusGroup | 1.3.6.1.4.1.44568.1.10.2.1 | ||||||||||||||||||||
group · current A collection of objects providing identification information about the pdu.
| |||||||||||||||||||||
| GdeviceIdentificationGroup | 1.3.6.1.4.1.44568.1.10.2.2 | ||||||||||||||||||||
group · current A collection of objects providing identification information about the pdu. | |||||||||||||||||||||
| GdeviceConfigGroup | 1.3.6.1.4.1.44568.1.10.2.3 | ||||||||||||||||||||
group · current A collection of objects providing identification information about the pdu. | |||||||||||||||||||||
| GdeviceSettingsGroup | 1.3.6.1.4.1.44568.1.10.2.4 | ||||||||||||||||||||
group · current A collection of configurable values on a PDU. | |||||||||||||||||||||
| GdeviceDaisychainGroup | 1.3.6.1.4.1.44568.1.10.2.5 | ||||||||||||||||||||
group · current A collection of configurable values on a PDU. | |||||||||||||||||||||
| GdeviceResetGroup | 1.3.6.1.4.1.44568.1.10.2.6 | ||||||||||||||||||||
| GdeviceInputsGroup | 1.3.6.1.4.1.44568.1.10.2.7 | ||||||||||||||||||||
group · current A collection of objects providing identification information about the pdu.
| |||||||||||||||||||||
| GdeviceOutletsGroup | 1.3.6.1.4.1.44568.1.10.2.8 | ||||||||||||||||||||
group · current A collection of objects providing outlet port information about the pdu.
| |||||||||||||||||||||
| GdeviceBranchesGroup | 1.3.6.1.4.1.44568.1.10.2.9 | ||||||||||||||||||||
group · current A collection of objects providing branch information about the pdu.
| |||||||||||||||||||||
| GdeviceTotalsGroup | 1.3.6.1.4.1.44568.1.10.2.10 | ||||||||||||||||||||
group · current A collection of objects providing total information about the pdu.
| |||||||||||||||||||||
| GdeviceSensorsGroup | 1.3.6.1.4.1.44568.1.10.2.11 | ||||||||||||||||||||
group · current A collection of objects providing Sensor information about the pdu. | |||||||||||||||||||||
| GdeviceDigitalInputsGroup | 1.3.6.1.4.1.44568.1.10.2.14 | ||||||||||||||||||||
group · current A collection of objects providing Digital Input port information about the pdu. | |||||||||||||||||||||
| GdeviceDigitalOutputsGroup | 1.3.6.1.4.1.44568.1.10.2.16 | ||||||||||||||||||||
group · current A collection of objects providing Digital Output port information about the pdu. | |||||||||||||||||||||
| GdcStatusGroup | 1.3.6.1.4.1.44568.1.10.2.18 | ||||||||||||||||||||
group · current A collection of objects providing Data center information about the pdu. | |||||||||||||||||||||
| GroomStatusGroup | 1.3.6.1.4.1.44568.1.10.2.19 | ||||||||||||||||||||
group · current A collection of objects providing room information.
| |||||||||||||||||||||
| GaisleStatusGroup | 1.3.6.1.4.1.44568.1.10.2.20 | ||||||||||||||||||||
group · current A collection of objects providing room information.
| |||||||||||||||||||||
| GrackStatusGroup | 1.3.6.1.4.1.44568.1.10.2.21 | ||||||||||||||||||||
group · current A collection of objects providing rack information.
| |||||||||||||||||||||
| GrackDeviceStatusGroup | 1.3.6.1.4.1.44568.1.10.2.22 | ||||||||||||||||||||
group · current A collection of objects providing room information.
| |||||||||||||||||||||
| GrackDeviceConfigGroup | 1.3.6.1.4.1.44568.1.10.2.23 | ||||||||||||||||||||
| GcurrentUserStatusGroup | 1.3.6.1.4.1.44568.1.10.2.24 | ||||||||||||||||||||
group · current A collection of objects providing identification information about the pdu. | |||||||||||||||||||||
| GwarningsGroup | 1.3.6.1.4.1.44568.1.10.2.25 | ||||||||||||||||||||
group · current A collection of warning objects. | |||||||||||||||||||||
| GcriticalsGroup | 1.3.6.1.4.1.44568.1.10.2.26 | ||||||||||||||||||||
group · current A collection of warning objects. | |||||||||||||||||||||
| GtrapsGroup | 1.3.6.1.4.1.44568.1.10.2.27 | ||||||||||||||||||||
group · current A collection of traps.
| |||||||||||||||||||||
| GnotificationTriggerGroup | 1.3.6.1.4.1.44568.1.10.2.28 | ||||||||||||||||||||
group · current A collection of objects providing extra info in notification. | |||||||||||||||||||||
Traps / Notifications
- criticalEndEvent
1.3.6.1.4.1.44568.1.0.61 - criticalStartEvent
1.3.6.1.4.1.44568.1.0.60 - deviceConnectionConfigured
1.3.6.1.4.1.44568.1.0.20 - deviceConnectionDeleted
1.3.6.1.4.1.44568.1.0.21 - deviceDisconnected
1.3.6.1.4.1.44568.1.0.32 - deviceError
1.3.6.1.4.1.44568.1.0.33 - deviceReconnected
1.3.6.1.4.1.44568.1.0.31 - deviceStart
1.3.6.1.4.1.44568.1.0.30 - digitalInputEvent
1.3.6.1.4.1.44568.1.0.62 - restarted
1.3.6.1.4.1.44568.1.0.3 - systemRebooted
1.3.6.1.4.1.44568.1.0.2 - systemStarted
1.3.6.1.4.1.44568.1.0.1 - userAuthenticationFailure
1.3.6.1.4.1.44568.1.0.12 - userLogin
1.3.6.1.4.1.44568.1.0.10 - userLogout
1.3.6.1.4.1.44568.1.0.11 - warningEndEvent
1.3.6.1.4.1.44568.1.0.51 - warningStartEvent
1.3.6.1.4.1.44568.1.0.50
Groups and compliance
- aisleStatusGroup
- criticalsGroup
- currentUserStatusGroup
- dcStatusGroup
- deviceBranchesGroup
- deviceConfigGroup
- deviceDaisychainGroup
- deviceDigitalInputsGroup
- deviceDigitalOutputsGroup
- deviceIdentificationGroup
- deviceInputsGroup
- deviceOutletsGroup
- deviceResetGroup
- deviceSensorsGroup
- deviceSettingsGroup
- deviceTotalsGroup
- gateCompliance
- notificationTriggerGroup
- rackDeviceConfigGroup
- rackDeviceStatusGroup
- rackStatusGroup
- roomStatusGroup
- systemStatusGroup
- trapsGroup
- warningsGroup