SHELF-MIB
SAGEMCOM SASThe MIB module specific for ADR equipment
snmptranslate -m SHELF-MIB -Tpsnmpwalk -v2c -c <community> -m SHELF-MIB <host> 1.3.6.1.4.1.1038.150Imports
| EQUIPMENT-MIB | SagemBoolean, Severity |
|---|---|
| SAGEM-DR-MIB | sagemDr |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ishelf | 1.3.6.1.4.1.1038.150 | |||
identity The MIB module specific for ADR equipment | ||||
| SadrHotReset | 1.3.6.1.4.1.1038.150.1 | SagemBoolean | RW | |
scalar · SagemBoolean · read-write · current Software hot reset when this variable is set to TRUE | ||||
| Nled | 1.3.6.1.4.1.1038.150.2 | |||
| SledNumber | 1.3.6.1.4.1.1038.150.2.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of led in equipment. | ||||
| TledTable | 1.3.6.1.4.1.1038.150.2.2 | NA | ||
table · not-accessible · current List of led in equipment. | ||||
| RledEntry | 1.3.6.1.4.1.1038.150.2.2.1 | NA | ||
| CledIndex | 1.3.6.1.4.1.1038.150.2.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular led. | ||||
| CledPosition | 1.3.6.1.4.1.1038.150.2.2.1.2 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A reference to the associated Board on the equipment. | ||||
| CledType | 1.3.6.1.4.1.1038.150.2.2.1.3 | LedType | RO | |
column · LedType · read-only · current Type of the Led. | ||||
| CledStatus | 1.3.6.1.4.1.1038.150.2.2.1.4 | LedStatus | RO | |
column · LedStatus · read-only · current Status of this Led. | ||||
| NholdTime | 1.3.6.1.4.1.1038.150.3 | |||
| SadrFailHoldOffTime | 1.3.6.1.4.1.1038.150.3.1 | HoldTime | RW | |
scalar · HoldTime · read-write · current Failure hold off time : the time interval during which the defect is present and the failure is not raised | ||||
| SadrFailHoldOnTime | 1.3.6.1.4.1.1038.150.3.2 | HoldTime | RW | |
scalar · HoldTime · read-write · current Failure hold on time : the time interval during which the defect is cleared and the failure is not | ||||
| Nboard | 1.3.6.1.4.1.1038.150.20 | |||
| SboardNumber | 1.3.6.1.4.1.1038.150.20.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of board in equipment. | ||||
| TboardTable | 1.3.6.1.4.1.1038.150.20.2 | NA | ||
table · not-accessible · current List of board in equipment. | ||||
| RboardEntry | 1.3.6.1.4.1.1038.150.20.2.1 | NA | ||
| CboardIndex | 1.3.6.1.4.1.1038.150.20.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular slot. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to hardware. Each equipment maintain its own pool of values: ex ADR155c : A = 1, B = 2, ... M = 5, Fan = 6 ex ADR2500c: Fan = 1, PSU1 = 2, ...Trib1 = 8, Trib6= 13, Line1 = 14,... Switch2 = 17, Shelf = 18 | ||||
| CboardSlotName | 1.3.6.1.4.1.1038.150.20.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A DisplayString which identify the name of a particular slot. Its value is fixed at equipment design time. It is usualy related to hardware ex ADR155c : A, B, ... Fan ex ADR2500c: Fan, CCU, CTRL, PSU1, ... TRIB5, .... SWITCH1, ... | ||||
| CboardExpectType | 1.3.6.1.4.1.1038.150.20.2.1.3 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current A value which configure the expected type. If used, this one must be equal to one of existent boardListIndex for the considerated board. Otherwise, the value is set to 0. Known types are readable in boardListTable | ||||
| CboardInsertType | 1.3.6.1.4.1.1038.150.20.2.1.4 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current When the inserted board doesn't match with the expexted board the boardMismatch failure is generated. The type of the card could be found in hardware inventory. | ||||
| CboardExpectFamily | 1.3.6.1.4.1.1038.150.20.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Board Family corresponding to the specified expected kind. This value is send by the equipment. ex ADR155c : ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT, STM16 OPT, GBETH, SWITCH | ||||
| CboardInsertFamily | 1.3.6.1.4.1.1038.150.20.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Board Family corresponding to the type of inserted board. ex ADR155c : ex ADR2500c : CTRL, FAN, AUX, CCU, PSU, STM1 OPT, STM1 ERE, STM4 OPT, STM16 OPT, GBETH, SWITCH | ||||
| CboardActive | 1.3.6.1.4.1.1038.150.20.2.1.7 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to false, the transmission of this board stop and the board could properly be extracted | ||||
| CboardFirstPortIndex | 1.3.6.1.4.1.1038.150.20.2.1.8 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current If the card is a card with physical ports, then the value is the first index of a physical interface (SPI, PPI) in the mib SDH-ETS. Else, the value is 0. | ||||
| CboardProtectionType | 1.3.6.1.4.1.1038.150.20.2.1.9 | ProtectionType | RW | |
column · ProtectionType · read-write · current The value of this field indicates the kind of wanted card protection. The default value is NONE. if value is changed in cardP(1)then an entry is created in cardpTable. But this table has to be completed (by setting the cardpReliefIndex,...) to obtain a configured protection. if value is changed in None(0)then the associated entry in cardpTable is deleted. Some cards don't accept any protection. In that case, the value of this field will remain to NONE | ||||
| CboardMonitor | 1.3.6.1.4.1.1038.150.20.2.1.10 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to false, the failure detection is stopped for this board. | ||||
| CboardFailure | 1.3.6.1.4.1.1038.150.20.2.1.11 | BoardFailure | RO | |
column · BoardFailure · read-only · current Active failures on board | ||||
| CboardSeverity | 1.3.6.1.4.1.1038.150.20.2.1.12 | Severity | RO | |
column · Severity · read-only · current A reference to failure severity for boards. | ||||
| CboardMissingSev | 1.3.6.1.4.1.1038.150.20.2.1.13 | Severity | RW | |
column · Severity · read-write · current A reference to failure severity for boards. | ||||
| CboardMismatchSev | 1.3.6.1.4.1.1038.150.20.2.1.14 | Severity | RW | |
column · Severity · read-write · current A reference to failure severity for boards. | ||||
| CboardDefectiveSev | 1.3.6.1.4.1.1038.150.20.2.1.15 | Severity | RW | |
column · Severity · read-write · current A reference to failure severity for boards. | ||||
| NboardList | 1.3.6.1.4.1.1038.150.30 | |||
| SboardListNumber | 1.3.6.1.4.1.1038.150.30.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of entry of the boardList Table | ||||
| TboardListTable | 1.3.6.1.4.1.1038.150.30.2 | NA | ||
table · not-accessible · current List of board type able to be managed by this equipment . In order to manage a new type, just insert the board and if the family match with a known family, this table will be expand automaticaly with the new type inserted The XX fist value defined ( with boardSlotName = Shelf = 18 for ADR2500c) is a list all possible type of boardInsertedType. | ||||
| RboardListEntry | 1.3.6.1.4.1.1038.150.30.2.1 | NA | ||
| CboardListIndex | 1.3.6.1.4.1.1038.150.30.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value. | ||||
| CboardListSlot | 1.3.6.1.4.1.1038.150.30.2.1.2 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A reference to the corresponding Slot. | ||||
| CboardListType | 1.3.6.1.4.1.1038.150.30.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current In order to manage a new type, just insert the board and if the family match with a known family, this table will be expand automaticaly with the new type inserted. ex ADR155c : ex ADR2500c: 4S1.1, S4.1, L16.2, SWITCH, ... | ||||
| NsoftInv | 1.3.6.1.4.1.1038.150.40 | |||
| SsoftInventoryNumber | 1.3.6.1.4.1.1038.150.40.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of entry of the softInventory Table | ||||
| TsoftInventoryTable | 1.3.6.1.4.1.1038.150.40.2 | NA | ||
table · not-accessible · current List of software inventory used | ||||
| RsoftInventoryEntry | 1.3.6.1.4.1.1038.150.40.2.1 | NA | ||
| CsoftInventoryIndex | 1.3.6.1.4.1.1038.150.40.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value. | ||||
| CsoftInventoryBoard | 1.3.6.1.4.1.1038.150.40.2.1.2 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A reference to the corresponding Slot. This variable is needed because some boards have their owns Applicative and Boot codes. | ||||
| CsoftInventoryType | 1.3.6.1.4.1.1038.150.40.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Indication of type software | ||||
| CsoftInventoryCode | 1.3.6.1.4.1.1038.150.40.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Indication of version code | ||||
| CsoftInventoryExt | 1.3.6.1.4.1.1038.150.40.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Indication of extension code. This one is not mandatory. | ||||
| NhardInv | 1.3.6.1.4.1.1038.150.50 | |||
| ShardInventoryNumber | 1.3.6.1.4.1.1038.150.50.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of different hardware inventory in equipment. | ||||
| ThardInventoryTable | 1.3.6.1.4.1.1038.150.50.2 | NA | ||
table · not-accessible · current List of hardware inventory in equipment. A hardware inventory is a description associed to a particular card | ||||
| RhardInventoryEntry | 1.3.6.1.4.1.1038.150.50.2.1 | NA | ||
| ChardInventoryIndex | 1.3.6.1.4.1.1038.150.50.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current Index of the inventory entry that corresponds to a particular slot | ||||
| ChardInventoryBoard | 1.3.6.1.4.1.1038.150.50.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Family of card inserted in the slot | ||||
| ChardInventoryDescr | 1.3.6.1.4.1.1038.150.50.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The content of the inventory: a textual description | ||||
| Nlaser | 1.3.6.1.4.1.1038.150.100 | |||
| SlaserNumber | 1.3.6.1.4.1.1038.150.100.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of optical interface in equipment. | ||||
| TlaserTable | 1.3.6.1.4.1.1038.150.100.2 | NA | ||
table · not-accessible · current List of synchronous physical interface in equipment. | ||||
| RlaserEntry | 1.3.6.1.4.1.1038.150.100.2.1 | NA | ||
row · not-accessible · current A particular synchronous physical interface of the equipment.
| ||||
| ClaserIndex | 1.3.6.1.4.1.1038.150.100.2.1.1 | INTEGER (0..2147483647) | RO | |
| ClaserTxEnable | 1.3.6.1.4.1.1038.150.100.2.1.2 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current Enable(true) or disable(false) the laser output of the interface. | ||||
| ClaserALSEnable | 1.3.6.1.4.1.1038.150.100.2.1.3 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current Automatic Laser Shutdown enable(true) or disable(false). When enabled, this function cuts the laser output when a los is detected on input signal. | ||||
| ClaserALSRestart2s | 1.3.6.1.4.1.1038.150.100.2.1.4 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current Operator command to start a one shot emission during 2s. | ||||
| ClaserALSRestart90s | 1.3.6.1.4.1.1038.150.100.2.1.5 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current Operator command to start a one shot emission during 90s. | ||||
| Neow | 1.3.6.1.4.1.1038.150.120 | |||
| SeowNumber | 1.3.6.1.4.1.1038.150.120.1 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of EOW port in equipment. | ||||
| TeowTable | 1.3.6.1.4.1.1038.150.120.2 | NA | ||
table · not-accessible · current List of EOW port in equipment. | ||||
| ReowEntry | 1.3.6.1.4.1.1038.150.120.2.1 | NA | ||
| CeowIndex | 1.3.6.1.4.1.1038.150.120.2.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular EOW port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware. | ||||
| CeowName | 1.3.6.1.4.1.1038.150.120.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current A text string which identifies the particular entry among the EOW port entries. | ||||
| CeowSrcType | 1.3.6.1.4.1.1038.150.120.2.1.6 | EOWType | RW | |
column · EOWType · read-write · current A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection. | ||||
| CeowSrcPtr | 1.3.6.1.4.1.1038.150.120.2.1.7 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection. | ||||
| CeowSinkType | 1.3.6.1.4.1.1038.150.120.2.1.8 | EOWType | RW | |
column · EOWType · read-write · current A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection. | ||||
| CeowSinkPtr | 1.3.6.1.4.1.1038.150.120.2.1.9 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current A reference to the object which sends the data flow to this interface. Usually the value is the oid of a vc12 or a connection. | ||||
| CeowClockMode | 1.3.6.1.4.1.1038.150.120.2.1.10 | EOWClockMode | RW | |
column · EOWClockMode · read-write · current Select the direction of the two external synchronisation lines. | ||||