GIGE-MIB
SAGEMCOM SASThe MIB module specific for GigE module of Adr2500c
snmptranslate -m GIGE-MIB -Tpsnmpwalk -v2c -c <community> -m GIGE-MIB <host> 1.3.6.1.4.1.1038.17.10Imports
| ADR2500C-MIB | adr2500c |
|---|---|
| EQUIPMENT-MIB | SagemBoolean, Severity |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Igige | 1.3.6.1.4.1.1038.17.10 | |||
identity The MIB module specific for GigE module of Adr2500c | ||||
| SgigeNumber | 1.3.6.1.4.1.1038.17.10.10 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of gigabitEthernet cards in equipment. | ||||
| TgigeTable | 1.3.6.1.4.1.1038.17.10.11 | NA | ||
table · not-accessible · current List of gigabitEthernet cards in equipment. | ||||
| RgigeEntry | 1.3.6.1.4.1.1038.17.10.11.1 | NA | ||
| CgigeIndex | 1.3.6.1.4.1.1038.17.10.11.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular gigabitEthernet card of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware | ||||
| CgigeSdhBandwidth | 1.3.6.1.4.1.1038.17.10.11.1.2 | BandwidthSize | RW | |
column · BandwidthSize · read-write · current This field set the size of the SDH Bandwidth which is allocated to the gigabitEthernet card. | ||||
| CgigeAutoTest | 1.3.6.1.4.1.1038.17.10.11.1.3 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, an autotest is executed on the gigabitEthernet card. | ||||
| CgigeWarmStart | 1.3.6.1.4.1.1038.17.10.11.1.4 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, a warmStart is launched on the gigabitEthernet card. | ||||
| SmaintenanceNumber | 1.3.6.1.4.1.1038.17.10.20 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of gigabitEthernet ports in equipment. | ||||
| TmaintenanceTable | 1.3.6.1.4.1.1038.17.10.21 | NA | ||
table · not-accessible · current List of gigabitEthernet ports in equipment. | ||||
| RmaintenanceEntry | 1.3.6.1.4.1.1038.17.10.21.1 | NA | ||
row · not-accessible · current A particular gigabitEthernet port of the equipment.
| ||||
| CmaintenanceIndex | 1.3.6.1.4.1.1038.17.10.21.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular gigabitEthernet port of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware | ||||
| CmaintenanceAutoTest | 1.3.6.1.4.1.1038.17.10.21.1.2 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, an autotest is executed on the gigabitEthernet port. | ||||
| CmaintenanceLoopback | 1.3.6.1.4.1.1038.17.10.21.1.3 | LoopbackGE | RW | |
column · LoopbackGE · read-write · current This field set a loopback mode to a particular gigabitEthernet port. | ||||
| CmaintenancePRBSSent | 1.3.6.1.4.1.1038.17.10.21.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current This field allows to sent a PRBS frame on a particular gigabitEthernet port. | ||||
| CmaintenancePRBSReceived | 1.3.6.1.4.1.1038.17.10.21.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The value is the actual PRBS frame received in the particular gigabitEthernet port. | ||||
| CmaintenanceResetAllCounters | 1.3.6.1.4.1.1038.17.10.21.1.6 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, all counters attached to this interface are deleted. | ||||
| CmaintenanceResetLanCounters | 1.3.6.1.4.1.1038.17.10.21.1.7 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, all QoS counters attached to this interface are deleted. | ||||
| CmaintenanceResetGfpCounters | 1.3.6.1.4.1.1038.17.10.21.1.8 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, all Gfp counters attached to this interface are deleted. | ||||
| CmaintenanceResetQosCounters | 1.3.6.1.4.1.1038.17.10.21.1.9 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to true, all Qos counters attached to this interface are deleted. | ||||
| SqosNumber | 1.3.6.1.4.1.1038.17.10.30 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of Quality of Service set in equipment. This number match to channelNumber because there is only one Qos per Sdh Channel. = number of entries in qosTable | ||||
| TqosTable | 1.3.6.1.4.1.1038.17.10.31 | NA | ||
table · not-accessible · current List of Qos in equipment. | ||||
| RqosEntry | 1.3.6.1.4.1.1038.17.10.31.1 | NA | ||
| CqosIndex | 1.3.6.1.4.1.1038.17.10.31.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular QoS of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware | ||||
| CqosClassNumber | 1.3.6.1.4.1.1038.17.10.31.1.2 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current This field allows to choose the number of CoS defined for the QoS | ||||
| CqosType | 1.3.6.1.4.1.1038.17.10.31.1.3 | QosType | RW | |
column · QosType · read-write · current This field allows to choose the type of Qos | ||||
| CqosCongestionControl | 1.3.6.1.4.1.1038.17.10.31.1.4 | CongestionControl | RW | |
column · CongestionControl · read-write · current This field allows to choose a mechanism to manage congestion problems. Some Type of Qos force the value of this field. | ||||
| CqosSchedulingSystem | 1.3.6.1.4.1.1038.17.10.31.1.5 | SchedulingSystem | RW | |
column · SchedulingSystem · read-write · current This field allows to choose a mechanism to manage congestion problems. | ||||
| CqosBwREnable | 1.3.6.1.4.1.1038.17.10.31.1.6 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current This field allows to activate or desactivate the Sdh throughput reservation feature. | ||||
| CqosHCInCCDiscardsGe | 1.3.6.1.4.1.1038.17.10.31.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets received on the GE interface which were discarded to prevent from switch saturation | ||||
| CqosHCInCCDiscardsWan | 1.3.6.1.4.1.1038.17.10.31.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets received on the WAN interface which were discarded to prevent from switch saturation | ||||
| ScosNumber | 1.3.6.1.4.1.1038.17.10.40 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of Class of Service set in equipment = number of entries in cosTable = qosNumber * qosClassNumber | ||||
| TcosTable | 1.3.6.1.4.1.1038.17.10.41 | NA | ||
table · not-accessible · current List of CoS in equipment. | ||||
| RcosEntry | 1.3.6.1.4.1.1038.17.10.41.1 | NA | ||
| CcosIndex | 1.3.6.1.4.1.1038.17.10.41.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular CoS of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are taken between 1 and cosNumber. | ||||
| CcosQosId | 1.3.6.1.4.1.1038.17.10.41.1.2 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current This field allows to identify which QoS this Class is belonging. Its values must match to qosIndex. | ||||
| CcosId | 1.3.6.1.4.1.1038.17.10.41.1.3 | CosId | RO | |
column · CosId · read-only · current This field identify the class of Service. | ||||
| CcosDefinition | 1.3.6.1.4.1.1038.17.10.41.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current This optional textual field brings some precisions about the CoS configuration. | ||||
| CcosBwRRatioMin | 1.3.6.1.4.1.1038.17.10.41.1.5 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current When the qosBwREnable field is set to True, then this field allows to configure the guaranted percentage of SDH throughput which must be booked up for the CoS | ||||
| CcosBwRRatioMax | 1.3.6.1.4.1.1038.17.10.41.1.6 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current When the qosBwREnable field is set to True, then this field allows to configure the maximum percentage of SDH throughput which can be booked up for the CoS | ||||
| CcosHCInOctets | 1.3.6.1.4.1.1038.17.10.41.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets received on the GE interface (excluding framing characters preambule and sfd) and belonging to a CosId packet | ||||
| CcosHCOutOctets | 1.3.6.1.4.1.1038.17.10.41.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets transmitted out of the Wan interface (excluding framing characters preambule and sfd) and belonging to a CosId paket | ||||
| CcosHCInPkts | 1.3.6.1.4.1.1038.17.10.41.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets received on the GE interface (excluding framing characters preambule and sfd) and belonging to a CosId packet | ||||
| CcosHCOutPkts | 1.3.6.1.4.1.1038.17.10.41.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets transmitted out of the Wan interface (excluding framing characters preambule and sfd) and belonging to a CosId paket | ||||
| CcosHCInCCDiscards | 1.3.6.1.4.1.1038.17.10.41.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of CosId packets received on the GE interface which were discarded by RED/WRED/BandWidthReservation to prevent from congestion. | ||||
| SgfpNumber | 1.3.6.1.4.1.1038.17.10.50 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current ports Number of the Gfp layer. = number of entries in gfpTable | ||||
| TgfpTable | 1.3.6.1.4.1.1038.17.10.51 | NA | ||
table · not-accessible · current List of gfp port in the equipment. | ||||
| RgfpEntry | 1.3.6.1.4.1.1038.17.10.51.1 | NA | ||
| CgfpIndex | 1.3.6.1.4.1.1038.17.10.51.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular gfp port in the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are mapped to channelIndex values. | ||||
| CgfpHCInPkts | 1.3.6.1.4.1.1038.17.10.51.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets received on the Gfp interface | ||||
| CgfpHCInIdlePkts | 1.3.6.1.4.1.1038.17.10.51.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of Idle frames received on the Gfp interface | ||||
| CgfpHCInCorruptedPkts | 1.3.6.1.4.1.1038.17.10.51.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of mismatched packets received on the Gfp interface. | ||||
| CgfpHCInErrors | 1.3.6.1.4.1.1038.17.10.51.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of mismatched packets that have been discarded. | ||||
| CgfpHCInCorrectedPkts | 1.3.6.1.4.1.1038.17.10.51.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of mismatched packets received on the Gfp interface that have been corrected. | ||||
| CgfpHCFCSErrors | 1.3.6.1.4.1.1038.17.10.51.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames received on the Gfp interface that are an integral number of octets in length but do not pass the FCS check. | ||||
| CgfpHCInOctets | 1.3.6.1.4.1.1038.17.10.51.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of Octets received on the Gfp interface | ||||
| CgfpHCOutPkts | 1.3.6.1.4.1.1038.17.10.51.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets transmitted out of the Gfp interface | ||||
| CgfpHCOutIdlePkts | 1.3.6.1.4.1.1038.17.10.51.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of Idle frame transmitted out of the Gfp interface | ||||
| CgfpHCOutOctets | 1.3.6.1.4.1.1038.17.10.51.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets transmitted out of the Gfp interface | ||||
| CgfpIdleRate | 1.3.6.1.4.1.1038.17.10.51.1.12 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current The received Idle frames rate on a particular gfp port. | ||||
| CgfpSendingRate | 1.3.6.1.4.1.1038.17.10.51.1.13 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current The sent frames rate on a particular gfp port. | ||||
| CgfpState | 1.3.6.1.4.1.1038.17.10.51.1.14 | GfpState | RO | |
column · GfpState · read-only · current This field allows to know in which state this gfp port is working. | ||||
| CgfpAdminStatus | 1.3.6.1.4.1.1038.17.10.51.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current The desired state of the gfp port. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CgfpOperStatus | 1.3.6.1.4.1.1038.17.10.51.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational state of the gfp port. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CgfpMonitor | 1.3.6.1.4.1.1038.17.10.51.1.17 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to false, the failure detection is stopped for this gfp port. | ||||
| CgfpFailure | 1.3.6.1.4.1.1038.17.10.51.1.18 | GfpFailure | RO | |
column · GfpFailure · read-only · current Active failures on channel | ||||
| CgfpSeverity | 1.3.6.1.4.1.1038.17.10.51.1.19 | Severity | RO | |
column · Severity · read-only · current A reference to failure severity for gfp port. | ||||
| CgfpOOFD | 1.3.6.1.4.1.1038.17.10.51.1.20 | Severity | RW | |
column · Severity · read-write · current Severity associated with Out of Frame Delineation failure for gfp port. | ||||
| CgfpLOFD | 1.3.6.1.4.1.1038.17.10.51.1.21 | Severity | RW | |
column · Severity · read-write · current Severity associated with Loss Of Frame Delineation failure for gfp port. | ||||
| CgfpFDSC | 1.3.6.1.4.1.1038.17.10.51.1.22 | Severity | RW | |
column · Severity · read-write · current Severity associated with Frame Delineation State Change failure for gfp port. | ||||
| SpauseNumber | 1.3.6.1.4.1.1038.17.10.60 | INTEGER (0..2147483647) | RO | |
scalar · INTEGER (0..2147483647) · read-only · current Number of ports in the equipment which accept Pause mechanism = number of entries in pauseTable | ||||
| TpauseTable | 1.3.6.1.4.1.1038.17.10.61 | NA | ||
table · not-accessible · current List of Ethernet port in the equipment which accept Pause mechanism. | ||||
| RpauseEntry | 1.3.6.1.4.1.1038.17.10.61.1 | NA | ||
| CpauseIndex | 1.3.6.1.4.1.1038.17.10.61.1.1 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular Ethernet Physical port of a gigabitEthernet card. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are mapped to IfIndex values of Lan Ports. | ||||
| CpauseTime | 1.3.6.1.4.1.1038.17.10.61.1.2 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current This field allows to set the Time during which the linkPartner stop any transmission. The Unit used is the time slot (= 512 ns). | ||||
| CpauseBetweenTime | 1.3.6.1.4.1.1038.17.10.61.1.3 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current This field allows to set the Time between two Pause Frames transmission. The Unit used is the time slot (= 512 ns). | ||||
| CpauseMacSA | 1.3.6.1.4.1.1038.17.10.61.1.4 | PhysAddress | RW | |
column · PhysAddress · read-write · current The physical address of the Ethernet port. This address is used to fill the SourceAddress field of any Pause Frame which is trasmitted by the LinkPartner. | ||||
| CpauseMacDA | 1.3.6.1.4.1.1038.17.10.61.1.5 | PhysAddress | RW | |
column · PhysAddress · read-write · current The physical address used to fill the DestinationAddress field of any Pause Frame which is transmitted by the LinkPartner. | ||||
| CpauseCHT | 1.3.6.1.4.1.1038.17.10.61.1.6 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current This field allows to configure the credit High Threshold of Pause mechanism. | ||||
| CpauseCLT | 1.3.6.1.4.1.1038.17.10.61.1.7 | INTEGER (0..2147483647) | RW | |
column · INTEGER (0..2147483647) · read-write · current This field allows to configure the credit Low Threshold of Pause mechanism. | ||||
| CpauseMonitor | 1.3.6.1.4.1.1038.17.10.61.1.10 | SagemBoolean | RW | |
column · SagemBoolean · read-write · current When the value of this field is set to false, the failure detection is stopped for this Ethernet port. | ||||
| CpauseFailure | 1.3.6.1.4.1.1038.17.10.61.1.11 | PauseFailure | RO | |
column · PauseFailure · read-only · current Active failures in the pause mechanism of the Ethernet port. | ||||
| CpauseSeverity | 1.3.6.1.4.1.1038.17.10.61.1.12 | Severity | RO | |
column · Severity · read-only · current A reference to severity associated to the current pause failure. | ||||
| CpauseModeRejected | 1.3.6.1.4.1.1038.17.10.61.1.13 | Severity | RW | |
column · Severity · read-write · current This field allows to configure the Severity associated with Pause Mode Rejected failure for Ethernet port. | ||||