EQUIPMENT-MIB
SAGEMCOM SASModification: Date: 15 11 2002 Description: sagemDr replace sagem-dr NOTIFICATION-TYPE replace TRAP-TYPE Modification: Date: 14 06 2002 Description: Modification of Imports DisplayString is imported from SNMPv2-TC instead of RFC1213 Modification: Date: 20 12 1999 Description: Modification of comments Modification of bugs Modification: Date: 19 11 1999 Name: sagem-dr, SagemBoolean Description: Definition of OID sagem-dr instead of sat Definition of data SagemBoolean instead of Boolean Name: communityString Description: SIZE(0..20) replaced by SIZE (0..50) New Object: Date: 19 11 1999 Name: All *Manager* are new objects Description: Manager list that recieves the traps. Name: equipCptModif Description: Incremental counter used to manage the modifications on the equipment. Name: communityAcces Description: new names used iONNOS-ANM-Supervisor instead of Set ... Name: trapCommunity Description:SIZE(0..20) replaced by SIZE (0..50) Name: equipLoad Description: Object is simplified to an OID Name: equipLoadDiagnostic Description: A string to help in case of problem Name: transferedItemTable,transferedItem, TransferedItem,transferedItemIndex transferedItemType,transferedItemVersion transferedItemComments Description: These object are used to manage the download and upload of some part of the data; the data can be a part of a program, a complete program, or a config. The transferedItemType is reused in equipLocalFile Name: equipStatusV2 Description: used by IONOS ANM V2
snmptranslate -m EQUIPMENT-MIB -Tpsnmpwalk -v2c -c <community> -m EQUIPMENT-MIB <host> 1.3.6.1.4.1.1038.107Imports
| SAGEM-DR-MIB | sagemDr |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iequip | 1.3.6.1.4.1.1038.107 | ||||||||||||
identity Modification: Date: 15 11 2002 Description: sagemDr replace sagem-dr NOTIFICATION-TYPE replace TRAP-TYPE Modification: Date: 14 06 2002 Description: Modification of Imports DisplayString is imported from SNMPv2-TC instead of RFC1213 Modification: Date: 20 12 1999 Description: Modification of comments Modification of bugs Modification: Date: 19 11 1999 Name: sagem-dr, SagemBoolean Description: Definition of OID sagem-dr instead of sat Definition of data SagemBoolean instead of Boolean Name: communityString Description: SIZE(0..20) replaced by SIZE (0..50) New Object: Date: 19 11 1999 Name: All *Manager* are new objects Description: Manager list that recieves the traps. Name: equipCptModif Description: Incremental counter used to manage the modifications on the equipment. Name: communityAcces Description: new names used iONNOS-ANM-Supervisor instead of Set ... Name: trapCommunity Description:SIZE(0..20) replaced by SIZE (0..50) Name: equipLoad Description: Object is simplified to an OID Name: equipLoadDiagnostic Description: A string to help in case of problem Name: transferedItemTable,transferedItem, TransferedItem,transferedItemIndex transferedItemType,transferedItemVersion transferedItemComments Description: These object are used to manage the download and upload of some part of the data; the data can be a part of a program, a complete program, or a config. The transferedItemType is reused in equipLocalFile Name: equipStatusV2 Description: used by IONOS ANM V2 | |||||||||||||
| NequipTraps | 1.3.6.1.4.1.1038.107.0 | ||||||||||||
| !equipStatusTrap | 1.3.6.1.4.1.1038.107.0.1 | ||||||||||||
notification · current This trap indicates the alarm status of the equipment. Only sent with IONOS ANM V1
| |||||||||||||
| SequipDateTime | 1.3.6.1.4.1.1038.107.1 | IntDateTime | RW | ||||||||||
scalar · IntDateTime · read-write · current The value of this field is the date and time of the equipment. It is the number of seconds since 1st January 1970. | |||||||||||||
| SequipLastModif | 1.3.6.1.4.1.1038.107.2 | IntDateTime | RO | ||||||||||
scalar · IntDateTime · read-only · current The date and time when the equipment was last modified. | |||||||||||||
| SequipWarmStart | 1.3.6.1.4.1.1038.107.3 | SagemBoolean | RW | ||||||||||
scalar · SagemBoolean · read-write · current The equipment make a hot start if this field is set to `true'. This operation can only be done by the iONOSANMsupervisor or dIRECTACCESSsupervisor. The value returns to `false' after the restart. | |||||||||||||
| SequipClearConf | 1.3.6.1.4.1.1038.107.4 | SagemBoolean | RW | ||||||||||
scalar · SagemBoolean · read-write · current The equipment resets all its parameters, including those stored in non-volatile media storage, if this field is set to `true'. This command does not apply to mib-2 parameters, like @ip, routing table, etc ... This operation can only be done by the iONOSANMsupervisor or dIRECTACCESSsupervisor. The value returns to `false' after the reset. This operation is optionnal. | |||||||||||||
| ScommunityNumber | 1.3.6.1.4.1.1038.107.5 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current Number of community in equipment. | |||||||||||||
| TcommunityTable | 1.3.6.1.4.1.1038.107.6 | NA | |||||||||||
table · not-accessible · current List of community in equipment. | |||||||||||||
| RcommunityEntry | 1.3.6.1.4.1.1038.107.6.1 | NA | |||||||||||
| CcommunityIndex | 1.3.6.1.4.1.1038.107.6.1.1 | INTEGER (0..2147483647) | RO | ||||||||||
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular community. | |||||||||||||
| CcommunityString | 1.3.6.1.4.1.1038.107.6.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current A unique textual string that can be used by a SNMP manager as community string. It can be also used as password for other configuration like http, not only snmp. The table must have at least two entries associated with the iONOSANMsupervisor access right (this entry is created by equipement at startup with value `secret') and dIRECTACCESSsupervisor access right (this entry is created by equipement at startup with value 'supervisor') . According to equipment implementation, it is possible to create other entries associed with lower rights that PDU community string can afford (actualy equal if IONOSANMsupervisor status is granted). If the other access rights are created at startup by the equipment, its must use the following values : 'private' for 'iONOSANMoperator, 'public' for 'iONOSANMobserver', 'operator' for dIRECTACCESSoperator, 'observer' for dIRECTACCESSobserver, and 'client' for the others. All community string can be modified only by IONOSANMsupervisor. A dIRECTACCESS community string can be modified by dIRECTACCESSsupervisor. The reading of a community string gives *** for all access rights . An entry may be discarded by setting its community string to void string. This should not be used by the administrator or he could discard himself | |||||||||||||
| CcommunityAcces | 1.3.6.1.4.1.1038.107.6.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current iONOSANMsupervisor(3) access :
allows all operations including community string
(community string = password)
iONOSANMoperator(2) access :
allows all set operations except write community
string read or write and also some special operations.
iONOSANMobserver (1) access :
allows only get and get_next requests.
dIRECTACCESSsupervisor(6) access :
allows all operations EXcluding IONOS ANM community string
dIRECTACCESSoperator(5) access :
allows all set operations except write community
string read or write and also some special operations.
dIRECTACCESSobserver (4) access :
allows only get and get_next requests.
iONOSANMclientoperator(8) access :
allows only set some special operations
iONOSANMclientobserver(7) access :
allows only get and get_next requests for special operations
dIRECTACCESSclientoperator(10) access :
allows only set some special operations
dIRECTACCESSclientobserver(9) access :
allows only get and get_next requests for special operations
| |||||||||||||
| StrapNumber | 1.3.6.1.4.1.1038.107.7 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current Number of trap receivers description in equipment. | |||||||||||||
| TtrapTable | 1.3.6.1.4.1.1038.107.8 | NA | |||||||||||
table · not-accessible · current List of trap receivers in equipment. | |||||||||||||
| RtrapEntry | 1.3.6.1.4.1.1038.107.8.1 | NA | |||||||||||
| CtrapIndex | 1.3.6.1.4.1.1038.107.8.1.1 | INTEGER (0..2147483647) | RO | ||||||||||
column · INTEGER (0..2147483647) · read-only · current A unique value which identify a particular trap receiver. The value of index is a constant assigned to an entry at equipment design time. | |||||||||||||
| CtrapDestination | 1.3.6.1.4.1.1038.107.8.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The ip address to which the equipment will send the traps. Note that the value must be unique along this table. An entry may be discarded by setting the IP address to 0.0.0.0 | |||||||||||||
| CtrapCommunity | 1.3.6.1.4.1.1038.107.8.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The community string to use when a trap is sent to this address. | |||||||||||||
| NequipLoad | 1.3.6.1.4.1.1038.107.9 | ||||||||||||
| SequipLocalFile | 1.3.6.1.4.1.1038.107.9.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The file path suitable for the equipment. | |||||||||||||
| SequipServerAddress | 1.3.6.1.4.1.1038.107.9.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The ip adress of tftp serveur from which is read/write the file `equipRemoteFile'. | |||||||||||||
| SequipRemoteFile | 1.3.6.1.4.1.1038.107.9.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The file path to be loaded on/from the equipement. | |||||||||||||
| SequipDirection | 1.3.6.1.4.1.1038.107.9.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This field selects the direction of data stream. When it is set to `backupDownload', only the transfert is done. When it is set to `download' the transfert is done and then the information transfert is switched in the operational state. When it is set to `switching', there is no transfert; there is only a switching.
| |||||||||||||
| SequipLoadProceed | 1.3.6.1.4.1.1038.107.9.5 | SagemBoolean | RW | ||||||||||
scalar · SagemBoolean · read-write · current This entry is use to start (set to `true') loading a file on/from a equipment which has a tftp client. The value of the field remains to `true' until load is completed or has been aborted. This operation can only be done by the iONOSANMsupervisor or dIRECTACCESSsupervisor. It may be possible to abort the loading by setting it to false. After the switching of a new configuration, the equipment must increase the value of the variable 'equipCptModif' | |||||||||||||
| SequipLoadDiagnostic | 1.3.6.1.4.1.1038.107.9.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A string used to help in case of trouble. | |||||||||||||
| SequipLoadProtocole | 1.3.6.1.4.1.1038.107.9.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Protocole used by the equipment for the download
| |||||||||||||
| SequipStatus | 1.3.6.1.4.1.1038.107.10 | Severity | RO | ||||||||||
scalar · Severity · read-only · current This field summerizes the status of all equipment objects (port, card, ...) This variable is polled by IONOS ANM V1 The 'equipmentStatusTrap' is sent after a GET on this variable. equipStatus and equipStatusTrap are only used with V1. | |||||||||||||
| SequipStatusV2 | 1.3.6.1.4.1.1038.107.11 | Severity | RO | 1 | |||||||||
scalar · Severity · read-only · current Replace equipStatus for the v2. For the v1, equipStatus in EQUIPMENT-MIB send a trap after been polled; For the v2, equipStatus is polled. Example values from LibreNMS test devices
| |||||||||||||
| SequipCptModif | 1.3.6.1.4.1.1038.107.12 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter for all equipments modifications. It represents the sum of the 7 other counters | |||||||||||||
| NcptModif | 1.3.6.1.4.1.1038.107.14 | ||||||||||||
| ScptSNC | 1.3.6.1.4.1.1038.107.14.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the SNC modifications. | |||||||||||||
| ScptCnx | 1.3.6.1.4.1.1038.107.14.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the Connexion modifications. | |||||||||||||
| ScptMSP | 1.3.6.1.4.1.1038.107.14.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the MSP modifications. | |||||||||||||
| ScptMsSpring | 1.3.6.1.4.1.1038.107.14.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the MS-SPRING modifications. | |||||||||||||
| ScptSynchro | 1.3.6.1.4.1.1038.107.14.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the Synchro modifications. | |||||||||||||
| ScptMngt | 1.3.6.1.4.1.1038.107.14.6 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the MNGT modifications (mngt list, password, trap, ...). | |||||||||||||
| ScptNet | 1.3.6.1.4.1.1038.107.14.7 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The counter version for the Network modifications. | |||||||||||||
| SequipManagerNumber | 1.3.6.1.4.1.1038.107.20 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current Number of manager = number of IP addresses in the table | |||||||||||||
| TequipManagerTable | 1.3.6.1.4.1.1038.107.21 | NA | |||||||||||
table · not-accessible · current Table containing Ip Addresses and maximum authorized level | |||||||||||||
| RequipManagerEntry | 1.3.6.1.4.1.1038.107.21.1 | NA | |||||||||||
row · not-accessible · current Entry containing IP addresses of managers allowed in R/W.
| |||||||||||||
| CequipManagerIndex | 1.3.6.1.4.1.1038.107.21.1.1 | INTEGER (0..2147483647) | RO | ||||||||||
column · INTEGER (0..2147483647) · read-only · current Index of equipManagerTable There's only 10 values in this table | |||||||||||||
| CequipManagerAddress | 1.3.6.1.4.1.1038.107.21.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of one of the allowed managers. If the table contains only address values which are equal to 0.0.0.0, no access filter are done. Write the IP address 0.0.0.0 to remove a manager. This operation can only be done by the iONOSANMsupervisor. | |||||||||||||
| CequipManagerADM | 1.3.6.1.4.1.1038.107.21.1.3 | SagemBoolean | RW | ||||||||||
column · SagemBoolean · read-write · current If 'true', this variable indicates that the manager defined by its address can have the Supervisor rigth as maximum level The value 'false' is set by the equipment when another level is choosen | |||||||||||||
| CequipManagerOPR | 1.3.6.1.4.1.1038.107.21.1.4 | SagemBoolean | RW | ||||||||||
column · SagemBoolean · read-write · current If 'true', this variable indicates that the manager defined by its address can have the Operator rigth as maximum level The value 'false' is set by the equipment when another level is choosen | |||||||||||||
| CequipManagerOBS | 1.3.6.1.4.1.1038.107.21.1.5 | SagemBoolean | RW | ||||||||||
column · SagemBoolean · read-write · current If 'true', this variable indicates that the manager defined by its address can have the Observer rigth as maximum level The value 'false' is set by the equipment when another level is choosen | |||||||||||||
| TtransferedItemTable | 1.3.6.1.4.1.1038.107.30 | NA | |||||||||||
table · not-accessible · current List of uploaded or downloaded Item from the equipment. | |||||||||||||
| RtransferedItemEntry | 1.3.6.1.4.1.1038.107.30.1 | NA | |||||||||||
row · not-accessible · current A particular Item transferd from/to the equipment.
| |||||||||||||
| CtransferedItemIndex | 1.3.6.1.4.1.1038.107.30.1.1 | INTEGER (0..2147483647) | RO | ||||||||||
| CtransferedItemType | 1.3.6.1.4.1.1038.107.30.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current used to know what kind of data to transferate, mainly programName or config | |||||||||||||
| CtransferedItemVersion | 1.3.6.1.4.1.1038.107.30.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current for a program, return the software version; for a config return the associated software version | |||||||||||||
| CtransferedItemComment | 1.3.6.1.4.1.1038.107.30.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current give additional information about the tranfered data | |||||||||||||
Traps / Notifications
- equipStatusTrap
1.3.6.1.4.1.1038.107.0.1