SAF-IPRADIO
SAF tehnikasnmptranslate -m SAF-IPRADIO -Tpsnmpwalk -v2c -c <community> -m SAF-IPRADIO <host> 1.3.6.1.4.1.7571Imports
| IF-MIB | ifEntry |
|---|---|
| RFC1155-SMI | Counter32, Gauge32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nsaf | 1.3.6.1.4.1.7571 | ||||||||||||||||
| Ntehnika | 1.3.6.1.4.1.7571.100 | ||||||||||||||||
| NmicrowaveRadio | 1.3.6.1.4.1.7571.100.1 | ||||||||||||||||
| NpointToPoint | 1.3.6.1.4.1.7571.100.1.1 | ||||||||||||||||
| Nsafip | 1.3.6.1.4.1.7571.100.1.1.5 | ||||||||||||||||
| NipRadio | 1.3.6.1.4.1.7571.100.1.1.5.1 | ||||||||||||||||
| NipRadioCfg | 1.3.6.1.4.1.7571.100.1.1.5.1.1 | ||||||||||||||||
| NipRadioCfgGeneral | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1 | ||||||||||||||||
| Sproduct | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.1 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory Name of the model. | |||||||||||||||||
| Sdescription | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.2 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory Description of the model. | |||||||||||||||||
| Shostname | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.3 | DisplayString (SIZE (0..16)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · mandatory The name of the host. | |||||||||||||||||
| SsysDateAndTime | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.4 | DateAndTime | RW | mandatory | |||||||||||||
scalar · DateAndTime · read-write · mandatory Current date and time set. For SET tenths of seconds ignored. | |||||||||||||||||
| SsysTemperature | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.5 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Unit temperature in degrees by Celsius. NB - sw before 2009.03.18 shows in *10 degrees | |||||||||||||||||
| Slicense | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.6 | DisplayString (SIZE (0..255)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · mandatory To set license information. Read allways 'OK'. | |||||||||||||||||
| SlicenseMask | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.7 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Read license mask. | |||||||||||||||||
| SlicenseUpdateStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.8 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Status of last license update operation by setting license using snmp.
| |||||||||||||||||
| TradioTable | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Radio table. | |||||||||||||||||
| RradioEntry | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1 | NA | mandatory | ||||||||||||||
| CradioIndex | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each radio. Its value represents UNIT: 1 - for 'local'; 2 - for 'remote'
| |||||||||||||||||
| CradioGenStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A General status of each radio: 1 - 'OK'; 2 - 'error' | |||||||||||||||||
| CradioSide | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Side for duplex communication.
| |||||||||||||||||
| CradioTxPower | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.4 | INTEGER | RW | mandatory | 18 | ||||||||||||
column · INTEGER · read-write · mandatory Tx power of radio transmitter in dBm. Example values from LibreNMS test devices
| |||||||||||||||||
| CradioRxLevel | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.5 | INTEGER | RO | mandatory | -46 | ||||||||||||
column · INTEGER · read-only · mandatory Received signal level in dBm. Example values from LibreNMS test devices
| |||||||||||||||||
| CradioDuplexShift | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.6 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Utilized duplex shift in KHz. | |||||||||||||||||
| CradioLoopback | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Radio loopback on/off. To set use loopback command.
| |||||||||||||||||
| CradioTxMute | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.8 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Status of 'Tx mute': 1 - Tx is muted; 2 - Tx is not muted.
| |||||||||||||||||
| CradioTxFrequency | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.9 | INTEGER | RW | mandatory | 11405000 | ||||||||||||
column · INTEGER · read-write · mandatory Tx frequency in kHz. Example values from LibreNMS test devices
| |||||||||||||||||
| CradioRxFrequency | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.10 | INTEGER | RO | mandatory | 10915000 | ||||||||||||
column · INTEGER · read-only · mandatory Rx frequency in kHz. Example values from LibreNMS test devices
| |||||||||||||||||
| TaTPCTable | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory ATPC table | |||||||||||||||||
| RaTPCEntry | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1 | NA | mandatory | ||||||||||||||
| CatpcIndex | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Its value represents UNIT 1 for 'local'; 2 for 'remote'.
| |||||||||||||||||
| CatpcEnabled | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.2 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory ATPC status:
1 for 'on';
2 for 'off'.
| |||||||||||||||||
| CatpcTxPowerCorrection | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory ATPC Tx power correction in dBm. | |||||||||||||||||
| TmodemTable | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory CFIP modem table. | |||||||||||||||||
| RmodemEntry | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1 | NA | mandatory | ||||||||||||||
| CmodemIndex | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Value represents UNIT: 1 for local; 2 for remote.
| |||||||||||||||||
| CmodemGeneralStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A General status of each modem: 1 - 'OK'; 2 - 'error' | |||||||||||||||||
| CmodemBandwith | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Modem bandwidth set in KHz. | |||||||||||||||||
| CmodemE1T1Channels | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Number of E1 or T1 channels set. | |||||||||||||||||
| CmodemModulation | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8*is_wide + 16*is_ACM).
Note: not all of listed modulations supported by hardware.
Plese check manual.
| |||||||||||||||||
| CmodemTotalCapacity | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6 | INTEGER | RO | mandatory | 363600 | ||||||||||||
column · INTEGER · read-only · mandatory Total capacity set in Kbps. Example values from LibreNMS test devices
| |||||||||||||||||
| CmodemEthernetCapacity | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Ethernet capacity set in Kbps. | |||||||||||||||||
| CmodemAcqStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8 | INTEGER | RO | mandatory | |||||||||||||
| CmodemLastAcqError | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||||||
| CmodemRadialMSE | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10 | INTEGER | RO | mandatory | -327 | ||||||||||||
column · INTEGER · read-only · mandatory Radial mean square error value *10 in dB.
Radial MSE is a method for estimating the
signal to noise ratio. ACM engine uses
normalized MSE, which is the inverse of SNR.
It is calculated by dividing the estimated
MSE level with the energy of the received
constellation. Radial MSE peak value threshold
is dependent on modulation used and LDPC
code rate.
In case of QPSK it is -8 dB (-10.5 for 'wide'),
16APSK - -13 dB (-18 for 'wide') and
32APSK - -15.5 dB (-21.5 for 'wide'). If the
value trespasses this threshold, BER at the
output of LDPC decoder will reach the value
of 1.0e-06.Example values from LibreNMS test devices
| |||||||||||||||||
| CmodemInternalAGCgain | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory dBm | |||||||||||||||||
| CmodemCarrierOffset | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Carrier frequency offset in Hz. | |||||||||||||||||
| CmodemSymbolRateTx | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory kHz | |||||||||||||||||
| CmodemSymbolRateRx | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory kHz | |||||||||||||||||
| CmodemLDPCdecoderStress | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory The load of LDPC (low-density
parity-check code) decoder.
The LDPC is monitored for the number
of errors being corrected on the input
of LDPC decoder.
LDPC stress value thresholds @ BER 1.0e-06:
- for standard settings ~4.0e-02;
- for 'wide' option ~ 1.0e-03.
As long as LDPC stress value is under the
specified thresholds, amount of errors (and
BER itself) on the output of LDPC remains
at zero level. | |||||||||||||||||
| CmodemACMengine | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Status of ACM engine. When 'on', value '1' is shown, when 'off' - value is '2'.
| |||||||||||||||||
| CmodemACMmodulationMin | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8*is_wide + 16*is_ACM).
Note: not all of listed modulations supported by hardware.
Plese check manual.
| |||||||||||||||||
| CmodemACMtotalCapacity | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18 | INTEGER | RO | mandatory | 363600 | ||||||||||||
column · INTEGER · read-only · mandatory Total capacity in Kbps set by ACM. Example values from LibreNMS test devices
| |||||||||||||||||
| CmodemACMethernetCapacity | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Ethernet capacity in Kbps set by ACM. | |||||||||||||||||
| CmodemStandard | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Modem operational standard ETSI or ANSI
| |||||||||||||||||
| CmodemE1T1ChannelMask | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory E1 or T1 channel mask 0x00 - 0x0f | |||||||||||||||||
| CmodemACMmodulationMax | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Modem modulation set.
Modulution values are
following: QPSK - 1, 8PSK - 2, 16QAM - 3,
32QAM - 4, 64QAM - 5, 128QAM - 6,
256QAM - 7.
The combination of wide band and ACM calculates as
(modulation + 8*is_wide + 16*is_ACM).
Note: as PSK modulations are now physicaly deprecated,
theese are replased with QAM, so for new QAM modulations
there are modificatior +32.
Note: not all of listed modulations supported by hardware.
Plese check manual.
| |||||||||||||||||
| CmodemRowStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Row status - to update written data for modemBandwith, modemACMmodulationMin, modemACMmodulationMax, modemE1T1ChannelMask.
| |||||||||||||||||
| SvlansEnabled | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.13 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory unit temperature *10 degrees Celsius
| |||||||||||||||||
| TvlanTable | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Vlan table | |||||||||||||||||
| RvlanEntry | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1 | NA | mandatory | ||||||||||||||
| CvlanNumber | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.1 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory A unique value for each vlan. | |||||||||||||||||
| CvlanPortType | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.2 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory VLAN port type management, traffic or endpoint
| |||||||||||||||||
| CvlanPortmap | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory display port bindings bitfield 111(bin) | |||||||||||||||||
| CvlanFid | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.4 | INTEGER | RO | optional | |||||||||||||
column · INTEGER · read-only · optional a filtering identifier (assigned automagically) | |||||||||||||||||
| CvlanCfgStat | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory enable/disable vlan # or clear row data
| |||||||||||||||||
| CvlanRowStatus | 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.6 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Row status (execute configuration on active) Changing any table value sets this value into state notReady. To update row status write value active(1) into this variable.
| |||||||||||||||||
| NipRadioCfgNetwork | 1.3.6.1.4.1.7571.100.1.1.5.1.1.2 | ||||||||||||||||
| SlocalIp | 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.1 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory IPv4 Ethernet address of the local unit in a number format(XXX.XXX.XXX.XXX) | |||||||||||||||||
| SlocalIpMask | 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.2 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory IPv4 Ethernet mask of the local unit in a number format (XXX.XXX.XXX.XXX) | |||||||||||||||||
| SremoteIp | 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.3 | IpAddress | RW | mandatory | |||||||||||||
scalar · IpAddress · read-write · mandatory IPv4 Ethernet address of the remote unit in a number format (XXX.XXX.XXX.XXX). | |||||||||||||||||
| NipRadioMgmt | 1.3.6.1.4.1.7571.100.1.1.5.1.2 | ||||||||||||||||
| SwriteConfig | 1.3.6.1.4.1.7571.100.1.1.5.1.2.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Write Config | |||||||||||||||||
| Srestartcpu | 1.3.6.1.4.1.7571.100.1.1.5.1.2.2 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Restart of Mng CPU. Values: 1 - 'cold' restart; 3 - sw | |||||||||||||||||
| Sloopbacks | 1.3.6.1.4.1.7571.100.1.1.5.1.2.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Set loopback for 1 minute. value error(1) is not writable.
Status of loopbacks.
Values:
1 - 'error' (not writable);
2 - 'off';
3 - 'rf' (radio frequency loopback); N/A 2008.10.21
4 - 'if' (intermediate frequency loopback);
5 - 'modem' (modem loopback);
6 - 'far' (far end loopback); N/A 2008.10.21
7 - 'ethernet' (Ethernet loopback); N/A 2008.10.21
8 - 'e1t1-1' (E1/T1 channel 1 loopback); N/A from firmware 1.51
9 - 'e1t1-2' (E1/T1 channel 2 loopback); N/A from firmware 1.51
10 - 'e1t1-3' (E1/T1 channel 3 loopback); N/A from firmware 1.51
11 - 'e1t1-4' (E1/T1 channel 4 loopback); N/A from firmware 1.51
12 - 'multi' (E1/T1 multi - look channel tributary mask)
| |||||||||||||||||
| Sloopback-tributary-mask | 1.3.6.1.4.1.7571.100.1.1.5.1.2.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Loopback mask for E1/T1 channels | |||||||||||||||||
| NipRadioStat | 1.3.6.1.4.1.7571.100.1.1.5.1.3 | ||||||||||||||||
| NipRadioStatEth | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2 | ||||||||||||||||
| SethRXTruncatedFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.1 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of truncated received frames since unit start or statistics reset. | |||||||||||||||||
| SethRXLongEvents | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.2 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames having byte count greater
than MAXIMUM FRAME SIZE parameter (1518,
1536 or 1916 bytes) since unit start or
statistics reset. | |||||||||||||||||
| SethRXVlanTagsDetected | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.3 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of VLAN Tags detected since unit start or statistics reset. | |||||||||||||||||
| SethRXUnsupOpcodes | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.4 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames recognized as control frames
but contained an Unknown Opcode since unit
start or statistics reset. | |||||||||||||||||
| SethRXPauseFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.5 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames received as control frames
with valid PAUSE opcodes since unit start or
statistics reset. | |||||||||||||||||
| SethRXControlFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.6 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames received as control frames since unit start or statistics reset. | |||||||||||||||||
| SethRXDribleNibbles | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.7 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Indicates that following the end of the
packet additional 1 to 7 bits are received.
A single nibble, named the dribble nibble,
is formed but not sent to the system; | |||||||||||||||||
| SethRXBroadcasts | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.8 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of packets, which destination
address contained broadcast address,
since unit start or statiistics reset. | |||||||||||||||||
| SethRXMulticasts | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.9 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of packets, which destination
address contained multicast address since
unit start or statistics reset. | |||||||||||||||||
| SethRXDones | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.10 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Reception of packets successfully
completed. Number of completed packets
since unit start or statistics reset. | |||||||||||||||||
| SethRXOutOfRangeErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.11 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames where Type/Length field
larger than 1518 (Type Field) bytes since
unit start or statistics reset. | |||||||||||||||||
| SethRXLengthCheckerrorsErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.12 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames where frame length field
in the packet does not match the actual data
byte length and is not a Type Field since
unit start or statistics reset. | |||||||||||||||||
| SethRXCRCErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.13 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames where frame CRC do not
match the internally generated CRC since
unit start or statistics reset | |||||||||||||||||
| SethRXCodeErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.14 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of packets where one or more nibbles
are signalled as errors during reception of
the packet since unit start or statistics
reset. | |||||||||||||||||
| SethRXFalseCarrierErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.15 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Indicates that following the last receive
statistics vector, a false carrier was
detected, noted and reported with this the
next receive statistics. The false carrier
is not associated with this packet. False
carrier is activated on the receive channel
that does not result in a packet receive
attempt being made; | |||||||||||||||||
| SethRXDvEvent | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.16 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of the last receive (Rx) events seen
being too short to be valid packets since the
last unit (re)start or purification of
statistics. | |||||||||||||||||
| SethRXPrevPktDropped | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.17 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Indicates that since the last receive (Rx),
a packet is dropped (i.e. interframe gap
too small). | |||||||||||||||||
| SethRXByteCounterHi | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.18 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total number of bytes received (Rx) on the
wire since the last unit (re)start or
purification of statistics, not counting
collided bytes (bits 31:0). | |||||||||||||||||
| SethRXByteCounterLow | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.19 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total number of bytes received (Rx) on the
wire since the last unit (re)start or
purification of statistics, not counting
collided bytes (bits 62:32). | |||||||||||||||||
| SethTXVlanTags | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.21 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of VLAN tagged Tx packets since the
last unit (re)start or purification of
statistics. 32-bit counter. | |||||||||||||||||
| SethTXBackpresEvents | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.22 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of times Tx carrier-sense-method
backpressure was previously applied since the
last unit (re)start or purification of
statistics. | |||||||||||||||||
| SethTXPauseFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.23 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames transmitted (Tx) as control
frames with valid PAUSE opcodes since the last
unit (re)start or purification of statistics. | |||||||||||||||||
| SethTXControlFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.24 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames transmitted (Tx) as control
frames since the last unit (re)start or
purification of statistics. | |||||||||||||||||
| SethTXWireByteCounterHi | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.25 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total number of bytes transmitted (Tx)
on the wire since the last unit (re)start
or purification of statistics, including
all bytes from collided attempts
(bits 31:0). | |||||||||||||||||
| SethTXWireByteCounterLow | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.26 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total number of bytes transmitted (Tx)
on the wire since the last unit (re)start
or purification of statistics, including
all bytes from collided attempts
(bits 62:32). | |||||||||||||||||
| SethTXUnderruns | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.28 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of underruns occured during frame
transmission (Tx) since the last unit
(re)start or purification of statistics. | |||||||||||||||||
| SethTXGiants | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.29 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx frames having byte count
greater than the MAXIMUM FRAME SIZE
parameter (1516, 1536 or 1916 bytes)
since the last unit (re)start or
purification of statistics. | |||||||||||||||||
| SethTXLateCollisions | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.30 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx collisions occurred beyond
the collision window (512 bit times) since
the last unit (re)start or purification
of statistics. | |||||||||||||||||
| SethTXMaxCollisions | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.31 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx packets aborted after number
of collisions exceeded the RETRANSMISSION
MAXIMUM parameter since the last unit
(re)start or purification of statistics. | |||||||||||||||||
| SethTXExcessiveDefers | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.32 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx packets deferred in excess
of 6,071 nibble times in 100 Mbps mode,
or 24,287 bit-times in 10 Mbps mode since
the last unit (re)start or purification
of statistics. | |||||||||||||||||
| SethTXNonExcessiveDefers | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.33 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx packets deferred for at
least one attempt, but less than an
excessive defer since the last unit
(re)start or purification of statistics. | |||||||||||||||||
| SethTXBroadcasts | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.34 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx packets since the last unit
(re)start or purification of statistics,
which destination address contained
broadcast address. | |||||||||||||||||
| SethTXMulticasts | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.35 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx packets since the last unit
(re)start or purification of statistics,
which destination address contained
multicast address. | |||||||||||||||||
| SethTXDones | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.36 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of packets successfully transmitted
(Tx) since the last unit (re)start or
purification of statistics. | |||||||||||||||||
| SethTXLengthCheckErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.38 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx frames since the last unit
(re)start or purification of statistics,
where length field in the packet does not
match the actual data byte length and is
not a Type Field | |||||||||||||||||
| SethTXCRCErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.39 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of Tx frames since the last unit
(re)start or purification of statistics,
where CRC does not match the internally
generated CRC. | |||||||||||||||||
| SethTXCollisions | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.40 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of collisions the current packet
incurred during transmission (Tx) attempts.
Note: Bits 19 through 16 are the collision
count on any successfully transmitted packet
and as such will not show the possible maximum
count of 16 collisions. | |||||||||||||||||
| SethTXByteCounterHi | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.41 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total count of bytes transmitted (Tx)
on the wire not including collided bytes
(bits 31:0) since the last unit (re)start
or purification of statistics. | |||||||||||||||||
| SethTXByteCounterLow | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.42 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total count of bytes transmitted (Tx)
on the wire not including collided bytes
(bits 62:32) since the last unit (re)start
or purification of statistics. | |||||||||||||||||
| SethGFPFCSErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.44 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of generic framing procedure (GFP)
frames with CRC errors received by the
de-encapsulation block since the last unit
(re)start or purification of statistics. | |||||||||||||||||
| SethGFPCHECErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.45 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of generic framing procedure (GFP)
frames with CHEC errors received by the
de-encapsulation block since the last unit
(re)start or purification of statistics. | |||||||||||||||||
| SethGFPDropedFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.46 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of generic framing procedure (GFP)
frames that were dropped in the de-encapsulation
block since the last unit (re)start or
purification of statistics. | |||||||||||||||||
| SethGFPDelineationErrors | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.47 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of 'lost of synchronization' events since
the last unit (re)start or purification of
statistics. | |||||||||||||||||
| SethQOSRXQ1Frames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.48 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames received on Q1 since the last unit (re)start or purification of statistics. | |||||||||||||||||
| SethQOSRXQ1Dropped | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.49 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames dropped on Q1 since the last unit (re)start or purification of statistics. | |||||||||||||||||
| SethQOSRXQ2Frames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.50 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames received on Q2 since the last unit (re)start or purification of statistics. | |||||||||||||||||
| SethQOSRXQ2Dropped | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.51 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames dropped on Q2 since the last unit (re)start or purification of statistics. | |||||||||||||||||
| SethQOSTXFrames | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.52 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames passed through TX FIFO since the last unit (re)start or purification of statistics. | |||||||||||||||||
| SethQOSTXDropped | 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.53 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Number of frames dropped in TX FIFO since the last unit (re)start or purification of statistics. | |||||||||||||||||
| Te1t1StatTable | 1.3.6.1.4.1.7571.100.1.1.5.1.3.3 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory E1 (T1) status Table. | |||||||||||||||||
| Re1t1StatEntry | 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1 | NA | mandatory | ||||||||||||||
| Ce1t1LOS | 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory if signal loss present
| |||||||||||||||||
| Ce1t1AIS | 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory if AIS present
| |||||||||||||||||
| Ce1t1ChannelNr | 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory e1 channel number (it is not associated with interface number - ifEntry) | |||||||||||||||||
| NmodemStatistics | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4 | ||||||||||||||||
| SmodemCountTime | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.1 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Count time in seconds | |||||||||||||||||
| SmodemErroredBlock | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.2 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Errored block | |||||||||||||||||
| SmodemErroredSecond | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.3 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Errored second | |||||||||||||||||
| SmodemSeverelyErroredSecond | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.4 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Severely errored second | |||||||||||||||||
| SmodemBackgroundBlockErrror | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.5 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Background Block Error | |||||||||||||||||
| SmodemTotalBlockNumber | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.6 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Total Block Number | |||||||||||||||||
| SmodemErroredSecondRatio | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.7 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Errored Second Ratio | |||||||||||||||||
| SmodemSeverelyErroredSecondRatio | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.8 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Severely Errored Second Ratio | |||||||||||||||||
| SmodemBackgroundBlockErrorRatio | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.9 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Background Block Error Ratio | |||||||||||||||||
| SmodemUptime | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.10 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Uptime (s) | |||||||||||||||||
| SmodemUnavailtime | 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.11 | Counter32 | RO | mandatory | |||||||||||||
scalar · Counter32 · read-only · mandatory Unavailtime (s) | |||||||||||||||||