RUCKUS-SZ-CONFIG-WLAN-MIB
Ruckus Wireless, Inc.Ruckus WLAN mib
snmptranslate -m RUCKUS-SZ-CONFIG-WLAN-MIB -Tpsnmpwalk -v2c -c <community> -m RUCKUS-SZ-CONFIG-WLAN-MIB <host> 1.3.6.1.4.1.25053.1.4.2.2Imports
| IANAifType-MIB | IANAifType |
|---|---|
| IPV6-TC | Ipv6Address |
| RUCKUS-ROOT-MIB | ruckusSZWLANModule |
| RUCKUS-TC-MIB | RuckusAdminStatus, RuckusRadioMode, RuckusRateLimiting, RuckusSSID, RuckusdB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IruckusSZConfigWLANMIB | 1.3.6.1.4.1.25053.1.4.2.2 | |||
identity Ruckus WLAN mib | ||||
| NruckusSZConfigWLANObjects | 1.3.6.1.4.1.25053.1.4.2.2.1 | |||
| NruckusSZConfigWLAN | 1.3.6.1.4.1.25053.1.4.2.2.1.1 | |||
| TruckusSZConfigWLANTable | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1 | NA | ||
table · not-accessible · current SZ WLAN table. | ||||
| RruckusSZConfigWLANEntry | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1 | NA | ||
| CruckusSZConfigWLANID | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.1 | INTEGER (0..65535) | RO | |
column · INTEGER (0..65535) · read-only · current this Wireless LAN(WLAN) ID | ||||
| CruckusSZConfigWLANSSID | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.2 | OCTET STRING (SIZE (2..32)) | RO | |
column · OCTET STRING (SIZE (2..32)) · read-only · current SSID for this Wireless LAN. | ||||
| CruckusSZConfigWLANDescription | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.3 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Description for this Wireless LAN. | ||||
| CruckusSZConfigWLANName | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.4 | OCTET STRING (SIZE (2..32)) | RO | |
column · OCTET STRING (SIZE (2..32)) · read-only · current Name for this Wireless LAN | ||||
| CruckusSZConfigWLANWLANServiceType | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The the Service type for the Wireless LAN.
| ||||
| CruckusSZConfigWLANAuthentication | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication method choosen for this Wireless LAN.
| ||||
| CruckusSZConfigWLANEncryption | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Encryption method choosen for this Wireless LAN.
| ||||
| CruckusSZConfigWLANWEPKeyIndex | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.15 | INTEGER (1..4) | RW | |
column · INTEGER (1..4) · read-write · current Select the WEP key index for the WEP encryption. for 802.1x wlan(eap), this node should not be set. | ||||
| CruckusSZConfigWLANWEPKey | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.16 | OCTET STRING (SIZE (10 | 26)) | RW | |
column · OCTET STRING (SIZE (10 | 26)) · read-write · current Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455 for 802.1x wlan(eap), this node should not be set. | ||||
| CruckusSZConfigWLANWPACipherType | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current Enter the encryption cipher method for the WPA encryption. For WPA2, aes is only supported. null is only for read
| ||||
| CruckusSZConfigWLANWPAKey | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.21 | OCTET STRING (SIZE (8..63 | 64)) | RW | |
column · OCTET STRING (SIZE (8..63 | 64)) · read-write · current Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii. for 802.1x wlan(eap), this node should not be set. | ||||
| CruckusSZConfigWLANSAEPassphrase | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.23 | OCTET STRING (SIZE (8..63 | 64)) | RW | |
column · OCTET STRING (SIZE (8..63 | 64)) · read-write · current Enter the The SAE Passphrase for WPA3 encryption. If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii. for 802.1x wlan(eap), this node should not be set. | ||||
| CruckusSZConfigWLANWirelessClientIsolation | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. for Guest and webauth WLAN type, it must be 'enable'.
| ||||
| CruckusSZConfigWLANZeroITActivation | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current Enable the Zero IT Activation Service of the Wireless LAN or not.
| ||||
| CruckusSZConfigWLANServicePriority | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current Select the QOS service priority for the Wireless LAN.
| ||||
| CruckusSZConfigWLANAccountingUpdateInterval | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.36 | INTEGER (1..60) | RW | |
column · INTEGER (1..60) · read-write · current Enter interval in minutes to update Accounting Server. | ||||
| CruckusSZConfigWLANVlanID | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.45 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged. | ||||
| CruckusSZConfigWLANHideSSID | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.50 | INTEGER | RW | |
column · INTEGER · read-write · current Hide SSID, not to broadcast it SSID.
| ||||
| CruckusSZConfigWLANMaxClientsPerAP | 1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.55 | INTEGER (1..512) | RW | |
column · INTEGER (1..512) · read-write · current Select the Number of client devices the AP can service for the Wireless LAN. | ||||