RS-XX8000-COMMON-MIB
ROHDE & SCHWARZ GmbH & Co.KGThis MIB defines general objects of XX8000 transmitting systems from Rohde & Schwarz. Use this MIB for things all transmitters support via SNMP, e.g.: - product information - installation / configuration issues (trapsinks, managers aso.) The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB.
snmptranslate -m RS-XX8000-COMMON-MIB -Tpsnmpwalk -v2c -c <community> -m RS-XX8000-COMMON-MIB <host> 1.3.6.1.4.1.2566.149.1.163Imports
| RS-COMMON-MIB | rsProdBroadcastTransmitter, rsRegModules |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NrsXx8000 | 1.3.6.1.4.1.2566.127.1.2.167 | ||||||||||||
node · current The subtree for all transmitters of series 8000. | |||||||||||||
| NrsXx8000Common | 1.3.6.1.4.1.2566.127.1.2.167.1 | ||||||||||||
node · current This is the subtree for values which every equipement of series 8000 suports. | |||||||||||||
| NrsXx8000CommonObjs | 1.3.6.1.4.1.2566.127.1.2.167.1.1 | ||||||||||||
| NproductInformation | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1 | ||||||||||||
| SserialNumber | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.2 | ReadableString | RO | 000000 | |||||||||
scalar · ReadableString · read-only · current The serial number of the device. Example values from LibreNMS test devices
| |||||||||||||
| SidentNumberSW | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.3 | ReadableString | RO | ||||||||||
scalar · ReadableString · read-only · current The Rohde&Schwarz identification number of the software, for example 2094.2090.02. | |||||||||||||
| SversionNumberSW | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.4 | ReadableString | RO | 1.46.2 | |||||||||
scalar · ReadableString · read-only · current The Rohde&Schwarz revision number of the software, for example 1.2.1. Example values from LibreNMS test devices
| |||||||||||||
| SidentNumberHW | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.5 | ReadableString | RO | ||||||||||
scalar · ReadableString · read-only · current The Rohde&Schwarz identification number of the hardware, for example 2095.8007.02 (NetCCU). | |||||||||||||
| SversionNumberHW | 1.3.6.1.4.1.2566.127.1.2.167.1.1.1.6 | ReadableString | RO | ||||||||||
scalar · ReadableString · read-only · current The Rohde&Schwarz revision number (product index) of the hardware, for example 03.03. | |||||||||||||
| NsnmpConfig | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2 | ||||||||||||
| TtrapSinkTable | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2 | NA | |||||||||||
table · not-accessible · current This table is for configuration of trapsinks - the IP-addresses where traps/informs are sent to. This table gives you possibility for easier remote configuration of trapsinks. Another way, which is predefined by IETF, is to use the MIBs SNMP-TARGET and SNMP-NOTIFICATION. | |||||||||||||
| RtrapSinkEntry | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1 | NA | |||||||||||
| CtrapSinkNumber | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current The arbitrary number in the list. | |||||||||||||
| CtrapSinkVersion | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The SNMP-version of sent out alarm. 1: v1Trap 2: v2Trap 3: v2Inform
| |||||||||||||
| CtrapSinkAddress | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP-Address of the SNMP manager to which the alarms are sent to. | |||||||||||||
| CtrapSinkPort | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.4 | Integer32 (1..65535) | RW | ||||||||||
column · Integer32 (1..65535) · read-write · current The port of the SNMP manager to which the alarms are sent to. | |||||||||||||
| CtrapSinkCommunity | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.5 | ReadableString | RW | ||||||||||
column · ReadableString · read-write · current community used in alarm | |||||||||||||
| CtrapSinkInformRetry | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.6 | Integer32 (1..255) | RW | ||||||||||
column · Integer32 (1..255) · read-write · current only used for informs: number of times to resend the inform | |||||||||||||
| CtrapSinkInformTimeout | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.7 | Integer32 (1..255) | RW | ||||||||||
column · Integer32 (1..255) · read-write · current only used for informs: timeout between retries
| |||||||||||||
| CtrapSinkInformUnacknowledged | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.8 | Integer32 (1..255) | RW | obsolete | |||||||||
column · Integer32 (1..255) · read-write · obsolete only used for informs: maximum number of waiting informs if this is reached, the oldest pending inform is discarded | |||||||||||||
| CtrapSinkUse | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.2.1.9 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current on/off-switch for this sink | |||||||||||||
| SsendTestTrap | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.3 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current 1: idle 2: Agent generates the trap 'testTrap', which is useful when checking the connection between agent (NetCCU) and your trapsink. | |||||||||||||
| SirtTrapsAllOn | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.4 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all IRT-traps on - traps for all events are sent out. In detail, this means in the IRT-MIBs under branches *EventEnable all OIDs are set to 1. Caution! Setting this value influences remote controlling of devices. Too many alarms may flood your network. Use this only for testing - for operation, we suggest switch on only a few important traps. | |||||||||||||
| SirtTrapsAllOff | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.5 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all IRT-traps off - no traps are sent out. In detail, this means in the IRT-MIBs under branches *EventEnable all OIDs are set to 2. Note: This is typically set when using only R&S-MIBs and you don't need IRT-MIBs. | |||||||||||||
| SrsTrapsAllOn | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.6 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps on - traps for all events (info, warning, fault) are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all OIDs are set to 1. Caution! Enabling all traps is not recommended! Caution! Setting this value influences remote controlling of devices! Too many alarms may flood your network. Use this only for testing - for operation, we suggest switch on only a few important traps. Caution! This enables absolutely all R&S alarms! Make sure you can handle it (network speed, routers, firewalls, NOC database performance etc.). | |||||||||||||
| SrsTrapsAllOff | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.7 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps off - no traps are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all OIDs are set to 2. Note: This is typically set when using only IRT-MIBs and you don't need R&S-MIBs. | |||||||||||||
| SrsTrapsAllFaultsOn | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.8 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps for faults on - traps for all 'faults' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all 'fault'-OIDs are set to '1'. These traps include the value 'fault(1)' in binding 'eventAlarmClass'. Note: This is the recommended setting when using R&S-MIBs. It gives you an overview of the device state. | |||||||||||||
| SrsTrapsAllFaultsOff | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.9 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps for faults off - no traps for 'faults' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all 'fault'-OIDs are set to '2'. These traps include the value 'fault(1)' in binding 'eventAlarmClass'. | |||||||||||||
| SrsTrapsAllWarningsOn | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.10 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps for warnings on - traps for all 'warnings' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all 'warning'-OIDs are set to '1'. These traps include the value 'warning(2)' in binding 'eventAlarmClass'. Note: This is the recommended setting when using R&S-MIBs and you want much more informations from the device than only faults. Caution! This enables lots of alarms. Make sure you can handle it (network speed, NOC database performance etc.)... | |||||||||||||
| SrsTrapsAllWarningsOff | 1.3.6.1.4.1.2566.127.1.2.167.1.1.2.11 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current This switches all R&S-traps for warnings off - no traps for 'warnings' are sent out. In detail, this means in the R&S-MIBs under *Events - Events*Table in column event*Mask all 'warning'-OIDs are set to '2'. These traps include the value 'warning(2)' in binding 'eventAlarmClass'. | |||||||||||||
| NtransmitterConfig | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3 | ||||||||||||
| SdateTime | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.1 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current The date and time for the transmitter.
Notes: Deci-seconds different from 0 are ignored.
The range of distance from UTC is -12h..+14h.
Omitting the optional UTC fields in a set-request results in keeping the
old UTC offset values. | |||||||||||||
| Nntp | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2 | ||||||||||||
| SntpMode | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures the working mode of the NTP client. disabled: no ntp synchronisation will be done step: the time will synchronized every NTP sync-time unknown: NTP mode is currently not determinable. This value must not be written.
| |||||||||||||
| SntpSyncTimeInterval | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.2 | Integer32 (6..1440) | RW | ||||||||||
scalar · Integer32 (6..1440) · read-write · current Set the intervall, how often the NTP client will be synchronized to the NTP server. Note: this is useful in step mode only .
| |||||||||||||
| TntpServerAddrTable | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3 | NA | |||||||||||
table · not-accessible · current Table with server adresses. Currently maximal one entry is allowed. | |||||||||||||
| RntpServerAddrEntry | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1 | NA | |||||||||||
| CntpServerAddrIdx | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current index for table entry. | |||||||||||||
| CntpServerAddress | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.3.1.2 | ReadableString | RW | ||||||||||
column · ReadableString · read-write · current host name or IP address of server. | |||||||||||||
| SntpState | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Shows the actual state of the NTP synchronisation.
| |||||||||||||
| SntpLastSync | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.2.5 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The date/time of the last successful synchronisation. | |||||||||||||
| NswMaintenance | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5 | ||||||||||||
| Srestart | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.1 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current Restart the software of transmitter's control unit. | |||||||||||||
| NswUpdate | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5 | ||||||||||||
| SswUpdateStart | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.2 | Trigger | RW | ||||||||||
scalar · Trigger · read-write · current Start software update tool at transmitter side in manual mode. The PC tool can only connect to transmitter's control unit if the software update tool on the transmitter is started. | |||||||||||||
| SswUpdateMode | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Run mode of the software update tool at the transmitter side.
manual: Software update can be started with the Start button. It will stop automaticly after
an idle period of 90 seconds.
permanent: Software update is always running and will never stop.
| |||||||||||||
| SswUpdateDeviceName | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.4 | ReadableString (SIZE (0..30)) | RW | ||||||||||
scalar · ReadableString (SIZE (0..30)) · read-write · current The Device Name is dedicated to this control unit. It will be shown in the software update tool on the PC to differ devices. | |||||||||||||
| SswUpdateDeviceGroup | 1.3.6.1.4.1.2566.127.1.2.167.1.1.3.5.5.5 | ReadableString (SIZE (0..30)) | RW | ||||||||||
scalar · ReadableString (SIZE (0..30)) · read-write · current The Device Group can be used to separate devices in large networks. It must match the Device Group in software update tool on the PC. | |||||||||||||
| NrsXx8000CommonEvents | 1.3.6.1.4.1.2566.127.1.2.167.1.2 | ||||||||||||
| NrsXx8000EventsV2 | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0 | ||||||||||||
| !testTrap | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.1 | ||||||||||||
notification · current This trap is sent to check whether the trapsink is receiving any traps from this agent. To trigger this trap, set 'sendTestTrap' to '2'.
| |||||||||||||
| NeventTx | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10 | ||||||||||||
| NeventsTxV2 | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0 | ||||||||||||
node · current Compatibility to SMIv1. | |||||||||||||
| !swUpdateStarted | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.1 | ||||||||||||
notification · current Software update started. The PC tool can only connect to transmitter's control unit if the software update tool on the transmitter is started. It uses the network 17 (TCP and UDP).
| |||||||||||||
| !ntpSyncFailed | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.2 | ||||||||||||
notification · current NTP synchronisation failed.
| |||||||||||||
| TeventsTxTable | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1 | NA | |||||||||||
table · not-accessible · current This table contains necessary information for handling alarms. For each alarm you have the following information: - name (get), - mask to enable/disable sending out (set/get), - priority (set/get) and - the current state (get only). | |||||||||||||
| ReventsTxEntry | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1 | NA | |||||||||||
row · not-accessible · current An event entry always consists of 3 values: - name: an enumerated list of all possible notifications - mask: the corresponding mask (enable/disable) - priority: the corresponding priority (value in range 0..255) - event: the event itself (active/inactive)
| |||||||||||||
| CeventTxNameIdx | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.1 | EventMaxEntryNumber | NA | ||||||||||
column · EventMaxEntryNumber · not-accessible · current The event number as integer. This is a helper column and therefore not-accessible. | |||||||||||||
| CeventTxName | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The event number as integer and the value as readable text. The enumeration correlates with the notifications under eventsTxV2.
| |||||||||||||
| CeventTxMask | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.3 | EventMask | RW | ||||||||||
column · EventMask · read-write · current See TextualConvention for details. | |||||||||||||
| CeventTxPriority | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.4 | EventPriority | RW | ||||||||||
column · EventPriority · read-write · current See TextualConvention for details. | |||||||||||||
| CeventTxEvent | 1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.1.1.5 | EventState | RO | ||||||||||
column · EventState · read-only · current See TextualConvention for details. | |||||||||||||
| NeventHistory | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1 | ||||||||||||
node · current Information about sent out events. | |||||||||||||
| ScounterEvents | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The total number of traps sent out. This is an increasing value. | |||||||||||||
| TeventHistoryTable | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2 | NA | |||||||||||
table · not-accessible · current The table of the last 100 messages sent out. | |||||||||||||
| ReventHistoryEntry | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1 | NA | |||||||||||
| CeventHistoryNumber | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The trap number. | |||||||||||||
| CeventHistoryModule | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This column indicates the physical module the corresponding message is for.
| |||||||||||||
| CeventHistoryEvent | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This column indicates the event. In correlation with column eventHistoryModule, you can see the name of the event here. For this, you need to have a look at the event definitions of the corresponding MIB. Example: For a DVB transmitter an entry in eventHistoryModule is netccu(2) and the value in eventHistoryEvent is 1. A look at eventsTxV2 of RS-XX8000-DVB-TX-MIB shows, 1 is txSummaryFault. | |||||||||||||
| CeventHistoryEventState | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.4 | EventState | RO | ||||||||||
column · EventState · read-only · current See TextualConvention for details. | |||||||||||||
| CeventHistoryEventDate | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current This column indicates the date and time of the event. | |||||||||||||
| CeventHistoryTx | 1.3.6.1.4.1.2566.127.1.2.167.1.2.1.2.1.101 | IndexTransmitter | RO | ||||||||||
column · IndexTransmitter · read-only · current The transmitter index in case of NTx or Np1 systems. For variants with one transmitter only (SingleTx) this index is always transmitterB(1). | |||||||||||||
| NeventMapObjects | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3 | ||||||||||||
| SeventAlarmPriority | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.1 | EventPriority | AN | ||||||||||
scalar · EventPriority · accessible-for-notify · current This OID holds the value for the priority when sending out a notification. | |||||||||||||
| SeventAlarmClass | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.2 | EventClass | AN | ||||||||||
scalar · EventClass · accessible-for-notify · current See TextualConvention for details. | |||||||||||||
| SeventEvent | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.3 | EventState | AN | ||||||||||
scalar · EventState · accessible-for-notify · current This OID holds the value for the event itself when sending out a notification. | |||||||||||||
| SindexTransmitter | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.4 | IndexTransmitter | AN | ||||||||||
scalar · IndexTransmitter · accessible-for-notify · current This OID holds the value for the transmitter when sending out a notification. | |||||||||||||
| SindexAB | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.5 | IndexAB | AN | ||||||||||
scalar · IndexAB · accessible-for-notify · current This OID holds the value for the module A (exciterA, outputstageA) or B (exciterB, outputstageB) when sending out a notification. | |||||||||||||
| SindexRack | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.6 | IndexRack | AN | ||||||||||
scalar · IndexRack · accessible-for-notify · current This OID holds the value for the rack when sending out a notification. | |||||||||||||
| SindexAmplifier | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.7 | IndexAmplifier | AN | ||||||||||
scalar · IndexAmplifier · accessible-for-notify · current This OID holds the value for the amplifier when sending out a notification. | |||||||||||||
| SindexProgram | 1.3.6.1.4.1.2566.127.1.2.167.1.2.3.8 | IndexProgram | AN | ||||||||||
scalar · IndexProgram · accessible-for-notify · current This object holds the value for the program when sending out a notification. | |||||||||||||
| NrsXx8000CommonConf | 1.3.6.1.4.1.2566.127.1.2.167.1.3 | ||||||||||||
| NrsXx8000CommonGroups | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1 | ||||||||||||
| GgroupNotifyTest | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.1 | ||||||||||||
| GgroupNotify | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.2 | ||||||||||||
| GgroupEventTest | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.6 | ||||||||||||
| GgroupEventHistory | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.8 | ||||||||||||
group · current Contains all objects from 'eventHistory'. | |||||||||||||
| GgroupEventObjects | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.9 | ||||||||||||
group · current Contains all objects from 'eventMapObjects'. | |||||||||||||
| GgroupProductInformation | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.11 | ||||||||||||
group · current Contains all objects from 'productInformation' (R&S typeplate). | |||||||||||||
| GgroupSnmpConfig | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.12 | ||||||||||||
group · current Contains all objects from 'snmpConfig'. | |||||||||||||
| GgroupTransmitterConfig | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.13 | ||||||||||||
| GgroupNTP | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.14 | ||||||||||||
group · current objects from 'ntp' | |||||||||||||
| GgroupSwMaintenance | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.15 | ||||||||||||
group · current objects from 'swMaintenance' | |||||||||||||
| GgroupNotifyNTP | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.16 | ||||||||||||
| GgroupObsoletedObjects | 1.3.6.1.4.1.2566.127.1.2.167.1.3.1.17 | obsolete | |||||||||||
| NrsXx8000CommonCompls | 1.3.6.1.4.1.2566.127.1.2.167.1.3.2 | ||||||||||||
| Mxx8000BasicCompliance | 1.3.6.1.4.1.2566.127.1.2.167.1.3.2.1 | ||||||||||||
compliance · current The compliance statement for XX8000 entities which implement this MIB module. | |||||||||||||
| IrsXx8000MibModule | 1.3.6.1.4.1.2566.149.1.163 | ||||||||||||
identity This MIB defines general objects of XX8000 transmitting systems from Rohde & Schwarz. Use this MIB for things all transmitters support via SNMP, e.g.: - product information - installation / configuration issues (trapsinks, managers aso.) The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB. | |||||||||||||
Textual conventions
AtvStandardINTEGERb(12)bg(1)dk(5)dkfm2(8)g(13)h(11)i(6)i1(7)k1(10)l(9)m(2)m1(3)n(4)The ATV standards.
EqualizerCalibrationStateINTEGERactive(2)fail(4)inactive(1)warning(3)possible precorrection equalizer calibration states
EventClassINTEGERfault(1)info(3)warning(2)These are the levels of events a transmitter has. Info(3): Are events which only inform about changes, e.g. 'local/remote' or 'reboot of the control unit'. They don't affect the transmission. Warning(2): Are minor problems which do not influence transmission itself, but may cause a bigger problem when no action is taken, e.g. 'RF Loop Program'. Warnings may appear and disappear without the need of acknowledgment. Fault(1): Have a direct impact on the transmission, e.g. 'failure power supply'. Faults never disappear without acknowledgment.
EventMaskINTEGERdisable(2)enable(1)Enables / Disables this event. enable(1) --> active, will be sent in case the event occurs disable(2) --> inactive, will not be sent in case the event occurs.
EventMaxEntryNumberInteger32 (1..999)The maximum number of events. This is used in other MIBs as a placeholder.
EventPriorityInteger32 (0..255)The priority of the event. Users can freely set this value in range 0..255.
EventStateINTEGERactive(1)inactive(2)The current state of an event: active(1) --> event is active (coming) inactive(2) --> event is inactive (going) This is used in all logbooks and in all event handling tables.FailDelayModeINTEGERalways(1)ifQualified(2)The mode how fail delay is handled. always(1) - the fail delay action is always carried out after the user specified fail delay time. ifQualified(2) - the fail delay action is carried out after the user specified fail delay time only if the FailDelayStatus is ok(3). Otherwise (Fail DelayStatus warning(2)) 30 minutes after GPS was lost a reference fault is signaled and the input is muted.FailDelayStatusINTEGERoff(1)ok(3)warning(2)The current state of time drift prediction. off(1) - not used warning(2) - Availability of GPS not sufficient for time drift prediction ok(3) - Time drift prediction is functional.
FloatingPointOCTET STRING (SIZE (1..63))FloatingPoint provides a way of representing non-integer numbers in SNMP. Numbers are represented as a string of ASCII characters in the natural way. So for example, '3', '3.142' and '0.3142E1' are all valid numbers. The syntax for the string is as follows. [] enclose an optional element, | is the separator for a set of alternatives. () enclose syntax which is to be viewed as a unit. FloatingPoint ::= [Sign] (Float1 | Float2 | DigitSequence) [ExponentPart] Float1 ::= DigitSequence '.' [DigitSequence] Float2 ::= '.' DigitSequence DigitSequence ::= Digit [DigitSequence] ExponentPart ::= ('e' | 'E') [Sign] DigitSequence Digit ::= '0'..'9' Sign ::= '+' | '-'IndexABINTEGERa(1)b(2)The value for the module A (exciterA, outputstageA) or B (exciterB, outputstageB) for alarms. This is a helper column.
IndexAmplifierInteger32 (1..10)This is used to display a designated amplifier.
IndexProgramINTEGERprogram1(2)program2(3)program3(4)program4(5)program5(6)program6(7)program7(8)program8(9)programRes(1)This is used for Nplus1 systems to indicate a program sent out (logical view). ProgramRes(1) is the reserve program, program1(2) to program8(9) are the main programs. In difference to the physical view, programRes(1) has no special parameters available. Furthermore it has no priority.
IndexRackInteger32 (1..10)This is used for systems with more than 1 rack to display a designated rack.
IndexTransmitterINTEGERtransmitterA1(2)transmitterA2(3)transmitterA3(4)transmitterA4(5)transmitterA5(6)transmitterA6(7)transmitterA7(8)transmitterA8(9)transmitterB(1)This is used for Nplus1 systems to indicate a transmitter (physical view). TransmitterB(1) is the reserve transmitter, transmitterA1(2) to transmitterA8(9) are the main transmitter. In difference to the logical view, transmitterB(1) has special parameters available.
InputSourceINTEGERbnc(1)ip(4)iq(9)reserved(5)rx(2)sat(3)t2Mi(8)tp(6)vf(7)input source selection type
LockStateINTEGERlocked(1)unlocked(2)This is for carrier locking.
LogbookEntryMessagesExcATVINTEGERamplifierOverflow(119)aud1InpClip(68)aud2InpClip(69)aud2OutClip(72)audioLoopOpen(77)audioMode(59)biosUpdated(15)carrierLock(28)clippingAntennaInput(57)delayChanged(108)devLimAud1(65)devLimAud2(66)exciterOn(4)extPpsFail(103)extRefFail(101)extRefWeak(102)fans(18)fifoOverUnderFlow(107)fpgaConfig(40)hwCfCard(20)hwEEPROM(23)hwIifBoard(41)hwMainboard(19)hwRfBoard(42)hwSynth1(43)hwSynth2(44)hwSynth3(45)inputFail(30)local(3)loopOpen(26)maxDelayChanged(114)mute(9)muteAudio1(46)muteAudio2(47)nicam728Carr(71)nicam728Data(70)noCcuComm(13)noFPGA(27)noHeadroomAntenna(58)noInput(6)noMIP(110)noPPS(116)oneFan(12)optionExpired(37)optionWillEnd(38)outputOpen(21)packetUnlock(113)powerSupply(16)reboot(0)reference(7)referenceAbsent(115)relieveReq(10)rfAudio1Fail(75)rfAudio2Fail(76)rfFail(25)rfFailAmplifier(117)rfMonFail(73)rfOk(5)rfOn(8)rfOutAntA1(54)rfOutAntA2(56)rfOutAntV(52)rfOutExcA1(53)rfOutExcA2(55)rfOutExcV(51)rfVideoFail(74)summaryFault(1)summaryWarning(2)swUpdated(14)syncCheck(63)synthesizerUnlocked(127)temperature(17)testMode(100)videoInput1(48)videoInput2(49)videoInputAct(50)videoInputClipping(67)videoLoopOpen(78)warningAmplifier(118)whiteLimiter(64)whiteLine(60)whiteLineLnAmp(61)whiteLineLnAmpW(62)wrongConfig(104)wrongDatarate(106)wrongDelay(109)wrongMfArrivalTime(111)Inserted information in the logbook of ATV exciters. This is obsolete! Please use LogbookEntryMessagesExcTv!
LogbookEntryMessagesExcDVBINTEGERexcBoardTemperature(17)excCarrierLock(28)excExtDelayChanged(108)excExtPPSAsynchron(112)excExtPPSFail(103)excExtRefFail(101)excExtRefWeak(102)excFanFault(18)excFanWarning(12)excFifoWarning(107)excHwCfCard(20)excHwEeprom(23)excHwFpgaConfig(40)excHwIifBoard(41)excHwRfBoard(42)excHwSynth1(43)excHwSynth2(44)excHwSynth3(45)excInputFail(105)excInputFault(30)excLocal(3)excLoop(26)excMaxDelayChanged(114)excMute(9)excNoCommunicationToNetCCU(13)excNoInput(6)excNoMIP(110)excNoPPS(116)excNoReference(115)excOn(4)excOptionExpired(37)excOptionExpires(38)excOutputOpen(21)excOverflowAmplifier(119)excPacketUnlock(113)excPowerSupply(16)excReboot(0)excReferenceFail(7)excRfFail(25)excRfFailAmplifier(117)excRfOk(5)excRfOn(8)excSelfTest(19)excSummaryFault(1)excSummaryWarning(2)excSynthUnlock(127)excTestMode(100)excWarningAmplifier(118)excWrongConfig(104)excWrongDatarate(106)excWrongDelay(109)excWrongMFArrivalTime(111)Inserted information in the logbook of DVB exciters. This is obsolete! Please use LogbookEntryMessagesExcTv!
LogbookEntryMessagesExcFMINTEGERexc12VFanWarning(67)exc12VRackControllerWarning(71)excAESNoClock(102)excAESParityBiphaseError(103)excAESStateNotValid(104)excBiosUpdated(15)excCarrierLock(28)excEEPROMError(23)excFPGANotLoaded(27)excFan1NotOk(47)excFan2NotOk(48)excInfoFrequencyChanged(81)excInpAutomaticActive(109)excInpCh1Active(107)excInpCh1NotOk(105)excInpCh2Active(108)excInpCh2NotOk(106)excInputFault(30)excLevelAESLeftTooHigh(93)excLevelAESLeftTooLow(84)excLevelAESRightTooHigh(94)excLevelAESRightTooLow(85)excLevelAFLeftTooHigh(97)excLevelAFLeftTooLow(88)excLevelAFRightTooHigh(98)excLevelAFRightTooLow(89)excLevelAUX1TooHigh(99)excLevelAUX1TooLow(90)excLevelAUX2TooHigh(100)excLevelAUX2TooLow(91)excLevelAUX3TooHigh(101)excLevelAUX3TooLow(92)excLevelMPXTooHigh(95)excLevelMPXTooLow(86)excLocal(3)excLoop(26)excMainCLKUnlocked(51)excMainPLLUnlocked(49)excMainUPCUnlocked(50)excMute(9)excNoCommunicationToNetCCU(13)excNoDataInput(87)excNoInput(6)excOn(4)excOptionKeyExpired(37)excOptionKeyWarning(38)excOutputOpen(21)excPowerSupply(16)excReboot(0)excReferenceFail(7)excRfFail(25)excRfOk(5)excRfOn(8)excRfUnitFault(43)excSoftFault(33)excSummaryFault(1)excSummaryWarning(2)excTemperatureFault(42)excTemperatureWarning(41)ostNoConnection(125)ostNoInput(118)ostPowerRegulationActive(121)ostRfFault(117)ostRfPresent(112)ostRfWarn(116)ostSoftFault(34)ostSummaryFault(32)ostSummaryWarning(36)ostSwrFault(124)ostSwrWarning(123)ostTemperatureWarning(122)recCarrierNotPresent(114)recNoConnection(115)recRfFault(119)recRfPresent(120)recRfWarning(113)recSummaryFault(111)recSummaryWarning(110)Inserted information in the logbook of FM exciters.
LogbookEntryMessagesExcTvINTEGERautoCtrlExcActive(802)autoPrgmExcActive(803)autoPrgmExcFault(808)autoPrgmExcNoConnect(807)automaticFault(801)automaticOn(800)automaticReady(806)changeoverByAuto(805)changeoverByUser(804)dvbT2UnsupportedConfiguration(502)dvbt2BandwidthMismatch(503)dvbt2InvalidConfiguration(501)dvbt2NoL1Present(500)exc10MHzReference(223)exc5MHzReference(222)excAmpOverflow(119)excAmpReducedPower(175)excAmpRegulation(173)excAmpTempFault(172)excAmpTempWarn(171)excAmpTransistor(174)excAmpVSWR(170)excAud1InpClip(68)excAud2InpClip(69)excAud2OutClip(72)excAudioLoopOpen(77)excAudioMode(59)excBiosUpdated(15)excCarrierLock(28)excClippingAntInp(57)excCrcViolationRateTooHigh(411)excDelayChanged(108)excDevLimAud1(65)excDevLimAud2(66)excEchoWarning(214)excExciterOn(4)excExt1PPSReference(220)excExtPPSAsynchron(112)excExtPPSFail(103)excExtRefFail(101)excExtRefWeak(102)excFLOModErr(121)excFPGAConfig(40)excFans(18)excFifoOverUnderflow(107)excFramecounter(240)excHWAmpEEPROM(176)excHwCfCard(20)excHwEEPROM(23)excHwIIFBoard(41)excHwMainboard(19)excHwRfBoard(42)excHwSynth1(43)excHwSynth2(44)excHwSynth3(45)excInput1(122)excInput1Available(320)excInput1LP(124)excInput1LPAvailable(322)excInput2(123)excInput2Available(321)excInput2LP(125)excInput2LPAvailable(323)excInputFail(30)excInputFail2(105)excInputFail3(212)excInputSwitched(104)excInputWarning(213)excInt1PPSReference(221)excInvalidTII(403)excLocal(3)excLoopOpen(26)excMaxDelayChanged(114)excMissingIIP(241)excMissingSIP(205)excModConfigChanged(194)excModCoreReset(193)excModCoreStall(190)excModError(120)excModFIFOParErr(182)excModFIFOSeqErr(183)excModIdleMode(196)excModIqInactive(191)excModLofTS1(188)excModLofTS2(189)excModMemError(198)excModMtiVersErr(192)excModSfnBufEmpty(184)excModSfnBufFull(185)excModSfnRAMInitErr(180)excModSsfMissing(187)excModSsfMultiple(186)excModTransportErr(181)excMonAUXBadInputSignal(274)excMonAUXHWError(272)excMonAUXNoFrontendLock(273)excMonBadInputSignal(266)excMonHWError(260)excMonNoFrontendLock(263)excMonNoInputSignal(269)excMonitorNoInputFail(280)excMute(9)excMuteAudio1(46)excMuteAudio2(47)excNICAM728Carr(71)excNICAM728Data(70)excNSUConnected(256)excNoCCUComm(13)excNoFPGA(27)excNoHeadroomAnt(58)excNoInput(6)excNoMIP(110)excNoMobileDtvContent(301)excNoPPS(116)excNoReserveAvailable(126)excNoSfnData(300)excNullTIST(407)excOneFan(12)excOptionExpired(37)excOptionWillEnd(38)excOutputOpen(21)excPRBSInsertion(401)excPSUOvertemp(250)excPacketUnlock(113)excPowerSupply(16)excPowerSupplyWarning(251)excPrecorrectionSetupFail(231)excPrecorrectionSetupInfo(230)excRFWarningAmp(177)excReboot(0)excRebootRqst(22)excRecvAUXBadInputSignal(267)excRecvAUXNoFrontendLock(264)excRecvAUXWarningInputSignal(270)excRecvBadInputSignal(268)excRecvHWError(262)excRecvNoFrontendLock(265)excRecvRxAUXHWError(261)excRecvWarningInputSignal(271)excReference(7)excReferenceAbsent(115)excRelieveReq(10)excRfAudio1Fail(75)excRfAudio2Fail(76)excRfFail(25)excRfFailAmplifier(117)excRfMonFail(73)excRfOk(5)excRfOn(8)excRfOutAntA1(54)excRfOutAntA2(56)excRfOutAntV(52)excRfOutExcA1(53)excRfOutExcA2(55)excRfOutExcV(51)excRfTest(400)excRfVideoFail(74)excSFNBuffer(195)excSFNBufferTooEmpty(197)excSFNDelay(109)excSFNIdleRegulation(128)excSeamlessReady(412)excSfnBufferTooFull(199)excSumFault(1)excSumWarning(2)excSwDiag(11)excSwUpdated(14)excSyncCheck(63)excSynthesizerUnlocked(127)excTCLevelOutOfRange(210)excTCLevelOverflow(211)excTIIChange(406)excTIITransmission(404)excTISTJitter(408)excTS1FrameLock(409)excTS2FrameLock(410)excTemperature(17)excTestEnsemble(402)excTestFIC(413)excTestMode(100)excTxModeChange(405)excVideoInp1(48)excVideoInp2(49)excVideoInpAct(50)excVideoInpClip(67)excVideoLoopOpen(78)excWarningAmplifier(118)excWatchdog(24)excWhiteLimiter(64)excWhiteLine(60)excWhiteLineLnAmp(61)excWhiteLineLnAmpW(62)excWrongDatarate(106)excWrongMFArrivalTime(111)iqHeader1Integrity(550)iqHeader1Issues(552)iqHeader2Integrity(551)iqHeader2Issues(553)iqInputOrder(557)iqInputRegulation(554)iqTseMute(556)iqWrongConfiguration(555)pa3ACFault(706)pa3BlowerFault(707)pa3Communication(716)pa3DriverFault(709)pa3PowerFault(713)pa3RFinFault(710)pa3Reflection(711)pa3Regulation(714)pa3ReserveSupplyFault(705)pa3ReserveSupplyTooHot(702)pa3Supply1Fault(703)pa3Supply1TooHot(700)pa3Supply2Fault(704)pa3Supply2TooHot(701)pa3Temperature(715)pa3TransistorFault(708)pa3Update(717)pa3VSWR(712)pa4ACFault(731)pa4BlowerFault(732)pa4Communication(741)pa4DriverFault(734)pa4PowerFault(738)pa4RFinFault(735)pa4Reflection(736)pa4Regulation(739)pa4ReserveSupplyFault(730)pa4ReserveSupplyTooHot(727)pa4Supply1Fault(728)pa4Supply1TooHot(725)pa4Supply2Fault(729)pa4Supply2TooHot(726)pa4Temperature(740)pa4TransistorFault(733)pa4Update(742)pa4VSWR(737)parIoExcLink(605)parIoGpIoLink(607)parIoTxLink(606)preAmpRFFault(604)preAmpTemperatureFault(603)rfBoardRFFault(608)sx801AmplShutdown(644)sx801PA1AcFail(656)sx801PA1BlowerFail(657)sx801PA1Communication(666)sx801PA1DriverFail(659)sx801PA1PowerFail(663)sx801PA1Reflection(661)sx801PA1Regulation(664)sx801PA1ReserveSupplyFail(655)sx801PA1ReserveSupplyTooHot(652)sx801PA1RfInFail(660)sx801PA1Supply1Fail(653)sx801PA1Supply1TooHot(650)sx801PA1Supply2Fail(654)sx801PA1Supply2TooHot(651)sx801PA1Temperature(665)sx801PA1TransistorFail(658)sx801PA1Update(667)sx801PA1VSWR(662)sx801PA2AcFail(681)sx801PA2BlowerFail(682)sx801PA2Communication(691)sx801PA2DriverFail(684)sx801PA2PowerFail(688)sx801PA2Reflection(686)sx801PA2Regulation(689)sx801PA2ReserveSupplyFail(680)sx801PA2ReserveSupplyTooHot(677)sx801PA2RfInFail(685)sx801PA2Supply1Fail(678)sx801PA2Supply1TooHot(675)sx801PA2Supply2Fail(679)sx801PA2Supply2TooHot(676)sx801PA2Temperature(690)sx801PA2TransistorFail(683)sx801PA2Update(692)sx801PA2VSWR(687)sx801PhaseError(640)sx801PowerFail12V(602)sx801PowerFail7Vnegative(601)sx801PowerFail7Vpositive(600)sx801ReflectionFault(642)sx801ReflectionWarning(641)sx801RfWarning(643)tse800Fault(772)tse800NoConnect(770)tse800Warning(771)xlxInputStepProtection(215)Inserted information in the logbook of TV exciters.
LogbookEntryMessagesNSUINTEGERantennaRedundancySumFault(226)antennaRedundancySumWarning(196)automaticChangeover(7)automaticFault(108)automaticOn(5)automaticReady(6)boardTemperature(107)connBoardTxA1SumFault(111)connBoardTxA1SumWarning(91)connBoardTxA1Updating(81)connBoardTxA2SumFault(112)connBoardTxA2SumWarning(92)connBoardTxA2Updating(82)connBoardTxA3SumFault(113)connBoardTxA3SumWarning(93)connBoardTxA3Updating(83)connBoardTxA4SumFault(114)connBoardTxA4SumWarning(94)connBoardTxA4Updating(84)connBoardTxA5SumFault(115)connBoardTxA5SumWarning(95)connBoardTxA5Updating(85)connBoardTxA6SumFault(116)connBoardTxA6SumWarning(96)connBoardTxA6Updating(86)connBoardTxA7SumFault(117)connBoardTxA7SumWarning(97)connBoardTxA7Updating(87)connBoardTxA8SumFault(118)connBoardTxA8SumWarning(98)connBoardTxA8Updating(88)connBoardTxBSumFault(119)connBoardTxBSumWarning(99)connBoardTxBUpdating(89)extPwrSupply(201)fanFault(101)inputSwitchChangeOver(123)inputSwitchSumFault(120)inputSwitchSumWarning(100)inputSwitchUpdating(90)intPwrSupply(200)local(3)optionkeyExpired(30)optionkeyWillExpire(105)outputSwitch(122)powerSupply(106)program1RfOn(11)program2RfOn(12)program3RfOn(13)program4RfOn(14)program5RfOn(15)program6RfOn(16)program7RfOn(17)program8RfOn(18)programReserveRfOn(19)rcvNoConnect(103)rcvNoConnectx(109)reboot(40)sumFltRCV(104)sumFltRCVx(110)sumWngRCV(102)swBackupDone(20)swBackupFailed(50)swBackupStarted(10)swRestoreDone(70)swRestoreFailed(80)swRestoreStarted(60)tcbTxBPowerSupply(197)txA1Local(31)txA1NoConnect(51)txA1SumFault(61)txA1SumWarning(41)txA1ToDummyLoad(21)txA2Local(32)txA2NoConnect(52)txA2SumFault(62)txA2SumWarning(42)txA2ToDummyLoad(22)txA3Local(33)txA3NoConnect(53)txA3SumFault(63)txA3SumWarning(43)txA3ToDummyLoad(23)txA4Local(34)txA4NoConnect(54)txA4SumFault(64)txA4SumWarning(44)txA4ToDummyLoad(24)txA5Local(35)txA5NoConnect(55)txA5SumFault(65)txA5SumWarning(45)txA5ToDummyLoad(25)txA6Local(36)txA6NoConnect(56)txA6SumFault(66)txA6SumWarning(46)txA6ToDummyLoad(26)txA7Local(37)txA7NoConnect(57)txA7SumFault(67)txA7SumWarning(47)txA7ToDummyLoad(27)txA8Local(38)txA8NoConnect(58)txA8SumFault(68)txA8SumWarning(48)txA8ToDummyLoad(28)txBLocal(39)txBNoConnect(59)txBParameterSet(124)txBPosition(198)txBSumFault(69)txBSumWarning(49)txBToDummyLoad(29)Inserted information in the logbook of Nplus1-Switchoverunit.
LogbookEntryMessagesNetCCUINTEGERabsorber(104)activeExcA(12)activeExcB(13)activeOstA(14)activeOstB(15)apaConnect(103)boardTemperature(84)boardTemperatureWarning(62)connectionExcA(87)connectionExcB(88)connectionOstA(89)connectionOstB(90)connectionRec(95)excAutoChanged(7)excAutoReady(6)excSwitch(85)extPwrSupply(46)fanFault(51)intPwrSupply(45)local(3)monitorFaultExcA(107)monitorFaultExcB(108)optionKeyExpired(30)optionKeyWillExpire(70)ostAutoChanged(9)ostAutoReady(8)ostSwitch(86)powerSupply(81)reboot(40)receiverConnect(59)receiverSumFault(60)reflectionFault(83)reflectionWarning(44)rfDLoadFault(101)rfDLoadReflection(58)rfDLoadReflectionFault(102)rfDLoadWarning(57)rfFail(82)rfLoopProgram(41)rfLoopReserve(42)rfOkDLoad(19)rfOn(4)rfOnActiveExc(17)rfOnDLoad(18)rfOnSound1(10)rfOnSound2(11)rfOnVision(16)rfSound1Fault(92)rfSound1Warning(48)rfSound2Fault(93)rfSound2Warning(49)rfVision(91)rfVisionWarning(47)rfWarning(43)sumWarningExcA(53)sumWarningExcB(54)sumWarningOstA(55)sumWarningOstB(56)sumWarningRec(52)summaryFaultExcA(97)summaryFaultExcB(98)summaryFaultOstA(99)summaryFaultOstB(100)summaryFaultRec(96)swBackupDone(21)swBackupFailed(22)swBackupStarted(20)swRestoreDone(24)swRestoreFailed(25)swRestoreStarted(23)txModeInconsistent(61)txModeSwitchOverEnded(38)txModeSwitchOverFailed(109)txModeSwitchOverStarted(37)Inserted information in the logbook of NetCCU.
LogbookEntryMessagesOSTINTEGERampACOk(79)ampDCOk(78)ampDriverFault(127)ampFanFault(84)ampNumberDiffers(76)ampOn(77)ampReflectionFault(82)ampRegulationFault(129)ampRfFail(81)ampRfInFail(80)ampTemperatureFault(83)ampTransistorFault(85)ctxPowerFault(128)ostACFault(52)ostCommunicationFault(54)ostCoolingFault(53)ostCoolingWarning(49)ostNoInput(45)ostRackWarning(48)ostReflectionFault(51)ostReflectionWarning(47)ostRfFail(50)ostRfOk(43)ostRfOn(42)ostRfReduced(44)ostRfWarning(46)psu1Fault(124)psu2Fault(125)psuRFault(126)pucConfig(104)pucFan1(96)pucFan1Fault(105)pucFan1Link(89)pucFan2(97)pucFan2Fault(106)pucFan2Link(90)pucFan3(98)pucFan3Fault(107)pucFan3Link(91)pucFan4(99)pucFan4Fault(108)pucFan4Link(92)pucFault(86)pucFilter(117)pucLink(88)pucMaintenance(103)pucOn(95)pucPressure(102)pucPressureFault(111)pucPuOff(118)pucPump1(100)pucPump1Fault(109)pucPump1Link(93)pucPump2(101)pucPump2Fault(110)pucPump2Link(94)pucWarning(87)rackACFault(69)rackAbsorberFault(122)rackAmplifierSumFault(66)rackCoolingSumFault(70)rackCoolingSumWarning(65)rackDCFault(73)rackFan1Fault(63)rackFan2Fault(64)rackGpiFault(67)rackGpiWarning(62)rackLinkOk(58)rackOn(59)rackOvervoltageProtection(123)rackProbeNotCalibrated(119)rackSumFault(121)rackTempFaultAbs1(71)rackTempFaultAbs2(72)rackTemperatureFault(68)rackTemperatureWarning(120)reducedRfExcA(60)reducedRfExcB(61)Inserted information in the logbook of outputstage.
LogbookEntryMessagesXV703INTEGERampFail(17)boardTemperature(11)fanFault(12)fanWarning(7)ifrPllFail(18)local(3)loopOpen(15)noConnection(16)noNetCCUConnection(0)ok(5)on(4)pInFail(21)powerSupply(10)reboot(14)refFreqFail(20)rfFail(22)rfOn(8)rfiPllFail(19)summaryFault(1)summaryWarning(2)updatedBIOS(9)Inserted information in the logbook of XV703 transposers.
LogbookEntrySlopeINTEGERreset(2)set(1)These are the information which are inserted in the logbook.
LogbookMaxEntryNumberInteger32 (0..255)The maximum number of entries in a logbook. This is used in other MIBs as a placeholder.
ProdInfoModuleNameFmINTEGERamplifier(101)exciter(1)exciterBootload(4)exciterBootprog(3)exciterFpga(6)exciterMainboard(2)exciterOs(5)netCCU(50)rackcontroller(100)The product information module names for FM.
ProdInfoModuleNameNsuINTEGERtcBoard(70)The product information module names for NSU.
ProdInfoModuleNameTvINTEGERamplifier(101)exciter(1)exciterInputInterface(3)exciterMainboard(2)exciterRfBoard(4)exciterSynth1(5)exciterSynth2(6)exciterSynth3(7)netCCU(50)rackcontroller(100)The product information module names for TV.
ReadableStringOCTET STRING (SIZE (0..255))Display hint:
255aAn octet string containing a human-readable string. This string may have originally been encoded as specified in EN 300 468 Annex A, but this is not a requirement. To maintain generality, the information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in RFC2279. Control codes are interpreted as specified in EN 300 468 Annex A, section A.1. The interpretation of other control codes is undefined. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character/code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
SwitchOnOffINTEGERoff(2)on(1)This is for all on/off-switches.
Sx801AmplifierStateINTEGERoff(1)ok(3)unknown(4)warning(2)Description.
TimeOfDayOCTET STRING (SIZE (2 | 3))Display hint:
1d:1d:1dA time of day specification. octets contents range ------ -------- ----- 1 hour 0..23 2 minute 0..59 3 second 0..59 For example, 1:30:17 PM would be displayed as 13:30:17. The second can be omitted.
TriggerINTEGERidle(1)trigger(2)Trigger for starting a certain action. idle(1) --> ready, do nothing trigger(2) --> do now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
TvStandardINTEGERatsc(3)atv(1)dab(7)dtmb(4)dvb(2)dvbt2(9)inconsistent(100)isdbt(8)mediaFLO(5)test(6)The TV standards. The value 'inconsistent' cannot be written. It is shown only when switching from one standard to another in between.
Traps / Notifications
- ntpSyncFailed
1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.2 - swUpdateStarted
1.3.6.1.4.1.2566.127.1.2.167.1.2.0.10.0.1 - testTrap
1.3.6.1.4.1.2566.127.1.2.167.1.2.0.1