NTRON714FX6-MIB
Red Lion Controls (N-Tron)Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE
snmptranslate -m NTRON714FX6-MIB -Tpsnmpwalk -v2c -c <community> -m NTRON714FX6-MIB <host> 1.3.6.1.4.1.28381.700.7Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nntron | 1.3.6.1.4.1.28381 | |||
| Nntron7xx | 1.3.6.1.4.1.28381.700 | |||
| Intron714fx6 | 1.3.6.1.4.1.28381.700.7 | |||
identity Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE | ||||
| NntronSysGroup | 1.3.6.1.4.1.28381.700.7.1 | |||
| SntronSysReset | 1.3.6.1.4.1.28381.700.7.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to 'switchReset' will cause the switch to perform a hardware reset within approximately 4-6 seconds.Setting this object to 'switchNoReset ' will have no effect.The value 'switchNoReset' will be returned whenever this object is retrieved .
| ||||
| SntronSwVersion | 1.3.6.1.4.1.28381.700.7.1.2 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current This object identifies the Version Number of Current Release. | ||||
| SntronBuildDateAndTime | 1.3.6.1.4.1.28381.700.7.1.3 | DisplayString (SIZE (0..100)) | RO | |
scalar · DisplayString (SIZE (0..100)) · read-only · current This object will hold the image build date and time. | ||||
| SntronTotalRam | 1.3.6.1.4.1.28381.700.7.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object will give the total RAM available in the system. | ||||
| SntronTotalFlash | 1.3.6.1.4.1.28381.700.7.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object will give the total Flash available in system. | ||||
| SntronEthernetPortCount | 1.3.6.1.4.1.28381.700.7.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object will return the number of 10/100 Mbps Ethernet ports on the switch. | ||||
| SntronCurrentIpAddress | 1.3.6.1.4.1.28381.700.7.1.7 | IpAddress | RO | |
scalar · IpAddress · read-only · current The Current IP address is the one which is currently used and is obtained dynamically through protocol interaction.( DHCP ) This address is NULL if the Address is Statically configured. | ||||
| SntronConfiguredIpAddress | 1.3.6.1.4.1.28381.700.7.1.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Configured IP address of the device. This is the address configured through Network or cli. | ||||
| SntronConfiguredSubnetMask | 1.3.6.1.4.1.28381.700.7.1.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Configured Subnet Mask of the device. | ||||
| SntronConfiguredGateway | 1.3.6.1.4.1.28381.700.7.1.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Configured Gateway/Router address of the device | ||||
| SntronUpdateConfiguredIpAddr | 1.3.6.1.4.1.28381.700.7.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current By setting this object to enable will update the ipaddress, subnetmask and the router ip address.
| ||||
| SntronIPAddressStatus | 1.3.6.1.4.1.28381.700.7.1.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch , was configured/obtained.
| ||||
| SntronTotalNoOfPorts | 1.3.6.1.4.1.28381.700.7.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object will give the total number of ports available in the device . | ||||
| SntronMacAddress | 1.3.6.1.4.1.28381.700.7.1.14 | DisplayString (SIZE (0..40)) | RO | |
scalar · DisplayString (SIZE (0..40)) · read-only · current The mac address of the system . | ||||
| SntronContactStatus | 1.3.6.1.4.1.28381.700.7.1.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the switch contact .
| ||||
| SntronPowerFault | 1.3.6.1.4.1.28381.700.7.1.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current The power fault status .
| ||||
| SntronModelString | 1.3.6.1.4.1.28381.700.7.1.17 | DisplayString (SIZE (0..100)) | RO | |
scalar · DisplayString (SIZE (0..100)) · read-only · current This object will hold the switch model string. | ||||
| SntronBlVersion | 1.3.6.1.4.1.28381.700.7.1.18 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current This object identifies the Version Number of Current Bootloader Release. | ||||
| NntronNViewGroup | 1.3.6.1.4.1.28381.700.7.2 | |||
| SntronNViewState | 1.3.6.1.4.1.28381.700.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global status of NView broadcasts.
| ||||
| SntronNViewInterval | 1.3.6.1.4.1.28381.700.7.2.2 | Integer32 (5..500) | RW | |
scalar · Integer32 (5..500) · read-write · current Global interval between NView broadcasts. | ||||
| TntronNViewTable | 1.3.6.1.4.1.28381.700.7.2.3 | NA | ||
table · not-accessible · current The table that contains the information about the per port NView status. | ||||
| RntronNViewEntry | 1.3.6.1.4.1.28381.700.7.2.3.1 | NA | ||
| CntronNViewPortNumber | 1.3.6.1.4.1.28381.700.7.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The unique identifier to identify the entry in the ntronNViewTable. | ||||
| CntronNViewMulticast | 1.3.6.1.4.1.28381.700.7.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The status of a port for transmitting NView packets.
| ||||
| CntronNViewStats | 1.3.6.1.4.1.28381.700.7.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The status of a port for having its stats sent as NView packets.
| ||||
| NntronTFTPGroup | 1.3.6.1.4.1.28381.700.7.3 | |||
| SntronTFTPServerIpAddress | 1.3.6.1.4.1.28381.700.7.3.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The ipaddress of the Tftp server. | ||||
| SntronTFTPRemoteFileName | 1.3.6.1.4.1.28381.700.7.3.2 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The field gives the file name to be downloaded. | ||||
| SntronTFTPAction | 1.3.6.1.4.1.28381.700.7.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to the value mentioned above will cause the specific function to be called. When performing config actions either the config flags below or the same defaults as on the web will be used if not set as below.
| ||||
| SntronTFTPConfigFlags | 1.3.6.1.4.1.28381.700.7.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronTFTPAction is complete
| ||||
| NntronPortMirroringGroup | 1.3.6.1.4.1.28381.700.7.7 | |||
| SntronMirroringState | 1.3.6.1.4.1.28381.700.7.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This Field gives the current state of the mirror. Setting this object to an value enable the mirror .If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port.
| ||||
| SntronMirroringDestinationPort | 1.3.6.1.4.1.28381.700.7.7.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is the Destination port number for which there is another mirror port.If the ntronMirroringState is Enabled then the mirror port gets routed with all the packets going in and out of Destination port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Destination port. One of the port is dedicated to this so that for any port as destination port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled. | ||||
| TntronPortMirroringTable | 1.3.6.1.4.1.28381.700.7.7.3 | NA | ||
table · not-accessible · current The table which contains the mirroring information of the ports . | ||||
| RntronPortMirroringEntry | 1.3.6.1.4.1.28381.700.7.7.3.1 | NA | ||
| CntronPortMirroringNo | 1.3.6.1.4.1.28381.700.7.7.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the port of the switch. | ||||
| CntronPortMirroringTx | 1.3.6.1.4.1.28381.700.7.7.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current This object shows the mirror Tx status of the port. | ||||
| CntronPortMirroringRx | 1.3.6.1.4.1.28381.700.7.7.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This object shows the mirror Rx status of the port. | ||||
| NntronPortConfigGroup | 1.3.6.1.4.1.28381.700.7.8 | |||
| TntronPortConfigTable | 1.3.6.1.4.1.28381.700.7.8.1 | NA | ||
table · not-accessible · current The table which contains the statistics information of the ports. | ||||
| RntronPortConfigEntry | 1.3.6.1.4.1.28381.700.7.8.1.1 | NA | ||
| CntronPortNo | 1.3.6.1.4.1.28381.700.7.8.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the port of the switch. | ||||
| CntronPortName | 1.3.6.1.4.1.28381.700.7.8.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This attribute associates a user defined string name with the port. | ||||
| CntronPortAdminState | 1.3.6.1.4.1.28381.700.7.8.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This attribute allows an administrative request to disable or enable communications on this port.
| ||||
| CntronPortSpeed | 1.3.6.1.4.1.28381.700.7.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This attribute allows an administrative request to read/write the speed of this port.
| ||||
| CntronPortDuplexStatus | 1.3.6.1.4.1.28381.700.7.8.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This attribute allows an administrative request to read the status of Duplex on this port.
| ||||
| CntronPortLinkState | 1.3.6.1.4.1.28381.700.7.8.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This attribute allows an administrative request to read the status of link state on this port.
| ||||
| CntronPortPriority | 1.3.6.1.4.1.28381.700.7.8.1.1.7 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current This attribute allows an administrative request to read/write the Priority of the port. | ||||
| CntronPortFlowControl | 1.3.6.1.4.1.28381.700.7.8.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Automatically, flow control accordingly is taken care of. BY Default, Flow Control is Disabled.
| ||||
| CntronPortBackPressure | 1.3.6.1.4.1.28381.700.7.8.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This per-port attribute describes whether the port identified has BackPressure Enabled or not. BY Default, BackPressure is Disabled.
| ||||
| CntronPortAutonegotiation | 1.3.6.1.4.1.28381.700.7.8.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This per-port attribute describes whether the port identified has AutoNegotiation Enabled or not. BY Default, BackPressure is Disabled.
| ||||
| CntronPortOverWritePriority | 1.3.6.1.4.1.28381.700.7.8.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This per-port attribute describes whether the port identified has OverWritePriority Enabled or not. BY Default, BackPressure is Disabled.
| ||||
| CntronPortPVID | 1.3.6.1.4.1.28381.700.7.8.1.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current This is the port VLAN ID. | ||||
| CntronPortCrossover | 1.3.6.1.4.1.28381.700.7.8.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This is the port setting for Crossover.
| ||||
| NntronIgmpGroup | 1.3.6.1.4.1.28381.700.7.9 | |||
| SntronIgmpState | 1.3.6.1.4.1.28381.700.7.9.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object holds the current state of the igmp. By configuring this to Enable, the igmp will be enabled.
| ||||
| SntronQueryMode | 1.3.6.1.4.1.28381.700.7.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current To set the switch's query mode.
| ||||
| SntronRouterMode | 1.3.6.1.4.1.28381.700.7.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current To set the switch's router mode.
| ||||
| TntronIgmpMemberTable | 1.3.6.1.4.1.28381.700.7.9.4 | NA | ||
table · not-accessible · current The table that contains the information about the igmp members. | ||||
| RntronIgmpMemberEntry | 1.3.6.1.4.1.28381.700.7.9.4.1 | NA | ||
| CntronIgmpMemberTableIndex | 1.3.6.1.4.1.28381.700.7.9.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The unique identifier to identify the igmp member. | ||||
| CntronIgmpGroupIpAddress | 1.3.6.1.4.1.28381.700.7.9.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IpAddress of the Multicast Group. | ||||
| CntronIgmpPortNumber | 1.3.6.1.4.1.28381.700.7.9.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The port number from which the multicast Ip is received. | ||||
| CntronIgmpVlanId | 1.3.6.1.4.1.28381.700.7.9.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The Vlan Id to which the igmpPortNumber belongs. | ||||
| TntronIgmpRouterTable | 1.3.6.1.4.1.28381.700.7.9.5 | NA | ||
table · not-accessible · current The table that contains the information about the igmp routers. | ||||
| RntronIgmpRouterEntry | 1.3.6.1.4.1.28381.700.7.9.5.1 | NA | ||
| CntronIgmpRouterTableIndex | 1.3.6.1.4.1.28381.700.7.9.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The unique identifier to identify the igmp router. | ||||
| CntronIgmpRouterIpAddress | 1.3.6.1.4.1.28381.700.7.9.5.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IpAddress of the Router. | ||||
| CntronIgmpRouterPortNumber | 1.3.6.1.4.1.28381.700.7.9.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The port no from which the router query has been received. | ||||
| TntronIgmpPortTable | 1.3.6.1.4.1.28381.700.7.9.6 | NA | ||
table · not-accessible · current The table that contains the information about the igmp port status. | ||||
| RntronIgmpPortEntry | 1.3.6.1.4.1.28381.700.7.9.6.1 | NA | ||
| CntronIgmpPortTableIndex | 1.3.6.1.4.1.28381.700.7.9.6.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The unique identifier to identify the igmp port. | ||||
| CntronIgmpPortManRouter | 1.3.6.1.4.1.28381.700.7.9.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Per-Port Attribute for if the port is a Manual Router Port
| ||||
| CntronIgmpPortRFilter | 1.3.6.1.4.1.28381.700.7.9.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Per-Port Attribute for if the port has RFilter enabled
| ||||
| NntronBroadcastGroup | 1.3.6.1.4.1.28381.700.7.13 | |||
| TntronBroadcastBPCLTable | 1.3.6.1.4.1.28381.700.7.13.1 | NA | ||
table · not-accessible · current The table that contains the information about the best packet count limit. | ||||
| RntronBroadcastBPCLEntry | 1.3.6.1.4.1.28381.700.7.13.1.1 | NA | ||
| CntronBroadcastPortNumber | 1.3.6.1.4.1.28381.700.7.13.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The unique identifier to identify the entry in the ntronBroadcastBPCLTable. | ||||
| CntronBroadcastPercentage | 1.3.6.1.4.1.28381.700.7.13.1.1.2 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current The percentage of broadcast packets that can be allowed. | ||||
| NntronConfigGroup | 1.3.6.1.4.1.28381.700.7.14 | |||
| SntronConfigSave | 1.3.6.1.4.1.28381.700.7.14.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current If this configurable object is set to enable then all the Configured data of the all the modules is written into flash.
| ||||
| SntronConfigErase | 1.3.6.1.4.1.28381.700.7.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to the value mentioned above will cause the specific function to be called. When performing the enable action either the config flags below or the same defaults as on the web will be used if not set as below. Any of the other options will ignore the below flags and do as they are described
| ||||
| SntronConfigEraseFlags | 1.3.6.1.4.1.28381.700.7.14.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronConfigErase is complete
| ||||
| NntronSnmpGroup | 1.3.6.1.4.1.28381.700.7.15 | |||
| SntronSnmpGetCommunityName | 1.3.6.1.4.1.28381.700.7.15.1 | DisplayString (SIZE (3..15)) | RW | |
scalar · DisplayString (SIZE (3..15)) · read-write · current The community name used to authenticate the get/getnext request from snmp Manager. | ||||
| SntronSnmpTrapCommunityName | 1.3.6.1.4.1.28381.700.7.15.2 | DisplayString (SIZE (3..15)) | RW | |
scalar · DisplayString (SIZE (3..15)) · read-write · current The community name used to authenticate the Trap request to snmp Manager. | ||||
| TntronSnmpManagerIpAddressTable | 1.3.6.1.4.1.28381.700.7.15.3 | NA | ||
table · not-accessible · current The ip address table of the snmp managers. | ||||
| RntronSnmpManagerIpAddressEntry | 1.3.6.1.4.1.28381.700.7.15.3.1 | NA | ||
row · not-accessible · current An entry in the ntronSnmpManagerIpAddressTable | ||||
| CntronSnmpManagerTableIndex | 1.3.6.1.4.1.28381.700.7.15.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The index of the snmp manager. | ||||
| CntronSnmpManagerIpAddress | 1.3.6.1.4.1.28381.700.7.15.3.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The Ip Address of the snmp Manager. | ||||
| NntronNRingGroup | 1.3.6.1.4.1.28381.700.7.16 | |||
| SntronNRingMode | 1.3.6.1.4.1.28381.700.7.16.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Operational mode of NRing system.
| ||||
| SntronNRingState | 1.3.6.1.4.1.28381.700.7.16.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of NRing system.
| ||||
| SntronNRingVersion | 1.3.6.1.4.1.28381.700.7.16.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Version of NRing system. | ||||
| NntronTrapGroup | 1.3.6.1.4.1.28381.700.7.18 | |||
| !ntronPowerChange | 1.3.6.1.4.1.28381.700.7.18.1 | |||
notification · current An ntronPowerChange trap signifies that the sending SNMP application entity recognizes a change in the power fault variable either from a power failure or a restoration of power.
| ||||
Traps / Notifications
- ntronPowerChange
1.3.6.1.4.1.28381.700.7.18.1