ROSMGMT-OSPFV2-MIB
Beijing Raisecom Scientific & Technology Development Co., Ltd.This MIB module defines objects to Ospf.
snmptranslate -m ROSMGMT-OSPFV2-MIB -Tpsnmpwalk -v2c -c <community> -m ROSMGMT-OSPFV2-MIB <host> 1.3.6.1.4.1.8886.60.47Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| RAISECOM-BASE-MIB | rosMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SWITCH-TC | EnableVar |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrosMgmtOspf | 1.3.6.1.4.1.8886.60.47 | |||
identity This MIB module defines objects to Ospf. | ||||
| NrosMgmtOspfNotifications | 1.3.6.1.4.1.8886.60.47.1 | |||
| NrosMgmtOspfTraps | 1.3.6.1.4.1.8886.60.47.1.0 | |||
| !rosMgmtOspfIfStateChange | 1.3.6.1.4.1.8886.60.47.1.0.1 | |||
notification · current An rosMgmtOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup). | ||||
| !rosMgmtOspfVirtIfStateChange | 1.3.6.1.4.1.8886.60.47.1.0.2 | |||
notification · current An rosMgmtOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point). | ||||
| !rosMgmtOspfNbrStateChange | 1.3.6.1.4.1.8886.60.47.1.0.3 | |||
notification · current An rosMgmtOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by rosMgmtOspfIfStateChange. | ||||
| !rosMgmtOspfVirtNbrStateChange | 1.3.6.1.4.1.8886.60.47.1.0.4 | |||
notification · current An rosMgmtOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full). | ||||
| !rosMgmtOspfIfConfigError | 1.3.6.1.4.1.8886.60.47.1.0.5 | |||
notification · current An rosMgmtOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming. | ||||
| !rosMgmtOspfVirtIfConfigError | 1.3.6.1.4.1.8886.60.47.1.0.6 | |||
notification · current An ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming. | ||||
| !rosMgmtOspfIfAuthFailure | 1.3.6.1.4.1.8886.60.47.1.0.7 | |||
notification · current An rosMgmtOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. | ||||
| !rosMgmtOspfVirtIfAuthFailure | 1.3.6.1.4.1.8886.60.47.1.0.8 | |||
notification · current An rosMgmtOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type. | ||||
| !rosMgmtOspfIfRxBadPacket | 1.3.6.1.4.1.8886.60.47.1.0.9 | |||
notification · current An rosMgmtOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed. | ||||
| !rosMgmtOspfVirtIfRxBadPacket | 1.3.6.1.4.1.8886.60.47.1.0.10 | |||
notification · current An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed. | ||||
| !rosMgmtOspfTxRetransmit | 1.3.6.1.4.1.8886.60.47.1.0.11 | |||
notification · current An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry. | ||||
| !rosMgmtOspfVirtIfTxRetransmit | 1.3.6.1.4.1.8886.60.47.1.0.12 | |||
notification · current An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry. | ||||
| !rosMgmtOspfOriginateLsa | 1.3.6.1.4.1.8886.60.47.1.0.13 | |||
notification · current An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge. | ||||
| !rosMgmtOspfMaxAgeLsa | 1.3.6.1.4.1.8886.60.47.1.0.14 | |||
notification · current An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge. | ||||
| !rosMgmtOspfLsdbOverflow | 1.3.6.1.4.1.8886.60.47.1.0.15 | |||
notification · current An rosMgmtOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded rosMgmtOspfExtLsdbLimit. | ||||
| !rosMgmtOspfLsdbApproachingOverflow | 1.3.6.1.4.1.8886.60.47.1.0.16 | |||
notification · current An rosMgmtOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of rosMgmtOspfExtLsdbLimit. | ||||
| !rosMgmtOspfIfKeyValid | 1.3.6.1.4.1.8886.60.47.1.0.17 | |||
notification · current This trap will notify the network manager that some key associated with an interface recovers valid. | ||||
| !rosMgmtOspfIfLastKeyExpiration | 1.3.6.1.4.1.8886.60.47.1.0.18 | |||
notification · current This trap will notify the network manager that the last key associated with an interface expires. | ||||
| !rosMgmtOspfVirtIfKeyValid | 1.3.6.1.4.1.8886.60.47.1.0.19 | |||
notification · current This trap will notify the network manager that some key associated with an virtual link recovers valid. | ||||
| !rosMgmtOspfVirtIfLastKeyExpiration | 1.3.6.1.4.1.8886.60.47.1.0.20 | |||
notification · current This trap will notify the network manager that the last key associated with an virtual link expires. | ||||
| !rosMgmtOspfRedistributeOverflow | 1.3.6.1.4.1.8886.60.47.1.0.21 | |||
notification · current This trap should be generated when the number of redistribute routes exceeds limit. | ||||
| !rosMgmtOspfRedistributeNotOverflow | 1.3.6.1.4.1.8886.60.47.1.0.22 | |||
notification · current This trap should be generated when the number of redistribute routes drop to limit. | ||||
| TrosMgmtOspfTrapControlTable | 1.3.6.1.4.1.8886.60.47.1.1 | NA | ||
table · not-accessible · current The table enable or disable ospf traps | ||||
| RrosMgmtOspfTrapControlEntry | 1.3.6.1.4.1.8886.60.47.1.1.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfTrapControl. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
| ||||
| CrosMgmtOspfSetTrap | 1.3.6.1.4.1.8886.60.47.1.1.1.1 | EnableVar | RW | |
column · EnableVar · read-write · current Whether the Device shoule send traps. | ||||
| CrosMgmtOspfConfigErrorType | 1.3.6.1.4.1.8886.60.47.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps.
| ||||
| CrosMgmtOspfPacketType | 1.3.6.1.4.1.8886.60.47.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current OSPF packet types.
| ||||
| CrosMgmtOspfPacketSrc | 1.3.6.1.4.1.8886.60.47.1.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of an inbound packet that can- not be identified by a neighbor instance. | ||||
| NrosMgmtOspfObjects | 1.3.6.1.4.1.8886.60.47.2 | |||
| TrosMgmtOspfGlobalTable | 1.3.6.1.4.1.8886.60.47.2.1 | NA | ||
table · not-accessible · current OSPF global Vars for every ospf process. | ||||
| RrosMgmtOspfGlobalEntry | 1.3.6.1.4.1.8886.60.47.2.1.1 | NA | ||
| CrosMgmtOspfProcessId | 1.3.6.1.4.1.8886.60.47.2.1.1.1 | ProcessID | RO | |
column · ProcessID · read-only · current A 32-bit unsigned integer uniquely identifying the ospf process. | ||||
| CrosMgmtOspfRouterId | 1.3.6.1.4.1.8886.60.47.2.1.1.2 | RouterID | RC | |
column · RouterID · read-create · current A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfAdminStat | 1.3.6.1.4.1.8886.60.47.2.1.1.3 | EnableVar | RO | |
column · EnableVar · read-only · current The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfVersionNumber | 1.3.6.1.4.1.8886.60.47.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The current version number of the OSPF protocol is 2.
| ||||
| CrosMgmtOspfAreaBdrRtrStatus | 1.3.6.1.4.1.8886.60.47.2.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current A flag to note whether this router is an Area Border Router. | ||||
| CrosMgmtOspfASBdrRtrStatus | 1.3.6.1.4.1.8886.60.47.2.1.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfExternLsaCount | 1.3.6.1.4.1.8886.60.47.2.1.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of external (LS type-5) link state advertisements in the link state database. | ||||
| CrosMgmtOspfExternLsaCksumSum | 1.3.6.1.4.1.8886.60.47.2.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums. | ||||
| CrosMgmtOspfOriginateNewLsas | 1.3.6.1.4.1.8886.60.47.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfRxNewLsas | 1.3.6.1.4.1.8886.60.47.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfExtLsdbLimit | 1.3.6.1.4.1.8886.60.47.2.1.1.11 | Integer32 (-1..2147483647) | RO | |
column · Integer32 (-1..2147483647) · read-only · current The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a router's link state database reaches rosMgmtOspfExtLsdbLimit, the router enters overflow state. The router never holds more than rosMgmtOspfExtLsdbLimit non-default AS-external LSAs in its database. rosMgmtOspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area (i.e., OSPF stub areas and NSSAs are excluded). This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfExitOverflowInterval | 1.3.6.1.4.1.8886.60.47.2.1.1.12 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave overflow state until restarted. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfReferenceBandwidth | 1.3.6.1.4.1.8886.60.47.2.1.1.13 | Unsigned32 (1..4296967) | RC | |
column · Unsigned32 (1..4296967) · read-create · current Reference bandwidth in millionbits/second for calculating default interface metrics. The default value is 100 MBPS. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
| ||||
| CrosMgmtOspfAsLsaCount | 1.3.6.1.4.1.8886.60.47.2.1.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of AS-scope link state advertisements in the AS-scope link state database. | ||||
| CrosMgmtOspfAsLsaCksumSum | 1.3.6.1.4.1.8886.60.47.2.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link state database, and to compare the AS-scope link state database of two routers. | ||||
| CrosMgmtOspfStubRouterSupport | 1.3.6.1.4.1.8886.60.47.2.1.1.16 | TruthValue | RO | |
column · TruthValue · read-only · current The router's support for stub router functionality. | ||||
| CrosMgmtOspfStubRouterAdvertisement | 1.3.6.1.4.1.8886.60.47.2.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
| ||||
| CrosMgmtOspfAdminDistance | 1.3.6.1.4.1.8886.60.47.2.1.1.18 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The administrative distance of ospf process. 0 represents administration distance of ospf is not set. | ||||
| CrosMgmtOspfSpfInterval | 1.3.6.1.4.1.8886.60.47.2.1.1.19 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current Delay(s) between receiving a change to SPF calculation. | ||||
| CrosMgmtOspfReset | 1.3.6.1.4.1.8886.60.47.2.1.1.20 | INTEGER | RC | |
column · INTEGER · read-create · current Reset ospf process by process ID.
| ||||
| CrosMgmtOspfExportMetric | 1.3.6.1.4.1.8886.60.47.2.1.1.21 | Integer32 (0..16777215) | RC | |
column · Integer32 (0..16777215) · read-create · current The default metric of imporing route into ospf process. | ||||
| CrosMgmtOspfExportTag | 1.3.6.1.4.1.8886.60.47.2.1.1.22 | Integer32 | RC | |
column · Integer32 · read-create · current The default tag of importing route into ospf process. | ||||
| CrosMgmtOspfExportType | 1.3.6.1.4.1.8886.60.47.2.1.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current The default type of importing route into ospf process.
| ||||
| CrosMgmtOspfNetCounts | 1.3.6.1.4.1.8886.60.47.2.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current It bas been used to describe the total number of networks in OSPF process. | ||||
| CrosMgmtOspfAreaCounts | 1.3.6.1.4.1.8886.60.47.2.1.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current It bas been used to describe the number of areas in OSPF process. | ||||
| CrosMgmtOspfNssaAreaCounts | 1.3.6.1.4.1.8886.60.47.2.1.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current It bas been used to describe the number of NSSA areas in OSPF process. | ||||
| CrosMgmtOspfSpfCounts | 1.3.6.1.4.1.8886.60.47.2.1.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current It bas been used to describe the total number of SPF calculation in OSPF process. | ||||
| CrosMgmtOspfGlobalStatus | 1.3.6.1.4.1.8886.60.47.2.1.1.28 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| CrosMgmtOspfRedistributeRouteLimit | 1.3.6.1.4.1.8886.60.47.2.1.1.29 | Integer32 (-1 | 1..65535) | RC | |
column · Integer32 (-1 | 1..65535) · read-create · current Specify the max number in importing route.-1 represents the max number in importing route are not set. | ||||
| CrosMgmtOspfDistanceIntra | 1.3.6.1.4.1.8886.60.47.2.1.1.30 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The administrative distance of ospf Intra-area routes. 0 represents administration distance of ospf Intra-area routes are not set. | ||||
| CrosMgmtOspfDistanceInter | 1.3.6.1.4.1.8886.60.47.2.1.1.31 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The administrative distance of ospf Inter-area routes. 0 represents administration distance of ospf Inter-area routes are not set. | ||||
| CrosMgmtOspfDistanceExtern | 1.3.6.1.4.1.8886.60.47.2.1.1.32 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The administrative distance of ospf external routes. 0 represents administration distance of ospf external routes are not set. | ||||
| CrosMgmtOspfRfc1583Compatible | 1.3.6.1.4.1.8886.60.47.2.1.1.33 | TruthValue | RC | |
column · TruthValue · read-create · current ospf process compatible with RFC 1583. | ||||
| CrosMgmtOspfSpfHode | 1.3.6.1.4.1.8886.60.47.2.1.1.34 | Integer32 (1..600) | RC | |
column · Integer32 (1..600) · read-create · current Hold time (s) between consecutive SPF calculations. | ||||
| CrosMgmtOspfBfdAllItfs | 1.3.6.1.4.1.8886.60.47.2.1.1.35 | TruthValue | RC | |
column · TruthValue · read-create · current Ospf process indicate global BFD. | ||||
| CrosMgmtOspfOpaqueCapability | 1.3.6.1.4.1.8886.60.47.2.1.1.36 | TruthValue | RC | |
column · TruthValue · read-create · current Ospf process indicate opaque capability. | ||||
| CrosMgmtOspfTECapability | 1.3.6.1.4.1.8886.60.47.2.1.1.37 | TruthValue | RO | |
column · TruthValue · read-only · current Ospf process indicate TE capability. | ||||
| CrosMgmtOspfTEAreaID | 1.3.6.1.4.1.8886.60.47.2.1.1.38 | IpAddress | RO | deprecated |
column · IpAddress · read-only · deprecated A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CrosMgmtOspfTERouterId | 1.3.6.1.4.1.8886.60.47.2.1.1.39 | RouterID | RC | |
column · RouterID · read-create · current A 32-bit integer uniquely identifying the TE router in the area.By convention, to ensure uniqueness,this should default to the value of the router-id of ospf precess. | ||||
| CrosMgmtOspfGRCapability | 1.3.6.1.4.1.8886.60.47.2.1.1.40 | INTEGER | RC | |
column · INTEGER · read-create · current Use this command to enable OSPF graceful restart or restart signaling. If a router is not restart-enabled, it cannot enter graceful restart mode and act as a helper.
| ||||
| CrosMgmtOspfGRPeriod | 1.3.6.1.4.1.8886.60.47.2.1.1.41 | Integer32 (1..1800) | RC | |
column · Integer32 (1..1800) · read-create · current The grace period for the restarting router. | ||||
| CrosMgmtOspfGRHelper | 1.3.6.1.4.1.8886.60.47.2.1.1.42 | INTEGER | RC | |
column · INTEGER · read-create · current the helper behavior for graceful restart.
| ||||
| CrosMgmtOspfGRHelperMaxPeriod | 1.3.6.1.4.1.8886.60.47.2.1.1.43 | Integer32 (1..1800) | RC | |
column · Integer32 (1..1800) · read-create · current Help only if received grace-period is less than this value. | ||||
| CrosMgmtOspfMaximumLoadBalancing | 1.3.6.1.4.1.8886.60.47.2.1.1.44 | Integer32 (1..8) | RC | |
column · Integer32 (1..8) · read-create · current Maximum load-balancing paths for OSPF. | ||||
| CrosMgmtOspfMaxMetric | 1.3.6.1.4.1.8886.60.47.2.1.1.45 | Integer32 (1..2) | RC | |
column · Integer32 (1..2) · read-create · current The router announces itself as a stub router. | ||||
| CrosMgmtOspfMaxMetricType | 1.3.6.1.4.1.8886.60.47.2.1.1.46 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current The stub router will change the cost include stub link. | ||||
| CrosMgmtOspfMaxMetricTime | 1.3.6.1.4.1.8886.60.47.2.1.1.47 | Integer32 (0 | 90..86400) | RC | |
column · Integer32 (0 | 90..86400) · read-create · current Time, in seconds, router-LSAs are originated with max-metric. | ||||
| CrosMgmtOspfMaxMetricTypeStartup | 1.3.6.1.4.1.8886.60.47.2.1.1.48 | Integer32 (0..1) | RC | |
column · Integer32 (0..1) · read-create · current Set maximum metric for stub links in router-LSAs on start up. | ||||
| CrosMgmtOspfLsdbOverflowLimit | 1.3.6.1.4.1.8886.60.47.2.1.1.49 | Integer32 (0..1000000) | RC | |
column · Integer32 (0..1000000) · read-create · current Set the OSPF link-state database overflow limit. | ||||
| CrosMgmtOspfTrafficAdjustType | 1.3.6.1.4.1.8886.60.47.2.1.1.50 | INTEGER | RC | |
column · INTEGER · read-create · current Set the OSPF traffic adjust feature.
| ||||
| CrosMgmtOspfRouteTagValue | 1.3.6.1.4.1.8886.60.47.2.1.1.51 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Set tag of the import route whcih belongs to the vpn process. | ||||
| CrosMgmtOspfRouteTagCheckDisable | 1.3.6.1.4.1.8886.60.47.2.1.1.52 | TruthValue | RC | |
column · TruthValue · read-create · current Block the inclusion of Tag whcih belongs to the vpn process. | ||||
| CrosMgmtOspfDNBitSetDisableSummary | 1.3.6.1.4.1.8886.60.47.2.1.1.53 | TruthValue | RC | |
column · TruthValue · read-create · current Configure the DN bit in an Summary LSA. The DN bit is set in an Summary LSA by default. | ||||
| CrosMgmtOspfDNBitSetDisableAse | 1.3.6.1.4.1.8886.60.47.2.1.1.54 | TruthValue | RC | |
column · TruthValue · read-create · current Configure the DN bit in an as-external-LSA. The DN bit is set in an as-external-LSA by default. | ||||
| CrosMgmtOspfDNBitSetDisableNssa | 1.3.6.1.4.1.8886.60.47.2.1.1.55 | TruthValue | RC | |
column · TruthValue · read-create · current Configure the DN bit in an Nssa LSA. The DN bit is set in an Nssa LSA by default. | ||||
| CrosMgmtOspfDNBitCheckDisableSummary | 1.3.6.1.4.1.8886.60.47.2.1.1.56 | TruthValue | RC | |
column · TruthValue · read-create · current Check the DN bit in an Summary LSA. The DN bit check is enabled in an Summary LSA by default. | ||||
| CrosMgmtOspfDNBitCheckDisableAse | 1.3.6.1.4.1.8886.60.47.2.1.1.57 | TruthValue | RC | |
column · TruthValue · read-create · current Check the DN bit in an an as-external-LSA. The DN bit check is enabled in an an as-external-LSA by default. | ||||
| CrosMgmtOspfDNBitCheckDisableNssa | 1.3.6.1.4.1.8886.60.47.2.1.1.58 | TruthValue | RC | |
column · TruthValue · read-create · current Check the DN bit in an Nssa LSA. The DN bit check is enabled in an Nssa LSA by default. | ||||
| CrosMgmtOspfSpfMilliInterval | 1.3.6.1.4.1.8886.60.47.2.1.1.59 | Integer32 (0..600000) | RC | |
column · Integer32 (0..600000) · read-create · current Delay(ms) between receiving a change to SPF calculation. | ||||
| CrosMgmtOspfSpfMilliHode | 1.3.6.1.4.1.8886.60.47.2.1.1.60 | Integer32 (0..600000) | RC | |
column · Integer32 (0..600000) · read-create · current Hold time (ms) between consecutive SPF calculations. | ||||
| CrosMgmtOspfLoopFreeAlt | 1.3.6.1.4.1.8886.60.47.2.1.1.61 | TruthValue | RC | |
column · TruthValue · read-create · current Enable OSPF Loop-Free Alternate(LFA). | ||||
| TrosMgmtOspfAreaTable | 1.3.6.1.4.1.8886.60.47.2.2 | NA | ||
table · not-accessible · current Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. | ||||
| RrosMgmtOspfAreaEntry | 1.3.6.1.4.1.8886.60.47.2.2.1 | NA | ||
row · not-accessible · current Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfAreaId | 1.3.6.1.4.1.8886.60.47.2.2.1.1 | AreaID | NA | |
column · AreaID · not-accessible · current A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CrosMgmtOspfAuthType | 1.3.6.1.4.1.8886.60.47.2.2.1.2 | OspfAuthenticationType | RC | |
column · OspfAuthenticationType · read-create · current The authentication type specified for an area. | ||||
| CrosMgmtOspfImportAsExtern | 1.3.6.1.4.1.8886.60.47.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs
| ||||
| CrosMgmtOspfSpfRuns | 1.3.6.1.4.1.8886.60.47.2.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfAreaBdrRtrCount | 1.3.6.1.4.1.8886.60.47.2.2.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass. | ||||
| CrosMgmtOspfAsBdrRtrCount | 1.3.6.1.4.1.8886.60.47.2.2.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass. | ||||
| CrosMgmtOspfAreaLsaCount | 1.3.6.1.4.1.8886.60.47.2.2.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of link state advertisements in this area's link state database, excluding AS-external LSAs. | ||||
| CrosMgmtOspfAreaLsaCksumSum | 1.3.6.1.4.1.8886.60.47.2.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums. | ||||
| CrosMgmtOspfAreaSummary | 1.3.6.1.4.1.8886.60.47.2.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
| ||||
| CrosMgmtOspfAreaNssaTranslatorRole | 1.3.6.1.4.1.8886.60.47.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.
| ||||
| CrosMgmtOspfAreaNssaTranslatorState | 1.3.6.1.4.1.8886.60.47.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.
| ||||
| CrosMgmtOspfAreaNssaTranslatorStabilityInterval | 1.3.6.1.4.1.8886.60.47.2.2.1.12 | PositiveInteger | RO | |
column · PositiveInteger · read-only · current The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.
| ||||
| CrosMgmtOspfAreaNssaTranslatorEvents | 1.3.6.1.4.1.8886.60.47.2.2.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfAreaDefaultCost | 1.3.6.1.4.1.8886.60.47.2.2.1.14 | BigMetric | RC | |
column · BigMetric · read-create · current It indicates the cost of default route of NSSA area or stub area. | ||||
| CrosMgmtOspfAreaType | 1.3.6.1.4.1.8886.60.47.2.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current It has been used to describe the type of area,area 0 indicates backbone, area that has virtual-links is transmit area. When area is configured as stub,it's a stub area, and same as nssa area.other areas are called normal areas.
| ||||
| CrosMgmtOspfAreaStatus | 1.3.6.1.4.1.8886.60.47.2.2.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| CrosMgmtOspfAreaFilterInIpPrefixListName | 1.3.6.1.4.1.8886.60.47.2.2.1.17 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Filter incoming summary lsa,the value of this object indicates the name of an ip-prefix-list. | ||||
| CrosMgmtOspfAreaFilterOutIpPrefixListName | 1.3.6.1.4.1.8886.60.47.2.2.1.18 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Filter outgoing summary lsa,the value of this object indicates the name of an ip-prefix-list. | ||||
| CrosMgmtOspfAreaTeCapability | 1.3.6.1.4.1.8886.60.47.2.2.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current Indicate Area TE enable state. | ||||
| TrosMgmtOspfNetWorkTable | 1.3.6.1.4.1.8886.60.47.2.3 | NA | ||
table · not-accessible · current The list of directly-connected networks which enable the OSPF function. | ||||
| RrosMgmtOspfNetWorkEntry | 1.3.6.1.4.1.8886.60.47.2.3.1 | NA | ||
row · not-accessible · current Defines an entry in the rosMgmtOspfNetWorkTable. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfNet | 1.3.6.1.4.1.8886.60.47.2.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the net or subnet indicated by the range. | ||||
| CrosMgmtOspfMask | 1.3.6.1.4.1.8886.60.47.2.3.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The subnet mask that pertains to the net or subnet. | ||||
| CrosMgmtOspfNetWorkStatus | 1.3.6.1.4.1.8886.60.47.2.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfStubAreaTable | 1.3.6.1.4.1.8886.60.47.2.4 | NA | ||
table · not-accessible · current The set of metrics that will be advertised by a default Area Border Router into a stub area. | ||||
| RrosMgmtOspfStubAreaEntry | 1.3.6.1.4.1.8886.60.47.2.4.1 | NA | ||
row · not-accessible · current The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfStubAreaId | 1.3.6.1.4.1.8886.60.47.2.4.1.1 | AreaID | NA | |
column · AreaID · not-accessible · current The 32-bit identifier for the stub area. On creation, this can be derived from the instance. | ||||
| CrosMgmtOspfStubAreaOption | 1.3.6.1.4.1.8886.60.47.2.4.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current The option of STUB area.True means that ABR cann't send summary lsa to stub area. | ||||
| CrosMgmtOspfStubAreaStatus | 1.3.6.1.4.1.8886.60.47.2.4.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfNssaAreaTable | 1.3.6.1.4.1.8886.60.47.2.5 | NA | ||
table · not-accessible · current The set of metrics that will be advertised by a default Area Border Router into a Nssa area. | ||||
| RrosMgmtOspfNssaAreaEntry | 1.3.6.1.4.1.8886.60.47.2.5.1 | NA | ||
row · not-accessible · current The metric for a given Type of Service that will be advertised by a default Area Border Router into a Nssa area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfNssaAreaId | 1.3.6.1.4.1.8886.60.47.2.5.1.1 | AreaID | NA | |
column · AreaID · not-accessible · current The 32-bit identifier for the nssa area. On creation, this can be derived from the instance. | ||||
| CrosMgmtOspfNssaAreaOption | 1.3.6.1.4.1.8886.60.47.2.5.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The option of Nssa area. If first bit is set, Router should generate default type-7 lsa; if second bit is set, nssa area cann't import ex- ternal route; if third bit is set, ABR cann't send summary lsas to the nssa area.
| ||||
| CrosMgmtOspfNssaAreaStatus | 1.3.6.1.4.1.8886.60.47.2.5.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfIfTable | 1.3.6.1.4.1.8886.60.47.2.6 | NA | ||
table · not-accessible · current The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. It augments the ipAddrTable with OSPF specific information. | ||||
| RrosMgmtOspfIfEntry | 1.3.6.1.4.1.8886.60.47.2.6.1 | NA | ||
row · not-accessible · current The OSPF interface entry describes one interface from the viewpoint of OSPF. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfAddressLessIf | 1.3.6.1.4.1.8886.60.47.2.6.1.1 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address. | ||||
| CrosMgmtOspfIfIpAddress | 1.3.6.1.4.1.8886.60.47.2.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of this OSPF interface. | ||||
| CrosMgmtOspfIfAreaId | 1.3.6.1.4.1.8886.60.47.2.6.1.3 | AreaID | RO | |
column · AreaID · read-only · current A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | ||||
| CrosMgmtOspfIfType | 1.3.6.1.4.1.8886.60.47.2.6.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
| ||||
| CrosMgmtOspfIfAdminStat | 1.3.6.1.4.1.8886.60.47.2.6.1.5 | Status | RO | |
column · Status · read-only · current The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF. | ||||
| CrosMgmtOspfIfRtrPriority | 1.3.6.1.4.1.8886.60.47.2.6.1.6 | DesignatedRouterPriority | RC | |
column · DesignatedRouterPriority · read-create · current The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. | ||||
| CrosMgmtOspfIfTransitDelay | 1.3.6.1.4.1.8886.60.47.2.6.1.7 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.
| ||||
| CrosMgmtOspfIfRetransInterval | 1.3.6.1.4.1.8886.60.47.2.6.1.8 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note that minimal value SHOULD be 1 second.
| ||||
| CrosMgmtOspfIfHelloInterval | 1.3.6.1.4.1.8886.60.47.2.6.1.9 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
| ||||
| CrosMgmtOspfIfRtrDeadInterval | 1.3.6.1.4.1.8886.60.47.2.6.1.10 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
| ||||
| CrosMgmtOspfIfPollInterval | 1.3.6.1.4.1.8886.60.47.2.6.1.11 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
| ||||
| CrosMgmtOspfIfState | 1.3.6.1.4.1.8886.60.47.2.6.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The OSPF Interface State.
| ||||
| CrosMgmtOspfIfDesignatedRouter | 1.3.6.1.4.1.8886.60.47.2.6.1.13 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the designated router. | ||||
| CrosMgmtOspfIfBackupDesignatedRouter | 1.3.6.1.4.1.8886.60.47.2.6.1.14 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the backup designated router. | ||||
| CrosMgmtOspfIfEvents | 1.3.6.1.4.1.8886.60.47.2.6.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfIfAuthKeyId | 1.3.6.1.4.1.8886.60.47.2.6.1.16 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The key id of md5 authentication. | ||||
| CrosMgmtOspfIfAuthSimpleKeyType | 1.3.6.1.4.1.8886.60.47.2.6.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current The type of password for simple authentication.
| ||||
| CrosMgmtOspfIfAuthMd5KeyType | 1.3.6.1.4.1.8886.60.47.2.6.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The type of password for md5 authentication.
| ||||
| CrosMgmtOspfIfAuthSimpleKey | 1.3.6.1.4.1.8886.60.47.2.6.1.19 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The password used as an OSPF authentication key when simple password security is enabled. | ||||
| CrosMgmtOspfIfAuthMd5Key | 1.3.6.1.4.1.8886.60.47.2.6.1.20 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The password used as an OSPF authentication key when md5 security is enabled. | ||||
| CrosMgmtOspfIfAuthKeyChain | 1.3.6.1.4.1.8886.60.47.2.6.1.21 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The name of key chain. | ||||
| CrosMgmtOspfIfAuthType | 1.3.6.1.4.1.8886.60.47.2.6.1.22 | OspfAuthenticationType | RC | |
column · OspfAuthenticationType · read-create · current The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router. | ||||
| CrosMgmtOspfIfLsaCount | 1.3.6.1.4.1.8886.60.47.2.6.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of link-local link state advertisements in this interface's link-local link state database. | ||||
| CrosMgmtOspfIfLsaCksumSum | 1.3.6.1.4.1.8886.60.47.2.6.1.24 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of routers attached to the same subnet. | ||||
| CrosMgmtOspfIfDesignatedRouterId | 1.3.6.1.4.1.8886.60.47.2.6.1.25 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the designated router. | ||||
| CrosMgmtOspfIfBackupDesignatedRouterId | 1.3.6.1.4.1.8886.60.47.2.6.1.26 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the backup designated router. | ||||
| CrosMgmtOspfIfPassive | 1.3.6.1.4.1.8886.60.47.2.6.1.27 | EnableVar | RC | |
column · EnableVar · read-create · current Indicate the interface is a passive interface. | ||||
| CrosMgmtOspfIfMtu | 1.3.6.1.4.1.8886.60.47.2.6.1.28 | EnableVar | RC | |
column · EnableVar · read-create · current Indicate ignore the interface's mtu. | ||||
| CrosMgmtOspfIfMetric | 1.3.6.1.4.1.8886.60.47.2.6.1.29 | Metric | RC | |
column · Metric · read-create · current The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed. | ||||
| CrosMgmtOspfIfBfd | 1.3.6.1.4.1.8886.60.47.2.6.1.30 | EnableVar | RC | |
column · EnableVar · read-create · current Indicate the interface enables BFD function. | ||||
| CrosMgmtOspfIfGRResync | 1.3.6.1.4.1.8886.60.47.2.6.1.31 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current The interval period starts from the time a restart signal is received from a neighbor.
| ||||
| TrosMgmtOspfVirtIfTable | 1.3.6.1.4.1.8886.60.47.2.7 | NA | ||
table · not-accessible · current Information about this router's virtual interfaces that the OSPF Process is configured to carry on. | ||||
| RrosMgmtOspfVirtIfEntry | 1.3.6.1.4.1.8886.60.47.2.7.1 | NA | ||
row · not-accessible · current Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfVirtIfAreaId | 1.3.6.1.4.1.8886.60.47.2.7.1.1 | AreaID | RO | |
column · AreaID · read-only · current The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. | ||||
| CrosMgmtOspfVirtIfNeighbor | 1.3.6.1.4.1.8886.60.47.2.7.1.2 | RouterID | RO | |
column · RouterID · read-only · current The Router ID of the virtual neighbor. | ||||
| CrosMgmtOspfVirtIfTransitDelay | 1.3.6.1.4.1.8886.60.47.2.7.1.3 | UpToMaxAge | RC | |
column · UpToMaxAge · read-create · current The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.
| ||||
| CrosMgmtOspfVirtIfRetransInterval | 1.3.6.1.4.1.8886.60.47.2.7.1.4 | UpToMaxAge | RC | |
column · UpToMaxAge · read-create · current The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This value should be well over the expected round-trip time. Note that the minimal value SHOULD be 1 second.
| ||||
| CrosMgmtOspfVirtIfHelloInterval | 1.3.6.1.4.1.8886.60.47.2.7.1.5 | HelloRange | RC | |
column · HelloRange · read-create · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
| ||||
| CrosMgmtOspfVirtIfRtrDeadInterval | 1.3.6.1.4.1.8886.60.47.2.7.1.6 | PositiveInteger | RC | |
column · PositiveInteger · read-create · current The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
| ||||
| CrosMgmtOspfVirtIfState | 1.3.6.1.4.1.8886.60.47.2.7.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current OSPF virtual interface states.
| ||||
| CrosMgmtOspfVirtIfEvents | 1.3.6.1.4.1.8886.60.47.2.7.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfVirtIfAuthKeyId | 1.3.6.1.4.1.8886.60.47.2.7.1.9 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The key id of md5 authentication. | ||||
| CrosMgmtOspfVirtIfAuthSimpleKeyType | 1.3.6.1.4.1.8886.60.47.2.7.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The type of password for simple authentication.
| ||||
| CrosMgmtOspfVirtIfAuthMd5KeyType | 1.3.6.1.4.1.8886.60.47.2.7.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The type of password for md5 authentication.
| ||||
| CrosMgmtOspfVirtIfAuthSimpleKey | 1.3.6.1.4.1.8886.60.47.2.7.1.12 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The password used as an OSPF authentication key when simple password security is enabled. | ||||
| CrosMgmtOspfVirtIfAuthMd5Key | 1.3.6.1.4.1.8886.60.47.2.7.1.13 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The password used as an OSPF authentication key when md5 security is enabled. | ||||
| CrosMgmtOspfVirtIfAuthKeyChain | 1.3.6.1.4.1.8886.60.47.2.7.1.14 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The name of key chain. | ||||
| CrosMgmtOspfVirtIfAuthType | 1.3.6.1.4.1.8886.60.47.2.7.1.15 | OspfAuthenticationType | RC | |
column · OspfAuthenticationType · read-create · current The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router. | ||||
| CrosMgmtOspfVirtIfLsaCount | 1.3.6.1.4.1.8886.60.47.2.7.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total number of link-local link state advertisements in this virtual interface's link-local link state database. | ||||
| CrosMgmtOspfVirtIfLsaCksumSum | 1.3.6.1.4.1.8886.60.47.2.7.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link state database of the virtual neighbors. | ||||
| CrosMgmtOspfVirtIfCost | 1.3.6.1.4.1.8886.60.47.2.7.1.18 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current It has been used to describe the cost of virtual interface. | ||||
| CrosMgmtOspfVirtIfStatus | 1.3.6.1.4.1.8886.60.47.2.7.1.19 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfNbrTable | 1.3.6.1.4.1.8886.60.47.2.8 | NA | ||
table · not-accessible · current A table describing all non-virtual neighbors in the locality of the OSPF router. | ||||
| RrosMgmtOspfNbrEntry | 1.3.6.1.4.1.8886.60.47.2.8.1 | NA | ||
row · not-accessible · current The information regarding a single neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfNbrIpAddr | 1.3.6.1.4.1.8886.60.47.2.8.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces. | ||||
| CrosMgmtOspfNbrAddressLessIndex | 1.3.6.1.4.1.8886.60.47.2.8.1.2 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance. | ||||
| CrosMgmtOspfNbrRtrId | 1.3.6.1.4.1.8886.60.47.2.8.1.3 | RouterID | RO | |
column · RouterID · read-only · current A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. | ||||
| CrosMgmtOspfNbrOptions | 1.3.6.1.4.1.8886.60.47.2.8.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external information; if zero, it is a stub area. Bit 2, if set, indicates that the system is capable of routing IP multicast datagrams, that is that it implements the multicast extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type-7 external advertisements, which are translated into type-5 external advertisements at NSSA borders. | ||||
| CrosMgmtOspfNbrPriority | 1.3.6.1.4.1.8886.60.47.2.8.1.5 | DesignatedRouterPriority | RO | |
column · DesignatedRouterPriority · read-only · current The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | ||||
| CrosMgmtOspfNbrState | 1.3.6.1.4.1.8886.60.47.2.8.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the relationship with this neighbor.
| ||||
| CrosMgmtOspfNbrEvents | 1.3.6.1.4.1.8886.60.47.2.8.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfNbrLsRetransQLen | 1.3.6.1.4.1.8886.60.47.2.8.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The current length of the retransmission queue. | ||||
| CrosMgmtOspfNbrMode | 1.3.6.1.4.1.8886.60.47.2.8.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current It has been used to describe the master-slave mode of neighbor.
| ||||
| TrosMgmtOspfNbmaCfgNbrTable | 1.3.6.1.4.1.8886.60.47.2.9 | NA | ||
table · not-accessible · current A table describing all configured neigbors on nbma network. | ||||
| RrosMgmtOspfNbmaCfgNbrEntry | 1.3.6.1.4.1.8886.60.47.2.9.1 | NA | ||
row · not-accessible · current The information regarding a Configured neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfNbmaCfgNbrIpAddr | 1.3.6.1.4.1.8886.60.47.2.9.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces. | ||||
| CrosMgmtOspfNbmaCfgNbrPriority | 1.3.6.1.4.1.8886.60.47.2.9.1.2 | DesignatedRouterPriority | RC | |
column · DesignatedRouterPriority · read-create · current The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | ||||
| CrosMgmtOspfNbmaCfgNbrStatus | 1.3.6.1.4.1.8886.60.47.2.9.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfVirtNbrTable | 1.3.6.1.4.1.8886.60.47.2.10 | NA | ||
table · not-accessible · current This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only. | ||||
| RrosMgmtOspfVirtNbrEntry | 1.3.6.1.4.1.8886.60.47.2.10.1 | NA | ||
row · not-accessible · current Virtual neighbor information. | ||||
| CrosMgmtOspfVirtNbrArea | 1.3.6.1.4.1.8886.60.47.2.10.1.1 | AreaID | RO | |
column · AreaID · read-only · current The Transit Area Identifier. | ||||
| CrosMgmtOspfVirtNbrRtrId | 1.3.6.1.4.1.8886.60.47.2.10.1.2 | RouterID | RO | |
column · RouterID · read-only · current A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| CrosMgmtOspfVirtNbrIpAddr | 1.3.6.1.4.1.8886.60.47.2.10.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address this virtual neighbor is using. | ||||
| CrosMgmtOspfVirtNbrOptions | 1.3.6.1.4.1.8886.60.47.2.10.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, i.e., that it implements OSPF multicast routing. | ||||
| CrosMgmtOspfVirtNbrState | 1.3.6.1.4.1.8886.60.47.2.10.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the virtual neighbor relationship.
| ||||
| CrosMgmtOspfVirtNbrEvents | 1.3.6.1.4.1.8886.60.47.2.10.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. | ||||
| CrosMgmtOspfVirtNbrLsRetransQLen | 1.3.6.1.4.1.8886.60.47.2.10.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The current length of the retransmission queue. | ||||
| CrosMgmtOspfVirtNbrLessIf | 1.3.6.1.4.1.8886.60.47.2.10.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current It has been used to describe the out interface index of this virtual neighbor. | ||||
| CrosMgmtOspfVirtNbrMode | 1.3.6.1.4.1.8886.60.47.2.10.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current It has been used to describe the master-slave mode of virtual neighbor.
| ||||
| TrosMgmtOspfAreaAggregateTable | 1.3.6.1.4.1.8886.60.47.2.11 | NA | ||
table · not-accessible · current The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an Area's borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. | ||||
| RrosMgmtOspfAreaAggregateEntry | 1.3.6.1.4.1.8886.60.47.2.11.1 | NA | ||
row · not-accessible · current A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfAreaAggregateAreaID | 1.3.6.1.4.1.8886.60.47.2.11.1.1 | AreaID | NA | |
column · AreaID · not-accessible · current The area within which the address aggregate is to be found. | ||||
| CrosMgmtOspfAreaAggregateLsdbType | 1.3.6.1.4.1.8886.60.47.2.11.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.
| ||||
| CrosMgmtOspfAreaAggregateNet | 1.3.6.1.4.1.8886.60.47.2.11.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the net or subnet indicated by the range. | ||||
| CrosMgmtOspfAreaAggregateMask | 1.3.6.1.4.1.8886.60.47.2.11.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The subnet mask that pertains to the net or subnet. | ||||
| CrosMgmtOspfAreaAggregateEffect | 1.3.6.1.4.1.8886.60.47.2.11.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
| ||||
| CrosMgmtOspfAreaAggregateStatus | 1.3.6.1.4.1.8886.60.47.2.11.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfExternalAggregateTable | 1.3.6.1.4.1.8886.60.47.2.12 | NA | ||
table · not-accessible · current It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. | ||||
| RrosMgmtOspfExternalAggregateEntry | 1.3.6.1.4.1.8886.60.47.2.12.1 | NA | ||
row · not-accessible · current A single external aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | ||||
| CrosMgmtOspfExternalAggregateNet | 1.3.6.1.4.1.8886.60.47.2.12.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the net or subnet indicated by the range. | ||||
| CrosMgmtOspfExternalAggregateMask | 1.3.6.1.4.1.8886.60.47.2.12.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The subnet mask that pertains to the net or subnet. | ||||
| CrosMgmtOspfExternalAggregateEffect | 1.3.6.1.4.1.8886.60.47.2.12.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object controls the advertisement of external route summary.
| ||||
| CrosMgmtOspfExternalAggregateCost | 1.3.6.1.4.1.8886.60.47.2.12.1.4 | BigMetric | RC | |
column · BigMetric · read-create · current It indicates the cost of aggregated external route, 16777215 represents the cost is not set, the metric of route while decided by ospf itself according to the route type. | ||||
| CrosMgmtOspfExternalAggregateStatus | 1.3.6.1.4.1.8886.60.47.2.12.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfLsdbTable | 1.3.6.1.4.1.8886.60.47.2.13 | NA | ||
table · not-accessible · current The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to. | ||||
| RrosMgmtOspfLsdbEntry | 1.3.6.1.4.1.8886.60.47.2.13.1 | NA | ||
row · not-accessible · current A single link state advertisement. | ||||
| CrosMgmtOspfLsdbAreaId | 1.3.6.1.4.1.8886.60.47.2.13.1.1 | AreaID | RO | |
column · AreaID · read-only · current The 32-bit identifier of the area from which the LSA was received. | ||||
| CrosMgmtOspfLsdbType | 1.3.6.1.4.1.8886.60.47.2.13.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be displayed in the rosMgmtOspfAsLsdbTable rather than here.
| ||||
| CrosMgmtOspfLsdbLsId | 1.3.6.1.4.1.8886.60.47.2.13.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CrosMgmtOspfLsdbRouterId | 1.3.6.1.4.1.8886.60.47.2.13.1.4 | RouterID | RO | |
column · RouterID · read-only · current The 32-bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CrosMgmtOspfLsdbSequence | 1.3.6.1.4.1.8886.60.47.2.13.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | ||||
| CrosMgmtOspfLsdbAge | 1.3.6.1.4.1.8886.60.47.2.13.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds.
| ||||
| CrosMgmtOspfLsdbChecksum | 1.3.6.1.4.1.8886.60.47.2.13.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CrosMgmtOspfLsdbAdvertisement | 1.3.6.1.4.1.8886.60.47.2.13.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. | ||||
| TrosMgmtOspfAsLsdbTable | 1.3.6.1.4.1.8886.60.47.2.14 | NA | ||
table · not-accessible · current The OSPF Process's AS-scope LSA link state database. The database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area. | ||||
| RrosMgmtOspfAsLsdbEntry | 1.3.6.1.4.1.8886.60.47.2.14.1 | NA | ||
row · not-accessible · current A single link state advertisement. | ||||
| CrosMgmtOspfAsLsdbType | 1.3.6.1.4.1.8886.60.47.2.14.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The type of the link state advertisement. Each link state type has a separate advertisement format.
| ||||
| CrosMgmtOspfAsLsdbLsId | 1.3.6.1.4.1.8886.60.47.2.14.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CrosMgmtOspfAsLsdbRouterId | 1.3.6.1.4.1.8886.60.47.2.14.1.3 | RouterID | NA | |
column · RouterID · not-accessible · current The 32-bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CrosMgmtOspfAsLsdbSequence | 1.3.6.1.4.1.8886.60.47.2.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | ||||
| CrosMgmtOspfAsLsdbAge | 1.3.6.1.4.1.8886.60.47.2.14.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds.
| ||||
| CrosMgmtOspfAsLsdbChecksum | 1.3.6.1.4.1.8886.60.47.2.14.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CrosMgmtOspfAsLsdbAdvertisement | 1.3.6.1.4.1.8886.60.47.2.14.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The entire link state advertisement, including its header. | ||||
| TrosMgmtOspfAreaLsaCountTable | 1.3.6.1.4.1.8886.60.47.2.15 | NA | ||
table · not-accessible · current This table maintains per-area, per-LSA-type counters | ||||
| RrosMgmtOspfAreaLsaCountEntry | 1.3.6.1.4.1.8886.60.47.2.15.1 | NA | ||
row · not-accessible · current An entry with a number of link advertisements of a given type for a given area. | ||||
| CrosMgmtOspfAreaLsaCountAreaId | 1.3.6.1.4.1.8886.60.47.2.15.1.1 | AreaID | NA | |
column · AreaID · not-accessible · current This entry Area ID. | ||||
| CrosMgmtOspfAreaLsaCountLsaType | 1.3.6.1.4.1.8886.60.47.2.15.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current This entry LSA type.
| ||||
| CrosMgmtOspfAreaLsaCountNumber | 1.3.6.1.4.1.8886.60.47.2.15.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of LSAs of a given type for a given area. | ||||
| TrosMgmtOspfRedistributeTable | 1.3.6.1.4.1.8886.60.47.2.16 | NA | ||
table · not-accessible · current Import external route to ospf protocol. | ||||
| RrosMgmtOspfRedistributeEntry | 1.3.6.1.4.1.8886.60.47.2.16.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfRedistributeTable | ||||
| CrosMgmtOspfRedistributeProtocol | 1.3.6.1.4.1.8886.60.47.2.16.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Route protocol to be redistributed.
| ||||
| CrosMgmtOspfRedistributeProcessId | 1.3.6.1.4.1.8886.60.47.2.16.1.2 | ProcessID | RO | |
column · ProcessID · read-only · current Process id of redistributed route protocol, only support ospf. | ||||
| CrosMgmtOspfRedistributeCost | 1.3.6.1.4.1.8886.60.47.2.16.1.3 | BigMetric | RC | |
column · BigMetric · read-create · current It indicates the cost of redistributed route, 16777215 represents the cost is not set, the metric of route while decided by ospf itself according to the route type. | ||||
| CrosMgmtOspfRedistributeType | 1.3.6.1.4.1.8886.60.47.2.16.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The type of external route.
| ||||
| CrosMgmtOspfRedistributeStatus | 1.3.6.1.4.1.8886.60.47.2.16.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| CrosMgmtOspfRedistributeRouteMapName | 1.3.6.1.4.1.8886.60.47.2.16.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Specify a route-map. | ||||
| CrosMgmtOspfRedistributeTag | 1.3.6.1.4.1.8886.60.47.2.16.1.7 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Set tag of route. | ||||
| TrosMgmtOspfDefaultInfoTable | 1.3.6.1.4.1.8886.60.47.2.17 | NA | ||
table · not-accessible · current The table generate or delete the default route. | ||||
| RrosMgmtOspfDefaultInfoEntry | 1.3.6.1.4.1.8886.60.47.2.17.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfDefaultInfoTable
| ||||
| CrosMgmtOspfDefaultInfoAlways | 1.3.6.1.4.1.8886.60.47.2.17.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current Whether always inform default route. | ||||
| CrosMgmtOspfDefaultInfoCost | 1.3.6.1.4.1.8886.60.47.2.17.1.2 | BigMetric | RC | |
column · BigMetric · read-create · current It indicates the default cost of route, 16777215 represents the default cost is not set, the metric of route while decided by ospf itself according to the route type. | ||||
| CrosMgmtOspfDefaultInfoType | 1.3.6.1.4.1.8886.60.47.2.17.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current It indicates the type of default route.
| ||||
| CrosMgmtOspfDefaultInfoStatus | 1.3.6.1.4.1.8886.60.47.2.17.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfPacketIoStatisTable | 1.3.6.1.4.1.8886.60.47.2.18 | NA | ||
table · not-accessible · current The table is used to storage all kinds of input and output packet statistical information of OSPF process. | ||||
| RrosMgmtOspfPacketIoStatisEntry | 1.3.6.1.4.1.8886.60.47.2.18.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfPacketIoStatisTable | ||||
| CrosMgmtOspfPacketIoStatisIoType | 1.3.6.1.4.1.8886.60.47.2.18.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current It has been used to describe the IO direction of packet.
| ||||
| CrosMgmtOspfPacketIoStatisPktType | 1.3.6.1.4.1.8886.60.47.2.18.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current It has been used to describe the type of OSPF packet.
| ||||
| CrosMgmtOspfPacketIoStatisNumber | 1.3.6.1.4.1.8886.60.47.2.18.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The number indicates the number of specified type of packets on input or output direction. | ||||
| TrosMgmtOspfRouteTable | 1.3.6.1.4.1.8886.60.47.2.19 | NA | ||
table · not-accessible · current The table is used to storage OSPF calculation of routing table. | ||||
| RrosMgmtOspfRouteEntry | 1.3.6.1.4.1.8886.60.47.2.19.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfRouteTable | ||||
| CrosMgmtOspfRouteDest | 1.3.6.1.4.1.8886.60.47.2.19.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current It has been used to describe the destination address of an ospf route. | ||||
| CrosMgmtOspfRouteMask | 1.3.6.1.4.1.8886.60.47.2.19.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current It has been used to describe the mask of an ospf route. | ||||
| CrosMgmtOspfRouteType | 1.3.6.1.4.1.8886.60.47.2.19.1.3 | Integer32 (1..55) | NA | |
column · Integer32 (1..55) · not-accessible · current It indicates the type of an ospf route. The hige 8 bits represents the ospf route type. Value 1, represents the route is a ROUTER route, whith is to a destined router. Value 2, is for a NETWORK route, most caculated ospf route is NETWORK route. Value 3, represents the route is to be DISCARDed resently. The low 8 bits represents the ospf route path type. Value 1, represents the route path is a intra area path, Value 2, represents the route path is a inter area path, Value 3, represents the route path is a type1 external path, Value 4, represents the route path is a type2 external path | ||||
| CrosMgmtOspfRouteLsType | 1.3.6.1.4.1.8886.60.47.2.19.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current It has been used to describe the LSA type of a router.
| ||||
| CrosMgmtOspfRouteMetric | 1.3.6.1.4.1.8886.60.47.2.19.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current It has been used to describe the metric of an ospf route. | ||||
| CrosMgmtOspfRouteNextHop | 1.3.6.1.4.1.8886.60.47.2.19.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current It has been used to describe the nexthop address of an ospf route. | ||||
| CrosMgmtOspfRouteAdvRtr | 1.3.6.1.4.1.8886.60.47.2.19.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current It has been used to describe the advertising router of an ospf route. | ||||
| CrosMgmtOspfRouteArea | 1.3.6.1.4.1.8886.60.47.2.19.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current It has been used to describe the ccmputing area of an ospf route. | ||||
| TrosMgmtOspfBdrRouteTable | 1.3.6.1.4.1.8886.60.47.2.20 | NA | ||
table · not-accessible · current The table is used to storage the imformation of boder router. | ||||
| RrosMgmtOspfBdrRouteEntry | 1.3.6.1.4.1.8886.60.47.2.20.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfBdrRouteTable | ||||
| CrosMgmtOspfBdrRouteRtrType | 1.3.6.1.4.1.8886.60.47.2.20.1.1 | Integer32 (1..119) | NA | |
column · Integer32 (1..119) · not-accessible · current It indicates the type of an ospf router. The hige 8 bits is a bit mask corresponding to the ospf router type. Bit 1, if set, indicates that the router is an ABR. Bit 2, if set, indicates that the router is an ASBR.. Bit 3, if set, indicates that the router has a VLINK in this area. Bit 4, if set, indicates that the routers always translates Type-7. Bit 5, if set, indicates that it is a shortcut-ABR specific flag. The low 8 bits represents the route path type to this router. Value 1, represents the route path is a intra area path, Value 2, represents the route path is a inter area path, Value 3, represents the route path is a type1 external path, Value 4, represents the route path is a type2 external path | ||||
| CrosMgmtOspfBdrRouteArea | 1.3.6.1.4.1.8886.60.47.2.20.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current It has been used to describe the area of a boder router. | ||||
| CrosMgmtOspfBdrRouteDest | 1.3.6.1.4.1.8886.60.47.2.20.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current It has been used to describe the boder router by it's router id. | ||||
| CrosMgmtOspfBdrRouteNextHop | 1.3.6.1.4.1.8886.60.47.2.20.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current IIt has been used to describe the nexthop router to reach a boder router. | ||||
| CrosMgmtOspfBdrRouteLsType | 1.3.6.1.4.1.8886.60.47.2.20.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current It has been used to describe the LSA type of a boder router.
| ||||
| CrosMgmtOspfBdrRouteMetric | 1.3.6.1.4.1.8886.60.47.2.20.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current It has been used to describe the metric to a boder router. | ||||
| NrosMgmtOspfDistributeListGroup | 1.3.6.1.4.1.8886.60.47.2.21 | |||
| TrosMgmtOspfDistributeListInTable | 1.3.6.1.4.1.8886.60.47.2.21.1 | NA | ||
table · not-accessible · current The table is used to config and check distribute-in policy. | ||||
| RrosMgmtOspfDistributeListInEntry | 1.3.6.1.4.1.8886.60.47.2.21.1.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfDistributeListInTable
| ||||
| CrosMgmtOspfDistrInIpPrefixListName | 1.3.6.1.4.1.8886.60.47.2.21.1.1.1 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Filter incoming routing updates,the value of this object indicates the name of an ip-prefix-list. | ||||
| CrosMgmtOspfDistrInAclNum | 1.3.6.1.4.1.8886.60.47.2.21.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy, -1 is a value to inditace no setting of acl. | ||||
| CrosMgmtOspfDistrInRowStatus | 1.3.6.1.4.1.8886.60.47.2.21.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation,construction, and destruction.The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfDistributeListOutTable | 1.3.6.1.4.1.8886.60.47.2.21.2 | NA | ||
table · not-accessible · current The table is used to config and check distribute-out policy. | ||||
| RrosMgmtOspfDistributeListOutEntry | 1.3.6.1.4.1.8886.60.47.2.21.2.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfDistributeListOutTable
| ||||
| CrosMgmtOspfDistrOutIpPrefixListName | 1.3.6.1.4.1.8886.60.47.2.21.2.1.1 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Filter outgoing routing updates,the value of this object indicates the name of an ip-prefix-list. | ||||
| CrosMgmtOspfDistrOutAclNum | 1.3.6.1.4.1.8886.60.47.2.21.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy, -1 is a value to inditace no setting of acl. | ||||
| CrosMgmtOspfDistrOutRowStatus | 1.3.6.1.4.1.8886.60.47.2.21.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation,construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfDistributeListOutProtocolTable | 1.3.6.1.4.1.8886.60.47.2.21.3 | NA | ||
table · not-accessible · current The table is used to config and check distribute-out policy based on protocol. | ||||
| RrosMgmtOspfDistributeListOutProtocolEntry | 1.3.6.1.4.1.8886.60.47.2.21.3.1 | NA | ||
row · not-accessible · current Define an entry in the rosMgmtOspfDistributeListOutProtocolTable | ||||
| CrosMgmtOspfDistrOutProtocol | 1.3.6.1.4.1.8886.60.47.2.21.3.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Redistributed route protocol.
| ||||
| CrosMgmtOspfDistrOutProcessId | 1.3.6.1.4.1.8886.60.47.2.21.3.1.2 | ProcessID | NA | |
column · ProcessID · not-accessible · current Process id of redistributed route protocol, only support ospf. | ||||
| CrosMgmtOspfDistrOutProIpPrefixListName | 1.3.6.1.4.1.8886.60.47.2.21.3.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current Filtering outgoing updates based on imported protocol, the value of this object indicates the name of an ip-prefix-list. | ||||
| CrosMgmtOspfDistrOutProAclNum | 1.3.6.1.4.1.8886.60.47.2.21.3.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current Filtering outgoing updates based on imported protocol, the value of this object indicates the IP ACL number, -1 is a value to inditace no setting of acl. | ||||
| CrosMgmtOspfDistrOutProRowStatus | 1.3.6.1.4.1.8886.60.47.2.21.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation,construction, and destruction.The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| TrosMgmtOspfDNBitCheckDisableSummaryTable | 1.3.6.1.4.1.8886.60.47.2.22 | NA | ||
table · not-accessible · current The table check or set the operation of ND bit. | ||||
| RrosMgmtOspfDNBitCheckDisableSummaryEntry | 1.3.6.1.4.1.8886.60.47.2.22.1 | NA | ||
row · not-accessible · current Define an entry in the RosMgmtOspfDNBitCheckDisableSummaryEntry | ||||
| CrosMgmtOspfDNBitCheckDisableSummaryRtrId | 1.3.6.1.4.1.8886.60.47.2.22.1.1 | RouterID | NA | |
column · RouterID · not-accessible · current It indicates the router-id of summary-lsa,which can be operated the DN bit separately.This node can only be used for check operation | ||||
| CrosMgmtOspfDNBitCheckDisableSummaryStatus | 1.3.6.1.4.1.8886.60.47.2.22.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | ||||
| NrosMgmtOspfConformance | 1.3.6.1.4.1.8886.60.47.3 | |||
Textual conventions
AreaIDIpAddressDisplay hint:
1d.1d.1d.1dAn OSPF Area Identifier. Note that the Area ID, in OSPF, has the same format as an IP address, but has the function of defining a summarization point for link state advertisements.
BigMetricInteger32 (0..16777215)Display hint:
d-0The OSPF external metric.
DesignatedRouterPriorityInteger32 (0..255)Display hint:
d-0The range of values defined for the priority of a system for becoming the designated router.
HelloRangeInteger32 (1..65535)Display hint:
d-0The range of intervals in seconds on which Hello messages are exchanged.
MetricInteger32 (0..65535)Display hint:
d-0The OSPF internal metric. Note that the OSPF metric is defined as an unsigned value in the range.
OspfAuthenticationTypeINTEGERmd5(2)none(0)simplePassword(1)The authentication type.
PositiveIntegerInteger32 (0..2147483647)Display hint:
d-0A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues.
ProcessIDUnsigned32Display hint:
d-0The OSPF process id.
RouterIDIpAddressDisplay hint:
1d.1d.1d.1dA OSPF Router Identifier. Note that the Router ID, in OSPF, has the same format as an IP address, but identifies the router independent of its IP address.
StatusINTEGERdisabled(2)enabled(1)An indication of the operability of an OSPF function or feature. For example, the status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF routers, and 'disabled' indicates that it is not.
UpToMaxAgeInteger32 (0..3600)Display hint:
d-0The values in seconds that one might find or configure for variables bounded by the maximum age of an LSA.
Traps / Notifications
- rosMgmtOspfIfAuthFailure
1.3.6.1.4.1.8886.60.47.1.0.7 - rosMgmtOspfIfConfigError
1.3.6.1.4.1.8886.60.47.1.0.5 - rosMgmtOspfIfKeyValid
1.3.6.1.4.1.8886.60.47.1.0.17 - rosMgmtOspfIfLastKeyExpiration
1.3.6.1.4.1.8886.60.47.1.0.18 - rosMgmtOspfIfRxBadPacket
1.3.6.1.4.1.8886.60.47.1.0.9 - rosMgmtOspfIfStateChange
1.3.6.1.4.1.8886.60.47.1.0.1 - rosMgmtOspfLsdbApproachingOverflow
1.3.6.1.4.1.8886.60.47.1.0.16 - rosMgmtOspfLsdbOverflow
1.3.6.1.4.1.8886.60.47.1.0.15 - rosMgmtOspfMaxAgeLsa
1.3.6.1.4.1.8886.60.47.1.0.14 - rosMgmtOspfNbrStateChange
1.3.6.1.4.1.8886.60.47.1.0.3 - rosMgmtOspfOriginateLsa
1.3.6.1.4.1.8886.60.47.1.0.13 - rosMgmtOspfRedistributeNotOverflow
1.3.6.1.4.1.8886.60.47.1.0.22 - rosMgmtOspfRedistributeOverflow
1.3.6.1.4.1.8886.60.47.1.0.21 - rosMgmtOspfTxRetransmit
1.3.6.1.4.1.8886.60.47.1.0.11 - rosMgmtOspfVirtIfAuthFailure
1.3.6.1.4.1.8886.60.47.1.0.8 - rosMgmtOspfVirtIfConfigError
1.3.6.1.4.1.8886.60.47.1.0.6 - rosMgmtOspfVirtIfKeyValid
1.3.6.1.4.1.8886.60.47.1.0.19 - rosMgmtOspfVirtIfLastKeyExpiration
1.3.6.1.4.1.8886.60.47.1.0.20 - rosMgmtOspfVirtIfRxBadPacket
1.3.6.1.4.1.8886.60.47.1.0.10 - rosMgmtOspfVirtIfStateChange
1.3.6.1.4.1.8886.60.47.1.0.2 - rosMgmtOspfVirtIfTxRetransmit
1.3.6.1.4.1.8886.60.47.1.0.12 - rosMgmtOspfVirtNbrStateChange
1.3.6.1.4.1.8886.60.47.1.0.4