RAISECOM-POWERMONITOR-MIB
Beijing Raisecom Scientific & Technology Development Co., Ltd.The initial revision of this MIB.
snmptranslate -m RAISECOM-POWERMONITOR-MIB -Tpsnmpwalk -v2c -c <community> -m RAISECOM-POWERMONITOR-MIB <host> 1.3.6.1.4.1.8886.1.24Imports
| RAISECOM-BASE-MIB | raisecomAgent |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IraisecomPowerMonitor | 1.3.6.1.4.1.8886.1.24 | ||||||||||||
identity The initial revision of this MIB. | |||||||||||||
| NraisecomPowerMonitorNotification | 1.3.6.1.4.1.8886.1.24.1 | ||||||||||||
| !raisecomPowerVoltNormal | 1.3.6.1.4.1.8886.1.24.1.1 | ||||||||||||
notification · current The trap notification occur when power-card value translating from abnormal to normal. | |||||||||||||
| !raisecomPowerVoltAbnormal | 1.3.6.1.4.1.8886.1.24.1.2 | ||||||||||||
notification · current The trap notification occur when power-card value translating from normal to abnormal. | |||||||||||||
| !raisecomPowerStatusTrap | 1.3.6.1.4.1.8886.1.24.1.3 | ||||||||||||
notification · current A raisecomPowerTrap trap is sent when a power alarm generate. | |||||||||||||
| !raisecomDyingGaspTrap | 1.3.6.1.4.1.8886.1.24.1.4 | ||||||||||||
notification · current Dying gasp. | |||||||||||||
| NraisecomPowerMonitorMibObjects | 1.3.6.1.4.1.8886.1.24.2 | ||||||||||||
| TraisecomPowerMonitorStateTable | 1.3.6.1.4.1.8886.1.24.2.1 | NA | |||||||||||
table · not-accessible · current Power monitor state table. | |||||||||||||
| RraisecomPowerMonitorStateEntry | 1.3.6.1.4.1.8886.1.24.2.1.1 | NA | |||||||||||
| CraisecomPowerIndex | 1.3.6.1.4.1.8886.1.24.2.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Specify the sequence number of Power. | |||||||||||||
| CraisecomPowerSerialNumber | 1.3.6.1.4.1.8886.1.24.2.1.1.2 | OCTET STRING | RO | | |||||||||
column · OCTET STRING · read-only · current specify the identical serial number of current power card,this string number will be set when device leaving factory Example values from LibreNMS test devices
| |||||||||||||
| CraisecomPowerType | 1.3.6.1.4.1.8886.1.24.2.1.1.3 | INTEGER | RO | dc(2) | |||||||||
column · INTEGER · read-only · current Specify the current type of the power. ac(1) means the current power AC Input. dc(2) means the current power DC Input.
Example values from LibreNMS test devices
| |||||||||||||
| CraisecomPowerVoltReference | 1.3.6.1.4.1.8886.1.24.2.1.1.4 | INTEGER | RO | 0 | |||||||||
column · INTEGER · read-only · current Specify the reference of the volt value of Power. Example values from LibreNMS test devices
| |||||||||||||
| CraisecomPowerVoltValue | 1.3.6.1.4.1.8886.1.24.2.1.1.5 | INTEGER | RO | 0 | |||||||||
column · INTEGER · read-only · current Specify the volt value of Power. Example values from LibreNMS test devices
| |||||||||||||
| CraisecomPowerStatus | 1.3.6.1.4.1.8886.1.24.2.1.1.6 | INTEGER | RO | online(2) | |||||||||
column · INTEGER · read-only · current The status of power alarm.
Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- raisecomDyingGaspTrap
1.3.6.1.4.1.8886.1.24.1.4 - raisecomPowerStatusTrap
1.3.6.1.4.1.8886.1.24.1.3 - raisecomPowerVoltAbnormal
1.3.6.1.4.1.8886.1.24.1.2 - raisecomPowerVoltNormal
1.3.6.1.4.1.8886.1.24.1.1