RADLAN-SSH-MIB
RNDThe MIB module describes the private MIB for SSH supported by Radlan's software and products.
snmptranslate -m RADLAN-SSH-MIB -Tpsnmpwalk -v2c -c <community> -m RADLAN-SSH-MIB <host> 1.3.6.1.4.1.89.78Imports
| RADLAN-MIB | rnd |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlSsh | 1.3.6.1.4.1.89.78 | |||
identity The MIB module describes the private MIB for SSH supported by Radlan's software and products. | ||||
| SrlSshMibVersion | 1.3.6.1.4.1.89.78.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The MIB version. The current version is 2 | ||||
| NrlSshServer | 1.3.6.1.4.1.89.78.2 | |||
| TrlSshServerHostPublicKeyTable | 1.3.6.1.4.1.89.78.2.1 | NA | ||
table · not-accessible · current This table contains the router's public key. Each row in this table contains a fragment of the key, in printable binhex format. There may be up to 160 characters in every fragment, and they are all combined to form one key. The key is generated by writing to rlSshServerRegenerateHostKey. To cause clients to connect to this router without printing warning messages (and also prevent active man-in-the-middle), the router's public key must printed out and inserted into the client's authorized_keys file | ||||
| RrlSshServerHostPublicKeyTableEntry | 1.3.6.1.4.1.89.78.2.1.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshServerHostPublicKeyAlgorithm | 1.3.6.1.4.1.89.78.2.1.1.1 | RlSshPublicKeyAlgorithm | RO | |
column · RlSshPublicKeyAlgorithm · read-only · current Identifies the type of public key to be displayed. | ||||
| CrlSshServerHostPublicKeyFragmentId | 1.3.6.1.4.1.89.78.2.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Identifies the index of this fragment in the final key. All segments must be combined to form one big key. | ||||
| CrlSshServerHostPublicKeyFragmentText | 1.3.6.1.4.1.89.78.2.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current A part of the readable text entry for the server's public authorzation key. | ||||
| TrlSshServerHostPublicKeyFingerprintTable | 1.3.6.1.4.1.89.78.2.2 | NA | ||
table · not-accessible · current This table contains the fingerprint for the router's public key. | ||||
| RrlSshServerHostPublicKeyFingerprintTableEntry | 1.3.6.1.4.1.89.78.2.2.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshServerHostPublicKeyFingerprintAlgorithm | 1.3.6.1.4.1.89.78.2.2.1.1 | RlSshPublicKeyAlgorithm | RO | |
column · RlSshPublicKeyAlgorithm · read-only · current Identifies the type of public key to be displayed. | ||||
| CrlSshServerHostPublicKeyFingerprintDigestFormat | 1.3.6.1.4.1.89.78.2.2.1.2 | RlSshPublicKeyDigestFormat | RO | |
column · RlSshPublicKeyDigestFormat · read-only · current Format of the digest to be displayed (OpenSSH or SSH.com). | ||||
| CrlSshServerHostPublicKeyFingerprint | 1.3.6.1.4.1.89.78.2.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current SECSH format fingerprint of the server's public key. To prevent man in the middle attacks, users should make sure the ssh Server's fingerprint, as printed in the connection process, is similar to the one printed here. | ||||
| TrlSshServerAuthorizedUsersPublicKeyTable | 1.3.6.1.4.1.89.78.2.3 | NA | ||
table · not-accessible · current This table contains public keys for all users who are authorized to access the router. For a user to be able to log in using SSH, the user name must appear in this table, and the user's public key must match the one found here. | ||||
| RrlSshServerAuthorizedUsersPublicKeyTableEntry | 1.3.6.1.4.1.89.78.2.3.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshServerAuthorizedUserName | 1.3.6.1.4.1.89.78.2.3.1.1 | DisplayString (SIZE (1..48)) | RW | |
column · DisplayString (SIZE (1..48)) · read-write · current Name of the user who owns this public key. Both the user name and the key bytes must match before a user is authenticated using this key. | ||||
| CrlSshServerAuthorizedUserPublicKeyFragmentId | 1.3.6.1.4.1.89.78.2.3.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Identifies the index of this fragment in the final key. All segments must be combined to form one big key. | ||||
| CrlSshServerAuthorizedUserPublicKeyFragmentText | 1.3.6.1.4.1.89.78.2.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current A part of the readable text entry for the user's public authorzation key. | ||||
| CrlSshServerAuthorizedUserPublicKeyFragmentStatus | 1.3.6.1.4.1.89.78.2.3.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current Create or delete a fragment of the user's public key. A user is deleted if it has no remaining fragments. | ||||
| TrlSshServerAuthorizedUsersPublicKeyFingerprintTable | 1.3.6.1.4.1.89.78.2.5 | NA | ||
table · not-accessible · current This table contains the fingerprints of the public keys for all users who are authorized to access the router. To prevent man in the middle attacks, users should make sure the user's fingerprint, as printed in the connection process, is similar to the one printed here. | ||||
| RrlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry | 1.3.6.1.4.1.89.78.2.5.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshServerAuthorizedUserFingerprintName | 1.3.6.1.4.1.89.78.2.5.1.1 | DisplayString (SIZE (1..48)) | RW | |
column · DisplayString (SIZE (1..48)) · read-write · current Name of the user who owns this public key. Both the user name and the key bytes must match before a user is authenticated using this key. | ||||
| CrlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm | 1.3.6.1.4.1.89.78.2.5.1.2 | RlSshPublicKeyAlgorithm | RO | |
column · RlSshPublicKeyAlgorithm · read-only · current Identifies the type of public key to be displayed. | ||||
| CrlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat | 1.3.6.1.4.1.89.78.2.5.1.3 | RlSshPublicKeyDigestFormat | RO | |
column · RlSshPublicKeyDigestFormat · read-only · current Format of the digest to be displayed (OpenSSH or SSH.com). | ||||
| CrlSshServerAuthorizedUserPublicKeyFingerprint | 1.3.6.1.4.1.89.78.2.5.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current SECSH format fingerprint of the user's public key. To prevent man in the middle attacks, users should make sure their ssh fingerprint, as printed in the connection process, is similar to the one printed here. | ||||
| TrlSshServerSessionTable | 1.3.6.1.4.1.89.78.2.6 | NA | ||
table · not-accessible · current Each row in this table corresponds to an active SSH session with the server | ||||
| RrlSshServerSessionTableEntry | 1.3.6.1.4.1.89.78.2.6.1 | NA | ||
| CrlSshServerSessionIdentifier | 1.3.6.1.4.1.89.78.2.6.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Identifies the connection to which this row corresponds. | ||||
| CrlSshServerSessionPeerAddress | 1.3.6.1.4.1.89.78.2.6.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The network address of the remote host connected to the server. | ||||
| CrlSshServerSessionPeerPort | 1.3.6.1.4.1.89.78.2.6.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The source network port of the remote host connected to the server. | ||||
| CrlSshServerSessionPeerVersion | 1.3.6.1.4.1.89.78.2.6.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The client version of the remote host connected to the server. | ||||
| CrlSshServerSessionUsername | 1.3.6.1.4.1.89.78.2.6.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current SSH authenticated name of user connected to the server. | ||||
| CrlSshServerSessionCipher | 1.3.6.1.4.1.89.78.2.6.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Data encryption cipher used in this connection. | ||||
| CrlSshServerSessionHMAC | 1.3.6.1.4.1.89.78.2.6.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Message authentication code used in this connection. | ||||
| SrlSshServerPort | 1.3.6.1.4.1.89.78.2.101 | Unsigned32 (1..65535) | RW | |
scalar · Unsigned32 (1..65535) · read-write · current Specifies the TCP port used by the SSH 2 Server to listen for incoming connections. | ||||
| SrlSshServerEnable | 1.3.6.1.4.1.89.78.2.102 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables listening for incoming SSH2 connections on the port defined in rlSshServerPort.
| ||||
| SrlSshServerEnablePublicKeyAuthentication | 1.3.6.1.4.1.89.78.2.103 | INTEGER | RW | |
scalar · INTEGER · read-write · current If PK authentication is enabled, incoming SSH connections are authenticated using public key authentication (using rlSshServerAuthorizedUsersPublicKeyTable), before authenticating using the router's standard AAA. If disabled, SSH connections are only authorized by the router's AAA component.
| ||||
| SrlSshServerRegenerateHostKey | 1.3.6.1.4.1.89.78.2.104 | RlSshPublicKeyAlgorithm | RW | |
scalar · RlSshPublicKeyAlgorithm · read-write · current Setting to a value other than none results in the Server (Host) Key being regenerated. The key size is host-specific. | ||||
| NrlSshClient | 1.3.6.1.4.1.89.78.3 | |||
| SrlSshClientUserName | 1.3.6.1.4.1.89.78.3.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current Specifies the default user name the ssh client will use when authenticating to a remote server. | ||||
| SrlSshClientRegenerateSelfKey | 1.3.6.1.4.1.89.78.3.2 | RlSshPublicKeyAlgorithm | RW | |
scalar · RlSshPublicKeyAlgorithm · read-write · current Setting to a value other than none results in the client self key being regenerated. The key size is host-specific. | ||||
| TrlSshClientSelfPublicKeyTable | 1.3.6.1.4.1.89.78.3.3 | NA | ||
table · not-accessible · current This table contains the router's client self public key. Each row in this table contains a fragment of the key, in printable binhex format. There may be up to 160 characters in every fragment, and they are all combined to form one key. The key is generated by writing to rlSshClientRegenerateSelfKey. To cause clients to connect to this router without printing warning messages (and also prevent active man-in-the-middle), the router's public key must printed out and inserted into the client's authorized_keys file | ||||
| RrlSshClientSelfPublicKeyTableEntry | 1.3.6.1.4.1.89.78.3.3.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshClientSelfPublicKeyFragmentId | 1.3.6.1.4.1.89.78.3.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Identifies the index of this fragment in the final key. All segments must be combined to form one big key. | ||||
| CrlSshClientSelfPublicKeyAlgorithm | 1.3.6.1.4.1.89.78.3.3.1.2 | RlSshPublicKeyAlgorithm | RO | |
column · RlSshPublicKeyAlgorithm · read-only · current Identifies the type of public key to be displayed. | ||||
| CrlSshClientSelfPublicKeyFragmentText | 1.3.6.1.4.1.89.78.3.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current A part of the readable text entry for the router's client public authorization key. | ||||
| TrlSshClientSelfPublicKeyFingerprintTable | 1.3.6.1.4.1.89.78.3.4 | NA | ||
table · not-accessible · current This table contains the fingerprint for the client's self key. | ||||
| RrlSshClientSelfPublicKeyFingerprintTableEntry | 1.3.6.1.4.1.89.78.3.4.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlSshClientSelfPublicKeyFingerprintAlgorithm | 1.3.6.1.4.1.89.78.3.4.1.1 | RlSshPublicKeyAlgorithm | RO | |
column · RlSshPublicKeyAlgorithm · read-only · current Identifies the type of public key to be displayed. | ||||
| CrlSshClientSelfPublicKeyFingerprintDigestFormat | 1.3.6.1.4.1.89.78.3.4.1.2 | RlSshPublicKeyDigestFormat | RO | |
column · RlSshPublicKeyDigestFormat · read-only · current Format of the digest to be displayed (OpenSSH or SSH.com). | ||||
| CrlSshClientSelfPublicKeyFingerprint | 1.3.6.1.4.1.89.78.3.4.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current SECSH format fingerprint of the client's self key. To prevent man in the middle attacks, users should make sure the ssh Server's fingerprint, as printed in the connection process, is similar to the one printed here. | ||||
Textual conventions
RlSshPublicKeyAlgorithmINTEGERdsa(2)none(999)rsa(1)rsa1(0)This textual convention describes the various possible public key algorithms. The key algorithm is used to select the PK to be generated and is also used when viewing the public keys.
RlSshPublicKeyDigestFormatINTEGERbubbleBabble(1)hex(0)This textual convention describes the format used to display the public key fingerprint. The hex format is the format used by PGP and OpenSSH. The bubble-babble format is used by SSH.com software.