RADLAN-Physicaldescription-MIB
RNDThe private MIB module definition for physical device configuration.
snmptranslate -m RADLAN-Physicaldescription-MIB -Tpsnmpwalk -v2c -c <community> -m RADLAN-Physicaldescription-MIB <host> 1.3.6.1.4.1.89.53Imports
| ENTITY-SENSOR-MIB | EntitySensorStatus, EntitySensorValue |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| MAU-MIB | JackType |
| RADLAN-DEVICEPARAMS-MIB | rndErrorDesc, rndErrorSeverity |
| RADLAN-HWENVIROMENT | RlEnvMonState |
| RADLAN-MIB | rnd, rndNotifications |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| !rlStackUnitRemoved | 1.3.6.1.4.1.89.0.186 | ||||||||||||||||||||
notification · current Trap indicating that a unit was removed from the stack.
| |||||||||||||||||||||
| !rlStackConfigChangedRingChain | 1.3.6.1.4.1.89.0.187 | ||||||||||||||||||||
notification · current Trap indicating that the configuration of the stack has changed. - from ring to chain - from chain to ring.
| |||||||||||||||||||||
| !rlStackBackupUnitRemoved | 1.3.6.1.4.1.89.0.188 | ||||||||||||||||||||
notification · current Trap indicating that the backup unit was removed from the stack.
| |||||||||||||||||||||
| !rlStackMasterSwitchover | 1.3.6.1.4.1.89.0.189 | ||||||||||||||||||||
notification · current Trap indicating that a new master was elected. The old maste is the backup now.
| |||||||||||||||||||||
| !rlStackUnitDifferentSwVersion | 1.3.6.1.4.1.89.0.190 | ||||||||||||||||||||
notification · current Trap indicating that the new unit added to the stack has different software version than the master.
| |||||||||||||||||||||
| !rlStackDuplicateUnitNotJoin | 1.3.6.1.4.1.89.0.191 | ||||||||||||||||||||
notification · current Trap indicating that a new unit with duplicated unit id was added to the stack - but it will not join the stack.
| |||||||||||||||||||||
| !rlStackLinkChange | 1.3.6.1.4.1.89.0.195 | ||||||||||||||||||||
notification · current Trap indicating that Link has change in one of the Stacking Ports.
| |||||||||||||||||||||
| IrlPhysicalDescription | 1.3.6.1.4.1.89.53 | ||||||||||||||||||||
identity The private MIB module definition for physical device configuration. | |||||||||||||||||||||
| SrlPhdMibVersion | 1.3.6.1.4.1.89.53.1 | INTEGER | RO | 5 | |||||||||||||||||
scalar · INTEGER · read-only · current MIB's version, the current version is 3.
1: original version
2: a. new tables
rlPhdModuleHotSwapTable
rlPhdStackOrderTable
b. new scalars
rlPhdStackReorder
rlPhdNumberOfUnits
rlPhdMaxNumberOfUnits
3: a. new field rlPhdModuleRole of rlPhdModuleTable
b. new scalars
rlPhdForceMasterUnit
4: a. new fields rlPhdModuleConnect1 and rlPhdModuleConnect2
of rlPhdModuleTable.
5: a. Prefix rlPhD were replaced by prefix rlPhd
b. fields rlPhdModuleConnect1 and rlPhdModuleConnect2 are
moved from rlPhdModuleTable to rlPhdStackTable.
c. new fiels rlPhdStackSofrwareVer, rlPhdStackProductID and
rlPhdStackMacAddr of rlPhdStackTable.
d. new scalars
rlPhdStackReloadUnit
e. new scalars
rlPhdStackOrderTopUnit
rlPhdStackOrderBottomUnit
rlPhdStackOrderPermutationExample values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdModuleTable | 1.3.6.1.4.1.89.53.2 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing it in this module | |||||||||||||||||||||
| RrlPhdModuleEntry | 1.3.6.1.4.1.89.53.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a module (board) | |||||||||||||||||||||
| CrlPhdModuleStackUnit | 1.3.6.1.4.1.89.53.2.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The number of the stack unit Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleIndex | 1.3.6.1.4.1.89.53.2.1.2 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The number of the module in its stack unit Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleType | 1.3.6.1.4.1.89.53.2.1.3 | INTEGER | RO | 204 | |||||||||||||||||
column · INTEGER · read-only · current The index for each module type Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleStartingPort | 1.3.6.1.4.1.89.53.2.1.4 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The minimal number of the port residing on this module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleNumberOfPorts | 1.3.6.1.4.1.89.53.2.1.5 | INTEGER | RO | 28 | |||||||||||||||||
column · INTEGER · read-only · current The number of ports residing on this module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleRow | 1.3.6.1.4.1.89.53.2.1.6 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current On which row (the uppermost being numbered 1 and the highest row
number asigned to the lowest row) this module resides within the
chassis of its stack unit.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleColumn | 1.3.6.1.4.1.89.53.2.1.7 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this module resides within the chassis of its stack unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdModuleRole | 1.3.6.1.4.1.89.53.2.1.8 | INTEGER | RO | master(2) | |||||||||||||||||
column · INTEGER · read-only · current The module role in the stack.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdPortsTable | 1.3.6.1.4.1.89.53.3 | NA | |||||||||||||||||||
table · not-accessible · current Lists the physical or physical-related attributes of ports | |||||||||||||||||||||
| RrlPhdPortsEntry | 1.3.6.1.4.1.89.53.3.1 | NA | |||||||||||||||||||
row · not-accessible · current For each port, a entry describing attributes which are either physical or are derived from the features of the device hardware
| |||||||||||||||||||||
| CrlPhdPortsIfIndex | 1.3.6.1.4.1.89.53.3.1.1 | INTEGER | RO | 49 | |||||||||||||||||
column · INTEGER · read-only · current The L2 interface number associated with this port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsIfIndexName | 1.3.6.1.4.1.89.53.3.1.2 | DisplayString (SIZE (1..20)) | RO | gi1/0/1 | |||||||||||||||||
column · DisplayString (SIZE (1..20)) · read-only · current The L2 interface number associated with this port, in string format
based on the overall hardware architecture of the device (i.e., for
monolithic devices just numbers, devices composed of modules (boards,
cards) or stackable devices composed of monolithic units in form
<module /stack unit number> - <port number on current module /stack
unit number>, stackable devices in which each unit is composed of
modules
<stack unit number> - <module number> - <port number>Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsMediaType | 1.3.6.1.4.1.89.53.3.1.3 | INTEGER | RO | optic-fiber(2) | |||||||||||||||||
column · INTEGER · read-only · current The media type of this port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsStackUnit | 1.3.6.1.4.1.89.53.3.1.4 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The number of the slot to which this port belongs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsModuleNumber | 1.3.6.1.4.1.89.53.3.1.5 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The number of the stack unit to which this port resides in. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsRow | 1.3.6.1.4.1.89.53.3.1.6 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current On which row (the uppermost being numbered 1 and the highest row number asigned to the lowest row) this port resides within its module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortsColumn | 1.3.6.1.4.1.89.53.3.1.7 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current On which column (the leftmost being numbered 1 and the highest column number asigned to the rightmost column) this this port resides within its module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdConnectorType | 1.3.6.1.4.1.89.53.3.1.8 | JackType | RO | 1 | |||||||||||||||||
column · JackType · read-only · current Type of connector. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdPortHaul | 1.3.6.1.4.1.89.53.3.1.9 | INTEGER | RO | not-relevant(1) | |||||||||||||||||
column · INTEGER · read-only · current Distance supported by this port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdStackTable | 1.3.6.1.4.1.89.53.4 | NA | |||||||||||||||||||
table · not-accessible · current For each stack unit there is an entry describing it in this table | |||||||||||||||||||||
| RrlPhdStackEntry | 1.3.6.1.4.1.89.53.4.1 | NA | |||||||||||||||||||
| CrlPhdStackUnit | 1.3.6.1.4.1.89.53.4.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The stack unit described by this entry. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackType | 1.3.6.1.4.1.89.53.4.1.2 | INTEGER | RO | 4 | |||||||||||||||||
column · INTEGER · read-only · current The type of the stack unit described by this entry: 1 - box 3202 2 - box LG 3 - bcm 4 - prestera Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackConnect1 | 1.3.6.1.4.1.89.53.4.1.3 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current The unit number connected to the Hyper GLink left side connection - 0 means not connected; other integer indicates the unit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackConnect2 | 1.3.6.1.4.1.89.53.4.1.4 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current The unit number connected to the Hyper GLink right side connection - 0 means not connected; other integer indicates the unit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackSofrwareVer | 1.3.6.1.4.1.89.53.4.1.5 | DisplayString (SIZE (1..20)) | RO | 4.0.16 | |||||||||||||||||
column · DisplayString (SIZE (1..20)) · read-only · current The Software version of the unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackProductID | 1.3.6.1.4.1.89.53.4.1.6 | DisplayString (SIZE (1..128)) | RO | OmniStack LS 6224P | |||||||||||||||||
column · DisplayString (SIZE (1..128)) · read-only · current The Product ID of the unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdStackMacAddr | 1.3.6.1.4.1.89.53.4.1.7 | PhysAddress | RO | \xe8(\xc1\xa0}\x00 | |||||||||||||||||
column · PhysAddress · read-only · current The physical (MAC) address of the unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdModuleHotSwapTable | 1.3.6.1.4.1.89.53.5 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing its Hot Swap status | |||||||||||||||||||||
| RrlPhdModuleHotSwapEntry | 1.3.6.1.4.1.89.53.5.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a module (board) Hot Swap status | |||||||||||||||||||||
| CrlPhdModuleHotSwapAdminStatus | 1.3.6.1.4.1.89.53.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired state of the module. The off(1) state indicates
that the module is not used and its rlPhdModuleHotSwapOperStatus
is always off(2).
The on{1) state indicates that the module may be used and its
rlPhdModuleHotSwapOperStatus will be on(1) if it presents and
off(2) if it does not present.
| |||||||||||||||||||||
| CrlPhdModuleHotSwapOperStatus | 1.3.6.1.4.1.89.53.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present.
| |||||||||||||||||||||
| TrlPhdStackOrderTable | 1.3.6.1.4.1.89.53.6 | NA | |||||||||||||||||||
table · not-accessible · current This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If the stack units order was never configured, the order will be the same as in the rlPhdStackTable. | |||||||||||||||||||||
| RrlPhdStackOrderEntry | 1.3.6.1.4.1.89.53.6.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a stack unit in the position desired by the user | |||||||||||||||||||||
| CrlPhdStackOrderCurrentUnitPosition | 1.3.6.1.4.1.89.53.6.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The current stack unit position. | |||||||||||||||||||||
| CrlPhdStackOrderDesiredUnitPosition | 1.3.6.1.4.1.89.53.6.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The desired stack unit position. Note that setting this MIB object will take effect only after setting the rlPhdStackReorder MIB object below. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same. | |||||||||||||||||||||
| CrlPhdStackOrderUnitIndex | 1.3.6.1.4.1.89.53.6.1.3 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current This is the original unit index, i.e. has the same value as rlPhdStackUnit above. | |||||||||||||||||||||
| CrlPhdStackOrderUnitType | 1.3.6.1.4.1.89.53.6.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the stack unit described by this entry. It has the same value as rlPhdStackType above. This information is duplicated here only for easier retrieval by the device manager. | |||||||||||||||||||||
| SrlPhdStackReorder | 1.3.6.1.4.1.89.53.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further change of at least one instance of the rlPhdStackOrderDesiredUnitPosition object, the values of the rlPhdStackOrderCurrentUnitPosition objectinstance and the corresponding rlPhdStackOrderDesiredUnitPosition object instance will be the same.
| |||||||||||||||||||||
| SrlPhdNumberOfUnits | 1.3.6.1.4.1.89.53.8 | INTEGER | RO | 1 | |||||||||||||||||
scalar · INTEGER · read-only · current Shows the current number of units in the stack. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SrlPhdMaxNumberOfUnits | 1.3.6.1.4.1.89.53.9 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Shows the maximum number of units in the stack. | |||||||||||||||||||||
| SrlPhdForceMasterUnit | 1.3.6.1.4.1.89.53.10 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current Force unit to be master. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SrlPhdStackFixedUnit | 1.3.6.1.4.1.89.53.11 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current Determine which unit will be on bottom/top of list on Show-List command(see . Example values from LibreNMS test devices
| |||||||||||||||||||||
| SrlPhdStackFixedUnitLocation | 1.3.6.1.4.1.89.53.12 | INTEGER | RW | top(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Determine the bottom/top object in the stack table.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SrlPhdStackReloadUnit | 1.3.6.1.4.1.89.53.13 | INTEGER | RW | 0 | |||||||||||||||||
scalar · INTEGER · read-write · current Reset a specific unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdUnitGenParamTable | 1.3.6.1.4.1.89.53.14 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing it in this module | |||||||||||||||||||||
| RrlPhdUnitGenParamEntry | 1.3.6.1.4.1.89.53.14.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a module (board) | |||||||||||||||||||||
| CrlPhdUnitGenParamStackUnit | 1.3.6.1.4.1.89.53.14.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The index of the stack unit to which this conceptual row corresponds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamSoftwareVersion | 1.3.6.1.4.1.89.53.14.1.2 | DisplayString | RO | 1.7.0.13 | |||||||||||||||||
column · DisplayString · read-only · current Serial number of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamFirmwareVersion | 1.3.6.1.4.1.89.53.14.1.3 | DisplayString | RO | 1.0.0.0 | |||||||||||||||||
column · DisplayString · read-only · current Serial number of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamHardwareVersion | 1.3.6.1.4.1.89.53.14.1.4 | DisplayString | RO | 03.01.03 | |||||||||||||||||
column · DisplayString · read-only · current Serial number of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamSerialNum | 1.3.6.1.4.1.89.53.14.1.5 | DisplayString | RW | ES1D012471 | |||||||||||||||||
column · DisplayString · read-write · current Serial number of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamAssetTag | 1.3.6.1.4.1.89.53.14.1.6 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current Serial number of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamServiceTag | 1.3.6.1.4.1.89.53.14.1.7 | DisplayString | RO | MES2324FB | |||||||||||||||||
column · DisplayString · read-only · current Asset tag of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamSoftwareDate | 1.3.6.1.4.1.89.53.14.1.8 | DisplayString | RO | 2021-04-13 | |||||||||||||||||
column · DisplayString · read-only · current Date of product's software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamFirmwareDate | 1.3.6.1.4.1.89.53.14.1.9 | DisplayString | RO | Apr 13 2021 | |||||||||||||||||
column · DisplayString · read-only · current Date of product's firmware. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamManufacturer | 1.3.6.1.4.1.89.53.14.1.10 | DisplayString | RO | Eltex | |||||||||||||||||
column · DisplayString · read-only · current Product's Manufacturer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamModelName | 1.3.6.1.4.1.89.53.14.1.11 | DisplayString | RO | MES2124M AC | |||||||||||||||||
column · DisplayString · read-only · current Model Name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamMd5ChksumBoot | 1.3.6.1.4.1.89.53.14.1.12 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current MD5 Checksum for Boot Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamMd5ChksumImage1 | 1.3.6.1.4.1.89.53.14.1.13 | DisplayString | RO | f85bf8ad2b9e899cf2988752fa1feca9 | |||||||||||||||||
column · DisplayString · read-only · current MD5 Checksum for Image 1 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamMd5ChksumImage2 | 1.3.6.1.4.1.89.53.14.1.14 | DisplayString | RO | 1971cc44c11622513a7cab5d62d47622 | |||||||||||||||||
column · DisplayString · read-only · current MD5 Checksum for Image 2 Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamRegistrationDone | 1.3.6.1.4.1.89.53.14.1.15 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current Registration Done. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitGenParamRegistrationSuppressed | 1.3.6.1.4.1.89.53.14.1.16 | TruthValue | RW | 2 | |||||||||||||||||
column · TruthValue · read-write · current Registration Suppressed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPhdUnitEnvParamTable | 1.3.6.1.4.1.89.53.15 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing it in this module | |||||||||||||||||||||
| RrlPhdUnitEnvParamEntry | 1.3.6.1.4.1.89.53.15.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a module (board) | |||||||||||||||||||||
| CrlPhdUnitEnvParamStackUnit | 1.3.6.1.4.1.89.53.15.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in the entity MIB of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamMainPSStatus | 1.3.6.1.4.1.89.53.15.1.2 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the main PS being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamRedundantPSStatus | 1.3.6.1.4.1.89.53.15.1.3 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the redundant PS being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan1Status | 1.3.6.1.4.1.89.53.15.1.4 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 1 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan2Status | 1.3.6.1.4.1.89.53.15.1.5 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 2 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan3Status | 1.3.6.1.4.1.89.53.15.1.6 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 3 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan4Status | 1.3.6.1.4.1.89.53.15.1.7 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 4 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan5Status | 1.3.6.1.4.1.89.53.15.1.8 | RlEnvMonState | RO | 5 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 5 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamFan6Status | 1.3.6.1.4.1.89.53.15.1.9 | RlEnvMonState | RO | 41 | |||||||||||||||||
column · RlEnvMonState · read-only · current The mandatory state of the FAN 6 being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamTempSensorValue | 1.3.6.1.4.1.89.53.15.1.10 | EntitySensorValue | RO | 1 | |||||||||||||||||
column · EntitySensorValue · read-only · current Current value for the Sensor being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamTempSensorStatus | 1.3.6.1.4.1.89.53.15.1.11 | EntitySensorStatus | RO | 11791100 (1d 8h 45m 11s) | |||||||||||||||||
column · EntitySensorStatus · read-only · current Status value for the Sensor being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamTempSensorWarningThresholdValue | 1.3.6.1.4.1.89.53.15.1.12 | EntitySensorValue | RO | 0 | |||||||||||||||||
column · EntitySensorValue · read-only · current Temperature warning threshold value for the Sensor being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamTempSensorCriticalThresholdValue | 1.3.6.1.4.1.89.53.15.1.13 | EntitySensorValue | RO | 4 | |||||||||||||||||
column · EntitySensorValue · read-only · current Temperature critical threshold value for the Sensor being instrumented. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamUpTime | 1.3.6.1.4.1.89.53.15.1.14 | TimeTicks | RO | 0 | |||||||||||||||||
column · TimeTicks · read-only · current Up time of the unit in 100th of second (sec/100). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamMonitorAutoRecoveryEnable | 1.3.6.1.4.1.89.53.15.1.15 | TruthValue | RW | 4 | |||||||||||||||||
column · TruthValue · read-write · current Disable environment automatic recovery option Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamMonitorTemperatureStatus | 1.3.6.1.4.1.89.53.15.1.16 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Display environment monitoring chassis temperature status
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPhdUnitEnvParamMonitorOperStatus | 1.3.6.1.4.1.89.53.15.1.17 | TruthValue | RO | 4 | |||||||||||||||||
column · TruthValue · read-only · current Display environment automatic recovery current status (active/not active) Example values from LibreNMS test devices
| |||||||||||||||||||||
| SrlPhdStackOrderTopUnit | 1.3.6.1.4.1.89.53.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This scalar mib holds the Top unit for the stack order command | |||||||||||||||||||||
| SrlPhdStackOrderBottomUnit | 1.3.6.1.4.1.89.53.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This scalar mib holds the Bottom unit for the stack order command | |||||||||||||||||||||
| SrlPhdStackOrderPermutation | 1.3.6.1.4.1.89.53.18 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||||||||||
scalar · OCTET STRING (SIZE (1..32)) · read-write · current This scalar mib holds stack permutation | |||||||||||||||||||||
| SrlPhdNumberOfPoeUnits | 1.3.6.1.4.1.89.53.19 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Shows the current number of poe units in the stack. | |||||||||||||||||||||
| TrlPhdPoeTable | 1.3.6.1.4.1.89.53.20 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing it in this module | |||||||||||||||||||||
| RrlPhdPoeEntry | 1.3.6.1.4.1.89.53.20.1 | NA | |||||||||||||||||||
row · not-accessible · current A entry of this table specifies a module (board)
| |||||||||||||||||||||
| CrlPhdPoeStackUnit | 1.3.6.1.4.1.89.53.20.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The stack unit to which this module belongs. | |||||||||||||||||||||
| CrlPhdPoePresent | 1.3.6.1.4.1.89.53.20.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present state of the PoE module. The no(1) state indicates
that the PoE module is not present. The yes{2) state indicates that the
PoE module is present.
| |||||||||||||||||||||
| SrlPhdPhyLedStackUnit | 1.3.6.1.4.1.89.53.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This scalar mib holds the unit number for the stack light command | |||||||||||||||||||||
| SrlPhdPhyLedTimeout | 1.3.6.1.4.1.89.53.22 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state. | |||||||||||||||||||||
| TrlCascadeTable | 1.3.6.1.4.1.89.53.23 | NA | |||||||||||||||||||
table · not-accessible · current For each cascaded port for stacking unit there is an entry describing it in this table | |||||||||||||||||||||
| RrlCascadeEntry | 1.3.6.1.4.1.89.53.23.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of this table specifies a cascaded link information in a unit
| |||||||||||||||||||||
| CrlCascadeNeighborIfIndex | 1.3.6.1.4.1.89.53.23.1.1 | InterfaceIndexOrZero | RO | ||||||||||||||||||
column · InterfaceIndexOrZero · read-only · current The ifIndex of a stacking port in the neighbor unit - 0 means not connected; other integer indicates the IfIndex. | |||||||||||||||||||||
| CrlCascadeNeighborUnit | 1.3.6.1.4.1.89.53.23.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The unit number of the neighbor unit - 0 means not connected; other integer indicates the unit number. | |||||||||||||||||||||
| CrlCascadeTrunkId | 1.3.6.1.4.1.89.53.23.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The id of the trunk, the stacking port is member, zero if the port is not member of trunk. | |||||||||||||||||||||
| CrlCascadeUnitId | 1.3.6.1.4.1.89.53.23.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The unit number matching the current ifIndex | |||||||||||||||||||||
| CrlCascadePortSpeed | 1.3.6.1.4.1.89.53.23.1.5 | CascadePortSpeed | RO | ||||||||||||||||||
column · CascadePortSpeed · read-only · current Port speed | |||||||||||||||||||||
| CrlCascadePortState | 1.3.6.1.4.1.89.53.23.1.6 | CascadePortState | RO | ||||||||||||||||||
column · CascadePortState · read-only · current Port state according to cascade LAG state machine | |||||||||||||||||||||
| TrlCascadeAdminTable | 1.3.6.1.4.1.89.53.24 | NA | |||||||||||||||||||
table · not-accessible · current For each unit there is an entry describing its cascade ports and speed after reset | |||||||||||||||||||||
| RrlCascadeAdminEntry | 1.3.6.1.4.1.89.53.24.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of this table specifies a cascaded information in a unit after reset
| |||||||||||||||||||||
| CrlCascadeAdminUnitId | 1.3.6.1.4.1.89.53.24.1.1 | INTEGER (0 | 1..8) | NA | ||||||||||||||||||
column · INTEGER (0 | 1..8) · not-accessible · current The active unit number. Unit id 0 means configure all units. | |||||||||||||||||||||
| CrlCascadeAdminIndexList | 1.3.6.1.4.1.89.53.24.1.2 | OCTET STRING (SIZE (1..16)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (1..16)) · read-write · current Indicates the stack ports indexes list. A set of indexes that are identified by a bit-map, in which each index is represented as a bit. | |||||||||||||||||||||
| CrlCascadeAdminSpeed | 1.3.6.1.4.1.89.53.24.1.3 | CascadePortSpeed | RW | ||||||||||||||||||
column · CascadePortSpeed · read-write · current Cascade port speed | |||||||||||||||||||||
| TrlPhdUnitStackPortTable | 1.3.6.1.4.1.89.53.25 | NA | |||||||||||||||||||
table · not-accessible · current The table listing information required for stack port. The index for the table is ifindex; the ports that represented in that table are operational stack ports or ports that can be stack ports after reset | |||||||||||||||||||||
| RrlPhdUnitStackPortEntry | 1.3.6.1.4.1.89.53.25.1 | NA | |||||||||||||||||||
| CrlPhdUnitStackPortName | 1.3.6.1.4.1.89.53.25.1.1 | DisplayString (SIZE (1..50)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..50)) · read-only · current Stack port name | |||||||||||||||||||||
| CrlPhdUnitStackPortType | 1.3.6.1.4.1.89.53.25.1.2 | StackPortType | RO | ||||||||||||||||||
column · StackPortType · read-only · current Stack port type | |||||||||||||||||||||
| CrlPhdUnitStackPortConnectionType | 1.3.6.1.4.1.89.53.25.1.3 | ConnectionType | RO | ||||||||||||||||||
column · ConnectionType · read-only · current Operational connection type (copper(1), combo-copper(2), combo-fiber(3), fiber(4), direct-Attached(5)) | |||||||||||||||||||||
| CrlPhdUnitStackPortRow | 1.3.6.1.4.1.89.53.25.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current On which row (the uppermost being numbered 1 and the highest row number assigned to the lowest row) this actual/candidate cascade port resides within the chassis of its stack unit. | |||||||||||||||||||||
| CrlPhdUnitStackPortColumn | 1.3.6.1.4.1.89.53.25.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current On which column (the leftmost being numbered 1 and the highest column
number assigned to the rightmost column) this actual/candidate cascade
port resides within the chassis of its stack unit. | |||||||||||||||||||||
Traps / Notifications
- rlStackBackupUnitRemoved
1.3.6.1.4.1.89.0.188 - rlStackConfigChangedRingChain
1.3.6.1.4.1.89.0.187 - rlStackDuplicateUnitNotJoin
1.3.6.1.4.1.89.0.191 - rlStackLinkChange
1.3.6.1.4.1.89.0.195 - rlStackMasterSwitchover
1.3.6.1.4.1.89.0.189 - rlStackUnitDifferentSwVersion
1.3.6.1.4.1.89.0.190 - rlStackUnitRemoved
1.3.6.1.4.1.89.0.186