RADLAN-BRIDGEMIBOBJECTS-MIB
RNDThis private MIB module defines bridge MIB objects private MIBs.
snmptranslate -m RADLAN-BRIDGEMIBOBJECTS-MIB -Tpsnmpwalk -v2c -c <community> -m RADLAN-BRIDGEMIBOBJECTS-MIB <host> 1.3.6.1.4.1.89.57Imports
| BRIDGE-MIB | BridgeId, Timeout, dot1dBasePort, dot1dStpPort |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| Q-BRIDGE-MIB | PortList |
| RADLAN-MIB | rnd |
| RFC1155-SMI | Counter32 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlpBridgeMIBObjects | 1.3.6.1.4.1.89.57 | |||
identity This private MIB module defines bridge MIB objects private MIBs. | ||||
| Nrldot1dPriority | 1.3.6.1.4.1.89.57.1 | |||
| Srldot1dPriorityMibVersion | 1.3.6.1.4.1.89.57.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 1. | ||||
| Trldot1dPriorityPortGroupTable | 1.3.6.1.4.1.89.57.1.2 | NA | ||
table · not-accessible · current A list of PortGroupNumber for each port. | ||||
| Rrldot1dPriorityPortGroupEntry | 1.3.6.1.4.1.89.57.1.2.1 | NA | ||
row · not-accessible · current All ports belonging to a same group have the same User Priority to Traffic Class mapping.
| ||||
| Crldot1dPriorityPortGroupNumber | 1.3.6.1.4.1.89.57.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping. | ||||
| Nrldot1dStp | 1.3.6.1.4.1.89.57.2 | |||
| Srldot1dStpMibVersion | 1.3.6.1.4.1.89.57.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 2. | ||||
| Srldot1dStpType | 1.3.6.1.4.1.89.57.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specifies whether the device supports Spanning Tree per device, or per group.
| ||||
| Srldot1dStpEnable | 1.3.6.1.4.1.89.57.2.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans. | ||||
| Srldot1dStpPortMustBelongToVlan | 1.3.6.1.4.1.89.57.2.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether a port must belong to a VLAN in order to participate in the STP. | ||||
| Srldot1dStpExtendedPortNumberFormat | 1.3.6.1.4.1.89.57.2.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether the STP uses the extended port fnumber format. | ||||
| Trldot1dStpVlanTable | 1.3.6.1.4.1.89.57.2.6 | NA | ||
table · not-accessible · current A table that contains vlan-specific information for the Spanning Tree Protocol. | ||||
| Rrldot1dStpVlanEntry | 1.3.6.1.4.1.89.57.2.6.1 | NA | ||
row · not-accessible · current A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
| ||||
| Crldot1dStpVlan | 1.3.6.1.4.1.89.57.2.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The Vlan index. | ||||
| Crldot1dStpVlanEnable | 1.3.6.1.4.1.89.57.2.6.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Specifies whether this vlan is STP enable or disable | ||||
| Crldot1dStpTimeSinceTopologyChange | 1.3.6.1.4.1.89.57.2.6.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. | ||||
| Crldot1dStpTopChanges | 1.3.6.1.4.1.89.57.2.6.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of topology changes detected by this bridge since the management entity was last reset or initialized. | ||||
| Crldot1dStpDesignatedRoot | 1.3.6.1.4.1.89.57.2.6.1.5 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| Crldot1dStpRootCost | 1.3.6.1.4.1.89.57.2.6.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The cost of the path to the root as seen from this bridge. | ||||
| Crldot1dStpRootPort | 1.3.6.1.4.1.89.57.2.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge. | ||||
| Crldot1dStpMaxAge | 1.3.6.1.4.1.89.57.2.6.1.8 | Timeout | RO | |
column · Timeout · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| Crldot1dStpHelloTime | 1.3.6.1.4.1.89.57.2.6.1.9 | Timeout | RO | |
column · Timeout · read-only · current The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| Crldot1dStpHoldTime | 1.3.6.1.4.1.89.57.2.6.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| Crldot1dStpForwardDelay | 1.3.6.1.4.1.89.57.2.6.1.11 | Timeout | RO | |
column · Timeout · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | ||||
| Trldot1dStpVlanPortTable | 1.3.6.1.4.1.89.57.2.7 | NA | ||
table · not-accessible · current A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol. | ||||
| Rrldot1dStpVlanPortEntry | 1.3.6.1.4.1.89.57.2.7.1 | NA | ||
row · not-accessible · current A list of information maintained by every pair <vlan, port> about the Spanning Tree Protocol state for that pair. | ||||
| Crldot1dStpVlanPortVlan | 1.3.6.1.4.1.89.57.2.7.1.1 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1dStpVlanPortPort | 1.3.6.1.4.1.89.57.2.7.1.2 | INTEGER (1..4096) | RO | |
column · INTEGER (1..4096) · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1dStpVlanPortPriority | 1.3.6.1.4.1.89.57.2.7.1.3 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort. | ||||
| Crldot1dStpVlanPortState | 1.3.6.1.4.1.89.57.2.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
| ||||
| Crldot1dStpVlanPortEnable | 1.3.6.1.4.1.89.57.2.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The enabled/disabled status of the port.
| ||||
| Crldot1dStpVlanPortPathCost | 1.3.6.1.4.1.89.57.2.7.1.6 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | ||||
| Crldot1dStpVlanPortDesignatedRoot | 1.3.6.1.4.1.89.57.2.7.1.7 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| Crldot1dStpVlanPortDesignatedCost | 1.3.6.1.4.1.89.57.2.7.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| Crldot1dStpVlanPortDesignatedBridge | 1.3.6.1.4.1.89.57.2.7.1.9 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| Crldot1dStpVlanPortDesignatedPort | 1.3.6.1.4.1.89.57.2.7.1.10 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| Crldot1dStpVlanPortForwardTransitions | 1.3.6.1.4.1.89.57.2.7.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| Nrldot1dStpTrapVariable | 1.3.6.1.4.1.89.57.2.8 | |||
| Srldot1dStpTrapVrblifIndex | 1.3.6.1.4.1.89.57.2.8.1 | InterfaceIndex | RO | |
scalar · InterfaceIndex · read-only · current The ifIndex of port which STP status was changed | ||||
| Srldot1dStpTrapVrblVID | 1.3.6.1.4.1.89.57.2.8.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The VID of VLAN to which the port belongs which STP status was changed | ||||
| Srldot1dStpTypeAfterReset | 1.3.6.1.4.1.89.57.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current New mode of spaning tree supported by the device after the next reset.
| ||||
| Srldot1dStpMonitorTime | 1.3.6.1.4.1.89.57.2.10 | INTEGER (1..20) | RW | |
scalar · INTEGER (1..20) · read-write · current Factor of hello-time during which a port is monotored to determine if it is stable. | ||||
| Srldot1dStpBpduCount | 1.3.6.1.4.1.89.57.2.11 | INTEGER (1..60) | RW | |
scalar · INTEGER (1..60) · read-write · current The number of bpdu that need to received for the link to be considered stable. | ||||
| Srldot1dStpLastChanged | 1.3.6.1.4.1.89.57.2.12 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The last time any object in this table was changed by SNMP or other local management means. | ||||
| Trldot1dStpPortTable | 1.3.6.1.4.1.89.57.2.13 | NA | ||
table · not-accessible · current A table that contains extended pair port specific information. | ||||
| Rrldot1dStpPortEntry | 1.3.6.1.4.1.89.57.2.13.1 | NA | ||
row · not-accessible · current A list of information maintained by every port about the Spanning Tree Protocol state for that port.
| ||||
| Crldot1dStpPortPort | 1.3.6.1.4.1.89.57.2.13.1.1 | INTEGER (1..4096) | RO | |
column · INTEGER (1..4096) · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1dStpPortDampEnable | 1.3.6.1.4.1.89.57.2.13.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Specified if dampening is enabled on this port. | ||||
| Crldot1dStpPortDampStable | 1.3.6.1.4.1.89.57.2.13.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Specified if the port is stable. | ||||
| Crldot1dStpPortFilterBpdu | 1.3.6.1.4.1.89.57.2.13.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Specified if this port should filter bpdus when stp is disabled.
| ||||
| Crldot1dStpPortBpduSent | 1.3.6.1.4.1.89.57.2.13.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Specified the number of bpdu sent from this port. | ||||
| Crldot1dStpPortBpduReceived | 1.3.6.1.4.1.89.57.2.13.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Specified the number of bpdu received in this port. | ||||
| Crldot1dStpPortRole | 1.3.6.1.4.1.89.57.2.13.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Specified the role of this this port.
| ||||
| Crldot1dStpBpduType | 1.3.6.1.4.1.89.57.2.13.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Specified the type of BPDU transmitted by this port.
| ||||
| Crldot1dStpPortRestrictedRole | 1.3.6.1.4.1.89.57.2.13.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. | ||||
| Crldot1dStpPortAutoEdgePort | 1.3.6.1.4.1.89.57.2.13.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state. | ||||
| Crldot1dStpPortLoopback | 1.3.6.1.4.1.89.57.2.13.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current Specified loopback was detected on port. Usable for only a short period of time if stp loopback guard is enabled (since port enters into shutdown state). | ||||
| Crldot1dStpPortBpduOperStatus | 1.3.6.1.4.1.89.57.2.13.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Specified BPDU handling operative status for port.
| ||||
| Srldot1dStpPortsEnable | 1.3.6.1.4.1.89.57.2.14 | TruthValue | RO | |
scalar · TruthValue · read-only · current Enable / Disable spanning tree on ports by default . | ||||
| Srldot1dStpTaggedFlooding | 1.3.6.1.4.1.89.57.2.15 | TruthValue | RO | |
scalar · TruthValue · read-only · current flooding can be done in tagged bpdu . | ||||
| Srldot1dStpPortBelongToVlanDefault | 1.3.6.1.4.1.89.57.2.16 | TruthValue | RO | |
scalar · TruthValue · read-only · current The default value of rldot1dStpPortMustBelongToVlan . | ||||
| Srldot1dStpEnableByDefault | 1.3.6.1.4.1.89.57.2.17 | TruthValue | RO | |
scalar · TruthValue · read-only · current The default value of rldot1dStpEnable . | ||||
| Srldot1dStpPortToDefault | 1.3.6.1.4.1.89.57.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current To order port/s to revert to default setings . | ||||
| Srldot1dStpSupportedType | 1.3.6.1.4.1.89.57.2.19 | INTEGER | RO | |
scalar · INTEGER · read-only · current The type of stp supported by the device.
| ||||
| Srldot1dStpEdgeportSupportInStp | 1.3.6.1.4.1.89.57.2.20 | TruthValue | RO | |
scalar · TruthValue · read-only · current If EdgePort is supported in stpCompatible mode . | ||||
| Srldot1dStpFilterBpdu | 1.3.6.1.4.1.89.57.2.21 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specified if the device should filter BPDUs when STP is disabled. | ||||
| Srldot1dStpFloodBpduMethod | 1.3.6.1.4.1.89.57.2.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
| ||||
| Nrldot1dStpSeparatedBridges | 1.3.6.1.4.1.89.57.2.23 | |||
| Trldot1dStpSeparatedBridgesTable | 1.3.6.1.4.1.89.57.2.23.1 | NA | ||
table · not-accessible · current Define if separated bridges feature is enabled for each interface. | ||||
| Rrldot1dStpSeparatedBridgesEntry | 1.3.6.1.4.1.89.57.2.23.1.1 | NA | ||
row · not-accessible · current Defines the contents of each line in the rlSeparatedBridgesTable table.
| ||||
| Crldot1dStpSeparatedBridgesPortEnable | 1.3.6.1.4.1.89.57.2.23.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current This variable indicates whether the separated bridge feature is enabled on a specified ifIndex. | ||||
| Srldot1dStpSeparatedBridgesEnable | 1.3.6.1.4.1.89.57.2.23.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable / Disable Separated Bridges Feature. | ||||
| Srldot1dStpSeparatedBridgesAutoConfig | 1.3.6.1.4.1.89.57.2.23.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable / Disable Separated Bridges Automatic Configuration. | ||||
| Trldot1dStpPortBpduGuardTable | 1.3.6.1.4.1.89.57.2.24 | NA | ||
table · not-accessible · current A table that contains for each port whether it is bpdu guard . | ||||
| Rrldot1dStpPortBpduGuardEntry | 1.3.6.1.4.1.89.57.2.24.1 | NA | ||
row · not-accessible · current A list of information maintained by every port whether it is bpdu guard.
| ||||
| Crldot1dStpPortBpduGuardEnable | 1.3.6.1.4.1.89.57.2.24.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Specified if bpdu guard is enabled on this port. | ||||
| Srldot1dStpLoopbackGuardEnable | 1.3.6.1.4.1.89.57.2.25 | TruthValue | RW | |
scalar · TruthValue · read-write · current Define if STP loopback guard feature is globally enabled. | ||||
| Trldot1dStpDisabledPortStateTable | 1.3.6.1.4.1.89.57.2.26 | NA | ||
table · not-accessible · current Define stp port state for each stp disabled interface. This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port. The MIB contains only stp disabled ports entries | ||||
| Rrldot1dStpDisabledPortStateEntry | 1.3.6.1.4.1.89.57.2.26.1 | NA | ||
row · not-accessible · current Defines the contents of each line in the rldot1dStpDisabledPortStateTable table.
| ||||
| Crldot1dStpDisabledPortState | 1.3.6.1.4.1.89.57.2.26.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The port's stp state as defined by external application . This state controls what action a port takes on reception of a frame.
| ||||
| Nrldot1dExtBase | 1.3.6.1.4.1.89.57.3 | |||
| Srldot1dExtBaseMibVersion | 1.3.6.1.4.1.89.57.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 1. | ||||
| Srldot1dDeviceCapabilities | 1.3.6.1.4.1.89.57.3.2 | OCTET STRING (SIZE (1)) | RO | |
scalar · OCTET STRING (SIZE (1)) · read-only · current Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. | ||||
| Nrldot1wRStp | 1.3.6.1.4.1.89.57.4 | |||
| Trldot1wRStpVlanEdgePortTable | 1.3.6.1.4.1.89.57.4.1 | NA | ||
table · not-accessible · current A table that contains pair <vlan, port> specific information for the Rapid Spanning Tree Protocol. | ||||
| Rrldot1wRStpVlanEdgePortEntry | 1.3.6.1.4.1.89.57.4.1.1 | NA | ||
row · not-accessible · current A list of information maintained by every pair <vlan, port> about the RAPID Spanning Tree Protocol state for that pair. | ||||
| Crldot1wRStpVlanEdgePortVlan | 1.3.6.1.4.1.89.57.4.1.1.1 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed. | ||||
| Crldot1wRStpVlanEdgePortPort | 1.3.6.1.4.1.89.57.4.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1wRStpEdgePortStatus | 1.3.6.1.4.1.89.57.4.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Specifies whether this port is an Edge Port or not | ||||
| Trldot1wRStpForceVersionTable | 1.3.6.1.4.1.89.57.4.2 | NA | ||
table · not-accessible · current A table that contains <vlan> specific information for the Rapid Spanning Tree Protocol. | ||||
| Rrldot1wRStpForceVersionEntry | 1.3.6.1.4.1.89.57.4.2.1 | NA | ||
row · not-accessible · current A list of information maintained by every <vlan> about the RAPID Spanning Tree Protocol state for that pair. | ||||
| Crldot1wRStpForceVersionVlan | 1.3.6.1.4.1.89.57.4.2.1.1 | INTEGER (1..4095) | RO | |
column · INTEGER (1..4095) · read-only · current The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed. | ||||
| Crldot1wRStpForceVersionState | 1.3.6.1.4.1.89.57.4.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP | ||||
| Nrldot1pPriorityMap | 1.3.6.1.4.1.89.57.5 | |||
| Srldot1pPriorityMapState | 1.3.6.1.4.1.89.57.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current enable / disable
| ||||
| Trldot1pPriorityMapTable | 1.3.6.1.4.1.89.57.5.2 | NA | ||
table · not-accessible · current This table hold information the priority maps | ||||
| Rrldot1pPriorityMapEntry | 1.3.6.1.4.1.89.57.5.2.1 | NA | ||
| Crldot1pPriorityMapName | 1.3.6.1.4.1.89.57.5.2.1.1 | DisplayString (SIZE (1..25)) | RO | |
column · DisplayString (SIZE (1..25)) · read-only · current The map name | ||||
| Crldot1pPriorityMapPriority | 1.3.6.1.4.1.89.57.5.2.1.2 | OCTET STRING (SIZE (8)) | RC | |
column · OCTET STRING (SIZE (8)) · read-create · current The map holding the queue | ||||
| Crldot1pPriorityMapPort | 1.3.6.1.4.1.89.57.5.2.1.3 | PortList | RC | |
column · PortList · read-create · current the port that the map, is applied on in config | ||||
| Crldot1pPriorityMapPortList | 1.3.6.1.4.1.89.57.5.2.1.4 | PortList | RO | |
column · PortList · read-only · current the ports that the map, is applied on in actual | ||||
| Crldot1pPriorityMapStatus | 1.3.6.1.4.1.89.57.5.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the table entry. It's used to delete an entry | ||||
| Nrldot1sMstp | 1.3.6.1.4.1.89.57.6 | |||
| Trldot1sMstpInstanceTable | 1.3.6.1.4.1.89.57.6.1 | NA | ||
table · not-accessible · current A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol. | ||||
| Rrldot1sMstpInstanceEntry | 1.3.6.1.4.1.89.57.6.1.1 | NA | ||
row · not-accessible · current A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance. | ||||
| Crldot1sMstpInstanceId | 1.3.6.1.4.1.89.57.6.1.1.1 | INTEGER (1..64) | RO | |
column · INTEGER (1..64) · read-only · current The Instance index. | ||||
| Crldot1sMstpInstanceEnable | 1.3.6.1.4.1.89.57.6.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Specifies whether this Instance is STP enable or disable | ||||
| Crldot1sMstpInstanceTimeSinceTopologyChange | 1.3.6.1.4.1.89.57.6.1.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance . | ||||
| Crldot1sMstpInstanceTopChanges | 1.3.6.1.4.1.89.57.6.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of topology changes detected by this Instance since the management entity was last reset or initialized. | ||||
| Crldot1sMstpInstanceDesignatedRoot | 1.3.6.1.4.1.89.57.6.1.1.5 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. | ||||
| Crldot1sMstpInstanceRootCost | 1.3.6.1.4.1.89.57.6.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The cost of the path to the root as seen from this bridge. | ||||
| Crldot1sMstpInstanceRootPort | 1.3.6.1.4.1.89.57.6.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge. | ||||
| Crldot1sMstpInstanceMaxAge | 1.3.6.1.4.1.89.57.6.1.1.8 | Timeout | RO | |
column · Timeout · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| Crldot1sMstpInstanceHelloTime | 1.3.6.1.4.1.89.57.6.1.1.9 | Timeout | RO | |
column · Timeout · read-only · current The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| Crldot1sMstpInstanceHoldTime | 1.3.6.1.4.1.89.57.6.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| Crldot1sMstpInstanceForwardDelay | 1.3.6.1.4.1.89.57.6.1.1.11 | Timeout | RO | |
column · Timeout · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | ||||
| Crldot1sMstpInstancePriority | 1.3.6.1.4.1.89.57.6.1.1.12 | INTEGER (0..61440) | RW | |
column · INTEGER (0..61440) · read-write · current The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. | ||||
| Crldot1sMstpInstanceRemainingHopes | 1.3.6.1.4.1.89.57.6.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This count value determines the amount of hopes the information transmited by this bridge on this instance can travel. | ||||
| Trldot1sMstpInstancePortTable | 1.3.6.1.4.1.89.57.6.2 | NA | ||
table · not-accessible · current A table that contains pair <msti, port> specific information for the Spanning Tree Protocol. | ||||
| Rrldot1sMstpInstancePortEntry | 1.3.6.1.4.1.89.57.6.2.1 | NA | ||
row · not-accessible · current A list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair. | ||||
| Crldot1sMstpInstancePortMstiId | 1.3.6.1.4.1.89.57.6.2.1.1 | INTEGER (1..64) | RO | |
column · INTEGER (1..64) · read-only · current The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1sMstpInstancePortPort | 1.3.6.1.4.1.89.57.6.2.1.2 | INTEGER (1..4096) | RO | |
column · INTEGER (1..4096) · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1sMstpInstancePortPriority | 1.3.6.1.4.1.89.57.6.2.1.3 | INTEGER (0..240) | RW | |
column · INTEGER (0..240) · read-write · current The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort. | ||||
| Crldot1sMstpInstancePortState | 1.3.6.1.4.1.89.57.6.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1).
| ||||
| Crldot1sMstpInstancePortEnable | 1.3.6.1.4.1.89.57.6.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The enabled/disabled status of the port.
| ||||
| Crldot1sMstpInstancePortPathCost | 1.3.6.1.4.1.89.57.6.2.1.6 | INTEGER (1..200000000) | RO | |
column · INTEGER (1..200000000) · read-only · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | ||||
| Crldot1sMstpInstancePortDesignatedRoot | 1.3.6.1.4.1.89.57.6.2.1.7 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| Crldot1sMstpInstancePortDesignatedCost | 1.3.6.1.4.1.89.57.6.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| Crldot1sMstpInstancePortDesignatedBridge | 1.3.6.1.4.1.89.57.6.2.1.9 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| Crldot1sMstpInstancePortDesignatedPort | 1.3.6.1.4.1.89.57.6.2.1.10 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| Crldot1sMstpInstancePortForwardTransitions | 1.3.6.1.4.1.89.57.6.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| Crldot1sMStpInstancePortAdminPathCost | 1.3.6.1.4.1.89.57.6.2.1.12 | INTEGER (0..200000000) | RW | |
column · INTEGER (0..200000000) · read-write · current The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost. | ||||
| Crldot1sMStpInstancePortRole | 1.3.6.1.4.1.89.57.6.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Specify the role of this this port.
| ||||
| Srldot1sMstpMaxHopes | 1.3.6.1.4.1.89.57.6.3 | INTEGER (1..40) | RW | |
scalar · INTEGER (1..40) · read-write · current Max number of hopes that an MST BPDU will travel inside a region. | ||||
| Srldot1sMstpConfigurationName | 1.3.6.1.4.1.89.57.6.4 | SnmpAdminString | RO | |
scalar · SnmpAdminString · read-only · current The active configuration name as will be caried in MST BPDU's. | ||||
| Srldot1sMstpRevisionLevel | 1.3.6.1.4.1.89.57.6.5 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current The active revision level. | ||||
| Trldot1sMstpVlanTable | 1.3.6.1.4.1.89.57.6.6 | NA | ||
table · not-accessible · current A table that contains information about the alocation of vlans to groups. | ||||
| Rrldot1sMstpVlanEntry | 1.3.6.1.4.1.89.57.6.6.1 | NA | ||
row · not-accessible · current A list of information maintained by every vlan about the group it belongs to.
| ||||
| Crldot1sMstpVlan | 1.3.6.1.4.1.89.57.6.6.1.1 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1sMstpGroup | 1.3.6.1.4.1.89.57.6.6.1.2 | INTEGER (0..64) | RO | |
column · INTEGER (0..64) · read-only · current Specifid the active group number this vlan belonges to. | ||||
| Crldot1sMstpPendingGroup | 1.3.6.1.4.1.89.57.6.6.1.3 | INTEGER (0..64) | RW | |
column · INTEGER (0..64) · read-write · current Specifid the pending group number this vlan belonges to. | ||||
| Trldot1sMstpExtPortTable | 1.3.6.1.4.1.89.57.6.7 | NA | ||
table · not-accessible · current A table that contains MSTP information about ports of the CIST. | ||||
| Rrldot1sMstpExtPortEntry | 1.3.6.1.4.1.89.57.6.7.1 | NA | ||
row · not-accessible · current A list of information maintained by every port of the CIST. | ||||
| Crldot1sMstpExtPortPort | 1.3.6.1.4.1.89.57.6.7.1.1 | INTEGER (1..4096) | RO | |
column · INTEGER (1..4096) · read-only · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Crldot1sMstpExtPortInternalOperPathCost | 1.3.6.1.4.1.89.57.6.7.1.2 | INTEGER (1..200000000) | RO | |
column · INTEGER (1..200000000) · read-only · current The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | ||||
| Crldot1sMstpExtPortDesignatedRegionalRoot | 1.3.6.1.4.1.89.57.6.7.1.3 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| Crldot1sMstpExtPortDesignatedRegionalCost | 1.3.6.1.4.1.89.57.6.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| Crldot1sMstpExtPortBoundary | 1.3.6.1.4.1.89.57.6.7.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Indication if the port is conented to to a lan segment outside or inside the region. | ||||
| Crldot1sMstpExtPortInternalAdminPathCost | 1.3.6.1.4.1.89.57.6.7.1.6 | INTEGER (0..200000000) | RW | |
column · INTEGER (0..200000000) · read-write · current The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost. | ||||
| Srldot1sMstpDesignatedMaxHopes | 1.3.6.1.4.1.89.57.6.8 | INTEGER (1..40) | RO | |
scalar · INTEGER (1..40) · read-only · current Max number of hopes that an MST BPDU will travel inside a region. | ||||
| Srldot1sMstpRegionalRoot | 1.3.6.1.4.1.89.57.6.9 | BridgeId | RO | |
scalar · BridgeId · read-only · current CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root. | ||||
| Srldot1sMstpRegionalRootCost | 1.3.6.1.4.1.89.57.6.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current The CIST path cost from the transmitting Bridge to the CIST Regional Root. | ||||
| Srldot1sMstpPendingConfigurationName | 1.3.6.1.4.1.89.57.6.11 | SnmpAdminString (SIZE (1..32)) | RW | |
scalar · SnmpAdminString (SIZE (1..32)) · read-write · current The pending configuration name. | ||||
| Srldot1sMstpPendingRevisionLevel | 1.3.6.1.4.1.89.57.6.12 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current The pending revision level. | ||||
| Srldot1sMstpPendingAction | 1.3.6.1.4.1.89.57.6.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one.
| ||||
| Srldot1sMstpRemainingHops | 1.3.6.1.4.1.89.57.6.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current This count value determines the amount of hops the information transmitted by this bridge can travel. | ||||
| Trldot1sMstpInstanceVlanTable | 1.3.6.1.4.1.89.57.6.15 | NA | ||
table · not-accessible · current This table contains vlan lists per MSTP instances. | ||||
| Rrldot1sMstpInstanceVlanEntry | 1.3.6.1.4.1.89.57.6.15.1 | NA | ||
row · not-accessible · current The entry contains vlan lists per specific MSTP instance. | ||||
| Crldot1sMstpInstanceVlanId | 1.3.6.1.4.1.89.57.6.15.1.1 | INTEGER (0..64) | RO | |
column · INTEGER (0..64) · read-only · current Specifiy the instance number. | ||||
| Crldot1sMstpInstanceVlanId1To1024 | 1.3.6.1.4.1.89.57.6.15.1.2 | VlanList1 | RO | |
column · VlanList1 · read-only · current first VlanId List of specific MSTP instance. | ||||
| Crldot1sMstpInstanceVlanId1025To2048 | 1.3.6.1.4.1.89.57.6.15.1.3 | VlanList2 | RO | |
column · VlanList2 · read-only · current second VlanId List of specific MSTP instance. | ||||
| Crldot1sMstpInstanceVlanId2049To3072 | 1.3.6.1.4.1.89.57.6.15.1.4 | VlanList3 | RO | |
column · VlanList3 · read-only · current third VlanId List of specific MSTP instance. | ||||
| Crldot1sMstpInstanceVlanId3073To4094 | 1.3.6.1.4.1.89.57.6.15.1.5 | VlanList4 | RO | |
column · VlanList4 · read-only · current fourth VlanId List of specific MSTP instance. | ||||
| Nrldot1dTpAgingTime | 1.3.6.1.4.1.89.57.7 | |||
| Srldot1dTpAgingTimeMin | 1.3.6.1.4.1.89.57.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The min timeout period in seconds for aging out dynamically learned forwarding information. | ||||
| Srldot1dTpAgingTimeMax | 1.3.6.1.4.1.89.57.7.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max timeout period in seconds for aging out dynamically learned forwarding information. | ||||
Textual conventions
VlanList1OCTET STRING (SIZE (0..128))Each octet within this value specifies a set of eight vlans, with the first octet specifying vlan 1 through 8, the second octet specifying vlan 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is included in the set of vlans; the vlan is not included if its bit has a value of '0'. VlanList1 represent vlans 1-1024
VlanList2OCTET STRING (SIZE (0..128))As VlanList1 but represent vlans 1025-2048
VlanList3OCTET STRING (SIZE (0..128))As VlanList1 but represent vlans 2049-3072
VlanList4OCTET STRING (SIZE (0..128))As VlanList1 but represent vlans 3073-4094