RADLAN-AAA
RNDThe private MIB module definition for Authentication, Authorization and Accounting in Radlan devices.
snmptranslate -m RADLAN-AAA -Tpsnmpwalk -v2c -c <community> -m RADLAN-AAA <host> 1.3.6.1.4.1.89.79Imports
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressType |
|---|---|
| RADLAN-MIB | rlAAAEap, rlRadius, rnd |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlAAA | 1.3.6.1.4.1.89.79 | |||
identity The private MIB module definition for Authentication, Authorization and Accounting in Radlan devices. | ||||
| SrlAAAMibVersion | 1.3.6.1.4.1.89.79.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 3. The difference in rlAAACreationDateSystemPasswordLevel15 and rlAAALocalUserEntry. | ||||
| SrlAAARetries | 1.3.6.1.4.1.89.79.2 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current Determines the number of retries for each method (Radius, local passwords, local users table and tacacs). | ||||
| SrlAAARadiusEnabled | 1.3.6.1.4.1.89.79.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use Radius. When to use Radius exactly depends on its position in the methods list. | ||||
| SrlAAATacacsEnabled | 1.3.6.1.4.1.89.79.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use Tacacs. When to use Tacacs exactly depends on its position in the methods list. | ||||
| SrlAAALocalUserEnabled | 1.3.6.1.4.1.89.79.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use the local users table. When to use the table exactly depends on its position in the methods list. | ||||
| SrlAAASystemPasswordEnabled | 1.3.6.1.4.1.89.79.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use the system password. When to use the passwords exactly depends on its position in the methods list. | ||||
| SrlAAALinePasswordEnabled | 1.3.6.1.4.1.89.79.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use the line password. When to use the passwords exactly depends on its position in the methods list. | ||||
| SrlAAAAlwaysSuccessEnabled | 1.3.6.1.4.1.89.79.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether AAA will use the always success method. When to use that method exactly depends on its position in the methods list. | ||||
| SrlAAARadiusSupported | 1.3.6.1.4.1.89.79.9 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether Radius is supported in AAA. If the value is false Radius will not be used as an authentication and accounting method. If the value is true Radius will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| SrlAAATacacsSupported | 1.3.6.1.4.1.89.79.10 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether Tacacs+ is supported in AAA. If the value is false Tacacs+ will not be used as an authentication and accounting method. If the value is true Tacacs+ will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| SrlAAALocalUserSupported | 1.3.6.1.4.1.89.79.11 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether the local users db is supported in AAA.If the value is false the local users db will not be used as an authentication and accounting method. If the value is true the local users db will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| SrlAAASystemPasswordSupported | 1.3.6.1.4.1.89.79.12 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether system password is supported in AAA. If the value is false system password will not be used as an authentication and accounting method. If the value is true the system password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| SrlAAALinePasswordSupported | 1.3.6.1.4.1.89.79.13 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether line password is supported in AAA. If the value is false line password will not be used as an authentication and accounting method. If the value is true the line password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| SrlAAALineAlwaysSuccessSupported | 1.3.6.1.4.1.89.79.14 | TruthValue | RO | |
scalar · TruthValue · read-only · current This mib show whether line always success method is supported in AAA.If the value is false always success method will not be used as an authentication and accounting method. If the value is true the always success method will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs). | ||||
| TrlAAAMethodListTable | 1.3.6.1.4.1.89.79.15 | NA | ||
table · not-accessible · current The table specifies all methods list per method name. | ||||
| RrlAAAMethodListEntry | 1.3.6.1.4.1.89.79.15.1 | NA | ||
| CrlAAAMethodListName | 1.3.6.1.4.1.89.79.15.1.1 | DisplayString (SIZE (3..20)) | RW | |
column · DisplayString (SIZE (3..20)) · read-write · current Line Method List Name | ||||
| CrlAAAMethodType1 | 1.3.6.1.4.1.89.79.15.1.2 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current first method type that will be used in the method linked list. | ||||
| CrlAAAMethodType2 | 1.3.6.1.4.1.89.79.15.1.3 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current second method type that will be used in the method linked list. | ||||
| CrlAAAMethodType3 | 1.3.6.1.4.1.89.79.15.1.4 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current 3th method type that will be used in the method linked list. | ||||
| CrlAAAMethodType4 | 1.3.6.1.4.1.89.79.15.1.5 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current 4th method type that will be used in the method linked list. | ||||
| CrlAAAMethodType5 | 1.3.6.1.4.1.89.79.15.1.6 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current 5th method type that will be used in the method linked list. | ||||
| CrlAAAMethodType6 | 1.3.6.1.4.1.89.79.15.1.7 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current 6th method type that will be used in the method linked list. | ||||
| CrlAAAMethodType7 | 1.3.6.1.4.1.89.79.15.1.8 | RlAAAMethodtype | RW | |
column · RlAAAMethodtype · read-write · current 7th method type that will be used in the method linked list. | ||||
| CrlAAAMethodListStatus | 1.3.6.1.4.1.89.79.15.1.9 | RowStatus | RW | |
column · RowStatus · read-write · current method list status can be destroy or createAndGo | ||||
| CrlAAAAuthorizeEnable | 1.3.6.1.4.1.89.79.15.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current flag that indicates whether authorizatoin is enabled | ||||
| TrlAAALineTable | 1.3.6.1.4.1.89.79.16 | NA | ||
table · not-accessible · current The table specifies all lines, their passwords and their authorizations level .the table ordered lexicography by the line name. when a new line is being authenticate the search in line table is from the first entry in table till it find the first entry that fit application input line parameters . | ||||
| RrlAAALineEntry | 1.3.6.1.4.1.89.79.16.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALinePortType | 1.3.6.1.4.1.89.79.16.1.1 | RlAAALinePortType | RW | |
column · RlAAALinePortType · read-write · current the physical port type . | ||||
| CrlAAAIfIndex | 1.3.6.1.4.1.89.79.16.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | ||||
| CrlAAAServiceType | 1.3.6.1.4.1.89.79.16.1.3 | RlAAAServiceType | RW | |
column · RlAAAServiceType · read-write · current the service type | ||||
| CrlAAALineMethodListNameLevel1 | 1.3.6.1.4.1.89.79.16.1.4 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 1 .That name points to the method list table .It is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel2 | 1.3.6.1.4.1.89.79.16.1.5 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 2 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel3 | 1.3.6.1.4.1.89.79.16.1.6 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 3 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line | ||||
| CrlAAALineMethodListNameLevel4 | 1.3.6.1.4.1.89.79.16.1.7 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 4-that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line | ||||
| CrlAAALineMethodListNameLevel5 | 1.3.6.1.4.1.89.79.16.1.8 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 5 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel6 | 1.3.6.1.4.1.89.79.16.1.9 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 6 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel7 | 1.3.6.1.4.1.89.79.16.1.10 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 7 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel8 | 1.3.6.1.4.1.89.79.16.1.11 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 8 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel9 | 1.3.6.1.4.1.89.79.16.1.12 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 9 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel10 | 1.3.6.1.4.1.89.79.16.1.13 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 10 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel11 | 1.3.6.1.4.1.89.79.16.1.14 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 11 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel12 | 1.3.6.1.4.1.89.79.16.1.15 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 12 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel13 | 1.3.6.1.4.1.89.79.16.1.16 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 13 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel14 | 1.3.6.1.4.1.89.79.16.1.17 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 14 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALineMethodListNameLevel15 | 1.3.6.1.4.1.89.79.16.1.18 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Method list Name for level 15 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line | ||||
| CrlAAALinePassword | 1.3.6.1.4.1.89.79.16.1.19 | DisplayString (SIZE (0..160)) | RW | |
column · DisplayString (SIZE (0..160)) · read-write · current Line Password. Zero length password is considered as no password. Password with zero length means that in case this password is the method to be used a method fail is returned and no other method is being used. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| CrlAAALineStatus | 1.3.6.1.4.1.89.79.16.1.20 | RowStatus | RW | |
column · RowStatus · read-write · current Line status can be destroy or createAndGo | ||||
| CrlAAALineLockedState | 1.3.6.1.4.1.89.79.16.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Line locked status
| ||||
| CrlAAALineConsFailedLogins | 1.3.6.1.4.1.89.79.16.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current Number of last consecutive failed logins | ||||
| CrlAAALinePasswordValidTime | 1.3.6.1.4.1.89.79.16.1.23 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | ||||
| CrlAAALinePasswordExpieryDate | 1.3.6.1.4.1.89.79.16.1.24 | DisplayString | RO | |
column · DisplayString · read-only · current If Line password aging is active, the date on which The current password will expire. Otherwise zero size string | ||||
| TrlAAALocalUserTable | 1.3.6.1.4.1.89.79.17 | NA | ||
table · not-accessible · current The table specifies all usernames, their passwords and their authorizations. | ||||
| RrlAAALocalUserEntry | 1.3.6.1.4.1.89.79.17.1 | NA | ||
| CrlAAALocalUserName | 1.3.6.1.4.1.89.79.17.1.1 | DisplayString (SIZE (1..20)) | RW | |
column · DisplayString (SIZE (1..20)) · read-write · current Local User Name | ||||
| CrlAAALocalUserPassword | 1.3.6.1.4.1.89.79.17.1.2 | DisplayString (SIZE (0..160)) | RW | |
column · DisplayString (SIZE (0..160)) · read-write · current Local User Password .The password can be null allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| CrlAAALocalUserPrivilage | 1.3.6.1.4.1.89.79.17.1.3 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current Local User Privilage | ||||
| CrlAAALocalHostStatus | 1.3.6.1.4.1.89.79.17.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current Local User status | ||||
| CrlAAALocalLockedState | 1.3.6.1.4.1.89.79.17.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Local User locked status
| ||||
| CrlAAALocalConsFailedLogins | 1.3.6.1.4.1.89.79.17.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of last consecutive failed logins | ||||
| CrlAAALocalPasswordValidTime | 1.3.6.1.4.1.89.79.17.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | ||||
| CrlAAALocalPasswordExpieryDate | 1.3.6.1.4.1.89.79.17.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current If User password aging is active, the date on which The current password will expire. Otherwise zero size string | ||||
| CrlAAALocalPasswordCreationDate | 1.3.6.1.4.1.89.79.17.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current The date on which the current password was created. Otherwise zero size string | ||||
| SrlAAASystemPasswordlevel1 | 1.3.6.1.4.1.89.79.18 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 1. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel2 | 1.3.6.1.4.1.89.79.19 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 2 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel3 | 1.3.6.1.4.1.89.79.20 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 3 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel4 | 1.3.6.1.4.1.89.79.21 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 4 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel5 | 1.3.6.1.4.1.89.79.22 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 5 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel6 | 1.3.6.1.4.1.89.79.23 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 6 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel7 | 1.3.6.1.4.1.89.79.24 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 7 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel8 | 1.3.6.1.4.1.89.79.25 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 8 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel9 | 1.3.6.1.4.1.89.79.26 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 9 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel10 | 1.3.6.1.4.1.89.79.27 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 10 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel11 | 1.3.6.1.4.1.89.79.28 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 11 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel12 | 1.3.6.1.4.1.89.79.29 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 12 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel13 | 1.3.6.1.4.1.89.79.30 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 13 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel14 | 1.3.6.1.4.1.89.79.31 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 14 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it | ||||
| SrlAAASystemPasswordlevel15 | 1.3.6.1.4.1.89.79.32 | DisplayString (SIZE (0..160)) | RW | |
scalar · DisplayString (SIZE (0..160)) · read-write · current system Password for level 15 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not part of it | ||||
| TrlAAAUserTable | 1.3.6.1.4.1.89.79.33 | NA | ||
table · not-accessible · current The table holds all current users that have been authenticated. | ||||
| RrlAAAUserEntry | 1.3.6.1.4.1.89.79.33.1 | NA | ||
| CrlAAAUserIndex | 1.3.6.1.4.1.89.79.33.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current User Index | ||||
| CrlAAAUserServiceType | 1.3.6.1.4.1.89.79.33.1.2 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service dont care is console terminal. | ||||
| CrlAAAUserRemoteIpAddress | 1.3.6.1.4.1.89.79.33.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current User remote IP address. | ||||
| CrlAAAUserName | 1.3.6.1.4.1.89.79.33.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current User Name | ||||
| CrlAAAUserLevel | 1.3.6.1.4.1.89.79.33.1.5 | Unsigned32 (1..15) | RO | |
column · Unsigned32 (1..15) · read-only · current User level | ||||
| CrlAAAUserIfIndex | 1.3.6.1.4.1.89.79.33.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current User if index. | ||||
| CrlAAAUserLoginDate | 1.3.6.1.4.1.89.79.33.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current Date of use creation. | ||||
| CrlAAAUserLoginDurationMS | 1.3.6.1.4.1.89.79.33.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Time in MS since user login. | ||||
| NrlAAATest | 1.3.6.1.4.1.89.79.34 | |||
| SrlAAATestPassword | 1.3.6.1.4.1.89.79.34.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable enables the user supplying the correct code to use the AAA test feature. | ||||
| TrlAAATestUserTable | 1.3.6.1.4.1.89.79.34.2 | NA | ||
table · not-accessible · current This table enables a user to perform a simulation of authentiction. | ||||
| RrlAAATestUserEntry | 1.3.6.1.4.1.89.79.34.2.1 | NA | ||
| CrlAAATestUserIndex | 1.3.6.1.4.1.89.79.34.2.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current User entry index (the number is used just to identify the user). | ||||
| CrlAAATestPortType | 1.3.6.1.4.1.89.79.34.2.1.2 | RlAAALinePortType | RW | |
column · RlAAALinePortType · read-write · current the physical port type . | ||||
| CrlAAATestIfIndex | 1.3.6.1.4.1.89.79.34.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current line ifIndex can configue to be zero witch means Don't-care value | ||||
| CrlAAATestServiceType | 1.3.6.1.4.1.89.79.34.2.1.4 | RlAAAServiceType | RW | |
column · RlAAAServiceType · read-write · current the service type | ||||
| CrlAAATestUserAuthenticationStatus | 1.3.6.1.4.1.89.79.34.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Shows the ststus of the operation and what is expected from the 'user'.
| ||||
| CrlAAATestUserAuthenticationAction | 1.3.6.1.4.1.89.79.34.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current By setting this field the process moves from one state to another. On creation the value must be begin. When the value of rlAAATestUserAuthenticationStatus is needPassword the value can be set to receivePassword or abort. When the value of rlAAATestUserAuthenticationStatus is needUsername the value can be set to receiveUsername or abort. When the value of rlAAATestUserAuthenticationStatus is success or failure the value can be set to delete or abort. When the value of rlAAATestUserAuthenticationStatus is aborted the value can be set to delete. When the value of rlAAATestUserAuthenticationStatus is deleted the value can not be set to any value. When the value of rlAAATestUserAuthenticationStatus is waiting the value can be set or abort.
| ||||
| CrlAAATestUserInput | 1.3.6.1.4.1.89.79.34.2.1.7 | DisplayString (SIZE (0..160)) | RW | |
column · DisplayString (SIZE (0..160)) · read-write · current If the acion was set to receivePassword than this field should hold the value of the password. If the action was set to receiveUsername than this field should hold the value of the username. | ||||
| CrlAAATestUserStatus | 1.3.6.1.4.1.89.79.34.2.1.8 | RowStatus | RW | |
column · RowStatus · read-write · current Entry status. The entry can not be deleted. It will be deleted if unchanged more than 2 minutes. | ||||
| NrlTacacs | 1.3.6.1.4.1.89.79.40 | |||
| SrlTacacsMibVersion | 1.3.6.1.4.1.89.79.40.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 1. | ||||
| SrlTacacsGlobalDefaultTimeout | 1.3.6.1.4.1.89.79.40.2 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current The maximum time (in seconds) to wait for TACACS+ server to reply. This MIB is used if the value of the field rlTacacsServerTimeout is 0. | ||||
| SrlTacacsGlobalDefaultKey | 1.3.6.1.4.1.89.79.40.3 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with TACACS+ server. This MIB is used if the value of the field rlTacacsServerUseGlobalDefaultKey is false. | ||||
| SrlTacacsGlobalDefaultSourceIpInterface | 1.3.6.1.4.1.89.79.40.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current IP address of the interface to use with TACACS+ server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerSource is 255.255.255.255. | ||||
| TrlTacacsServerTable | 1.3.6.1.4.1.89.79.40.7 | NA | ||
table · not-accessible · current The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret. | ||||
| RrlTacacsServerEntry | 1.3.6.1.4.1.89.79.40.7.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | ||||
| CrlTacacsServerAddress | 1.3.6.1.4.1.89.79.40.7.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the TACACS+ server referred to in this table entry. | ||||
| CrlTacacsServerPortNumber | 1.3.6.1.4.1.89.79.40.7.1.2 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The TCP port the client establishes connections with this server. | ||||
| CrlTacacsServerConnectionType | 1.3.6.1.4.1.89.79.40.7.1.3 | RlTacacsConnectionType | RW | |
column · RlTacacsConnectionType · read-write · current Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection). | ||||
| CrlTacacsServerConnectionStatus | 1.3.6.1.4.1.89.79.40.7.1.4 | RlTacacsConnectionStatus | RO | |
column · RlTacacsConnectionStatus · read-only · current Specifies status TCP connection type between device and TACACS+ server. | ||||
| CrlTacacsServerTimeout | 1.3.6.1.4.1.89.79.40.7.1.5 | INTEGER (0..30) | RW | |
column · INTEGER (0..30) · read-write · current The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used. | ||||
| CrlTacacsServerUseGlobalDefaultKey | 1.3.6.1.4.1.89.79.40.7.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used. | ||||
| CrlTacacsServerKey | 1.3.6.1.4.1.89.79.40.7.1.7 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with this TACACS+ server. | ||||
| CrlTacacsServerSourceIpInterface | 1.3.6.1.4.1.89.79.40.7.1.8 | IpAddress | RW | |
column · IpAddress · read-write · current IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlTacacsGlobalDefaultSourceIpInterface will be used. | ||||
| CrlTacacsServerPriority | 1.3.6.1.4.1.89.79.40.7.1.9 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | ||||
| CrlTacacsServerRowStatus | 1.3.6.1.4.1.89.79.40.7.1.10 | RowStatus | RW | |
| SrlTacacsGlobalDefaultSourceIPv6Interface | 1.3.6.1.4.1.89.79.40.8 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current IP address of the interface to use with TACACS+ server. A NULL for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerInetSourceInterface is 255.255.255.255. | ||||
| TrlTacacsServerInetTable | 1.3.6.1.4.1.89.79.40.9 | NA | ||
table · not-accessible · current The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret. | ||||
| RrlTacacsServerInetEntry | 1.3.6.1.4.1.89.79.40.9.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | ||||
| CrlTacacsServerInetAddressType | 1.3.6.1.4.1.89.79.40.9.1.1 | InetAddressType | RW | |
column · InetAddressType · read-write · current The Inet address type of TACACS+ server reffered to in this table entry .IPv6Z type is not supported. | ||||
| CrlTacacsServerInetAddress | 1.3.6.1.4.1.89.79.40.9.1.2 | InetAddress | RW | |
column · InetAddress · read-write · current The Inet Address address of the TACACS+ server referred to in this table entry. | ||||
| CrlTacacsServerInetPortNumber | 1.3.6.1.4.1.89.79.40.9.1.3 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The TCP port the client establishes connections with this server. | ||||
| CrlTacacsServerInetConnectionType | 1.3.6.1.4.1.89.79.40.9.1.4 | RlTacacsConnectionType | RW | |
column · RlTacacsConnectionType · read-write · current Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection). | ||||
| CrlTacacsServerInetConnectionStatus | 1.3.6.1.4.1.89.79.40.9.1.5 | RlTacacsConnectionStatus | RO | |
column · RlTacacsConnectionStatus · read-only · current Specifies status TCP connection type between device and TACACS+ server. | ||||
| CrlTacacsServerInetTimeout | 1.3.6.1.4.1.89.79.40.9.1.6 | INTEGER (0..30) | RW | |
column · INTEGER (0..30) · read-write · current The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used. | ||||
| CrlTacacsServerInetUseGlobalDefaultKey | 1.3.6.1.4.1.89.79.40.9.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used. | ||||
| CrlTacacsServerInetKey | 1.3.6.1.4.1.89.79.40.9.1.8 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with this TACACS+ server. | ||||
| CrlTacacsServerInetSourceInterfaceType | 1.3.6.1.4.1.89.79.40.9.1.9 | InetAddressType | RW | |
column · InetAddressType · read-write · current The Inet address type of the interface to use with this server. | ||||
| CrlTacacsServerInetSourceInterface | 1.3.6.1.4.1.89.79.40.9.1.10 | InetAddress | RW | |
column · InetAddress · read-write · current Inet address of the interface to use with this server. A value of NULL for this object disables source address specification for this server. A value of 255.255.255.255 maens that the global default rlTacacsGlobalDefaultSourceIpInterface or rlTacacsGlobalDefaultSourceIPv6Interface values are used. | ||||
| CrlTacacsServerInetPriority | 1.3.6.1.4.1.89.79.40.9.1.11 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | ||||
| CrlTacacsServerInetRowStatus | 1.3.6.1.4.1.89.79.40.9.1.12 | RowStatus | RW | |
| SrlAAAAuditingEnable | 1.3.6.1.4.1.89.79.41 | TruthValue | RW | |
scalar · TruthValue · read-write · current Controls whether SysLog messages should be issued on login events | ||||
| SrlAAAMinPasswordLength | 1.3.6.1.4.1.89.79.42 | INTEGER (0..64) | RW | |
scalar · INTEGER (0..64) · read-write · current The minimum length of password for local user authentication defined in field rlAAALocalUserPassword in rlAAALocalUserTable. The value applies only to new or updated user passwords. In actual implementation the range may be reduced to (0 | N-64), where N is a platform dependent (for TIC compatibility N=8) | ||||
| SrlAAAPasswordHistSize | 1.3.6.1.4.1.89.79.43 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The number of most recent password, previously defined for Local User Table, Line Table, System Password Table for specific entity. This list used for password reusing prevention. Value of 0 means none. Changing the value does not cause the loss of history. History Max size is product specific. | ||||
| SrlAAAPasswordHistHoldTime | 1.3.6.1.4.1.89.79.44 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The time in day, which an old password
may be used in password history check.
Changing the value does not cause the
loss of history. | ||||
| SrlAAASuccLoginWriteToFile | 1.3.6.1.4.1.89.79.45 | TruthValue | RW | |
scalar · TruthValue · read-write · current Controls whether successful logins are written to login file | ||||
| TrlAAALocalLoginHistTable | 1.3.6.1.4.1.89.79.46 | NA | ||
table · not-accessible · current The table holds successful login history for all users. This table is read-only. | ||||
| RrlAAALocalLoginHistEntry | 1.3.6.1.4.1.89.79.46.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALocalLoginHistName | 1.3.6.1.4.1.89.79.46.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current User Name | ||||
| CrlAAALocalLoginHistIndex | 1.3.6.1.4.1.89.79.46.1.2 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in History for specific user. Lower number means more recent login. | ||||
| CrlAAALocalLoginHistServiceType | 1.3.6.1.4.1.89.79.46.1.3 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAALocalLoginHistRemoteIpAddress | 1.3.6.1.4.1.89.79.46.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current User remote IP address. | ||||
| CrlAAALocalLoginHistLocalIpAddress | 1.3.6.1.4.1.89.79.46.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current local Ip Address on login. | ||||
| CrlAAALocalLoginDateTime | 1.3.6.1.4.1.89.79.46.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAALocalLoginMrid | 1.3.6.1.4.1.89.79.46.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| TrlAAALinePassLoginHistTable | 1.3.6.1.4.1.89.79.47 | NA | ||
table · not-accessible · current The table holds successful login history for Line passwords. This table is read-only. | ||||
| RrlAAALinePassLoginHistEntry | 1.3.6.1.4.1.89.79.47.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALinePassLoginHistPortType | 1.3.6.1.4.1.89.79.47.1.1 | RlAAALinePortType | RW | |
column · RlAAALinePortType · read-write · current the physical port type. | ||||
| CrlAAALinePassLoginHistIfIndex | 1.3.6.1.4.1.89.79.47.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | ||||
| CrlAAALinePassLoginHistServiceType | 1.3.6.1.4.1.89.79.47.1.3 | RlAAAServiceType | RW | |
column · RlAAAServiceType · read-write · current the service type | ||||
| CrlAAALinePassLoginHistIndex | 1.3.6.1.4.1.89.79.47.1.4 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in History for specific user. Lower number means more recent login. | ||||
| CrlAAALinePassLoginHistActServiceType | 1.3.6.1.4.1.89.79.47.1.5 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAALinePassLoginHistRemoteIpAddress | 1.3.6.1.4.1.89.79.47.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current User remote IP address. | ||||
| CrlAAALinePassLoginHistLocalIpAddress | 1.3.6.1.4.1.89.79.47.1.7 | IpAddress | RO | |
column · IpAddress · read-only · current local Ip Address on login. | ||||
| CrlAAALinePassLoginDateTime | 1.3.6.1.4.1.89.79.47.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAALinePassLoginMrid | 1.3.6.1.4.1.89.79.47.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| TrlAAASystemLoginHistTable | 1.3.6.1.4.1.89.79.48 | NA | ||
table · not-accessible · current The table holds successful login history for system passwords. This table is read-only. | ||||
| RrlAAASystemLoginHistEntry | 1.3.6.1.4.1.89.79.48.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAASystemLoginHistLevel | 1.3.6.1.4.1.89.79.48.1.1 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current User Name | ||||
| CrlAAASystemLoginHistIndex | 1.3.6.1.4.1.89.79.48.1.2 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in History for specific user. Lower number means more recent login. | ||||
| CrlAAASystemLoginHistServiceType | 1.3.6.1.4.1.89.79.48.1.3 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAASystemLoginHistRemoteIpAddress | 1.3.6.1.4.1.89.79.48.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current User remote IP address. | ||||
| CrlAAASystemLoginHistLocalIpAddress | 1.3.6.1.4.1.89.79.48.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current local Ip Address on login. | ||||
| CrlAAASystemLoginDateTime | 1.3.6.1.4.1.89.79.48.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAASystemLoginMrid | 1.3.6.1.4.1.89.79.48.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| TrlAAASysPassStatTable | 1.3.6.1.4.1.89.79.49 | NA | ||
table · not-accessible · current The table specifies all system password and their security properties: is password locked due to wrong password, when and how it was locked or last unsuccessful login information, expiry date of the password. | ||||
| RrlAAASysPassStatEntry | 1.3.6.1.4.1.89.79.49.1 | NA | ||
| CrlAAASysPassStatLevel | 1.3.6.1.4.1.89.79.49.1.1 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current System password level | ||||
| CrlAAASysPassStatLockedState | 1.3.6.1.4.1.89.79.49.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current System password locked status
| ||||
| CrlAAASysPassStatConsFailedLogins | 1.3.6.1.4.1.89.79.49.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of last consecutive failed logins | ||||
| CrlAAASysPassStatPasswordValidTime | 1.3.6.1.4.1.89.79.49.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password. | ||||
| CrlAAASysPassStatPasswordExpieryDate | 1.3.6.1.4.1.89.79.49.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current If System password aging is active, the date, on which the current password will expire. Otherwise zero size string | ||||
| SrlAAAMaxNumLogAttmpts | 1.3.6.1.4.1.89.79.50 | INTEGER | RW | |
scalar · INTEGER · read-write · current The number of consecutive unsuccessful login attempts before user is locked. Value of 0 means no limit. The actual range is product specific. TIC requirement is 3. | ||||
| SrlAAAUnlockUserName | 1.3.6.1.4.1.89.79.51 | DisplayString (SIZE (0..20)) | RW | |
scalar · DisplayString (SIZE (0..20)) · read-write · current An action MIB variable setting with value of Local User Name will unlock this user. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero length display string. | ||||
| SrlAAAUnlockSystemPassword | 1.3.6.1.4.1.89.79.52 | INTEGER (0..15) | RW | |
scalar · INTEGER (0..15) · read-write · current An action MIB variable setting with value of Level will unlock the system password for this level. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero. Zero (0) does no action. | ||||
| TrlAAALockedLineTable | 1.3.6.1.4.1.89.79.53 | NA | ||
table · not-accessible · current The table specifies lines statuses. Users cannot access the product from remote based on a password of the locked line. This table enables to unlock lines. | ||||
| RrlAAALockedLineEntry | 1.3.6.1.4.1.89.79.53.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALockedLinePortType | 1.3.6.1.4.1.89.79.53.1.1 | RlAAALinePortType | RW | |
column · RlAAALinePortType · read-write · current the physical port type . | ||||
| CrlAAALockedLineIfIndex | 1.3.6.1.4.1.89.79.53.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | ||||
| CrlAAALockedLineServiceType | 1.3.6.1.4.1.89.79.53.1.3 | RlAAAServiceType | RW | |
column · RlAAAServiceType · read-write · current the service type | ||||
| CrlAAALockedLineStatus | 1.3.6.1.4.1.89.79.53.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The entry exists only if a line exist. Setting this field to value usable results in resetting the password failure counter, and unlock a locked user.
| ||||
| TrlAAASystemPasswordVerificationAndSettingTable | 1.3.6.1.4.1.89.79.54 | NA | ||
table · not-accessible · current The table specifies per every system level, old and new passwords. Serves for verification the old password and setting a new password. | ||||
| RrlAAASystemPasswordVerificationAndSettingEntry | 1.3.6.1.4.1.89.79.54.1 | NA | ||
row · not-accessible · current The row of system password verification and setting table. | ||||
| CrlAAASystemPasswordSettingPrivilegeLevel | 1.3.6.1.4.1.89.79.54.1.1 | INTEGER (1..15) | NA | |
column · INTEGER (1..15) · not-accessible · current System password Privelege Level to be set. | ||||
| CrlAAASystemPasswordVerificationOldPassword | 1.3.6.1.4.1.89.79.54.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Old system password to be verified. | ||||
| CrlAAASystemPasswordSettingNewPassword | 1.3.6.1.4.1.89.79.54.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current New system password to be set. | ||||
| CrlAAASystemPasswordConfirmNewPassword | 1.3.6.1.4.1.89.79.54.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current New system password to be confirmed. | ||||
| SrlAAAAccountingMngMethod | 1.3.6.1.4.1.89.79.55 | RlAAAAccountingMethod | RW | |
scalar · RlAAAAccountingMethod · read-write · current Method, used for accounting of management sessions, none denotes Accounting is disabled. | ||||
| SrlAAAAccountingDot1xMethod | 1.3.6.1.4.1.89.79.56 | RlAAAAccountingMethod | RW | |
scalar · RlAAAAccountingMethod · read-write · current Method, used for accounting of 802.1x sessions, none denotes Accounting is disabled. | ||||
| TrlAAAUserInetTable | 1.3.6.1.4.1.89.79.57 | NA | ||
table · not-accessible · current The table holds all current users that have been authenticated. it coexist with rlAAAUserTable to support IPv4 and IPv6 | ||||
| RrlAAAUserInetEntry | 1.3.6.1.4.1.89.79.57.1 | NA | ||
| CrlAAAUserInetIndex | 1.3.6.1.4.1.89.79.57.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current User Index | ||||
| CrlAAAUserInetServiceType | 1.3.6.1.4.1.89.79.57.1.2 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service dont care is console terminal. | ||||
| CrlAAAUserInetRemoteIpAddressType | 1.3.6.1.4.1.89.79.57.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current User remote INET address Type. | ||||
| CrlAAAUserInetRemoteIpAddress | 1.3.6.1.4.1.89.79.57.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current User remote INET address. | ||||
| CrlAAAUserInetName | 1.3.6.1.4.1.89.79.57.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current User Name | ||||
| CrlAAAUserInetLevel | 1.3.6.1.4.1.89.79.57.1.6 | Unsigned32 (1..15) | RO | |
column · Unsigned32 (1..15) · read-only · current User level | ||||
| CrlAAAUserInetIfIndex | 1.3.6.1.4.1.89.79.57.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current User if index. | ||||
| CrlAAAUserInetLoginDate | 1.3.6.1.4.1.89.79.57.1.8 | DateAndTime | RO | |
column · DateAndTime · read-only · current Date of use creation. | ||||
| CrlAAAUserInetLoginDurationMS | 1.3.6.1.4.1.89.79.57.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Time in MS since user login. | ||||
| TrlAAALocalLoginHistInetTable | 1.3.6.1.4.1.89.79.58 | NA | ||
table · not-accessible · current The table holds successful login history for all users. This table is read-only. it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6 | ||||
| RrlAAALocalLoginHistInetEntry | 1.3.6.1.4.1.89.79.58.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALocalLoginHistInetName | 1.3.6.1.4.1.89.79.58.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current User Name | ||||
| CrlAAALocalLoginHistInetIndex | 1.3.6.1.4.1.89.79.58.1.2 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in History for specific user. Lower number means more recent login. | ||||
| CrlAAALocalLoginHistInetServiceType | 1.3.6.1.4.1.89.79.58.1.3 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAALocalLoginHistInetRemoteIpAddressType | 1.3.6.1.4.1.89.79.58.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current User remote IP address Type. | ||||
| CrlAAALocalLoginHistInetRemoteIpAddress | 1.3.6.1.4.1.89.79.58.1.5 | InetAddress | RO | |
column · InetAddress · read-only · current User remote IP address. | ||||
| CrlAAALocalLoginHistInetLocalIpAddressType | 1.3.6.1.4.1.89.79.58.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current local Ip Address Type on login. | ||||
| CrlAAALocalLoginHistInetLocalIpAddress | 1.3.6.1.4.1.89.79.58.1.7 | InetAddress | RO | |
column · InetAddress · read-only · current local Ip Address on login. | ||||
| CrlAAALocalLoginHistInetDateTime | 1.3.6.1.4.1.89.79.58.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAALocalLoginHistInetMrid | 1.3.6.1.4.1.89.79.58.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| TrlAAALinePassLoginHistInetTable | 1.3.6.1.4.1.89.79.59 | NA | ||
table · not-accessible · current The table holds successful login history for Line passwords. This table is read-only. it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6 | ||||
| RrlAAALinePassLoginHistInetEntry | 1.3.6.1.4.1.89.79.59.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAALinePassLoginHistInetPortType | 1.3.6.1.4.1.89.79.59.1.1 | RlAAALinePortType | RW | |
column · RlAAALinePortType · read-write · current the physical port type. | ||||
| CrlAAALinePassLoginHistInetIfIndex | 1.3.6.1.4.1.89.79.59.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0. | ||||
| CrlAAALinePassLoginHistInetServiceType | 1.3.6.1.4.1.89.79.59.1.3 | RlAAAServiceType | RW | |
column · RlAAAServiceType · read-write · current the service type | ||||
| CrlAAALinePassLoginHistInetIndex | 1.3.6.1.4.1.89.79.59.1.4 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in HistInetory for specific user. Lower number means more recent login. | ||||
| CrlAAALinePassLoginHistInetActServiceType | 1.3.6.1.4.1.89.79.59.1.5 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAALinePassLoginHistInetRemoteInetAddressType | 1.3.6.1.4.1.89.79.59.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current User remote IP address Type. | ||||
| CrlAAALinePassLoginHistInetRemoteInetAddress | 1.3.6.1.4.1.89.79.59.1.7 | InetAddress | RO | |
column · InetAddress · read-only · current User remote IP address. | ||||
| CrlAAALinePassLoginHistInetLocalInetAddressType | 1.3.6.1.4.1.89.79.59.1.8 | InetAddressType | RO | |
column · InetAddressType · read-only · current local Ip Address Type on login. | ||||
| CrlAAALinePassLoginHistInetLocalInetAddress | 1.3.6.1.4.1.89.79.59.1.9 | InetAddress | RO | |
column · InetAddress · read-only · current local Ip Address on login. | ||||
| CrlAAALinePassLoginHistInetDateTime | 1.3.6.1.4.1.89.79.59.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAALinePassLoginHistInetMrid | 1.3.6.1.4.1.89.79.59.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| TrlAAASystemLoginHistInetTable | 1.3.6.1.4.1.89.79.60 | NA | ||
table · not-accessible · current The table holds successful login history for system passwords. This table is read-only. it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6 | ||||
| RrlAAASystemLoginHistInetEntry | 1.3.6.1.4.1.89.79.60.1 | NA | ||
row · not-accessible · current The row definition for this table. | ||||
| CrlAAASystemLoginHistInetLevel | 1.3.6.1.4.1.89.79.60.1.1 | INTEGER (1..15) | RO | |
column · INTEGER (1..15) · read-only · current User Name | ||||
| CrlAAASystemLoginHistInetIndex | 1.3.6.1.4.1.89.79.60.1.2 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current Index in History for specific user. Lower number means more recent login. | ||||
| CrlAAASystemLoginHistInetServiceType | 1.3.6.1.4.1.89.79.60.1.3 | RlAAAServiceType | RO | |
column · RlAAAServiceType · read-only · current The service that the user uses. Service don't care is console terminal. | ||||
| CrlAAASystemLoginHistInetRemoteInetAddressType | 1.3.6.1.4.1.89.79.60.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current User remote IP address Type. | ||||
| CrlAAASystemLoginHistInetRemoteInetAddress | 1.3.6.1.4.1.89.79.60.1.5 | InetAddress | RO | |
column · InetAddress · read-only · current User remote IP address. | ||||
| CrlAAASystemLoginHistInetLocalInetAddressType | 1.3.6.1.4.1.89.79.60.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current local Ip Address Type on login. | ||||
| CrlAAASystemLoginHistInetLocalInetAddress | 1.3.6.1.4.1.89.79.60.1.7 | InetAddress | RO | |
column · InetAddress · read-only · current local Ip Address on login. | ||||
| CrlAAASystemLoginHistInetDateTime | 1.3.6.1.4.1.89.79.60.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS | ||||
| CrlAAASystemLoginHistInetMrid | 1.3.6.1.4.1.89.79.60.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Mrid - indicates to which instance the connection was established | ||||
| SrlAAAPasswordComplexityEnabled | 1.3.6.1.4.1.89.79.61 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether password complexity rules must be applied. | ||||
| SrlAAAPasswordComplexityMinCharClasses | 1.3.6.1.4.1.89.79.62 | INTEGER (0..4) | RW | |
scalar · INTEGER (0..4) · read-write · current Indicates minimal number of character classes from which the password should contain characters if password complexity enabled. charater classes are : lower case, upper case, digits, special characters. | ||||
| SrlAAAPasswordComplexityNotOldPasswordEnabled | 1.3.6.1.4.1.89.79.63 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether new password can be as same as old password if password complexity enabled. | ||||
| SrlAAAPasswordComplexityCharRepeat | 1.3.6.1.4.1.89.79.64 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates that no character in new password can't be repeated more than 3 times if password complexity enabled. | ||||
| SrlAAAPasswordComplexityNotUserNameEnabled | 1.3.6.1.4.1.89.79.65 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether new password can be as same as user name if password complexity enabled. | ||||
| SrlAAAPasswordComplexityNotManufacturerEnabled | 1.3.6.1.4.1.89.79.66 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies whether new password can be as same as manufacturer name if password complexity enabled. | ||||
| SrlAAAPasswordGlobalAgingTime | 1.3.6.1.4.1.89.79.67 | INTEGER (0..365) | RW | |
scalar · INTEGER (0..365) · read-write · current Determines whether password aging should be applied.
Tic doesn't have to be enabled.
If == 0 then aging is disabled.
Note: Actual aging will not be enabled if system
doesn't have real time clock until, clock is
set either by user or SNTP. | ||||
| TrlAAALocalUserPasswordVerificationAndSettingTable | 1.3.6.1.4.1.89.79.68 | NA | ||
table · not-accessible · current The table specifies per every local user, old and new passwords. Serves for verification the old password and setting a new password. | ||||
| RrlAAALocalUserPasswordVerificationAndSettingEntry | 1.3.6.1.4.1.89.79.68.1 | NA | ||
row · not-accessible · current The row of local user password verification and setting table. | ||||
| CrlAAALocalUserNameString | 1.3.6.1.4.1.89.79.68.1.1 | DisplayString (SIZE (1..20)) | RW | |
column · DisplayString (SIZE (1..20)) · read-write · current Local user name. | ||||
| CrlAAALocalUserVerificationOldPassword | 1.3.6.1.4.1.89.79.68.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current Local user old password to be verified. | ||||
| CrlAAALocalUserSettingNewPassword | 1.3.6.1.4.1.89.79.68.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current Local user new password to be set. | ||||
| CrlAAALocalUserConfirmNewPassword | 1.3.6.1.4.1.89.79.68.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Local user new password for confirmation. | ||||
| SrlAAACreationDateSystemPasswordLevel15 | 1.3.6.1.4.1.89.79.69 | DisplayString | RO | |
scalar · DisplayString · read-only · current The date on which the system Password for level 15 was created. Otherwise zero size string | ||||
| SrlAAAPasswordRecoveryDisable | 1.3.6.1.4.1.89.79.70 | TruthValue | RW | |
scalar · TruthValue · read-write · current if this MIB is set to TRUE then when user will use 'password Recovery' to the device , the configuration will automatically be erased. | ||||
| SrlRadiusMibVersion | 1.3.6.1.4.1.89.80.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 2. 1 - original version. 2 - field rlRadiusServerUsage was added to rlRadiusServerEntry | ||||
| SrlRadiusGlobalDefaultTimeout | 1.3.6.1.4.1.89.80.2 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current The maximum time (in seconds) to wait for this RADIUS server to reply. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultTimeout is false. | ||||
| SrlRadiusGlobalDefaultRetries | 1.3.6.1.4.1.89.80.3 | INTEGER (1..15) | RW | |
scalar · INTEGER (1..15) · read-write · current The number of times to try contacting this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultRetries is false. | ||||
| SrlRadiusGlobalDefaultDeadtime | 1.3.6.1.4.1.89.80.4 | INTEGER (0..2000) | RW | |
scalar · INTEGER (0..2000) · read-write · current Number of minutes that any RADIUS server is ignored after it has failed. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultDeadtime is false. | ||||
| SrlRadiusGlobalDefaultKey | 1.3.6.1.4.1.89.80.5 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultKey is false. | ||||
| SrlRadiusGlobalDefaultSource | 1.3.6.1.4.1.89.80.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current IPv4 address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultSource is false. | ||||
| TrlRadiusServerTable | 1.3.6.1.4.1.89.80.7 | NA | ||
table · not-accessible · current The (conceptual) table listing the RADIUS servers with which the cliient shares a secret. | ||||
| RrlRadiusServerEntry | 1.3.6.1.4.1.89.80.7.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a RADIUS server with which the client shares a secret. | ||||
| CrlRadiusServerAddress | 1.3.6.1.4.1.89.80.7.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the RADIUS server referred to in this table entry. | ||||
| CrlRadiusServerAuthPortNumber | 1.3.6.1.4.1.89.80.7.1.2 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The UDP port the client is using to send authentication requests to this server. | ||||
| CrlRadiusServerAcctPortNumber | 1.3.6.1.4.1.89.80.7.1.3 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The UDP port the client is using to send accounting requests to this server. | ||||
| CrlRadiusServerTimeout | 1.3.6.1.4.1.89.80.7.1.4 | INTEGER (0..30) | RW | |
column · INTEGER (0..30) · read-write · current The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout. | ||||
| CrlRadiusServerRetries | 1.3.6.1.4.1.89.80.7.1.5 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries. | ||||
| CrlRadiusServerDeadtime | 1.3.6.1.4.1.89.80.7.1.6 | INTEGER (0..2001) | RW | |
column · INTEGER (0..2001) · read-write · current Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used. | ||||
| CrlRadiusServerUseGlobalDefaultKey | 1.3.6.1.4.1.89.80.7.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used. | ||||
| CrlRadiusServerKey | 1.3.6.1.4.1.89.80.7.1.8 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with this RADIUS server. | ||||
| CrlRadiusServerSource | 1.3.6.1.4.1.89.80.7.1.9 | IpAddress | RW | |
column · IpAddress · read-write · current IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used. | ||||
| CrlRadiusServerPriority | 1.3.6.1.4.1.89.80.7.1.10 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | ||||
| CrlRadiusServerStatus | 1.3.6.1.4.1.89.80.7.1.11 | RowStatus | RW | |
| CrlRadiusServerUsage | 1.3.6.1.4.1.89.80.7.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Determines actions for which the radius server will be used.
| ||||
| TrlRadiusServerInetTable | 1.3.6.1.4.1.89.80.8 | NA | ||
table · not-accessible · current The (conceptual) table listing the RADIUS servers with which the cliient shares a secret. | ||||
| RrlRadiusServerInetEntry | 1.3.6.1.4.1.89.80.8.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing a RADIUS server with which the client shares a secret. | ||||
| CrlRadiusServerInetAddressType | 1.3.6.1.4.1.89.80.8.1.1 | InetAddressType | RW | |
column · InetAddressType · read-write · current The Inet address type of RADIUS server reffered to in this table entry .IPv6Z type is not supported. | ||||
| CrlRadiusServerInetAddress | 1.3.6.1.4.1.89.80.8.1.2 | InetAddress | RW | |
column · InetAddress · read-write · current The Inet address of the RADIUS server referred to in this table entry.Only one instance of specified address can be added at the same time. | ||||
| CrlRadiusServerInetAuthPortNumber | 1.3.6.1.4.1.89.80.8.1.3 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The UDP port the client is using to send authentication requests to this server.The zero value can be used only if rlRadiusServerInetAcctPortNumber value is not zero. | ||||
| CrlRadiusServerInetAcctPortNumber | 1.3.6.1.4.1.89.80.8.1.4 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The UDP port the client is using to send accounting requests to this server.The zero value can be used only if rlRadiusServerInetAuthPortNumber value is not zero. | ||||
| CrlRadiusServerInetTimeout | 1.3.6.1.4.1.89.80.8.1.5 | INTEGER (0..30) | RW | |
column · INTEGER (0..30) · read-write · current The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout. | ||||
| CrlRadiusServerInetRetries | 1.3.6.1.4.1.89.80.8.1.6 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries. | ||||
| CrlRadiusServerInetDeadtime | 1.3.6.1.4.1.89.80.8.1.7 | INTEGER (0..2001) | RW | |
column · INTEGER (0..2001) · read-write · current Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used. | ||||
| CrlRadiusServerInetUseGlobalDefaultKey | 1.3.6.1.4.1.89.80.8.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used. | ||||
| CrlRadiusServerInetKey | 1.3.6.1.4.1.89.80.8.1.9 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Secret key to be shared with this RADIUS server. | ||||
| CrlRadiusServerInetSourceType | 1.3.6.1.4.1.89.80.8.1.10 | InetAddressType | RW | |
column · InetAddressType · read-write · current The rlRadiusServerInetSource address type. IPv6Z type not supported | ||||
| CrlRadiusServerInetSource | 1.3.6.1.4.1.89.80.8.1.11 | InetAddress | RW | |
column · InetAddress · read-write · current Inet address of the interface to use with this server. To provide backward compatibility the value of 0.0.0.0 for this object will be used to disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used for Ipv4 servers and rlRadiusIPv6GlobalDefaultSource will be used for Ipv6 servers.IPv6Z type not supported. Only valid IP address will be used. Application will set default value. | ||||
| CrlRadiusServerInetPriority | 1.3.6.1.4.1.89.80.8.1.12 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table). | ||||
| CrlRadiusServerInetStatus | 1.3.6.1.4.1.89.80.8.1.13 | RowStatus | RW | |
| CrlRadiusServerInetUsage | 1.3.6.1.4.1.89.80.8.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Determines actions for which the radius server will be used. WirelessAuthentication will be used if wireless is supported.
| ||||
| CrlRadiusServerInetLastResponseTime | 1.3.6.1.4.1.89.80.8.1.15 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime at the time this server has response. If there is no request to the server, this object contains a zero value. | ||||
| SrlRadiusGlobalIPv6DefaultSource | 1.3.6.1.4.1.89.80.9 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current IPv6 address of the interface to use with this server. A NULL value for this object disables source address specification. | ||||
| TrlAAAEapMethodListTable | 1.3.6.1.4.1.89.97.1 | NA | ||
table · not-accessible · current The table specifies all methods list per method name. | ||||
| RrlAAAEapMethodListEntry | 1.3.6.1.4.1.89.97.1.1 | NA | ||
| CrlAAAEapMethodListName | 1.3.6.1.4.1.89.97.1.1.1 | DisplayString (SIZE (3..20)) | RW | |
column · DisplayString (SIZE (3..20)) · read-write · current Line Method List Name | ||||
| CrlAAAEapMethodType1 | 1.3.6.1.4.1.89.97.1.1.2 | RlAAAEapMethodtype | RW | |
column · RlAAAEapMethodtype · read-write · current first method type that will be used in the method linked list. | ||||
| CrlAAAEapMethodType2 | 1.3.6.1.4.1.89.97.1.1.3 | RlAAAEapMethodtype | RW | |
column · RlAAAEapMethodtype · read-write · current second method type that will be used in the method linked list. | ||||
| CrlAAAEapMethodType3 | 1.3.6.1.4.1.89.97.1.1.4 | RlAAAEapMethodtype | RW | |
column · RlAAAEapMethodtype · read-write · current 3th method type that will be used in the method linked list. | ||||
| CrlAAAEapMethodType4 | 1.3.6.1.4.1.89.97.1.1.5 | RlAAAEapMethodtype | RW | |
column · RlAAAEapMethodtype · read-write · current 4th method type that will be used in the method linked list. | ||||
| CrlAAAEapMethodType5 | 1.3.6.1.4.1.89.97.1.1.6 | RlAAAEapMethodtype | RW | |
column · RlAAAEapMethodtype · read-write · current 5th method type that will be used in the method linked list. | ||||
| CrlAAAEapMethodListStatus | 1.3.6.1.4.1.89.97.1.1.7 | RowStatus | RW | |
column · RowStatus · read-write · current method list status can be destroy or createAndGo | ||||
| SrlAAAEapCurrentMethodList | 1.3.6.1.4.1.89.97.2 | DisplayString (SIZE (3..20)) | RW | |
scalar · DisplayString (SIZE (3..20)) · read-write · current Specifies the method list that will be used for authentication. | ||||
Textual conventions
RlAAAAccountingMethodINTEGERnone(1)radius(2)tacacs(3)Protocols, used for accounting.
RlAAAEapMethodtypeINTEGERrlAAAEapMethodDeny(0)rlAAAEapMethodRadius(1)rlAAAEapMethodSucceed(2)Method list type.
RlAAALinePortTypeINTEGERrlAAAPortConsole(2)rlAAAPortDontCare(0)rlAAAPortNetwork(1)Line physical port type,the rlAAAPortDontCare must be the maximum value in the enum.
RlAAAMethodtypeINTEGERrlAAAMethodDeny(0)rlAAAMethodLinePassword(1)rlAAAMethodLocalUserTable(3)rlAAAMethodRadius(4)rlAAAMethodSucceed(6)rlAAAMethodSystemPassword(2)rlAAAMethodTacacs(5)Method list type.
RlAAAServiceTypeINTEGERrlAAAServiceTypeDontCare(0)rlAAAServiceTypeHttp(2)rlAAAServiceTypeHttps(4)rlAAAServiceTypeSnmp(5)rlAAAServiceTypeSsh(3)rlAAAServiceTypeSshPubkey(6)rlAAAServiceTypeTelnet(1)Line service type.rlAAAServiceTypeDontCare must be the maximum value in the enum.
RlTacacsConnectionStatusINTEGERrlTacacsConnected(0)rlTacacsNotConnected(1)Specifies the status of TCP connection between device and TACACS+ server.
RlTacacsConnectionTypeINTEGERrlTacacsPerSessionConnection(1)rlTacacsSingleConnection(0)Specifies TCP connection type between device and TACACS+ server