NETGEAR-ROUTING-MIB
Broadcom LimitedThe Netgear Private MIB for FastPath Routing
snmptranslate -m NETGEAR-ROUTING-MIB -Tpsnmpwalk -v2c -c <community> -m NETGEAR-ROUTING-MIB <host> 1.3.6.1.4.1.4413.1.1.2Imports
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
|---|---|
| OSPF-MIB | RouterID, ospfAreaEntry, ospfIfEntry, ospfVirtIfEntry |
| QUANTA-LB6M-REF-MIB | lb6m |
| RIPv2-MIB | rip2IfConfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| VRRP-MIB | vrrpOperVrId |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfastPathRouting | 1.3.6.1.4.1.4413.1.1.2 | |||
identity The Netgear Private MIB for FastPath Routing | ||||
| NagentSwitchArpGroup | 1.3.6.1.4.1.4413.1.1.2.1 | |||
| SagentSwitchArpAgeoutTime | 1.3.6.1.4.1.4413.1.1.2.1.1 | Integer32 (15..21600) | RW | |
scalar · Integer32 (15..21600) · read-write · current Configures the ARP entry ageout time in seconds. Allowable range: 15-21600 | ||||
| SagentSwitchArpResponseTime | 1.3.6.1.4.1.4413.1.1.2.1.2 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current Configures the ARP request response timeout in seconds. Allowable range: 1-10 | ||||
| SagentSwitchArpMaxRetries | 1.3.6.1.4.1.4413.1.1.2.1.3 | Integer32 (0..10) | RW | |
scalar · Integer32 (0..10) · read-write · current Configures the ARP count of maximum request for retries. Allowable range: 0-10 | ||||
| SagentSwitchArpCacheSize | 1.3.6.1.4.1.4413.1.1.2.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific. | ||||
| SagentSwitchArpDynamicRenew | 1.3.6.1.4.1.4413.1.1.2.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This indicates the current setting of ARP dynamic renew mode.
| ||||
| SagentSwitchArpTotalEntryCountCurrent | 1.3.6.1.4.1.4413.1.1.2.1.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current number of entries in the ARP cache. | ||||
| SagentSwitchArpTotalEntryCountPeak | 1.3.6.1.4.1.4413.1.1.2.1.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. | ||||
| SagentSwitchArpStaticEntryCountCurrent | 1.3.6.1.4.1.4413.1.1.2.1.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Current number of configured static ARP entries. | ||||
| SagentSwitchArpStaticEntryCountMax | 1.3.6.1.4.1.4413.1.1.2.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current Maximum number of configurable static ARP entries. | ||||
| TagentSwitchArpTable | 1.3.6.1.4.1.4413.1.1.2.1.10 | NA | obsolete | |
table · not-accessible · obsolete This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. | ||||
| RagentSwitchArpEntry | 1.3.6.1.4.1.4413.1.1.2.1.10.1 | NA | obsolete | |
row · not-accessible · obsolete | ||||
| CagentSwitchArpAge | 1.3.6.1.4.1.4413.1.1.2.1.10.1.1 | TimeTicks | RO | obsolete |
column · TimeTicks · read-only · obsolete This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging. | ||||
| CagentSwitchArpIpAddress | 1.3.6.1.4.1.4413.1.1.2.1.10.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete The IP Address assigned to each interface. | ||||
| CagentSwitchArpMacAddress | 1.3.6.1.4.1.4413.1.1.2.1.10.1.3 | PhysAddress | RC | obsolete |
column · PhysAddress · read-create · obsolete The hardware MAX Address that each interface maps to. | ||||
| CagentSwitchArpInterface | 1.3.6.1.4.1.4413.1.1.2.1.10.1.4 | Integer32 | RC | obsolete |
column · Integer32 · read-create · obsolete The Associated IfIndex which identified the ARP Entry. | ||||
| CagentSwitchArpType | 1.3.6.1.4.1.4413.1.1.2.1.10.1.5 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete The type of ARP entry.
| ||||
| CagentSwitchArpStatus | 1.3.6.1.4.1.4413.1.1.2.1.10.1.6 | RowStatus | RW | obsolete |
column · RowStatus · read-write · obsolete The status of this ARP entry. Setting this object destroy will remove the entry. | ||||
| TagentSwitchLocalProxyArpTable | 1.3.6.1.4.1.4413.1.1.2.1.11 | NA | ||
table · not-accessible · current This table contains the per-interface configuration parameters for Local Proxy Arp. | ||||
| RagentSwitchLocalProxyArpEntry | 1.3.6.1.4.1.4413.1.1.2.1.11.1 | NA | ||
row · not-accessible · current Represents a logical row in the agentSwitchLocalProxyArpTable
| ||||
| CagentSwitchLocalProxyArpMode | 1.3.6.1.4.1.4413.1.1.2.1.11.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The Local Proxy Arp Mode for the interface.
| ||||
| TagentSwitchIntfArpTable | 1.3.6.1.4.1.4413.1.1.2.1.12 | NA | ||
table · not-accessible · current This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. | ||||
| RagentSwitchIntfArpEntry | 1.3.6.1.4.1.4413.1.1.2.1.12.1 | NA | ||
row · not-accessible · current | ||||
| CagentSwitchIntfArpIpAddress | 1.3.6.1.4.1.4413.1.1.2.1.12.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The Type of Address assigned to this interface. | ||||
| CagentSwitchIntfArpIfIndex | 1.3.6.1.4.1.4413.1.1.2.1.12.1.2 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface | ||||
| CagentSwitchIntfArpAge | 1.3.6.1.4.1.4413.1.1.2.1.12.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging. | ||||
| CagentSwitchIntfArpMacAddress | 1.3.6.1.4.1.4413.1.1.2.1.12.1.4 | PhysAddress | RC | |
column · PhysAddress · read-create · current The hardware MAX Address that each interface maps to. | ||||
| CagentSwitchIntfArpType | 1.3.6.1.4.1.4413.1.1.2.1.12.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of ARP entry.
| ||||
| CagentSwitchIntfArpStatus | 1.3.6.1.4.1.4413.1.1.2.1.12.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this ARP entry. Setting this object destroy will remove the entry. | ||||
| NagentSwitchIpGroup | 1.3.6.1.4.1.4413.1.1.2.2 | |||
| SagentSwitchIpRoutingMode | 1.3.6.1.4.1.4413.1.1.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Administratively enables/disables routing on the switch.
| ||||
| SagentSwitchIpDefaultGateway | 1.3.6.1.4.1.4413.1.1.2.2.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current Specifies the Default Gateway manually configured. | ||||
| TagentSwitchIpInterfaceTable | 1.3.6.1.4.1.4413.1.1.2.2.3 | NA | ||
| RagentSwitchIpInterfaceEntry | 1.3.6.1.4.1.4413.1.1.2.2.3.1 | NA | ||
row · not-accessible · current | ||||
| CagentSwitchIpInterfaceIfIndex | 1.3.6.1.4.1.4413.1.1.2.2.3.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The IfIndex associated with this instance. | ||||
| CagentSwitchIPAddressConfigMethod | 1.3.6.1.4.1.4413.1.1.2.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The Source of the IP Address. User can set the object to none(0) or dhcp(2). Option dhcp(2) enables Dhcp Client on the interface. Option none(0) disables Dhcp Client on the interface. Get on this object returns manual(1) only when the interface has a manually configured address.
| ||||
| CagentSwitchIpInterfaceIpAddress | 1.3.6.1.4.1.4413.1.1.2.2.3.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time. | ||||
| CagentSwitchIpInterfaceNetMask | 1.3.6.1.4.1.4413.1.1.2.2.3.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time. | ||||
| CagentSwitchIpInterfaceClearIp | 1.3.6.1.4.1.4413.1.1.2.2.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the interfaces IpAddress and NetMask back to 0.0.0.0
| ||||
| CagentSwitchIpInterfaceRoutingMode | 1.3.6.1.4.1.4413.1.1.2.2.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables routing for this interface.
| ||||
| CagentSwitchIpInterfaceProxyARPMode | 1.3.6.1.4.1.4413.1.1.2.2.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables Proxy ARP for this interface.
| ||||
| CagentSwitchIpInterfaceMtuValue | 1.3.6.1.4.1.4413.1.1.2.2.3.1.8 | Unsigned32 (0 | 68..9198) | RW | |
column · Unsigned32 (0 | 68..9198) · read-write · current Configures the MTU value for this interface. The applicable range is 68 to the <interface MTU value - 18>, in bytes. Get of this object returns the effective MTU value on the interface. Set of this object with a value of 0 resets the MTU to the default IP MTU value on the interface. | ||||
| CagentSwitchIpInterfaceBandwidth | 1.3.6.1.4.1.4413.1.1.2.2.3.1.9 | Unsigned32 (0 | 1..10000000) | RW | |
column · Unsigned32 (0 | 1..10000000) · read-write · current Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured. | ||||
| CagentSwitchIpInterfaceUnnumberedIfIndex | 1.3.6.1.4.1.4413.1.1.2.2.3.1.10 | InterfaceIndexOrZero | RW | |
column · InterfaceIndexOrZero · read-write · current If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from. | ||||
| CagentSwitchIpInterfaceIcmpUnreachables | 1.3.6.1.4.1.4413.1.1.2.2.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current If this object is enable, it indicates that ICMP unreachables can be sent on this interface.
| ||||
| CagentSwitchIpInterfaceIcmpRedirects | 1.3.6.1.4.1.4413.1.1.2.2.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface.
| ||||
| CagentSwitchDhcpOperation | 1.3.6.1.4.1.4413.1.1.2.2.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Renew or Release the IP Address learned through DHCP. Get on this object always gives none. none means no operation is performed on dhcp.
| ||||
| CagentSwitchIpInterfaceSuppressed | 1.3.6.1.4.1.4413.1.1.2.2.3.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This mib variable contains the following values, which has the meaning as: 'unsuppressed' - The interface is not suppressed 'suppressed' - The interface is suppressed
| ||||
| CagentSwitchIpInterfaceNumberOfFlaps | 1.3.6.1.4.1.4413.1.1.2.2.3.1.15 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current This mib variable displays the number of flaps occurred on the interface | ||||
| CagentSwitchIpInterfaceCurrentPenalty | 1.3.6.1.4.1.4413.1.1.2.2.3.1.16 | Unsigned32 (0..20000) | RO | |
column · Unsigned32 (0..20000) · read-only · current This mib variable displays the current penalty of an interface | ||||
| CagentSwitchIpInterfaceReUseTime | 1.3.6.1.4.1.4413.1.1.2.2.3.1.17 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current This mib variable displays the number of seconds until the interface is allowed to come up | ||||
| TagentSwitchIpRouterDiscoveryTable | 1.3.6.1.4.1.4413.1.1.2.2.4 | NA | ||
table · not-accessible · current There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well. | ||||
| RagentSwitchIpRouterDiscoveryEntry | 1.3.6.1.4.1.4413.1.1.2.2.4.1 | NA | ||
row · not-accessible · current | ||||
| CagentSwitchIpRouterDiscoveryIfIndex | 1.3.6.1.4.1.4413.1.1.2.2.4.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current Interface Number to configure Router Discovery on. | ||||
| CagentSwitchIpRouterDiscoveryAdvertiseMode | 1.3.6.1.4.1.4413.1.1.2.2.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable router discovery on the interface.
| ||||
| CagentSwitchIpRouterDiscoveryMaxAdvertisementInterval | 1.3.6.1.4.1.4413.1.1.2.2.4.1.3 | Integer32 (4..1800) | RW | |
column · Integer32 (4..1800) · read-write · current Maximum time allowed between sending router advertisements from the interface. | ||||
| CagentSwitchIpRouterDiscoveryMinAdvertisementInterval | 1.3.6.1.4.1.4413.1.1.2.2.4.1.4 | Integer32 (3..1800) | RW | |
column · Integer32 (3..1800) · read-write · current Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval. | ||||
| CagentSwitchIpRouterDiscoveryAdvertisementLifetime | 1.3.6.1.4.1.4413.1.1.2.2.4.1.5 | Integer32 (4..9000) | RW | |
column · Integer32 (4..9000) · read-write · current Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval. | ||||
| CagentSwitchIpRouterDiscoveryPreferenceLevel | 1.3.6.1.4.1.4413.1.1.2.2.4.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference. | ||||
| CagentSwitchIpRouterDiscoveryAdvertisementAddress | 1.3.6.1.4.1.4413.1.1.2.2.4.1.7 | IpAddress | RW | |
column · IpAddress · read-write · current Address used when sending router advertisements from the interface. | ||||
| TagentSwitchIpVlanTable | 1.3.6.1.4.1.4413.1.1.2.2.5 | NA | ||
| RagentSwitchIpVlanEntry | 1.3.6.1.4.1.4413.1.1.2.2.5.1 | NA | ||
row · not-accessible · current A Static VLAN for which routing can be enabled/disabled
| ||||
| CagentSwitchIpVlanId | 1.3.6.1.4.1.4413.1.1.2.2.5.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The Vlan's Id. | ||||
| CagentSwitchIpVlanIfIndex | 1.3.6.1.4.1.4413.1.1.2.2.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The IfIndex associated with this VLAN. | ||||
| CagentSwitchIpVlanRoutingStatus | 1.3.6.1.4.1.4413.1.1.2.2.5.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing | ||||
| TagentSwitchSecondaryAddressTable | 1.3.6.1.4.1.4413.1.1.2.2.6 | NA | ||
table · not-accessible · current Contains a list of secondary IP Addresses associated with an interface. | ||||
| RagentSwitchSecondaryAddressEntry | 1.3.6.1.4.1.4413.1.1.2.2.6.1 | NA | ||
row · not-accessible · current A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the agentSwitchIpInterfaceTable. | ||||
| CagentSwitchSecondaryIpAddress | 1.3.6.1.4.1.4413.1.1.2.2.6.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The Secondary IP Address assigned to this interface. | ||||
| CagentSwitchSecondaryNetMask | 1.3.6.1.4.1.4413.1.1.2.2.6.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed. | ||||
| CagentSwitchSecondaryStatus | 1.3.6.1.4.1.4413.1.1.2.2.6.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Creates a new entry in the Secondary Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchSecondaryNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface. | ||||
| TagentSwitchHelperAddressTable | 1.3.6.1.4.1.4413.1.1.2.2.7 | NA | obsolete | |
table · not-accessible · obsolete Replaced by agentSwitchIntfIpHelperAddressTable. | ||||
| RagentSwitchHelperAddressEntry | 1.3.6.1.4.1.4413.1.1.2.2.7.1 | NA | obsolete | |
row · not-accessible · obsolete A Helper IP Address for a given interface. | ||||
| CagentSwitchHelperIpAddress | 1.3.6.1.4.1.4413.1.1.2.2.7.1.1 | IpAddress | NA | obsolete |
column · IpAddress · not-accessible · obsolete The Helper IP Address assigned to this interface. | ||||
| CagentSwitchHelperStatus | 1.3.6.1.4.1.4413.1.1.2.2.7.1.2 | RowStatus | RC | obsolete |
column · RowStatus · read-create · obsolete Creates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchHelperNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface. | ||||
| NagentSwitchIpIcmpControlGroup | 1.3.6.1.4.1.4413.1.1.2.2.8 | |||
| SagentSwitchIpIcmpEchoReplyMode | 1.3.6.1.4.1.4413.1.1.2.2.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the administrative Echo Reply Mode.
| ||||
| SagentSwitchIpIcmpRedirectsMode | 1.3.6.1.4.1.4413.1.1.2.2.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the administrative Mode for sending Redirects.
| ||||
| SagentSwitchIpIcmpRateLimitInterval | 1.3.6.1.4.1.4413.1.1.2.2.8.3 | Integer32 (0..2147483647) | RW | |
scalar · Integer32 (0..2147483647) · read-write · current Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. | ||||
| SagentSwitchIpIcmpRateLimitBurstSize | 1.3.6.1.4.1.4413.1.1.2.2.8.4 | Integer32 (1..200) | RW | |
scalar · Integer32 (1..200) · read-write · current Specifies the number of tokens to be placed after timeout. | ||||
| TagentSwitchIntfIpHelperAddressTable | 1.3.6.1.4.1.4413.1.1.2.2.10 | NA | ||
table · not-accessible · current Contains a list of IP helper addresses associated with an interface. | ||||
| RagentSwitchIntfIpHelperAddressEntry | 1.3.6.1.4.1.4413.1.1.2.2.10.1 | NA | ||
row · not-accessible · current An IP helper address for a given interface. | ||||
| CagentSwitchIntfIpHelperIpAddress | 1.3.6.1.4.1.4413.1.1.2.2.10.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current An IP helper address for packets received on this interface. An address of 0.0.0.0 identifies the entry as a discard entry. Packets that match a discard entry are dropped. | ||||
| CagentSwitchIntfIpHelperUdpPort | 1.3.6.1.4.1.4413.1.1.2.2.10.1.2 | Unsigned32 (0..65535) | NA | |
column · Unsigned32 (0..65535) · not-accessible · current UDP port number. Received packets with this destination UDP port number are forwarded to the helper address in this entry. | ||||
| CagentSwitchIntfIpHelperDiscard | 1.3.6.1.4.1.4413.1.1.2.2.10.1.3 | TruthValue | RW | obsolete |
column · TruthValue · read-write · obsolete Variable obsoleted. To create a discard entry, set the helper address to 0.0.0.0. | ||||
| CagentSwitchIntfIpHelperHitCount | 1.3.6.1.4.1.4413.1.1.2.2.10.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times a packet has been forwarded or discarded according to this entry. | ||||
| CagentSwitchIntfIpHelperStatus | 1.3.6.1.4.1.4413.1.1.2.2.10.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry. | ||||
| SagentSwitchClearIpDefaultGateway | 1.3.6.1.4.1.4413.1.1.2.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Resets the Global Default Gateway address.
| ||||
| NagentRouterRipConfigGroup | 1.3.6.1.4.1.4413.1.1.2.3 | |||
| SagentRouterRipAdminState | 1.3.6.1.4.1.4413.1.1.2.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the administrative mode of RIP in the router.
| ||||
| SagentRouterRipSplitHorizonMode | 1.3.6.1.4.1.4413.1.1.2.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
| ||||
| SagentRouterRipAutoSummaryMode | 1.3.6.1.4.1.4413.1.1.2.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1).
| ||||
| SagentRouterRipHostRoutesAcceptMode | 1.3.6.1.4.1.4413.1.1.2.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1).
| ||||
| SagentRouterRipDefaultMetric | 1.3.6.1.4.1.4413.1.1.2.3.5 | Integer32 (0 | 1..15) | RW | |
scalar · Integer32 (0 | 1..15) · read-write · current Default metric of redistributed routes, when RIP redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..15). | ||||
| SagentRouterRipDefaultMetricConfigured | 1.3.6.1.4.1.4413.1.1.2.3.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine whether RIP default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed. | ||||
| SagentRouterRipDefaultInfoOriginate | 1.3.6.1.4.1.4413.1.1.2.3.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine, whether RIP can advertise a default-route learned from another protocol. | ||||
| TagentRipRouteRedistTable | 1.3.6.1.4.1.4413.1.1.2.3.8 | NA | ||
table · not-accessible · current This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected. | ||||
| RagentRipRouteRedistEntry | 1.3.6.1.4.1.4413.1.1.2.3.8.1 | NA | ||
row · not-accessible · current | ||||
| CagentRipRouteRedistSource | 1.3.6.1.4.1.4413.1.1.2.3.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
| ||||
| CagentRipRouteRedistMode | 1.3.6.1.4.1.4413.1.1.2.3.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current User enabels/disables route-redistribution for a particular source protocol.
| ||||
| CagentRipRouteRedistMetric | 1.3.6.1.4.1.4413.1.1.2.3.8.1.3 | Integer32 (0 | 1..15) | RW | |
column · Integer32 (0 | 1..15) · read-write · current Metric used for redistributing a particular source protocol route
into RIP. {0} indicates that the parameter is not configured, this value
should not be set. Valid range for set is (1..15). | ||||
| CagentRipRouteRedistMetricConfigured | 1.3.6.1.4.1.4413.1.1.2.3.8.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Flag to determine whether RIP redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed. | ||||
| CagentRipRouteRedistMatchInternal | 1.3.6.1.4.1.4413.1.1.2.3.8.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
| ||||
| CagentRipRouteRedistMatchExternal1 | 1.3.6.1.4.1.4413.1.1.2.3.8.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
| ||||
| CagentRipRouteRedistMatchExternal2 | 1.3.6.1.4.1.4413.1.1.2.3.8.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
| ||||
| CagentRipRouteRedistMatchNSSAExternal1 | 1.3.6.1.4.1.4413.1.1.2.3.8.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
| ||||
| CagentRipRouteRedistMatchNSSAExternal2 | 1.3.6.1.4.1.4413.1.1.2.3.8.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
| ||||
| CagentRipRouteRedistDistList | 1.3.6.1.4.1.4413.1.1.2.3.8.1.10 | Unsigned32 (1..199) | RW | |
column · Unsigned32 (1..199) · read-write · current Access-list number of the access-list, which filters routes received from a source-protocol. A value of 0 indicates no distribute list is configured. | ||||
| CagentRipRouteRedistDistListConfigured | 1.3.6.1.4.1.4413.1.1.2.3.8.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current Flag to determine whether Access-list is configured or not. | ||||
| TagentRip2IfConfTable | 1.3.6.1.4.1.4413.1.1.2.3.9 | NA | ||
table · not-accessible · current A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. | ||||
| RagentRip2IfConfEntry | 1.3.6.1.4.1.4413.1.1.2.3.9.1 | NA | ||
row · not-accessible · current A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
| ||||
| CagentRip2IfConfAuthKeyId | 1.3.6.1.4.1.4413.1.1.2.3.9.1.1 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used. | ||||
| SagentRouterRipRoutePref | 1.3.6.1.4.1.4413.1.1.2.3.10 | INTEGER (1..255) | RC | |
scalar · INTEGER (1..255) · read-create · current The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable. | ||||
| NagentRouterOspfConfigGroup | 1.3.6.1.4.1.4413.1.1.2.4 | |||
| SagentOspfDefaultMetric | 1.3.6.1.4.1.4413.1.1.2.4.1 | Integer32 (0 | 1..16777214) | RW | |
scalar · Integer32 (0 | 1..16777214) · read-write · current Default metric of redistributed routes, when OSPF redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..16777214). | ||||
| SagentOspfDefaultMetricConfigured | 1.3.6.1.4.1.4413.1.1.2.4.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed. | ||||
| SagentOspfDefaultInfoOriginate | 1.3.6.1.4.1.4413.1.1.2.4.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine, whether OSPF can advertise a default-route learned from another protocol. | ||||
| SagentOspfDefaultInfoOriginateAlways | 1.3.6.1.4.1.4413.1.1.2.4.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route. | ||||
| SagentOspfDefaultInfoOriginateMetric | 1.3.6.1.4.1.4413.1.1.2.4.5 | Integer32 (0 | 1..16777214) | RW | |
scalar · Integer32 (0 | 1..16777214) · read-write · current Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..16777214). | ||||
| SagentOspfDefaultInfoOriginateMetricConfigured | 1.3.6.1.4.1.4413.1.1.2.4.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed. | ||||
| SagentOspfDefaultInfoOriginateMetricType | 1.3.6.1.4.1.4413.1.1.2.4.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
| ||||
| TagentOspfRouteRedistTable | 1.3.6.1.4.1.4413.1.1.2.4.8 | NA | ||
table · not-accessible · current This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected. | ||||
| RagentOspfRouteRedistEntry | 1.3.6.1.4.1.4413.1.1.2.4.8.1 | NA | ||
row · not-accessible · current | ||||
| CagentOspfRouteRedistSource | 1.3.6.1.4.1.4413.1.1.2.4.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
| ||||
| CagentOspfRouteRedistMode | 1.3.6.1.4.1.4413.1.1.2.4.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current User enabels/disables route-redistribution for a particular source protocol.
| ||||
| CagentOspfRouteRedistMetric | 1.3.6.1.4.1.4413.1.1.2.4.8.1.3 | Integer32 (0..16777214) | RW | |
column · Integer32 (0..16777214) · read-write · current Metric used for redistributing a particular source protocol route into OSPF. | ||||
| CagentOspfRouteRedistMetricConfigured | 1.3.6.1.4.1.4413.1.1.2.4.8.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Flag to determine whether OSPF redistribute-metric is configured or not. | ||||
| CagentOspfRouteRedistMetricType | 1.3.6.1.4.1.4413.1.1.2.4.8.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
| ||||
| CagentOspfRouteRedistTag | 1.3.6.1.4.1.4413.1.1.2.4.8.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current It specifies the tag field in routes redistributed by OSPF. | ||||
| CagentOspfRouteRedistSubnets | 1.3.6.1.4.1.4413.1.1.2.4.8.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current If this value is false, then OSPF will not redistribute subnetted routes. | ||||
| CagentOspfRouteRedistDistList | 1.3.6.1.4.1.4413.1.1.2.4.8.1.8 | Unsigned32 (1..199) | RW | |
column · Unsigned32 (1..199) · read-write · current Access-list number of the access-list, which filters routes received from a source-protocol. | ||||
| CagentOspfRouteRedistDistListConfigured | 1.3.6.1.4.1.4413.1.1.2.4.8.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Flag to determine whether Access-list is configured or not. | ||||
| TagentOspfIfTable | 1.3.6.1.4.1.4413.1.1.2.4.9 | NA | ||
table · not-accessible · current The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. | ||||
| RagentOspfIfEntry | 1.3.6.1.4.1.4413.1.1.2.4.9.1 | NA | ||
row · not-accessible · current The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
| ||||
| CagentOspfIfAuthKeyId | 1.3.6.1.4.1.4413.1.1.2.4.9.1.1 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used. | ||||
| CagentOspfIfIpMtuIgnoreFlag | 1.3.6.1.4.1.4413.1.1.2.4.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Configures the IP MTU Ignore Flag value for this OSPF interface.
| ||||
| CagentOspfIfPassiveMode | 1.3.6.1.4.1.4413.1.1.2.4.9.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation. | ||||
| CagentOspfIfAdvertiseSecondaries | 1.3.6.1.4.1.4413.1.1.2.4.9.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Configures the advertisability of the secondary addresses configured on this interface.
| ||||
| TagentOspfVirtIfTable | 1.3.6.1.4.1.4413.1.1.2.4.10 | NA | ||
table · not-accessible · current Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. | ||||
| RagentOspfVirtIfEntry | 1.3.6.1.4.1.4413.1.1.2.4.10.1 | NA | ||
row · not-accessible · current Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
| ||||
| CagentOspfVirtIfAuthKeyId | 1.3.6.1.4.1.4413.1.1.2.4.10.1.1 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used. | ||||
| SagentRouterOspfRFC1583CompatibilityMode | 1.3.6.1.4.1.4413.1.1.2.4.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
| ||||
| SagentOspfSpfDelayTime | 1.3.6.1.4.1.4413.1.1.2.4.12 | SpfTimerRange | RW | |
scalar · SpfTimerRange · read-write · current Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A value of 0 means that there is no delay; that is, the SPF calculation is started immediately. | ||||
| SagentOspfSpfHoldTime | 1.3.6.1.4.1.4413.1.1.2.4.13 | SpfTimerRange | RW | |
scalar · SpfTimerRange · read-write · current Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay; that is, two SPF calculations can be done, one immediately after the other. | ||||
| SagentOspfAutoCostRefBw | 1.3.6.1.4.1.4413.1.1.2.4.14 | AutoCostRefBw | RW | |
scalar · AutoCostRefBw · read-write · current Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps. | ||||
| SagentOspfOpaqueLsaSupport | 1.3.6.1.4.1.4413.1.1.2.4.15 | TruthValue | RW | |
scalar · TruthValue · read-write · current The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. | ||||
| TagentOspfAreaOpaqueLsdbTable | 1.3.6.1.4.1.4413.1.1.2.4.16 | NA | ||
table · not-accessible · current The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to. | ||||
| RagentOspfAreaOpaqueLsdbEntry | 1.3.6.1.4.1.4413.1.1.2.4.16.1 | NA | ||
row · not-accessible · current A single AreaOpaque Link State Advertisement. | ||||
| CagentOspfAreaOpaqueLsdbAreaId | 1.3.6.1.4.1.4413.1.1.2.4.16.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit identifier of the Area from which the LSA was received. | ||||
| CagentOspfAreaOpaqueLsdbType | 1.3.6.1.4.1.4413.1.1.2.4.16.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertisement format.
| ||||
| CagentOspfAreaOpaqueLsdbLsid | 1.3.6.1.4.1.4413.1.1.2.4.16.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CagentOspfAreaOpaqueLsdbRouterId | 1.3.6.1.4.1.4413.1.1.2.4.16.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CagentOspfAreaOpaqueLsdbSequence | 1.3.6.1.4.1.4413.1.1.2.4.16.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CagentOspfAreaOpaqueLsdbAge | 1.3.6.1.4.1.4413.1.1.2.4.16.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds.
| ||||
| CagentOspfAreaOpaqueLsdbChecksum | 1.3.6.1.4.1.4413.1.1.2.4.16.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CagentOspfAreaOpaqueLsdbAdvertisement | 1.3.6.1.4.1.4413.1.1.2.4.16.1.8 | OCTET STRING (SIZE (1..65535)) | RO | |
column · OCTET STRING (SIZE (1..65535)) · read-only · current The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size | ||||
| TagentOspfLocalLsdbTable | 1.3.6.1.4.1.4413.1.1.2.4.17 | NA | ||
table · not-accessible · current The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Advertisements for non-virtual links. The purpose is to allow Link-Local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs which are defined in 'The OSPF Opaque LSA Option'. | ||||
| RagentOspfLocalLsdbEntry | 1.3.6.1.4.1.4413.1.1.2.4.17.1 | NA | ||
row · not-accessible · current A single Link State Advertisement. | ||||
| CagentOspfLocalLsdbIpAddress | 1.3.6.1.4.1.4413.1.1.2.4.17.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP Address of the interface from which the LSA was received if the interface is numbered. | ||||
| CagentOspfLocalLsdbAddressLessIf | 1.3.6.1.4.1.4413.1.1.2.4.17.1.2 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The Interface Index of the interface from which the LSA was received if the interface is unnumbered. | ||||
| CagentOspfLocalLsdbType | 1.3.6.1.4.1.4413.1.1.2.4.17.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CagentOspfLocalLsdbLsid | 1.3.6.1.4.1.4413.1.1.2.4.17.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CagentOspfLocalLsdbRouterId | 1.3.6.1.4.1.4413.1.1.2.4.17.1.5 | RouterID | RO | |
column · RouterID · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CagentOspfLocalLsdbSequence | 1.3.6.1.4.1.4413.1.1.2.4.17.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CagentOspfLocalLsdbAge | 1.3.6.1.4.1.4413.1.1.2.4.17.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds.
| ||||
| CagentOspfLocalLsdbChecksum | 1.3.6.1.4.1.4413.1.1.2.4.17.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CagentOspfLocalLsdbAdvertisement | 1.3.6.1.4.1.4413.1.1.2.4.17.1.9 | OCTET STRING (SIZE (1..65535)) | RO | |
column · OCTET STRING (SIZE (1..65535)) · read-only · current The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. | ||||
| TagentOspfAsLsdbTable | 1.3.6.1.4.1.4413.1.1.2.4.18 | NA | ||
table · not-accessible · current The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area. | ||||
| RagentOspfAsLsdbEntry | 1.3.6.1.4.1.4413.1.1.2.4.18.1 | NA | ||
row · not-accessible · current A single Link State Advertisement. | ||||
| CagentOspfAsLsdbType | 1.3.6.1.4.1.4413.1.1.2.4.18.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the link state advertisement. Each link state type has a separate advertise- ment format.
| ||||
| CagentOspfAsLsdbLsid | 1.3.6.1.4.1.4413.1.1.2.4.18.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CagentOspfAsLsdbRouterId | 1.3.6.1.4.1.4413.1.1.2.4.18.1.3 | RouterID | RO | |
column · RouterID · read-only · current The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CagentOspfAsLsdbSequence | 1.3.6.1.4.1.4413.1.1.2.4.18.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CagentOspfAsLsdbAge | 1.3.6.1.4.1.4413.1.1.2.4.18.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the age of the link state adver- tisement in seconds.
| ||||
| CagentOspfAsLsdbChecksum | 1.3.6.1.4.1.4413.1.1.2.4.18.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CagentOspfAsLsdbAdvertisement | 1.3.6.1.4.1.4413.1.1.2.4.18.1.7 | OCTET STRING (SIZE (1..65535)) | RO | |
column · OCTET STRING (SIZE (1..65535)) · read-only · current The entire Link State Advertisement, including its header. | ||||
| SagentOspfDefaultPassiveMode | 1.3.6.1.4.1.4413.1.1.2.4.19 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation. | ||||
| SagentOspfRoutePrefIntraArea | 1.3.6.1.4.1.4413.1.1.2.4.20 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. | ||||
| SagentOspfRoutePrefInterArea | 1.3.6.1.4.1.4413.1.1.2.4.21 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. | ||||
| SagentOspfRoutePrefExternal | 1.3.6.1.4.1.4413.1.1.2.4.22 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable. | ||||
| NagentSnmpTrapFlagsConfigGroupLayer3 | 1.3.6.1.4.1.4413.1.1.2.5 | |||
| SagentSnmpVRRPNewMasterTrapFlag | 1.3.6.1.4.1.4413.1.1.2.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This flag enables the sending of VRRP new master notification traps.
| ||||
| SagentSnmpVRRPAuthFailureTrapFlag | 1.3.6.1.4.1.4413.1.1.2.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This flag enables the sending of VRRP authentication failure notification traps.
| ||||
| NagentBootpDhcpRelayGroup | 1.3.6.1.4.1.4413.1.1.2.6 | |||
| SagentBootpDhcpRelayMaxHopCount | 1.3.6.1.4.1.4413.1.1.2.6.1 | Integer32 (1..16) | RW | |
scalar · Integer32 (1..16) · read-write · current The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped through the intermediate agents. The default value is 4. | ||||
| SagentBootpDhcpRelayForwardingIp | 1.3.6.1.4.1.4413.1.1.2.6.2 | IpAddress | RW | obsolete |
scalar · IpAddress · read-write · obsolete DHCP server addresses are now configured through IP helper. | ||||
| SagentBootpDhcpRelayForwardMode | 1.3.6.1.4.1.4413.1.1.2.6.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The DHCP relay admin mode is replaced by the IP helper admin mode.
| ||||
| SagentBootpDhcpRelayMinWaitTime | 1.3.6.1.4.1.4413.1.1.2.6.4 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began booting) field of the request as a factor in deciding whether to relay the request or not. | ||||
| SagentBootpDhcpRelayCircuitIdOptionMode | 1.3.6.1.4.1.4413.1.1.2.6.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
| ||||
| SagentBootpDhcpRelayNumOfRequestsReceived | 1.3.6.1.4.1.4413.1.1.2.6.6 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Replaced by IP helper statistics. | ||||
| SagentBootpDhcpRelayNumOfRequestsForwarded | 1.3.6.1.4.1.4413.1.1.2.6.7 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Replaced by IP helper statistics. | ||||
| SagentBootpDhcpRelayNumOfDiscards | 1.3.6.1.4.1.4413.1.1.2.6.8 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Replaced by IP helper statistics. | ||||
| SagentBootpDhcpRelayCheckReply | 1.3.6.1.4.1.4413.1.1.2.6.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The BOOTP/DHCP relay option validity check in BOOTREPLY message. This flag is set to enable/disable the check for Circuit ID sub-options.
| ||||
| TagentBootpDhcpRelayIntfTable | 1.3.6.1.4.1.4413.1.1.2.6.10 | NA | ||
table · not-accessible · current This table contains the per-interface configuration parameters for Dhcp Relay agent. | ||||
| RagentBootpDhcpRelayIntfEntry | 1.3.6.1.4.1.4413.1.1.2.6.10.1 | NA | ||
row · not-accessible · current Represents a logical row in the agentBootpDhcpRelayIntfTable
| ||||
| CagentBootpVlanId | 1.3.6.1.4.1.4413.1.1.2.6.10.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The Vlan's Id. | ||||
| CagentBootpDhcpRelayIntfCircuitIdOptionMode | 1.3.6.1.4.1.4413.1.1.2.6.10.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options at interface level.
| ||||
| CagentBootpDhcpRelayIntfCheckReply | 1.3.6.1.4.1.4413.1.1.2.6.10.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The BOOTP/DHCP Relay reply check. This flag is set to enable/disable the network element at interface level.
| ||||
| NagentECMPGroup | 1.3.6.1.4.1.4413.1.1.2.7 | |||
| SagentECMPOspfMaxPaths | 1.3.6.1.4.1.4413.1.1.2.7.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent. | ||||
| NagentRouterVrrpConfigGroup | 1.3.6.1.4.1.4413.1.1.2.8 | |||
| SagentRouterVrrpAdminState | 1.3.6.1.4.1.4413.1.1.2.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the administrative mode of VRRP in the router.
| ||||
| TagentRouterVrrpConfiguredTable | 1.3.6.1.4.1.4413.1.1.2.8.2 | NA | ||
table · not-accessible · current Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpConfiguredEntry' items. | ||||
| RagentRouterVrrpConfiguredEntry | 1.3.6.1.4.1.4413.1.1.2.8.2.1 | NA | ||
row · not-accessible · current An entry in the table contains operational priority that is associated with a virtual router.
| ||||
| CagentRouterVrrpConfiguredPriority | 1.3.6.1.4.1.4413.1.1.2.8.2.1.1 | Integer32 (1..254) | RO | |
column · Integer32 (1..254) · read-only · current This object specifies the value set by the vrrpOperPriority object. The GET operation on 'vrrpOperPriority' will be affected by both the tracking process and the configured priority set by the vrrpOperPriority object. | ||||
| NagentVrrpOperations | 1.3.6.1.4.1.4413.1.1.2.9 | |||
| TagentRouterVrrpOperTable | 1.3.6.1.4.1.4413.1.1.2.9.1 | NA | obsolete | |
table · not-accessible · obsolete Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpOperEntry' items. | ||||
| RagentRouterVrrpOperEntry | 1.3.6.1.4.1.4413.1.1.2.9.1.1 | NA | obsolete | |
row · not-accessible · obsolete An entry in the table contains operational priority that is associated with a virtual router.
| ||||
| CagentRouterVrrpOperPriority | 1.3.6.1.4.1.4413.1.1.2.9.1.1.1 | Integer32 (0..255) | RO | obsolete |
column · Integer32 (0..255) · read-only · obsolete This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by the vrrpOperPriority object. | ||||
| NagentRouterVrrpTrackGroup | 1.3.6.1.4.1.4413.1.1.2.10 | |||
| TagentRouterVrrpTrackIntfTable | 1.3.6.1.4.1.4413.1.1.2.10.1 | NA | ||
table · not-accessible · current Tracking table for a VRRP router which consists of agentRouterVrrpTrackIntfEntry items. | ||||
| RagentRouterVrrpTrackIntfEntry | 1.3.6.1.4.1.4413.1.1.2.10.1.1 | NA | ||
row · not-accessible · current An entry in the table contains tracked IP interfaces associated with a virtual router. | ||||
| CagentRouterVrrpTrackIntf | 1.3.6.1.4.1.4413.1.1.2.10.1.1.1 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current This object specifies the interface to be tracked. | ||||
| CagentRouterVrrpTrackIfPrioDec | 1.3.6.1.4.1.4413.1.1.2.10.1.1.2 | Integer32 (1..254) | RC | |
column · Integer32 (1..254) · read-create · current This object specifies the decrement priority of the VRRP router. | ||||
| CagentRouterVrrpTrackIfState | 1.3.6.1.4.1.4413.1.1.2.10.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current This object specifies the IP state of the tracked interface for the virtual router. | ||||
| CagentRouterVrrpTrackIfStatus | 1.3.6.1.4.1.4413.1.1.2.10.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To destroy the row set this object to destroy. | ||||
| TagentRouterVrrpTrackRouteTable | 1.3.6.1.4.1.4413.1.1.2.10.2 | NA | ||
table · not-accessible · current Tracking table for a VRRP router which consists of a 'agentRouterVrrpTrackRouteEntry' items. | ||||
| RagentRouterVrrpTrackRouteEntry | 1.3.6.1.4.1.4413.1.1.2.10.2.1 | NA | ||
row · not-accessible · current An entry in the table contains tracked Routes associated with a virtual router. | ||||
| CagentRouterVrrpTrackRtPfx | 1.3.6.1.4.1.4413.1.1.2.10.2.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current This object specifies the prefix of the route to be tracked. | ||||
| CagentRouterVrrpTrackRtPfxLen | 1.3.6.1.4.1.4413.1.1.2.10.2.1.2 | Integer32 (0..32) | NA | |
column · Integer32 (0..32) · not-accessible · current This object specifies prefix length of the route to be tracked. | ||||
| CagentRouterVrrpTrackRtPrioDec | 1.3.6.1.4.1.4413.1.1.2.10.2.1.3 | Integer32 (1..254) | RC | |
column · Integer32 (1..254) · read-create · current This object specifies the decrement priority of the VRRP router. | ||||
| CagentRouterVrrpTrackRtReachable | 1.3.6.1.4.1.4413.1.1.2.10.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This object specifies the reachability of the tracked route. | ||||
| CagentRouterVrrpTrackRtStatus | 1.3.6.1.4.1.4413.1.1.2.10.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To delete the tracked route set this object to destroy. | ||||
| NagentIpHelperGroup | 1.3.6.1.4.1.4413.1.1.2.11 | |||
| SagentIpHelperAdminMode | 1.3.6.1.4.1.4413.1.1.2.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Administratively enable or disable IP helper.
| ||||
| SagentDhcpClientMsgsReceived | 1.3.6.1.4.1.4413.1.1.2.11.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The Number of DHCP Requests Received. Total number of DHCP requests received from all clients. | ||||
| SagentDhcpClientMsgsRelayed | 1.3.6.1.4.1.4413.1.1.2.11.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The Number of DHCP Requests Forwarded. Total number of DHCP requests relayed to a server. | ||||
| SagentDhcpServerMsgsReceived | 1.3.6.1.4.1.4413.1.1.2.11.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of DHCP messages received from a server. | ||||
| SagentDhcpServerMsgsRelayed | 1.3.6.1.4.1.4413.1.1.2.11.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of DHCP messages relayed to a server. | ||||
| SagentUdpClientMsgsReceived | 1.3.6.1.4.1.4413.1.1.2.11.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of UDP messages received from all clients. | ||||
| SagentUdpClientMsgsRelayed | 1.3.6.1.4.1.4413.1.1.2.11.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of UDP messages relayed to a server. | ||||
| TagentSwitchIpHelperAddressTable | 1.3.6.1.4.1.4413.1.1.2.11.8 | NA | ||
table · not-accessible · current Contains a list of IP helper addresses configured globally. | ||||
| RagentSwitchIpHelperAddressEntry | 1.3.6.1.4.1.4413.1.1.2.11.8.1 | NA | ||
row · not-accessible · current An IP Helper address that applies to packets received on any interface. | ||||
| CagentSwitchIpHelperAddress | 1.3.6.1.4.1.4413.1.1.2.11.8.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP Helper address assigned to this interface. | ||||
| CagentSwitchIpHelperUdpPort | 1.3.6.1.4.1.4413.1.1.2.11.8.1.2 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current UDP port number. | ||||
| CagentSwitchIpHelperHitCount | 1.3.6.1.4.1.4413.1.1.2.11.8.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times a packet has been forwarded or discarded according to this entry. | ||||
| CagentSwitchIpHelperStatus | 1.3.6.1.4.1.4413.1.1.2.11.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry. | ||||
| SagentUdpClientMsgsTtlExpired | 1.3.6.1.4.1.4413.1.1.2.11.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of UDP messages received with an expired TTL. | ||||
| SagentUdpClientMsgsDiscarded | 1.3.6.1.4.1.4413.1.1.2.11.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of UDP messages that matched a discard entry. | ||||
| NagentInternalVlanGroup | 1.3.6.1.4.1.4413.1.1.2.12 | |||
| SagentInternalVlanBase | 1.3.6.1.4.1.4413.1.1.2.12.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current The VLAN ID internally assigned to the first port-based routing interface. | ||||
| SagentInternalVlanPolicy | 1.3.6.1.4.1.4413.1.1.2.12.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface.
| ||||
| TagentSwitchInternalVlanTable | 1.3.6.1.4.1.4413.1.1.2.12.3 | NA | ||
table · not-accessible · current Contains a list of VLAN IDs used internally for port-based routing interfaces. | ||||
| RagentSwitchInternalVlanEntry | 1.3.6.1.4.1.4413.1.1.2.12.3.1 | NA | ||
row · not-accessible · current A VLAN ID internally assigned to a port-based routing interface. | ||||
| CagentSwitchInternalVlanId | 1.3.6.1.4.1.4413.1.1.2.12.3.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current A VLAN ID internally assigned to a port-based routing interface. | ||||
| CagentSwitchInternalVlanIfIndex | 1.3.6.1.4.1.4413.1.1.2.12.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Interface index of port-based routing interface using this VLAN ID. | ||||
| NagentOspfQueueGroup | 1.3.6.1.4.1.4413.1.1.2.13 | |||
| TagentOspfQueueTable | 1.3.6.1.4.1.4413.1.1.2.13.1 | NA | ||
table · not-accessible · current Table lists information about OSPFv2 message queue utilization. | ||||
| RagentOspfQueueEntry | 1.3.6.1.4.1.4413.1.1.2.13.1.1 | NA | ||
row · not-accessible · current Information on a specific OSPFv2 message queue.
| ||||
| CagentOspfQueueIndex | 1.3.6.1.4.1.4413.1.1.2.13.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Index value for this message queue. | ||||
| CagentOspfQueueName | 1.3.6.1.4.1.4413.1.1.2.13.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Name of an OSPFv2 message queue. | ||||
| CagentOspfQueueLength | 1.3.6.1.4.1.4413.1.1.2.13.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of messages currently in the message queue. | ||||
| CagentOspfQueueHigh | 1.3.6.1.4.1.4413.1.1.2.13.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The high water mark of the number of messages in the message queue. | ||||
| CagentOspfQueueDrops | 1.3.6.1.4.1.4413.1.1.2.13.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of items dropped because the message queue was full. | ||||
| CagentOspfQueueLimit | 1.3.6.1.4.1.4413.1.1.2.13.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximum number of messages this queue can hold. | ||||
| NagentOspfPacketStatsGroup | 1.3.6.1.4.1.4413.1.1.2.14 | |||
| SagentOspfCountersCleared | 1.3.6.1.4.1.4413.1.1.2.14.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The time since OSPFv2 counters were last cleared, in seconds. | ||||
| SagentOspfLsaRetxCount | 1.3.6.1.4.1.4413.1.1.2.14.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of LSAs retransmitted since OSPF counters were last cleared. If the same LSA is retransmitted to multiple neighbors, the count is incremented for each neighbor. | ||||
| SagentOspfHellosRx | 1.3.6.1.4.1.4413.1.1.2.14.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 Hello packets received since OSPF counters were last cleared. | ||||
| SagentOspfHellosTx | 1.3.6.1.4.1.4413.1.1.2.14.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared. | ||||
| SagentOspfDdRx | 1.3.6.1.4.1.4413.1.1.2.14.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 Database Description packets received since OSPF counters were last cleared. | ||||
| SagentOspfDdTx | 1.3.6.1.4.1.4413.1.1.2.14.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared. | ||||
| SagentOspfLsReqRx | 1.3.6.1.4.1.4413.1.1.2.14.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Request packets received since OSPF counters were last cleared. | ||||
| SagentOspfLsReqTx | 1.3.6.1.4.1.4413.1.1.2.14.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared. | ||||
| SagentOspfLsUpdatesRx | 1.3.6.1.4.1.4413.1.1.2.14.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Update packets received since OSPF counters were last cleared. | ||||
| SagentOspfLsUpdatesTx | 1.3.6.1.4.1.4413.1.1.2.14.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Update packets transmitted since OSPF counters were last cleared. | ||||
| SagentOspfLsAckRx | 1.3.6.1.4.1.4413.1.1.2.14.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared. | ||||
| SagentOspfLsAckTx | 1.3.6.1.4.1.4413.1.1.2.14.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared. | ||||
| SagentOspfLsUpdatesRxMax | 1.3.6.1.4.1.4413.1.1.2.14.13 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum rate of OSPFv2 LS Update packets received over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second (that is, the number of packets received during the 5-second interval, divided by 5). | ||||
| SagentOspfLsUpdatesTxMax | 1.3.6.1.4.1.4413.1.1.2.14.14 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum rate of OSPFv2 LS Update packets transmitted over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second (that is, the number of packets transmitted during the 5-second interval, divided by 5). | ||||
| SagentOspfType1LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 1 (router) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType2LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 2 (network) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType3LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 3 (network summary) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType4LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 4 (ASBR summary) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType5LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 5 (external) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType7LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 7 (NSSA external) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType9LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 9 (Link Opaque) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType10LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 10 (Area Opaque) LSAs received since OSPF counters were last cleared. | ||||
| SagentOspfType11LsasRx | 1.3.6.1.4.1.4413.1.1.2.14.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of type 11 (AS Opaque) LSAs received since OSPF counters were last cleared. | ||||
| TagentOspfSpfStatsTable | 1.3.6.1.4.1.4413.1.1.2.15 | NA | ||
table · not-accessible · current Contains statistics for the twenty most recent SPF runs. Statistics are reported from the oldest SPF first to the most recent. | ||||
| RagentOspfSpfStatsEntry | 1.3.6.1.4.1.4413.1.1.2.15.1 | NA | ||
| CagentOspfSpfIndex | 1.3.6.1.4.1.4413.1.1.2.15.1.1 | Counter32 | NA | |
column · Counter32 · not-accessible · current Integer that uniquely identifies an SPF run. This value is incremented each time OSPF runs a full routing table calculation. | ||||
| CagentOspfSpfStatsDeltaT | 1.3.6.1.4.1.4413.1.1.2.15.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current How long since this routing table calculation ran. The time is given in seconds. | ||||
| CagentOspfSpfStatsIntra | 1.3.6.1.4.1.4413.1.1.2.15.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of milliseconds to compute intra-area routes. | ||||
| CagentOspfSpfStatsSumm | 1.3.6.1.4.1.4413.1.1.2.15.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of milliseconds to compute inter-area routes. | ||||
| CagentOspfSpfStatsExt | 1.3.6.1.4.1.4413.1.1.2.15.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of milliseconds to compute external routes. | ||||
| CagentOspfSpfStatsSpfTotal | 1.3.6.1.4.1.4413.1.1.2.15.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of milliseconds for entire routing table calculation. | ||||
| CagentOspfSpfStatsRibUpdate | 1.3.6.1.4.1.4413.1.1.2.15.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of milliseconds to update the common routing table. | ||||
| CagentOspfSpfStatsReason | 1.3.6.1.4.1.4413.1.1.2.15.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Reasons why a routing table calculation was required. R - new router LSA, N - new Network LSA, SN - new network summary LSA, SA - new ASBR summary LSA, X - new external LSA. | ||||
| NagentRoutingHeapGroup | 1.3.6.1.4.1.4413.1.1.2.16 | |||
| SagentRoutingHeapSize | 1.3.6.1.4.1.4413.1.1.2.16.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The size of the routing heap, in bytes. Unicast routing protocols and ARP allocate memory from the routing heap. | ||||
| SagentRoutingHeapInUse | 1.3.6.1.4.1.4413.1.1.2.16.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of bytes currently allocated from the routing heap. | ||||
| SagentRoutingHeapHigh | 1.3.6.1.4.1.4413.1.1.2.16.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current High water mark for the number of bytes allocated from the routing heap. | ||||
| NagentRoutingTableSummaryGroup | 1.3.6.1.4.1.4413.1.1.2.17 | |||
| SagentConnectedRoutes | 1.3.6.1.4.1.4413.1.1.2.17.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of connected routes in the IPv4 routing table. | ||||
| SagentStaticRoutes | 1.3.6.1.4.1.4413.1.1.2.17.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of static routes in the IPv4 routing table. | ||||
| SagentRipRoutes | 1.3.6.1.4.1.4413.1.1.2.17.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of RIP routes in the IPv4 routing table. | ||||
| SagentOspfRoutes | 1.3.6.1.4.1.4413.1.1.2.17.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of OSPFv2 routes in the IPv4 routing table. | ||||
| SagentOspfIntraRoutes | 1.3.6.1.4.1.4413.1.1.2.17.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of OSPFv2 intra-area routes in the IPv4 routing table. | ||||
| SagentOspfInterRoutes | 1.3.6.1.4.1.4413.1.1.2.17.6 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of OSPFv2 inter-area routes in the IPv4 routing table. | ||||
| SagentOspfExt1Routes | 1.3.6.1.4.1.4413.1.1.2.17.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of OSPFv2 external type 1 routes in the IPv4 routing table. | ||||
| SagentOspfExt2Routes | 1.3.6.1.4.1.4413.1.1.2.17.8 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of OSPFv2 external type 2 routes in the IPv4 routing table. | ||||
| SagentBgpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.9 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of BGP routes in the IPv4 routing table. | ||||
| SagentEbgpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.10 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of external BGP routes in the IPv4 routing table. | ||||
| SagentIbgpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of internal BGP routes in the IPv4 routing table. | ||||
| SagentLocalBgpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.12 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of local BGP routes in the IPv4 routing table. | ||||
| SagentRejectRoutes | 1.3.6.1.4.1.4413.1.1.2.17.13 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of reject routes in the IPv4 routing table. | ||||
| SagentTotalRoutes | 1.3.6.1.4.1.4413.1.1.2.17.14 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of routes in the IPv4 routing table. | ||||
| SagentBestRoutes | 1.3.6.1.4.1.4413.1.1.2.17.15 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of IPv4 routes in the forwarding table. | ||||
| SagentBestRoutesHigh | 1.3.6.1.4.1.4413.1.1.2.17.16 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest number of IPv4 routes in the forwarding table. | ||||
| SagentAlternateRoutes | 1.3.6.1.4.1.4413.1.1.2.17.17 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of alternate routes in the IPv4 routing table. An alternate route is less preferred than the best route and is not used for forwarding. | ||||
| SagentRouteAdds | 1.3.6.1.4.1.4413.1.1.2.17.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of routes added to the IPv4 routing table. | ||||
| SagentRouteModifies | 1.3.6.1.4.1.4413.1.1.2.17.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of routes changed in the IPv4 routing table. | ||||
| SagentRouteDeletes | 1.3.6.1.4.1.4413.1.1.2.17.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of routes removed from the IPv4 routing table. | ||||
| SagentUnresolvedRouteAdds | 1.3.6.1.4.1.4413.1.1.2.17.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of IPv4 route adds that failed because none of the route's next hops were on a local subnet. | ||||
| SagentInvalidRouteAdds | 1.3.6.1.4.1.4413.1.1.2.17.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of IPv4 routes adds that failed because the route was invalid. | ||||
| SagentFailedRouteAdds | 1.3.6.1.4.1.4413.1.1.2.17.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of IPv4 routes adds that failed because of a resource limitation in the routing table | ||||
| SagentReservedLocals | 1.3.6.1.4.1.4413.1.1.2.17.24 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down. | ||||
| SagentUniqueNextHops | 1.3.6.1.4.1.4413.1.1.2.17.25 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of distinct next hops used among all IPv4 routes currently in the routing table. These include local interfaces for local routes and neighbors for indirect routes. | ||||
| SagentUniqueNextHopsHigh | 1.3.6.1.4.1.4413.1.1.2.17.26 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest count of unique next hops since counters were last cleared. | ||||
| SagentNextHopGroups | 1.3.6.1.4.1.4413.1.1.2.17.27 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops. | ||||
| SagentNextHopGroupsHigh | 1.3.6.1.4.1.4413.1.1.2.17.28 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The highest count of next hop groups since counters were last cleared. | ||||
| SagentEcmpGroups | 1.3.6.1.4.1.4413.1.1.2.17.29 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of next hop groups with multiple next hops. | ||||
| SagentEcmpGroupsHigh | 1.3.6.1.4.1.4413.1.1.2.17.30 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The high water mark of the number of ECMP groups. | ||||
| SagentEcmpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.31 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of IPv4 routes with multiple next hops. | ||||
| SagentTruncEcmpRoutes | 1.3.6.1.4.1.4413.1.1.2.17.32 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When an ECMP route cannot be installed because such a limit is reached, the route is installed with a single next hop. | ||||
| SagentEcmpRetries | 1.3.6.1.4.1.4413.1.1.2.17.33 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop. | ||||
| TagentEcmpCountTable | 1.3.6.1.4.1.4413.1.1.2.18 | NA | ||
table · not-accessible · current A count of the number of routes with each number of ECMP next hops. | ||||
| RagentEcmpCountEntry | 1.3.6.1.4.1.4413.1.1.2.18.1 | NA | ||
row · not-accessible · current Number of IPv4 routes with a given number of next hops. | ||||
| CagentEcmpNextHopCount | 1.3.6.1.4.1.4413.1.1.2.18.1.1 | Unsigned32 (0..128) | NA | |
column · Unsigned32 (0..128) · not-accessible · current The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform. | ||||
| CagentEcmpRouteCount | 1.3.6.1.4.1.4413.1.1.2.18.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of IPv4 routes with agentEcmpNextHopCount next hops. | ||||
| NagentOspfStubRouterGroup | 1.3.6.1.4.1.4413.1.1.2.19 | |||
| SospfStubRouterAdvertisement | 1.3.6.1.4.1.4413.1.1.2.19.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specifies how the router LSAs are advertised by the router. The value doNotAdvertise indicates the advertisement of a standard router LSA and is the default value. The value advertise indicates the advertisement of a stub router LSA.
| ||||
| SagentOspfStubRouterReason | 1.3.6.1.4.1.4413.1.1.2.19.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current This indicates the reason because of which the router is in Stub mode. This is valid only if the agentOspfStubRouterMode is 'active'.
| ||||
| SagentOspfStubRouterStartupTimeRemaining | 1.3.6.1.4.1.4413.1.1.2.19.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The time remaining (in seconds) for the router to come out of the stub mode. This is valid only if the agentOspfStubRouterReason is 'startup'. | ||||
| SagentOspfStubRouterDuration | 1.3.6.1.4.1.4413.1.1.2.19.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Time elapsed (in seconds) since the router last entered the stub router mode. This is valid only if the agentOspfStubRouterMode is 'active' and agentOspfStubRouterReason is 'resource-limitation'. | ||||
Textual conventions
AutoCostRefBwUnsigned32 (1..4294967)The value of reference bandwidth from which ospf calculates metric cost.
SpfTimerRangeInteger32 (0..65535)The range of intervals on which Spf timers can be configured.