NETGEAR-POWER-ETHERNET-MIB
Broadcom LimitedThis MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB.
snmptranslate -m NETGEAR-POWER-ETHERNET-MIB -Tpsnmpwalk -v2c -c <community> -m NETGEAR-POWER-ETHERNET-MIB <host> 1.3.6.1.4.1.4413.1.1.15Imports
| POWER-ETHERNET-MIB | pethMainPseEntry, pethPsePortEntry |
|---|---|
| QUANTA-LB6M-REF-MIB | lb6m |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfastPathpowerEthernetMIB | 1.3.6.1.4.1.4413.1.1.15 | |||
identity This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB. | ||||
| NagentPethObjects | 1.3.6.1.4.1.4413.1.1.15.1 | |||
| TagentPethPsePortTable | 1.3.6.1.4.1.4413.1.1.15.1.1 | NA | ||
table · not-accessible · current A table of per-port information and configuration objects relating to the power status of each port. | ||||
| RagentPethPsePortEntry | 1.3.6.1.4.1.4413.1.1.15.1.1.1 | NA | ||
row · not-accessible · current A collection of objects providing additional power information and control parameters for the specified port.
| ||||
| CagentPethPowerLimit | 1.3.6.1.4.1.4413.1.1.15.1.1.1.1 | Gauge32 | RW | |
column · Gauge32 · read-write · current The configured maximum power this port can provide to an attached device measured in Milliwatts.
| ||||
| CagentPethOutputPower | 1.3.6.1.4.1.4413.1.1.15.1.1.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The power this port is supplying to an attached device measured in Milliwatts.
| ||||
| CagentPethOutputCurrent | 1.3.6.1.4.1.4413.1.1.15.1.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The current this port is supplying to an attached device measured in Milliamps.
| ||||
| CagentPethOutputVolts | 1.3.6.1.4.1.4413.1.1.15.1.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The voltage this port is supplying to an attached device measured in Volts.
| ||||
| CagentPethTemperature | 1.3.6.1.4.1.4413.1.1.15.1.1.1.5 | Gauge32 | RO | obsolete |
column · Gauge32 · read-only · obsolete The temperature measured at this port of the PoE Controller. It is measured in degree celcius.
| ||||
| CagentPethPowerLimitType | 1.3.6.1.4.1.4413.1.1.15.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Describes or controls the maximum power that a port can deliver. A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is equal to the value specified by agentPethPowerLimit
| ||||
| CagentPethHighPowerEnable | 1.3.6.1.4.1.4413.1.1.15.1.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts | ||||
| CagentPethPowerDetectionType | 1.3.6.1.4.1.4413.1.1.15.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of pre-ieee(1) means only legacy capacitive detection scheme is used. A value of ieee(2) means that IEEE 802.3af 4point detection scheme is used. A value of auto(3) means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. The value 'none' can not be forcibly set by the administrator.
| ||||
| CagentPethFaultStatus | 1.3.6.1.4.1.4413.1.1.15.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. A value of thermalShutdown(5) specifies that the thermal threshold has exceeded for the pse port. A value of startupFailure(6) as fault status indicates that the port does not have sufficient voltage.
| ||||
| CagentPethPortReset | 1.3.6.1.4.1.4413.1.1.15.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current A value of reset(1) is used to move the pse port dot3af state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor.
| ||||
| CagentPethPowerLimitMin | 1.3.6.1.4.1.4413.1.1.15.1.1.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum power this port can be configured to provide, measured in Milliwatts.
| ||||
| CagentPethPowerLimitMax | 1.3.6.1.4.1.4413.1.1.15.1.1.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum power this port can be configured to provide, measured in Milliwatts.
| ||||
| CagentPethHighPowerMode | 1.3.6.1.4.1.4413.1.1.15.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The mode configured for a PSE port to deliver high power. 'disable' means that a port is powered in the IEEE 802.3af mode. 'legacy' means that a port is powered using high-inrush current. 'pre-dot3at' means that a port is powered in the IEEE 802.3af mode initially, switched to the high-power IEEE 802.3at mode before 75msec. 'dot3at' means that a port is powered in the IEEE 802.3at mode. 'upoe' means that a port is powered in IEEE 802.3at mode using spare pair and data pair simultaneously to deliver up to 60W power.
| ||||
| NagentPethMainPseObjects | 1.3.6.1.4.1.4413.1.1.15.1.2 | |||
| TagentPethMainPseTable | 1.3.6.1.4.1.4413.1.1.15.1.2.1 | NA | ||
table · not-accessible · current A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot. | ||||
| RagentPethMainPseEntry | 1.3.6.1.4.1.4413.1.1.15.1.2.1.1 | NA | ||
row · not-accessible · current A set of objects that display and control the Main power of a PSE.
| ||||
| CagentPethMainPseLegacy | 1.3.6.1.4.1.4413.1.1.15.1.2.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected. | ||||
| TagentPethPseTable | 1.3.6.1.4.1.4413.1.1.15.1.3 | NA | ||
table · not-accessible · current A table of per-unit information and configuration objects relating to the power configurtion for the entire pse unit. | ||||
| RagentPethPseEntry | 1.3.6.1.4.1.4413.1.1.15.1.3.1 | NA | ||
row · not-accessible · current A collection of objects providing additional power information and control parameters for the specified pse unit.
| ||||
| CagentPethPsePowerManagementMode | 1.3.6.1.4.1.4413.1.1.15.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Describes or controls the power management algorithm used by the pse to deliver power to the requesting PDsthat a pds. A value of dynamic(1) means that power consumption of each port is measured and calculated in real-time. A value of static(2) means that power allocated for each port depends on the type of power threshold configured on the port.
| ||||
| CagentPethPseCardModel | 1.3.6.1.4.1.4413.1.1.15.1.3.1.3 | DisplayString (SIZE (1..32)) | RO | |
column · DisplayString (SIZE (1..32)) · read-only · current Displays the PoE daughther card model at PSE side. | ||||
| CagentPethPseCardHost | 1.3.6.1.4.1.4413.1.1.15.1.3.1.4 | DisplayString (SIZE (1..32)) | RO | |
column · DisplayString (SIZE (1..32)) · read-only · current Displays the board which hosts the PoE daughther card at PSE side. | ||||
| CagentPethPseCardStatus | 1.3.6.1.4.1.4413.1.1.15.1.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Displays running status of the PoE daughther card at PSE side. The value absent-or-failed(0) means that the card is either not present or some error has occurred. The value running(1) means that card is present and working fine.
| ||||