NETGEAR-MGMT-SECURITY-MIB
Broadcom LimitedThe Netgear Private MIB for FastPath Security
snmptranslate -m NETGEAR-MGMT-SECURITY-MIB -Tpsnmpwalk -v2c -c <community> -m NETGEAR-MGMT-SECURITY-MIB <host> 1.3.6.1.4.1.4413.1.1.11Imports
| QUANTA-LB6M-REF-MIB | lb6m |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfastPathMgmtSecurity | 1.3.6.1.4.1.4413.1.1.11 | |||
identity The Netgear Private MIB for FastPath Security | ||||
| NagentSSLConfigGroup | 1.3.6.1.4.1.4413.1.1.11.1 | |||
| SagentSSLAdminMode | 1.3.6.1.4.1.4413.1.1.11.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures whether the SSL service is enabled on this switch. The default value is disable(2).
| ||||
| SagentSSLSecurePort | 1.3.6.1.4.1.4413.1.1.11.1.2 | Integer32 (443 | 1025..65535) | RW | |
scalar · Integer32 (443 | 1025..65535) · read-write · current Configures the port the SSL service will respond on. The default value is 443. | ||||
| SagentSSLProtocolLevel | 1.3.6.1.4.1.4413.1.1.11.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
| ||||
| SagentSSLMaxSessions | 1.3.6.1.4.1.4413.1.1.11.1.4 | Integer32 (0..16) | RW | |
scalar · Integer32 (0..16) · read-write · current Configures the maximum number of allowable SSL sessions. The default value is 16. | ||||
| SagentSSLHardTimeout | 1.3.6.1.4.1.4413.1.1.11.1.5 | Integer32 (1..168) | RW | |
scalar · Integer32 (1..168) · read-write · current Configures the hard timeout for SSL sessions in hours. The default value is 24 hours. | ||||
| SagentSSLSoftTimeout | 1.3.6.1.4.1.4413.1.1.11.1.6 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current Configures the soft (activity) timeout for SSL sessions in minutes. The default value is 5 minutes. | ||||
| SagentSSLCertificatePresent | 1.3.6.1.4.1.4413.1.1.11.1.7 | TruthValue | RO | |
scalar · TruthValue · read-only · current Boolean value indicating whether SSL certificate files exist on the device. | ||||
| SagentSSLCertificateControl | 1.3.6.1.4.1.4413.1.1.11.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls certificate generation and deletion. Always returns noop(1).
| ||||
| SagentSSLCertificateGenerationStatus | 1.3.6.1.4.1.4413.1.1.11.1.9 | TruthValue | RO | |
scalar · TruthValue · read-only · current Indicates whether certificate files are currently being generated. | ||||
| NagentSSHConfigGroup | 1.3.6.1.4.1.4413.1.1.11.2 | |||
| SagentSSHAdminMode | 1.3.6.1.4.1.4413.1.1.11.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures whether the SSH service is enabled on this switch. The default value is disable(2).
| ||||
| SagentSSHProtocolLevel | 1.3.6.1.4.1.4413.1.1.11.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
| ||||
| SagentSSHSessionsCount | 1.3.6.1.4.1.4413.1.1.11.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current number of active SSH sessions on this switch. | ||||
| SagentSSHMaxSessionsCount | 1.3.6.1.4.1.4413.1.1.11.2.4 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current Max number of SSH sessions permitted on this switch. | ||||
| SagentSSHSessionTimeout | 1.3.6.1.4.1.4413.1.1.11.2.5 | Integer32 (1..160) | RW | |
scalar · Integer32 (1..160) · read-write · current ssh idle timeout value for this switch im minutes. | ||||
| SagentSSHKeysPresent | 1.3.6.1.4.1.4413.1.1.11.2.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates what key files are present on the device, if any.
| ||||
| SagentSSHKeyGenerationStatus | 1.3.6.1.4.1.4413.1.1.11.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates what key files are currently being generated, if any.
| ||||
| SagentSSHRSAKeyControl | 1.3.6.1.4.1.4413.1.1.11.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls RSA key generation and deletion. Always returns noop(1).
| ||||
| SagentSSHDSAKeyControl | 1.3.6.1.4.1.4413.1.1.11.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls DSA key generation and deletion. Always returns noop(1).
| ||||
| SagentSSHMgmtPortNum | 1.3.6.1.4.1.4413.1.1.11.2.10 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Get/Set the TCP port number that the SSH server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 22. Note that existing SSH login sessions are not affected by a change in value of this object, although establishment of any new SSH sessions must use the new port number. | ||||