NETGEAR-INVENTORY-MIB
Broadcom LimitedThis MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
snmptranslate -m NETGEAR-INVENTORY-MIB -Tpsnmpwalk -v2c -c <community> -m NETGEAR-INVENTORY-MIB <host> 1.3.6.1.4.1.4413.1.1.13Imports
| QUANTA-LB6M-REF-MIB | lb6m |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfastPathInventory | 1.3.6.1.4.1.4413.1.1.13 | |||
identity This MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards. | ||||
| NagentInventoryTraps | 1.3.6.1.4.1.4413.1.1.13.0 | |||
| !agentInventoryCardMismatch | 1.3.6.1.4.1.4413.1.1.13.0.1 | |||
notification · current Sent when a card is inserted which is a different type than what the slot was configured for. | ||||
| !agentInventoryCardUnsupported | 1.3.6.1.4.1.4413.1.1.13.0.2 | |||
notification · current Sent when a card is inserted which is of a type that is not supported by the slot. | ||||
| !agentInventorySFSStart | 1.3.6.1.4.1.4413.1.1.13.0.5 | |||
notification · current Sent when firmware synchronization operation is started on a chassis member. | ||||
| !agentInventorySFSComplete | 1.3.6.1.4.1.4413.1.1.13.0.6 | |||
notification · current Sent when firmware synchronization operation is complete on a chassis member. | ||||
| !agentInventorySFSFail | 1.3.6.1.4.1.4413.1.1.13.0.7 | |||
notification · current Sent when firmware synchronization operation failed for a chassis member. | ||||
| !agentInventoryBackplanePortLinkUp | 1.3.6.1.4.1.4413.1.1.13.0.8 | |||
notification · current Sent when a backplane port is connected to annother chassis member. | ||||
| !agentInventoryBackplanePortLinkDown | 1.3.6.1.4.1.4413.1.1.13.0.9 | |||
notification · current Sent when a backplane port is disconnected from a chassis member. | ||||
| NagentInventoryUnitGroup | 1.3.6.1.4.1.4413.1.1.13.2 | |||
| TagentInventorySupportedUnitTable | 1.3.6.1.4.1.4413.1.1.13.2.1 | NA | ||
table · not-accessible · current TODO | ||||
| RagentInventorySupportedUnitEntry | 1.3.6.1.4.1.4413.1.1.13.2.1.1 | NA | ||
| CagentInventorySupportedUnitIndex | 1.3.6.1.4.1.4413.1.1.13.2.1.1.1 | Unsigned32 (1..100) | NA | |
column · Unsigned32 (1..100) · not-accessible · current The unit identifier associated with the supported unit. | ||||
| CagentInventorySupportedUnitModelIdentifier | 1.3.6.1.4.1.4413.1.1.13.2.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The model identifier for the supported unit. | ||||
| CagentInventorySupportedUnitDescription | 1.3.6.1.4.1.4413.1.1.13.2.1.1.5 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current The description of the supported unit. | ||||
| CagentInventorySupportedUnitExpectedCodeVer | 1.3.6.1.4.1.4413.1.1.13.2.1.1.6 | DisplayString | RO | obsolete |
column · DisplayString · read-only · obsolete The expected code version. | ||||
| TagentInventoryUnitTable | 1.3.6.1.4.1.4413.1.1.13.2.2 | NA | ||
table · not-accessible · current A table of Per-Unit configuration objects. | ||||
| RagentInventoryUnitEntry | 1.3.6.1.4.1.4413.1.1.13.2.2.1 | NA | ||
row · not-accessible · current Each Instance corresponds with a different unit managed by this agent. | ||||
| CagentInventoryUnitNumber | 1.3.6.1.4.1.4413.1.1.13.2.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The unit number associated with this unit. | ||||
| CagentInventoryUnitAssignNumber | 1.3.6.1.4.1.4413.1.1.13.2.2.1.2 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Allows setting the unit number associated with this unit. This number must be less than the value returned by agentInventoryChassisMaxUnitNumber. Setting this object to a non-zero value will initate unit renumbering. The switch will be reset to perform unit renumbering and the configuration of switch interfaces will be cleared. If the unit being renumbered is the manager of the chassis, then all the switches in the chassis will be reset to perform manager unit renumbering and the configuration of Manager switch interfaces will be cleared. | ||||
| CagentInventoryUnitType | 1.3.6.1.4.1.4413.1.1.13.2.2.1.3 | AgentInventoryUnitType | RO | |
column · AgentInventoryUnitType · read-only · current The Unit Type identifier for this unit. | ||||
| CagentInventoryUnitSupportedUnitIndex | 1.3.6.1.4.1.4413.1.1.13.2.2.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with. | ||||
| CagentInventoryUnitMgmtAdmin | 1.3.6.1.4.1.4413.1.1.13.2.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates whether the unit is a management unit, a chassis unit, or has been configured to be a management unit. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified chassis unit. Object values chassisUnit(2) and mgmtUnassigned(3) cannot be set.
| ||||
| CagentInventoryUnitHWMgmtPref | 1.3.6.1.4.1.4413.1.1.13.2.2.1.7 | AgentInventoryUnitPreference | RO | obsolete |
column · AgentInventoryUnitPreference · read-only · obsolete Indicates the default preference assigned to the unit. | ||||
| CagentInventoryUnitHWMgmtPrefValue | 1.3.6.1.4.1.4413.1.1.13.2.2.1.8 | Unsigned32 (0 | 1..15) | RO | obsolete |
column · Unsigned32 (0 | 1..15) · read-only · obsolete Indicates the default preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. | ||||
| CagentInventoryUnitAdminMgmtPref | 1.3.6.1.4.1.4413.1.1.13.2.2.1.9 | AgentInventoryUnitPreference | RC | obsolete |
column · AgentInventoryUnitPreference · read-create · obsolete Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0. | ||||
| CagentInventoryUnitAdminMgmtPrefValue | 1.3.6.1.4.1.4413.1.1.13.2.2.1.10 | Unsigned32 (0 | 1..15) | RC | obsolete |
column · Unsigned32 (0 | 1..15) · read-create · obsolete Indicates the configured preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of agentInventoryUnitHWMgmtPref if assigned. | ||||
| CagentInventoryUnitStatus | 1.3.6.1.4.1.4413.1.1.13.2.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The unit status of this unit.
| ||||
| CagentInventoryUnitDetectedCodeVer | 1.3.6.1.4.1.4413.1.1.13.2.2.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The version of code running on this unit. If the unit is not detected then the code version is an empty string. | ||||
| CagentInventoryUnitDetectedCodeInFlashVer | 1.3.6.1.4.1.4413.1.1.13.2.2.1.13 | DisplayString | RO | |
column · DisplayString · read-only · current The version of code that is currently stored in FLASH memory on the unit. This code will execute after the unit is reset. If the unit is not detected then this object will return an empty string. | ||||
| CagentInventoryUnitUpTime | 1.3.6.1.4.1.4413.1.1.13.2.2.1.14 | TimeTicks | RO | |
column · TimeTicks · read-only · current The system up time of the unit. | ||||
| CagentInventoryUnitDescription | 1.3.6.1.4.1.4413.1.1.13.2.2.1.15 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current The description of the unit. | ||||
| CagentInventoryUnitReplicateSTK | 1.3.6.1.4.1.4413.1.1.13.2.2.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Initiates the specified STK file copy from management unit to this unit.
| ||||
| CagentInventoryUnitReload | 1.3.6.1.4.1.4413.1.1.13.2.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Reload a specific unit in the chassis.
| ||||
| CagentInventoryUnitRowStatus | 1.3.6.1.4.1.4413.1.1.13.2.2.1.18 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type of of unit to pre-configure. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance. | ||||
| CagentInventoryUnitSerialNumber | 1.3.6.1.4.1.4413.1.1.13.2.2.1.19 | DisplayString | RO | |
column · DisplayString · read-only · current The Serial Number of the unit. | ||||
| CagentInventoryUnitImage1Version | 1.3.6.1.4.1.4413.1.1.13.2.2.1.20 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current Code version for Image1. | ||||
| CagentInventoryUnitImage2Version | 1.3.6.1.4.1.4413.1.1.13.2.2.1.21 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current Code version for Image2. | ||||
| CagentInventoryUnitSTKname | 1.3.6.1.4.1.4413.1.1.13.2.2.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current STK file to be used for copy/delete/activate operatiosn.
| ||||
| CagentInventoryUnitActivateSTK | 1.3.6.1.4.1.4413.1.1.13.2.2.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current Activates the specified STK file on this unit.
| ||||
| CagentInventoryUnitDeleteSTK | 1.3.6.1.4.1.4413.1.1.13.2.2.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current Deletes the specified STK file on this unit.
| ||||
| CagentInventoryUnitReplicateSTKStatus | 1.3.6.1.4.1.4413.1.1.13.2.2.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the current status of an STK copy from the management unit to another management capable unit in the chassis.
| ||||
| CagentInventoryUnitStandby | 1.3.6.1.4.1.4413.1.1.13.2.2.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current Configures the standby status of this unit. The Management unit may not be configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear standby configuration. A unit that is standby_opr(2) may NOT be set to unassigned(1).
| ||||
| CagentInventoryUnitSFSTransferStatus | 1.3.6.1.4.1.4413.1.1.13.2.2.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current Status parameter to indicate firmware synchronization operation status for a particular unit. If SFS transfer is in progress for a particular unit status will be inProgress(2),otherwise status will be noAction(1).
| ||||
| CagentInventoryUnitSFSLastAttemptStatus | 1.3.6.1.4.1.4413.1.1.13.2.2.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current Status parameter to indicate whether the last synchronization attempt succeeded or failed.If SFS is initated for a particular unit and if it completes successfully this object will return success(2),if SFS operation failed lasttime for this unit,this object will return failure(3).if SFS did not initiate for this unit,this object will retunrn none(1). If activation of the image failed because the underlying bootcode version is older than the minimum boot code version specified in the image, this object returns min-bootcode-version-not-met(4)
| ||||
| NagentInventorySlotGroup | 1.3.6.1.4.1.4413.1.1.13.3 | |||
| TagentInventorySlotTable | 1.3.6.1.4.1.4413.1.1.13.3.1 | NA | ||
table · not-accessible · current TODO | ||||
| RagentInventorySlotEntry | 1.3.6.1.4.1.4413.1.1.13.3.1.1 | NA | ||
| CagentInventorySlotNumber | 1.3.6.1.4.1.4413.1.1.13.3.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An incrimental index of the slot in this unit. | ||||
| CagentInventorySlotStatus | 1.3.6.1.4.1.4413.1.1.13.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the current status of the slot.
| ||||
| CagentInventorySlotPowerMode | 1.3.6.1.4.1.4413.1.1.13.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether a card in this slot will be powered on.
| ||||
| CagentInventorySlotAdminMode | 1.3.6.1.4.1.4413.1.1.13.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether this card is administratively enabled or disabled.
| ||||
| CagentInventorySlotInsertedCardType | 1.3.6.1.4.1.4413.1.1.13.3.1.1.6 | AgentInventoryCardType | RO | |
column · AgentInventoryCardType · read-only · current Indicates the inserted card type. Will return 0 if the slot is not full. | ||||
| CagentInventorySlotConfiguredCardType | 1.3.6.1.4.1.4413.1.1.13.3.1.1.7 | AgentInventoryCardType | RW | |
column · AgentInventoryCardType · read-write · current Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards. | ||||
| CagentInventorySlotCapabilities | 1.3.6.1.4.1.4413.1.1.13.3.1.1.8 | Bits | RO | |
column · Bits · read-only · current Indicates the different capabilities this slot has.
pluggable(0) - This slot can contain pluggable cards.
power-down(1) - Power to this slot can be controlled through the object
agentInventorySlotPowerMode
| ||||
| NagentInventoryCardGroup | 1.3.6.1.4.1.4413.1.1.13.4 | |||
| TagentInventoryCardTypeTable | 1.3.6.1.4.1.4413.1.1.13.4.1 | NA | ||
table · not-accessible · current Contains information for all supported Card Types in the system. | ||||
| RagentInventoryCardTypeEntry | 1.3.6.1.4.1.4413.1.1.13.4.1.1 | NA | ||
row · not-accessible · current Contains information related to a specific Card Type. | ||||
| CagentInventoryCardIndex | 1.3.6.1.4.1.4413.1.1.13.4.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An arbitrary index used to identify cards in the table. | ||||
| CagentInventoryCardType | 1.3.6.1.4.1.4413.1.1.13.4.1.1.2 | AgentInventoryCardType | RO | |
column · AgentInventoryCardType · read-only · current The Card Type associated with this instance. | ||||
| CagentInventoryCardModelIdentifier | 1.3.6.1.4.1.4413.1.1.13.4.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The model identifier for the supported Card Type. | ||||
| CagentInventoryCardDescription | 1.3.6.1.4.1.4413.1.1.13.4.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The card description for the supported Card Type. | ||||
| NagentInventoryComponentGroup | 1.3.6.1.4.1.4413.1.1.13.5 | |||
| TagentInventoryComponentTable | 1.3.6.1.4.1.4413.1.1.13.5.1 | NA | ||
table · not-accessible · current Contains information for all supported Components in the system. | ||||
| RagentInventoryComponentEntry | 1.3.6.1.4.1.4413.1.1.13.5.1.1 | NA | ||
row · not-accessible · current Contains information related to a specific Components. | ||||
| CagentInventoryComponentIndex | 1.3.6.1.4.1.4413.1.1.13.5.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An arbitrary index used to reference components in the table. | ||||
| CagentInventoryComponentMnemonic | 1.3.6.1.4.1.4413.1.1.13.5.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The abreviated name of this component. | ||||
| CagentInventoryComponentName | 1.3.6.1.4.1.4413.1.1.13.5.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the component for this instance. | ||||
| NfastPathInventoryConformance | 1.3.6.1.4.1.4413.1.1.13.6 | |||
| NfastPathInventoryCompliances | 1.3.6.1.4.1.4413.1.1.13.6.1 | |||
| MfastPathInventoryCompliance | 1.3.6.1.4.1.4413.1.1.13.6.1.1 | obsolete | ||
compliance · obsolete The compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB. | ||||
| MfastPathInventoryCompliance2 | 1.3.6.1.4.1.4413.1.1.13.6.1.2 | |||
compliance · current The compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB. | ||||
| NfastPathInventoryGroups | 1.3.6.1.4.1.4413.1.1.13.6.2 | |||
| GfastPathInventorySupportedUnitGroup | 1.3.6.1.4.1.4413.1.1.13.6.2.1 | |||
group · current The collection of objects which are used to represent multiple units in the chassis. | ||||
| GfastPathInventoryUnitGroup | 1.3.6.1.4.1.4413.1.1.13.6.2.2 | |||
group · current The collection of objects which are used to represent multiple units in the chassis.
| ||||
| GfastPathInventorySlotGroup | 1.3.6.1.4.1.4413.1.1.13.6.2.3 | |||
group · current The collection of objects which are used to represent slots in the each unit managed by this agent. | ||||
| GfastPathInventoryCardGroup | 1.3.6.1.4.1.4413.1.1.13.6.2.4 | |||
group · current The collection of objects which are used to represent the card types this system can manage. | ||||
| GfastPathInventoryNotificationsGroup | 1.3.6.1.4.1.4413.1.1.13.6.2.5 | |||
group · current The collection of notifications used to indicate problems associated with the insertion of cards. | ||||
| NagentInventorySFSGroup | 1.3.6.1.4.1.4413.1.1.13.8 | |||
| SagentInventorySFS | 1.3.6.1.4.1.4413.1.1.13.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls whether the firmware synchronization is enabled or disabled.
| ||||
| SagentInventorySFSAllowDowngrade | 1.3.6.1.4.1.4413.1.1.13.8.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls whether downgrading the image on the chassis member is allowed or not if the firmware version of manager is older to firmware version of chassis member
| ||||
| SagentInventorySFSTrap | 1.3.6.1.4.1.4413.1.1.13.8.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls sending of traps during firmware synchronization operation
| ||||
| SagentInventoryChassisUnitNumber | 1.3.6.1.4.1.4413.1.1.13.8.5 | Unsigned32 | NA | |
scalar · Unsigned32 · not-accessible · current The unit number associated with chassis unit . | ||||
| NagentInventoryChassisGroup | 1.3.6.1.4.1.4413.1.1.13.10 | |||
| SagentInventoryChassisReplicateSTK | 1.3.6.1.4.1.4413.1.1.13.10.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Initiates STK copy from management unit to all other management capable units in the chassis.
| ||||
| SagentInventoryChassisReload | 1.3.6.1.4.1.4413.1.1.13.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Initiates chassis reload.
| ||||
| SagentInventoryChassisMaxUnitNumber | 1.3.6.1.4.1.4413.1.1.13.10.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Indicates the maximum allowed Unit Number configurable on the chassis. | ||||
| SagentInventoryChassisReplicateSTKStatus | 1.3.6.1.4.1.4413.1.1.13.10.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current status of an STK copy from management unit to all other management capable units in the chassis.
| ||||
| SagentInventoryChassisSTKname | 1.3.6.1.4.1.4413.1.1.13.10.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current STK file on management unit for copy/activate/delete operations to all units in the chassis unconfigured(1) - indicates a default state and can not be set.
| ||||
| SagentInventoryChassisActivateSTK | 1.3.6.1.4.1.4413.1.1.13.10.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Activates the specified STK file on all units on the chassis.
| ||||
| SagentInventoryChassisDeleteSTK | 1.3.6.1.4.1.4413.1.1.13.10.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Deletes the specified STK file from all units on the chassis.
| ||||
| NagentInventoryBackplanePortGroup | 1.3.6.1.4.1.4413.1.1.13.11 | |||
| TagentInventoryBackplanePortTable | 1.3.6.1.4.1.4413.1.1.13.11.2 | NA | ||
table · not-accessible · current Contains information for all backplane ports present in the system. | ||||
| RagentInventoryBackplanePortEntry | 1.3.6.1.4.1.4413.1.1.13.11.2.1 | NA | ||
row · not-accessible · current Contains information related to a specific backplane Port. | ||||
| CagentInventoryBackplanePortIndex | 1.3.6.1.4.1.4413.1.1.13.11.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An arbitrary index used to reference backplane ports in the table. | ||||
| CagentInventoryBackplanePortUnit | 1.3.6.1.4.1.4413.1.1.13.11.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Unit Index this backplane port is physically located on. | ||||
| CagentInventoryBackplanePortTag | 1.3.6.1.4.1.4413.1.1.13.11.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the backplane port for this instance. | ||||
| CagentInventoryBackplanePortLinkStatus | 1.3.6.1.4.1.4413.1.1.13.11.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Link status of the backplane port.
| ||||
| CagentInventoryBackplanePortLinkSpeed | 1.3.6.1.4.1.4413.1.1.13.11.2.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Speed of the backplane port measured in Gb/s. | ||||
| CagentInventoryBackplanePortDataRate | 1.3.6.1.4.1.4413.1.1.13.11.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Approximate data rate on the backplane port. Measured in Gb/s. | ||||
| CagentInventoryBackplanePortErrorRate | 1.3.6.1.4.1.4413.1.1.13.11.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Approximate error rate on the backplane port. Measured in errors per second. | ||||
| CagentInventoryBackplanePortTotalErrors | 1.3.6.1.4.1.4413.1.1.13.11.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Number of errors since boot. The counter may wrap. | ||||
| NagentInventoryChassisBackplaneGroup | 1.3.6.1.4.1.4413.1.1.13.12 | |||
| SagentInventoryChassisBackplaneModelID | 1.3.6.1.4.1.4413.1.1.13.12.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current Chassis Model ID. | ||||
| SagentInventoryChassisBackplaneFpgaVersion | 1.3.6.1.4.1.4413.1.1.13.12.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Chassis FPGA version. | ||||
| SagentInventoryChassisBackplaneSerialNumber | 1.3.6.1.4.1.4413.1.1.13.12.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Chassis serial number. | ||||
Textual conventions
AgentInventoryCardTypeUnsigned32Display hint:
xThe Card Type value for a given card, displayed in hexadecimal.
AgentInventoryUnitPreferenceINTEGERassigned(2)disabled(0)unsassigned(1)Indicates the preference the unit has for being the management unit in the chassis. If the value is 0, it indicates the unit is disabled for management.
AgentInventoryUnitTypeUnsigned32Display hint:
xThe Unit Type value for a given unit, displayed in hexadecimal.
Traps / Notifications
- agentInventoryBackplanePortLinkDown
1.3.6.1.4.1.4413.1.1.13.0.9 - agentInventoryBackplanePortLinkUp
1.3.6.1.4.1.4413.1.1.13.0.8 - agentInventoryCardMismatch
1.3.6.1.4.1.4413.1.1.13.0.1 - agentInventoryCardUnsupported
1.3.6.1.4.1.4413.1.1.13.0.2 - agentInventorySFSComplete
1.3.6.1.4.1.4413.1.1.13.0.6 - agentInventorySFSFail
1.3.6.1.4.1.4413.1.1.13.0.7 - agentInventorySFSStart
1.3.6.1.4.1.4413.1.1.13.0.5