PT3080-MIB
ProTelevision Technologies A/SThis is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
snmptranslate -m PT3080-MIB -Tpsnmpwalk -v2c -c <community> -m PT3080-MIB <host> 1.3.6.1.4.1.18086.3080Imports
| PT-MIB | pt |
|---|---|
| SNMPv2-CONF | AGENT-CAPABILITIES, MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ipt3080 | 1.3.6.1.4.1.18086.3080 | ||||||||||||
identity This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. | |||||||||||||
| Npt3080System | 1.3.6.1.4.1.18086.3080.1 | ||||||||||||
| Spt3080SystemInstrumentKU | 1.3.6.1.4.1.18086.3080.1.1 | DisplayString | RO | 3303302 | |||||||||
scalar · DisplayString · read-only · current The instrument serial number. Example values from LibreNMS test devices
| |||||||||||||
| Spt3080SystemInstrumentType | 1.3.6.1.4.1.18086.3080.1.2 | DisplayString | RO | PT3080 | |||||||||
scalar · DisplayString · read-only · current The product type designation. Example values from LibreNMS test devices
| |||||||||||||
| Spt3080SystemInstrumentSWRev | 1.3.6.1.4.1.18086.3080.1.3 | DisplayString | RO | SWPTTDVBTT2_P3_1_02_157 build 1441109757 | |||||||||
scalar · DisplayString · read-only · current The instrument Software Revision currently running. Example values from LibreNMS test devices
| |||||||||||||
| Spt3080SystemInstrumentBootLoaderRev | 1.3.6.1.4.1.18086.3080.1.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument Bootloader Software Revision. | |||||||||||||
| Spt3080SystemInstrumentKernelRev | 1.3.6.1.4.1.18086.3080.1.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument O/S Kernel Version. | |||||||||||||
| Spt3080SystemInstrumentOptions | 1.3.6.1.4.1.18086.3080.1.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The options installed on this instrument. | |||||||||||||
| Spt3080SystemInstrumentFW1Rev | 1.3.6.1.4.1.18086.3080.1.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW1 revision | |||||||||||||
| Spt3080SystemInstrumentFW1RevBL | 1.3.6.1.4.1.18086.3080.1.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW1 BL revision | |||||||||||||
| Spt3080SystemInstrumentFW2Rev | 1.3.6.1.4.1.18086.3080.1.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW2 revision | |||||||||||||
| Spt3080SystemInstrumentFW2RevBL | 1.3.6.1.4.1.18086.3080.1.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW2 BL revision | |||||||||||||
| Spt3080SystemInstrumentFW3Rev | 1.3.6.1.4.1.18086.3080.1.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW3 revision | |||||||||||||
| Spt3080SystemInstrumentFW4Rev | 1.3.6.1.4.1.18086.3080.1.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument FW4 revision | |||||||||||||
| Spt3080SystemInstrumentPCBRev | 1.3.6.1.4.1.18086.3080.1.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument PCB revision | |||||||||||||
| Spt3080SystemInstrumentCalibrationRev | 1.3.6.1.4.1.18086.3080.1.14 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument Calibration revision | |||||||||||||
| Spt3080SystemInstrumentCalibrationDate | 1.3.6.1.4.1.18086.3080.1.15 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The instrument Calibration date | |||||||||||||
| Spt3080SystemReboot | 1.3.6.1.4.1.18086.3080.1.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Force a reboot of the device on the designated image now.
| |||||||||||||
| Spt3080SystemRebootDefaultConfig | 1.3.6.1.4.1.18086.3080.1.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Restore all parameters to factory default and reboot the device on the same image.
| |||||||||||||
| Spt3080SystemDateTimeSync | 1.3.6.1.4.1.18086.3080.1.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual.
| |||||||||||||
| Spt3080SystemTimezone | 1.3.6.1.4.1.18086.3080.1.21 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The Time Zone used for displaying Data and Time. | |||||||||||||
| Spt3080SystemDateTime | 1.3.6.1.4.1.18086.3080.1.22 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS. | |||||||||||||
| Spt3080SystemCurrentImage | 1.3.6.1.4.1.18086.3080.1.23 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The flash Image the device is currently booted from. | |||||||||||||
| Spt3080SystemImage0Version | 1.3.6.1.4.1.18086.3080.1.24 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The image 0 version string. | |||||||||||||
| Spt3080SystemImage0InstalledDate | 1.3.6.1.4.1.18086.3080.1.25 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The date and time image 0 was installed. | |||||||||||||
| Spt3080SystemImage1version | 1.3.6.1.4.1.18086.3080.1.26 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The image 1 version string. | |||||||||||||
| Spt3080SystemImage1InstalledDate | 1.3.6.1.4.1.18086.3080.1.27 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current The date and time image 0 was installed. | |||||||||||||
| Spt3080SystemServiceLED | 1.3.6.1.4.1.18086.3080.1.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control the Service LED on frontpanel.
| |||||||||||||
| Spt3080SystemType | 1.3.6.1.4.1.18086.3080.1.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The system type to start in on next reboot.
| |||||||||||||
| Spt3080SystemDateTimeSyncActual | 1.3.6.1.4.1.18086.3080.1.31 | INTEGER | RO | gps(2) | |||||||||
scalar · INTEGER · read-only · current The actual method used to synchronize system RTC.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080SystemModulationStandard | 1.3.6.1.4.1.18086.3080.1.32 | INTEGER | RW | dvbt(0) | |||||||||
scalar · INTEGER · read-write · current The Modulation Standard to start in on next reboot.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080SystemLanguage | 1.3.6.1.4.1.18086.3080.1.33 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls which language is used on web and facia. Change requires reboot.
| |||||||||||||
| Spt3080SystemOperationOnTime | 1.3.6.1.4.1.18086.3080.1.34 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of seconds this unit has been turned on since production.
| |||||||||||||
| Spt3080SystemOperationOnAirTime | 1.3.6.1.4.1.18086.3080.1.35 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of seconds this unit has been unmuted since production.
| |||||||||||||
| Spt3080SystemOperationNumberOfBoots | 1.3.6.1.4.1.18086.3080.1.36 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of times this unit has been booted since last factory default restore. | |||||||||||||
| Spt3080SystemBackplaneid | 1.3.6.1.4.1.18086.3080.1.40 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current ID of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneIdRaw | 1.3.6.1.4.1.18086.3080.1.41 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Raw ID of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneIdPcb | 1.3.6.1.4.1.18086.3080.1.42 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PCB version of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneIdCableOptions | 1.3.6.1.4.1.18086.3080.1.43 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Cable options of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneIdMAnuf | 1.3.6.1.4.1.18086.3080.1.44 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Manufacture ID of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneCalibrationDate | 1.3.6.1.4.1.18086.3080.1.45 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Calibration date of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneCalibrationSw | 1.3.6.1.4.1.18086.3080.1.46 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Calibration SW version of the backplane the device is plugged into | |||||||||||||
| Spt3080SystemBackplaneIdPartlist | 1.3.6.1.4.1.18086.3080.1.47 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Partlist version of the backplane the device is plugged into | |||||||||||||
| Tpt3080SystemScheduledActionTable | 1.3.6.1.4.1.18086.3080.1.50 | NA | |||||||||||
table · not-accessible · current This table contains the scheduled actions | |||||||||||||
| Rpt3080SystemScheduledActionEntry | 1.3.6.1.4.1.18086.3080.1.50.1 | NA | |||||||||||
| Cpt3080SystemScheduledActionID | 1.3.6.1.4.1.18086.3080.1.50.1.1 | Integer32 (1..10) | NA | ||||||||||
column · Integer32 (1..10) · not-accessible · current Unique ID for this scheduled action entry | |||||||||||||
| Cpt3080SystemScheduledActionRecurrence | 1.3.6.1.4.1.18086.3080.1.50.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The interval at which this scheduled action entry will be executed
| |||||||||||||
| Cpt3080SystemScheduledActionHour | 1.3.6.1.4.1.18086.3080.1.50.1.3 | Integer32 (0..23) | RW | ||||||||||
column · Integer32 (0..23) · read-write · current The recurrence hour used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly. | |||||||||||||
| Cpt3080SystemScheduledActionMinute | 1.3.6.1.4.1.18086.3080.1.50.1.4 | Integer32 (0..59) | RW | ||||||||||
column · Integer32 (0..59) · read-write · current The recurrence minute used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly. | |||||||||||||
| Cpt3080SystemScheduledActionWeekday | 1.3.6.1.4.1.18086.3080.1.50.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The recurrence weekday used when pt3080SystemScheduledActionRecurrence is weekly.
| |||||||||||||
| Cpt3080SystemScheduledActionMonthDay | 1.3.6.1.4.1.18086.3080.1.50.1.6 | Integer32 (1..31) | RW | ||||||||||
column · Integer32 (1..31) · read-write · current The recurrence day of the monthe used when pt3080SystemScheduledActionRecurrence is monthly. | |||||||||||||
| Cpt3080SystemScheduledActionDate | 1.3.6.1.4.1.18086.3080.1.50.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The recurrence date used when pt3080SystemScheduledActionRecurrence is once. The format is dd/mm/yyyy. | |||||||||||||
| Cpt3080SystemScheduledActionRandomDelay | 1.3.6.1.4.1.18086.3080.1.50.1.8 | Integer32 (0..600) | RW | ||||||||||
column · Integer32 (0..600) · read-write · current An extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added.
| |||||||||||||
| Cpt3080SystemScheduledActionAction | 1.3.6.1.4.1.18086.3080.1.50.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The action for this entry is executed
| |||||||||||||
| Cpt3080SystemScheduledActionRepeaterMode | 1.3.6.1.4.1.18086.3080.1.50.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The new repeater mode to change to when pt3080SystemScheduledActionAction of type repeatermode is executed
| |||||||||||||
| Cpt3080SystemScheduledActionPresetNo | 1.3.6.1.4.1.18086.3080.1.50.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The preset to load when pt3080SystemScheduledActionAction of type preset is executed
| |||||||||||||
| Cpt3080SystemScheduledActionRebootImage | 1.3.6.1.4.1.18086.3080.1.50.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The image to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
| |||||||||||||
| Cpt3080SystemScheduledActionRebootSystemType | 1.3.6.1.4.1.18086.3080.1.50.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The system type to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
| |||||||||||||
| Cpt3080SystemScheduledActionMute | 1.3.6.1.4.1.18086.3080.1.50.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The mute mode to change into when pt3080SystemScheduledActionAction of type mute is executed
| |||||||||||||
| Cpt3080SystemScheduledActionSWUpgradeProtocol | 1.3.6.1.4.1.18086.3080.1.50.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The protocol to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
| |||||||||||||
| Cpt3080SystemScheduledActionSWUpgradeUsername | 1.3.6.1.4.1.18086.3080.1.50.1.16 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The username to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed | |||||||||||||
| Cpt3080SystemScheduledActionSWUpgradePassword | 1.3.6.1.4.1.18086.3080.1.50.1.17 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The password to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed | |||||||||||||
| Cpt3080SystemScheduledActionSWUpgradeImageServer | 1.3.6.1.4.1.18086.3080.1.50.1.18 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The server name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed | |||||||||||||
| Cpt3080SystemScheduledActionSWUpgradeImagePath | 1.3.6.1.4.1.18086.3080.1.50.1.19 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The image path name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed | |||||||||||||
| Npt3080Mode | 1.3.6.1.4.1.18086.3080.2 | ||||||||||||
| Spt3080ModeNetwork | 1.3.6.1.4.1.18086.3080.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Network mode multi-frequency-network or single-frequency-network
| |||||||||||||
| Spt3080ModeHierarchy | 1.3.6.1.4.1.18086.3080.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Hierarchy mode. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080Modeifft | 1.3.6.1.4.1.18086.3080.2.3 | INTEGER | RW | ifft-mode-8k(2) | |||||||||
scalar · INTEGER · read-write · current IFFT 2k, 4k or 8k mode. Cannot be set if pt3080ModeMipControl is on(1).
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeCodeRateHighPrio | 1.3.6.1.4.1.18086.3080.2.4 | INTEGER | RW | code-rate-3-4(2) | |||||||||
scalar · INTEGER · read-write · current High Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeCodeRateLowPrio | 1.3.6.1.4.1.18086.3080.2.5 | INTEGER | RW | code-rate-2-3(1) | |||||||||
scalar · INTEGER · read-write · current Low Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeConstellation | 1.3.6.1.4.1.18086.3080.2.6 | INTEGER | RW | qam64(2) | |||||||||
scalar · INTEGER · read-write · current If QPSK is selected and Hierarchical is <> NONE, then Hierarchical will be forced to NONE. Cannot be set if pt3080ModeMipControl is on(1).
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeGuardInterval | 1.3.6.1.4.1.18086.3080.2.7 | INTEGER | RW | guard-1-16(1) | |||||||||
scalar · INTEGER · read-write · current Guard Interval. Cannot be set if pt3080ModeMipControl is on(1).
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeCellID | 1.3.6.1.4.1.18086.3080.2.8 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current Sets the Cell ID value. Cannot be set if pt3080ModeMipControl is on(1). | |||||||||||||
| Spt3080ModeEnableCellID | 1.3.6.1.4.1.18086.3080.2.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables Cell ID in the TPS information. Cannot be set if pt3080ModeMipControl is on(1). Cannot be set to off(0) if pt3080ModeEnableDVBH is on(1)
| |||||||||||||
| Spt3080ModeDeepInterleaver | 1.3.6.1.4.1.18086.3080.2.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables Deep Interleaver. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080ModeEnableDVBH | 1.3.6.1.4.1.18086.3080.2.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables DVB-H mode
| |||||||||||||
| Spt3080ModeMpeFecLowPrio | 1.3.6.1.4.1.18086.3080.2.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables MPE Fec Low Priority. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080ModeMpeFecHighPrio | 1.3.6.1.4.1.18086.3080.2.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables MPE Fec High Priority. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080ModeTimeSlicingLowPrio | 1.3.6.1.4.1.18086.3080.2.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080ModeTimeSlicingHighPrio | 1.3.6.1.4.1.18086.3080.2.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
| |||||||||||||
| Spt3080ModeSfnDelayOffset | 1.3.6.1.4.1.18086.3080.2.16 | Integer32 (-9999999..9999999) | RW | ||||||||||
scalar · Integer32 (-9999999..9999999) · read-write · current SFN delay offset | |||||||||||||
| Spt3080ModeTxIdent | 1.3.6.1.4.1.18086.3080.2.17 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The transport stream control identifier | |||||||||||||
| Spt3080ModeMipControl | 1.3.6.1.4.1.18086.3080.2.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables transport stream control of modulator
| |||||||||||||
| Spt3080ModeMfnKeepNullPackets | 1.3.6.1.4.1.18086.3080.2.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables MFN mode keep null packets option
| |||||||||||||
| Spt3080ModeNetworkDelayHP | 1.3.6.1.4.1.18086.3080.2.20 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current Current network delay of HP TS
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080ModeNetworkDelayMinHP | 1.3.6.1.4.1.18086.3080.2.21 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Minimum network delay of HP TS seen since last reset
| |||||||||||||
| Spt3080ModeNetworkDelayMaxHP | 1.3.6.1.4.1.18086.3080.2.22 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Maximum network delay of HP TS seen since last reset
| |||||||||||||
| Spt3080ModeMaxNetworkDelayHP | 1.3.6.1.4.1.18086.3080.2.23 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Maximum allowed network delay, as received from MIP
| |||||||||||||
| Spt3080ModeNetworkDelayMarginHP | 1.3.6.1.4.1.18086.3080.2.24 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Difference between Actual Network Delay and Max. Allowed Network Delay
| |||||||||||||
| Spt3080ModeNetworkDelayLP | 1.3.6.1.4.1.18086.3080.2.25 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current network delay of LP TS
| |||||||||||||
| Spt3080ModeNetworkDelayMinLP | 1.3.6.1.4.1.18086.3080.2.26 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Minimum network delay of LP TS seen since last reset
| |||||||||||||
| Spt3080ModeNetworkDelayMaxLP | 1.3.6.1.4.1.18086.3080.2.27 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Maximum network delay of LP TS seen since last reset
| |||||||||||||
| Spt3080ModeMaxNetworkDelayLP | 1.3.6.1.4.1.18086.3080.2.28 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Maximum allowed network delay, as received from MIP
| |||||||||||||
| Spt3080ModeNetworkDelayMarginLP | 1.3.6.1.4.1.18086.3080.2.29 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Difference between Actual Network Delay and Max. Allowed Network Delay
| |||||||||||||
| Spt3080ModeNetworkDelayReset | 1.3.6.1.4.1.18086.3080.2.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reset network delay. Always reads back as noop(0)
| |||||||||||||
| Spt3080ModeDefaultMIPOutputPower | 1.3.6.1.4.1.18086.3080.2.31 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Default MIP value for Output Power Level. Cannot be set if pt3080ModeMipControlOutputPower is on(1)
| |||||||||||||
| Spt3080ModeDefaultMIPOutputTimeOffset | 1.3.6.1.4.1.18086.3080.2.32 | Integer32 (-9999999..9999999) | RW | ||||||||||
scalar · Integer32 (-9999999..9999999) · read-write · current Default MIP value for Output SFN Time Offset. Cannot be set if pt3080ModeMipControlOutputTimeOffset is on(1)
| |||||||||||||
| Spt3080ModeDefaultMIPOutputCellID | 1.3.6.1.4.1.18086.3080.2.33 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current Default MIP value for Output Cell ID. Cannot be set if pt3080ModeMipControlOutputCellId is on(1) | |||||||||||||
| Spt3080ModeDefaultMIPOutputFreqOffset | 1.3.6.1.4.1.18086.3080.2.34 | Integer32 (-8388608..8388607) | RW | ||||||||||
scalar · Integer32 (-8388608..8388607) · read-write · current Default MIP value for Output frequency Offset. Cannot be set if pt3080ModeMipControlOutputFreqOffset is on(1)
| |||||||||||||
| Spt3080ModeMIPMaxSFNDelay | 1.3.6.1.4.1.18086.3080.2.35 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The MIP value for SFN maximum delay
| |||||||||||||
| Spt3080ModeMipControlOutputPower | 1.3.6.1.4.1.18086.3080.2.36 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables transport stream control of ModeDefaultMIPOutputPower
| |||||||||||||
| Spt3080ModeMipControlOutputTimeOffset | 1.3.6.1.4.1.18086.3080.2.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables transport stream control of ModeDefaultMIPOutputTimeOffset
| |||||||||||||
| Spt3080ModeMipControlOutputCellId | 1.3.6.1.4.1.18086.3080.2.38 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables transport stream control of ModeDefaultMIPOutputCellId
| |||||||||||||
| Spt3080ModeMipControlOutputFreqOffset | 1.3.6.1.4.1.18086.3080.2.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables transport stream control of ModeDefaultMIPOutputFreqOffset
| |||||||||||||
| Spt3080ModeListenBroadcast | 1.3.6.1.4.1.18086.3080.2.40 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control wheter to react on broadcast tx id.
| |||||||||||||
| Npt3080Input | 1.3.6.1.4.1.18086.3080.3 | ||||||||||||
| Spt3080InputRefDirection | 1.3.6.1.4.1.18086.3080.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current monitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT]
| |||||||||||||
| Spt3080InputRefSource | 1.3.6.1.4.1.18086.3080.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of choice is GPS->EXT10MHz->INT. If the value EXT is chosen, the external clock is chosen as source If the value INT is chosen, the internal clock is chosen as source. If the value GPS is chosen, the GNSS 1PPS clock is chosen as source.
| |||||||||||||
| Spt3080InputRef10MhzImpedance | 1.3.6.1.4.1.18086.3080.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.
| |||||||||||||
| Spt3080InputRef1PPSImpedance | 1.3.6.1.4.1.18086.3080.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.
| |||||||||||||
| Spt3080InputRef1PPSTrigSlope | 1.3.6.1.4.1.18086.3080.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING.
| |||||||||||||
| Spt3080InputRef1PPSTrigLevel | 1.3.6.1.4.1.18086.3080.3.6 | Integer32 (10..16) | RW | ||||||||||
scalar · Integer32 (10..16) · read-write · current Defines the trigger level of the external 1PPS input reference clock
| |||||||||||||
| Spt3080InputRef10MhzHoldoverDelay | 1.3.6.1.4.1.18086.3080.3.7 | Integer32 (0..172800) | RW | ||||||||||
scalar · Integer32 (0..172800) · read-write · current Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance. | |||||||||||||
| Spt3080InputRef10MhzHoldoverForever | 1.3.6.1.4.1.18086.3080.3.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The holdover delay for input reference source 10MHz failure is forever
| |||||||||||||
| Spt3080InputRef1PPSHoldoverDelay | 1.3.6.1.4.1.18086.3080.3.9 | Integer32 (0..172800) | RW | ||||||||||
scalar · Integer32 (0..172800) · read-write · current Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance. | |||||||||||||
| Spt3080InputRef1PPSHoldoverForever | 1.3.6.1.4.1.18086.3080.3.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The holdover delay for input reference source 1 pps failure is forever
| |||||||||||||
| Spt3080InputRefStatus | 1.3.6.1.4.1.18086.3080.3.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current returns the current input reference synchronisation source.
| |||||||||||||
| Spt3080InputASITSPrimarySource | 1.3.6.1.4.1.18086.3080.3.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The TS-Primary input source connector selected
| |||||||||||||
| Spt3080InputASITSSecondarySource | 1.3.6.1.4.1.18086.3080.3.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The TS-Secondary input source connector selected
| |||||||||||||
| Spt3080InputASIAutoRoutingPolicy | 1.3.6.1.4.1.18086.3080.3.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The policy to use for TS auto routing
| |||||||||||||
| Spt3080InputASIAutoRoutingDelayHp2Lp | 1.3.6.1.4.1.18086.3080.3.15 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current The delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HP
| |||||||||||||
| Spt3080InputASIAutoRoutingDelayLp2Hp | 1.3.6.1.4.1.18086.3080.3.16 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current The delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LP
| |||||||||||||
| Spt3080InputASIHoldoverTimeout | 1.3.6.1.4.1.18086.3080.3.17 | Integer32 (0..3600) | RW | ||||||||||
scalar · Integer32 (0..3600) · read-write · current The time ASI Holdover will be active, if seamless ASI switching is not possible
| |||||||||||||
| Spt3080InputTSPrimaryMaxPATDelay | 1.3.6.1.4.1.18086.3080.3.18 | Integer32 (10..10000) | RW | ||||||||||
scalar · Integer32 (10..10000) · read-write · current The Max delay between the Program Association Table (PAT) on the incomming transport stream.
| |||||||||||||
| Spt3080InputTSPrimaryMaxPATDelayEnable | 1.3.6.1.4.1.18086.3080.3.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Max delay between PAT table updates has been exceeded.
| |||||||||||||
| Spt3080InputTSPrimaryExpectedTSID | 1.3.6.1.4.1.18086.3080.3.20 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TS-ID value expected on the incoming TS stream. | |||||||||||||
| Spt3080InputTSPrimaryExpectedTSIDEnable | 1.3.6.1.4.1.18086.3080.3.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the TS-ID is not the expected value.
| |||||||||||||
| Spt3080InputTSPrimaryExpectedNWID | 1.3.6.1.4.1.18086.3080.3.22 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The NW-ID value expected on the incoming TS stream. | |||||||||||||
| Spt3080InputTSPrimaryExpectedNWIDEnable | 1.3.6.1.4.1.18086.3080.3.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the NW-ID is not the expected value.
| |||||||||||||
| Spt3080InputTSPrimaryMaxStuffingrate | 1.3.6.1.4.1.18086.3080.3.24 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current The expected stuffing rate on the incoming TS stream.
| |||||||||||||
| Spt3080InputTSPrimaryMaxStuffingrateEnable | 1.3.6.1.4.1.18086.3080.3.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Stuffing rate is over the expected value.
| |||||||||||||
| Spt3080InputTSPrimaryMaxStsJitter | 1.3.6.1.4.1.18086.3080.3.26 | Integer32 (0..500) | RW | ||||||||||
scalar · Integer32 (0..500) · read-write · current The Max STS jitter on the TS-Primary
| |||||||||||||
| Spt3080InputTSSecondaryMaxPATDelay | 1.3.6.1.4.1.18086.3080.3.27 | Integer32 (10..10000) | RW | ||||||||||
scalar · Integer32 (10..10000) · read-write · current The Max delay between the Program Association Table (PAT) on the incomming transport stream.
| |||||||||||||
| Spt3080InputTSSecondaryMaxPATDelayEnable | 1.3.6.1.4.1.18086.3080.3.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Max delay between PAT table updates has been exceeded.
| |||||||||||||
| Spt3080InputTSSecondaryExpectedTSID | 1.3.6.1.4.1.18086.3080.3.29 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TS-ID value expected on the incoming TS stream. | |||||||||||||
| Spt3080InputTSSecondaryExpectedTSIDEnable | 1.3.6.1.4.1.18086.3080.3.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the TS-ID is not the expected value.
| |||||||||||||
| Spt3080InputTSSecondaryExpectedNWID | 1.3.6.1.4.1.18086.3080.3.31 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The NW-ID value expected on the incoming TS stream. | |||||||||||||
| Spt3080InputTSSecondaryExpectedNWIDEnable | 1.3.6.1.4.1.18086.3080.3.32 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the NW-ID is not the expected value.
| |||||||||||||
| Spt3080InputTSSecondaryMaxStuffingrate | 1.3.6.1.4.1.18086.3080.3.33 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current The expected stuffing rate on the incoming TS stream.
| |||||||||||||
| Spt3080InputTSSecondaryMaxStuffingrateEnable | 1.3.6.1.4.1.18086.3080.3.34 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Stuffing rate is over the expected value.
| |||||||||||||
| Spt3080InputTSSecondaryMaxStsJitter | 1.3.6.1.4.1.18086.3080.3.35 | Integer32 (0..500) | RW | ||||||||||
scalar · Integer32 (0..500) · read-write · current The Max STS jitter on the TS-Secondary
| |||||||||||||
| Spt3080InputTSPrimaryStatus | 1.3.6.1.4.1.18086.3080.3.36 | INTEGER | RO | available(0) | |||||||||
scalar · INTEGER · read-only · current The current state for TS-Primary. Unavailable means violation of alarms.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080InputTSSecondaryStatus | 1.3.6.1.4.1.18086.3080.3.37 | INTEGER | RO | unavailable(1) | |||||||||
scalar · INTEGER · read-only · current The current state for TS-Secondary. Unavailable means violation of alarms.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080InputTSHp | 1.3.6.1.4.1.18086.3080.3.38 | INTEGER | RO | tsoip-rx1(4) | |||||||||
scalar · INTEGER · read-only · current The input source currently On Air. (TS-HP)
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080InputTSLp | 1.3.6.1.4.1.18086.3080.3.39 | INTEGER | RO | tsoip-rx2(5) | |||||||||
scalar · INTEGER · read-only · current The input source currently used as backup. (TS-LP)
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080InputEffectiveAutoroutingPolicy | 1.3.6.1.4.1.18086.3080.3.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Reflects the effective ASI Autorouting Policy
| |||||||||||||
| Spt3080InputTSHpBitrate | 1.3.6.1.4.1.18086.3080.3.41 | Integer32 | RO | 22657 | |||||||||
scalar · Integer32 · read-only · current Current bitrate for On Air TS. (TS-HP)
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080InputTSHpPacketsBuffered | 1.3.6.1.4.1.18086.3080.3.42 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current number of packets buffered for On Air TS (TS-HP)
| |||||||||||||
| Spt3080InputTSHpPacketSize | 1.3.6.1.4.1.18086.3080.3.43 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current size of packets for On Air TS (TS-HP)
| |||||||||||||
| Spt3080InputTSHpStuffingrate | 1.3.6.1.4.1.18086.3080.3.44 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current NULL stuffing as a percentage of the current bitrate for On Air TS (TS-HP)
| |||||||||||||
| Spt3080InputTSHpTSID | 1.3.6.1.4.1.18086.3080.3.45 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Transport Stream ID for On Air TS. (TS-HP) | |||||||||||||
| Spt3080InputTSHpNWID | 1.3.6.1.4.1.18086.3080.3.46 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Network ID for On Air TS. (TS-HP) | |||||||||||||
| Spt3080InputTSLpBitrate | 1.3.6.1.4.1.18086.3080.3.47 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current bitrate for Backup TS. (TS-LP)
| |||||||||||||
| Spt3080InputTSLpPacketsBuffered | 1.3.6.1.4.1.18086.3080.3.48 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current number of packets buffered for Backup TS. (TS-LP)
| |||||||||||||
| Spt3080InputTSLpPacketSize | 1.3.6.1.4.1.18086.3080.3.49 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current size of packets for Backup TS. (TS-LP)
| |||||||||||||
| Spt3080InputTSLpStuffingrate | 1.3.6.1.4.1.18086.3080.3.50 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current NULL stuffing as a percentage of the current bitrate for Backup TS. (TS-LP)
| |||||||||||||
| Spt3080InputTSLpTSID | 1.3.6.1.4.1.18086.3080.3.51 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Transport Stream ID for Backup TS. (TS-LP) | |||||||||||||
| Spt3080InputTSLpNWID | 1.3.6.1.4.1.18086.3080.3.52 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Network ID for Backup TS. (TS-LP) | |||||||||||||
| Spt3080InputTSPrimaryStsJitter | 1.3.6.1.4.1.18086.3080.3.53 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current STS jitter on the TS-Primary.
| |||||||||||||
| Spt3080InputTSPrimaryStsJitterMax | 1.3.6.1.4.1.18086.3080.3.54 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The Maximum STS jitter value seen on the TS-Primary
| |||||||||||||
| Spt3080InputTSPrimaryStsJitterMin | 1.3.6.1.4.1.18086.3080.3.55 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The minimum STS jitter value seen on the TS-Primary
| |||||||||||||
| Spt3080InputTSPrimaryStsJitterReset | 1.3.6.1.4.1.18086.3080.3.56 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reset the pt3080InputTSPrimaryStsJitterMax and pt3080InputTSPrimaryStsJitterMin values
| |||||||||||||
| Spt3080InputTSSecondaryStsJitter | 1.3.6.1.4.1.18086.3080.3.57 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current STS jitter on the TS-Secondary
| |||||||||||||
| Spt3080InputTSSecondaryStsJitterMax | 1.3.6.1.4.1.18086.3080.3.58 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The Maximum STS jitter value seen on the TS-Secondary
| |||||||||||||
| Spt3080InputTSSecondaryStsJitterMin | 1.3.6.1.4.1.18086.3080.3.59 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The minimum STS jitter value seen on the TS-Secondary
| |||||||||||||
| Spt3080InputTSSecondaryStsJitterReset | 1.3.6.1.4.1.18086.3080.3.60 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reset the pt3080InputTSSecondaryStsJitterMax and pt3080InputTSSecondaryStsJitterMin values
| |||||||||||||
| Spt3080InputTSPrimaryMinDelaymargin | 1.3.6.1.4.1.18086.3080.3.64 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current The minimum delay margin of the incoming TS stream.
| |||||||||||||
| Spt3080InputTSPrimaryMinDelaymarginEnable | 1.3.6.1.4.1.18086.3080.3.65 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Minimum Delay margin is not according to the expected value.
| |||||||||||||
| Spt3080InputTSSecondaryMinDelaymargin | 1.3.6.1.4.1.18086.3080.3.66 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current The minimum delay margin of the incoming TS stream.
| |||||||||||||
| Spt3080InputTSSecondaryMinDelaymarginEnable | 1.3.6.1.4.1.18086.3080.3.67 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Minimum Delay margin is not according to the expected value.
| |||||||||||||
| Spt3080InputTSPrimaryMaxMissingmip | 1.3.6.1.4.1.18086.3080.3.68 | Integer32 (1..255) | RW | ||||||||||
scalar · Integer32 (1..255) · read-write · current The maximum seconds of missing mip information from the incoming TS stream.
| |||||||||||||
| Spt3080InputTSPrimaryMaxMissingmipEnable | 1.3.6.1.4.1.18086.3080.3.69 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Maximum missing mip is not according to the expected value.
| |||||||||||||
| Spt3080InputTSSecondaryMaxMissingmip | 1.3.6.1.4.1.18086.3080.3.73 | Integer32 (1..255) | RW | ||||||||||
scalar · Integer32 (1..255) · read-write · current The maximum seconds of missing mip information from the incoming TS stream.
| |||||||||||||
| Spt3080InputTSSecondaryMaxMissingmipEnable | 1.3.6.1.4.1.18086.3080.3.74 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables TS switching if the Maximum missing mip is not according to the expected value.
| |||||||||||||
| Spt3080InputRefDevType | 1.3.6.1.4.1.18086.3080.3.90 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Type of TCXO/OCXO
| |||||||||||||
| Spt3080InputRefCalDate | 1.3.6.1.4.1.18086.3080.3.91 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Calibration Date | |||||||||||||
| Spt3080InputRefCalVer | 1.3.6.1.4.1.18086.3080.3.92 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Calibration SW Version | |||||||||||||
| Npt3080Output | 1.3.6.1.4.1.18086.3080.4 | ||||||||||||
| Spt3080OutputMode | 1.3.6.1.4.1.18086.3080.4.1 | INTEGER | RW | normal(0) | |||||||||
scalar · INTEGER · read-write · current Control RF output mode
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputRfFrequency | 1.3.6.1.4.1.18086.3080.4.2 | Integer32 (30000000..860000000) | RW | 530000000 | |||||||||
scalar · Integer32 (30000000..860000000) · read-write · current Output RF frequency
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputRfLevel | 1.3.6.1.4.1.18086.3080.4.3 | Integer32 (-1000..1000) | RW | ||||||||||
scalar · Integer32 (-1000..1000) · read-write · current Sets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RF
| |||||||||||||
| Spt3080OutputBandwidth | 1.3.6.1.4.1.18086.3080.4.4 | Integer32 (5..8) | RW | ||||||||||
scalar · Integer32 (5..8) · read-write · current Output Bandwidth
| |||||||||||||
| Spt3080OutputChannel | 1.3.6.1.4.1.18086.3080.4.5 | Integer32 (21..69) | RW | ||||||||||
scalar · Integer32 (21..69) · read-write · current Channel settings | |||||||||||||
| Spt3080OutputSynchronized | 1.3.6.1.4.1.18086.3080.4.6 | INTEGER | RO | synchronized(1) | |||||||||
scalar · INTEGER · read-only · current The values of pt3080OutputRfFrequency, pt3080OutputBandwidth and pt3080OutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputMute | 1.3.6.1.4.1.18086.3080.4.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Output mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasons
| |||||||||||||
| Spt3080OutputPolarity | 1.3.6.1.4.1.18086.3080.4.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control RF output polarity
| |||||||||||||
| Spt3080OutputPowerLevel | 1.3.6.1.4.1.18086.3080.4.9 | Integer32 (280..490) | RW | ||||||||||
scalar · Integer32 (280..490) · read-write · current The desired output power level.
| |||||||||||||
| Spt3080OutputRfFrequencyOffset | 1.3.6.1.4.1.18086.3080.4.10 | Integer32 (-8388608..8388607) | RW | ||||||||||
scalar · Integer32 (-8388608..8388607) · read-write · current Output RF frequency offset
| |||||||||||||
| Spt3080OutputIfEnable | 1.3.6.1.4.1.18086.3080.4.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control IF output
| |||||||||||||
| Spt3080OutputIfFrequency | 1.3.6.1.4.1.18086.3080.4.14 | Integer32 (35150000..37150000) | RW | ||||||||||
scalar · Integer32 (35150000..37150000) · read-write · current Output Frequency for I/F
| |||||||||||||
| Spt3080OutputIfPolarity | 1.3.6.1.4.1.18086.3080.4.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control IF output polarity
| |||||||||||||
| Spt3080OutputIfLevel | 1.3.6.1.4.1.18086.3080.4.16 | Integer32 (-1000..0) | RW | ||||||||||
scalar · Integer32 (-1000..0) · read-write · current Output Level for I/F
| |||||||||||||
| Spt3080OutputEffectiveLevel | 1.3.6.1.4.1.18086.3080.4.17 | Integer32 | RO | 40 | |||||||||
scalar · Integer32 · read-only · current Effective RF Output Level
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputActualLevel | 1.3.6.1.4.1.18086.3080.4.18 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current Actual RF Output Level
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputRfDetectedActualLevel | 1.3.6.1.4.1.18086.3080.4.19 | Integer32 | RO | 70 | |||||||||
scalar · Integer32 · read-only · current Detected Output Level for RF
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080OutputRfDetectedLowerLevelLimit | 1.3.6.1.4.1.18086.3080.4.20 | Integer32 (2..50) | RW | ||||||||||
scalar · Integer32 (2..50) · read-write · current Limit to how much lower the detected RF output level can be than the configured level.
| |||||||||||||
| Spt3080OutputRfDetectedLowerLevelcontrol | 1.3.6.1.4.1.18086.3080.4.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the lower limit for RF output level is enforced.
| |||||||||||||
| Spt3080OutputRfDetectedHigherLevelLimit | 1.3.6.1.4.1.18086.3080.4.22 | Integer32 (2..50) | RW | ||||||||||
scalar · Integer32 (2..50) · read-write · current Limit to how much higher the detected RF output level can be than the configured level.
| |||||||||||||
| Spt3080OutputRfDetectedHigherLevelcontrol | 1.3.6.1.4.1.18086.3080.4.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the higher limit for RF output level is enforced.
| |||||||||||||
| Spt3080OutputRfAlcControl | 1.3.6.1.4.1.18086.3080.4.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the ALC system is enabled or disabled.
| |||||||||||||
| Spt3080OutputRfAlcSense | 1.3.6.1.4.1.18086.3080.4.31 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls which sense port is used by the ALC system if the ALC is enabled.
| |||||||||||||
| Spt3080OutputRfAlcSetpointPort1 | 1.3.6.1.4.1.18086.3080.4.32 | Integer32 (-11000..11000) | RW | ||||||||||
scalar · Integer32 (-11000..11000) · read-write · current ALC setpoint for RF Sense Port 1
| |||||||||||||
| Spt3080OutputRfAlcSetpointPort2 | 1.3.6.1.4.1.18086.3080.4.33 | Integer32 (-11000..11000) | RW | ||||||||||
scalar · Integer32 (-11000..11000) · read-write · current ALC setpoint for RF Sense Port 2
| |||||||||||||
| Spt3080OutputRfAlcStatus | 1.3.6.1.4.1.18086.3080.4.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status for whether the ALC system is enabled or disabled.
| |||||||||||||
| Spt3080OutputRfAlcStatusInformation | 1.3.6.1.4.1.18086.3080.4.35 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Information on the state of the ALC system. | |||||||||||||
| Spt3080OutputRfCableMode | 1.3.6.1.4.1.18086.3080.4.50 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Control whether Cable Level loss compensation should be enabled
| |||||||||||||
| Spt3080OutputRfCableConstantLevelOffset | 1.3.6.1.4.1.18086.3080.4.51 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Constant level offset to add to RF Output level. Only used if mode is Constant.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset0 | 1.3.6.1.4.1.18086.3080.4.52 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset1 | 1.3.6.1.4.1.18086.3080.4.53 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset2 | 1.3.6.1.4.1.18086.3080.4.54 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset3 | 1.3.6.1.4.1.18086.3080.4.55 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset4 | 1.3.6.1.4.1.18086.3080.4.56 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Spt3080OutputRfCableFrequencyLevelOffset5 | 1.3.6.1.4.1.18086.3080.4.57 | Integer32 (-10000..10000) | RW | ||||||||||
scalar · Integer32 (-10000..10000) · read-write · current Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
| |||||||||||||
| Npt3080Gps | 1.3.6.1.4.1.18086.3080.7 | ||||||||||||
| Spt3080Gps1PPSStatus | 1.3.6.1.4.1.18086.3080.7.1 | INTEGER | RO | locked(0) | |||||||||
scalar · INTEGER · read-only · current Returns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform well. UNLOCKED indicates that it is not. For the GPS system to perform well at least 4 satellites must be visible with a proper signal to noise ratio.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsVisibleSatellites | 1.3.6.1.4.1.18086.3080.7.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Returns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless of signal to noise ratio. Note that the upper value N can change with the launch of new satellites. For some time, however, the GPS system has had a total of 24 satellites. | |||||||||||||
| Spt3080GpsTrackedSatellites | 1.3.6.1.4.1.18086.3080.7.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Returns the number of currently tracked satellites via the GPS receiver. | |||||||||||||
| Spt3080GpsBias | 1.3.6.1.4.1.18086.3080.7.4 | INTEGER | RW | on(1) | |||||||||
scalar · INTEGER · read-write · current Defines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter to set to ON.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsLongtitude | 1.3.6.1.4.1.18086.3080.7.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 180]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes E, W (East, West). | |||||||||||||
| Spt3080GpsLatitude | 1.3.6.1.4.1.18086.3080.7.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 90]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes N, S (North, South). | |||||||||||||
| Spt3080GpsAltitude | 1.3.6.1.4.1.18086.3080.7.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes the altitude in metres with one digit after the comma. The altitude can be negative. | |||||||||||||
| Spt3080GpsVersion | 1.3.6.1.4.1.18086.3080.7.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns the GPS chip firmware version as a string. | |||||||||||||
| Spt3080GpsHoldoverTime | 1.3.6.1.4.1.18086.3080.7.10 | Integer32 (0..172800) | RW | ||||||||||
scalar · Integer32 (0..172800) · read-write · current Defines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to continue operating for holdover time seconds using the internal GPS chip oscillator. If - when the holdover time interval expires - the GPS locking it still lost, the GPS operation will be maintained using external timing if present. If external timing is not present the GPS operation will be maintained using the internal motherboard oscillator. | |||||||||||||
| Spt3080GpsHoldoverForever | 1.3.6.1.4.1.18086.3080.7.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case NO is chosen the GPS holdover time applies.
| |||||||||||||
| Spt3080GpsCableDelay | 1.3.6.1.4.1.18086.3080.7.12 | Integer32 (-18125..13750) | RW | ||||||||||
scalar · Integer32 (-18125..13750) · read-write · current Defines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensated.
| |||||||||||||
| Spt3080GpsState | 1.3.6.1.4.1.18086.3080.7.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Returns a string describing the GPS state. For informational purposes. | |||||||||||||
| Spt3080GpsVisibleSatellitesSnr | 1.3.6.1.4.1.18086.3080.7.14 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Returns the average signal to noise ratio of all visible satellites via the built-in GPS receiver
| |||||||||||||
| Spt3080GpsbiasVoltage | 1.3.6.1.4.1.18086.3080.7.15 | INTEGER | RW | gpsant-33v(1) | |||||||||
scalar · INTEGER · read-write · current Defines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsSatelliteSystemGPS | 1.3.6.1.4.1.18086.3080.7.16 | INTEGER | RW | enable(1) | |||||||||
scalar · INTEGER · read-write · current Controls whether GPS satellites are used to obtain position and timing information.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsSatelliteSystemGLONASS | 1.3.6.1.4.1.18086.3080.7.17 | INTEGER | RW | enable(1) | |||||||||
scalar · INTEGER · read-write · current Controls whether GLONASS satellites are used to obtain position and timing information.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsSatelliteSystemGALILEO | 1.3.6.1.4.1.18086.3080.7.18 | INTEGER | RW | disable(0) | |||||||||
scalar · INTEGER · read-write · current Controls whether GALILEO satellites are used to obtain position and timing information.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080GpsSatelliteSystemCOMPASS | 1.3.6.1.4.1.18086.3080.7.19 | INTEGER | RW | disable(0) | |||||||||
scalar · INTEGER · read-write · current Controls whether COMPASS satellites are used to obtain position and timing information.
Example values from LibreNMS test devices
| |||||||||||||
| Npt3080TSoIP | 1.3.6.1.4.1.18086.3080.10 | ||||||||||||
| Spt3080TSoIPRx1SyncTimeout | 1.3.6.1.4.1.18086.3080.10.9 | Integer32 (16..250) | RW | ||||||||||
scalar · Integer32 (16..250) · read-write · current Specifies the maximum time accepted between received TS packages.
| |||||||||||||
| Spt3080TSoIPRx1MinumimLatency | 1.3.6.1.4.1.18086.3080.10.10 | Integer32 (0..5000) | RW | ||||||||||
scalar · Integer32 (0..5000) · read-write · current Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
| |||||||||||||
| Spt3080TSoIPRx1LanSelect | 1.3.6.1.4.1.18086.3080.10.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies which virtual LAN interface to receive IP/UDP packets from.
| |||||||||||||
| Spt3080TSoIPRx1Multicast | 1.3.6.1.4.1.18086.3080.10.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.
| |||||||||||||
| Spt3080TSoIPRx1Protocol | 1.3.6.1.4.1.18086.3080.10.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects which protocol to expect incoming packets to have.
| |||||||||||||
| Spt3080TSoIPRx1Portnumber | 1.3.6.1.4.1.18086.3080.10.14 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Specifies which UDP port number to receive IP/UDP packets from. | |||||||||||||
| Spt3080TSoIPRx1ReceiverEnable | 1.3.6.1.4.1.18086.3080.10.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
| |||||||||||||
| Spt3080TSoIPRx1PacketErrorRatioLimit | 1.3.6.1.4.1.18086.3080.10.16 | Integer32 (0..500) | RW | ||||||||||
scalar · Integer32 (0..500) · read-write · current Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
| |||||||||||||
| Spt3080TSoIPRx1Status | 1.3.6.1.4.1.18086.3080.10.17 | INTEGER | RO | locked(0) | |||||||||
scalar · INTEGER · read-only · current The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080TSoIPRx1CurrentIPAddress | 1.3.6.1.4.1.18086.3080.10.18 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current receive IP address for the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1SequenceErrors | 1.3.6.1.4.1.18086.3080.10.19 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of sequence errors on this channel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1PacketErrorRatio | 1.3.6.1.4.1.18086.3080.10.20 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Shows the current error ratio of uncoming traffic for this UDP port.
| |||||||||||||
| Spt3080TSoIPRx1LostIPFrames | 1.3.6.1.4.1.18086.3080.10.21 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic. | |||||||||||||
| Spt3080TSoIPRx1CorrectedIPFrames | 1.3.6.1.4.1.18086.3080.10.22 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1FecColumn | 1.3.6.1.4.1.18086.3080.10.23 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent FEC Column (L) number for this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1FecRow | 1.3.6.1.4.1.18086.3080.10.24 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent FEC Row (D) number for this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1PacketsPerFrame | 1.3.6.1.4.1.18086.3080.10.25 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent number of TS packets per IP frames on this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx1IpBitrate | 1.3.6.1.4.1.18086.3080.10.26 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Shows the current bitrate of uncoming traffic for this UDP port.
| |||||||||||||
| Spt3080TSoIPRx1QueueSize | 1.3.6.1.4.1.18086.3080.10.27 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent queue size for this cannel on the TSoIP interface.
| |||||||||||||
| Spt3080TSoIPRx1CurrentLatency | 1.3.6.1.4.1.18086.3080.10.28 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current latency incurrent by queue size on this channel on the TSoIP interface.
| |||||||||||||
| Spt3080TSoIPRx1TSPacketSize | 1.3.6.1.4.1.18086.3080.10.29 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204. | |||||||||||||
| Spt3080TSoIPRx1OverrunIPFrames | 1.3.6.1.4.1.18086.3080.10.30 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data. | |||||||||||||
| Spt3080TSoIPRx2SyncTimeout | 1.3.6.1.4.1.18086.3080.10.39 | Integer32 (16..250) | RW | ||||||||||
scalar · Integer32 (16..250) · read-write · current Specifies the maximum time accepted between received TS packages.
| |||||||||||||
| Spt3080TSoIPRx2MinumimLatency | 1.3.6.1.4.1.18086.3080.10.40 | Integer32 (0..5000) | RW | ||||||||||
scalar · Integer32 (0..5000) · read-write · current Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
| |||||||||||||
| Spt3080TSoIPRx2LanSelect | 1.3.6.1.4.1.18086.3080.10.41 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies which virtual LAN interface to receive IP/UDP packets from.
| |||||||||||||
| Spt3080TSoIPRx2Multicast | 1.3.6.1.4.1.18086.3080.10.42 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered.
| |||||||||||||
| Spt3080TSoIPRx2Protocol | 1.3.6.1.4.1.18086.3080.10.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects which protocol to expect incoming packets to have.
| |||||||||||||
| Spt3080TSoIPRx2Portnumber | 1.3.6.1.4.1.18086.3080.10.44 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Specifies which UDP port number to receive IP/UDP packets from. | |||||||||||||
| Spt3080TSoIPRx2ReceiverEnable | 1.3.6.1.4.1.18086.3080.10.45 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
| |||||||||||||
| Spt3080TSoIPRx2PacketErrorRatioLimit | 1.3.6.1.4.1.18086.3080.10.46 | Integer32 (0..500) | RW | ||||||||||
scalar · Integer32 (0..500) · read-write · current Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
| |||||||||||||
| Spt3080TSoIPRx2Status | 1.3.6.1.4.1.18086.3080.10.47 | INTEGER | RO | disabled(2) | |||||||||
scalar · INTEGER · read-only · current The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
Example values from LibreNMS test devices
| |||||||||||||
| Spt3080TSoIPRx2CurrentIPAddress | 1.3.6.1.4.1.18086.3080.10.48 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current receive IP address for the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2SequenceErrors | 1.3.6.1.4.1.18086.3080.10.49 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of sequence errors on this channel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2PacketErrorRatio | 1.3.6.1.4.1.18086.3080.10.50 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Shows the current error ratio of uncoming traffic for this UDP port.
| |||||||||||||
| Spt3080TSoIPRx2LostIPFrames | 1.3.6.1.4.1.18086.3080.10.51 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic. | |||||||||||||
| Spt3080TSoIPRx2CorrectedIPFrames | 1.3.6.1.4.1.18086.3080.10.52 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2FecColumn | 1.3.6.1.4.1.18086.3080.10.53 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent FEC Column (L) number for this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2FecRow | 1.3.6.1.4.1.18086.3080.10.54 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent FEC Row (D) number for this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2PacketsPerFrame | 1.3.6.1.4.1.18086.3080.10.55 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent number of TS packets per IP frames on this cannel on the TSoIP interface. | |||||||||||||
| Spt3080TSoIPRx2IpBitrate | 1.3.6.1.4.1.18086.3080.10.56 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Shows the current bitrate of uncoming traffic for this UDP port.
| |||||||||||||
| Spt3080TSoIPRx2QueueSize | 1.3.6.1.4.1.18086.3080.10.57 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent queue size for this cannel on the TSoIP interface.
| |||||||||||||
| Spt3080TSoIPRx2CurrentLatency | 1.3.6.1.4.1.18086.3080.10.58 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current latency incurrent by queue size on this channel on the TSoIP interface.
| |||||||||||||
| Spt3080TSoIPRx2TSPacketSize | 1.3.6.1.4.1.18086.3080.10.59 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204. | |||||||||||||
| Spt3080TSoIPRx2OverrunIPFrames | 1.3.6.1.4.1.18086.3080.10.60 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data. | |||||||||||||
| Npt3080Monitor | 1.3.6.1.4.1.18086.3080.12 | ||||||||||||
| Spt3080MonitorSource | 1.3.6.1.4.1.18086.3080.12.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the source to be monitored on the ASI monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPEnable | 1.3.6.1.4.1.18086.3080.12.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable the generation of monitor data over TSoIP.
| |||||||||||||
| Spt3080MonitorTSoIPSource | 1.3.6.1.4.1.18086.3080.12.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the source to be monitored on the TSoIP monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPDestIPAddress | 1.3.6.1.4.1.18086.3080.12.12 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Selects the destination IP address of the data to be monitored on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPDestPort | 1.3.6.1.4.1.18086.3080.12.13 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Selects the destination UDP Port number of the data to be monitored on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPProtocol | 1.3.6.1.4.1.18086.3080.12.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the protocol to be used on the TSoIP monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPEnableFec | 1.3.6.1.4.1.18086.3080.12.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable FEC protocol on the output data from the TSoIP Monitor.
| |||||||||||||
| Spt3080MonitorTSoIPFecColumn | 1.3.6.1.4.1.18086.3080.12.16 | Integer32 (1..20) | RW | ||||||||||
scalar · Integer32 (1..20) · read-write · current Selects the FEC protocoll Column number (L) of the data to be monitored on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPFecRow | 1.3.6.1.4.1.18086.3080.12.17 | Integer32 (4..20) | RW | ||||||||||
scalar · Integer32 (4..20) · read-write · current Selects the FEC protocol Row number (D) of the data to be monitored on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPFecSkew | 1.3.6.1.4.1.18086.3080.12.18 | Integer32 (0..4) | RW | ||||||||||
scalar · Integer32 (0..4) · read-write · current Selects the FEC protocol Skew (non block alignment of FEC Frame) of the data to be monitored on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPKeepNullPackets | 1.3.6.1.4.1.18086.3080.12.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Retain or discard Null packets of the generation of monitor data over TSoIP.
| |||||||||||||
| Spt3080MonitorTSoIPPacketsPerFrame | 1.3.6.1.4.1.18086.3080.12.20 | Integer32 (1..7) | RW | ||||||||||
scalar · Integer32 (1..7) · read-write · current Set the number of TS packets to send per IP frame on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPUDPChecksum | 1.3.6.1.4.1.18086.3080.12.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Generate UDP checksum in the outgoing packets of the TSoIP Monitor.
| |||||||||||||
| Spt3080MonitorTSoIPDSCP | 1.3.6.1.4.1.18086.3080.12.22 | Integer32 (0..255) | RW | ||||||||||
scalar · Integer32 (0..255) · read-write · current Selects the value of the TOS/DSCP field in IP packets to be sent on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPTTL | 1.3.6.1.4.1.18086.3080.12.23 | Integer32 (1..255) | RW | ||||||||||
scalar · Integer32 (1..255) · read-write · current Selects the value of the TTL (Time-To-Live) field in IP packets to be sent on the TSoIP monitor output. | |||||||||||||
| Spt3080MonitorTSoIPGenerateError | 1.3.6.1.4.1.18086.3080.12.24 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Artificially generate an error rate as a percentage of frames lost on the TSoIP monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPMulticastLanSelect | 1.3.6.1.4.1.18086.3080.12.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies which virtual LAN interface to transmit Multicast IP/UDP packets out via.
| |||||||||||||
| Spt3080MonitorTSoIPIpBitrate | 1.3.6.1.4.1.18086.3080.12.30 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current rate IP packets traffic to be sent on the TSoIP monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPLostIPFrames | 1.3.6.1.4.1.18086.3080.12.31 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of IP packets traffic generated but lost on the TSoIP monitor output.
| |||||||||||||
| Spt3080MonitorTSoIPTSSize | 1.3.6.1.4.1.18086.3080.12.32 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current TS packet size (188 or 204) on the TSoIP monitor output.
| |||||||||||||
| Npt3080Test | 1.3.6.1.4.1.18086.3080.13 | ||||||||||||
| Spt3080TestEnable | 1.3.6.1.4.1.18086.3080.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current controls the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - testSignalsArray[testSignals_OFF] Normal operation. No test signal. - testSignalsArray[testSignals_SCAR] A single carrier output is provided. - testSignalsArray[testSignals_SWEEP2] A test signal with full spectrum bandwidth and a 3dB peak to average power ratio. (OFDM PPR-3). - testSignalsArray[testSignals_PRBSON] Forced transmission of stuffing data only (null packets) irrespective of the status of the MPEG-2 transport stream input. - testSignalsArray[testSignals_PRBSAUTO] Automatic transmission of spectrum based on stuffing data when no MPEG-2 TS input is available.
| |||||||||||||
| Spt3080TestEnableReconnect | 1.3.6.1.4.1.18086.3080.13.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OFF] The selected test signal will be set to OFF after reset. - onOffArray[TEXT_INDEX_ON] The selected test signal will be output after reset.
| |||||||||||||
| Spt3080TestScarrierLevel | 1.3.6.1.4.1.18086.3080.13.3 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current Control level of the single carrier test signal. | |||||||||||||
| Spt3080TestscarrierFrequencyOffset | 1.3.6.1.4.1.18086.3080.13.4 | Integer32 (-4000000..4000000) | RW | ||||||||||
scalar · Integer32 (-4000000..4000000) · read-write · current Control frequency offset of the single carrier test signal.
| |||||||||||||
| Npt3080Alarm | 1.3.6.1.4.1.18086.3080.14 | ||||||||||||
| Tpt3080GroupAlarmTable | 1.3.6.1.4.1.18086.3080.14.1 | NA | |||||||||||
table · not-accessible · current This table contains the group alarms | |||||||||||||
| Rpt3080GroupAlarmEntry | 1.3.6.1.4.1.18086.3080.14.1.1 | NA | |||||||||||
| Cpt3080GroupAlarmID | 1.3.6.1.4.1.18086.3080.14.1.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080GroupAlarmDescription | 1.3.6.1.4.1.18086.3080.14.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080GroupAlarmState | 1.3.6.1.4.1.18086.3080.14.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current GroupAlarm state condition
| |||||||||||||
| Cpt3080GroupAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080GroupAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080GroupAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080GroupAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080GroupAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080GroupAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080GroupAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080ASITSPrimaryAlarmTable | 1.3.6.1.4.1.18086.3080.14.5 | NA | |||||||||||
table · not-accessible · current This table contains the ASI TS-Primary alarms | |||||||||||||
| Rpt3080ASITSPrimaryAlarmEntry | 1.3.6.1.4.1.18086.3080.14.5.1 | NA | |||||||||||
| Cpt3080ASITSPrimaryAlarmID | 1.3.6.1.4.1.18086.3080.14.5.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080ASITSPrimaryAlarmDescription | 1.3.6.1.4.1.18086.3080.14.5.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080ASITSPrimaryAlarmState | 1.3.6.1.4.1.18086.3080.14.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current ASITSPrimaryAlarm state condition
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.5.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.5.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.5.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.5.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.5.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.5.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080ASITSPrimaryAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.5.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080ASITSSecondaryAlarmTable | 1.3.6.1.4.1.18086.3080.14.6 | NA | |||||||||||
table · not-accessible · current This table contains the ASI alarms | |||||||||||||
| Rpt3080ASITSSecondaryAlarmEntry | 1.3.6.1.4.1.18086.3080.14.6.1 | NA | |||||||||||
| Cpt3080ASITSSecondaryAlarmID | 1.3.6.1.4.1.18086.3080.14.6.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080ASITSSecondaryAlarmDescription | 1.3.6.1.4.1.18086.3080.14.6.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080ASITSSecondaryAlarmState | 1.3.6.1.4.1.18086.3080.14.6.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current ASITSSecondaryAlarm state condition
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.6.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.6.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.6.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.6.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.6.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.6.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080ASITSSecondaryAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.6.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080SFNAlarmTable | 1.3.6.1.4.1.18086.3080.14.7 | NA | |||||||||||
table · not-accessible · current This table contains the SFN alarms | |||||||||||||
| Rpt3080SFNAlarmEntry | 1.3.6.1.4.1.18086.3080.14.7.1 | NA | |||||||||||
| Cpt3080SFNAlarmID | 1.3.6.1.4.1.18086.3080.14.7.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080SFNAlarmDescription | 1.3.6.1.4.1.18086.3080.14.7.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080SFNAlarmState | 1.3.6.1.4.1.18086.3080.14.7.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current SFNAlarm state condition
| |||||||||||||
| Cpt3080SFNAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.7.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080SFNAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.7.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080SFNAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.7.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080SFNAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.7.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080SFNAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.7.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080SFNAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.7.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080SFNAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.7.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080ReferenceAlarmTable | 1.3.6.1.4.1.18086.3080.14.8 | NA | |||||||||||
table · not-accessible · current This table contains the Reference alarms | |||||||||||||
| Rpt3080ReferenceAlarmEntry | 1.3.6.1.4.1.18086.3080.14.8.1 | NA | |||||||||||
| Cpt3080ReferenceAlarmID | 1.3.6.1.4.1.18086.3080.14.8.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080ReferenceAlarmDescription | 1.3.6.1.4.1.18086.3080.14.8.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080ReferenceAlarmState | 1.3.6.1.4.1.18086.3080.14.8.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current ReferenceAlarm state condition
| |||||||||||||
| Cpt3080ReferenceAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.8.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080ReferenceAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.8.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080ReferenceAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.8.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080ReferenceAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.8.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080ReferenceAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.8.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080ReferenceAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.8.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080ReferenceAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.8.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080RFAlarmTable | 1.3.6.1.4.1.18086.3080.14.9 | NA | |||||||||||
table · not-accessible · current This table contains the RF alarms | |||||||||||||
| Rpt3080RFAlarmEntry | 1.3.6.1.4.1.18086.3080.14.9.1 | NA | |||||||||||
| Cpt3080RFAlarmID | 1.3.6.1.4.1.18086.3080.14.9.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080RFAlarmDescription | 1.3.6.1.4.1.18086.3080.14.9.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080RFAlarmState | 1.3.6.1.4.1.18086.3080.14.9.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current RFAlarm state condition
| |||||||||||||
| Cpt3080RFAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.9.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080RFAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.9.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080RFAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.9.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080RFAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.9.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080RFAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.9.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080RFAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.9.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080RFAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.9.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080GPSAlarmTable | 1.3.6.1.4.1.18086.3080.14.10 | NA | |||||||||||
table · not-accessible · current This table contains the GPS alarms | |||||||||||||
| Rpt3080GPSAlarmEntry | 1.3.6.1.4.1.18086.3080.14.10.1 | NA | |||||||||||
| Cpt3080GPSAlarmID | 1.3.6.1.4.1.18086.3080.14.10.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080GPSAlarmDescription | 1.3.6.1.4.1.18086.3080.14.10.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080GPSAlarmState | 1.3.6.1.4.1.18086.3080.14.10.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current GPSAlarm state condition
| |||||||||||||
| Cpt3080GPSAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.10.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080GPSAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.10.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080GPSAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.10.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080GPSAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.10.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080GPSAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.10.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080GPSAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.10.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080GPSAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.10.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080TSoIPAlarmTable | 1.3.6.1.4.1.18086.3080.14.12 | NA | |||||||||||
table · not-accessible · current This table contains the TSoIP alarms | |||||||||||||
| Rpt3080TSoIPAlarmEntry | 1.3.6.1.4.1.18086.3080.14.12.1 | NA | |||||||||||
| Cpt3080TSoIPAlarmID | 1.3.6.1.4.1.18086.3080.14.12.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080TSoIPAlarmDescription | 1.3.6.1.4.1.18086.3080.14.12.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080TSoIPAlarmState | 1.3.6.1.4.1.18086.3080.14.12.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current TSoIPAlarm state condition
| |||||||||||||
| Cpt3080TSoIPAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.12.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080TSoIPAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.12.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080TSoIPAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.12.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080TSoIPAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.12.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080TSoIPAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.12.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080TSoIPAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.12.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080TSoIPAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.12.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080ExternalAlarmTable | 1.3.6.1.4.1.18086.3080.14.13 | NA | |||||||||||
table · not-accessible · current This table contains the External alarms | |||||||||||||
| Rpt3080ExternalAlarmEntry | 1.3.6.1.4.1.18086.3080.14.13.1 | NA | |||||||||||
| Cpt3080ExternalAlarmID | 1.3.6.1.4.1.18086.3080.14.13.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080ExternalAlarmDescription | 1.3.6.1.4.1.18086.3080.14.13.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080ExternalAlarmState | 1.3.6.1.4.1.18086.3080.14.13.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current ExternalAlarm state condition
| |||||||||||||
| Cpt3080ExternalAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.13.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080ExternalAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.13.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080ExternalAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.13.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080ExternalAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.13.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080ExternalAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.13.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080ExternalAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.13.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080ExternalAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.13.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080HWMonitorAlarmTable | 1.3.6.1.4.1.18086.3080.14.14 | NA | |||||||||||
table · not-accessible · current This table contains the HW Monitor alarms | |||||||||||||
| Rpt3080HWMonitorAlarmEntry | 1.3.6.1.4.1.18086.3080.14.14.1 | NA | |||||||||||
| Cpt3080HWMonitorAlarmID | 1.3.6.1.4.1.18086.3080.14.14.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080HWMonitorAlarmDescription | 1.3.6.1.4.1.18086.3080.14.14.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080HWMonitorAlarmState | 1.3.6.1.4.1.18086.3080.14.14.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current HWMonitorAlarm state condition
| |||||||||||||
| Cpt3080HWMonitorAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.14.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080HWMonitorAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.14.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080HWMonitorAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.14.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080HWMonitorAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.14.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080HWMonitorAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.14.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080HWMonitorAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.14.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080HWMonitorAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.14.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080CommsAlarmTable | 1.3.6.1.4.1.18086.3080.14.15 | NA | |||||||||||
table · not-accessible · current This table contains the Communication alarms | |||||||||||||
| Rpt3080CommsAlarmEntry | 1.3.6.1.4.1.18086.3080.14.15.1 | NA | |||||||||||
| Cpt3080CommsAlarmID | 1.3.6.1.4.1.18086.3080.14.15.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080CommsAlarmDescription | 1.3.6.1.4.1.18086.3080.14.15.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080CommsAlarmState | 1.3.6.1.4.1.18086.3080.14.15.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current CommsAlarm state condition
| |||||||||||||
| Cpt3080CommsAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.15.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080CommsAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.15.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080CommsAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.15.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080CommsAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.15.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080CommsAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.15.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080CommsAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.15.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080CommsAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.15.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080ASIAlarmTable | 1.3.6.1.4.1.18086.3080.14.16 | NA | |||||||||||
table · not-accessible · current This table contains the ASI alarms | |||||||||||||
| Rpt3080ASIAlarmEntry | 1.3.6.1.4.1.18086.3080.14.16.1 | NA | |||||||||||
| Cpt3080ASIAlarmID | 1.3.6.1.4.1.18086.3080.14.16.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080ASIAlarmDescription | 1.3.6.1.4.1.18086.3080.14.16.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080ASIAlarmState | 1.3.6.1.4.1.18086.3080.14.16.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current ASIAlarm state condition
| |||||||||||||
| Cpt3080ASIAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.16.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080ASIAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.16.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080ASIAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.16.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080ASIAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.16.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080ASIAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.16.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080ASIAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.16.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080ASIAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.16.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080DemodulatorAlarmTable | 1.3.6.1.4.1.18086.3080.14.17 | NA | |||||||||||
table · not-accessible · current This table contains the Demodulator alarms | |||||||||||||
| Rpt3080DemodulatorAlarmEntry | 1.3.6.1.4.1.18086.3080.14.17.1 | NA | |||||||||||
| Cpt3080DemodulatorAlarmID | 1.3.6.1.4.1.18086.3080.14.17.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080DemodulatorAlarmDescription | 1.3.6.1.4.1.18086.3080.14.17.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080DemodulatorAlarmState | 1.3.6.1.4.1.18086.3080.14.17.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current DemodulatorAlarm state condition
| |||||||||||||
| Cpt3080DemodulatorAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.17.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080DemodulatorAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.17.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080DemodulatorAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.17.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080DemodulatorAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.17.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080DemodulatorAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.17.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080DemodulatorAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.17.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080DemodulatorAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.17.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Tpt3080InternalAlarmTable | 1.3.6.1.4.1.18086.3080.14.18 | NA | |||||||||||
table · not-accessible · current This table contains the Internal alarms | |||||||||||||
| Rpt3080InternalAlarmEntry | 1.3.6.1.4.1.18086.3080.14.18.1 | NA | |||||||||||
| Cpt3080InternalAlarmID | 1.3.6.1.4.1.18086.3080.14.18.1.1 | Integer32 (0..255) | NA | ||||||||||
column · Integer32 (0..255) · not-accessible · current Unique ID for this alarm | |||||||||||||
| Cpt3080InternalAlarmDescription | 1.3.6.1.4.1.18086.3080.14.18.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Description for this alarm | |||||||||||||
| Cpt3080InternalAlarmState | 1.3.6.1.4.1.18086.3080.14.18.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current InternalAlarm state condition
| |||||||||||||
| Cpt3080InternalAlarmActionEventlog | 1.3.6.1.4.1.18086.3080.14.18.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an event in the eventlog
| |||||||||||||
| Cpt3080InternalAlarmActionRelay1 | 1.3.6.1.4.1.18086.3080.14.18.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay1
| |||||||||||||
| Cpt3080InternalAlarmActionRelay2 | 1.3.6.1.4.1.18086.3080.14.18.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm activate relay2
| |||||||||||||
| Cpt3080InternalAlarmActionTrap | 1.3.6.1.4.1.18086.3080.14.18.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate a trap
| |||||||||||||
| Cpt3080InternalAlarmActionEmail | 1.3.6.1.4.1.18086.3080.14.18.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm generate an email
| |||||||||||||
| Cpt3080InternalAlarmActionAlarmLED | 1.3.6.1.4.1.18086.3080.14.18.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm turn Alarm LED on frontpanel on
| |||||||||||||
| Cpt3080InternalAlarmActionForceMode | 1.3.6.1.4.1.18086.3080.14.18.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Will the current alarm mute output
| |||||||||||||
| Npt3080Preset | 1.3.6.1.4.1.18086.3080.15 | ||||||||||||
| Tpt3080PresetTable | 1.3.6.1.4.1.18086.3080.15.1 | NA | |||||||||||
table · not-accessible · current This table contains the presets | |||||||||||||
| Rpt3080PresetEntry | 1.3.6.1.4.1.18086.3080.15.1.1 | NA | |||||||||||
| Cpt3080PresetNo | 1.3.6.1.4.1.18086.3080.15.1.1.1 | Integer32 (1..10) | NA | ||||||||||
column · Integer32 (1..10) · not-accessible · current Unique number for this preset | |||||||||||||
| Cpt3080PresetName | 1.3.6.1.4.1.18086.3080.15.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Name for this preset | |||||||||||||
| Spt3080PresetRecall | 1.3.6.1.4.1.18086.3080.15.2 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current Install this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect. | |||||||||||||
| Spt3080PresetStore | 1.3.6.1.4.1.18086.3080.15.3 | Integer32 (0..8) | RW | ||||||||||
scalar · Integer32 (0..8) · read-write · current Store the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect. | |||||||||||||
| Npt3080Eventlog | 1.3.6.1.4.1.18086.3080.16 | ||||||||||||
| Tpt3080EventlogTable | 1.3.6.1.4.1.18086.3080.16.1 | NA | |||||||||||
table · not-accessible · current This table contains the group alarms | |||||||||||||
| Rpt3080EventlogEntry | 1.3.6.1.4.1.18086.3080.16.1.1 | NA | |||||||||||
| Cpt3080EventlogNo | 1.3.6.1.4.1.18086.3080.16.1.1.1 | Integer32 (1..2047) | NA | ||||||||||
column · Integer32 (1..2047) · not-accessible · current Unique number for this event | |||||||||||||
| Cpt3080EventlogID | 1.3.6.1.4.1.18086.3080.16.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Unique ID for this type of event | |||||||||||||
| Cpt3080EventlogTimestamp | 1.3.6.1.4.1.18086.3080.16.1.1.3 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp for this event | |||||||||||||
| Cpt3080EventlogText | 1.3.6.1.4.1.18086.3080.16.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Text for this event | |||||||||||||
| Spt3080EventlogClear | 1.3.6.1.4.1.18086.3080.16.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clear the entire eventlog by setting the value to 1.
| |||||||||||||
| Spt3080EventlogEnable | 1.3.6.1.4.1.18086.3080.16.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable eventlog by setting the value to 1.
| |||||||||||||
| Spt3080EventlogMode | 1.3.6.1.4.1.18086.3080.16.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries.
| |||||||||||||
| Npt3080Comms | 1.3.6.1.4.1.18086.3080.17 | ||||||||||||
| Spt3080CommsLocalStaticIpAddr | 1.3.6.1.4.1.18086.3080.17.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsLocalStaticNetmask | 1.3.6.1.4.1.18086.3080.17.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsLocalDhcpMode | 1.3.6.1.4.1.18086.3080.17.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP client on this interface.
| |||||||||||||
| Spt3080CommsLocalCurrentIpAddr | 1.3.6.1.4.1.18086.3080.17.4 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP address for this interface. | |||||||||||||
| Spt3080CommsLocalCurrentNetmask | 1.3.6.1.4.1.18086.3080.17.5 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP netmask for this interface. | |||||||||||||
| Spt3080CommsRemoteStaticIpAddr | 1.3.6.1.4.1.18086.3080.17.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsRemoteStaticNetmask | 1.3.6.1.4.1.18086.3080.17.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsRemoteCurrentIpAddr | 1.3.6.1.4.1.18086.3080.17.10 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP address for this interface. | |||||||||||||
| Spt3080CommsRemoteCurrentNetmask | 1.3.6.1.4.1.18086.3080.17.11 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP netmask for this interface. | |||||||||||||
| Spt3080CommsGbeAdminStaticIpAddr | 1.3.6.1.4.1.18086.3080.17.13 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsGbeAdminStaticNetmask | 1.3.6.1.4.1.18086.3080.17.14 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsGbeAdminCurrentIpAddr | 1.3.6.1.4.1.18086.3080.17.16 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP address for this interface. | |||||||||||||
| Spt3080CommsGbeAdminCurrentNetmask | 1.3.6.1.4.1.18086.3080.17.17 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP netmask for this interface. | |||||||||||||
| Spt3080CommsStaticDNS1ServerAddress | 1.3.6.1.4.1.18086.3080.17.19 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of DNS server 1. | |||||||||||||
| Spt3080CommsCurrentDNS1ServerAddress | 1.3.6.1.4.1.18086.3080.17.20 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The Current IP address of DNS server 1. | |||||||||||||
| Spt3080CommsStaticDNS2ServerAddress | 1.3.6.1.4.1.18086.3080.17.21 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of DNS server 2. | |||||||||||||
| Spt3080CommsCurrentDNS2ServerAddress | 1.3.6.1.4.1.18086.3080.17.22 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The Current IP address of DNS server 2. | |||||||||||||
| Spt3080CommsStaticDNS3ServerAddress | 1.3.6.1.4.1.18086.3080.17.23 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of DNS server 3. | |||||||||||||
| Spt3080CommsCurrentDNS3ServerAddress | 1.3.6.1.4.1.18086.3080.17.24 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The Current IP address of DNS server 3. | |||||||||||||
| Spt3080CommsStaticDNSDomain | 1.3.6.1.4.1.18086.3080.17.25 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The static DNS domain name for the device. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsCurrentDNSDomain | 1.3.6.1.4.1.18086.3080.17.26 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The current DNS domain name for the device. | |||||||||||||
| Spt3080CommsStaticHostname | 1.3.6.1.4.1.18086.3080.17.27 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The static hostname for the device. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsCurrentHostname | 1.3.6.1.4.1.18086.3080.17.28 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The static hostname for the device. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsStaticGateway | 1.3.6.1.4.1.18086.3080.17.29 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router address. | |||||||||||||
| Spt3080CommsCurrentGateway | 1.3.6.1.4.1.18086.3080.17.30 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The Current IP address for the default router (gateway). | |||||||||||||
| Spt3080CommsStaticNtpServerAddress | 1.3.6.1.4.1.18086.3080.17.31 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The DNS name or IP address of the NTP server. | |||||||||||||
| Spt3080CommsCurrentNtpServerAddress | 1.3.6.1.4.1.18086.3080.17.32 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The Current IP address of the NTP server. | |||||||||||||
| Spt3080CommsEmailServerAddress | 1.3.6.1.4.1.18086.3080.17.33 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The IP address of the Email (SMTP) server. | |||||||||||||
| Spt3080CommsAlarmEmailReceiver | 1.3.6.1.4.1.18086.3080.17.34 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The email address of the receipiant of alarm emails. | |||||||||||||
| Spt3080CommsWebServicePort | 1.3.6.1.4.1.18086.3080.17.35 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The TCP port number used for Web Service. | |||||||||||||
| Spt3080CommsSCPIServicePort | 1.3.6.1.4.1.18086.3080.17.36 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The TCP port number used for SCPI Service. | |||||||||||||
| Spt3080CommsSCPIServerBaudrate | 1.3.6.1.4.1.18086.3080.17.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Baudrate used for SCPI Service on serial port.
| |||||||||||||
| Spt3080CommsRipPort | 1.3.6.1.4.1.18086.3080.17.38 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for RIP Service. | |||||||||||||
| Spt3080CommsSCPIUartInterface | 1.3.6.1.4.1.18086.3080.17.39 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Interface used for SCPI Service on serial port.
| |||||||||||||
| Spt3080CommsAccessAllowed | 1.3.6.1.4.1.18086.3080.17.48 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Current access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanel
| |||||||||||||
| Spt3080CommsAccessAllowedTimeout | 1.3.6.1.4.1.18086.3080.17.49 | Integer32 (1..1440) | RW | ||||||||||
scalar · Integer32 (1..1440) · read-write · current Timeout (in minutes) before local mode reverts to remote mode.
| |||||||||||||
| Spt3080CommsAccessAllowedTimeLeft | 1.3.6.1.4.1.18086.3080.17.50 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current time left (in seconds) before local mode reverts to remote mode.
| |||||||||||||
| Spt3080CommsAccessPasswordObserver | 1.3.6.1.4.1.18086.3080.17.51 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The access password for Observer level access. Will always read as empty. | |||||||||||||
| Spt3080CommsAccessPasswordOperator | 1.3.6.1.4.1.18086.3080.17.52 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The access password for Operator level access. Will always read as empty. | |||||||||||||
| Spt3080CommsAccessPasswordAdministrator | 1.3.6.1.4.1.18086.3080.17.53 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The access password for Administrator level access. Will always read as empty. | |||||||||||||
| Spt3080CommsSNMPServicePort | 1.3.6.1.4.1.18086.3080.17.55 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for SNMP Service. | |||||||||||||
| Spt3080CommsSNMPReadOnlyCommunity | 1.3.6.1.4.1.18086.3080.17.56 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The Read-only community string used to access the SNMP Service. | |||||||||||||
| Spt3080CommsSNMPReadWriteCommunity | 1.3.6.1.4.1.18086.3080.17.57 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The Read-Write community string used to access the SNMP Service. | |||||||||||||
| Spt3080CommsSNMPTrapCommunity | 1.3.6.1.4.1.18086.3080.17.58 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The Trap community string used when sending SNMP Traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestination | 1.3.6.1.4.1.18086.3080.17.59 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The destination IP address for the SNMP traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestinationPort | 1.3.6.1.4.1.18086.3080.17.60 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for Trap destination . | |||||||||||||
| Spt3080CommsRemoteDhcpMode | 1.3.6.1.4.1.18086.3080.17.73 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP client on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminDhcpMode | 1.3.6.1.4.1.18086.3080.17.74 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP client on this interface.
| |||||||||||||
| Spt3080CommsBackupDhcpMode | 1.3.6.1.4.1.18086.3080.17.75 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP client on this interface.
| |||||||||||||
| Spt3080CommsLocalPhysicalInterface | 1.3.6.1.4.1.18086.3080.17.80 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Physical Ethernet Interface of this (virtual) interface.
| |||||||||||||
| Spt3080CommsRemotePhysicalInterface | 1.3.6.1.4.1.18086.3080.17.81 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Physical Ethernet Interface of this (virtual) interface.
| |||||||||||||
| Spt3080CommsGbeAdminPhysicalInterface | 1.3.6.1.4.1.18086.3080.17.82 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Physical Ethernet Interface of this (virtual) interface.
| |||||||||||||
| Spt3080CommsBroadcastStormProtection | 1.3.6.1.4.1.18086.3080.17.94 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s.
| |||||||||||||
| Spt3080CommsIGMPv2UnsolicitedReportInterval | 1.3.6.1.4.1.18086.3080.17.95 | Integer32 (1..60000) | RW | ||||||||||
scalar · Integer32 (1..60000) · read-write · current The time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Count.
| |||||||||||||
| Spt3080CommsIGMPv3UnsolicitedReportInterval | 1.3.6.1.4.1.18086.3080.17.96 | Integer32 (1..60000) | RW | ||||||||||
scalar · Integer32 (1..60000) · read-write · current The time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count.
| |||||||||||||
| Spt3080CommsIGMPQueryRobustnessCount | 1.3.6.1.4.1.18086.3080.17.97 | Integer32 (2..16) | RW | ||||||||||
scalar · Integer32 (2..16) · read-write · current The Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter doesnt take effect on a network interface until it has (re-)enabled. | |||||||||||||
| Spt3080CommsSeparatedSwitchPorts | 1.3.6.1.4.1.18086.3080.17.98 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Will the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeater.
| |||||||||||||
| Spt3080CommsIGMPVersion | 1.3.6.1.4.1.18086.3080.17.99 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Select which IGMP Version to use.
| |||||||||||||
| Spt3080CommsLocalIpMulticastAddr | 1.3.6.1.4.1.18086.3080.17.100 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast address for this interface. | |||||||||||||
| Spt3080CommsLocalVlanEnable | 1.3.6.1.4.1.18086.3080.17.101 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable VLAN on this interface.
| |||||||||||||
| Spt3080CommsLocalVlanId | 1.3.6.1.4.1.18086.3080.17.102 | Integer32 (1..4095) | RW | ||||||||||
scalar · Integer32 (1..4095) · read-write · current VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. | |||||||||||||
| Spt3080CommsLocalServiceSNMP | 1.3.6.1.4.1.18086.3080.17.103 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP service on this interface.
| |||||||||||||
| Spt3080CommsLocalServiceSCPI | 1.3.6.1.4.1.18086.3080.17.104 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SCPI service on this interface.
| |||||||||||||
| Spt3080CommsLocalServiceTSoIP | 1.3.6.1.4.1.18086.3080.17.105 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable TSoIP service on this interface.
| |||||||||||||
| Spt3080CommsLocalServiceRIP | 1.3.6.1.4.1.18086.3080.17.106 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable RIP service on this interface.
| |||||||||||||
| Spt3080CommsRemoteIpMulticastAddr | 1.3.6.1.4.1.18086.3080.17.110 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast address for this interface. | |||||||||||||
| Spt3080CommsRemoteVlanEnable | 1.3.6.1.4.1.18086.3080.17.111 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable VLAN on this interface.
| |||||||||||||
| Spt3080CommsRemoteVlanId | 1.3.6.1.4.1.18086.3080.17.112 | Integer32 (1..4095) | RW | ||||||||||
scalar · Integer32 (1..4095) · read-write · current VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. | |||||||||||||
| Spt3080CommsRemoteServiceSNMP | 1.3.6.1.4.1.18086.3080.17.113 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP service on this interface.
| |||||||||||||
| Spt3080CommsRemoteServiceSCPI | 1.3.6.1.4.1.18086.3080.17.114 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SCPI service on this interface.
| |||||||||||||
| Spt3080CommsRemoteServiceTSoIP | 1.3.6.1.4.1.18086.3080.17.115 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable TSoIP service on this interface.
| |||||||||||||
| Spt3080CommsRemoteServiceWeb | 1.3.6.1.4.1.18086.3080.17.116 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable WEB (http) service on this interface.
| |||||||||||||
| Spt3080CommsRemoteEnable | 1.3.6.1.4.1.18086.3080.17.117 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable this interface.
| |||||||||||||
| Spt3080CommsRemoteServiceRIP | 1.3.6.1.4.1.18086.3080.17.118 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable RIP service on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminIpMulticastAddr | 1.3.6.1.4.1.18086.3080.17.120 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast address for this interface. | |||||||||||||
| Spt3080CommsGbeAdminVlanEnable | 1.3.6.1.4.1.18086.3080.17.121 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable VLAN on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminVlanId | 1.3.6.1.4.1.18086.3080.17.122 | Integer32 (1..4095) | RW | ||||||||||
scalar · Integer32 (1..4095) · read-write · current VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. | |||||||||||||
| Spt3080CommsGbeAdminServiceSNMP | 1.3.6.1.4.1.18086.3080.17.123 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP service on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminServiceSCPI | 1.3.6.1.4.1.18086.3080.17.124 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SCPI service on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminServiceTSoIP | 1.3.6.1.4.1.18086.3080.17.125 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable TSoIP service on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminServiceWeb | 1.3.6.1.4.1.18086.3080.17.126 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Web (http) service on this interface.
| |||||||||||||
| Spt3080CommsGbeAdminEnable | 1.3.6.1.4.1.18086.3080.17.127 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable this interface.
| |||||||||||||
| Spt3080CommsGbeAdminServiceRIP | 1.3.6.1.4.1.18086.3080.17.128 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable RIP service on this interface.
| |||||||||||||
| Spt3080CommsBackupEnable | 1.3.6.1.4.1.18086.3080.17.150 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable this interface.
| |||||||||||||
| Spt3080CommsBackupPhysicalInterface | 1.3.6.1.4.1.18086.3080.17.151 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Physical Ethernet Interface of this (virtual) interface.
| |||||||||||||
| Spt3080CommsBackupStaticIpAddr | 1.3.6.1.4.1.18086.3080.17.152 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsBackupStaticNetmask | 1.3.6.1.4.1.18086.3080.17.153 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsBackupIpMulticastAddr | 1.3.6.1.4.1.18086.3080.17.154 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast address for this interface. | |||||||||||||
| Spt3080CommsBackupVlanEnable | 1.3.6.1.4.1.18086.3080.17.155 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable VLAN on this interface.
| |||||||||||||
| Spt3080CommsBackupVlanId | 1.3.6.1.4.1.18086.3080.17.156 | Integer32 (1..4095) | RW | ||||||||||
scalar · Integer32 (1..4095) · read-write · current VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. | |||||||||||||
| Spt3080CommsBackupServiceSNMP | 1.3.6.1.4.1.18086.3080.17.157 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP service on this interface.
| |||||||||||||
| Spt3080CommsBackupServiceSCPI | 1.3.6.1.4.1.18086.3080.17.158 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SCPI service on this interface.
| |||||||||||||
| Spt3080CommsBackupServiceTSoIP | 1.3.6.1.4.1.18086.3080.17.159 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable TSoIP service on this interface.
| |||||||||||||
| Spt3080CommsBackupServiceWeb | 1.3.6.1.4.1.18086.3080.17.160 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Web (http) service on this interface.
| |||||||||||||
| Spt3080CommsBackupServiceRIP | 1.3.6.1.4.1.18086.3080.17.161 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable RIP service on this interface.
| |||||||||||||
| Spt3080CommsBackupCurrentIpAddr | 1.3.6.1.4.1.18086.3080.17.162 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP address for this interface. | |||||||||||||
| Spt3080CommsBackupCurrentNetmask | 1.3.6.1.4.1.18086.3080.17.163 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP netmask for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.18086.3080.17.170 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 1 for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.18086.3080.17.171 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 2 for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.18086.3080.17.172 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 3 for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.18086.3080.17.173 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 4 for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.18086.3080.17.174 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 5 for this interface. | |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.18086.3080.17.175 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 6 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterMode | 1.3.6.1.4.1.18086.3080.17.190 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
| |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterMode | 1.3.6.1.4.1.18086.3080.17.191 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
| |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterMode | 1.3.6.1.4.1.18086.3080.17.192 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
| |||||||||||||
| Spt3080CommsBackupIpMulticastSourceFilterMode | 1.3.6.1.4.1.18086.3080.17.193 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
| |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.18086.3080.17.200 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 1 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.18086.3080.17.201 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 2 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.18086.3080.17.202 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 3 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.18086.3080.17.203 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 4 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.18086.3080.17.204 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 5 for this interface. | |||||||||||||
| Spt3080CommsLocalIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.18086.3080.17.205 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 6 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.18086.3080.17.220 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 1 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.18086.3080.17.221 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 2 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.18086.3080.17.222 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 3 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.18086.3080.17.223 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 4 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.18086.3080.17.224 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 5 for this interface. | |||||||||||||
| Spt3080CommsRemoteIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.18086.3080.17.225 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 6 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.18086.3080.17.230 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 1 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.18086.3080.17.231 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 2 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.18086.3080.17.232 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 3 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.18086.3080.17.233 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 4 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.18086.3080.17.234 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 5 for this interface. | |||||||||||||
| Spt3080CommsGbeAdminIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.18086.3080.17.235 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 6 for this interface. | |||||||||||||
| Tpt3080CommsStaticRouteTable | 1.3.6.1.4.1.18086.3080.17.300 | NA | |||||||||||
table · not-accessible · current This table contains the static routing table entries | |||||||||||||
| Rpt3080CommsStaticRouteEntry | 1.3.6.1.4.1.18086.3080.17.300.1 | NA | |||||||||||
row · not-accessible · current An entry for the static network routing table | |||||||||||||
| Cpt3080CommsStaticRouteNO | 1.3.6.1.4.1.18086.3080.17.300.1.1 | Integer32 (1..16) | NA | ||||||||||
column · Integer32 (1..16) · not-accessible · current Unique ID for this static route entry | |||||||||||||
| Cpt3080CommsStaticRouteType | 1.3.6.1.4.1.18086.3080.17.300.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of a Route table entry.
| |||||||||||||
| Cpt3080CommsStaticRoutePrefix | 1.3.6.1.4.1.18086.3080.17.300.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used. | |||||||||||||
| Cpt3080CommsStaticRoutePrefixSize | 1.3.6.1.4.1.18086.3080.17.300.1.4 | Integer32 (0..32) | RW | ||||||||||
column · Integer32 (0..32) · read-write · current The number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used. | |||||||||||||
| Cpt3080CommsStaticRouteTarget | 1.3.6.1.4.1.18086.3080.17.300.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The target IP address for a route table entry. Only used if pt3080CommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entry will not be used. | |||||||||||||
| Cpt3080CommsStaticRoutePhysicalInterface | 1.3.6.1.4.1.18086.3080.17.300.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The Physical Ethernet Interface to use for a Route table entry. Only used when pt3080CommsStaticRouteType is physicalif(2).
| |||||||||||||
| Spt3080CommsSNMPTrapDestination2 | 1.3.6.1.4.1.18086.3080.17.419 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The destination 2 IP address for the SNMP traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestinationPort2 | 1.3.6.1.4.1.18086.3080.17.420 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for Trap destination 2. | |||||||||||||
| Spt3080CommsSNMPTrapDestination3 | 1.3.6.1.4.1.18086.3080.17.779 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The destination 3 IP address for the SNMP traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestinationPort3 | 1.3.6.1.4.1.18086.3080.17.780 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for Trap destination 3. | |||||||||||||
| Spt3080CommsSNMPTrapDestination4 | 1.3.6.1.4.1.18086.3080.17.1139 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The destination 4 IP address for the SNMP traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestinationPort4 | 1.3.6.1.4.1.18086.3080.17.1140 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for Trap destination 4. | |||||||||||||
| Spt3080CommsSNMPTrapDestination5 | 1.3.6.1.4.1.18086.3080.17.1499 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The destination 5 IP address for the SNMP traps. | |||||||||||||
| Spt3080CommsSNMPTrapDestinationPort5 | 1.3.6.1.4.1.18086.3080.17.1500 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The UDP port number used for Trap destination 5. | |||||||||||||
| Spt3080CommsPortDhcpMode | 1.3.6.1.4.1.18086.3080.17.2075 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP client on this interface.
| |||||||||||||
| Spt3080CommsPortPhysicalInterface | 1.3.6.1.4.1.18086.3080.17.2151 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Physical Ethernet Interface of this (virtual) interface.
| |||||||||||||
| Spt3080CommsPortStaticIpAddr | 1.3.6.1.4.1.18086.3080.17.2152 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP address for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsPortStaticNetmask | 1.3.6.1.4.1.18086.3080.17.2153 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. | |||||||||||||
| Spt3080CommsPortIpMulticastAddr | 1.3.6.1.4.1.18086.3080.17.2154 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast address for this interface. | |||||||||||||
| Spt3080CommsPortVlanEnable | 1.3.6.1.4.1.18086.3080.17.2155 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable VLAN on this interface.
| |||||||||||||
| Spt3080CommsPortVlanId | 1.3.6.1.4.1.18086.3080.17.2156 | Integer32 (1..4095) | RW | ||||||||||
scalar · Integer32 (1..4095) · read-write · current VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. | |||||||||||||
| Spt3080CommsPortServiceSNMP | 1.3.6.1.4.1.18086.3080.17.2157 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SNMP service on this interface.
| |||||||||||||
| Spt3080CommsPortServiceSCPI | 1.3.6.1.4.1.18086.3080.17.2158 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable SCPI service on this interface.
| |||||||||||||
| Spt3080CommsPortServiceTSoIP | 1.3.6.1.4.1.18086.3080.17.2159 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable TSoIP service on this interface.
| |||||||||||||
| Spt3080CommsPortServiceWeb | 1.3.6.1.4.1.18086.3080.17.2160 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Web (http) service on this interface.
| |||||||||||||
| Spt3080CommsPortServiceRIP | 1.3.6.1.4.1.18086.3080.17.2161 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable RIP service on this interface.
| |||||||||||||
| Spt3080CommsPortCurrentIpAddr | 1.3.6.1.4.1.18086.3080.17.2162 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP address for this interface. | |||||||||||||
| Spt3080CommsPortCurrentNetmask | 1.3.6.1.4.1.18086.3080.17.2163 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The current IP netmask for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.18086.3080.17.2170 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 1 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.18086.3080.17.2171 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 2 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.18086.3080.17.2172 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 3 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.18086.3080.17.2173 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 4 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.18086.3080.17.2174 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 5 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.18086.3080.17.2175 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Multicast Source Filter address no 6 for this interface. | |||||||||||||
| Spt3080CommsPortIpMulticastSourceFilterMode | 1.3.6.1.4.1.18086.3080.17.2193 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list.
| |||||||||||||
| Spt3080CommsPortEnable | 1.3.6.1.4.1.18086.3080.17.2500 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable this interface.
| |||||||||||||
| Npt3080Demodulator | 1.3.6.1.4.1.18086.3080.24 | ||||||||||||
| Spt3080DemodulatorFollowMode | 1.3.6.1.4.1.18086.3080.24.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the Demodulators follow mode.
| |||||||||||||
| Spt3080Demodulator1Available | 1.3.6.1.4.1.18086.3080.24.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status on the availability of Demodulator 1
| |||||||||||||
| Spt3080Demodulator1FWVersion | 1.3.6.1.4.1.18086.3080.24.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Demodulator 1 firmware version string | |||||||||||||
| Spt3080Demodulator1OutputTS | 1.3.6.1.4.1.18086.3080.24.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls which TS demodulator 1 shall output
| |||||||||||||
| Spt3080Demodulator1MerLimit | 1.3.6.1.4.1.18086.3080.24.5 | Integer32 (10..240) | RW | ||||||||||
scalar · Integer32 (10..240) · read-write · current Lower limit for MER Level
| |||||||||||||
| Spt3080Demodulator1PreVirterbiErrorRateLimit | 1.3.6.1.4.1.18086.3080.24.6 | Integer32 (1..1000000) | RW | ||||||||||
scalar · Integer32 (1..1000000) · read-write · current Upper limit for Pre-Virterbi Bit Error Rate | |||||||||||||
| Spt3080Demodulator1PostVirterbiErrorRateLimit | 1.3.6.1.4.1.18086.3080.24.7 | Integer32 (1..1000000) | RW | ||||||||||
scalar · Integer32 (1..1000000) · read-write · current Upper limit for Post-Virterbi Bit Error Rate | |||||||||||||
| Spt3080Demodulator1FelStatus | 1.3.6.1.4.1.18086.3080.24.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Received signal locked status on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1UncorrectedPackets | 1.3.6.1.4.1.18086.3080.24.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of uncorrected packets received in Demodulator 1 since boot or since counter was last cleared. | |||||||||||||
| Spt3080Demodulator1Mer | 1.3.6.1.4.1.18086.3080.24.11 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current MER level for Demodulator 1
| |||||||||||||
| Spt3080Demodulator1PreVirterbiErrorRate | 1.3.6.1.4.1.18086.3080.24.12 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Pre-Virterbi Bit Error Rate for Demodulator 1
| |||||||||||||
| Spt3080Demodulator1PostVirterbiErrorRate | 1.3.6.1.4.1.18086.3080.24.13 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Post-Virterbi Bit Error Rate for Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualGuardInterval | 1.3.6.1.4.1.18086.3080.24.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Guard Interval for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1Actualifft | 1.3.6.1.4.1.18086.3080.24.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current IFFT for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualConstellation | 1.3.6.1.4.1.18086.3080.24.16 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Constellation for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualHierarchy | 1.3.6.1.4.1.18086.3080.24.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Hierarchy for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualCodeRateHighPrio | 1.3.6.1.4.1.18086.3080.24.18 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority Code Rate for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualCodeRateLowPrio | 1.3.6.1.4.1.18086.3080.24.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority Code Rate for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualDeepInterleaver | 1.3.6.1.4.1.18086.3080.24.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Deep Interleaver for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualMpeFecHighPrio | 1.3.6.1.4.1.18086.3080.24.21 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority MPE/FEC mode for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualMpeFecLowPrio | 1.3.6.1.4.1.18086.3080.24.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Low Priority MPE/FEC mode for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualTimeSlicingHighPrio | 1.3.6.1.4.1.18086.3080.24.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority timeslicing mode for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualTimeSlicingLowPrio | 1.3.6.1.4.1.18086.3080.24.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Low Priority timeslicing mode for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator1ActualCellID | 1.3.6.1.4.1.18086.3080.24.25 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Cell ID value for the received signal on Demodulator 1 | |||||||||||||
| Spt3080Demodulator1ActualDVBHMode | 1.3.6.1.4.1.18086.3080.24.26 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current DVB-H mode for the received signal on Demodulator 1
| |||||||||||||
| Spt3080Demodulator2Available | 1.3.6.1.4.1.18086.3080.24.29 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status on the availability of Demodulator 2
| |||||||||||||
| Spt3080Demodulator2FWVersion | 1.3.6.1.4.1.18086.3080.24.30 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Demodulator 2 firmware version string | |||||||||||||
| Spt3080Demodulator2OutputTS | 1.3.6.1.4.1.18086.3080.24.31 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls which TS demodulator 2 shall output
| |||||||||||||
| Spt3080Demodulator2MerLimit | 1.3.6.1.4.1.18086.3080.24.32 | Integer32 (10..240) | RW | ||||||||||
scalar · Integer32 (10..240) · read-write · current Lower limit for MER Level
| |||||||||||||
| Spt3080Demodulator2PreVirterbiErrorRateLimit | 1.3.6.1.4.1.18086.3080.24.33 | Integer32 (1..1000000) | RW | ||||||||||
scalar · Integer32 (1..1000000) · read-write · current Upper limit for Pre-Virterbi Bit Error Rate | |||||||||||||
| Spt3080Demodulator2PostVirterbiErrorRateLimit | 1.3.6.1.4.1.18086.3080.24.34 | Integer32 (1..1000000) | RW | ||||||||||
scalar · Integer32 (1..1000000) · read-write · current Upper limit for Post-Virterbi Bit Error Rate | |||||||||||||
| Spt3080Demodulator2FelStatus | 1.3.6.1.4.1.18086.3080.24.35 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Received signal locked status on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2UncorrectedPackets | 1.3.6.1.4.1.18086.3080.24.36 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of uncorrected packets received in Demodulator 2 since boot or since counter was last cleared. | |||||||||||||
| Spt3080Demodulator2Mer | 1.3.6.1.4.1.18086.3080.24.38 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current MER level for Demodulator 2
| |||||||||||||
| Spt3080Demodulator2PreVirterbiErrorRate | 1.3.6.1.4.1.18086.3080.24.39 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Pre-Virterbi Bit Error Rate for Demodulator 2
| |||||||||||||
| Spt3080Demodulator2PostVirterbiErrorRate | 1.3.6.1.4.1.18086.3080.24.40 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Post-Virterbi Bit Error Rate for Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualGuardInterval | 1.3.6.1.4.1.18086.3080.24.41 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Guard Interval for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2Actualifft | 1.3.6.1.4.1.18086.3080.24.42 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current IFFT for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualConstellation | 1.3.6.1.4.1.18086.3080.24.43 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Constellation for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualHierarchy | 1.3.6.1.4.1.18086.3080.24.44 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Hierarchy for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualCodeRateHighPrio | 1.3.6.1.4.1.18086.3080.24.45 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority Code Rate for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualCodeRateLowPrio | 1.3.6.1.4.1.18086.3080.24.46 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority Code Rate for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualDeepInterleaver | 1.3.6.1.4.1.18086.3080.24.47 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Deep Interleaver for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualMpeFecHighPrio | 1.3.6.1.4.1.18086.3080.24.48 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority MPE/FEC mode for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualMpeFecLowPrio | 1.3.6.1.4.1.18086.3080.24.49 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Low Priority MPE/FEC mode for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualTimeSlicingHighPrio | 1.3.6.1.4.1.18086.3080.24.50 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current High Priority timeslicing mode for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualTimeSlicingLowPrio | 1.3.6.1.4.1.18086.3080.24.51 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Low Priority timeslicing mode for the received signal on Demodulator 2
| |||||||||||||
| Spt3080Demodulator2ActualCellID | 1.3.6.1.4.1.18086.3080.24.52 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current Cell ID value for the received signal on Demodulator 1 | |||||||||||||
| Spt3080Demodulator2ActualDVBHMode | 1.3.6.1.4.1.18086.3080.24.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current DVB-H mode for the received signal on Demodulator 2
| |||||||||||||
| Npt3080Precorrector | 1.3.6.1.4.1.18086.3080.25 | ||||||||||||
| Spt3080PrecorrectorLinearAdaptiveMode | 1.3.6.1.4.1.18086.3080.25.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current selection of the operational mode for the linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )
| |||||||||||||
| Spt3080PrecorrectorLinearMode | 1.3.6.1.4.1.18086.3080.25.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current selection of the operational mode for the linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMode | 1.3.6.1.4.1.18086.3080.25.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current selection of the operational mode for the non-linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI )
| |||||||||||||
| Spt3080PrecorrectorNonlinearMode | 1.3.6.1.4.1.18086.3080.25.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current selection of the operational mode for the non-linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI )
| |||||||||||||
| Spt3080PrecorrectorLastTurnAroundTime | 1.3.6.1.4.1.18086.3080.25.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PrecorrectorLastTurnAroundTime | |||||||||||||
| Spt3080PrecorrectorSecondsSinceLastUpdate | 1.3.6.1.4.1.18086.3080.25.7 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PrecorrectorSecondsSinceLastUpdate | |||||||||||||
| Spt3080PrecorrectorLinearMonitorSenseBadCount | 1.3.6.1.4.1.18086.3080.25.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of bad/invalid sense counts, made by the linear adaptive precorrector. | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorSenseBadCount | 1.3.6.1.4.1.18086.3080.25.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of bad/invalid sense counts, made by the nonlinear adaptive precorrector. | |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveAmplitudeRippleEnable | 1.3.6.1.4.1.18086.3080.25.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modes
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveGroupDelayEnable | 1.3.6.1.4.1.18086.3080.25.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable group delay as a trigger for the AUTORUN and RUNTOTARGET modes
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveLowerShoulderEnable | 1.3.6.1.4.1.18086.3080.25.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modes
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveUpperShoulderEnable | 1.3.6.1.4.1.18086.3080.25.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modes
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetHysteresis | 1.3.6.1.4.1.18086.3080.25.14 | Integer32 (0..100000) | RW | ||||||||||
scalar · Integer32 (0..100000) · read-write · current Define a adaptive target level hysteresis for the amplitude ripple
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveGroupDelayTargetHysteresis | 1.3.6.1.4.1.18086.3080.25.15 | Integer32 (0..100000) | RW | ||||||||||
scalar · Integer32 (0..100000) · read-write · current Define a adaptive target level hysteresis for the group delay
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetHysteresis | 1.3.6.1.4.1.18086.3080.25.16 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Define a adaptive target level hysteresis for the lower shoulder
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetHysteresis | 1.3.6.1.4.1.18086.3080.25.17 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Define a adaptive target level hysteresis for the upper shoulder
| |||||||||||||
| Spt3080PrecorrectorLinCleanrun | 1.3.6.1.4.1.18086.3080.25.18 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PrecorrectorLinCleanrun | |||||||||||||
| Spt3080PrecorrectorLinearMonitorIterations | 1.3.6.1.4.1.18086.3080.25.19 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of iterations made by the linear adaptive precorrector. | |||||||||||||
| Spt3080PrecorrectorLinearLoadNeutral | 1.3.6.1.4.1.18086.3080.25.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorLinearLoadNeutral
| |||||||||||||
| Spt3080PrecorrectorLinearLoadFactory | 1.3.6.1.4.1.18086.3080.25.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorLinearLoadFactory
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorSenseLevel | 1.3.6.1.4.1.18086.3080.25.22 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Level meassured at the linear sense input with offset defined by attenuation
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorSenseValid | 1.3.6.1.4.1.18086.3080.25.23 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is linear sense input information valid | |||||||||||||
| Spt3080PrecorrectorLinearMonitorStatus | 1.3.6.1.4.1.18086.3080.25.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current linear Precor state
| |||||||||||||
| Spt3080PrecorrectorLinearUpdateFactoryCurve | 1.3.6.1.4.1.18086.3080.25.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorLinearUpdateFactoryCurve
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorAmplitudeRipple | 1.3.6.1.4.1.18086.3080.25.26 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Amplitude ripple
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorGroupDelay | 1.3.6.1.4.1.18086.3080.25.27 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Group delay
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorLowerShoulderLevel | 1.3.6.1.4.1.18086.3080.25.28 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Lower shoulder level
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorUpperShoulderLevel | 1.3.6.1.4.1.18086.3080.25.29 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Upper shoulder level
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorAmplitudeRippleValid | 1.3.6.1.4.1.18086.3080.25.30 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is amplitude ripple information valid | |||||||||||||
| Spt3080PrecorrectorLinearMonitorGroupDelayValid | 1.3.6.1.4.1.18086.3080.25.31 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is group delay information valid | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorLowerShoulderValid | 1.3.6.1.4.1.18086.3080.25.32 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Lower shoulder information valid | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorUpperShoulderValid | 1.3.6.1.4.1.18086.3080.25.33 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Upper shoulder information valid | |||||||||||||
| Spt3080PrecorrectorNlinCleanrun | 1.3.6.1.4.1.18086.3080.25.34 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current PrecorrectorNlinCleanrun
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorIterations | 1.3.6.1.4.1.18086.3080.25.35 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of iterations made by the nonlinear adaptive precorrector. | |||||||||||||
| Spt3080PrecorrectorNonlinearLoadNeutral | 1.3.6.1.4.1.18086.3080.25.36 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorNonlinearLoadNeutral
| |||||||||||||
| Spt3080PrecorrectorNonlinearLoadFactory | 1.3.6.1.4.1.18086.3080.25.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorNonlinearLoadFactory
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorSenseLevel | 1.3.6.1.4.1.18086.3080.25.38 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Level meassured at the Nonlinear sense input with offset defined by attenuation
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorSenseValid | 1.3.6.1.4.1.18086.3080.25.39 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Nonlinear sense input information valid | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorStatus | 1.3.6.1.4.1.18086.3080.25.40 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Nonlinear Precor state
| |||||||||||||
| Spt3080PrecorrectorNonlinearUpdateFactoryCurve | 1.3.6.1.4.1.18086.3080.25.41 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PrecorrectorNonlinearUpdateFactoryCurve
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetLevel | 1.3.6.1.4.1.18086.3080.25.42 | Integer32 (0..10000) | RW | ||||||||||
scalar · Integer32 (0..10000) · read-write · current Define a adaptive target level for the amplitude ripple
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptiveGroupDelayTargetLevel | 1.3.6.1.4.1.18086.3080.25.43 | Integer32 (0..10000) | RW | ||||||||||
scalar · Integer32 (0..10000) · read-write · current Define a adaptive target level for the group delay
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetLevel | 1.3.6.1.4.1.18086.3080.25.44 | Integer32 (-800..0) | RW | ||||||||||
scalar · Integer32 (-800..0) · read-write · current Define a adaptive target level for the lower shoulder
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetLevel | 1.3.6.1.4.1.18086.3080.25.45 | Integer32 (-800..0) | RW | ||||||||||
scalar · Integer32 (-800..0) · read-write · current Define a adaptive target level for the upper shoulder
| |||||||||||||
| Spt3080PrecorrectorLinearSenseEnable | 1.3.6.1.4.1.18086.3080.25.46 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current By using this, it is possible to control wether to use the linear Sense Input or not.
| |||||||||||||
| Spt3080PrecorrectorLinearMonitorDiscartedIterations | 1.3.6.1.4.1.18086.3080.25.47 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of iterations discarded by the linear adaptive precorrector due to noisy signal samples. | |||||||||||||
| Spt3080PrecorrectorNonlinearSenseEnable | 1.3.6.1.4.1.18086.3080.25.48 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current By using this, it is possible to control wether to use the nonlinear Sense Input or not.
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorDiscartedIterations | 1.3.6.1.4.1.18086.3080.25.49 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples. | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorMer | 1.3.6.1.4.1.18086.3080.25.50 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current MER
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorMerValid | 1.3.6.1.4.1.18086.3080.25.51 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is MER information valid | |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorPapr | 1.3.6.1.4.1.18086.3080.25.52 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PAPR level
| |||||||||||||
| Spt3080PrecorrectorNonlinearMonitorPaprValid | 1.3.6.1.4.1.18086.3080.25.53 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Papr information valid | |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveAveraging | 1.3.6.1.4.1.18086.3080.25.54 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Choose wether or not to use averaging calulations
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMaxRfPaprEnable | 1.3.6.1.4.1.18086.3080.25.55 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable the modulator's output PAPR limiter function
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMaxRfPaprLimit | 1.3.6.1.4.1.18086.3080.25.56 | Integer32 (20..180) | RW | ||||||||||
scalar · Integer32 (20..180) · read-write · current Maximum RF PAPR Limitation
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMerTarget | 1.3.6.1.4.1.18086.3080.25.57 | Integer32 (0..800) | RW | ||||||||||
scalar · Integer32 (0..800) · read-write · current Define a target level for the MER
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMerTargetHysteresis | 1.3.6.1.4.1.18086.3080.25.58 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Define a target MER hysteresis
| |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptiveMerEnable | 1.3.6.1.4.1.18086.3080.25.59 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable MER as a trigger for the AUTORUN and RUNTOTARGET modes
| |||||||||||||
| Spt3080PrecorrectorPaprClipping | 1.3.6.1.4.1.18086.3080.25.60 | Integer32 (200..1200) | RW | ||||||||||
scalar · Integer32 (200..1200) · read-write · current set the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto COFDM signal where all peaks >2dB above average power are clipped. When feeding the output from the modulator through an amplifier the best overall performance result is normally obtained if the clipper value used by modulator clips the signal just a fraction before the amplifier would clip the signal.
| |||||||||||||
| Spt3080PrecorrectorPaprShaping | 1.3.6.1.4.1.18086.3080.25.61 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Set the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).
| |||||||||||||
| Spt3080PrecorrectorClipperAdaptiveMode | 1.3.6.1.4.1.18086.3080.25.63 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selection of the operational mode for the adaptive clipper function
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorStatus | 1.3.6.1.4.1.18086.3080.25.64 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current OptiClipper state
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorShoulderLevelLower | 1.3.6.1.4.1.18086.3080.25.65 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Lower shoulder level
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorShoulderLevelLowerValid | 1.3.6.1.4.1.18086.3080.25.66 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Lower shoulder information valid | |||||||||||||
| Spt3080PrecorrectorClipperMonitorShoulderLevelUpper | 1.3.6.1.4.1.18086.3080.25.67 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Upper shoulder level
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorShoulderLevelUpperValid | 1.3.6.1.4.1.18086.3080.25.68 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Upper shoulder information valid | |||||||||||||
| Spt3080PrecorrectorClipperMonitorMer | 1.3.6.1.4.1.18086.3080.25.69 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current MER level
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorMerValid | 1.3.6.1.4.1.18086.3080.25.70 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is MER information valid | |||||||||||||
| Spt3080PrecorrectorClipperMonitorPapr | 1.3.6.1.4.1.18086.3080.25.71 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PAPR level
| |||||||||||||
| Spt3080PrecorrectorClipperMonitorPaprValid | 1.3.6.1.4.1.18086.3080.25.72 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Is Papr information valid | |||||||||||||
| Spt3080PrecorrectorClipperMonitorIterations | 1.3.6.1.4.1.18086.3080.25.73 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of Iterations performed by the OptiClipper algorithm | |||||||||||||
| Spt3080PrecorrectorClipperMode | 1.3.6.1.4.1.18086.3080.25.74 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selection between no, static (manual) and adaptive clipper function
| |||||||||||||
| Spt3080PrecorrectorClipperAdaptive | 1.3.6.1.4.1.18086.3080.25.75 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Clipper shaped by the OptiClipper algorithm | |||||||||||||
| Spt3080PrecorrectorClipperEnable | 1.3.6.1.4.1.18086.3080.25.76 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Clipper enable
| |||||||||||||
| Spt3080PrecorrectorNonlinearAttenuation | 1.3.6.1.4.1.18086.3080.25.77 | Integer32 (-1000..1000) | RW | ||||||||||
scalar · Integer32 (-1000..1000) · read-write · current Define a attenuation level for the sense input
| |||||||||||||
| Spt3080PrecorrectorLinearAttenuation | 1.3.6.1.4.1.18086.3080.25.78 | Integer32 (-1000..1000) | RW | ||||||||||
scalar · Integer32 (-1000..1000) · read-write · current Define a attenuation level for the sense input
| |||||||||||||
| Spt3080PrecorrectorLinearAdaptive | 1.3.6.1.4.1.18086.3080.25.79 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Linear precorrection curve active in the system | |||||||||||||
| Spt3080PrecorrectorNonlinearAdaptive | 1.3.6.1.4.1.18086.3080.25.80 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Non-Linear precorrection curve active in the system | |||||||||||||
| Spt3080PrecorrectorClipperAdaptiveShaping | 1.3.6.1.4.1.18086.3080.25.81 | Integer32 (99..100) | RW | ||||||||||
scalar · Integer32 (99..100) · read-write · current Depricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER).
| |||||||||||||
| Npt3080Reception | 1.3.6.1.4.1.18086.3080.26 | ||||||||||||
| Spt3080ReceptionRFFrequency | 1.3.6.1.4.1.18086.3080.26.1 | Integer32 (30000000..954000000) | RW | ||||||||||
scalar · Integer32 (30000000..954000000) · read-write · current Defines the reception frequency for the tuner.
| |||||||||||||
| Spt3080ReceptionRFFrequencyOffset | 1.3.6.1.4.1.18086.3080.26.2 | Integer32 (-500000..500000) | RW | ||||||||||
scalar · Integer32 (-500000..500000) · read-write · current Defines the offset to be added to the reception frequency for the tuner.
| |||||||||||||
| Spt3080ReceptionIFInputPolicy | 1.3.6.1.4.1.18086.3080.26.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls RF/IF reception Policy
| |||||||||||||
| Spt3080ReceptionIFFrequency | 1.3.6.1.4.1.18086.3080.26.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the reception frequency for the tuner.
| |||||||||||||
| Spt3080ReceptionIFPolarity | 1.3.6.1.4.1.18086.3080.26.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls IF reception Polarity
| |||||||||||||
| Spt3080ReceptionRFSquelchEnable | 1.3.6.1.4.1.18086.3080.26.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the squelch function.
| |||||||||||||
| Spt3080ReceptionRFSquelchThreshold | 1.3.6.1.4.1.18086.3080.26.7 | Integer32 (-800..-70) | RW | ||||||||||
scalar · Integer32 (-800..-70) · read-write · current Defines the Squelch function threshold.
| |||||||||||||
| Spt3080ReceptionRFSquelchHysteresis | 1.3.6.1.4.1.18086.3080.26.8 | Integer32 (10..500) | RW | ||||||||||
scalar · Integer32 (10..500) · read-write · current Defines the Squelch function Hysteresis.
| |||||||||||||
| Spt3080ReceptionGainControl | 1.3.6.1.4.1.18086.3080.26.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the gain function mode.
| |||||||||||||
| Spt3080ReceptionGainManualValue | 1.3.6.1.4.1.18086.3080.26.10 | Integer32 (0..700) | RW | ||||||||||
scalar · Integer32 (0..700) · read-write · current Defines manual gain value.
| |||||||||||||
| Spt3080ReceptionGainLimitEnable | 1.3.6.1.4.1.18086.3080.26.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the Reception RF Gain limit function.
| |||||||||||||
| Spt3080ReceptionGainLimit | 1.3.6.1.4.1.18086.3080.26.12 | Integer32 (200..700) | RW | ||||||||||
scalar · Integer32 (200..700) · read-write · current Defines gain limit value.
| |||||||||||||
| Spt3080ReceptionGainCurrent | 1.3.6.1.4.1.18086.3080.26.13 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current total gain.
| |||||||||||||
| Spt3080ReceptionIFRFtoIFHoldoverDelay | 1.3.6.1.4.1.18086.3080.26.18 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current The holdover delay for switching reception from RF to IF input.
| |||||||||||||
| Spt3080ReceptionIFIFtoRFHoldoverDelay | 1.3.6.1.4.1.18086.3080.26.19 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current The holdover delay for switching reception from IF to RF input.
| |||||||||||||
| Spt3080ReceptionIFInput | 1.3.6.1.4.1.18086.3080.26.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Shows the current RF/IF input selected
| |||||||||||||
| Spt3080ReceptionRFInputLevel | 1.3.6.1.4.1.18086.3080.26.21 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current RF input level on the tuner.
| |||||||||||||
| Spt3080ReceptionIFInputLevel | 1.3.6.1.4.1.18086.3080.26.22 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Shows the current IF input level
| |||||||||||||
| Spt3080ReceptionBandwidth | 1.3.6.1.4.1.18086.3080.26.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls reception bandwidth
| |||||||||||||
| Spt3080ReceptionRFPolarity | 1.3.6.1.4.1.18086.3080.26.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls RF reception Polarity
| |||||||||||||
| Spt3080ReceptionRFInputLevelHysteresis | 1.3.6.1.4.1.18086.3080.26.25 | Integer32 (10..500) | RW | ||||||||||
scalar · Integer32 (10..500) · read-write · current Defines the Input Level Hysteresis.
| |||||||||||||
| Spt3080ReceptionRFInputLevelThreshold | 1.3.6.1.4.1.18086.3080.26.26 | Integer32 (-8000..-700) | RW | ||||||||||
scalar · Integer32 (-8000..-700) · read-write · current Defines the Input level threshold.
| |||||||||||||
| Spt3080ReceptionAGCMode | 1.3.6.1.4.1.18086.3080.26.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the AGC function mode.
| |||||||||||||
| Spt3080ReceptionAGCHysteresis | 1.3.6.1.4.1.18086.3080.26.31 | Integer32 (0..200) | RW | ||||||||||
scalar · Integer32 (0..200) · read-write · current Defines the AGC function Hysteresis.
| |||||||||||||
| Spt3080ReceptionRFTrackingFilterEnable | 1.3.6.1.4.1.18086.3080.26.35 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the Reception RF Tracking Filter.
| |||||||||||||
| Spt3080ReceptionRFifLevel | 1.3.6.1.4.1.18086.3080.26.36 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The current if level from the tuner.
| |||||||||||||
| Spt3080ReceptionRFNominalInputLevel | 1.3.6.1.4.1.18086.3080.26.37 | Integer32 (-400..100) | RW | ||||||||||
scalar · Integer32 (-400..100) · read-write · current The nominal input level on the tuner. The dynamic range of the tuner is from 20dB below nominal level to nominal level
| |||||||||||||
| Spt3080ReceptionTunerHWVersion | 1.3.6.1.4.1.18086.3080.26.40 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW version. | |||||||||||||
| Spt3080ReceptionTunerHWType | 1.3.6.1.4.1.18086.3080.26.41 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW type. | |||||||||||||
| Spt3080ReceptionTunerHWID | 1.3.6.1.4.1.18086.3080.26.42 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW ID. | |||||||||||||
| Spt3080ReceptionTunerHWSerialNumber | 1.3.6.1.4.1.18086.3080.26.43 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW Serial Number. | |||||||||||||
| Spt3080ReceptionTunerHWCalibrationDate | 1.3.6.1.4.1.18086.3080.26.44 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW Calibration Date. | |||||||||||||
| Spt3080ReceptionTunerHWCalibrationDataVersion | 1.3.6.1.4.1.18086.3080.26.45 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW Calibration Data Version. | |||||||||||||
| Spt3080ReceptionTunerHWCalibrationSWVersion | 1.3.6.1.4.1.18086.3080.26.46 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The tuner HW Calibration SW Version. | |||||||||||||
| Npt3080Backplane | 1.3.6.1.4.1.18086.3080.27 | ||||||||||||
| Spt3080BackplanePolarityHardMute | 1.3.6.1.4.1.18086.3080.27.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the polarity of the Hard Mute input pin on the PTT2 backplane.
| |||||||||||||
| Spt3080BackplanePolarityRFFail | 1.3.6.1.4.1.18086.3080.27.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the polarity of the RF Fail output pin on the PTT2 backplane.
| |||||||||||||
| Npt3080ASI | 1.3.6.1.4.1.18086.3080.30 | ||||||||||||
| Spt3080ASIInput1SyncTimeout | 1.3.6.1.4.1.18086.3080.30.1 | Integer32 (1..250) | RW | ||||||||||
scalar · Integer32 (1..250) · read-write · current Specifies the maximum time accepted between received TS packages.
| |||||||||||||
| Spt3080ASIInput1DataErrorLimit | 1.3.6.1.4.1.18086.3080.30.2 | Integer32 (0..20000) | RW | ||||||||||
scalar · Integer32 (0..20000) · read-write · current Specifies the alarm limit for date error rate.
| |||||||||||||
| Spt3080ASIInput1SyncStatus | 1.3.6.1.4.1.18086.3080.30.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the sync detector
| |||||||||||||
| Spt3080ASIInput1SyncSignal | 1.3.6.1.4.1.18086.3080.30.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the sync detector signal type
| |||||||||||||
| Spt3080ASIInput1SyncTSSize | 1.3.6.1.4.1.18086.3080.30.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current TS packet size determined by the sync detector
| |||||||||||||
| Spt3080ASIInput1LineErrors | 1.3.6.1.4.1.18086.3080.30.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Counts the number of line errors including IDLE stuffing.
| |||||||||||||
| Spt3080ASIInput1LineRate | 1.3.6.1.4.1.18086.3080.30.7 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current line rate
| |||||||||||||
| Spt3080ASIInput1LineErrorRate | 1.3.6.1.4.1.18086.3080.30.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current line error rate
| |||||||||||||
| Spt3080ASIInput1DataErrors | 1.3.6.1.4.1.18086.3080.30.9 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Counts the number of data errors excluding IDLE stuffing.
| |||||||||||||
| Spt3080ASIInput1DataRate | 1.3.6.1.4.1.18086.3080.30.10 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current data rate
| |||||||||||||
| Spt3080ASIInput1DataErrorRate | 1.3.6.1.4.1.18086.3080.30.11 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current data error rate
| |||||||||||||
| Spt3080ASIInput1ClearErrorCounters | 1.3.6.1.4.1.18086.3080.30.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clear all error counters and reset all rates
| |||||||||||||
| Spt3080ASIInput2SyncTimeout | 1.3.6.1.4.1.18086.3080.30.51 | Integer32 (1..250) | RW | ||||||||||
scalar · Integer32 (1..250) · read-write · current Specifies the maximum time accepted between received TS packages.
| |||||||||||||
| Spt3080ASIInput2DataErrorLimit | 1.3.6.1.4.1.18086.3080.30.52 | Integer32 (0..20000) | RW | ||||||||||
scalar · Integer32 (0..20000) · read-write · current Specifies the alarm limit for date error rate.
| |||||||||||||
| Spt3080ASIInput2SyncStatus | 1.3.6.1.4.1.18086.3080.30.53 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the sync detector
| |||||||||||||
| Spt3080ASIInput2SyncSignal | 1.3.6.1.4.1.18086.3080.30.54 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current state of the sync detector signal type
| |||||||||||||
| Spt3080ASIInput2SyncTSSize | 1.3.6.1.4.1.18086.3080.30.55 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current TS packet size determined by the sync detector
| |||||||||||||
| Spt3080ASIInput2LineErrors | 1.3.6.1.4.1.18086.3080.30.56 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Counts the number of line errors including IDLE stuffing.
| |||||||||||||
| Spt3080ASIInput2LineRate | 1.3.6.1.4.1.18086.3080.30.57 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current line rate
| |||||||||||||
| Spt3080ASIInput2LineErrorRate | 1.3.6.1.4.1.18086.3080.30.58 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current line error rate
| |||||||||||||
| Spt3080ASIInput2DataErrors | 1.3.6.1.4.1.18086.3080.30.59 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Counts the number of data errors excluding IDLE stuffing.
| |||||||||||||
| Spt3080ASIInput2DataRate | 1.3.6.1.4.1.18086.3080.30.60 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current data rate
| |||||||||||||
| Spt3080ASIInput2DataErrorRate | 1.3.6.1.4.1.18086.3080.30.61 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current data error rate
| |||||||||||||
| Spt3080ASIInput2ClearErrorCounters | 1.3.6.1.4.1.18086.3080.30.62 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clear all error counters and reset all rates
| |||||||||||||
| Npt3080Notifs | 1.3.6.1.4.1.18086.3080.64 | ||||||||||||
| Npt3080Notif | 1.3.6.1.4.1.18086.3080.64.0 | ||||||||||||
| !pt3080NotifModulatorAlarm | 1.3.6.1.4.1.18086.3080.64.0.3 | ||||||||||||
notification · current Modulator Alarms | |||||||||||||
| !pt3080NotifTSPrimaryAlarm | 1.3.6.1.4.1.18086.3080.64.0.5 | ||||||||||||
notification · current ASI TS Primary Alarms | |||||||||||||
| !pt3080NotifTSSecondaryAlarm | 1.3.6.1.4.1.18086.3080.64.0.6 | ||||||||||||
notification · current ASI TS Secondary Alarms | |||||||||||||
| !pt3080NotifSFNAlarm | 1.3.6.1.4.1.18086.3080.64.0.7 | ||||||||||||
| !pt3080NotifRefenceClockAlarm | 1.3.6.1.4.1.18086.3080.64.0.8 | ||||||||||||
notification · current Reference Alarms | |||||||||||||
| !pt3080NotifRFAlarm | 1.3.6.1.4.1.18086.3080.64.0.9 | ||||||||||||
| !pt3080NotifGNSSAlarm | 1.3.6.1.4.1.18086.3080.64.0.10 | ||||||||||||
| !pt3080NotifTSoIPAlarm | 1.3.6.1.4.1.18086.3080.64.0.12 | ||||||||||||
| !pt3080NotifExternalAlarm | 1.3.6.1.4.1.18086.3080.64.0.13 | ||||||||||||
notification · current External Alarms | |||||||||||||
| !pt3080NotifHWMonitorAlarm | 1.3.6.1.4.1.18086.3080.64.0.14 | ||||||||||||
notification · current HW Monitor Alarms | |||||||||||||
| !pt3080NotifCommAlarm | 1.3.6.1.4.1.18086.3080.64.0.15 | ||||||||||||
notification · current Communications Alarms | |||||||||||||
| !pt3080NotifASIAlarm | 1.3.6.1.4.1.18086.3080.64.0.16 | ||||||||||||
| !pt3080NotifInternalAlarm | 1.3.6.1.4.1.18086.3080.64.0.18 | ||||||||||||
notification · current Internal Alarms | |||||||||||||
| !pt3080NotifTSPrimarySyncLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.21 | ||||||||||||
notification · current TS Primary Sync Loss | |||||||||||||
| !pt3080NotifTSPrimarySyncErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.22 | ||||||||||||
notification · current TS Primary Sync Error | |||||||||||||
| !pt3080NotifTSPrimaryPCRErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.23 | ||||||||||||
notification · current TS Primary PCR Error | |||||||||||||
| !pt3080NotifTSPrimaryPATLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.24 | ||||||||||||
notification · current TS Primary PAT Loss | |||||||||||||
| !pt3080NotifTSPrimaryTSIDWrongAlarm | 1.3.6.1.4.1.18086.3080.64.0.25 | ||||||||||||
notification · current TS Primary Transport Stream ID | |||||||||||||
| !pt3080NotifTSPrimaryNWIDWrongAlarm | 1.3.6.1.4.1.18086.3080.64.0.26 | ||||||||||||
notification · current TS Primary Network ID | |||||||||||||
| !pt3080NotifTSPrimaryStuffingRateExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.27 | ||||||||||||
notification · current TS Primary Stuffing Rate | |||||||||||||
| !pt3080NotifTSPrimaryBufferPoolExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.28 | ||||||||||||
notification · current TS Primary Buffer Pool | |||||||||||||
| !pt3080NotifTSPrimarySTSJitterExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.29 | ||||||||||||
notification · current TS Primary STS Jitter | |||||||||||||
| !pt3080NotifTSPrimaryMIPDataMissingAlarm | 1.3.6.1.4.1.18086.3080.64.0.30 | ||||||||||||
notification · current TS Primary MIP Data Missing | |||||||||||||
| !pt3080NotifTSPrimaryMIPPriorityBadAlarm | 1.3.6.1.4.1.18086.3080.64.0.31 | ||||||||||||
notification · current TS Primary Bad Priority in MIP | |||||||||||||
| !pt3080NotifTSSecondarySyncLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.32 | ||||||||||||
notification · current TS Secondary Sync Loss | |||||||||||||
| !pt3080NotifTSSecondarySyncErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.33 | ||||||||||||
notification · current TS Secondary Sync Error | |||||||||||||
| !pt3080NotifTSSecondaryPCRErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.34 | ||||||||||||
notification · current TS Secondary PCR Error | |||||||||||||
| !pt3080NotifTSSecondaryPATLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.35 | ||||||||||||
notification · current TS Secondary PAT Loss | |||||||||||||
| !pt3080NotifTSSecondaryTSIDWrongAlarm | 1.3.6.1.4.1.18086.3080.64.0.36 | ||||||||||||
notification · current TS Secondary Transport Stream ID | |||||||||||||
| !pt3080NotifTSSecondaryNWIDWrongAlarm | 1.3.6.1.4.1.18086.3080.64.0.37 | ||||||||||||
notification · current TS Secondary Network ID | |||||||||||||
| !pt3080NotifTSSecondaryStuffingRateExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.38 | ||||||||||||
notification · current TS Secondary Stuffing Rate | |||||||||||||
| !pt3080NotifTSSecondaryBufferPoolExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.39 | ||||||||||||
notification · current TS Secondary Buffer Pool | |||||||||||||
| !pt3080NotifTSSecondarySTSJitterExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.40 | ||||||||||||
notification · current TS Secondary STS Jitter | |||||||||||||
| !pt3080NotifTSSecondaryMIPDataMissingAlarm | 1.3.6.1.4.1.18086.3080.64.0.41 | ||||||||||||
notification · current TS Secondary MIP Data Missing | |||||||||||||
| !pt3080NotifTSSecondaryMIPPriorityBadAlarm | 1.3.6.1.4.1.18086.3080.64.0.42 | ||||||||||||
notification · current TS Secondary Bad Priority in MIP | |||||||||||||
| !pt3080NotifRFOverloadProtectionAlarm | 1.3.6.1.4.1.18086.3080.64.0.44 | ||||||||||||
notification · current Overload Protection | |||||||||||||
| !pt3080NotifCommeth0Alarm | 1.3.6.1.4.1.18086.3080.64.0.55 | ||||||||||||
notification · current ETH0 Conn. State | |||||||||||||
| !pt3080NotifCommeth1Alarm | 1.3.6.1.4.1.18086.3080.64.0.56 | ||||||||||||
notification · current ETH1 Conn. State | |||||||||||||
| !pt3080NotifCommeth2Alarm | 1.3.6.1.4.1.18086.3080.64.0.57 | ||||||||||||
notification · current ETH2 Conn. State | |||||||||||||
| !pt3080NotifCommeth3Alarm | 1.3.6.1.4.1.18086.3080.64.0.58 | ||||||||||||
notification · current ETH3 Conn. State | |||||||||||||
| !pt3080NotifCommeth4Alarm | 1.3.6.1.4.1.18086.3080.64.0.59 | ||||||||||||
notification · current ETH4 Conn. State | |||||||||||||
| !pt3080NotifExternalInput1Alarm | 1.3.6.1.4.1.18086.3080.64.0.72 | ||||||||||||
notification · current Alarm Input 1 | |||||||||||||
| !pt3080NotifExternalInput2Alarm | 1.3.6.1.4.1.18086.3080.64.0.73 | ||||||||||||
notification · current Alarm Input 2 | |||||||||||||
| !pt3080NotifExternalInput3Alarm | 1.3.6.1.4.1.18086.3080.64.0.74 | ||||||||||||
notification · current Alarm Input 3 | |||||||||||||
| !pt3080NotifExternalInput4Alarm | 1.3.6.1.4.1.18086.3080.64.0.75 | ||||||||||||
notification · current Alarm Input 4 | |||||||||||||
| !pt3080NotifRefenceClockExtern1PPSLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.76 | ||||||||||||
notification · current Ext. 1PPS Loss | |||||||||||||
| !pt3080NotifRefenceClockIntern1PPSLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.77 | ||||||||||||
notification · current Int. 10MHz Loss | |||||||||||||
| !pt3080NotifRefenceClockExtern10MHzLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.78 | ||||||||||||
notification · current Ext. 10MHz Loss | |||||||||||||
| !pt3080NotifRFAlcRangeAlarm | 1.3.6.1.4.1.18086.3080.64.0.79 | ||||||||||||
| !pt3080NotifSFNResyncAlarm | 1.3.6.1.4.1.18086.3080.64.0.80 | ||||||||||||
notification · current SFN Resync Error | |||||||||||||
| !pt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.81 | ||||||||||||
notification · current Primary SFN Max Delay + Offset OOR | |||||||||||||
| !pt3080NotifSFNTSPrimaryNetworkDelayExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.82 | ||||||||||||
notification · current Primary SFN NW Delay Greater Than Max | |||||||||||||
| !pt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.84 | ||||||||||||
notification · current Secondary SFN Max. Delay + Offset OOR | |||||||||||||
| !pt3080NotifSFNTSSecondaryNetworkDelayExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.85 | ||||||||||||
notification · current Secondary SFN NW Delay Greater Than Max | |||||||||||||
| !pt3080NotifRFLevelOutOfRangeAlarm | 1.3.6.1.4.1.18086.3080.64.0.87 | ||||||||||||
notification · current RF Level Out of Range | |||||||||||||
| !pt3080NotifRefenceClockNTPSyncLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.89 | ||||||||||||
notification · current NTP Sync Loss | |||||||||||||
| !pt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarm | 1.3.6.1.4.1.18086.3080.64.0.92 | ||||||||||||
notification · current Primary Delay Margin too Small for Seamless and Holdover | |||||||||||||
| !pt3080NotifSFNTSPrimaryMIPConfigErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.93 | ||||||||||||
notification · current Primary SFN and MIP Config Differ | |||||||||||||
| !pt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarm | 1.3.6.1.4.1.18086.3080.64.0.94 | ||||||||||||
notification · current Secondary Delay Margin too Small for Seamless and Holdover | |||||||||||||
| !pt3080NotifSFNTSSecondaryMIPConfigErrorAlarm | 1.3.6.1.4.1.18086.3080.64.0.95 | ||||||||||||
notification · current Secondary SFN and MIP Config Differ | |||||||||||||
| !pt3080NotifGNSSUnlockedAlarm | 1.3.6.1.4.1.18086.3080.64.0.98 | ||||||||||||
notification · current GNSS Unlocked | |||||||||||||
| !pt3080NotifGNSSAntennaFaultAlarm | 1.3.6.1.4.1.18086.3080.64.0.107 | ||||||||||||
notification · current GNSS Antenna Fault | |||||||||||||
| !pt3080NotifGNSSHoldOverAlarm | 1.3.6.1.4.1.18086.3080.64.0.108 | ||||||||||||
notification · current GNSS Holdover | |||||||||||||
| !pt3080NotifRefenceClockExternal10MHzHoldOverAlarm | 1.3.6.1.4.1.18086.3080.64.0.109 | ||||||||||||
notification · current Ext. 10MHz Ref Holdover | |||||||||||||
| !pt3080NotifRefenceClockExternal1PPSHoldOverAlarm | 1.3.6.1.4.1.18086.3080.64.0.110 | ||||||||||||
notification · current Ext. 1PPS Ref Holdover | |||||||||||||
| !pt3080NotifASIASI1ErrorRateEceeededAlarm | 1.3.6.1.4.1.18086.3080.64.0.113 | ||||||||||||
notification · current ASI-IN1 Error Rate | |||||||||||||
| !pt3080NotifASIASI2ErrorRateEceeededAlarm | 1.3.6.1.4.1.18086.3080.64.0.114 | ||||||||||||
notification · current ASI-IN2 Error Rate | |||||||||||||
| !pt3080NotifTSoIPRx1PackageErrorRationExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.115 | ||||||||||||
notification · current TSoIP RX1 Package Error Ratio Exceeded | |||||||||||||
| !pt3080NotifTSoIPRx2PackageErrorRationExceededAlarm | 1.3.6.1.4.1.18086.3080.64.0.117 | ||||||||||||
notification · current TSoIP RX2 Package Error Ratio Exceeded | |||||||||||||
| !pt3080NotifTSoIPRx1SyncLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.119 | ||||||||||||
notification · current TSoIP RX1 Signal Loss | |||||||||||||
| !pt3080NotifTSoIPRx2SyncLossAlarm | 1.3.6.1.4.1.18086.3080.64.0.121 | ||||||||||||
notification · current TSoIP RX2 Signal Loss | |||||||||||||
| !pt3080NotifInternalBackplaneAlarm | 1.3.6.1.4.1.18086.3080.64.0.129 | ||||||||||||
notification · current Backplane Status | |||||||||||||
| !pt3080NotifInternalReferenceClockAlarm | 1.3.6.1.4.1.18086.3080.64.0.132 | ||||||||||||
notification · current Reference Status | |||||||||||||
| !pt3080NotifInternalUpConverterAlarm | 1.3.6.1.4.1.18086.3080.64.0.134 | ||||||||||||
notification · current Upconverter Status | |||||||||||||
| !pt3080NotifInternalDownConverterAlarm | 1.3.6.1.4.1.18086.3080.64.0.135 | ||||||||||||
notification · current Downconverter Status | |||||||||||||
| !pt3080NotifInternalMainboardAlarm | 1.3.6.1.4.1.18086.3080.64.0.136 | ||||||||||||
notification · current Main board Status | |||||||||||||
| !pt3080NotifInternalBatteryAlarm | 1.3.6.1.4.1.18086.3080.64.0.137 | ||||||||||||
notification · current Main Board Battery | |||||||||||||
| !pt3080NotifInternalFirmware1Alarm | 1.3.6.1.4.1.18086.3080.64.0.139 | ||||||||||||
notification · current Firmware 1 Status | |||||||||||||
| !pt3080NotifInternalGNSSAlarm | 1.3.6.1.4.1.18086.3080.64.0.142 | ||||||||||||
| !pt3080NotifInternalSatelliteAlarm | 1.3.6.1.4.1.18086.3080.64.0.143 | ||||||||||||
notification · current Satrecv Status | |||||||||||||
| !pt3080NotifInternalEthAlarm | 1.3.6.1.4.1.18086.3080.64.0.146 | ||||||||||||
notification · current EtherNet Port Failure | |||||||||||||
| !pt3080NotifHWMonitorFPGAAlarm | 1.3.6.1.4.1.18086.3080.64.0.156 | ||||||||||||
notification · current Main Board FPGA Temperature | |||||||||||||
| !pt3080NotifHWMonitorMainBoardCPUTemperatureAlarm | 1.3.6.1.4.1.18086.3080.64.0.157 | ||||||||||||
notification · current Main Board CPU Temperature | |||||||||||||
| !pt3080NotifHWMonitorMainBoardTemperatureAlarm | 1.3.6.1.4.1.18086.3080.64.0.158 | ||||||||||||
notification · current Main Board Temperature | |||||||||||||
| !pt3080NotifHWMonitorLeftFanAlarm | 1.3.6.1.4.1.18086.3080.64.0.159 | ||||||||||||
notification · current Left Chassis Fan | |||||||||||||
| !pt3080NotifHWMonitorRightFan2Alarm | 1.3.6.1.4.1.18086.3080.64.0.160 | ||||||||||||
notification · current Right Chassis Fan | |||||||||||||
| !pt3080NotifHWMonitorBackplaneTemperatureAlarm | 1.3.6.1.4.1.18086.3080.64.0.162 | ||||||||||||
notification · current Backplane Temperature | |||||||||||||
| !pt3080NotifTSPrimaryInputTSHoldOverAlarm | 1.3.6.1.4.1.18086.3080.64.0.180 | ||||||||||||
notification · current Input TS Holdover | |||||||||||||
| !pt3080NotifInternalPLLUnlockedAlarm | 1.3.6.1.4.1.18086.3080.64.0.182 | ||||||||||||
notification · current PLL Out of Lock | |||||||||||||
| !pt3080NotifExternalInput5Alarm | 1.3.6.1.4.1.18086.3080.64.0.183 | ||||||||||||
notification · current Alarm Input 5 | |||||||||||||
| !pt3080NotifSFNUntimedModeAlarm | 1.3.6.1.4.1.18086.3080.64.0.184 | ||||||||||||
notification · current SFN Mode Untimed | |||||||||||||
| !pt3080NotifSFNFreeRunningModeAlarm | 1.3.6.1.4.1.18086.3080.64.0.185 | ||||||||||||
notification · current SFN Mode Free Running | |||||||||||||
| !pt3080NotifExternalInput6Alarm | 1.3.6.1.4.1.18086.3080.64.0.186 | ||||||||||||
notification · current Alarm Input 6 | |||||||||||||
| !pt3080NotifExternalInput7Alarm | 1.3.6.1.4.1.18086.3080.64.0.187 | ||||||||||||
notification · current Alarm Input 7 | |||||||||||||
| !pt3080NotifExternalInput8Alarm | 1.3.6.1.4.1.18086.3080.64.0.188 | ||||||||||||
notification · current Alarm Input 8 | |||||||||||||
| !pt3080NotifTSPrimaryDelayMarginAlarm | 1.3.6.1.4.1.18086.3080.64.0.190 | ||||||||||||
notification · current TS Primary Delay Margin | |||||||||||||
| !pt3080NotifTSSecondaryDelayMarginAlarm | 1.3.6.1.4.1.18086.3080.64.0.191 | ||||||||||||
notification · current TS Secondary Delay Margin | |||||||||||||
| Spt3080NotifMessage | 1.3.6.1.4.1.18086.3080.64.1 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current The current alarm notification message | |||||||||||||
| Spt3080NotifState | 1.3.6.1.4.1.18086.3080.64.2 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current The current alarm notification state
| |||||||||||||
| Spt3080NotifLocalTime | 1.3.6.1.4.1.18086.3080.64.3 | DateAndTime | AN | ||||||||||
scalar · DateAndTime · accessible-for-notify · current The time the current alarm notification state changed | |||||||||||||
| Npt3080Conformance | 1.3.6.1.4.1.18086.3080.100 | ||||||||||||
| Npt3080Compliances | 1.3.6.1.4.1.18086.3080.100.1 | ||||||||||||
| Mpt3080Compliance | 1.3.6.1.4.1.18086.3080.100.1.1 | ||||||||||||
compliance · current The compliance statement for systems supporting the this MIB.
| |||||||||||||
| Npt3080Groups | 1.3.6.1.4.1.18086.3080.100.2 | ||||||||||||
| Gpt3080SystemGroup | 1.3.6.1.4.1.18086.3080.100.2.1 | ||||||||||||
group · current System group
| |||||||||||||
| Gpt3080ModeGroup | 1.3.6.1.4.1.18086.3080.100.2.2 | ||||||||||||
group · current DVB-T Mode group
| |||||||||||||
| Gpt3080InputGroup | 1.3.6.1.4.1.18086.3080.100.2.3 | ||||||||||||
group · current Input group
| |||||||||||||
| Gpt3080OutputGroup | 1.3.6.1.4.1.18086.3080.100.2.4 | ||||||||||||
group · current Output group
| |||||||||||||
| Gpt3080GpsGroup | 1.3.6.1.4.1.18086.3080.100.2.7 | ||||||||||||
group · current GPS group
| |||||||||||||
| Gpt3080ChannelFilterGroup | 1.3.6.1.4.1.18086.3080.100.2.8 | ||||||||||||
| Gpt3080TSoIPGroup | 1.3.6.1.4.1.18086.3080.100.2.10 | ||||||||||||
group · current TSoIP group
| |||||||||||||
| Gpt3080MonitorGroup | 1.3.6.1.4.1.18086.3080.100.2.12 | ||||||||||||
group · current Signal monitor group
| |||||||||||||
| Gpt3080TestGroup | 1.3.6.1.4.1.18086.3080.100.2.13 | ||||||||||||
group · current Test Signal group | |||||||||||||
| Gpt3080AlarmGroup | 1.3.6.1.4.1.18086.3080.100.2.14 | ||||||||||||
group · current Alarm group
| |||||||||||||
| Gpt3080PresetGroup | 1.3.6.1.4.1.18086.3080.100.2.15 | ||||||||||||
| Gpt3080EventlogGroup | 1.3.6.1.4.1.18086.3080.100.2.16 | ||||||||||||
group · current Eventlog group | |||||||||||||
| Gpt3080CommsGroup | 1.3.6.1.4.1.18086.3080.100.2.17 | ||||||||||||
group · current Data network communications group
| |||||||||||||
| Gpt3080DemodulatorGroup | 1.3.6.1.4.1.18086.3080.100.2.24 | ||||||||||||
group · current Demodulator group
| |||||||||||||
| Gpt3080PrecorrectorGroup | 1.3.6.1.4.1.18086.3080.100.2.25 | ||||||||||||
group · current Precorrector group
| |||||||||||||
| Gpt3080ReceptionGroup | 1.3.6.1.4.1.18086.3080.100.2.26 | ||||||||||||
group · current Reception group
| |||||||||||||
| Gpt3080BackplaneGroup | 1.3.6.1.4.1.18086.3080.100.2.27 | ||||||||||||
| Gpt3080ASIGroup | 1.3.6.1.4.1.18086.3080.100.2.30 | ||||||||||||
group · current ASI media group
| |||||||||||||
| Gpt3080NotifsGroup | 1.3.6.1.4.1.18086.3080.100.2.64 | ||||||||||||
group · current Notification objects group | |||||||||||||
| Npt3080Agent | 1.3.6.1.4.1.18086.3080.100.3 | ||||||||||||
node · current PT2080 DVB-T/H Modulator agent | |||||||||||||
| Npt3080NotificationsGroups | 1.3.6.1.4.1.18086.3080.100.4 | ||||||||||||
| Gpt3080NotifGroupModulatorAlarm | 1.3.6.1.4.1.18086.3080.100.4.3 | ||||||||||||
| Gpt3080NotifGroupTSPrimaryAlarm | 1.3.6.1.4.1.18086.3080.100.4.5 | ||||||||||||
group · current ASI TS Primary Alarms
| |||||||||||||
| Gpt3080NotifGroupTSSecondaryAlarm | 1.3.6.1.4.1.18086.3080.100.4.6 | ||||||||||||
group · current ASI TS Secondary Alarms
| |||||||||||||
| Gpt3080NotifGroupSFNAlarm | 1.3.6.1.4.1.18086.3080.100.4.7 | ||||||||||||
group · current SFN Alarms
| |||||||||||||
| Gpt3080NotifGroupRefenceClockAlarm | 1.3.6.1.4.1.18086.3080.100.4.8 | ||||||||||||
group · current Reference Alarms
| |||||||||||||
| Gpt3080NotifGroupRFAlarm | 1.3.6.1.4.1.18086.3080.100.4.9 | ||||||||||||
group · current RF Alarms | |||||||||||||
| Gpt3080NotifGroupGNSSAlarm | 1.3.6.1.4.1.18086.3080.100.4.10 | ||||||||||||
group · current GNSS Alarms | |||||||||||||
| Gpt3080NotifGroupTSoIPAlarm | 1.3.6.1.4.1.18086.3080.100.4.12 | ||||||||||||
| Gpt3080NotifGroupExternalAlarm | 1.3.6.1.4.1.18086.3080.100.4.13 | ||||||||||||
group · current External Alarms | |||||||||||||
| Gpt3080NotifGroupHWMonitorAlarm | 1.3.6.1.4.1.18086.3080.100.4.14 | ||||||||||||
group · current HW Monitor Alarms | |||||||||||||
| Gpt3080NotifGroupCommAlarm | 1.3.6.1.4.1.18086.3080.100.4.15 | ||||||||||||
group · current Communications Alarms | |||||||||||||
| Gpt3080NotifGroupASIAlarm | 1.3.6.1.4.1.18086.3080.100.4.16 | ||||||||||||
group · current ASI Alarms | |||||||||||||
| Gpt3080NotifGroupInternalAlarm | 1.3.6.1.4.1.18086.3080.100.4.18 | ||||||||||||
group · current Internal Alarms
| |||||||||||||
Traps / Notifications
- pt3080NotifASIASI1ErrorRateEceeededAlarm
1.3.6.1.4.1.18086.3080.64.0.113 - pt3080NotifASIASI2ErrorRateEceeededAlarm
1.3.6.1.4.1.18086.3080.64.0.114 - pt3080NotifASIAlarm
1.3.6.1.4.1.18086.3080.64.0.16 - pt3080NotifCommAlarm
1.3.6.1.4.1.18086.3080.64.0.15 - pt3080NotifCommeth0Alarm
1.3.6.1.4.1.18086.3080.64.0.55 - pt3080NotifCommeth1Alarm
1.3.6.1.4.1.18086.3080.64.0.56 - pt3080NotifCommeth2Alarm
1.3.6.1.4.1.18086.3080.64.0.57 - pt3080NotifCommeth3Alarm
1.3.6.1.4.1.18086.3080.64.0.58 - pt3080NotifCommeth4Alarm
1.3.6.1.4.1.18086.3080.64.0.59 - pt3080NotifExternalAlarm
1.3.6.1.4.1.18086.3080.64.0.13 - pt3080NotifExternalInput1Alarm
1.3.6.1.4.1.18086.3080.64.0.72 - pt3080NotifExternalInput2Alarm
1.3.6.1.4.1.18086.3080.64.0.73 - pt3080NotifExternalInput3Alarm
1.3.6.1.4.1.18086.3080.64.0.74 - pt3080NotifExternalInput4Alarm
1.3.6.1.4.1.18086.3080.64.0.75 - pt3080NotifExternalInput5Alarm
1.3.6.1.4.1.18086.3080.64.0.183 - pt3080NotifExternalInput6Alarm
1.3.6.1.4.1.18086.3080.64.0.186 - pt3080NotifExternalInput7Alarm
1.3.6.1.4.1.18086.3080.64.0.187 - pt3080NotifExternalInput8Alarm
1.3.6.1.4.1.18086.3080.64.0.188 - pt3080NotifGNSSAlarm
1.3.6.1.4.1.18086.3080.64.0.10 - pt3080NotifGNSSAntennaFaultAlarm
1.3.6.1.4.1.18086.3080.64.0.107 - pt3080NotifGNSSHoldOverAlarm
1.3.6.1.4.1.18086.3080.64.0.108 - pt3080NotifGNSSUnlockedAlarm
1.3.6.1.4.1.18086.3080.64.0.98 - pt3080NotifHWMonitorAlarm
1.3.6.1.4.1.18086.3080.64.0.14 - pt3080NotifHWMonitorBackplaneTemperatureAlarm
1.3.6.1.4.1.18086.3080.64.0.162 - pt3080NotifHWMonitorFPGAAlarm
1.3.6.1.4.1.18086.3080.64.0.156 - pt3080NotifHWMonitorLeftFanAlarm
1.3.6.1.4.1.18086.3080.64.0.159 - pt3080NotifHWMonitorMainBoardCPUTemperatureAlarm
1.3.6.1.4.1.18086.3080.64.0.157 - pt3080NotifHWMonitorMainBoardTemperatureAlarm
1.3.6.1.4.1.18086.3080.64.0.158 - pt3080NotifHWMonitorRightFan2Alarm
1.3.6.1.4.1.18086.3080.64.0.160 - pt3080NotifInternalAlarm
1.3.6.1.4.1.18086.3080.64.0.18 - pt3080NotifInternalBackplaneAlarm
1.3.6.1.4.1.18086.3080.64.0.129 - pt3080NotifInternalBatteryAlarm
1.3.6.1.4.1.18086.3080.64.0.137 - pt3080NotifInternalDownConverterAlarm
1.3.6.1.4.1.18086.3080.64.0.135 - pt3080NotifInternalEthAlarm
1.3.6.1.4.1.18086.3080.64.0.146 - pt3080NotifInternalFirmware1Alarm
1.3.6.1.4.1.18086.3080.64.0.139 - pt3080NotifInternalGNSSAlarm
1.3.6.1.4.1.18086.3080.64.0.142 - pt3080NotifInternalMainboardAlarm
1.3.6.1.4.1.18086.3080.64.0.136 - pt3080NotifInternalPLLUnlockedAlarm
1.3.6.1.4.1.18086.3080.64.0.182 - pt3080NotifInternalReferenceClockAlarm
1.3.6.1.4.1.18086.3080.64.0.132 - pt3080NotifInternalSatelliteAlarm
1.3.6.1.4.1.18086.3080.64.0.143 - pt3080NotifInternalUpConverterAlarm
1.3.6.1.4.1.18086.3080.64.0.134 - pt3080NotifModulatorAlarm
1.3.6.1.4.1.18086.3080.64.0.3 - pt3080NotifRFAlarm
1.3.6.1.4.1.18086.3080.64.0.9 - pt3080NotifRFAlcRangeAlarm
1.3.6.1.4.1.18086.3080.64.0.79 - pt3080NotifRFLevelOutOfRangeAlarm
1.3.6.1.4.1.18086.3080.64.0.87 - pt3080NotifRFOverloadProtectionAlarm
1.3.6.1.4.1.18086.3080.64.0.44 - pt3080NotifRefenceClockAlarm
1.3.6.1.4.1.18086.3080.64.0.8 - pt3080NotifRefenceClockExtern10MHzLossAlarm
1.3.6.1.4.1.18086.3080.64.0.78 - pt3080NotifRefenceClockExtern1PPSLossAlarm
1.3.6.1.4.1.18086.3080.64.0.76 - pt3080NotifRefenceClockExternal10MHzHoldOverAlarm
1.3.6.1.4.1.18086.3080.64.0.109 - pt3080NotifRefenceClockExternal1PPSHoldOverAlarm
1.3.6.1.4.1.18086.3080.64.0.110 - pt3080NotifRefenceClockIntern1PPSLossAlarm
1.3.6.1.4.1.18086.3080.64.0.77 - pt3080NotifRefenceClockNTPSyncLossAlarm
1.3.6.1.4.1.18086.3080.64.0.89 - pt3080NotifSFNAlarm
1.3.6.1.4.1.18086.3080.64.0.7 - pt3080NotifSFNFreeRunningModeAlarm
1.3.6.1.4.1.18086.3080.64.0.185 - pt3080NotifSFNResyncAlarm
1.3.6.1.4.1.18086.3080.64.0.80 - pt3080NotifSFNTSPrimaryMIPConfigErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.93 - pt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.81 - pt3080NotifSFNTSPrimaryNetworkDelayExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.82 - pt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarm
1.3.6.1.4.1.18086.3080.64.0.92 - pt3080NotifSFNTSSecondaryMIPConfigErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.95 - pt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.84 - pt3080NotifSFNTSSecondaryNetworkDelayExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.85 - pt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarm
1.3.6.1.4.1.18086.3080.64.0.94 - pt3080NotifSFNUntimedModeAlarm
1.3.6.1.4.1.18086.3080.64.0.184 - pt3080NotifTSPrimaryAlarm
1.3.6.1.4.1.18086.3080.64.0.5 - pt3080NotifTSPrimaryBufferPoolExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.28 - pt3080NotifTSPrimaryDelayMarginAlarm
1.3.6.1.4.1.18086.3080.64.0.190 - pt3080NotifTSPrimaryInputTSHoldOverAlarm
1.3.6.1.4.1.18086.3080.64.0.180 - pt3080NotifTSPrimaryMIPDataMissingAlarm
1.3.6.1.4.1.18086.3080.64.0.30 - pt3080NotifTSPrimaryMIPPriorityBadAlarm
1.3.6.1.4.1.18086.3080.64.0.31 - pt3080NotifTSPrimaryNWIDWrongAlarm
1.3.6.1.4.1.18086.3080.64.0.26 - pt3080NotifTSPrimaryPATLossAlarm
1.3.6.1.4.1.18086.3080.64.0.24 - pt3080NotifTSPrimaryPCRErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.23 - pt3080NotifTSPrimarySTSJitterExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.29 - pt3080NotifTSPrimaryStuffingRateExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.27 - pt3080NotifTSPrimarySyncErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.22 - pt3080NotifTSPrimarySyncLossAlarm
1.3.6.1.4.1.18086.3080.64.0.21 - pt3080NotifTSPrimaryTSIDWrongAlarm
1.3.6.1.4.1.18086.3080.64.0.25 - pt3080NotifTSSecondaryAlarm
1.3.6.1.4.1.18086.3080.64.0.6 - pt3080NotifTSSecondaryBufferPoolExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.39 - pt3080NotifTSSecondaryDelayMarginAlarm
1.3.6.1.4.1.18086.3080.64.0.191 - pt3080NotifTSSecondaryMIPDataMissingAlarm
1.3.6.1.4.1.18086.3080.64.0.41 - pt3080NotifTSSecondaryMIPPriorityBadAlarm
1.3.6.1.4.1.18086.3080.64.0.42 - pt3080NotifTSSecondaryNWIDWrongAlarm
1.3.6.1.4.1.18086.3080.64.0.37 - pt3080NotifTSSecondaryPATLossAlarm
1.3.6.1.4.1.18086.3080.64.0.35 - pt3080NotifTSSecondaryPCRErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.34 - pt3080NotifTSSecondarySTSJitterExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.40 - pt3080NotifTSSecondaryStuffingRateExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.38 - pt3080NotifTSSecondarySyncErrorAlarm
1.3.6.1.4.1.18086.3080.64.0.33 - pt3080NotifTSSecondarySyncLossAlarm
1.3.6.1.4.1.18086.3080.64.0.32 - pt3080NotifTSSecondaryTSIDWrongAlarm
1.3.6.1.4.1.18086.3080.64.0.36 - pt3080NotifTSoIPAlarm
1.3.6.1.4.1.18086.3080.64.0.12 - pt3080NotifTSoIPRx1PackageErrorRationExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.115 - pt3080NotifTSoIPRx1SyncLossAlarm
1.3.6.1.4.1.18086.3080.64.0.119 - pt3080NotifTSoIPRx2PackageErrorRationExceededAlarm
1.3.6.1.4.1.18086.3080.64.0.117 - pt3080NotifTSoIPRx2SyncLossAlarm
1.3.6.1.4.1.18086.3080.64.0.121
Groups and compliance
- pt3080ASIGroup
- pt3080AlarmGroup
- pt3080BackplaneGroup
- pt3080ChannelFilterGroup
- pt3080CommsGroup
- pt3080Compliance
- pt3080DemodulatorGroup
- pt3080EventlogGroup
- pt3080GpsGroup
- pt3080InputGroup
- pt3080ModeGroup
- pt3080MonitorGroup
- pt3080NotifGroupASIAlarm
- pt3080NotifGroupCommAlarm
- pt3080NotifGroupExternalAlarm
- pt3080NotifGroupGNSSAlarm
- pt3080NotifGroupHWMonitorAlarm
- pt3080NotifGroupInternalAlarm
- pt3080NotifGroupModulatorAlarm
- pt3080NotifGroupRFAlarm
- pt3080NotifGroupRefenceClockAlarm
- pt3080NotifGroupSFNAlarm
- pt3080NotifGroupTSPrimaryAlarm
- pt3080NotifGroupTSSecondaryAlarm
- pt3080NotifGroupTSoIPAlarm
- pt3080NotifsGroup
- pt3080OutputGroup
- pt3080PrecorrectorGroup
- pt3080PresetGroup
- pt3080ReceptionGroup
- pt3080SystemGroup
- pt3080TSoIPGroup
- pt3080TestGroup