TRIPPLITE-PRODUCTS
Tripp LiteThis MIB module defines MIB objects which provide mechanisms for remote management capabilities of Tripp Lite PowerAlert and related software.
snmptranslate -m TRIPPLITE-PRODUCTS -Tpsnmpwalk -v2c -c <community> -m TRIPPLITE-PRODUCTS <host> 1.3.6.1.4.1.850.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-MIB | sysUpTime |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TRIPPLITE | tripplite |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ItlpProducts | 1.3.6.1.4.1.850.1 | ||||||||||||||||||||
identity This MIB module defines MIB objects which provide mechanisms for remote management capabilities of Tripp Lite PowerAlert and related software. | |||||||||||||||||||||
| NtlpHardware | 1.3.6.1.4.1.850.1.1 | ||||||||||||||||||||
| NtlpDevice | 1.3.6.1.4.1.850.1.1.1 | ||||||||||||||||||||
| StlpDeviceNumDevices | 1.3.6.1.4.1.850.1.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of devices that this agent is currently managing. | |||||||||||||||||||||
| TtlpDeviceTable | 1.3.6.1.4.1.850.1.1.1.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of device table entries. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpDeviceEntry | 1.3.6.1.4.1.850.1.1.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular device managed by this agent.
| |||||||||||||||||||||
| CtlpDeviceIndex | 1.3.6.1.4.1.850.1.1.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the device. | |||||||||||||||||||||
| CtlpDeviceRowStatus | 1.3.6.1.4.1.850.1.1.1.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Used with table edits to indicate the status of a given row in tlpDeviceTable. | |||||||||||||||||||||
| CtlpDeviceType | 1.3.6.1.4.1.850.1.1.1.2.1.3 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current The type of device. One of the appropriate hardware types: ups, pdu, envirosense, etc. | |||||||||||||||||||||
| CtlpDeviceManufacturer | 1.3.6.1.4.1.850.1.1.1.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the manufacturer. | |||||||||||||||||||||
| CtlpDeviceModel | 1.3.6.1.4.1.850.1.1.1.2.1.5 | DisplayString | RO | PDUMV30HVNETLX | |||||||||||||||||
column · DisplayString · read-only · current The model designation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpDeviceName | 1.3.6.1.4.1.850.1.1.1.2.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-supplied name for the device. | |||||||||||||||||||||
| CtlpDeviceID | 1.3.6.1.4.1.850.1.1.1.2.1.7 | INTEGER (0..65535) | RW | ||||||||||||||||||
column · INTEGER (0..65535) · read-write · current A user-supplied numeric identifier for the device. The range of this value accommodates all devices; however, some devices support a smaller range and return an error when setting to a value outside the supported range. | |||||||||||||||||||||
| CtlpDeviceLocation | 1.3.6.1.4.1.850.1.1.1.2.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-supplied location for the device. | |||||||||||||||||||||
| CtlpDeviceRegion | 1.3.6.1.4.1.850.1.1.1.2.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-supplied region for the device. | |||||||||||||||||||||
| CtlpDeviceStatus | 1.3.6.1.4.1.850.1.1.1.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The currently most critical alarm status for the device.
| |||||||||||||||||||||
| CtlpDeviceAssetTag | 1.3.6.1.4.1.850.1.1.1.2.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-supplied textual identifier for the device. | |||||||||||||||||||||
| NtlpDeviceDetail | 1.3.6.1.4.1.850.1.1.2 | ||||||||||||||||||||
| TtlpDeviceIdentTable | 1.3.6.1.4.1.850.1.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The identity details of each device in device table. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpDeviceIdentEntry | 1.3.6.1.4.1.850.1.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing details for a particular device.
| |||||||||||||||||||||
| CtlpDeviceIdentProtocol | 1.3.6.1.4.1.850.1.1.2.1.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Tripplite protocol used to communicate with the device. | |||||||||||||||||||||
| CtlpDeviceIdentCommPortType | 1.3.6.1.4.1.850.1.1.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of communications port used to connect with the device.
| |||||||||||||||||||||
| CtlpDeviceIdentCommPortName | 1.3.6.1.4.1.850.1.1.2.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the communications port. | |||||||||||||||||||||
| CtlpDeviceIdentFirmwareVersion | 1.3.6.1.4.1.850.1.1.2.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The firmware version of the device. | |||||||||||||||||||||
| CtlpDeviceIdentSerialNum | 1.3.6.1.4.1.850.1.1.2.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The serial number of the device. | |||||||||||||||||||||
| CtlpDeviceIdentDateInstalled | 1.3.6.1.4.1.850.1.1.2.1.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The installation date for this device in the format of yyyy-mm-dd. | |||||||||||||||||||||
| CtlpDeviceIdentHardwareVersion | 1.3.6.1.4.1.850.1.1.2.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The hardware revision of the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device. | |||||||||||||||||||||
| CtlpDeviceIdentCurrentUptime | 1.3.6.1.4.1.850.1.1.2.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The device uptime since its last startup. A device returning a single, numeric value reports uptime in hours. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
| |||||||||||||||||||||
| CtlpDeviceIdentTotalUptime | 1.3.6.1.4.1.850.1.1.2.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The cumulative (total) uptime for the device. A device returning a single, numeric value reports total uptime in days. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
| |||||||||||||||||||||
| CtlpDeviceIdentFirmwareVersion2 | 1.3.6.1.4.1.850.1.1.2.1.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The firmware version of second IC on the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device. | |||||||||||||||||||||
| CtlpDeviceIdentFirmwareVersion3 | 1.3.6.1.4.1.850.1.1.2.1.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The firmware version of third IC on the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device. | |||||||||||||||||||||
| CtlpDeviceIdentNvrID | 1.3.6.1.4.1.850.1.1.2.1.1.12 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The id of NVRAM. This value will return ERROR_NO_SUCH_NAME if not supported by the device. | |||||||||||||||||||||
| NtlpDeviceTypes | 1.3.6.1.4.1.850.1.1.3 | ||||||||||||||||||||
| NtlpUps | 1.3.6.1.4.1.850.1.1.3.1 | ||||||||||||||||||||
| NtlpUpsIdent | 1.3.6.1.4.1.850.1.1.3.1.1 | ||||||||||||||||||||
| StlpUpsIdentNumUps | 1.3.6.1.4.1.850.1.1.3.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of ups devices that this agent is currently managing. | |||||||||||||||||||||
| TtlpUpsIdentTable | 1.3.6.1.4.1.850.1.1.3.1.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The identity details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsIdentEntry | 1.3.6.1.4.1.850.1.1.3.1.1.2.1 | NA | |||||||||||||||||||
| CtlpUpsIdentNumInputs | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of input lines supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumOutputs | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of output lines supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumBypass | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of bypass lines supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumPhases | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of phases supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumOutlets | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of receptacles supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumOutletGroups | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of user-defined receptacle groups created for the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumBatteries | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of batteries, internal and external combined, connected to the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumFans | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of fans supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumHeatsinks | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of heatsink thermistors supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumInputContacts | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of input contacts supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumOutputContacts | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of output contacts supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumActiveControlModules | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of active control modules supported by the ups. | |||||||||||||||||||||
| CtlpUpsIdentNumRedundantControlModules | 1.3.6.1.4.1.850.1.1.3.1.1.2.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of redundant control modules supported by the ups. | |||||||||||||||||||||
| TtlpUpsSupportsTable | 1.3.6.1.4.1.850.1.1.3.1.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The supported details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsSupportsEntry | 1.3.6.1.4.1.850.1.1.3.1.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing supported details for a particular ups.
| |||||||||||||||||||||
| CtlpUpsSupportsEnergywise | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.1 | TruthValue | RO | deprecated | |||||||||||||||||
column · TruthValue · read-only · deprecated Indicates whether the ups supports Cisco EnergyWise. | |||||||||||||||||||||
| CtlpUpsSupportsRampShed | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ups supports ramping and shedding. | |||||||||||||||||||||
| CtlpUpsSupportsOutletGroup | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ups supports outlet groups. | |||||||||||||||||||||
| CtlpUpsSupportsOutletCurrent | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.4 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ups reports individual receptacle current measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpUpsOutletCurrent. | |||||||||||||||||||||
| CtlpUpsSupportsOutletVoltage | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ups reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpUpsOutletVoltage. | |||||||||||||||||||||
| CtlpUpsSupportsOutletActivePower | 1.3.6.1.4.1.850.1.1.3.1.1.3.1.6 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ups reports individual receptacle power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpUpsOutletActivePower. | |||||||||||||||||||||
| NtlpUpsDevice | 1.3.6.1.4.1.850.1.1.3.1.2 | ||||||||||||||||||||
| TtlpUpsDeviceTable | 1.3.6.1.4.1.850.1.1.3.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The device details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsDeviceEntry | 1.3.6.1.4.1.850.1.1.3.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing device details for a particular ups.
| |||||||||||||||||||||
| CtlpUpsDeviceMainLoadState | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.1 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The current state of the main output of the device.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceMainLoadControllable | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.2 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the main output is controllable, and whether the ups can be turned off and on. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceMainLoadCommand | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.3 | INTEGER | RW | idle(0) | |||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDevicePowerOnDelay | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.4 | Integer32 | RW | 5 | |||||||||||||||||
column · Integer32 · read-write · current The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceTestDate | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.5 | DisplayString | RO | UNKNOWN | |||||||||||||||||
column · DisplayString · read-only · current The date of the last self-test run on the ups, in the format yyyy-mm-dd. The test date is not valid under certain circumstances, such as when no test has been performed, tlpUpsDeviceTestResultsStatus is noTest(0). The agent will always return ERROR_NO_SUCH_NAME when the test date is not valid or not supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceTestResultsStatus | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.6 | INTEGER | RO | doneAndPassed(1) | |||||||||||||||||
column · INTEGER · read-only · current The result of the last self-test run on the ups. The noTestInitiated(6) result is a duplicate of noTest(0) and was deprecated in agent v20. All untested self tests, where supported, will return noTest(0).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceTemperatureC | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.7 | Integer32 | RO | 220 | |||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceTemperatureF | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.8 | Integer32 | RO | 716 | |||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceLastACFailureReason | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The last reason for ac failure.
| |||||||||||||||||||||
| CtlpUpsDeviceLastShutdownReason | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The last reason for device shut down.
| |||||||||||||||||||||
| CtlpUpsDeviceOutputCurrentPrecision | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.11 | INTEGER | RO | tenths(1) | |||||||||||||||||
column · INTEGER · read-only · current Output current is reported by tlpUpsOutputLineCurrent, tlpUpsOutputLineCurrentMin and tlpUpsOutputLineCurrentMax. These values are all reported in hundredths(0.01A),which accommodates all models; however, on any given device the actual precision may vary. This value describes the actual precision, which can be used as a divisor against the output current values to obtain the true output current measurement. For example, if tlpUpsOutputLineCurrent reports 530 and tlpUpsDeviceOutputCurrentPrecision is tenths(1), then the actual output current is 5.3.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceOutputActivePowerTotal | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.12 | Unsigned32 | RO | 301 | |||||||||||||||||
column · Unsigned32 · read-only · current The AC output total power for all circuits. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceAggregatePowerFactor | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate power factor of all phases. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsDeviceGeneralFault | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.14 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the ups is in a fault condition. When the ups is in such a fault condition, the condition can be cleared with tlpUpsControlResetGeneralFault. If not supported, this value will always return ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceUpsType | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.15 | INTEGER | RO | onLine(0) | |||||||||||||||||
column · INTEGER · read-only · current The type of ups.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsDeviceLastBypassReason | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The last reason the ups went into bypass mode.
| |||||||||||||||||||||
| CtlpUpsDeviceBuzzerStatus | 1.3.6.1.4.1.850.1.1.3.1.2.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present state of the audible alarm. When buzzing(1), use tlpUpsControlMuteBuzzer to temporarily silence the buzzer until the current alarm state is cleared. Use tlpUpsConfigAudibleStatus to permanently disable the audible alarm from sounding when entering any alarm state.
| |||||||||||||||||||||
| NtlpUpsDetail | 1.3.6.1.4.1.850.1.1.3.1.3 | ||||||||||||||||||||
| NtlpUpsBattery | 1.3.6.1.4.1.850.1.1.3.1.3.1 | ||||||||||||||||||||
| TtlpUpsBatterySummaryTable | 1.3.6.1.4.1.850.1.1.3.1.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The battery system summary of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsBatterySummaryEntry | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular battery system managed by this agent.
| |||||||||||||||||||||
| CtlpUpsBatteryStatus | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.1 | INTEGER | RO | batteryNormal(2) | |||||||||||||||||
column · INTEGER · read-only · current The indication of the capacity remaining in the ups system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than tlpUpsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or equal to tlpUpsConfigLowBattTime. A value of batteryDepleted indicates that the ups will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent and the ups is unable to sustain the output).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsSecondsOnBattery | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.2 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current If the unit is on battery power, the elapsed time since the ups last switched to battery power, or the time since the network management subsystem was last restarted, whichever is less. Zero shall be returned if the unit is not on battery power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsEstimatedMinutesRemaining | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.3 | Unsigned32 | RO | 72 | |||||||||||||||||
column · Unsigned32 · read-only · current An estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsEstimatedChargeRemaining | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.4 | INTEGER (0..100) | RO | 100 | |||||||||||||||||
column · INTEGER (0..100) · read-only · current An estimate of the battery charge remaining expressed as a percent of full charge.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryRunTimeRemaining | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.5 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The run time remaining before batteries are exhausted. If the device does not support run time remaining, then the agent reports ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryTotalMinutesOnBattery | 1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The total accumulative minutes the ups has run on the battery.
| |||||||||||||||||||||
| TtlpUpsBatteryDetailTable | 1.3.6.1.4.1.850.1.1.3.1.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The battery detail of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsBatteryDetailEntry | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular battery system managed by this agent.
| |||||||||||||||||||||
| CtlpUpsBatteryDetailVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.1 | Unsigned32 | RO | 821 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present battery voltage.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryDetailCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The present battery current.
| |||||||||||||||||||||
| CtlpUpsBatteryDetailCapacity | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.3 | INTEGER (0..100) | RO | 100 | |||||||||||||||||
column · INTEGER (0..100) · read-only · current The estimated remaining battery capacity expressed as a percent of full capacity.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryDetailCharge | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.4 | INTEGER | RO | normal(4) | |||||||||||||||||
column · INTEGER · read-only · current Denotes the charge state of the battery.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryDetailChargerStatus | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The status of the battery charger. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsBatteryDetailNominalVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.6 | Unsigned32 | RO | 72 | |||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the battery voltage. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryDetailFullyCharged | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.7 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current Denotes whether the battery is fully charged. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryDetailOvercharged | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.8 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether the battery is over charged. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryDetailVoltageNegative | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present negative battery voltage.
| |||||||||||||||||||||
| CtlpUpsBatteryDetailVoltagePositive | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present positive battery voltage.
| |||||||||||||||||||||
| CtlpUpsBatteryDetailMaxChargerCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.11 | INTEGER (0..255) | RO | ||||||||||||||||||
column · INTEGER (0..255) · read-only · current The maximum charging current for the battery. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsBatteryPackIdentTable | 1.3.6.1.4.1.850.1.1.3.1.3.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The battery identification details for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by upsIdentNumUps and the number of battery battery packs per each as reported by tlpUpsNumBatteryPacks. | |||||||||||||||||||||
| RtlpUpsBatteryPackIdentEntry | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular battery pack managed by this agent. | |||||||||||||||||||||
| CtlpUpsBatteryPackIdentIndex | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups battery pack. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackIdentManufacturer | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.2 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The manufacturer of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackIdentModel | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.3 | DisplayString | RO | 12v9HR | |||||||||||||||||
column · DisplayString · read-only · current The model or device name of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackIdentSerialNum | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.4 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The serial number of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackIdentFirmware | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.5 | DisplayString | RO | 0 | |||||||||||||||||
column · DisplayString · read-only · current The firmware of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackIdentSKU | 1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SKU of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| TtlpUpsBatteryPackConfigTable | 1.3.6.1.4.1.850.1.1.3.1.3.1.4 | NA | |||||||||||||||||||
table · not-accessible · current The battery configuration details for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by upsIdentNumUps and the number of battery battery packs per each as reported by tlpUpsNumBatteryPacks. | |||||||||||||||||||||
| RtlpUpsBatteryPackConfigEntry | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular battery pack managed by this agent. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigChemistry | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of battery pack.
| |||||||||||||||||||||
| CtlpUpsBatteryPackConfigStyle | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.2 | INTEGER | RO | nonsmart(1) | |||||||||||||||||
column · INTEGER · read-only · current The style of battery pack.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackConfigLocation | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The location of the battery pack.
| |||||||||||||||||||||
| CtlpUpsBatteryPackConfigStrings | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of series strings in parallel contained in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigBatteriesPerString | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of battery per each string in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigCellsPerBattery | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The number of cells per battery.. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigNumBatteries | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.7 | Unsigned32 | RO | 6 | |||||||||||||||||
column · Unsigned32 · read-only · current The total number of batteries contained in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackConfigCapacityUnits | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The units of measurement used for tlpUpsBatteryPackConfigDesignCapacity and tlpUpsBatteryPackConfigCellCapacity. If supported, this value will report either mAHR(1), amps per hour, or mWhr(1), watts per hour. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsBatteryPackConfigDesignCapacity | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The theoretical or nominal capacity of a new battery pack in the measurement defined by tlpUpsBatteryPackConfigCapacityUnits. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigCellCapacity | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The capacity of the batteries in the measurement defined by tlpUpsBatteryPackConfigCapacityUnits. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigMinCellVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum cell voltage for the batteries. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigMaxCellVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum cell voltage for the batteries. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigRechargeable | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.13 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether this battery pack is rechargeable. | |||||||||||||||||||||
| CtlpUpsBatteryPackConfigFullChargeCapacity | 1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The predicted capacity of the battery pack when fully charged in the measurement defined by tlpUpsBatteryPackConfigCapacityUnits. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| TtlpUpsBatteryPackDetailTable | 1.3.6.1.4.1.850.1.1.3.1.3.1.5 | NA | |||||||||||||||||||
table · not-accessible · current The details of each battery pack for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss and battery packs managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumBatteryPacks. | |||||||||||||||||||||
| RtlpUpsBatteryPackDetailEntry | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular battery system managed by this agent. | |||||||||||||||||||||
| CtlpUpsBatteryPackDetailCondition | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.1 | INTEGER | RO | good(1) | |||||||||||||||||
column · INTEGER · read-only · current The condition of the battery. A bad battery should be replaced.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackDetailTemperatureC | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.2 | Unsigned32 | RO | 4294964565 | |||||||||||||||||
column · Unsigned32 · read-only · current The ambient temperature at or near the ups Battery casing.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackDetailTemperatureF | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.3 | Unsigned32 | RO | 4294962699 | |||||||||||||||||
column · Unsigned32 · read-only · current The ambient temperature at or near the ups Battery casing.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackDetailAge | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The age of the battery in tenths of years. This is equal to the current date minus tlpUpsBatteryPackDetailLastReplaceDate.
| |||||||||||||||||||||
| CtlpUpsBatteryPackDetailLastReplaceDate | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.5 | DisplayString | RW | 2023-03-08 | |||||||||||||||||
column · DisplayString · read-write · current The date when the batteries were last replaced in yyyy-mm-dd format. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsBatteryPackDetailNextReplaceDate | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The date when the batteries should next be replaced in yyyy-mm-dd format. | |||||||||||||||||||||
| CtlpUpsBatteryPackDetailCycleCount | 1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.7 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current The number of times the battery went into invert mode. This number is incremented by 1 each time the unit goes on battery mode (with the exception of Self Test mode). If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NtlpUpsInput | 1.3.6.1.4.1.850.1.1.3.1.3.2 | ||||||||||||||||||||
| TtlpUpsInputTable | 1.3.6.1.4.1.850.1.1.3.1.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The input details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsInputEntry | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to all input lines per each ups managed by this agent.
| |||||||||||||||||||||
| CtlpUpsInputLineBads | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A count of the number of times the input entered an out-of-tolerance condition as defined by the manufacturer. This count is incremented by one each time the input transitions from zero out-of-tolerance lines to one or more input lines out-of-tolerance. This value is not supported on all units. If the ups does not support this value, then the agent reports ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsInputNominalVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsInputNominalFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line frequency. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsInputLowTransferVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum line voltage allowed before the ups transfers to battery backup.
| |||||||||||||||||||||
| CtlpUpsInputLowTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpUpsInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpUpsInputLowTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpUpsInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpUpsInputHighTransferVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum line voltage allowed before the ups system transfers to battery backup.
| |||||||||||||||||||||
| CtlpUpsInputHighTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpUpsInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpUpsInputHighTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpUpsInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpUpsInputCurrentTotal | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate total of conductor currents. If the ups does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsInputLowTransferVoltageResetTolerance | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current If a unit is transferred to battery backup due to under-voltage, the line voltage has to rise above this value from tlpUpsConfigLowVoltageTransfer, before the unit switched back to the AC input.
| |||||||||||||||||||||
| CtlpUpsInputHighTransferVoltageResetTolerance | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current If an input transferred to battery backup due to over-voltage, the line voltage on the input source has to fall below this value from tlpUpsConfigHighVoltageTransfer, before the unit switched back to the AC input.
| |||||||||||||||||||||
| CtlpUpsInputTransformerStatus | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes the status of the transformer as to whether it is presently reducing or boosting the input.
| |||||||||||||||||||||
| CtlpUpsInputAvrTransitionCount | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of times the automatic voltage regulating transformer transitions from a normal state to either boosting or reducing. This number is incremented by 1 each time a transition occurs. Use tlpUpsControlResetAvrTransitionCount to reset the count. If the ups does not support this value, then the agent will report ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpUpsInputSource | 1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes the current input source for the ups.
| |||||||||||||||||||||
| TtlpUpsInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.1.3.2.2 | NA | |||||||||||||||||||
table · not-accessible · current The input phase details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumPhases. | |||||||||||||||||||||
| RtlpUpsInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpUpsInputPhaseIndex | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups input phase. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsInputPhaseFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.2 | Unsigned32 | RO | 600 | |||||||||||||||||
column · Unsigned32 · read-only · current The present input frequency for a given input line.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsInputPhaseVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.3 | Unsigned32 | RO | 2109 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input voltage for a given input line.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsInputPhaseVoltageMin | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.4 | Unsigned32 | RW | 476 | |||||||||||||||||
column · Unsigned32 · read-write · current The minimum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpUpsInputPhaseVoltageMin or tlpUpsInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpUpsControlResetInputVoltageMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsInputPhaseVoltageMax | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.5 | Unsigned32 | RW | 2266 | |||||||||||||||||
column · Unsigned32 · read-write · current The maximum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpUpsInputPhaseVoltageMin or tlpUpsInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpUpsControlResetInputVoltageMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsInputPhaseCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input current.
| |||||||||||||||||||||
| CtlpUpsInputPhasePower | 1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input true power.
| |||||||||||||||||||||
| NtlpUpsOutput | 1.3.6.1.4.1.850.1.1.3.1.3.3 | ||||||||||||||||||||
| TtlpUpsOutputTable | 1.3.6.1.4.1.850.1.1.3.1.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The output details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsOutputEntry | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output line managed by this agent.
| |||||||||||||||||||||
| CtlpUpsOutputSource | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.1 | INTEGER | RO | economy(9) | |||||||||||||||||
column · INTEGER · read-only · current The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the device has an open circuit breaker.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputNominalVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.2 | Unsigned32 | RO | 208 | |||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the output voltage. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.3 | Unsigned32 | RO | 600 | |||||||||||||||||
column · Unsigned32 · read-only · current The present output frequency. The output frequency on most ups devices is common across all output lines. Some ups devices, however, maintain the output frequency per each line. If a common frequency is supported by the ups, then this frequency will contain the common frequency value. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputVARating | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.4 | Unsigned32 | RO | 3000 | |||||||||||||||||
column · Unsigned32 · read-only · current The VA Rating of the ups. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputPowerFactor | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of output power factor.
| |||||||||||||||||||||
| CtlpUpsOutputTotalUtilization | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total percentage of the ups power capacity presently being used on the ups measured in hundredths of a percent.
| |||||||||||||||||||||
| CtlpUpsOutputPowerRating | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The ac output apparent power rating. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsOutputChargerCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The charger current. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsOutputCurrentRating | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The output current rating. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsOutputEfficiency | 1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.10 | INTEGER | RO | 81 | |||||||||||||||||
column · INTEGER · read-only · current The present measurement of efficiency of output power conversion. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TtlpUpsOutputLineTable | 1.3.6.1.4.1.850.1.1.3.1.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The output line details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsOutputLineEntry | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output line managed by this agent. | |||||||||||||||||||||
| CtlpUpsOutputLineIndex | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups output line. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.2 | Unsigned32 | RO | 2101 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given output line.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.3 | Unsigned32 | RO | 140 | |||||||||||||||||
column · Unsigned32 · read-only · current The output current, in hundredths of amps, for a given line. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpUpsDeviceOutputCurrentPrecision.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineActivePower | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.4 | Unsigned32 | RO | 301 | |||||||||||||||||
column · Unsigned32 · read-only · current The present output true power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineUtilization | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.5 | INTEGER (0..200) | RO | 10 | |||||||||||||||||
column · INTEGER (0..200) · read-only · current The percentage of the ups power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present output frequency on this output line. The output frequency on most ups devices is common across all output lines. Some ups devices, however, maintain the output frequency per each line. If a per line frequency is supported by the ups, then this frequency value will reports the value of this line. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsOutputLineCurrentMin | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.7 | Unsigned32 | RO | 90 | |||||||||||||||||
column · Unsigned32 · read-only · current The minimum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpUpsDeviceOutputCurrentPrecision. Use tlpUpsControlResetOutputCurrentMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineCurrentMax | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.8 | Unsigned32 | RO | 310 | |||||||||||||||||
column · Unsigned32 · read-only · current The maximum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpUpsDeviceOutputCurrentPrecision. Use tlpUpsControlResetOutputCurrentMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineApparentPower | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present output apparent power.
| |||||||||||||||||||||
| CtlpUpsOutputLinePowerKVA | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.10 | Unsigned32 | RO | 30 | |||||||||||||||||
column · Unsigned32 · read-only · current The amount of apparent power being used.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLinePowerKW | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.11 | Unsigned32 | RO | 28 | |||||||||||||||||
column · Unsigned32 · read-only · current The amount of active power being used.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLine24hrEnergy | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.12 | Unsigned32 | RO | 684 | |||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption using present value of tlpUpsOutputLinePowerKW.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLineWattHours | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.13 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpUpsControlResetWattHours to reset the watt hours calculation algorithm.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutputLinePeakPower | 1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpUpsControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| NtlpUpsBypass | 1.3.6.1.4.1.850.1.1.3.1.3.4 | ||||||||||||||||||||
| TtlpUpsBypassTable | 1.3.6.1.4.1.850.1.1.3.1.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The bypass details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsBypassEntry | 1.3.6.1.4.1.850.1.1.3.1.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to all input lines per each ups managed by this agent.
| |||||||||||||||||||||
| CtlpUpsBypassFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present bypass frequency.
| |||||||||||||||||||||
| CtlpUpsBypassNominalFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.4.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the battery frequency. This value may not be supported on all models. If not supported, this agent will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsBypassLineTable | 1.3.6.1.4.1.850.1.1.3.1.3.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The bypass line details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsBypassLineEntry | 1.3.6.1.4.1.850.1.1.3.1.3.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular bypass line managed by this agent. | |||||||||||||||||||||
| CtlpUpsBypassLineIndex | 1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The bypass line identifier. | |||||||||||||||||||||
| CtlpUpsBypassLineVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present bypass voltage.
| |||||||||||||||||||||
| CtlpUpsBypassLineCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present bypass current.
| |||||||||||||||||||||
| CtlpUpsBypassLinePower | 1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present true power conveyed by the bypass.
| |||||||||||||||||||||
| NtlpUpsOutlet | 1.3.6.1.4.1.850.1.1.3.1.3.5 | ||||||||||||||||||||
| TtlpUpsOutletTable | 1.3.6.1.4.1.850.1.1.3.1.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The details of each ups outlet in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsOutletEntry | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet managed by this agent. | |||||||||||||||||||||
| CtlpUpsOutletIndex | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletName | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.2 | DisplayString | RW | Load 1 | |||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the name of the outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletDescription | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.3 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the device(s) connected to the given outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletState | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.4 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletControllable | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.5 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is controllable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletCommand | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.6 | INTEGER | RW | idle(0) | |||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletVoltage | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpUpsSupportsOutletVoltage.
| |||||||||||||||||||||
| CtlpUpsOutletCurrent | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpUpsSupportsCurrent.
| |||||||||||||||||||||
| CtlpUpsOutletActivePower | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The output power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpUpsSupportsPower.
| |||||||||||||||||||||
| CtlpUpsOutletRampAction | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.10 | INTEGER | RW | remainOff(0) | |||||||||||||||||
column · INTEGER · read-write · current The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletRampDelay | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.11 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletShedAction | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.12 | INTEGER | RW | remainOn(0) | |||||||||||||||||
column · INTEGER · read-write · current The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletShedDelay | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.13 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletGroup | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.14 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The tlpUpsOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletBank | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.15 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This is reported as a bank number, but it is rather an internal number unrelated to a bank as silk-screened on many devices and is unrelated to and often confused with tlpUpsOutletCircuit. The value reported is of no commercial use and was deprecated in agent version 20. | |||||||||||||||||||||
| CtlpUpsOutletCircuit | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.16 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Indicates on which circuit the given outlet is wired. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletPhase | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.17 | INTEGER | RO | phase1(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates on which phase or phases the given outlet is associated. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletReceptacleType | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.18 | INTEGER | RO | unknown(0) | |||||||||||||||||
column · INTEGER · read-only · current The type of receptacle for this outlet. Not all devices report receptacle types. The value will return unknown(0) when not supported.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpUpsOutletPowerFactor | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.19 | INTEGER (0..200) | RO | ||||||||||||||||||
column · INTEGER (0..200) · read-only · current The power factor for this outlet.
| |||||||||||||||||||||
| CtlpUpsOutletApparentPower | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The apparent power of this outlet.
| |||||||||||||||||||||
| CtlpUpsOutletReactivePower | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The reactive power of this outlet.
| |||||||||||||||||||||
| CtlpUpsOutletFrequency | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The frequency of this outlet.
| |||||||||||||||||||||
| CtlpUpsOutletUtilization | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of utilization of this outlet.
| |||||||||||||||||||||
| CtlpUpsOutlet24hrEnergy | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption of this outlet.
| |||||||||||||||||||||
| CtlpUpsOutletOvercurrent | 1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.25 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is in an overcurrent condition. | |||||||||||||||||||||
| TtlpUpsOutletGroupTable | 1.3.6.1.4.1.850.1.1.3.1.3.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The receptacle grouping details of each ups in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpUpsIdentNumOutletGroups per each device. | |||||||||||||||||||||
| RtlpUpsOutletGroupEntry | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet group managed by this agent. | |||||||||||||||||||||
| CtlpUpsOutletGroupIndex | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups outlet group. | |||||||||||||||||||||
| CtlpUpsOutletGroupRowStatus | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpUpsOutletGroupTable | |||||||||||||||||||||
| CtlpUpsOutletGroupName | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of this outlet group. | |||||||||||||||||||||
| CtlpUpsOutletGroupDescription | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A description for this outlet group. | |||||||||||||||||||||
| CtlpUpsOutletGroupState | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
| |||||||||||||||||||||
| CtlpUpsOutletGroupCommand | 1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
| |||||||||||||||||||||
| NtlpUpsWatchdog | 1.3.6.1.4.1.850.1.1.3.1.3.6 | ||||||||||||||||||||
| TtlpUpsWatchdogTable | 1.3.6.1.4.1.850.1.1.3.1.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The watchdog details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsWatchdogEntry | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing watchdog details for a particular ups.
| |||||||||||||||||||||
| CtlpUpsWatchdogSupported | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.1 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not this ups supports a watchdog restart. | |||||||||||||||||||||
| CtlpUpsWatchdogSecsBeforeRestart | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The maximum number of seconds that can expire between polls that the engine makes to the ups for data. If this time runs out, then the ups will cycle its outputs. Set this to zero to turns disable this feature. | |||||||||||||||||||||
| CtlpUpsWatchdogRestartAlarm | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Indicates whether an optional alarm should sound when the Watchdog function is triggered and cycle the ups receptacles.
| |||||||||||||||||||||
| CtlpUpsWatchdogStatus | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Indicates whether the ups should monitor rs232 communications so as to cycle the ups receptacles when a loss of communications occurs.
| |||||||||||||||||||||
| CtlpUpsWatchdogRetry | 1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled, the ups will automatically reset the watchdog timer when it times out. This automatic re-arm of the watchdog function will only occur up to 2 times if communications are not established before each restart. The result will be if watchdog is enabled and communications are lost, the ups will automatically reboot up to 3 times until communications are re-established.
| |||||||||||||||||||||
| NtlpUpsFan | 1.3.6.1.4.1.850.1.1.3.1.3.7 | ||||||||||||||||||||
| TtlpUpsFanTable | 1.3.6.1.4.1.850.1.1.3.1.3.7.1 | NA | |||||||||||||||||||
table · not-accessible · current The fan details for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumFans. | |||||||||||||||||||||
| RtlpUpsFanEntry | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular fan managed by this agent.
| |||||||||||||||||||||
| CtlpUpsFanIndex | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups fan. | |||||||||||||||||||||
| CtlpUpsFanLocation | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The location of the fan.
| |||||||||||||||||||||
| CtlpUpsFanStatus | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational status of the fan. This status is not supported on all models with fans. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsFanSpeed | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The fan speed in rotations per minute. Fan speed is not supported on all models with fans. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsFanActivationTemperatureDegF | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at which point the ups will turn on the fan. This value is configured using tlpUpsConfigExternalFanActivationTemperatureDegF. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsFanActivationTemperatureDegC | 1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at which point the ups will turn on the fan. This value is configured using tlpUpsConfigExternalFanActivationTemperatureDegC. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpUpsHeatsink | 1.3.6.1.4.1.850.1.1.3.1.3.8 | ||||||||||||||||||||
| TtlpUpsHeatsinkTable | 1.3.6.1.4.1.850.1.1.3.1.3.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of ups heatsink thermistor table entries. The number of entries is given by the value of tlpUpsIdentNumHeatsinks. | |||||||||||||||||||||
| RtlpUpsHeatsinkEntry | 1.3.6.1.4.1.850.1.1.3.1.3.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular heatsink managed by this agent. | |||||||||||||||||||||
| CtlpUpsHeatsinkIndex | 1.3.6.1.4.1.850.1.1.3.1.3.8.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups heatsink. | |||||||||||||||||||||
| CtlpUpsHeatsinkTemperatureC | 1.3.6.1.4.1.850.1.1.3.1.3.8.1.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Celsius. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsHeatsinkTemperatureF | 1.3.6.1.4.1.850.1.1.3.1.3.8.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Fahrenheit. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpUpsContact | 1.3.6.1.4.1.850.1.1.3.1.3.9 | ||||||||||||||||||||
| NtlpUpsInputContact | 1.3.6.1.4.1.850.1.1.3.1.3.9.1 | ||||||||||||||||||||
| TtlpUpsInputContactTable | 1.3.6.1.4.1.850.1.1.3.1.3.9.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The input contact details of each ups in the device table. The number of entries is given by the value of tlpUpsIdentNumInputContacts. | |||||||||||||||||||||
| RtlpUpsInputContactEntry | 1.3.6.1.4.1.850.1.1.3.1.3.9.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing input contact details for a particular ups. | |||||||||||||||||||||
| CtlpUpsInputContactIndex | 1.3.6.1.4.1.850.1.1.3.1.3.9.1.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups input contact details. | |||||||||||||||||||||
| CtlpUpsInputContactInAlarm | 1.3.6.1.4.1.850.1.1.3.1.3.9.1.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The alarm status of the input contact. Input contacts are not supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpUpsOutputContact | 1.3.6.1.4.1.850.1.1.3.1.3.9.2 | ||||||||||||||||||||
| TtlpUpsOutputContactTable | 1.3.6.1.4.1.850.1.1.3.1.3.9.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The output contact details of each ups in the device table. The number of entries is given by the value of tlpUpsIdentNumOuputContacts. | |||||||||||||||||||||
| RtlpUpsOutputContactEntry | 1.3.6.1.4.1.850.1.1.3.1.3.9.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing output contact details for a particular ups. | |||||||||||||||||||||
| CtlpUpsOutputContactIndex | 1.3.6.1.4.1.850.1.1.3.1.3.9.2.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups output contact details. | |||||||||||||||||||||
| CtlpUpsOutputContactInAlarm | 1.3.6.1.4.1.850.1.1.3.1.3.9.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The alarm status of the output contact. Output contacts are not supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpUpsControl | 1.3.6.1.4.1.850.1.1.3.1.4 | ||||||||||||||||||||
| TtlpUpsControlTable | 1.3.6.1.4.1.850.1.1.3.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The actionable controls for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsControlEntry | 1.3.6.1.4.1.850.1.1.3.1.4.1.1 | NA | |||||||||||||||||||
| CtlpUpsControlSelfTest | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate a self test on the ups. | |||||||||||||||||||||
| CtlpUpsControlRamp | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated ramp sequence on the ups. | |||||||||||||||||||||
| CtlpUpsControlShed | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated shed sequence on the ups. | |||||||||||||||||||||
| CtlpUpsControlUpsOn | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.4 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the ups on. | |||||||||||||||||||||
| CtlpUpsControlUpsOff | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the ups off. | |||||||||||||||||||||
| CtlpUpsControlUpsRestart | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.6 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to restart the ups. | |||||||||||||||||||||
| CtlpUpsControlBypass | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This switches the ups in and out of bypass mode. This value returns the current bypass mode: disable(0) if the ups is not in bypass mode, enable(1) if the ups is in bypass mode. Set to disable(0) to exit bypass mode, or enable(1) to enter bypass mode. If switching bypass mode is not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsControlResetWattHours | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.8 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpUpsDeviceWattHoursTotal and tlpUpsOutputLineWattHours calculation algorithms. | |||||||||||||||||||||
| CtlpUpsControlCancelSelfTest | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.9 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to cancel the self test in progress. | |||||||||||||||||||||
| CtlpUpsControlResetAllParameters | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.10 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset all configuration settings to the default values. | |||||||||||||||||||||
| CtlpUpsControlMuteBuzzer | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.11 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to temporarily mute the audible alarm. This control is only viable when tlpUpsConfigAudibleStatus is enabled(1) and the audible alarm is sounding. The audible alarm will be muted and will reset when the active alarm state clears. The audible alarm will sound again when the ups enters a new alarm state. Set tlpUpsConfigAudibleStatus to disabled(0) if permanently preventing the audible alarm from sounding is the desired outcome. | |||||||||||||||||||||
| CtlpUpsControlResetBatteryTransitionCount | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.12 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the number of times the battery went into invert mode as reported by tlpUpsBatteryPackDetailCycleCount. | |||||||||||||||||||||
| CtlpUpsControlResetLastReasonForBypass | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.13 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset/clear the last reason the ups went into bypass. | |||||||||||||||||||||
| CtlpUpsControlResetLastReasonStats | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.14 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset/clear the last reason for ac failure and last reason for shutdown statistics. | |||||||||||||||||||||
| CtlpUpsControlResetAvrTransitionCount | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.15 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpUpsInputAvrTransitionCount. | |||||||||||||||||||||
| CtlpUpsControlResetPeakPower | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.16 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpUpsOutputLinePeakPower calculation algorithm. | |||||||||||||||||||||
| CtlpUpsControlClearEventLog | 1.3.6.1.4.1.850.1.1.3.1.4.1.1.17 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to clear the event log retained by the ups. | |||||||||||||||||||||
| TtlpUpsControlOutputPhaseTable | 1.3.6.1.4.1.850.1.1.3.1.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The actionable output phase-specific controls for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsControlOutputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.1.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output phase managed by this agent. | |||||||||||||||||||||
| CtlpUpsControlResetOutputCurrentMinMax | 1.3.6.1.4.1.850.1.1.3.1.4.2.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpUpsOutputLineCurrentMin and tlpUpsOutputLineCurrentMax to their appropriate minimum and maximum values. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| TtlpUpsControlInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.1.4.3 | NA | |||||||||||||||||||
table · not-accessible · current The actionable input phase-specific controls for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpUpsControlInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.1.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpUpsControlResetInputVoltageMinMax | 1.3.6.1.4.1.850.1.1.3.1.4.3.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpUpsInputPhaseVoltageMin and tlpUpsInputPhaseVoltageMax to their appropriate minimum and maximum values. Resetting the minimum and maximum values for one phase on some devices will reset the values for all phases. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| NtlpUpsConfig | 1.3.6.1.4.1.850.1.1.3.1.5 | ||||||||||||||||||||
| TtlpUpsConfigTable | 1.3.6.1.4.1.850.1.1.3.1.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps. | |||||||||||||||||||||
| RtlpUpsConfigEntry | 1.3.6.1.4.1.850.1.1.3.1.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to all input lines per each ups managed by this agent.
| |||||||||||||||||||||
| CtlpUpsConfigInputVoltage | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
| |||||||||||||||||||||
| CtlpUpsConfigInputFrequency | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal input frequency. On those devices which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltage | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal value of the output voltage. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
| |||||||||||||||||||||
| CtlpUpsConfigOutputFrequency | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal output frequency. On those devices which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request will be rejected and the agent will respond with an appropriate error message.
| |||||||||||||||||||||
| CtlpUpsConfigAudibleStatus | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state is self- describing. Setting this object to muted(3) when the audible alarm is sounding shall temporarily silence the alarm. It will remain muted until it would normally stop sounding and the value returned for read operations during this period shall equal muted(3). At the end of this period, the value shall revert to enabled(2). Writes of the value muted(3) when the audible alarm is not sounding shall be accepted but otherwise shall have no effect.
| |||||||||||||||||||||
| CtlpUpsConfigAutoBatteryTest | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When disabled(0), the ups will not perform an automatic battery selftest. When set to another value, the ups will perform an automatic selftest in the approximate period defined by each respective enumerated value. This feature is generally not recommended.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartAfterShutdown | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled(1), the ups should autorestart after a shutdown from battery mode if valid AC is applied. When disabled(0), the ups should not autorestart when AC is restored and instead power up into standby mode.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRampOnTransition | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled(1), the ups should perform its preconfigured ramp sequence when valid AC is restored while in battery mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigAutoShedOnTransition | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled(1), the ups should perform its preconfigured shed sequence when valid AC is lost causing the ups to enter battery mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigBypassLowerLimitPercent | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.10 | INTEGER (-20..-5) | RW | ||||||||||||||||||
column · INTEGER (-20..-5) · read-write · current The lowest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigBypassUpperLimitPercent | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.11 | INTEGER (5..20) | RW | ||||||||||||||||||
column · INTEGER (5..20) · read-write · current The highest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigBypassLowerLimitVoltage | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.12 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The lowest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigBypassUpperLimitVoltage | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The highest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigColdStart | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables or disables the ability to turn the ups on without AC supplied. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigPowerStrategy | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The configurable economic mode options for the ups. The online(0) mode is the default configuration of most upss, which is synonymous as having the economic mode disabled. The maximumEfficiency(1) mode is the typical configuration to run in economy mode, which is synonymous as having the economic mode enabled. Constant50Hz(2) is a power strategy, which fixes the output frequency at 50Hz. Constant60Hz(3) is a power strategy, which fixes the output frequency at 60Hz. ConstantAuto(4) regulates the output frequency at nominal input frequency. AutoAdaptive(5) mode will cause the ups to automatically switch between online(0), maximum quality, and maximumEfficiency(1), maximum efficiency, to improve efficiency during stable utility periods and improve output regulation during unstable utility periods. Not all values are supported by all upss. Most upss, if supportive of economic mode, only supports online(0) and maximumEfficiency(1). If the ups does not support economic mode, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigFaultAction | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines the action to take if the output needs to be shut down due to a fault condition, limited by the type of fault incurred. When configured for bypass(0), the ups will go to bypass on a fault condition. When configured for standby(1), the ups will go to standby mode on a fault condition. Either configuration will be valid as long as AC input is within normal line voltage and frequency limits when the fault condition occurs. If the line is outside these limits, the ups will turn off. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigOffMode | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option governs what mode the ups should go into when AC input is available, but the load is either off or not battery backed up. If this setting is configured for bypass(1), the intention is that any time the ups would normally go into standby mode, it would instead go into bypass mode. Note that this setting does not dictate the mode for fault conditions, which is governed by tlpUpsConfigFaultAction. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigLineSensitivity | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Adjusts the AC line voltage sensitivity setting. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigLineQualifyTime | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.19 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The amount of time the ups monitors line power quality for stability before ac power is restored. If there is an attempt to set this variable to a value that is not supported, the request will be rejected and the agent will respond with an appropriate error message.
| |||||||||||||||||||||
| CtlpUpsConfigACPowerSenseType | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables configuration of ups AC power sensing to maximize ups operation for standard line power AC and generator power applications. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigAcPresentStartMode | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures how the ups will turn on when ac is present. alwaysOff will cause the ups to NEVER autostart regardless of how it was shut down or the state of tlpUpsConfigAutoRestartInverterShutdown. alwaysOn will cause the ups to ALWAYS autostart regardless of how it was shut down or the state of tlpUpsConfigAutoRestartInverterShutdown. lastState will cause the ups to autostart based on the method used last subject to tlpUpsConfigAutoRestartInverterShutdown. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryCapacityCoefficient | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.22 | INTEGER (5..20) | RW | ||||||||||||||||||
column · INTEGER (5..20) · read-write · current Used to adjust the battery capacity as the battery ages.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryTemperatureCompensation | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option reduces related float voltages during high temperature conditions. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryTimedShutdownStatus | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables the ups device shutdown after tlpUpsConfigBatteryTimedShutdownSeconds seconds. This shutdown occurs by the ups itself rather than by the LX card when installed. Whenever enabled, tlpUpsConfigBatteryTimedShutdownSeconds will always revert to zero(0). The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryTimedShutdownSeconds | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.25 | Unsigned32 (15..65534) | RW | ||||||||||||||||||
column · Unsigned32 (15..65534) · read-write · current Enables the ups device shutdown after the specified number of seconds. Whenever set, tlpUpsConfigBatteryTimedShutdownStatus will always become enabled. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups. | |||||||||||||||||||||
| CtlpUpsConfigBatteryMinCapacityToRestart | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.26 | INTEGER (0..90) | RW | ||||||||||||||||||
column · INTEGER (0..90) · read-write · current Restart the ups with ac returns and tlpUpsConfigAutoRestartAfterShutdown is enabled, if the battery capacity is more than the percentage (%) specified. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups. | |||||||||||||||||||||
| CtlpUpsConfigShutdownCompletionBehavior | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.27 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures whether the ups should reboot the output if ac returns before a delay before shutdown expires. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigEmergencyPowerOff | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.28 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures emergency power off (epo) functionality via the communications port.
| |||||||||||||||||||||
| CtlpUpsConfigEnergySavingSetting | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.29 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current Configures the ups to shut down if the load level is less than the percent indicated after five minutes in invert mode. A value less than five percent disables this feature whereas any value five percent or greater enables this feature. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigFrequencyConvertMode | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.30 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures the frequency convert mode for the ups. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryCapacityConfiguration | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.31 | INTEGER (7..100) | RW | ||||||||||||||||||
column · INTEGER (7..100) · read-write · current Configures the ups battery capacity. Depending on the ups, not all values in the range apply. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigAutoBatteryTestMinutes | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.32 | INTEGER (1..255) | RW | ||||||||||||||||||
column · INTEGER (1..255) · read-write · current Configures the number of minutes a ups battery will be tested when a test occurs. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| CtlpUpsConfigMaxBatteryChargerCurrent | 1.3.6.1.4.1.850.1.1.3.1.5.1.1.33 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current Configures the maximum charging current for ups battery. The agent will always return ERROR_NO_SUCH_NAME when this feature is not supported by the ups.
| |||||||||||||||||||||
| TtlpUpsConfigAutoRestartTable | 1.3.6.1.4.1.850.1.1.3.1.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The configurable automatic restart options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigAutoRestartEntry | 1.3.6.1.4.1.850.1.1.3.1.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configurable automatic restart options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartInverterShutdown | 1.3.6.1.4.1.850.1.1.3.1.5.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled(1) and the ups is turned off from invert mode (via user interaction), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartDelayedWakeup | 1.3.6.1.4.1.850.1.1.3.1.5.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled(1) and power fails during a DelayBeforeStartup and line remains invalid after the timeout expires, the ups will be set to turn back on automatically. If disabled(0), the ups will turn back on and go to standby mode instead.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartLowVoltageCutoff | 1.3.6.1.4.1.850.1.1.3.1.5.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled(1) and the ups is turned off from invert mode (via low voltage cutoff), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartOverLoad | 1.3.6.1.4.1.850.1.1.3.1.5.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled(1) and the ups is turned off from invert mode (via overload), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
| |||||||||||||||||||||
| CtlpUpsConfigAutoRestartOverTemperature | 1.3.6.1.4.1.850.1.1.3.1.5.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled(1) and the ups is turned off from invert mode (via over temperature), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
| |||||||||||||||||||||
| TtlpUpsConfigThresholdTable | 1.3.6.1.4.1.850.1.1.3.1.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The configurable threshold options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigThresholdEntry | 1.3.6.1.4.1.850.1.1.3.1.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configurable threshold options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryAgeThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The number of months for a battery to be in service. The battery age alarm, tlpUpsAlarmBatteryAgeAboveThreshold, is triggered when the current date exceeds tlpUpsBatteryPackDetailLastReplaceDate by tlpUpsConfigBatteryAgeThreshold months. This value was deprecated as of agent v2 and has become read-only. It is superseded by tlpUpsConfigBatteryAgeWarningThreshold and expected to become obsolete and not supported in a future release. All usages of this oid should be modified to use tlpUpsConfigBatteryAgeWarningThreshold instead.
| |||||||||||||||||||||
| CtlpUpsConfigLowBatteryThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.2 | INTEGER (11..90) | RW | ||||||||||||||||||
column · INTEGER (11..90) · read-write · current This value denotes the percentage of battery capacity remaining warning level. The low battery alarm, tlpUpsAlarmLowBattery, is triggered when tlpUpsEstimatedChargeRemaining drops below this value. This value must be greater than tlpUpsConfigLowBatteryCriticalThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigLowBatteryTime | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.3 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The value in seconds of tlpUpsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (discontinuous) values, then the agent shall round up to the next supported value. If the requested value is larger than the largest supported value, then the largest supported value shall be selected. This oid was deprecated in agent v20 and superceded by tlpUpsConfigLowBatteryRuntimeWarningThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigOverLoadThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.4 | INTEGER (5..105) | RW | ||||||||||||||||||
column · INTEGER (5..105) · read-write · current This value denotes the percentage of load at which the overload condition occurs. The overload alarm, tlpUpsAlarmOutputOverload, is triggered when the percentage of output load exceeds this value. This value must be greater than tlpUpsConfigOutputUtilizationWarningThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigLowBatteryCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.5 | INTEGER (10..89) | RW | ||||||||||||||||||
column · INTEGER (10..89) · read-write · current This value denotes the percentage of battery capacity remaining critical level. This value must be less than tlpUpsConfigLowBatteryThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryAgeWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.6 | INTEGER (0..50) | RW | ||||||||||||||||||
column · INTEGER (0..50) · read-write · current The number of years for a battery to be in service, represented in tenths of years. The battery age alarm, tlpUpsAlarmBatteryAgeAboveThreshold, is triggered when the current date exceeds tlpUpsBatteryPackDetailLastReplaceDate by tlpUpsConfigBatteryAgeWarningThreshold years. This value must be less than tlpUpsConfigBatteryAgeCriticalThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigBatteryAgeCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.7 | INTEGER (0..50) | RW | ||||||||||||||||||
column · INTEGER (0..50) · read-write · current The number of years for a battery in service to be deemed critical, represented in tenths of years. This value must be greater than tlpUpsConfigBatteryAgeWarningThreshold.
| |||||||||||||||||||||
| CtlpUpsConfigLowBatteryRuntimeWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value in minutes of tlpUpsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (discontinuous) values, then the agent shall round up to the next supported value. If the requested value is larger than the largest supported value, then the largest supported value shall be selected.
| |||||||||||||||||||||
| CtlpUpsConfigLowBatteryRuntimeCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.3.1.9 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value in minutes of tlpUpsEstimatedMinutesRemaining at which a critical lowBattery condition is declared. For agents which support only discrete (discontinuous) values, then the agent shall round up to the next supported value. If the requested value is larger than the largest supported value, then the largest supported value shall be selected.
| |||||||||||||||||||||
| TtlpUpsConfigVoltageTable | 1.3.6.1.4.1.850.1.1.3.1.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The voltage configuration details for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigVoltageEntry | 1.3.6.1.4.1.850.1.1.3.1.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing voltage configuration options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigHighVoltageTransfer | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The maximum line voltage allowed on the input source before the unit disconnects the AC input connection.
| |||||||||||||||||||||
| CtlpUpsConfigHighVoltageResetTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If an input connection is disconnected due to over-voltage, the line voltage on the input source has to fall below tlpUpsConfigHighVoltageTransfer less tlpUpsConfigHighVoltageTransferResetTolerance before the unit reconnects the AC input to input source.
| |||||||||||||||||||||
| CtlpUpsConfigHighVoltageReset | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If an input connection is disconnected due to over-voltage, the line voltage on the input source has to fall below tlpUpsConfigHighVoltageReset before the unit reconnects the AC input to input source.
| |||||||||||||||||||||
| CtlpUpsConfigLowVoltageTransfer | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The minimum line voltage allowed before the unit disconnects the AC input connection.
| |||||||||||||||||||||
| CtlpUpsConfigLowVoltageResetTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above tlpUpsConfigLowVoltageTransfer plus tlpUpsConfigLowVoltageTransferResetTolerance before the unit reconnect the AC input to input source.
| |||||||||||||||||||||
| CtlpUpsConfigLowVoltageReset | 1.3.6.1.4.1.850.1.1.3.1.5.4.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above tlpUpsConfigLowVoltageReset before the unit reconnect the AC input to input source.
| |||||||||||||||||||||
| NtlpUpsConfigContact | 1.3.6.1.4.1.850.1.1.3.1.5.5 | ||||||||||||||||||||
| TtlpUpsConfigContactTable | 1.3.6.1.4.1.850.1.1.3.1.5.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigContactEntry | 1.3.6.1.4.1.850.1.1.3.1.5.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing contact configuration options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigOutputContactBackupTimer | 1.3.6.1.4.1.850.1.1.3.1.5.5.1.1.1 | Unsigned32 (0..480) | RW | ||||||||||||||||||
column · Unsigned32 (0..480) · read-write · current This is the amount of runtime the ups supports in battery mode before sending a configured output contact notification. Output contacts are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| TtlpUpsConfigInputContactTable | 1.3.6.1.4.1.850.1.1.3.1.5.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The input contact details of each ups in device table. the number of entries is given by tlpUpsIdentNumInputContacts. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigInputContactEntry | 1.3.6.1.4.1.850.1.1.3.1.5.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing input contact details for a particular ups. | |||||||||||||||||||||
| CtlpUpsConfigInputContactIndex | 1.3.6.1.4.1.850.1.1.3.1.5.5.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups input contact details. | |||||||||||||||||||||
| CtlpUpsConfigInputContactSetup | 1.3.6.1.4.1.850.1.1.3.1.5.5.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Input contact configuration options. Input contacts are not supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsConfigOutputContactTable | 1.3.6.1.4.1.850.1.1.3.1.5.5.3 | NA | |||||||||||||||||||
table · not-accessible · current Output contact details of each ups in device table. The number of entries is given by tlpUpsIdentNumOutputContacts. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigOutputContactEntry | 1.3.6.1.4.1.850.1.1.3.1.5.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing output contact details for a particular ups. | |||||||||||||||||||||
| CtlpUpsConfigOutputContactIndex | 1.3.6.1.4.1.850.1.1.3.1.5.5.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ups output contact details. | |||||||||||||||||||||
| CtlpUpsConfigOutputContactSetup | 1.3.6.1.4.1.850.1.1.3.1.5.5.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Output contact configuration options. Output contacts are not supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpUpsConfigDb9 | 1.3.6.1.4.1.850.1.1.3.1.5.6 | ||||||||||||||||||||
| TtlpUpsConfigDb9InputTable | 1.3.6.1.4.1.850.1.1.3.1.5.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigDb9InputEntry | 1.3.6.1.4.1.850.1.1.3.1.5.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing contact configuration options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigDb9InputPins3and9 | 1.3.6.1.4.1.850.1.1.3.1.5.6.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When the ups detects a short between pin 3 and 9 for a certain amount of time, the ups will perform the action as specified. If not supported, this value returned is ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsConfigDb9OutputTable | 1.3.6.1.4.1.850.1.1.3.1.5.6.2 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigDb9OutputEntry | 1.3.6.1.4.1.850.1.1.3.1.5.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing contact configuration options for a particular ups.
| |||||||||||||||||||||
| CtlpUpsConfigDb9OutputPins1and5 | 1.3.6.1.4.1.850.1.1.3.1.5.6.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When the selected option is met, the ups will send a signal by bridging pins 1 and 5 on the db9 port. If not supported, this value returned is ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpUpsConfigDb9OutputPins8and5 | 1.3.6.1.4.1.850.1.1.3.1.5.6.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When the selected option is met, the ups will send a signal by bridging pins 8 and 5 on the db9 port. If not supported, this value returned is ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsConfigOutputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.1.5.7 | NA | |||||||||||||||||||
table · not-accessible · current The output phase configuration details for each ups in device table. This is a sparse dependent table, and will contain the number of entries based on the number of upss managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumPhases. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigOutputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.1.5.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output phase managed by this agent. | |||||||||||||||||||||
| CtlpUpsConfigOutputCurrentThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output current high/low threshold to evaluate output current high/low condition.
| |||||||||||||||||||||
| CtlpUpsConfigOutputCurrentHighThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which an output current high condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputCurrentLowThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which an output current low condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.4 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low critical condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigOutputUtilizationThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.9 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The tolerance value used together with tlpUpsConfigOutputUtilizationWarningThreshold to evaluate tlpUpsAlarmLoadLevelAboveThreshold condition.
| |||||||||||||||||||||
| CtlpUpsConfigOutputUtilizationWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.7.1.10 | INTEGER (5..105) | RW | ||||||||||||||||||
column · INTEGER (5..105) · read-write · current This value denotes the percentage of load at which the load warning condition occurs. The load warning alarm, tlpUpsAlarmLoadLevelAboveThreshold, is triggered when the percentage of output load exceeds this value. This threshold value must be less than tlpUpsConfigOverLoadThreshold when supported.
| |||||||||||||||||||||
| TtlpUpsConfigInputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.1.5.8 | NA | |||||||||||||||||||
table · not-accessible · current The input phase configuration details for each ups in device table. This is a sparse dependent table, and will contain the number of entries based on the number of upss managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumPhases. Not all options are available on all upss. | |||||||||||||||||||||
| RtlpUpsConfigInputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.1.5.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpUpsConfigInputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.1.5.8.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpUpsConfigInputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.8.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigInputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.8.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigInputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.8.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpUpsConfigInputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.1.5.8.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low critical condition is declared.
| |||||||||||||||||||||
| TtlpUpsConfigTemperatureFahrenheitTable | 1.3.6.1.4.1.850.1.1.3.1.5.9 | NA | |||||||||||||||||||
table · not-accessible · current The temperature configuration details for each ups device in device table. This is a sparse dependent table, and will contain some subset of devices that are ups device. Not all options are available on all ups devices. | |||||||||||||||||||||
| RtlpUpsConfigTemperatureFahrenheitEntry | 1.3.6.1.4.1.850.1.1.3.1.5.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing temperature configuration details for a particular ups device.
| |||||||||||||||||||||
| CtlpUpsConfigExternalFanActivationTemperatureDegF | 1.3.6.1.4.1.850.1.1.3.1.5.9.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Configures the temperature at which point the ups will turn on the external fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpUpsConfigTemperatureCelsiusTable | 1.3.6.1.4.1.850.1.1.3.1.5.10 | NA | |||||||||||||||||||
table · not-accessible · current The configuration details for each each ups device in device table. This is a sparse dependent table, and will contain some subset of devices that are ups device. Not all options are available on all ups devices. | |||||||||||||||||||||
| RtlpUpsConfigTemperatureCelsiusEntry | 1.3.6.1.4.1.850.1.1.3.1.5.10.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing temperature configuration details for a particular ups device.
| |||||||||||||||||||||
| CtlpUpsConfigExternalFanActivationTemperatureDegC | 1.3.6.1.4.1.850.1.1.3.1.5.10.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Configures the temperature at which point the ups will turn on the external fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpPdu | 1.3.6.1.4.1.850.1.1.3.2 | ||||||||||||||||||||
| NtlpPduIdent | 1.3.6.1.4.1.850.1.1.3.2.1 | ||||||||||||||||||||
| StlpPduIdentNumPdu | 1.3.6.1.4.1.850.1.1.3.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of pdu devices that this agent is currently managing. | |||||||||||||||||||||
| TtlpPduIdentTable | 1.3.6.1.4.1.850.1.1.3.2.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The identity details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduIdentEntry | 1.3.6.1.4.1.850.1.1.3.2.1.2.1 | NA | |||||||||||||||||||
| CtlpPduIdentNumInputs | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of input lines supported by the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumOutputs | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of output lines supported by the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumPhases | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of phases supported by the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumOutlets | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of receptacles supported by the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumOutletGroups | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of user-defined receptacle groups created for the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumCircuits | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of circuits supported by the pdu. | |||||||||||||||||||||
| CtlpPduIdentNumBreakers | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of monitored circuit breakers supported by the pdu. If the pdu has breakers that are not monitored by the device, the value of zero(0) will be returned. | |||||||||||||||||||||
| CtlpPduIdentNumHeatsinks | 1.3.6.1.4.1.850.1.1.3.2.1.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of heatsink thermistors supported by the pdu. | |||||||||||||||||||||
| TtlpPduSupportsTable | 1.3.6.1.4.1.850.1.1.3.2.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The supported details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduSupportsEntry | 1.3.6.1.4.1.850.1.1.3.2.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing supported details for a particular pdu.
| |||||||||||||||||||||
| CtlpPduSupportsEnergywise | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.1 | TruthValue | RO | deprecated | |||||||||||||||||
column · TruthValue · read-only · deprecated Indicates whether the pdu supports Cisco EnergyWise. | |||||||||||||||||||||
| CtlpPduSupportsRampShed | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the pdu supports ramping and shedding. | |||||||||||||||||||||
| CtlpPduSupportsOutletGroup | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the pdu supports outlet groups. | |||||||||||||||||||||
| CtlpPduSupportsOutletCurrent | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.4 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the pdu reports individual receptacle current measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpPduOutletCurrent. | |||||||||||||||||||||
| CtlpPduSupportsOutletVoltage | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the pdu reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpPduOutletVoltage. | |||||||||||||||||||||
| CtlpPduSupportsOutletActivePower | 1.3.6.1.4.1.850.1.1.3.2.1.3.1.6 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the pdu reports individual receptacle power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpPduOutletActivePower. | |||||||||||||||||||||
| TtlpPduDisplayTable | 1.3.6.1.4.1.850.1.1.3.2.1.4 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The display details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduDisplayEntry | 1.3.6.1.4.1.850.1.1.3.2.1.4.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry containing display details for a particular pdu.
| |||||||||||||||||||||
| CtlpPduDisplayScheme | 1.3.6.1.4.1.850.1.1.3.2.1.4.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the display scheme of the LED display. The value schemeReverse(0) indicates the tricolor LED indicator uses an alternate pattern. The value schemeNormal(1) indicates the LED indicator uses the standard pattern. This value may not be supported on all models. If not supported, the value will always return schemeNormal(1).
| |||||||||||||||||||||
| CtlpPduDisplayOrientation | 1.3.6.1.4.1.850.1.1.3.2.1.4.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the physical orientation of the LED display. The value displayNormal(0) indicates the display is right-side-up (normal). The value displayReverse(1) indicates the display is upside-down. This value may not be supported on all models. If not supported, the value will always return displayNormal(0).
| |||||||||||||||||||||
| CtlpPduDisplayAutoScroll | 1.3.6.1.4.1.850.1.1.3.2.1.4.1.3 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates whether the LED display automatically scrolls through displaying status values.
| |||||||||||||||||||||
| CtlpPduDisplayIntensity | 1.3.6.1.4.1.850.1.1.3.2.1.4.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the intensity, as a percentage, of the LED display. The value intensity100(4) indicates the display is at 100% intensity. The other values indicate the display is at a lesser intensity based upon the respective percentage denoted.
| |||||||||||||||||||||
| CtlpPduDisplayUnits | 1.3.6.1.4.1.850.1.1.3.2.1.4.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the units of measurement displayed on the LED display. The value normal(0) indicates that a temperature value, for example, is displayed in degrees Fahrenheit. The value metric(1) indicates a temperature value is displayed in degrees Celsius.
| |||||||||||||||||||||
| NtlpPduDevice | 1.3.6.1.4.1.850.1.1.3.2.2 | ||||||||||||||||||||
| TtlpPduDeviceTable | 1.3.6.1.4.1.850.1.1.3.2.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The device details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduDeviceEntry | 1.3.6.1.4.1.850.1.1.3.2.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing device details for a particular pdu.
| |||||||||||||||||||||
| CtlpPduDeviceMainLoadState | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.1 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The current state of the main output of the device.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduDeviceMainLoadControllable | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the main output is controllable, and whether the ups can be turned off and on. | |||||||||||||||||||||
| CtlpPduDeviceMainLoadCommand | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
| |||||||||||||||||||||
| CtlpPduDevicePowerOnDelay | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. For devices with multiple AC input sources, this delay only applies to the primary input source.
| |||||||||||||||||||||
| CtlpPduDeviceTotalInputPowerRating | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDeviceTemperatureC | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the pdu casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDeviceTemperatureF | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the pdu casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDevicePhaseImbalance | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.8 | INTEGER (0..200) | RO | ||||||||||||||||||
column · INTEGER (0..200) · read-only · current The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all load is on a single phase, the imbalance is defined as 100%.
| |||||||||||||||||||||
| CtlpPduDeviceOutputActivePowerTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The AC output total true power for all circuits.
| |||||||||||||||||||||
| CtlpPduDeviceAggregatePowerFactor | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate power factor of all phases.
| |||||||||||||||||||||
| CtlpPduDeviceOutputCurrentPrecision | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Output current is reported by tlpPduOutputCurrent, tlpPduOutputCurrentMin and tlpPduOutputCurrentMax. These values are all reported in hundredths(0.01A), which accommodates all models; however, on any given device the actual precision may vary. All current values must be divided by 100 to obtain the actual value. For example, if tlpPduOutputCurrent reports 500, then the actual output current is 5.00. This tlpPduDeviceOutputCurrentPrecision defines the actual resolution of that value: wholeNumber(0) is 5, tenths(1) is 5.0 and hundredths(2) is 5.00.
| |||||||||||||||||||||
| CtlpPduDeviceGeneralFault | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.12 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the pdu is in a fault condition. When the pdu is in such a fault condition, the condition can be cleared with tlpPduControlResetGeneralFault. | |||||||||||||||||||||
| CtlpPduDeviceTotalOutputUtilization | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total percentage of the pdu power capacity presently being used on the pdu. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDeviceOutputApparentPowerTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The AC output total apparent power for all circuits. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDeviceOutputReactivePowerTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The AC output total reactive power for all circuits. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduDeviceOutputCurrentTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The total output current, in hundredths of amps.The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
| |||||||||||||||||||||
| CtlpPduDeviceWattHoursTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpPduControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpPduDevicePeakPowerTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpPduControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| CtlpPduDevice24hrEnergyTotal | 1.3.6.1.4.1.850.1.1.3.2.2.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption using present value of tlpPduOutputPowerKW.
| |||||||||||||||||||||
| NtlpPduDetail | 1.3.6.1.4.1.850.1.1.3.2.3 | ||||||||||||||||||||
| NtlpPduInput | 1.3.6.1.4.1.850.1.1.3.2.3.1 | ||||||||||||||||||||
| TtlpPduInputTable | 1.3.6.1.4.1.850.1.1.3.2.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The input details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of pdus managed by the agent as reported by tlpPduIdentNumPdus. | |||||||||||||||||||||
| RtlpPduInputEntry | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular pdu managed by this agent.
| |||||||||||||||||||||
| CtlpPduInputNominalVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.1 | Unsigned32 | RO | 230 | |||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputNominalVoltagePhaseToPhase | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage as measured from phase to phase. This value may not be supported on all models. If not supported, this value will always return zero.
| |||||||||||||||||||||
| CtlpPduInputNominalVoltagePhaseToNeutral | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage as measured from phase to neutral. This value may not be supported on all models. If not supported, this value will always return zero.
| |||||||||||||||||||||
| CtlpPduInputLowTransferVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.4 | Unsigned32 | RO | 1340 | |||||||||||||||||
column · Unsigned32 · read-only · current The minimum line voltage allowed before the unit disconnects the AC input connection. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. When supported, the minimum and maximum values allowed are dictated by tlpPduInputLowTransferVoltageLowerBound and tlpPduInputLowTransferVoltageUpperBound respectively.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputLowTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpPduInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpPduInputLowTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpPduInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpPduInputHighTransferVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum line voltage allowed before the unit disconnects the AC input connection. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. When supported, the minimum and maximum values allowed are dictated by tlpPduInputHighTransferVoltageLowerBound and tlpPduInputHighTransferVoltageUpperBound respectively.
| |||||||||||||||||||||
| CtlpPduInputHighTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpPduInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpPduInputHighTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpPduInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpPduInputCurrentLimit | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The capacity of each phase conductor in the pdu limited by the AC input cord or any other potential limiting factors unique to a given unit.
| |||||||||||||||||||||
| CtlpPduInputCurrentTotal | 1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate total of conductor currents. If the pdu does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpPduInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.2.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The input phase details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumInputs and tlpPduIdentNumPhases per each device. | |||||||||||||||||||||
| RtlpPduInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpPduInputPhaseIndex | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu phase. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputPhasePhaseType | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes whether measurements are phase to neutral(0) or phase to phase(1).
| |||||||||||||||||||||
| CtlpPduInputPhaseFrequency | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.3 | Unsigned32 | RO | 599 | |||||||||||||||||
column · Unsigned32 · read-only · current The present input frequency for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputPhaseVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.4 | Unsigned32 | RO | 2070 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input voltage for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputPhaseVoltageMin | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.5 | Unsigned32 | RW | 730 | |||||||||||||||||
column · Unsigned32 · read-write · current The minimum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpPduInputPhaseVoltageMin or tlpPduInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpPduControlResetInputVoltageMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputPhaseVoltageMax | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.6 | Unsigned32 | RW | 2092 | |||||||||||||||||
column · Unsigned32 · read-write · current The maximum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpPduInputPhaseVoltageMin or tlpPduInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpPduControlResetInputVoltageMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduInputPhaseCurrent | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input current for a given phase.
| |||||||||||||||||||||
| CtlpPduInputPhasePower | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input true power.
| |||||||||||||||||||||
| CtlpPduInputPhaseThdVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The voltage thd (total harmonic distortion) for this phase in hundredths of a percent.
| |||||||||||||||||||||
| NtlpPduOutput | 1.3.6.1.4.1.850.1.1.3.2.3.2 | ||||||||||||||||||||
| TtlpPduOutputTable | 1.3.6.1.4.1.850.1.1.3.2.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The output details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutputs per each device. | |||||||||||||||||||||
| RtlpPduOutputEntry | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing output information applicable to a particular phase managed by this agent. | |||||||||||||||||||||
| CtlpPduOutputIndex | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu phase. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputPhase | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the phase associated with the output line.
| |||||||||||||||||||||
| CtlpPduOutputPhaseType | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes whether measurements are phase to neutral(0) or phase to phase(1).
| |||||||||||||||||||||
| CtlpPduOutputVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.4 | Unsigned32 | RO | 2070 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given output line.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputCurrent | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.5 | Unsigned32 | RO | 100 | |||||||||||||||||
column · Unsigned32 · read-only · current The output current, in hundredths of amps, for a given phase. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputCurrentMin | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.6 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current The minimum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision. Use tlpPduControlResetOutputCurrentMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputCurrentMax | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.7 | Unsigned32 | RO | 100 | |||||||||||||||||
column · Unsigned32 · read-only · current The maximum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision. Use tlpPduControlResetOutputCurrentMinMax to reset this value.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputActivePower | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.8 | Unsigned32 | RO | 207 | |||||||||||||||||
column · Unsigned32 · read-only · current The output power for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputPowerFactor | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The output power factor ratio for a given phase.
| |||||||||||||||||||||
| CtlpPduOutputSource | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.10 | INTEGER | RO | 3 | |||||||||||||||||
column · INTEGER · read-only · current The present source of output power. The enumeration none(0) indicates that there is no source of output power (and therefore no output power), for example, the pdu has an open circuit breaker.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputFrequency | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.11 | Unsigned32 | RO | 599 | |||||||||||||||||
column · Unsigned32 · read-only · current The present output frequency. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputPowerKVA | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.12 | Unsigned32 | RO | 21 | |||||||||||||||||
column · Unsigned32 · read-only · current The amount of active power being used.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputPowerKW | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.13 | Unsigned32 | RO | 20 | |||||||||||||||||
column · Unsigned32 · read-only · current The amount of active power being used.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutput24hrEnergy | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.14 | Unsigned32 | RO | 470 | |||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption using present value of tlpPduOutputPowerKW.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutputApparentPower | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The amount of apparent power being used.
| |||||||||||||||||||||
| CtlpPduOutputReactivePower | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The amount of reactive power being used.
| |||||||||||||||||||||
| CtlpPduOutputUtilization | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of the ats power capacity presently being used on this output line.
| |||||||||||||||||||||
| CtlpPduOutputWattHours | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpPduControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpPduOutputPeakPower | 1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpPduControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| NtlpPduOutlet | 1.3.6.1.4.1.850.1.1.3.2.3.3 | ||||||||||||||||||||
| TtlpPduOutletTable | 1.3.6.1.4.1.850.1.1.3.2.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The receptacle status details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutlets per each device. | |||||||||||||||||||||
| RtlpPduOutletEntry | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet managed by this agent. | |||||||||||||||||||||
| CtlpPduOutletIndex | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletName | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.2 | DisplayString | RW | Load 1 | |||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the name of the outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletDescription | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.3 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the device(s) connected to the given outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletState | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.4 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletControllable | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.5 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is controllable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletCommand | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.6 | INTEGER | RW | idle(0) | |||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpPduSupportsOutletVoltage.
| |||||||||||||||||||||
| CtlpPduOutletCurrent | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpPduSupportsOutletCurrent.
| |||||||||||||||||||||
| CtlpPduOutletActivePower | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The output active power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpPduSupportsOutletActivePower.
| |||||||||||||||||||||
| CtlpPduOutletRampAction | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.10 | INTEGER | RW | turnOnAfterDelay(1) | |||||||||||||||||
column · INTEGER · read-write · current The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletRampDelay | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.11 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletShedAction | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.12 | INTEGER | RW | remainOn(0) | |||||||||||||||||
column · INTEGER · read-write · current The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletShedDelay | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.13 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletGroup | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.14 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The tlpPduOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletBank | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.15 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This is reported as a bank number, but it is rather an internal number unrelated to a bank as silk-screened on many devices and is unrelated to and often confused with tlpPduOutletCircuit. The value reported is of no commercial use and was deprecated in agent version 20. | |||||||||||||||||||||
| CtlpPduOutletCircuit | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.16 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current Indicates on which circuit the given outlet is wired. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletPhase | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.17 | INTEGER | RO | phase1(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates on which phase or phases the given outlet is associated. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletReceptacleType | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.18 | INTEGER | RO | unknown(0) | |||||||||||||||||
column · INTEGER · read-only · current The type of receptacle for this outlet. Not all devices report receptacle types. The value will return unknown(0) when not supported.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduOutletPowerFactor | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power factor ratio for this outlet.
| |||||||||||||||||||||
| CtlpPduOutletApparentPower | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The apparent power of this outlet.
| |||||||||||||||||||||
| CtlpPduOutletReactivePower | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The reactive power of this outlet.
| |||||||||||||||||||||
| CtlpPduOutletFrequency | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The frequency of this outlet.
| |||||||||||||||||||||
| CtlpPduOutletUtilization | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of utilization of this outlet.
| |||||||||||||||||||||
| CtlpPduOutlet24hrEnergy | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption of this outlet.
| |||||||||||||||||||||
| CtlpPduOutletOvercurrent | 1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.25 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is in an overcurrent condition. | |||||||||||||||||||||
| TtlpPduOutletGroupTable | 1.3.6.1.4.1.850.1.1.3.2.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The receptacle grouping details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutletGroups per each device. | |||||||||||||||||||||
| RtlpPduOutletGroupEntry | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet group managed by this agent. | |||||||||||||||||||||
| CtlpPduOutletGroupIndex | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu outlet group. | |||||||||||||||||||||
| CtlpPduOutletGroupRowStatus | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpPduOutletGroupTable | |||||||||||||||||||||
| CtlpPduOutletGroupName | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of this outlet group. | |||||||||||||||||||||
| CtlpPduOutletGroupDescription | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A description for this outlet group. | |||||||||||||||||||||
| CtlpPduOutletGroupState | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
| |||||||||||||||||||||
| CtlpPduOutletGroupCommand | 1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
| |||||||||||||||||||||
| NtlpPduCircuit | 1.3.6.1.4.1.850.1.1.3.2.3.4 | ||||||||||||||||||||
| TtlpPduCircuitTable | 1.3.6.1.4.1.850.1.1.3.2.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of pdu circuit table entries. The number of entries is given by the value of tlpPduIdentNumCircuits. | |||||||||||||||||||||
| RtlpPduCircuitEntry | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular circuit managed by this agent. | |||||||||||||||||||||
| CtlpPduCircuitIndex | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu circuit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduCircuitPhase | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates on which phase or phases the given circuit is wired. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
| |||||||||||||||||||||
| CtlpPduCircuitInputVoltage | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The input voltage for a circuit.
| |||||||||||||||||||||
| CtlpPduCircuitTotalCurrent | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.4 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The total current, in hundredths of amps, for all receptacles in a given circuit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduCircuitCurrentLimit | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current capacity, in hundredths of amps, of a circuit in the pdu limited by the circuit breaker or wiring used in a given unit.
| |||||||||||||||||||||
| CtlpPduCircuitCurrentMin | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The minimum total current, in hundredths of amps, for all receptacles in a given circuit since last reset.
| |||||||||||||||||||||
| CtlpPduCircuitCurrentMax | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum total current, in hundredths of amps, for all receptacles in a given circuit since last reset.
| |||||||||||||||||||||
| CtlpPduCircuitTotalPower | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total power for all receptacles in a given circuit.
| |||||||||||||||||||||
| CtlpPduCircuitPowerFactor | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power factor ratio for all receptacles in a given circuit.
| |||||||||||||||||||||
| CtlpPduCircuitUtilization | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of utilization of a given circuit. This is typically a calculation of tlpPduCircuitTotalCurrent / tlpPduCircuitCurrentLimit.
| |||||||||||||||||||||
| CtlpPduCircuitApparentPower | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The apparent power of a given circuit.
| |||||||||||||||||||||
| CtlpPduCircuitReactivePower | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The reactive power of a given circuit.
| |||||||||||||||||||||
| CtlpPduCircuitFrequency | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The frequency of a given circuit.
| |||||||||||||||||||||
| CtlpPduCircuitWattHours | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpPduControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpPduCircuitPeakPower | 1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpPduControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| NtlpPduBreaker | 1.3.6.1.4.1.850.1.1.3.2.3.5 | ||||||||||||||||||||
| TtlpPduBreakerTable | 1.3.6.1.4.1.850.1.1.3.2.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of pdu circuit breaker table entries. The number of entries is given by the value of tlpPduIdentNumBreakers. | |||||||||||||||||||||
| RtlpPduBreakerEntry | 1.3.6.1.4.1.850.1.1.3.2.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular circuit breaker managed by this agent. | |||||||||||||||||||||
| CtlpPduBreakerIndex | 1.3.6.1.4.1.850.1.1.3.2.3.5.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu circuit breaker. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpPduBreakerStatus | 1.3.6.1.4.1.850.1.1.3.2.3.5.1.1.2 | INTEGER | RO | closed(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates whether the circuit breaker is open(0), closed(1) or not installed(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NtlpPduHeatsink | 1.3.6.1.4.1.850.1.1.3.2.3.6 | ||||||||||||||||||||
| TtlpPduHeatsinkTable | 1.3.6.1.4.1.850.1.1.3.2.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of pdu heatsink thermistor table entries. The number of entries is given by the value of tlpPduIdentNumHeatsinks. | |||||||||||||||||||||
| RtlpPduHeatsinkEntry | 1.3.6.1.4.1.850.1.1.3.2.3.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular heatsink thermistor managed by this agent. | |||||||||||||||||||||
| CtlpPduHeatsinkIndex | 1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the pdu heatsink thermistor. | |||||||||||||||||||||
| CtlpPduHeatsinkStatus | 1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the heatsink thermistor is available. The entry will return notAvailable(0) if a thermistor is either non-existent or disconnected, or available(1) when connected.
| |||||||||||||||||||||
| CtlpPduHeatsinkTemperatureC | 1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Celsius. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpPduHeatsinkTemperatureF | 1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Fahrenheit. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpPduControl | 1.3.6.1.4.1.850.1.1.3.2.4 | ||||||||||||||||||||
| TtlpPduControlTable | 1.3.6.1.4.1.850.1.1.3.2.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The actionable controls for each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduControlEntry | 1.3.6.1.4.1.850.1.1.3.2.4.1.1 | NA | |||||||||||||||||||
| CtlpPduControlRamp | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated ramp sequence on the pdu. | |||||||||||||||||||||
| CtlpPduControlShed | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated shed sequence on the pdu. | |||||||||||||||||||||
| CtlpPduControlPduOn | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the pdu on. | |||||||||||||||||||||
| CtlpPduControlPduOff | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.4 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the pdu off. | |||||||||||||||||||||
| CtlpPduControlPduRestart | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to restart the pdu. | |||||||||||||||||||||
| CtlpPduControlResetGeneralFault | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.6 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the general fault alarm indicated by tlpPduDeviceGeneralFault. | |||||||||||||||||||||
| CtlpPduControlResetWattHours | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.7 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpPduDeviceWattHoursTotal, tlpPduOutputWattHours and tlpPduCircuitWattHours calculation algorithms. | |||||||||||||||||||||
| CtlpPduControlResetPeakPower | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.8 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpPduCircuitPeakPower and tlpPduOutputPeakPower calculation algorithms. | |||||||||||||||||||||
| CtlpPduControlClearEventLog | 1.3.6.1.4.1.850.1.1.3.2.4.1.1.9 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to clear the event log retained by the pdu. | |||||||||||||||||||||
| TtlpPduControlOutputPhaseTable | 1.3.6.1.4.1.850.1.1.3.2.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The actionable output phase-specific controls for each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduControlOutputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.2.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output phase managed by this agent. | |||||||||||||||||||||
| CtlpPduControlResetOutputCurrentMinMax | 1.3.6.1.4.1.850.1.1.3.2.4.2.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpPduOutputCurrentMin and tlpPduOutputCurrentMax to their appropriate minimum and maximum values. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| TtlpPduControlInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.2.4.3 | NA | |||||||||||||||||||
table · not-accessible · current The actionable input phase-specific controls for each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. | |||||||||||||||||||||
| RtlpPduControlInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.2.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpPduControlResetInputVoltageMinMax | 1.3.6.1.4.1.850.1.1.3.2.4.3.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpPduInputPhaseVoltageMin and tlpPduInputPhaseVoltageMax to their appropriate minimum and maximum values. Resetting the minimum and maximum values for one phase on some devices will reset the values for all phases. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| NtlpPduConfig | 1.3.6.1.4.1.850.1.1.3.2.5 | ||||||||||||||||||||
| TtlpPduConfigTable | 1.3.6.1.4.1.850.1.1.3.2.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. Not all options are available on all pdus. | |||||||||||||||||||||
| RtlpPduConfigEntry | 1.3.6.1.4.1.850.1.1.3.2.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configuration options for a particular pdu.
| |||||||||||||||||||||
| CtlpPduConfigInputVoltage | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. | |||||||||||||||||||||
| CtlpPduConfigIsoBreakerSetting | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The IsoBreaker feature uses software to eliminate the cause of an overcurrent before the circuit break trips. If a specific outlet has an overcurrent, this outlet is probably the cause, and this outlet should be turned off. This setting specifies whether the pdu turns off outlets to correct overcurrent.
| |||||||||||||||||||||
| CtlpPduConfigRelayCalibrationSetting | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether to automatically self-calibrate the relays on the device.
| |||||||||||||||||||||
| CtlpPduConfigThdSetting | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the total harmonic distortion features on the device are enabled.
| |||||||||||||||||||||
| CtlpPduConfigWaveformCaptureSetting | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the device will capture waveforms to associate with logged events.
| |||||||||||||||||||||
| CtlpPduConfigRemoteResetSetting | 1.3.6.1.4.1.850.1.1.3.2.5.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the LX Card can be remotely reset via a Wake-On-LAN (WOL) packet.
| |||||||||||||||||||||
| TtlpPduConfigOutputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.2.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. Not all options are available on all pdus. | |||||||||||||||||||||
| RtlpPduConfigOutputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.2.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing threshold configuration options for a particular pdu. | |||||||||||||||||||||
| CtlpPduConfigOutputCurrentThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value, in hundredths of amps, used together with output current high/low threshold to evaluate output current high/low condition. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
| |||||||||||||||||||||
| CtlpPduConfigOutputCurrentHighThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value, in hundredths of amps, at which an output current high condition is declared. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
| |||||||||||||||||||||
| CtlpPduConfigOutputCurrentLowThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value, in hundredths of amps, at which an output current low condition is declared. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
| |||||||||||||||||||||
| CtlpPduConfigOutputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.4 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpPduConfigOutputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigOutputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigOutputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigOutputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.2.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low critical condition is declared.
| |||||||||||||||||||||
| TtlpPduConfigInputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.2.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The input phase configuration details for each pdu in device table. This is a sparse dependent table, and will contain the number of entries based on the number of pdus managed by the agent as reported by tlpPduIdentNumPdu and tlpPduIdentNumPhases. Not all options are available on all pdus. | |||||||||||||||||||||
| RtlpPduConfigInputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.2.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpPduConfigInputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.2.5.3.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpPduConfigInputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.3.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigInputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.3.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigInputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.3.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpPduConfigInputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.3.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low critical condition is declared.
| |||||||||||||||||||||
| TtlpPduConfigThresholdTable | 1.3.6.1.4.1.850.1.1.3.2.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The configurable threshold options of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. Not all options are available on all pdus. | |||||||||||||||||||||
| RtlpPduConfigThresholdEntry | 1.3.6.1.4.1.850.1.1.3.2.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configurable threshold options for a particular pdu.
| |||||||||||||||||||||
| CtlpPduConfigThdOutOfRangeThreshold | 1.3.6.1.4.1.850.1.1.3.2.5.4.1.1 | Unsigned32 (1..9999) | RW | ||||||||||||||||||
column · Unsigned32 (1..9999) · read-write · current Denotes the percentage of THD voltage in hundredths of a percent at which the THD voltage out of range condition occurs. The out of range condition, tlpPduAlarmThdOutOfRange, is triggered when the THD voltage exceeds this value.
| |||||||||||||||||||||
| NtlpEnvirosense | 1.3.6.1.4.1.850.1.1.3.3 | ||||||||||||||||||||
| NtlpEnvIdent | 1.3.6.1.4.1.850.1.1.3.3.1 | ||||||||||||||||||||
| StlpEnvIdentNumEnvirosense | 1.3.6.1.4.1.850.1.1.3.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of envirosense devices that this agent is currently managing. | |||||||||||||||||||||
| TtlpEnvIdentTable | 1.3.6.1.4.1.850.1.1.3.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The identity details of each envirosense in device table. This is a sparse dependent table, and will contain some subset of devices that are envirosenses. | |||||||||||||||||||||
| RtlpEnvIdentEntry | 1.3.6.1.4.1.850.1.1.3.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing details for a particular envirosense.
| |||||||||||||||||||||
| CtlpEnvIdentTempSupported | 1.3.6.1.4.1.850.1.1.3.3.1.2.1.1 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not temperature is supported. | |||||||||||||||||||||
| CtlpEnvIdentHumiditySupported | 1.3.6.1.4.1.850.1.1.3.3.1.2.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not humidity is supported. | |||||||||||||||||||||
| CtlpEnvNumInputContacts | 1.3.6.1.4.1.850.1.1.3.3.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of input contacts supported by the envirosense. | |||||||||||||||||||||
| CtlpEnvNumOutputContacts | 1.3.6.1.4.1.850.1.1.3.3.1.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of output contacts supported by the envirosense. | |||||||||||||||||||||
| NtlpEnvDetail | 1.3.6.1.4.1.850.1.1.3.3.3 | ||||||||||||||||||||
| TtlpEnvTemperatureTable | 1.3.6.1.4.1.850.1.1.3.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The temperature details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpEnvTemperatureEntry | 1.3.6.1.4.1.850.1.1.3.3.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing temperature details for a particular envirosense.
| |||||||||||||||||||||
| CtlpEnvTemperatureC | 1.3.6.1.4.1.850.1.1.3.3.3.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature.
| |||||||||||||||||||||
| CtlpEnvTemperatureF | 1.3.6.1.4.1.850.1.1.3.3.3.1.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature.
| |||||||||||||||||||||
| CtlpEnvTemperatureInAlarm | 1.3.6.1.4.1.850.1.1.3.3.3.1.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not temperature is in alarm. | |||||||||||||||||||||
| TtlpEnvHumidityTable | 1.3.6.1.4.1.850.1.1.3.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The humidity details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpEnvHumidityEntry | 1.3.6.1.4.1.850.1.1.3.3.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing humidity details for a particular envirosense.
| |||||||||||||||||||||
| CtlpEnvHumidityHumidity | 1.3.6.1.4.1.850.1.1.3.3.3.2.1.1 | INTEGER (0..100) | RO | ||||||||||||||||||
column · INTEGER (0..100) · read-only · current The ambient humidity.
| |||||||||||||||||||||
| CtlpEnvHumidityInAlarm | 1.3.6.1.4.1.850.1.1.3.3.3.2.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not humidity is in alarm. | |||||||||||||||||||||
| TtlpEnvInputContactTable | 1.3.6.1.4.1.850.1.1.3.3.3.3 | NA | |||||||||||||||||||
table · not-accessible · current The input contact details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpEnvInputContactEntry | 1.3.6.1.4.1.850.1.1.3.3.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing input contact details for a particular envirosense. | |||||||||||||||||||||
| CtlpEnvInputContactIndex | 1.3.6.1.4.1.850.1.1.3.3.3.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the envirosense input contact details. | |||||||||||||||||||||
| CtlpEnvInputContactName | 1.3.6.1.4.1.850.1.1.3.3.3.3.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name or description of the contact. | |||||||||||||||||||||
| CtlpEnvInputContactNormalState | 1.3.6.1.4.1.850.1.1.3.3.3.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The normal operating position of the contact.
| |||||||||||||||||||||
| CtlpEnvInputContactCurrentState | 1.3.6.1.4.1.850.1.1.3.3.3.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the contact.
| |||||||||||||||||||||
| CtlpEnvInputContactInAlarm | 1.3.6.1.4.1.850.1.1.3.3.3.3.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the contact is in alarm. | |||||||||||||||||||||
| TtlpEnvOutputContactTable | 1.3.6.1.4.1.850.1.1.3.3.3.4 | NA | |||||||||||||||||||
table · not-accessible · current The output contact details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices. | |||||||||||||||||||||
| RtlpEnvOutputContactEntry | 1.3.6.1.4.1.850.1.1.3.3.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing output contact details for a particular envirosense. | |||||||||||||||||||||
| CtlpEnvOutputContactIndex | 1.3.6.1.4.1.850.1.1.3.3.3.4.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the envirosense output contact details. | |||||||||||||||||||||
| CtlpEnvOutputContactName | 1.3.6.1.4.1.850.1.1.3.3.3.4.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name or description of the contact. | |||||||||||||||||||||
| CtlpEnvOutputContactNormalState | 1.3.6.1.4.1.850.1.1.3.3.3.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The normal operating position of the contact.
| |||||||||||||||||||||
| CtlpEnvOutputContactCurrentState | 1.3.6.1.4.1.850.1.1.3.3.3.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the contact. Use tlpEnvControlOutputContactOpen and tlpEnvControlOutputContactClose to change the state of the output contact.
| |||||||||||||||||||||
| CtlpEnvOutputContactInAlarm | 1.3.6.1.4.1.850.1.1.3.3.3.4.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the contact is in alarm. | |||||||||||||||||||||
| NtlpEnvControl | 1.3.6.1.4.1.850.1.1.3.3.4 | ||||||||||||||||||||
| TtlpEnvControlOutputContactTable | 1.3.6.1.4.1.850.1.1.3.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The actionable controls for each sensor in device table. This is a sparse dependent table, and will contain some subset of devices that are sensors. | |||||||||||||||||||||
| RtlpEnvControlOutputContactEntry | 1.3.6.1.4.1.850.1.1.3.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing controls for a particular pdu. | |||||||||||||||||||||
| CtlpEnvControlOutputContactOpen | 1.3.6.1.4.1.850.1.1.3.3.4.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to open this output contact. | |||||||||||||||||||||
| CtlpEnvControlOutputContactClose | 1.3.6.1.4.1.850.1.1.3.3.4.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to close this output contact. | |||||||||||||||||||||
| NtlpEnvConfig | 1.3.6.1.4.1.850.1.1.3.3.5 | ||||||||||||||||||||
| TtlpEnvConfigTable | 1.3.6.1.4.1.850.1.1.3.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each envirosense in device table. This is a sparse dependent table, and will contain some subset of devices that are envirosenses. Not all options are available on all envirosenses. | |||||||||||||||||||||
| RtlpEnvConfigEntry | 1.3.6.1.4.1.850.1.1.3.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configuration options for a particular envirosenses.
| |||||||||||||||||||||
| CtlpEnvTemperatureLowLimit | 1.3.6.1.4.1.850.1.1.3.3.5.1.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The lower alarm limit for ambient temperature.
| |||||||||||||||||||||
| CtlpEnvTemperatureHighLimit | 1.3.6.1.4.1.850.1.1.3.3.5.1.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The upper alarm limit for ambient temperature.
| |||||||||||||||||||||
| CtlpEnvHumidityLowLimit | 1.3.6.1.4.1.850.1.1.3.3.5.1.1.3 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current The lower alarm limit for ambient humidity.
| |||||||||||||||||||||
| CtlpEnvHumidityHighLimit | 1.3.6.1.4.1.850.1.1.3.3.5.1.1.4 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current The upper alarm limit for ambient humidity.
| |||||||||||||||||||||
| NtlpAts | 1.3.6.1.4.1.850.1.1.3.4 | ||||||||||||||||||||
| NtlpAtsIdent | 1.3.6.1.4.1.850.1.1.3.4.1 | ||||||||||||||||||||
| StlpAtsIdentNumAts | 1.3.6.1.4.1.850.1.1.3.4.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of ats devices that this agent is currently managing. | |||||||||||||||||||||
| TtlpAtsIdentTable | 1.3.6.1.4.1.850.1.1.3.4.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The identity details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsIdentEntry | 1.3.6.1.4.1.850.1.1.3.4.1.2.1 | NA | |||||||||||||||||||
| CtlpAtsIdentNumInputs | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of inputs supported by the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumOutputs | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of outputs supported by the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumPhases | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of phases per input supported by the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumOutlets | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of receptacles supported by the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumOutletGroups | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of user-defined receptacle groups created for the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumCircuits | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of circuits supported by the ats. | |||||||||||||||||||||
| CtlpAtsIdentNumBreakers | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of monitored circuit breakers supported by the ats. If the ats has breakers that are not monitored by the device, the value of zero(0) will be returned. | |||||||||||||||||||||
| CtlpAtsIdentNumHeatsinks | 1.3.6.1.4.1.850.1.1.3.4.1.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of heatsink thermistors supported by the ats. | |||||||||||||||||||||
| TtlpAtsSupportsTable | 1.3.6.1.4.1.850.1.1.3.4.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The supported details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsSupportsEntry | 1.3.6.1.4.1.850.1.1.3.4.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing supported details for a particular ats.
| |||||||||||||||||||||
| CtlpAtsSupportsEnergywise | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.1 | TruthValue | RO | deprecated | |||||||||||||||||
column · TruthValue · read-only · deprecated Indicates whether the ats supports Cisco EnergyWise. | |||||||||||||||||||||
| CtlpAtsSupportsRampShed | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ats supports ramping and shedding. | |||||||||||||||||||||
| CtlpAtsSupportsOutletGroup | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ats supports outlet groups. | |||||||||||||||||||||
| CtlpAtsSupportsOutletCurrent | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.4 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ats reports individual receptacle current measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpAtsOutletCurrent. | |||||||||||||||||||||
| CtlpAtsSupportsOutletVoltage | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ats reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpAtsOutletVoltage. | |||||||||||||||||||||
| CtlpAtsSupportsOutletActivePower | 1.3.6.1.4.1.850.1.1.3.4.1.3.1.6 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether the ats reports individual receptacle power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpAtsOutletActivePower. | |||||||||||||||||||||
| TtlpAtsDisplayTable | 1.3.6.1.4.1.850.1.1.3.4.1.4 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The display details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsDisplayEntry | 1.3.6.1.4.1.850.1.1.3.4.1.4.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated An entry containing display details for a particular ats.
| |||||||||||||||||||||
| CtlpAtsDisplayScheme | 1.3.6.1.4.1.850.1.1.3.4.1.4.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the display scheme of the LED display. The value schemeReverse(0) indicates the tricolor LED indicator uses an alternate pattern. The value schemeNormal(1) indicates the LED indicator uses the standard pattern. This value may not be supported on all models. If not supported, the value will always return schemeNormal(1).
| |||||||||||||||||||||
| CtlpAtsDisplayOrientation | 1.3.6.1.4.1.850.1.1.3.4.1.4.1.2 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the physical orientation of the LED display. The value displayNormal(0) indicates the display is right-side-up (normal). The value displayReverse(1) indicates the display is upside-down. This value may not be supported on all models. If not supported, the value will always return displayNormal(0).
| |||||||||||||||||||||
| CtlpAtsDisplayAutoScroll | 1.3.6.1.4.1.850.1.1.3.4.1.4.1.3 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates whether the LED display automatically scrolls through displaying status values.
| |||||||||||||||||||||
| CtlpAtsDisplayIntensity | 1.3.6.1.4.1.850.1.1.3.4.1.4.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the intensity, as a percentage, of the LED display. The value intensity100(4) indicates the display is at 100% intensity. The other values indicate the display is at a lesser intensity based upon the respective percentage denoted.
| |||||||||||||||||||||
| CtlpAtsDisplayUnits | 1.3.6.1.4.1.850.1.1.3.4.1.4.1.5 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates the units of measurement displayed on the LED display. The value normal(0) indicates that a temperature value, for example, is displayed in degrees Fahrenheit. The value metric(1) indicates a temperature value is displayed in degrees Celsius.
| |||||||||||||||||||||
| NtlpAtsDevice | 1.3.6.1.4.1.850.1.1.3.4.2 | ||||||||||||||||||||
| TtlpAtsDeviceTable | 1.3.6.1.4.1.850.1.1.3.4.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The device details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsDeviceEntry | 1.3.6.1.4.1.850.1.1.3.4.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing device details for a particular ats.
| |||||||||||||||||||||
| CtlpAtsDeviceMainLoadState | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the main output of the device.
| |||||||||||||||||||||
| CtlpAtsDeviceMainLoadControllable | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the main output is controllable, and whether the ups can be turned off and on. | |||||||||||||||||||||
| CtlpAtsDeviceMainLoadCommand | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
| |||||||||||||||||||||
| CtlpAtsDevicePowerOnDelay | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. For devices with multiple AC input sources, this delay only applies to the primary input source.
| |||||||||||||||||||||
| CtlpAtsDeviceTotalInputPowerRating | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsDeviceTemperatureC | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsDeviceTemperatureF | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsDevicePhaseImbalance | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.8 | INTEGER (0..200) | RO | ||||||||||||||||||
column · INTEGER (0..200) · read-only · current The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all load is on a single phase, the imbalance is defined as 100%.
| |||||||||||||||||||||
| CtlpAtsDeviceOutputActivePowerTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The AC output total true power for all circuits.
| |||||||||||||||||||||
| CtlpAtsDeviceAggregatePowerFactor | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate power factor of all phases.
| |||||||||||||||||||||
| CtlpAtsDeviceOutputCurrentPrecision | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Output current is reported by tlpAtsOutputCurrent, tlpAtsOutputCurrentMin and tlpAtsOutputCurrentMax. These values are all reported in hundredths (0.01A), which accommodates all models; however, on any given device the actual precision may vary. This value describes the actual precision, which can be used as a divisor against the output current values to obtain the true output current measurement. For example, if tlpAtsOutputCurrent reports 530 and tlpAtsDeviceOutputCurrentPrecision is tenths(1), then the actual output current is 5.3.
| |||||||||||||||||||||
| CtlpAtsDeviceGeneralFault | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.12 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Indicates whether or not the ats is in a fault condition. When the ats is in such a fault condition, the condition can be cleared with tlpAtsControlResetGeneralFault. | |||||||||||||||||||||
| CtlpAtsDeviceTotalOutputUtilization | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total percentage of the ats power capacity presently being used on the ats.
| |||||||||||||||||||||
| CtlpAtsDeviceOutputApparentPowerTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The AC output total apparent power for all circuits. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsDeviceOutputReactivePowerTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The AC output total reactive power for all circuits. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsDeviceOutputCurrentTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The total output current, in hundredths of amps.The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision.
| |||||||||||||||||||||
| CtlpAtsDeviceWattHoursTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpAtsControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpAtsDevicePeakPowerTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpAtsControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| CtlpAtsDevice24hrEnergyTotal | 1.3.6.1.4.1.850.1.1.3.4.2.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption using present value of tlpAtsOutputPowerKW.
| |||||||||||||||||||||
| NtlpAtsDetail | 1.3.6.1.4.1.850.1.1.3.4.3 | ||||||||||||||||||||
| NtlpAtsInput | 1.3.6.1.4.1.850.1.1.3.4.3.1 | ||||||||||||||||||||
| TtlpAtsInputTable | 1.3.6.1.4.1.850.1.1.3.4.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The input details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of atss managed by the agent as reported by tlpAtsIdentNumAts. | |||||||||||||||||||||
| RtlpAtsInputEntry | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular primary input phase managed by this agent.
| |||||||||||||||||||||
| CtlpAtsInputNominalVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpAtsInputNominalVoltagePhaseToPhase | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage as measured from phase to phase. This value may not be supported on all models. If not supported, this value will always return zero.
| |||||||||||||||||||||
| CtlpAtsInputNominalVoltagePhaseToNeutral | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The nominal value of the input line voltage as measured from phase to neutral. This value may not be supported on all models. If not supported, this value will always return zero.
| |||||||||||||||||||||
| CtlpAtsInputLowTransferVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum line voltage allowed before the unit disconnects the AC input connection.
| |||||||||||||||||||||
| CtlpAtsInputLowTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpAtsInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpAtsInputLowTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpAtsInputLowTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpAtsInputHighTransferVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum line voltage allowed before the unit disconnects the AC input connection.
| |||||||||||||||||||||
| CtlpAtsInputHighTransferVoltageLowerBound | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The lower boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpAtsInputHighTransferVoltageUpperBound | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The upper boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
| |||||||||||||||||||||
| CtlpAtsInputFairVoltageThreshold | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The voltage level at which the device will transition between sources.
| |||||||||||||||||||||
| CtlpAtsInputBadVoltageThreshold | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum line voltage allowed before the device disconnects the AC input connection.
| |||||||||||||||||||||
| CtlpAtsInputSourceAvailability | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The determination as to which of two AC input lines are available. The agent will return either inputSourceA(1) or inputSourceB(2) if only one line is available, or inputSourceAB(3) if both lines are available. The agent will never return none(0) since the device will be powered off if neither line is available.
| |||||||||||||||||||||
| CtlpAtsInputSourceInUse | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The determination as to which one of two AC input lines is in use. Not all devices support the reporting of which source is currently in use. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsInputSourceTransitionCount | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of times the device transitions between primary and secondary sources. Most devices are limited to 65533 transitions, after which the value will not increment. If not supported, this value will always return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpAtsInputCurrentLimit | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The capacity of each phase conductor in the ats limited by the AC input cord or any other potential limiting factors unique to a given unit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsInputCurrentTotal | 1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The aggregate total of conductor currents. If the ats does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpAtsInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.4.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The input phase details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumInputs and tlpAtsIdentNumPhases per each device. | |||||||||||||||||||||
| RtlpAtsInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular primary input phase managed by this agent. | |||||||||||||||||||||
| CtlpAtsInputLineIndex | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the input line on the ats. | |||||||||||||||||||||
| CtlpAtsInputPhaseIndex | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the input phase for the input line. | |||||||||||||||||||||
| CtlpAtsInputPhaseType | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes whether measurements are phase to neutral(0) or phase to phase(1).
| |||||||||||||||||||||
| CtlpAtsInputPhaseFrequency | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.4 | Unsigned32 | RO | 599 | |||||||||||||||||
column · Unsigned32 · read-only · current The present input frequency for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsInputPhaseVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.5 | Unsigned32 | RO | 1171 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input voltage for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsInputPhaseVoltageMin | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The minimum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpAtsInputPhaseVoltageMin or tlpAtsInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpAtsControlResetInputVoltageMinMax to reset this value.
| |||||||||||||||||||||
| CtlpAtsInputPhaseVoltageMax | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The maximum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpAtsInputPhaseVoltageMin or tlpAtsInputPhaseVoltageMax using agent version below 20, both will be reset to their appropriate minimum and maximum values. Writes are deprecated as of agent version 20. Use tlpAtsControlResetInputVoltageMinMax to reset this value.
| |||||||||||||||||||||
| CtlpAtsInputPhaseCurrent | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input current for a given phase.
| |||||||||||||||||||||
| CtlpAtsInputPhasePower | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present input true power.
| |||||||||||||||||||||
| CtlpAtsInputPhaseThdVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The voltage thd (total harmonic distortion) for this phase in hundredths of a percent.
| |||||||||||||||||||||
| NtlpAtsOutput | 1.3.6.1.4.1.850.1.1.3.4.3.2 | ||||||||||||||||||||
| TtlpAtsOutputTable | 1.3.6.1.4.1.850.1.1.3.4.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The output details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutputs per each device. | |||||||||||||||||||||
| RtlpAtsOutputEntry | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing output information applicable to a particular phase managed by this agent. | |||||||||||||||||||||
| CtlpAtsOutputIndex | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats phase. | |||||||||||||||||||||
| CtlpAtsOutputPhase | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the phase associated with the output line.
| |||||||||||||||||||||
| CtlpAtsOutputPhaseType | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Denotes whether measurements are phase to neutral(0) or phase to phase(1).
| |||||||||||||||||||||
| CtlpAtsOutputVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.4 | Unsigned32 | RO | 1171 | |||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given output line.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsOutputCurrent | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.5 | Unsigned32 | RO | 1300 | |||||||||||||||||
column · Unsigned32 · read-only · current The output current, in hundredths of amps, for a given phase. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsOutputCurrentMin | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The minimum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision. Use tlpAtsControlResetOutputCurrentMinMax to reset this value.
| |||||||||||||||||||||
| CtlpAtsOutputCurrentMax | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision. Use tlpAtsControlResetOutputCurrentMinMax to reset this value.
| |||||||||||||||||||||
| CtlpAtsOutputActivePower | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.8 | Unsigned32 | RO | 1523 | |||||||||||||||||
column · Unsigned32 · read-only · current The output true power for a given phase.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsOutputPowerFactor | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The output power factor ratio for a given phase.
| |||||||||||||||||||||
| CtlpAtsOutputSource | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The present source of output power. The enumeration none(0) indicates that there is no source of output power (and therefore no output power), for example, the ats has an open circuit breaker.
| |||||||||||||||||||||
| CtlpAtsOutputFrequency | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.11 | Unsigned32 | RO | 599 | |||||||||||||||||
column · Unsigned32 · read-only · current The present output frequency. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsOutputPowerKVA | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.12 | Unsigned32 | RO | 152 | |||||||||||||||||
column · Unsigned32 · read-only · current The amount of apparent power being used.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtlpAtsOutputPowerKW | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The amount of active power being used.
| |||||||||||||||||||||
| CtlpAtsOutput24hrEnergy | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption using present value of tlpAtsOutputPowerKW.
| |||||||||||||||||||||
| CtlpAtsOutputApparentPower | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The amount of apparent power being used.
| |||||||||||||||||||||
| CtlpAtsOutputReactivePower | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The amount of reactive power being used.
| |||||||||||||||||||||
| CtlpAtsOutputUtilization | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of the ats power capacity presently being used on this output line.
| |||||||||||||||||||||
| CtlpAtsOutputWattHours | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpAtsControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpAtsOutputPeakPower | 1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpAtsControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| NtlpAtsOutlet | 1.3.6.1.4.1.850.1.1.3.4.3.3 | ||||||||||||||||||||
| TtlpAtsOutletTable | 1.3.6.1.4.1.850.1.1.3.4.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The receptacle status details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutlets per each device. | |||||||||||||||||||||
| RtlpAtsOutletEntry | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet managed by this agent. | |||||||||||||||||||||
| CtlpAtsOutletIndex | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats outlet. | |||||||||||||||||||||
| CtlpAtsOutletName | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the name of the outlet. | |||||||||||||||||||||
| CtlpAtsOutletDescription | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A user-definable string identifying the device(s) connected to the given outlet. | |||||||||||||||||||||
| CtlpAtsOutletState | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet.
| |||||||||||||||||||||
| CtlpAtsOutletControllable | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.5 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is controllable. | |||||||||||||||||||||
| CtlpAtsOutletCommand | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
| |||||||||||||||||||||
| CtlpAtsOutletVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpAtsSupportsOutletVoltage.
| |||||||||||||||||||||
| CtlpAtsOutletCurrent | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpAtsSupportsOutletCurrent.
| |||||||||||||||||||||
| CtlpAtsOutletActivePower | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The output power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpAtsSupportsOutletActivePower.
| |||||||||||||||||||||
| CtlpAtsOutletRampAction | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsOutletRampDelay | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.11 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsOutletShedAction | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsOutletShedDelay | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.13 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsOutletGroup | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.14 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The tlpAtsOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped. | |||||||||||||||||||||
| CtlpAtsOutletBank | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.15 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated This is reported as a bank number, but it is rather an internal number unrelated to a bank as silk-screened on many devices and is unrelated to and often confused with tlpAtsOutletCircuit. The value reported is of no commercial use and was deprecated in agent version 20. | |||||||||||||||||||||
| CtlpAtsOutletCircuit | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Indicates on which circuit the given outlet is wired. | |||||||||||||||||||||
| CtlpAtsOutletPhase | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates on which phase or phases the given outlet is associated. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
| |||||||||||||||||||||
| CtlpAtsOutletReceptacleType | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of receptacle for this outlet. Not all devices report receptacle types. The value will return unknown(0) when not supported.
| |||||||||||||||||||||
| CtlpAtsOutletPowerFactor | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power factor ratio for this outlet.
| |||||||||||||||||||||
| CtlpAtsOutletApparentPower | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The apparent power of this outlet.
| |||||||||||||||||||||
| CtlpAtsOutletReactivePower | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The reactive power of this outlet.
| |||||||||||||||||||||
| CtlpAtsOutletFrequency | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The frequency of this outlet.
| |||||||||||||||||||||
| CtlpAtsOutletUtilization | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of utilization of this outlet.
| |||||||||||||||||||||
| CtlpAtsOutlet24hrEnergy | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Estimated 24 hour power consumption of this outlet.
| |||||||||||||||||||||
| CtlpAtsOutletOvercurrent | 1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.25 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Denotes whether this outlet is in an overcurrent condition. | |||||||||||||||||||||
| TtlpAtsOutletGroupTable | 1.3.6.1.4.1.850.1.1.3.4.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The receptacle grouping details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutletGroups per each device. | |||||||||||||||||||||
| RtlpAtsOutletGroupEntry | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular outlet group managed by this agent. | |||||||||||||||||||||
| CtlpAtsOutletGroupIndex | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats outlet group. | |||||||||||||||||||||
| CtlpAtsOutletGroupRowStatus | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpAtsOutletGroupTable | |||||||||||||||||||||
| CtlpAtsOutletGroupName | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of this outlet group. | |||||||||||||||||||||
| CtlpAtsOutletGroupDescription | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A description for this outlet group. | |||||||||||||||||||||
| CtlpAtsOutletGroupState | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
| |||||||||||||||||||||
| CtlpAtsOutletGroupCommand | 1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
| |||||||||||||||||||||
| NtlpAtsCircuit | 1.3.6.1.4.1.850.1.1.3.4.3.4 | ||||||||||||||||||||
| TtlpAtsCircuitTable | 1.3.6.1.4.1.850.1.1.3.4.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of ats circuit table entries. The number of entries is given by the value of tlpAtsIdentNumCircuits. | |||||||||||||||||||||
| RtlpAtsCircuitEntry | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular circuit managed by this agent. | |||||||||||||||||||||
| CtlpAtsCircuitIndex | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats circuit. | |||||||||||||||||||||
| CtlpAtsCircuitPhase | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates on which phase or phases the given circuit is wired. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
| |||||||||||||||||||||
| CtlpAtsCircuitInputVoltage | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The input voltage for a circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitTotalCurrent | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total current for all receptacles in a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitCurrentLimit | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current capacity of a circuit in the ats limited by the circuit breaker or wiring used in a given unit.
| |||||||||||||||||||||
| CtlpAtsCircuitCurrentMin | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The minimum total current for all receptacles in a given circuit since last reset.
| |||||||||||||||||||||
| CtlpAtsCircuitCurrentMax | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum total current for all receptacles in a given circuit since last reset.
| |||||||||||||||||||||
| CtlpAtsCircuitTotalPower | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total power for all receptacles in a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitPowerFactor | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power factor ratio for all receptacles in a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitUtilization | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The percentage of utilization of a given circuit. This is typically a calculation of tlpAtsCircuitTotalCurrent / tlpAtsCircuitCurrentLimit.
| |||||||||||||||||||||
| CtlpAtsCircuitApparentPower | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The apparent power of a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitReactivePower | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The reactive power of a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitFrequency | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The frequency of a given circuit.
| |||||||||||||||||||||
| CtlpAtsCircuitWattHours | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of watt hours of energy utilized in the past 24 hours. Use tlpAtsControlResetWattHours to reset the watt hours calculation algorithm.
| |||||||||||||||||||||
| CtlpAtsCircuitPeakPower | 1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The maximum 1 second average power value since the last reset. Use tlpAtsControlResetPeakPower to reset the peak power calculations.
| |||||||||||||||||||||
| NtlpAtsBreaker | 1.3.6.1.4.1.850.1.1.3.4.3.5 | ||||||||||||||||||||
| TtlpAtsBreakerTable | 1.3.6.1.4.1.850.1.1.3.4.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of ats circuit breaker table entries. The number of entries is given by the value of tlpAtsIdentNumBreakers. | |||||||||||||||||||||
| RtlpAtsBreakerEntry | 1.3.6.1.4.1.850.1.1.3.4.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular circuit breaker managed by this agent. | |||||||||||||||||||||
| CtlpAtsBreakerIndex | 1.3.6.1.4.1.850.1.1.3.4.3.5.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats circuit breaker. | |||||||||||||||||||||
| CtlpAtsBreakerStatus | 1.3.6.1.4.1.850.1.1.3.4.3.5.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the circuit breaker is open(0), closed(1) or not installed(2).
| |||||||||||||||||||||
| NtlpAtsHeatsink | 1.3.6.1.4.1.850.1.1.3.4.3.6 | ||||||||||||||||||||
| TtlpAtsHeatsinkTable | 1.3.6.1.4.1.850.1.1.3.4.3.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of ats heatsink thermistor table entries. The number of entries is given by the value of tlpAtsIdentNumHeatsinks. | |||||||||||||||||||||
| RtlpAtsHeatsinkEntry | 1.3.6.1.4.1.850.1.1.3.4.3.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular heatsink thermistor managed by this agent. | |||||||||||||||||||||
| CtlpAtsHeatsinkIndex | 1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the ats heatsink thermistor. | |||||||||||||||||||||
| CtlpAtsHeatsinkStatus | 1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the heatsink thermistor is available. The entry will return notAvailable(0) if a thermistor is either non-existent or disconnected, or available(1) when connected.
| |||||||||||||||||||||
| CtlpAtsHeatsinkTemperatureC | 1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Celsius. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsHeatsinkTemperatureF | 1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature at the heatsink thermistor in tenths degrees Fahrenheit. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpAtsControl | 1.3.6.1.4.1.850.1.1.3.4.4 | ||||||||||||||||||||
| TtlpAtsControlTable | 1.3.6.1.4.1.850.1.1.3.4.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The actionable controls for each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsControlEntry | 1.3.6.1.4.1.850.1.1.3.4.4.1.1 | NA | |||||||||||||||||||
| CtlpAtsControlRamp | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated ramp sequence on the ats. | |||||||||||||||||||||
| CtlpAtsControlShed | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to initiate the pre-designated shed sequence on the ats. | |||||||||||||||||||||
| CtlpAtsControlOn | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the ats on. | |||||||||||||||||||||
| CtlpAtsControlOff | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.4 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the ats off. | |||||||||||||||||||||
| CtlpAtsControlRestart | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to restart the ats. | |||||||||||||||||||||
| CtlpAtsControlResetGeneralFault | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.6 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the general fault alarm indicated by tlpAtsDeviceGeneralFault. | |||||||||||||||||||||
| CtlpAtsControlResetWattHours | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.7 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpAtsDeviceWattHoursTotal, tlpAtsOutputWattHours and tlpAtsCircuitWattHours calculation algorithms. | |||||||||||||||||||||
| CtlpAtsControlResetPeakPower | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.8 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset the tlpAtsCircuitPeakPower and tlpAtsOutputPeakPower calculation algorithms. | |||||||||||||||||||||
| CtlpAtsControlClearEventLog | 1.3.6.1.4.1.850.1.1.3.4.4.1.1.9 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to clear the event log retained by the ats. | |||||||||||||||||||||
| TtlpAtsControlOutputPhaseTable | 1.3.6.1.4.1.850.1.1.3.4.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The actionable output phase-specific controls for each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. | |||||||||||||||||||||
| RtlpAtsControlOutputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.4.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular output phase managed by this agent. | |||||||||||||||||||||
| CtlpAtsControlResetOutputCurrentMinMax | 1.3.6.1.4.1.850.1.1.3.4.4.2.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpAtsOutputCurrentMin and tlpAtsOutputCurrentMax to their appropriate minimum and maximum values. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| TtlpAtsControlInputPhaseTable | 1.3.6.1.4.1.850.1.1.3.4.4.3 | NA | |||||||||||||||||||
table · not-accessible · current The actionable input phase-specific controls for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. | |||||||||||||||||||||
| RtlpAtsControlInputPhaseEntry | 1.3.6.1.4.1.850.1.1.3.4.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpAtsControlResetInputVoltageMinMax | 1.3.6.1.4.1.850.1.1.3.4.4.3.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to reset tlpAtsInputPhaseVoltageMin and tlpAtsInputPhaseVoltageMax to their appropriate minimum and maximum values. Resetting the minimum and maximum values for one phase on some devices will reset the values for all phases. Resetting values for a phase will reset that value or values for both input sources. This value will return ERROR_NO_SUCH_NAME if not supported. | |||||||||||||||||||||
| NtlpAtsConfig | 1.3.6.1.4.1.850.1.1.3.4.5 | ||||||||||||||||||||
| TtlpAtsConfigTable | 1.3.6.1.4.1.850.1.1.3.4.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. Not all options are available on all atss. | |||||||||||||||||||||
| RtlpAtsConfigEntry | 1.3.6.1.4.1.850.1.1.3.4.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configuration options for a particular ats.
| |||||||||||||||||||||
| CtlpAtsConfigInputVoltage | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. | |||||||||||||||||||||
| CtlpAtsConfigSourceSelect | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The determination as to which of two AC input lines is designated as the primary input source. The other is designated as the secondary input source. This value will always return inputSourceA(1) for devices with a single input source. Setting this value is supported only on selected models.
| |||||||||||||||||||||
| CtlpAtsConfigSource1ReturnTime | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal time to delay a transition to Source 1, if it is the preferred source. | |||||||||||||||||||||
| CtlpAtsConfigSource2ReturnTime | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The nominal time to delay a transition to Source 2, if it is the preferred source. | |||||||||||||||||||||
| CtlpAtsConfigAutoRampOnTransition | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled(1), the ats should perform its preconfigured ramp sequence when the input source transfers from its designated secondary source to its designated primary source. This value not supported on all ats devices. If not supported, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigAutoShedOnTransition | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled(1), the ats should perform its preconfigured shed sequence when the input source transfers from its designated primary source to its designated secondary source. This value not supported on all ats devices. If not supported, then this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigIsoBreakerSetting | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The IsoBreaker feature uses software to eliminate the cause of an overcurrent before the circuit break trips. If a specific outlet has an overcurrent, this outlet is probably the cause, and this outlet should be turned off. This setting specifies the method by which the ats turns off outlets to correct overcurrent.
| |||||||||||||||||||||
| CtlpAtsConfigRelayCalibrationSetting | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether to automatically self-calibrate the relays on the device.
| |||||||||||||||||||||
| CtlpAtsConfigThdSetting | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the total harmonic distortion features on the device are enabled.
| |||||||||||||||||||||
| CtlpAtsConfigWaveformCaptureSetting | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the device will capture waveforms to associate with logged events.
| |||||||||||||||||||||
| CtlpAtsConfigRemoteResetSetting | 1.3.6.1.4.1.850.1.1.3.4.5.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Determines whether the LX Card can be remotely reset via a Wake-On-LAN (WOL) packet.
| |||||||||||||||||||||
| TtlpAtsConfigVoltageRangeOldTable | 1.3.6.1.4.1.850.1.1.3.4.5.2 | NA | obsolete | ||||||||||||||||||
table · not-accessible · obsolete The voltage range options in this table is intended to configure the operating voltages of an ats. This is a sparse dependent table, and will contain some subset of devices that are atss. All voltage points defined in this table are listed in a specific order from high to low. All voltage points must satisfy the conditions and ranges defined for each point. Any point violating any of the relative limits will be rejected. For optimal operation, it is recommended that tlpAtsConfigHighVoltageReset be set lower than tlpAtsConfigHighVoltageTransfer by a margin no less than 1% of tlpAtsConfigHighVoltageTransfer; and that tlpAtsConfigSource1TransferReset (tlpAtsConfigSource2TransferReset) be set higher than tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet) by a margin no less than 1% of tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet). *The upper limit of line voltage is tlpAtsInputHighTransferVoltageUpperBound. The lower limit of line voltage is tlpAtsInputLowTransferVoltageLowerBound. All minimum and maximum limits for each voltage point are all exclusive unless indicated otherwise. This table in its entirety is obsolete and replaced by tlpAtsConfigVoltageRangeTable. | |||||||||||||||||||||
| RtlpAtsConfigVoltageRangeOldEntry | 1.3.6.1.4.1.850.1.1.3.4.5.2.1 | NA | obsolete | ||||||||||||||||||
row · not-accessible · obsolete An entry containing voltage range configuration options for a particular ats.
| |||||||||||||||||||||
| CtlpAtsConfigHighVoltageTransferOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.1 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete The maximum line voltage allowed before the unit disconnects the AC input connection. The maximum value allowed is dictated by tlpAtsInputHighTransferVoltageUpperBound (inclusively). The minimum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. This value may not be configurable on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigHighVoltageResetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.2 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If a unit is disconnected due to over-voltage, the line voltage has to fall below this value before the unit re-connects the AC input connection. The maximum value allowed is dictated by tlpAtsConfigHighVoltageTransferOld. The minimum value allowed is dictated by the greater of tlpAtsConfigSource1TransferResetOld and tlpAtsConfigSource2TransferResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource1TransferResetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.3 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If input source 1 voltage level is above this value, a unit connected to source 2 will transition to source 1 (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. The minimum value allowed is dictated by tlpAtsConfigSource1BrownoutSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource1BrownoutSetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.4 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete This value dictates the voltage level below which source 1 goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigSource1TransferResetOld. The minimum value allowed is dictated by tlpAtsConfigSource1TransferSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource1TransferSetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.5 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If input source 1 voltage level falls below this value, a unit connected to source 1 will transition to source 2 (if it is in fair condition as denoted by tlpAtsConfigSource2TransferSetOld). The maximum value allowed is dictated by tlpAtsConfigSource1BrownoutSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource2TransferResetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.6 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If input source 2 voltage level is above this value, a unit connected to source 1 will transition to source 2 (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. The minimum value allowed is dictated by tlpAtsConfigSource2BrownoutSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource2BrownoutSetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.7 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete This value dictates the voltage level below which source 2 goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigSource2TransferResetOld. The minimum value allowed is dictated by tlpAtsConfigSource2TransferSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSource2TransferSetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.8 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If input source 2 voltage level falls below this value, a unit connected to source 2 will transition to source 1 (if it is in fair condition as denoted by tlpAtsConfigSource1TransferSetOld). The maximum value allowed is dictated by tlpAtsConfigSource2BrownoutSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigLowVoltageResetOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.9 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above this value before the unit gets connected to the AC input connection. The maximum value allowed is dictated by the lesser value of tlpAtsConfigSource1TransferSetOld and tlpAtsConfigSource2TransferSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageTransferOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigLowVoltageTransferOld | 1.3.6.1.4.1.850.1.1.3.4.5.2.1.10 | Unsigned32 | RW | obsolete | |||||||||||||||||
column · Unsigned32 · read-write · obsolete The minimum line voltage allowed before the unit disconnects the AC input connection. The maximum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. The minimum value allowed is dictated by tlpAtsInputLowTransferVoltageLowerBound (inclusively). If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpAtsConfigVoltageRangeLimitsTable | 1.3.6.1.4.1.850.1.1.3.4.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The voltage range table, as documented by tlpAtsConfigVoltageRangeTable requires that all changes adhere with stack order, from high transfer voltage down to low transfer voltage. In addition to stack order, certain voltage range values have limits defining the absolute minimum and absolute maximum for such values. Any voltage value violating any respective limit defined herein will be rejected. | |||||||||||||||||||||
| RtlpAtsConfigVoltageRangeLimitsEntry | 1.3.6.1.4.1.850.1.1.3.4.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing voltage range limits configuration options for a particular ats.
| |||||||||||||||||||||
| CtlpAtsConfigSourceBrownoutSetMinimum | 1.3.6.1.4.1.850.1.1.3.4.5.3.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This value dictates the absolute lower limit by which tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet can be set. tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet, respectively, are also used when determining the lowest value a brownout value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSourceBrownoutSetMaximum | 1.3.6.1.4.1.850.1.1.3.4.5.3.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This value dictates the absolute upper limit by which tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet can be set. tlpAtsConfigSource1TransferReset and tlpAtsConfigSource2TransferReset, respectively, are also used when determining the greatest value a brownout value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSourceTransferSetMinimum | 1.3.6.1.4.1.850.1.1.3.4.5.3.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This value dictates the absolute lower limit by which tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet can be set. tlpAtsConfigLowVoltageReset is also used when determining the lowest value a transferset value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigSourceTransferSetMaximum | 1.3.6.1.4.1.850.1.1.3.4.5.3.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This value dictates the absolute upper limit by which tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet can be set. tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet, respectively, are also used when determining the greatest value a transferset value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpAtsConfigThresholdTable | 1.3.6.1.4.1.850.1.1.3.4.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The configurable threshold options of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. Not all options are available on all atss. | |||||||||||||||||||||
| RtlpAtsConfigThresholdEntry | 1.3.6.1.4.1.850.1.1.3.4.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing configurable threshold options for a particular ats.
| |||||||||||||||||||||
| CtlpAtsConfigOutputCurrentThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.4.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The output current measurement at which an over current condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigOverTemperatureThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.4.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The device temperature at which an over temperature condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigOverVoltageThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.4.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The input voltage measurement at which an over voltage condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigOverLoadThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.4.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The device load at which an overload condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpAtsConfigThdOutOfRangeThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.4.1.5 | Unsigned32 (1..9999) | RW | ||||||||||||||||||
column · Unsigned32 (1..9999) · read-write · current Denotes the percentage of THD voltage in hundredths of a percent at which the THD voltage out of range condition occurs. The out of range condition, tlpAtsAlarmThdOutOfRange, is triggered when the THD voltage exceeds this value.
| |||||||||||||||||||||
| TtlpAtsConfigVoltageRangeTable | 1.3.6.1.4.1.850.1.1.3.4.5.5 | NA | |||||||||||||||||||
table · not-accessible · current The voltage range options in this table is intended to configure the operating voltages of an ats. This is a sparse dependent table, and will contain some subset of devices that are atss. All voltage points defined in this table are listed in a specific order from high to low. All voltage points must satisfy the conditions and ranges defined for each point. Any point violating any of the relative limits will be rejected. For optimal operation, it is recommended that tlpAtsConfigHighVoltageReset be set lower than tlpAtsConfigHighVoltageTransfer by a margin no less than 1% of tlpAtsConfigHighVoltageTransfer; and that tlpAtsConfigSource1TransferReset (tlpAtsConfigSource2TransferReset) be set higher than tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet) by a margin no less than 1% of tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet). *The upper limit of line voltage is tlpAtsInputHighTransferVoltageUpperBound. The lower limit of line voltage is tlpAtsInputLowTransferVoltageLowerBound. All minimum and maximum limits for each voltage point are all exclusive unless indicated otherwise. | |||||||||||||||||||||
| RtlpAtsConfigVoltageRangeEntry | 1.3.6.1.4.1.850.1.1.3.4.5.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing voltage range configuration options for a particular ats. | |||||||||||||||||||||
| CtlpAtsConfigHighVoltageTransfer | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.1 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The maximum line voltage allowed on the input source before the unit disconnects the AC input connection. tlpAtsConfigHighVoltageTransfer is the same value for both input sources on some units. On such units, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsInputHighTransferVoltageUpperBound (inclusively). The minimum value allowed is dictated by tlpAtsConfigHighVoltageReset. This value may not be configurable on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigHighVoltageReset | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If an input connection is disconnected due to over-voltage, the line voltage on the input source has to fall below this value before the unit re-connects the AC input connection for the input source. tlpAtsConfigHighVoltageReset is the same value for both input sources on some units. On such units, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsConfigHighVoltageTransfer. On units where this is the same value for both sources, the minimum value allowed is dictated by the greater of tlpAtsConfigTransferReset.1 and tlpAtsConfigTransferReset.2. On units where the value is distinct for each source, the minimum value allowed is dictated solely by this source's tlpAtsConfigTransferReset. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigTransferReset | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If input source voltage level is above this value, a unit connected to this other input source will transition to this input source (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageReset. The minimum value allowed is dictated by tlpAtsConfigBrownoutSet. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigBrownoutSet | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This value dictates the voltage level below which the input source goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigTransferReset. The minimum value allowed is dictated by tlpAtsConfigTransferSet. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigTransferSet | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If input source voltage level falls below this value, a unit connected to this input source will transition to other input source (if it is in fair condition as denoted by tlpAtsConfigTransferSet). The maximum value allowed is dictated by tlpAtsConfigBrownoutSet. The minimum value allowed is dictated by tlpAtsConfigLowVoltageReset. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigLowVoltageReset | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above this value before the unit gets connected to the AC input connection. tlpAtsConfigLowVoltageReset is the same value for both input sources. As such, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by the lesser value of tlpAtsConfigTransferSet.1 and tlpAtsConfigTransferSet.2. The minimum value allowed is dictated by tlpAtsConfigLowVoltageTransfer. If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpAtsConfigLowVoltageTransfer | 1.3.6.1.4.1.850.1.1.3.4.5.5.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The minimum line voltage allowed before the unit disconnects the AC input connection. tlpAtsConfigLowVoltageTransfer is the same value for both input sources. As such, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsConfigLowVoltageReset. The minimum value allowed is dictated by tlpAtsInputLowTransferVoltageLowerBound (inclusively). If not supported, this value will return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpAtsConfigOutputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.4.5.6 | NA | |||||||||||||||||||
table · not-accessible · current The configuration options of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. Not all options are available on all atss. | |||||||||||||||||||||
| RtlpAtsConfigOutputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.4.5.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing threshold configuration options for a particular ats. | |||||||||||||||||||||
| CtlpAtsConfigOutputCurrentThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output current high/low threshold to evaluate output current high/low condition.
| |||||||||||||||||||||
| CtlpAtsConfigOutputCurrentHighThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which an output current high condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigOutputCurrentLowThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which an output current low condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigOutputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.4 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpAtsConfigOutputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigOutputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigOutputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigOutputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.6.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the output voltage low critical condition is declared.
| |||||||||||||||||||||
| TtlpAtsConfigInputPhaseThresholdTable | 1.3.6.1.4.1.850.1.1.3.4.5.7 | NA | |||||||||||||||||||
table · not-accessible · current The input phase configuration details for each ats in device table. This is a sparse dependent table, and will contain the number of entries based on the number of atss managed by the agent as reported by tlpAtsIdentNumAts and tlpAtsIdentNumPhases. Not all options are available on all atss. | |||||||||||||||||||||
| RtlpAtsConfigInputPhaseThresholdEntry | 1.3.6.1.4.1.850.1.1.3.4.5.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular input phase managed by this agent. | |||||||||||||||||||||
| CtlpAtsConfigInputVoltageThresholdTolerance | 1.3.6.1.4.1.850.1.1.3.4.5.7.1.1 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The threshold tolerance value used together with output voltage high/low threshold to evaluate output voltage high/low condition.
| |||||||||||||||||||||
| CtlpAtsConfigInputVoltageHighCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.7.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high critical condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigInputVoltageHighWarningThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.7.1.3 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage high warning condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigInputVoltageLowWarningThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.7.1.4 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low warning condition is declared.
| |||||||||||||||||||||
| CtlpAtsConfigInputVoltageLowCriticalThreshold | 1.3.6.1.4.1.850.1.1.3.4.5.7.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The value at which the input voltage low critical condition is declared.
| |||||||||||||||||||||
| NtlpCooling | 1.3.6.1.4.1.850.1.1.3.5 | ||||||||||||||||||||
| NtlpCoolingIdent | 1.3.6.1.4.1.850.1.1.3.5.1 | ||||||||||||||||||||
| StlpCoolingIdentNumCooling | 1.3.6.1.4.1.850.1.1.3.5.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of cooling devices that this agent is currently managing. | |||||||||||||||||||||
| NtlpCoolingDevice | 1.3.6.1.4.1.850.1.1.3.5.2 | ||||||||||||||||||||
| NtlpCoolingDetail | 1.3.6.1.4.1.850.1.1.3.5.3 | ||||||||||||||||||||
| NtlpCoolingTemperature | 1.3.6.1.4.1.850.1.1.3.5.3.1 | ||||||||||||||||||||
| TtlpCoolingTemperatureFahrenheitTable | 1.3.6.1.4.1.850.1.1.3.5.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The temperature details for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingTemperatureFahrenheitEntry | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing temperature details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingAmbientDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ambient temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME. Support was deprecated in agent versions 20 and later and superseded by tlpCoolingReturnAirDegF.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air supplied to the room in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air entering the cooling unit in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserInletDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air entering the condenser in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingEvaporatorDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the evaporator surface in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSuctionDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the low pressure refrigerant line in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingRemoteDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The external remote temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserOutletDegF | 1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air leaving the condenser in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingTemperatureCelsiusTable | 1.3.6.1.4.1.850.1.1.3.5.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The temperature details for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingTemperatureCelsiusEntry | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing temperature details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingAmbientDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.1 | Integer32 | RO | deprecated | |||||||||||||||||
column · Integer32 · read-only · deprecated The ambient temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME. Support was deprecated in agent versions 20 and later and superseded by tlpCoolingReturnAirDegC.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air supplied to the room in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air entering the cooling unit in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserInletDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air entering the condenser in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingEvaporatorDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the evaporator surface in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSuctionDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the low pressure refrigerant line in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingRemoteDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The external remote temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserOutletDegC | 1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The temperature of the air leaving the condenser in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpCoolingPressure | 1.3.6.1.4.1.850.1.1.3.5.3.2 | ||||||||||||||||||||
| TtlpCoolingPressureMpaTable | 1.3.6.1.4.1.850.1.1.3.5.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The pressure detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingPressureMpaEntry | 1.3.6.1.4.1.850.1.1.3.5.3.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing pressure details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingSuctionPressureMpa | 1.3.6.1.4.1.850.1.1.3.5.3.2.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The pressure of the compressor discharge line in tenths of Mpa. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingDischargePressureMpa | 1.3.6.1.4.1.850.1.1.3.5.3.2.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The pressure of the compressor discharge line in tenths of Mpa. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingPressurePsiTable | 1.3.6.1.4.1.850.1.1.3.5.3.2.2 | NA | |||||||||||||||||||
table · not-accessible · current The pressure detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingPressurePsiEntry | 1.3.6.1.4.1.850.1.1.3.5.3.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing pressure details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingSuctionPressurePsi | 1.3.6.1.4.1.850.1.1.3.5.3.2.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The pressure of the compressor discharge line in tenths of Psi. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingDischargePressurePsi | 1.3.6.1.4.1.850.1.1.3.5.3.2.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The pressure of the compressor discharge line in tenths of Psi. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingCurrentTable | 1.3.6.1.4.1.850.1.1.3.5.3.3 | NA | |||||||||||||||||||
table · not-accessible · current The input current for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingCurrentEntry | 1.3.6.1.4.1.850.1.1.3.5.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing input current for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingUnitCurrent | 1.3.6.1.4.1.850.1.1.3.5.3.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The total current draw of the unit in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCompressorCurrent | 1.3.6.1.4.1.850.1.1.3.5.3.3.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The compressor current draw of the unit in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingEvaporatorFanCurrent | 1.3.6.1.4.1.850.1.1.3.5.3.3.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The current draw of the evaporator fan in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserFanCurrent | 1.3.6.1.4.1.850.1.1.3.5.3.3.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The current draw of the condenser fan in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingDynamicTable | 1.3.6.1.4.1.850.1.1.3.5.3.4 | NA | |||||||||||||||||||
table · not-accessible · current The dynamic detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingDynamicEntry | 1.3.6.1.4.1.850.1.1.3.5.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry dynamic details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingEvaporatorFanSpeed | 1.3.6.1.4.1.850.1.1.3.5.3.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current speed of the evaporator fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserFanSpeed | 1.3.6.1.4.1.850.1.1.3.5.3.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current speed of the condenser fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCompressorFrequency | 1.3.6.1.4.1.850.1.1.3.5.3.4.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The operating mechanical frequency(Hz) of the compressor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingEEVSteps | 1.3.6.1.4.1.850.1.1.3.5.3.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current EEV steps. If not supported, this value will always return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| TtlpCoolingRuntimeTable | 1.3.6.1.4.1.850.1.1.3.5.3.5 | NA | |||||||||||||||||||
table · not-accessible · current The runtime detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingRuntimeEntry | 1.3.6.1.4.1.850.1.1.3.5.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing runtime for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingCompressorRunDays | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total days the compressor has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondensatePumpRunDays | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total days the condensate pump has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingAirFilterRunHours | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total hours the air filter has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingEvaporatorFanRunDays | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total days the evaporator fan has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCondenserFanRunDays | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total days the condenser fan has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingAtomizerRunDays | 1.3.6.1.4.1.850.1.1.3.5.3.5.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Total days the atomizer has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingStatusTable | 1.3.6.1.4.1.850.1.1.3.5.3.6 | NA | |||||||||||||||||||
table · not-accessible · current The status detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling. | |||||||||||||||||||||
| RtlpCoolingStatusEntry | 1.3.6.1.4.1.850.1.1.3.5.3.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing status for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingOperatingMode | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current operating mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCoolOutput | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The current cooling output of the cooling device in tenth of kilowatt. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingAlarmStatus | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current alarm status of the cooling device. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingCompressorStatus | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current operating status of compressor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingWaterStatus | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current water status of cooling unit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingDefrostMode | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the defrost mode is presently enabled or disabled. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingQuietMode | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the quiet mode is presently enabled or disabled. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingHotGasBypass | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the hot gas bypass mode is presently enabled or disabled. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingAutoFanSpeed | 1.3.6.1.4.1.850.1.1.3.5.3.6.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the auto fan speed is presently enabled or disabled. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpCoolingControl | 1.3.6.1.4.1.850.1.1.3.5.4 | ||||||||||||||||||||
| TtlpCoolingControlTable | 1.3.6.1.4.1.850.1.1.3.5.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The actionable controls for each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. | |||||||||||||||||||||
| RtlpCoolingControlEntry | 1.3.6.1.4.1.850.1.1.3.5.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing controls for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingMode | 1.3.6.1.4.1.850.1.1.3.5.4.1.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Turn the unit on or off.
| |||||||||||||||||||||
| CtlpCoolingControlOn | 1.3.6.1.4.1.850.1.1.3.5.4.1.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the cooling device on. | |||||||||||||||||||||
| CtlpCoolingControlOff | 1.3.6.1.4.1.850.1.1.3.5.4.1.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to turn the cooling device off. | |||||||||||||||||||||
| NtlpCoolingConfig | 1.3.6.1.4.1.850.1.1.3.5.5 | ||||||||||||||||||||
| TtlpCoolingConfigTable | 1.3.6.1.4.1.850.1.1.3.5.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The configuration details for each each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices. | |||||||||||||||||||||
| RtlpCoolingConfigEntry | 1.3.6.1.4.1.850.1.1.3.5.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry configuration details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingConfigAutoStart | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.1 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Specifies if the unit should start automatically on power up. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigFanSpeed | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the actual speed of the evaporator fan. Setting the fan speed to auto(6) will enable tlpCoolingAutoFanSpeed; however, on most units getting the fan speed will return the actual fan speed regardless whether auto fan speed is enabled or disabled. The value auto(6) is returned only on units that do not report the actual fan speed when auto fan speed is enabled. Not all values are supported on all cooling units. Invalid values will return an appropriate error when accessed. If not supported, this value will always return ERROR_NO_SUCH_NAME
| |||||||||||||||||||||
| CtlpCoolingConfigControlType | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.3 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete Specifies which temperature is used as a control point. This value is obsolete as of agent version 15. It is superseded by tlpCoolingConfigRemoteTemperatureSensor. This value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigDisplayUnits | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies whether displays output values in Metric or English formats. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigBeepOnKey | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.5 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete Specifies whether a beep is emitted when a key is pressed on the unit's display panel. This value is obsolete as of agent version 15 and will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigInputContactType | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.6 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The input contact type. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigOutputContactType | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.7 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The output contact type. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigOutputRelaySource | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.8 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The alarm level that causes the output relay to activate. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigOutputRelayDefault | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.9 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Type of contact to make when output relay is activated. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigOffOnInputContact | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.10 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates if the unit should stop cooling when input contact is activated. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigOffOnLeak | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.11 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Indicates if the unit should stop cooling when leak input is activated. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigWaterLeakContactType | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.12 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated The water leak contact type. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigAirFilterInterval | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.13 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The number of weeks before the air filter needs to be changed. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigAirFilterAlarm | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.14 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated When enabled, an alarm should occur when the maximum number of air filter run hours has been exceeded. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigMaxAirFilterRunHours | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.15 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The maximum interval for air filter run hours before warning is annunciated. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigStartTimer | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.16 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The unit will start operate after the specified timer elapsed. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigStopTimer | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.17 | Unsigned32 | RW | deprecated | |||||||||||||||||
column · Unsigned32 · read-write · deprecated The unit will switch to standby mode after the specified timer elapsed. This value is deprecated as of agent version 20. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigEnergyMode | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables or disables the energy saving mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigDefrostMode | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.19 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This option enables or disables the defrost mode. This value is deprecated as of agent version 20 and not remotely configurable on any device. It is superseded by tlpCoolingDefrostMode.
| |||||||||||||||||||||
| CtlpCoolingConfigRemoteTemperatureSensor | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables or disables the remote temperature sensor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigDehumidifyingMode | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables or disables the dehumidifying mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigFanAlwaysOn | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This option enables or disables the fan always on. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingConfigQuietMode | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.23 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete This option enables or disables the quiet mode. This value is deprecated as of agent version 20 and not remotely configurable on any device. It is superseded by tlpCoolingQuietMode.
| |||||||||||||||||||||
| CtlpCoolingConfigHotGasBypass | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.24 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This option enables or disables the hot gas bypass. This value is deprecated as of agent version 20 and not remotely configurable on any device. It is superseded by tlpCoolingHotGasBypass.
| |||||||||||||||||||||
| CtlpCoolingConfigAutoFanSpeed | 1.3.6.1.4.1.850.1.1.3.5.5.1.1.25 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated This option enables or disables the auto fan speed. This value is deprecated as of agent version 20 and superseded by tlpCoolingFanSpeed and tlpCoolingAutoFanSpeed.
| |||||||||||||||||||||
| TtlpCoolingConfigTemperatureFahrenheitTable | 1.3.6.1.4.1.850.1.1.3.5.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The configuration details for each each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices. | |||||||||||||||||||||
| RtlpCoolingConfigTemperatureFahrenheitEntry | 1.3.6.1.4.1.850.1.1.3.5.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry configuration details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingSetPointDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The set point temperature the unit will control the temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirHighLimitDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirLowLimitDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingMaxDeviationLimitDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed air temperature deviation from set temperature before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirHighLimitDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirLowLimitDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingRemoteSetPointDegF | 1.3.6.1.4.1.850.1.1.3.5.5.2.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The remote set point temperature the unit will control the temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| TtlpCoolingConfigTemperatureCelsiusTable | 1.3.6.1.4.1.850.1.1.3.5.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The configuration details for each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices. | |||||||||||||||||||||
| RtlpCoolingConfigTemperatureCelsiusEntry | 1.3.6.1.4.1.850.1.1.3.5.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry configuration details for a particular cooling device.
| |||||||||||||||||||||
| CtlpCoolingSetPointDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The set point temperature the unit will control the temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirHighLimitDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed supply air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingSupplyAirLowLimitDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum allowed supply air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingMaxDeviationLimitDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed air temperature deviation from set temperature before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirHighLimitDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum allowed return air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingReturnAirLowLimitDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum allowed return air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| CtlpCoolingRemoteSetPointDegC | 1.3.6.1.4.1.850.1.1.3.5.5.3.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The remote set point temperature the unit will control the temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
| |||||||||||||||||||||
| NtlpKvm | 1.3.6.1.4.1.850.1.1.3.6 | ||||||||||||||||||||
| NtlpKvmIdent | 1.3.6.1.4.1.850.1.1.3.6.1 | ||||||||||||||||||||
| StlpKvmIdentNumKvm | 1.3.6.1.4.1.850.1.1.3.6.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of kvm devices that this agent is currently managing. | |||||||||||||||||||||
| NtlpKvmDevice | 1.3.6.1.4.1.850.1.1.3.6.2 | ||||||||||||||||||||
| NtlpKvmDetail | 1.3.6.1.4.1.850.1.1.3.6.3 | ||||||||||||||||||||
| NtlpKvmControl | 1.3.6.1.4.1.850.1.1.3.6.4 | ||||||||||||||||||||
| NtlpKvmConfig | 1.3.6.1.4.1.850.1.1.3.6.5 | ||||||||||||||||||||
| NtlpRackTrack | 1.3.6.1.4.1.850.1.1.3.7 | ||||||||||||||||||||
| NtlpRackTrackIdent | 1.3.6.1.4.1.850.1.1.3.7.1 | ||||||||||||||||||||
| StlpRackTrackIdentNumRackTrack | 1.3.6.1.4.1.850.1.1.3.7.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of rack track devices that this agent is currently managing. | |||||||||||||||||||||
| NtlpRackTrackDevice | 1.3.6.1.4.1.850.1.1.3.7.2 | ||||||||||||||||||||
| NtlpRackTrackDetail | 1.3.6.1.4.1.850.1.1.3.7.3 | ||||||||||||||||||||
| NtlpRackTrackControl | 1.3.6.1.4.1.850.1.1.3.7.4 | ||||||||||||||||||||
| NtlpRackTrackConfig | 1.3.6.1.4.1.850.1.1.3.7.5 | ||||||||||||||||||||
| NtlpSwitch | 1.3.6.1.4.1.850.1.1.3.8 | ||||||||||||||||||||
| NtlpSwitchIdent | 1.3.6.1.4.1.850.1.1.3.8.1 | ||||||||||||||||||||
| StlpSwitchIdentNumSwitch | 1.3.6.1.4.1.850.1.1.3.8.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of switch devices that this agent is currently managing. | |||||||||||||||||||||
| NtlpSwitchDevice | 1.3.6.1.4.1.850.1.1.3.8.2 | ||||||||||||||||||||
| NtlpSwitchDetail | 1.3.6.1.4.1.850.1.1.3.8.3 | ||||||||||||||||||||
| NtlpSwitchControl | 1.3.6.1.4.1.850.1.1.3.8.4 | ||||||||||||||||||||
| NtlpSwitchConfig | 1.3.6.1.4.1.850.1.1.3.8.5 | ||||||||||||||||||||
| NtlpSoftware | 1.3.6.1.4.1.850.1.2 | ||||||||||||||||||||
| NtlpAgentDetails | 1.3.6.1.4.1.850.1.2.1 | ||||||||||||||||||||
| NtlpAgentIdent | 1.3.6.1.4.1.850.1.2.1.1 | ||||||||||||||||||||
| StlpAgentType | 1.3.6.1.4.1.850.1.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The type of PowerAlert engine providing this data.
| |||||||||||||||||||||
| StlpAgentVersion | 1.3.6.1.4.1.850.1.2.1.1.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version of the agent software. | |||||||||||||||||||||
| StlpAgentDriverVersion | 1.3.6.1.4.1.850.1.2.1.1.3 | DisplayString | RO | deprecated | |||||||||||||||||
scalar · DisplayString · read-only · deprecated The driver version of the agent software. This value is not supported in PowerAlert agents v20 and above and will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| StlpAgentMAC | 1.3.6.1.4.1.850.1.2.1.1.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The MAC Address of the agent. | |||||||||||||||||||||
| StlpAgentSerialNum | 1.3.6.1.4.1.850.1.2.1.1.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Serial number of the web card providing the agent data. This value is only supported by a web card agent. PowerAlert for PC (PAL) agents do not support this value and will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| StlpAgentUuid | 1.3.6.1.4.1.850.1.2.1.1.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Universally unique identifier for this host in the form 8-4-4-4-12 for a total of 36 characters (32 alphanumeric characters and four hyphens). For example: 550e8400-e29b-41d4-a716-446655440000. | |||||||||||||||||||||
| NtlpAgentAttributes | 1.3.6.1.4.1.850.1.2.1.2 | ||||||||||||||||||||
| NtlpAgentAttributesSupports | 1.3.6.1.4.1.850.1.2.1.2.1 | ||||||||||||||||||||
| StlpAgentAttributesSupportsHTTP | 1.3.6.1.4.1.850.1.2.1.2.1.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports HTTP connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsHTTPS | 1.3.6.1.4.1.850.1.2.1.2.1.2 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports HTTPS connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsFTP | 1.3.6.1.4.1.850.1.2.1.2.1.3 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports FTP connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsTelnet | 1.3.6.1.4.1.850.1.2.1.2.1.4 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports Telnet connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsObsolete1 | 1.3.6.1.4.1.850.1.2.1.2.1.5 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Unused. | |||||||||||||||||||||
| StlpAgentAttributesSupportsSSH | 1.3.6.1.4.1.850.1.2.1.2.1.6 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports SSH connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsObsolete2 | 1.3.6.1.4.1.850.1.2.1.2.1.7 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Unused. | |||||||||||||||||||||
| StlpAgentAttributesSupportsSNMP | 1.3.6.1.4.1.850.1.2.1.2.1.8 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports SNMP connections. | |||||||||||||||||||||
| StlpAgentAttributesSupportsSNMPTrap | 1.3.6.1.4.1.850.1.2.1.2.1.9 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent supports listening for SNMP traps. This is only applicable for network monitoring applications, PowerAlert Shutdown Agent for an example, that connect to a web card or PowerAlert Local and listen for outbound traps. As such, this value is not supported and will always return 2(false) for a web card or PowerAlert Local. | |||||||||||||||||||||
| NtlpAgentAttributesEnabled | 1.3.6.1.4.1.850.1.2.1.2.2 | ||||||||||||||||||||
| StlpAgentAttributesHTTPEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow HTTP connections. | |||||||||||||||||||||
| StlpAgentAttributesHTTPSEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.2 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow HTTPS connections. | |||||||||||||||||||||
| StlpAgentAttributesFTPEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.3 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Indicates whether the agent will allow FTP connections. | |||||||||||||||||||||
| StlpAgentAttributesTelnetEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.4 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow Telnet connections. | |||||||||||||||||||||
| StlpAgentAttributesObsolete1Enabled | 1.3.6.1.4.1.850.1.2.1.2.2.5 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Unused. | |||||||||||||||||||||
| StlpAgentAttributesSSHEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.6 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow SSH connections. | |||||||||||||||||||||
| StlpAgentAttributesSFTPEnabled | 1.3.6.1.4.1.850.1.2.1.2.2.7 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Indicates whether the agent will allow SFTP and SCP connections. | |||||||||||||||||||||
| StlpAgentAttributesObsolete2Enabled | 1.3.6.1.4.1.850.1.2.1.2.2.8 | TruthValue | RO | deprecated | |||||||||||||||||
scalar · TruthValue · read-only · deprecated Unknown. | |||||||||||||||||||||
| NtlpAgentAttributesSnmp | 1.3.6.1.4.1.850.1.2.1.2.3 | ||||||||||||||||||||
| StlpAgentAttributesSNMPv1Enabled | 1.3.6.1.4.1.850.1.2.1.2.3.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow SNMPv1 connections. | |||||||||||||||||||||
| StlpAgentAttributesSNMPv2cEnabled | 1.3.6.1.4.1.850.1.2.1.2.3.2 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow SNMPv2c connections. | |||||||||||||||||||||
| StlpAgentAttributesSNMPv3Enabled | 1.3.6.1.4.1.850.1.2.1.2.3.3 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether the agent will allow SNMPv3 connections. | |||||||||||||||||||||
| NtlpAgentAttributesPorts | 1.3.6.1.4.1.850.1.2.1.2.4 | ||||||||||||||||||||
| StlpAgentAttributesHTTPPort | 1.3.6.1.4.1.850.1.2.1.2.4.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for HTTP communications. | |||||||||||||||||||||
| StlpAgentAttributesHTTPSPort | 1.3.6.1.4.1.850.1.2.1.2.4.2 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for HTTPS communications. | |||||||||||||||||||||
| StlpAgentAttributesFTPPort | 1.3.6.1.4.1.850.1.2.1.2.4.3 | Unsigned32 | RO | deprecated | |||||||||||||||||
scalar · Unsigned32 · read-only · deprecated The port used for FTP communications. | |||||||||||||||||||||
| StlpAgentAttributesTelnetPort | 1.3.6.1.4.1.850.1.2.1.2.4.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for Telnet communications. | |||||||||||||||||||||
| StlpAgentAttributesObsolete1Port | 1.3.6.1.4.1.850.1.2.1.2.4.5 | Unsigned32 | RO | deprecated | |||||||||||||||||
scalar · Unsigned32 · read-only · deprecated Unused. | |||||||||||||||||||||
| StlpAgentAttributesSSHPort | 1.3.6.1.4.1.850.1.2.1.2.4.6 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for SSH communications. | |||||||||||||||||||||
| StlpAgentAttributesObsolete2Port | 1.3.6.1.4.1.850.1.2.1.2.4.7 | Unsigned32 | RO | deprecated | |||||||||||||||||
scalar · Unsigned32 · read-only · deprecated Unused. | |||||||||||||||||||||
| StlpAgentAttributesSNMPPort | 1.3.6.1.4.1.850.1.2.1.2.4.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for SNMP communications. | |||||||||||||||||||||
| StlpAgentAttributesSNMPTrapPort | 1.3.6.1.4.1.850.1.2.1.2.4.9 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The port used for SNMP trap and notifications. | |||||||||||||||||||||
| NtlpAgentAttributesOptions | 1.3.6.1.4.1.850.1.2.1.2.5 | ||||||||||||||||||||
| StlpAgentAttributesHTTPRedirected | 1.3.6.1.4.1.850.1.2.1.2.5.1 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Indicates whether HTTP traffic is redirected to HTTPS. | |||||||||||||||||||||
| NtlpAgentAddresses | 1.3.6.1.4.1.850.1.2.1.3 | ||||||||||||||||||||
| StlpAgentAddressIPv4 | 1.3.6.1.4.1.850.1.2.1.3.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The IPv4 address of the agent. | |||||||||||||||||||||
| StlpAgentAddressIPv6 | 1.3.6.1.4.1.850.1.2.1.3.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The IPv6 address of the agent. | |||||||||||||||||||||
| NtlpAgentSettings | 1.3.6.1.4.1.850.1.2.2 | ||||||||||||||||||||
| NtlpAgentConfig | 1.3.6.1.4.1.850.1.2.2.1 | ||||||||||||||||||||
| StlpAgentConfigRemoteRegistration | 1.3.6.1.4.1.850.1.2.2.1.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Registers an SNMP contact's IP address and the port on which the contact is listening for SNMP traps. Setting this value is used to CREATE a table entry in a non-standard way. Getting this value will return a string INADDR_ANY and any port number. The port number should always be included. When unregistering an SNMP contact, the requester's IP address should be provided with a port number of 0. When setting or unsetting this OID, the IP address string should never be 0 nor should it be empty. The registration uses its default community string to register each contact. To use a community other than the default, then it must be appended to the end of the string delimited with a comma. The address should be of the format 0.0.0.0:00000 for IPv4. If IPv6 is supported, use the bracket-enclosed format given in IETF RFC 2732 Section 2, with the following examples: [FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80 [1080:0:0:0:8:800:200C:417A]:162 [3ffe:2a00:100:7031::1]:162 [1080::8:800:200C:417A]:162,myCommunity [::192.9.5.5]:162,myCommunity [::FFFF:129.144.52.38]:80 [2010:836B:4179::836B:4179]:162 | |||||||||||||||||||||
| StlpAgentConfigCurrentTime | 1.3.6.1.4.1.850.1.2.2.1.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current PowerAlert's current date and time in UTC. Setting this value must follow the RFC3339 time format (e.g. '2030-07-04 00:00:00+05:00'). Regardless of any time offset used when setting this value, the agent will always return a value with an offset of +00:00. | |||||||||||||||||||||
| NtlpAgentContacts | 1.3.6.1.4.1.850.1.2.3 | ||||||||||||||||||||
| NtlpAgentEmailContacts | 1.3.6.1.4.1.850.1.2.3.1 | ||||||||||||||||||||
| StlpAgentNumEmailContacts | 1.3.6.1.4.1.850.1.2.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of email contacts currently defined in the agent. | |||||||||||||||||||||
| TtlpAgentEmailContactTable | 1.3.6.1.4.1.850.1.2.3.1.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of email contact entries. The number of entries is given by the value of tlpAgentNumEmailContacts. | |||||||||||||||||||||
| RtlpAgentEmailContactEntry | 1.3.6.1.4.1.850.1.2.3.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the details of an email contact. | |||||||||||||||||||||
| CtlpAgentEmailContactIndex | 1.3.6.1.4.1.850.1.2.3.1.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the email contact. | |||||||||||||||||||||
| CtlpAgentEmailContactRowStatus | 1.3.6.1.4.1.850.1.2.3.1.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpAgentEmailContactTable. | |||||||||||||||||||||
| CtlpAgentEmailContactName | 1.3.6.1.4.1.850.1.2.3.1.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of the email contact. | |||||||||||||||||||||
| CtlpAgentEmailContactAddress | 1.3.6.1.4.1.850.1.2.3.1.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The address of the email contact. | |||||||||||||||||||||
| CtlpAgentEmailContactTest | 1.3.6.1.4.1.850.1.2.3.1.2.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to send a test email to the contact. | |||||||||||||||||||||
| NtlpAgentSnmpContacts | 1.3.6.1.4.1.850.1.2.3.2 | ||||||||||||||||||||
| StlpAgentNumSnmpContacts | 1.3.6.1.4.1.850.1.2.3.2.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of SNMP contacts currently defined in the agent. | |||||||||||||||||||||
| TtlpAgentSnmpContactTable | 1.3.6.1.4.1.850.1.2.3.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of SNMP contact entries. The number of entries is given by the value of tlpAgentNumSnmpContacts. | |||||||||||||||||||||
| RtlpAgentSnmpContactEntry | 1.3.6.1.4.1.850.1.2.3.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the details of an SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactIndex | 1.3.6.1.4.1.850.1.2.3.2.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactRowStatus | 1.3.6.1.4.1.850.1.2.3.2.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpAgentSnmpContactTable. | |||||||||||||||||||||
| CtlpAgentSnmpContactName | 1.3.6.1.4.1.850.1.2.3.2.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactIpAddress | 1.3.6.1.4.1.850.1.2.3.2.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The IP address of the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactTrapPort | 1.3.6.1.4.1.850.1.2.3.2.2.1.5 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The trap port used for the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactSnmpVersion | 1.3.6.1.4.1.850.1.2.3.2.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The SNMP contact version to use for sending traps.
| |||||||||||||||||||||
| CtlpAgentSnmpContactSecurityName | 1.3.6.1.4.1.850.1.2.3.2.2.1.7 | DisplayString | RW | deprecated | |||||||||||||||||
column · DisplayString · read-write · deprecated The security name for the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactPrivPassword | 1.3.6.1.4.1.850.1.2.3.2.2.1.8 | DisplayString | RW | obsolete | |||||||||||||||||
column · DisplayString · read-write · obsolete The privacy password to use for sending V3 traps to the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactAuthPassword | 1.3.6.1.4.1.850.1.2.3.2.2.1.9 | DisplayString | RW | obsolete | |||||||||||||||||
column · DisplayString · read-write · obsolete The authentication password to use for sending V3 traps to the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactTrapType | 1.3.6.1.4.1.850.1.2.3.2.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The type of notification to use for the SNMP contact. SNMPv1 does not support inform(1).
| |||||||||||||||||||||
| CtlpAgentSnmpContactSetPort | 1.3.6.1.4.1.850.1.2.3.2.2.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The set port used by the SNMP contact. | |||||||||||||||||||||
| CtlpAgentSnmpContactSupportsTrap | 1.3.6.1.4.1.850.1.2.3.2.2.1.12 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Indicates whether the SNMP contact supports notifications. | |||||||||||||||||||||
| CtlpAgentSnmpContactSupportsSet | 1.3.6.1.4.1.850.1.2.3.2.2.1.13 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Indicates whether the SNMP contact supports sets. | |||||||||||||||||||||
| CtlpAgentSnmpContactTestTrap | 1.3.6.1.4.1.850.1.2.3.2.2.1.14 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to send a test trap to the contact. | |||||||||||||||||||||
| NtlpAgentSmsContacts | 1.3.6.1.4.1.850.1.2.3.3 | ||||||||||||||||||||
| StlpAgentSmsNumSmsContacts | 1.3.6.1.4.1.850.1.2.3.3.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of SMS contacts currently defined in the agent. | |||||||||||||||||||||
| TtlpAgentSmsContactTable | 1.3.6.1.4.1.850.1.2.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of SMS contact entries. The number of entries is given by the value of tlpAgentSmsContacts. | |||||||||||||||||||||
| RtlpAgentSmsContactEntry | 1.3.6.1.4.1.850.1.2.3.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the details of an SMS contact. | |||||||||||||||||||||
| CtlpAgentSmsContactIndex | 1.3.6.1.4.1.850.1.2.3.3.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the SMS contact. | |||||||||||||||||||||
| CtlpAgentSmsContactRowStatus | 1.3.6.1.4.1.850.1.2.3.3.2.1.2 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Row status for the tlpAgentSmsContactTable. | |||||||||||||||||||||
| CtlpAgentSmsContactName | 1.3.6.1.4.1.850.1.2.3.3.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of the SMS contact. | |||||||||||||||||||||
| CtlpAgentSmsContactNumber | 1.3.6.1.4.1.850.1.2.3.3.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The Phone number of the SMS contact. | |||||||||||||||||||||
| CtlpAgentSmsContactTest | 1.3.6.1.4.1.850.1.2.3.3.2.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current Set to TRUE to send a test text message to the contact. | |||||||||||||||||||||
| NtlpAgentAutoProbe | 1.3.6.1.4.1.850.1.2.4 | ||||||||||||||||||||
| StlpAgentAutoProbeNumProbes | 1.3.6.1.4.1.850.1.2.4.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The number of probes currently defined in the agent. | |||||||||||||||||||||
| TtlpAgentAutoProbeTable | 1.3.6.1.4.1.850.1.2.4.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of probe entries. The number of entries is given by the value of tlpAgentAutoProbeNumProbes. | |||||||||||||||||||||
| RtlpAgentAutoProbeEntry | 1.3.6.1.4.1.850.1.2.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the details of a probe. | |||||||||||||||||||||
| CtlpAgentAutoProbeIndex | 1.3.6.1.4.1.850.1.2.4.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for the probe. | |||||||||||||||||||||
| CtlpAgentAutoProbeRowStatus | 1.3.6.1.4.1.850.1.2.4.2.1.2 | RowStatus | RO | ||||||||||||||||||
column · RowStatus · read-only · current Row status for the tlpAgentAutoProbeTable. | |||||||||||||||||||||
| CtlpAgentAutoProbeName | 1.3.6.1.4.1.850.1.2.4.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the probe. | |||||||||||||||||||||
| CtlpAgentAutoProbeDescription | 1.3.6.1.4.1.850.1.2.4.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The description of the probe. | |||||||||||||||||||||
| CtlpAgentAutoProbeType | 1.3.6.1.4.1.850.1.2.4.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of probe.
| |||||||||||||||||||||
| CtlpAgentAutoProbeStatus | 1.3.6.1.4.1.850.1.2.4.2.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current status of the probe.
| |||||||||||||||||||||
| CtlpAgentAutoProbeInterval | 1.3.6.1.4.1.850.1.2.4.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of minutes to wait between each probe attempt. | |||||||||||||||||||||
| CtlpAgentAutoProbeRetryCount | 1.3.6.1.4.1.850.1.2.4.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The number of failed probe attempts before a failure alert is triggered. | |||||||||||||||||||||
| CtlpAgentAutoProbePrimaryAddress | 1.3.6.1.4.1.850.1.2.4.2.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The primary ip address or host name to probe. | |||||||||||||||||||||
| CtlpAgentAutoProbePrimaryPort | 1.3.6.1.4.1.850.1.2.4.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The primary port on tlpAgentAutoProbePrimaryAddress to probe. Not all probe types (tlpAgentAutoProbeType) support ports. If not supported, this agent will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| CtlpAgentAutoProbeSecondaryAddress | 1.3.6.1.4.1.850.1.2.4.2.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The optional secondary ip address or host name to probe. | |||||||||||||||||||||
| CtlpAgentAutoProbeSecondaryPort | 1.3.6.1.4.1.850.1.2.4.2.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The secondary port on tlpAgentAutoProbeSecondaryAddress to probe. Not all probe types (tlpAgentAutoProbeType) support ports. If not supported, this agent will return ERROR_NO_SUCH_NAME. | |||||||||||||||||||||
| NtlpAlarms | 1.3.6.1.4.1.850.1.3 | ||||||||||||||||||||
| StlpAlarmsPresent | 1.3.6.1.4.1.850.1.3.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The present number of active alarm conditions. | |||||||||||||||||||||
| TtlpAlarmTable | 1.3.6.1.4.1.850.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of alarm conditions for all devices managed by this agent. This table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect or conditions not acknowledged. The agent creates a row in the table each time a condition is detected and deletes that row when that condition no longer pertains (becomes inactive and is acknowledged). The agent creates the first row with tlpAlarmId equal to 1, and increments the value of tlpAlarmId each time a new row is created, wrapping to the first free value greater than or equal to 1 when the maximum value of tlpAlarmId would otherwise be exceeded. Consequently, after multiple operations, the table may become sparse (e.g., containing entries for rows 95, 100, 101, and 203) and the entries should not be assumed to be in chronological order because tlpAlarmId might have wrapped. The number of rows in the table at any given time is reflected by the value of tlpAlarmsPresent. | |||||||||||||||||||||
| RtlpAlarmEntry | 1.3.6.1.4.1.850.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information application to a particular alarm.
| |||||||||||||||||||||
| CtlpAlarmId | 1.3.6.1.4.1.850.1.3.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current A unique identifier for an alarm condition. This value will remain constant for the duration of the alarm condition. | |||||||||||||||||||||
| CtlpAlarmDescr | 1.3.6.1.4.1.850.1.3.2.1.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference of the alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description for the alarm condition. The object referenced will be a well known alarm object associated with the device on which the alarm condition is active. | |||||||||||||||||||||
| CtlpAlarmTime | 1.3.6.1.4.1.850.1.3.2.1.3 | TimeStamp | RO | ||||||||||||||||||
column · TimeStamp · read-only · current The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of tlpAlarmsTime shall equal 0. | |||||||||||||||||||||
| CtlpAlarmTableRef | 1.3.6.1.4.1.850.1.3.2.1.4 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current This value references the OID of a table object applicable to the alarm condition. This, in conjunction with the table row as defined by tlpAlarmTableRowRef, specifies the object/row within this table to which the alarm condition applies. Example 1 -- The following sample values will be returned for a ups on battery: tlpAlarmId 28 tlpAlarmDescr tlpUpsAlarmOnBattery tlpAlarmTime 12345678 tlpAlarmTableRef tlpDeviceTable tlpAlarmTableRowRef tlpDeviceIndex.2 tlpAlarmDetail On Battery tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged notAcknowledged tlpAlarmSeverity warning In the above example, tlpAlarmTableRef references the device table and tlpAlarmTableRowRef references the 2nd managed device in that table. Example 2 -- The following sample values will be returned for a pdu with a load turned off: tlpAlarmId 46 tlpAlarmDescr tlpPduAlarmLoadOff tlpAlarmTime 12345678 tlpAlarmTableRef tlpPduOutletTable tlpAlarmTableRowRef tlpOutletIndex.1.4 tlpAlarmDetail Load Off tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged acknowledged tlpAlarmSeverity warning In the above example, tlpAlarmTableRef references the pdu outlet table and tlpAlarmTableRowRef references the 4th outlet on the 1st managed device. | |||||||||||||||||||||
| CtlpAlarmTableRowRef | 1.3.6.1.4.1.850.1.3.2.1.5 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current This value is used in conjunction with tlpAlarmTableRef to define the object associated with this alarm condition. See the description of tlpAlarmTableRef for more information. | |||||||||||||||||||||
| CtlpAlarmDetail | 1.3.6.1.4.1.850.1.3.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A textual description of the alarm condition. | |||||||||||||||||||||
| CtlpAlarmType | 1.3.6.1.4.1.850.1.3.2.1.7 | INTEGER | RO | deprecated | |||||||||||||||||
column · INTEGER · read-only · deprecated The category/group of this alarm.
| |||||||||||||||||||||
| CtlpAlarmState | 1.3.6.1.4.1.850.1.3.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current state of this alarm condition. An active(1) alarm is a condition that currently exists. An inactive(2) alarm is a condition that no longer exists because the alarm either cleared or was resolved. Each alarm condition must be cleared and acknowledged before it is removed from this table (see tlpAlarmAcknowledged).
| |||||||||||||||||||||
| CtlpAlarmAcknowledged | 1.3.6.1.4.1.850.1.3.2.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Denotes whether the alarm condition has been acknowledged. The agent will return notAcknowledged(1) if the condition has not been acknowledged, or acknowledged(2) when acknowledged. Writing the value acknowledged(2) for an alarm acknowledges the alarm condition. Each alarm condition must be cleared and acknowledged before it is removed from this table; therefore, even if acknowledged, the alarm will remain in this table until the alarm becomes inactive as denoted by tlpAlarmState.
| |||||||||||||||||||||
| CtlpAlarmSeverity | 1.3.6.1.4.1.850.1.3.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The severity of this alarm.
| |||||||||||||||||||||
| NtlpAlarmsWellKnown | 1.3.6.1.4.1.850.1.3.3 | ||||||||||||||||||||
| NtlpAgentAlarms | 1.3.6.1.4.1.850.1.3.3.1 | ||||||||||||||||||||
| NtlpAutoProbeAlarms | 1.3.6.1.4.1.850.1.3.3.1.1 | ||||||||||||||||||||
| NtlpAutoProbeAlarm01 | 1.3.6.1.4.1.850.1.3.3.1.1.1 | ||||||||||||||||||||
node · current AutoProbe 1 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm02 | 1.3.6.1.4.1.850.1.3.3.1.1.2 | ||||||||||||||||||||
node · current AutoProbe 2 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm03 | 1.3.6.1.4.1.850.1.3.3.1.1.3 | ||||||||||||||||||||
node · current AutoProbe 3 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm04 | 1.3.6.1.4.1.850.1.3.3.1.1.4 | ||||||||||||||||||||
node · current AutoProbe 4 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm05 | 1.3.6.1.4.1.850.1.3.3.1.1.5 | ||||||||||||||||||||
node · current AutoProbe 5 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm06 | 1.3.6.1.4.1.850.1.3.3.1.1.6 | ||||||||||||||||||||
node · current AutoProbe 6 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm07 | 1.3.6.1.4.1.850.1.3.3.1.1.7 | ||||||||||||||||||||
node · current AutoProbe 7 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm08 | 1.3.6.1.4.1.850.1.3.3.1.1.8 | ||||||||||||||||||||
node · current AutoProbe 8 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm09 | 1.3.6.1.4.1.850.1.3.3.1.1.9 | ||||||||||||||||||||
node · current AutoProbe 9 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm10 | 1.3.6.1.4.1.850.1.3.3.1.1.10 | ||||||||||||||||||||
node · current AutoProbe 10 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm11 | 1.3.6.1.4.1.850.1.3.3.1.1.11 | ||||||||||||||||||||
node · current AutoProbe 11 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm12 | 1.3.6.1.4.1.850.1.3.3.1.1.12 | ||||||||||||||||||||
node · current AutoProbe 12 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm13 | 1.3.6.1.4.1.850.1.3.3.1.1.13 | ||||||||||||||||||||
node · current AutoProbe 13 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm14 | 1.3.6.1.4.1.850.1.3.3.1.1.14 | ||||||||||||||||||||
node · current AutoProbe 14 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm15 | 1.3.6.1.4.1.850.1.3.3.1.1.15 | ||||||||||||||||||||
node · current AutoProbe 15 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm16 | 1.3.6.1.4.1.850.1.3.3.1.1.16 | ||||||||||||||||||||
node · current AutoProbe 16 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm17 | 1.3.6.1.4.1.850.1.3.3.1.1.17 | ||||||||||||||||||||
node · current AutoProbe 17 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm18 | 1.3.6.1.4.1.850.1.3.3.1.1.18 | ||||||||||||||||||||
node · current AutoProbe 18 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm19 | 1.3.6.1.4.1.850.1.3.3.1.1.19 | ||||||||||||||||||||
node · current AutoProbe 19 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm20 | 1.3.6.1.4.1.850.1.3.3.1.1.20 | ||||||||||||||||||||
node · current AutoProbe 20 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm21 | 1.3.6.1.4.1.850.1.3.3.1.1.21 | ||||||||||||||||||||
node · current AutoProbe 21 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm22 | 1.3.6.1.4.1.850.1.3.3.1.1.22 | ||||||||||||||||||||
node · current AutoProbe 22 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm23 | 1.3.6.1.4.1.850.1.3.3.1.1.23 | ||||||||||||||||||||
node · current AutoProbe 23 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm24 | 1.3.6.1.4.1.850.1.3.3.1.1.24 | ||||||||||||||||||||
node · current AutoProbe 24 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm25 | 1.3.6.1.4.1.850.1.3.3.1.1.25 | ||||||||||||||||||||
node · current AutoProbe 25 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm26 | 1.3.6.1.4.1.850.1.3.3.1.1.26 | ||||||||||||||||||||
node · current AutoProbe 26 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm27 | 1.3.6.1.4.1.850.1.3.3.1.1.27 | ||||||||||||||||||||
node · current AutoProbe 27 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm28 | 1.3.6.1.4.1.850.1.3.3.1.1.28 | ||||||||||||||||||||
node · current AutoProbe 28 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm29 | 1.3.6.1.4.1.850.1.3.3.1.1.29 | ||||||||||||||||||||
node · current AutoProbe 29 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm30 | 1.3.6.1.4.1.850.1.3.3.1.1.30 | ||||||||||||||||||||
node · current AutoProbe 30 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm31 | 1.3.6.1.4.1.850.1.3.3.1.1.31 | ||||||||||||||||||||
node · current AutoProbe 31 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm32 | 1.3.6.1.4.1.850.1.3.3.1.1.32 | ||||||||||||||||||||
node · current AutoProbe 32 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm33 | 1.3.6.1.4.1.850.1.3.3.1.1.33 | ||||||||||||||||||||
node · current AutoProbe 33 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm34 | 1.3.6.1.4.1.850.1.3.3.1.1.34 | ||||||||||||||||||||
node · current AutoProbe 34 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm35 | 1.3.6.1.4.1.850.1.3.3.1.1.35 | ||||||||||||||||||||
node · current AutoProbe 35 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm36 | 1.3.6.1.4.1.850.1.3.3.1.1.36 | ||||||||||||||||||||
node · current AutoProbe 36 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm37 | 1.3.6.1.4.1.850.1.3.3.1.1.37 | ||||||||||||||||||||
node · current AutoProbe 37 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm38 | 1.3.6.1.4.1.850.1.3.3.1.1.38 | ||||||||||||||||||||
node · current AutoProbe 38 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm39 | 1.3.6.1.4.1.850.1.3.3.1.1.39 | ||||||||||||||||||||
node · current AutoProbe 39 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm40 | 1.3.6.1.4.1.850.1.3.3.1.1.40 | ||||||||||||||||||||
node · current AutoProbe 40 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm41 | 1.3.6.1.4.1.850.1.3.3.1.1.41 | ||||||||||||||||||||
node · current AutoProbe 41 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm42 | 1.3.6.1.4.1.850.1.3.3.1.1.42 | ||||||||||||||||||||
node · current AutoProbe 42 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm43 | 1.3.6.1.4.1.850.1.3.3.1.1.43 | ||||||||||||||||||||
node · current AutoProbe 43 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm44 | 1.3.6.1.4.1.850.1.3.3.1.1.44 | ||||||||||||||||||||
node · current AutoProbe 44 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm45 | 1.3.6.1.4.1.850.1.3.3.1.1.45 | ||||||||||||||||||||
node · current AutoProbe 45 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm46 | 1.3.6.1.4.1.850.1.3.3.1.1.46 | ||||||||||||||||||||
node · current AutoProbe 46 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm47 | 1.3.6.1.4.1.850.1.3.3.1.1.47 | ||||||||||||||||||||
node · current AutoProbe 47 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm48 | 1.3.6.1.4.1.850.1.3.3.1.1.48 | ||||||||||||||||||||
node · current AutoProbe 48 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm49 | 1.3.6.1.4.1.850.1.3.3.1.1.49 | ||||||||||||||||||||
node · current AutoProbe 49 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm50 | 1.3.6.1.4.1.850.1.3.3.1.1.50 | ||||||||||||||||||||
node · current AutoProbe 50 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm51 | 1.3.6.1.4.1.850.1.3.3.1.1.51 | ||||||||||||||||||||
node · current AutoProbe 51 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm52 | 1.3.6.1.4.1.850.1.3.3.1.1.52 | ||||||||||||||||||||
node · current AutoProbe 52 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm53 | 1.3.6.1.4.1.850.1.3.3.1.1.53 | ||||||||||||||||||||
node · current AutoProbe 53 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm54 | 1.3.6.1.4.1.850.1.3.3.1.1.54 | ||||||||||||||||||||
node · current AutoProbe 54 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm55 | 1.3.6.1.4.1.850.1.3.3.1.1.55 | ||||||||||||||||||||
node · current AutoProbe 55 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm56 | 1.3.6.1.4.1.850.1.3.3.1.1.56 | ||||||||||||||||||||
node · current AutoProbe 56 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm57 | 1.3.6.1.4.1.850.1.3.3.1.1.57 | ||||||||||||||||||||
node · current AutoProbe 57 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm58 | 1.3.6.1.4.1.850.1.3.3.1.1.58 | ||||||||||||||||||||
node · current AutoProbe 58 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm59 | 1.3.6.1.4.1.850.1.3.3.1.1.59 | ||||||||||||||||||||
node · current AutoProbe 59 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm60 | 1.3.6.1.4.1.850.1.3.3.1.1.60 | ||||||||||||||||||||
node · current AutoProbe 60 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm61 | 1.3.6.1.4.1.850.1.3.3.1.1.61 | ||||||||||||||||||||
node · current AutoProbe 61 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm62 | 1.3.6.1.4.1.850.1.3.3.1.1.62 | ||||||||||||||||||||
node · current AutoProbe 62 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm63 | 1.3.6.1.4.1.850.1.3.3.1.1.63 | ||||||||||||||||||||
node · current AutoProbe 63 failed. | |||||||||||||||||||||
| NtlpAutoProbeAlarm64 | 1.3.6.1.4.1.850.1.3.3.1.1.64 | ||||||||||||||||||||
node · current AutoProbe 64 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarms | 1.3.6.1.4.1.850.1.3.3.1.2 | ||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm01 | 1.3.6.1.4.1.850.1.3.3.1.2.1 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 1 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm02 | 1.3.6.1.4.1.850.1.3.3.1.2.2 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 2 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm03 | 1.3.6.1.4.1.850.1.3.3.1.2.3 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 3 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm04 | 1.3.6.1.4.1.850.1.3.3.1.2.4 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 4 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm05 | 1.3.6.1.4.1.850.1.3.3.1.2.5 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 5 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm06 | 1.3.6.1.4.1.850.1.3.3.1.2.6 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 6 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm07 | 1.3.6.1.4.1.850.1.3.3.1.2.7 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 7 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm08 | 1.3.6.1.4.1.850.1.3.3.1.2.8 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 8 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm09 | 1.3.6.1.4.1.850.1.3.3.1.2.9 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 9 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm10 | 1.3.6.1.4.1.850.1.3.3.1.2.10 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 10 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm11 | 1.3.6.1.4.1.850.1.3.3.1.2.11 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 11 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm12 | 1.3.6.1.4.1.850.1.3.3.1.2.12 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 12 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm13 | 1.3.6.1.4.1.850.1.3.3.1.2.13 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 13 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm14 | 1.3.6.1.4.1.850.1.3.3.1.2.14 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 14 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm15 | 1.3.6.1.4.1.850.1.3.3.1.2.15 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 15 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm16 | 1.3.6.1.4.1.850.1.3.3.1.2.16 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 16 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm17 | 1.3.6.1.4.1.850.1.3.3.1.2.17 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 17 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm18 | 1.3.6.1.4.1.850.1.3.3.1.2.18 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 18 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm19 | 1.3.6.1.4.1.850.1.3.3.1.2.19 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 19 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm20 | 1.3.6.1.4.1.850.1.3.3.1.2.20 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 20 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm21 | 1.3.6.1.4.1.850.1.3.3.1.2.21 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 21 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm22 | 1.3.6.1.4.1.850.1.3.3.1.2.22 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 22 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm23 | 1.3.6.1.4.1.850.1.3.3.1.2.23 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 23 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm24 | 1.3.6.1.4.1.850.1.3.3.1.2.24 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 24 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm25 | 1.3.6.1.4.1.850.1.3.3.1.2.25 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 25 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm26 | 1.3.6.1.4.1.850.1.3.3.1.2.26 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 26 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm27 | 1.3.6.1.4.1.850.1.3.3.1.2.27 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 27 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm28 | 1.3.6.1.4.1.850.1.3.3.1.2.28 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 28 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm29 | 1.3.6.1.4.1.850.1.3.3.1.2.29 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 29 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm30 | 1.3.6.1.4.1.850.1.3.3.1.2.30 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 30 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm31 | 1.3.6.1.4.1.850.1.3.3.1.2.31 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 31 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm32 | 1.3.6.1.4.1.850.1.3.3.1.2.32 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 32 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm33 | 1.3.6.1.4.1.850.1.3.3.1.2.33 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 33 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm34 | 1.3.6.1.4.1.850.1.3.3.1.2.34 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 34 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm35 | 1.3.6.1.4.1.850.1.3.3.1.2.35 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 35 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm36 | 1.3.6.1.4.1.850.1.3.3.1.2.36 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 36 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm37 | 1.3.6.1.4.1.850.1.3.3.1.2.37 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 37 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm38 | 1.3.6.1.4.1.850.1.3.3.1.2.38 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 38 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm39 | 1.3.6.1.4.1.850.1.3.3.1.2.39 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 39 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm40 | 1.3.6.1.4.1.850.1.3.3.1.2.40 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 40 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm41 | 1.3.6.1.4.1.850.1.3.3.1.2.41 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 41 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm42 | 1.3.6.1.4.1.850.1.3.3.1.2.42 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 42 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm43 | 1.3.6.1.4.1.850.1.3.3.1.2.43 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 43 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm44 | 1.3.6.1.4.1.850.1.3.3.1.2.44 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 44 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm45 | 1.3.6.1.4.1.850.1.3.3.1.2.45 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 45 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm46 | 1.3.6.1.4.1.850.1.3.3.1.2.46 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 46 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm47 | 1.3.6.1.4.1.850.1.3.3.1.2.47 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 47 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm48 | 1.3.6.1.4.1.850.1.3.3.1.2.48 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 48 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm49 | 1.3.6.1.4.1.850.1.3.3.1.2.49 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 49 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm50 | 1.3.6.1.4.1.850.1.3.3.1.2.50 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 50 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm51 | 1.3.6.1.4.1.850.1.3.3.1.2.51 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 51 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm52 | 1.3.6.1.4.1.850.1.3.3.1.2.52 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 52 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm53 | 1.3.6.1.4.1.850.1.3.3.1.2.53 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 53 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm54 | 1.3.6.1.4.1.850.1.3.3.1.2.54 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 54 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm55 | 1.3.6.1.4.1.850.1.3.3.1.2.55 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 55 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm56 | 1.3.6.1.4.1.850.1.3.3.1.2.56 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 56 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm57 | 1.3.6.1.4.1.850.1.3.3.1.2.57 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 57 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm58 | 1.3.6.1.4.1.850.1.3.3.1.2.58 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 58 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm59 | 1.3.6.1.4.1.850.1.3.3.1.2.59 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 59 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm60 | 1.3.6.1.4.1.850.1.3.3.1.2.60 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 60 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm61 | 1.3.6.1.4.1.850.1.3.3.1.2.61 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 61 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm62 | 1.3.6.1.4.1.850.1.3.3.1.2.62 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 62 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm63 | 1.3.6.1.4.1.850.1.3.3.1.2.63 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 63 failed. | |||||||||||||||||||||
| NtlpAutoProbeUserDefinedAlarm64 | 1.3.6.1.4.1.850.1.3.3.1.2.64 | ||||||||||||||||||||
node · current User-defined AutoProbe condition 64 failed. | |||||||||||||||||||||
| NtlpAgentDiagnosticAlarms | 1.3.6.1.4.1.850.1.3.3.1.3 | ||||||||||||||||||||
| NtlpAgentDiagnosticCPUUsageHigh | 1.3.6.1.4.1.850.1.3.3.1.3.1 | ||||||||||||||||||||
node · current The CPU usage of the PowerAlert is high. | |||||||||||||||||||||
| NtlpAgentDiagnosticMemoryUsageHigh | 1.3.6.1.4.1.850.1.3.3.1.3.2 | ||||||||||||||||||||
node · current The memory usage of PowerAlert is high. | |||||||||||||||||||||
| NtlpAgentDiagnosticServiceFailed | 1.3.6.1.4.1.850.1.3.3.1.3.3 | ||||||||||||||||||||
node · current One or more PowerAlert services failed. | |||||||||||||||||||||
| NtlpAgentConfigurationAlarms | 1.3.6.1.4.1.850.1.3.3.1.4 | ||||||||||||||||||||
| NtlpAgentConfigurationBackedUp | 1.3.6.1.4.1.850.1.3.3.1.4.1 | ||||||||||||||||||||
node · current PowerAlert configuration was backed up. | |||||||||||||||||||||
| NtlpAgentConfigurationImported | 1.3.6.1.4.1.850.1.3.3.1.4.2 | ||||||||||||||||||||
node · current PowerAlert configuration was imported. | |||||||||||||||||||||
| NtlpAgentConfigurationRestored | 1.3.6.1.4.1.850.1.3.3.1.4.3 | ||||||||||||||||||||
node · current PowerAlert configuration was restored. | |||||||||||||||||||||
| NtlpAgentMaintenanceAlarms | 1.3.6.1.4.1.850.1.3.3.1.5 | ||||||||||||||||||||
| NtlpAgentStarted | 1.3.6.1.4.1.850.1.3.3.1.5.1 | ||||||||||||||||||||
node · current PowerAlert started. | |||||||||||||||||||||
| NtlpAgentStopped | 1.3.6.1.4.1.850.1.3.3.1.5.2 | ||||||||||||||||||||
node · current PowerAlert stopped. | |||||||||||||||||||||
| NtlpAgentRebootInitiated | 1.3.6.1.4.1.850.1.3.3.1.5.3 | ||||||||||||||||||||
node · current PowerAlert reboot was initiated. | |||||||||||||||||||||
| NtlpAgentFirmwareUpdated | 1.3.6.1.4.1.850.1.3.3.1.5.4 | ||||||||||||||||||||
node · current PowerAlert firmware was updated. | |||||||||||||||||||||
| NtlpAgentRestoreFactoryDefaults | 1.3.6.1.4.1.850.1.3.3.1.5.5 | ||||||||||||||||||||
node · current PowerAlert restoration to factory defaults was initiated. | |||||||||||||||||||||
| NtlpAgentUserManagementAlarms | 1.3.6.1.4.1.850.1.3.3.1.6 | ||||||||||||||||||||
| NtlpAgentUserPasswordChanged | 1.3.6.1.4.1.850.1.3.3.1.6.1 | ||||||||||||||||||||
node · current A user password was changed. | |||||||||||||||||||||
| NtlpAgentUserAdded | 1.3.6.1.4.1.850.1.3.3.1.6.2 | ||||||||||||||||||||
node · current A user was added. | |||||||||||||||||||||
| NtlpAgentUserModified | 1.3.6.1.4.1.850.1.3.3.1.6.3 | ||||||||||||||||||||
node · current A user was modified. | |||||||||||||||||||||
| NtlpAgentUserDeleted | 1.3.6.1.4.1.850.1.3.3.1.6.4 | ||||||||||||||||||||
node · current A user was deleted. | |||||||||||||||||||||
| NtlpAgentUserConditionOccurred | 1.3.6.1.4.1.850.1.3.3.1.6.5 | ||||||||||||||||||||
node · current A generic user management condition occurred. | |||||||||||||||||||||
| NtlpAgentRoleAdded | 1.3.6.1.4.1.850.1.3.3.1.6.6 | ||||||||||||||||||||
node · current A role was added. | |||||||||||||||||||||
| NtlpAgentRoleModified | 1.3.6.1.4.1.850.1.3.3.1.6.7 | ||||||||||||||||||||
node · current A role was modified. | |||||||||||||||||||||
| NtlpAgentRoleDeleted | 1.3.6.1.4.1.850.1.3.3.1.6.8 | ||||||||||||||||||||
node · current A role was deleted. | |||||||||||||||||||||
| NtlpDeviceAlarms | 1.3.6.1.4.1.850.1.3.3.2 | ||||||||||||||||||||
| NtlpAlarmCommunicationsLost | 1.3.6.1.4.1.850.1.3.3.2.1 | ||||||||||||||||||||
node · current A problem has been encountered in the communications between the agent and the device. | |||||||||||||||||||||
| NtlpAlarmUserDefined | 1.3.6.1.4.1.850.1.3.3.2.2 | ||||||||||||||||||||
| NtlpAlarmUserDefined01 | 1.3.6.1.4.1.850.1.3.3.2.2.1 | ||||||||||||||||||||
node · current User-defined event 1 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined02 | 1.3.6.1.4.1.850.1.3.3.2.2.2 | ||||||||||||||||||||
node · current User-defined event 2 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined03 | 1.3.6.1.4.1.850.1.3.3.2.2.3 | ||||||||||||||||||||
node · current User-defined event 3 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined04 | 1.3.6.1.4.1.850.1.3.3.2.2.4 | ||||||||||||||||||||
node · current User-defined event 4 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined05 | 1.3.6.1.4.1.850.1.3.3.2.2.5 | ||||||||||||||||||||
node · current User-defined event 5 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined06 | 1.3.6.1.4.1.850.1.3.3.2.2.6 | ||||||||||||||||||||
node · current User-defined event 6 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined07 | 1.3.6.1.4.1.850.1.3.3.2.2.7 | ||||||||||||||||||||
node · current User-defined event 7 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined08 | 1.3.6.1.4.1.850.1.3.3.2.2.8 | ||||||||||||||||||||
node · current User-defined event 8 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined09 | 1.3.6.1.4.1.850.1.3.3.2.2.9 | ||||||||||||||||||||
node · current User-defined event 9 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined10 | 1.3.6.1.4.1.850.1.3.3.2.2.10 | ||||||||||||||||||||
node · current User-defined event 10 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined11 | 1.3.6.1.4.1.850.1.3.3.2.2.11 | ||||||||||||||||||||
node · current User-defined event 11 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined12 | 1.3.6.1.4.1.850.1.3.3.2.2.12 | ||||||||||||||||||||
node · current User-defined event 12 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined13 | 1.3.6.1.4.1.850.1.3.3.2.2.13 | ||||||||||||||||||||
node · current User-defined event 13 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined14 | 1.3.6.1.4.1.850.1.3.3.2.2.14 | ||||||||||||||||||||
node · current User-defined event 14 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined15 | 1.3.6.1.4.1.850.1.3.3.2.2.15 | ||||||||||||||||||||
node · current User-defined event 15 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined16 | 1.3.6.1.4.1.850.1.3.3.2.2.16 | ||||||||||||||||||||
node · current User-defined event 16 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined17 | 1.3.6.1.4.1.850.1.3.3.2.2.17 | ||||||||||||||||||||
node · current User-defined event 17 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined18 | 1.3.6.1.4.1.850.1.3.3.2.2.18 | ||||||||||||||||||||
node · current User-defined event 18 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined19 | 1.3.6.1.4.1.850.1.3.3.2.2.19 | ||||||||||||||||||||
node · current User-defined event 19 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined20 | 1.3.6.1.4.1.850.1.3.3.2.2.20 | ||||||||||||||||||||
node · current User-defined event 20 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined21 | 1.3.6.1.4.1.850.1.3.3.2.2.21 | ||||||||||||||||||||
node · current User-defined event 21 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined22 | 1.3.6.1.4.1.850.1.3.3.2.2.22 | ||||||||||||||||||||
node · current User-defined event 22 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined23 | 1.3.6.1.4.1.850.1.3.3.2.2.23 | ||||||||||||||||||||
node · current User-defined event 23 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined24 | 1.3.6.1.4.1.850.1.3.3.2.2.24 | ||||||||||||||||||||
node · current User-defined event 24 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined25 | 1.3.6.1.4.1.850.1.3.3.2.2.25 | ||||||||||||||||||||
node · current User-defined event 25 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined26 | 1.3.6.1.4.1.850.1.3.3.2.2.26 | ||||||||||||||||||||
node · current User-defined event 26 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined27 | 1.3.6.1.4.1.850.1.3.3.2.2.27 | ||||||||||||||||||||
node · current User-defined event 27 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined28 | 1.3.6.1.4.1.850.1.3.3.2.2.28 | ||||||||||||||||||||
node · current User-defined event 28 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined29 | 1.3.6.1.4.1.850.1.3.3.2.2.29 | ||||||||||||||||||||
node · current User-defined event 29 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined30 | 1.3.6.1.4.1.850.1.3.3.2.2.30 | ||||||||||||||||||||
node · current User-defined event 30 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined31 | 1.3.6.1.4.1.850.1.3.3.2.2.31 | ||||||||||||||||||||
node · current User-defined event 31 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined32 | 1.3.6.1.4.1.850.1.3.3.2.2.32 | ||||||||||||||||||||
node · current User-defined event 32 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined33 | 1.3.6.1.4.1.850.1.3.3.2.2.33 | ||||||||||||||||||||
node · current User-defined event 33 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined34 | 1.3.6.1.4.1.850.1.3.3.2.2.34 | ||||||||||||||||||||
node · current User-defined event 34 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined35 | 1.3.6.1.4.1.850.1.3.3.2.2.35 | ||||||||||||||||||||
node · current User-defined event 35 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined36 | 1.3.6.1.4.1.850.1.3.3.2.2.36 | ||||||||||||||||||||
node · current User-defined event 36 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined37 | 1.3.6.1.4.1.850.1.3.3.2.2.37 | ||||||||||||||||||||
node · current User-defined event 37 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined38 | 1.3.6.1.4.1.850.1.3.3.2.2.38 | ||||||||||||||||||||
node · current User-defined event 38 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined39 | 1.3.6.1.4.1.850.1.3.3.2.2.39 | ||||||||||||||||||||
node · current User-defined event 39 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined40 | 1.3.6.1.4.1.850.1.3.3.2.2.40 | ||||||||||||||||||||
node · current User-defined event 40 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined41 | 1.3.6.1.4.1.850.1.3.3.2.2.41 | ||||||||||||||||||||
node · current User-defined event 41 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined42 | 1.3.6.1.4.1.850.1.3.3.2.2.42 | ||||||||||||||||||||
node · current User-defined event 42 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined43 | 1.3.6.1.4.1.850.1.3.3.2.2.43 | ||||||||||||||||||||
node · current User-defined event 43 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined44 | 1.3.6.1.4.1.850.1.3.3.2.2.44 | ||||||||||||||||||||
node · current User-defined event 44 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined45 | 1.3.6.1.4.1.850.1.3.3.2.2.45 | ||||||||||||||||||||
node · current User-defined event 45 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined46 | 1.3.6.1.4.1.850.1.3.3.2.2.46 | ||||||||||||||||||||
node · current User-defined event 46 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined47 | 1.3.6.1.4.1.850.1.3.3.2.2.47 | ||||||||||||||||||||
node · current User-defined event 47 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined48 | 1.3.6.1.4.1.850.1.3.3.2.2.48 | ||||||||||||||||||||
node · current User-defined event 48 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined49 | 1.3.6.1.4.1.850.1.3.3.2.2.49 | ||||||||||||||||||||
node · current User-defined event 49 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined50 | 1.3.6.1.4.1.850.1.3.3.2.2.50 | ||||||||||||||||||||
node · current User-defined event 50 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined51 | 1.3.6.1.4.1.850.1.3.3.2.2.51 | ||||||||||||||||||||
node · current User-defined event 51 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined52 | 1.3.6.1.4.1.850.1.3.3.2.2.52 | ||||||||||||||||||||
node · current User-defined event 52 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined53 | 1.3.6.1.4.1.850.1.3.3.2.2.53 | ||||||||||||||||||||
node · current User-defined event 53 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined54 | 1.3.6.1.4.1.850.1.3.3.2.2.54 | ||||||||||||||||||||
node · current User-defined event 54 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined55 | 1.3.6.1.4.1.850.1.3.3.2.2.55 | ||||||||||||||||||||
node · current User-defined event 55 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined56 | 1.3.6.1.4.1.850.1.3.3.2.2.56 | ||||||||||||||||||||
node · current User-defined event 56 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined57 | 1.3.6.1.4.1.850.1.3.3.2.2.57 | ||||||||||||||||||||
node · current User-defined event 57 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined58 | 1.3.6.1.4.1.850.1.3.3.2.2.58 | ||||||||||||||||||||
node · current User-defined event 58 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined59 | 1.3.6.1.4.1.850.1.3.3.2.2.59 | ||||||||||||||||||||
node · current User-defined event 59 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined60 | 1.3.6.1.4.1.850.1.3.3.2.2.60 | ||||||||||||||||||||
node · current User-defined event 60 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined61 | 1.3.6.1.4.1.850.1.3.3.2.2.61 | ||||||||||||||||||||
node · current User-defined event 61 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined62 | 1.3.6.1.4.1.850.1.3.3.2.2.62 | ||||||||||||||||||||
node · current User-defined event 62 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined63 | 1.3.6.1.4.1.850.1.3.3.2.2.63 | ||||||||||||||||||||
node · current User-defined event 63 is in alarm. | |||||||||||||||||||||
| NtlpAlarmUserDefined64 | 1.3.6.1.4.1.850.1.3.3.2.2.64 | ||||||||||||||||||||
node · current User-defined event 64 is in alarm. | |||||||||||||||||||||
| NtlpAlarmInternalFirmwareError | 1.3.6.1.4.1.850.1.3.3.2.3 | ||||||||||||||||||||
node · current A problem has been encountered with the device firmware. | |||||||||||||||||||||
| NtlpAlarmDeviceEEPROMFault | 1.3.6.1.4.1.850.1.3.3.2.4 | ||||||||||||||||||||
node · current A problem has been encountered with the device EEPROM. | |||||||||||||||||||||
| NtlpUpsAlarms | 1.3.6.1.4.1.850.1.3.3.3 | ||||||||||||||||||||
| NtlpUpsAlarmBatteryBad | 1.3.6.1.4.1.850.1.3.3.3.1 | ||||||||||||||||||||
node · current One or more batteries have been determined to require replacement. | |||||||||||||||||||||
| NtlpUpsAlarmOnBattery | 1.3.6.1.4.1.850.1.3.3.3.2 | ||||||||||||||||||||
node · current The ups is drawing power from the batteries. | |||||||||||||||||||||
| NtlpUpsAlarmLowBattery | 1.3.6.1.4.1.850.1.3.3.3.3 | ||||||||||||||||||||
node · current The remaining battery charge is less than or equal to the percentage of capacity warning specified by tlpUpsConfigBatteryCapacityThreshold. | |||||||||||||||||||||
| NtlpUpsAlarmDepletedBattery | 1.3.6.1.4.1.850.1.3.3.3.4 | ||||||||||||||||||||
node · current The ups will be unable to sustain the present load when and if the utility power is lost. | |||||||||||||||||||||
| NtlpUpsAlarmTempBad | 1.3.6.1.4.1.850.1.3.3.3.5 | ||||||||||||||||||||
node · current A temperature is out of tolerance. | |||||||||||||||||||||
| NtlpUpsAlarmInputBad | 1.3.6.1.4.1.850.1.3.3.3.6 | ||||||||||||||||||||
node · current An input condition is out of tolerance. | |||||||||||||||||||||
| NtlpUpsAlarmOutputBad | 1.3.6.1.4.1.850.1.3.3.3.7 | ||||||||||||||||||||
node · current An output condition (other than OutputOverload) is out of tolerance. | |||||||||||||||||||||
| NtlpUpsAlarmOutputOverload | 1.3.6.1.4.1.850.1.3.3.3.8 | ||||||||||||||||||||
node · current The output load exceeds the ups output capacity. | |||||||||||||||||||||
| NtlpUpsAlarmOnBypass | 1.3.6.1.4.1.850.1.3.3.3.9 | ||||||||||||||||||||
node · current The Bypass is presently engaged on the ups. | |||||||||||||||||||||
| NtlpUpsAlarmBypassBad | 1.3.6.1.4.1.850.1.3.3.3.10 | ||||||||||||||||||||
node · current The Bypass is out of tolerance. | |||||||||||||||||||||
| NtlpUpsAlarmOutputOffAsRequested | 1.3.6.1.4.1.850.1.3.3.3.11 | ||||||||||||||||||||
node · current The ups has shutdown as requested, i.e., the output is off. | |||||||||||||||||||||
| NtlpUpsAlarmUpsOffAsRequested | 1.3.6.1.4.1.850.1.3.3.3.12 | ||||||||||||||||||||
node · current The entire ups has shutdown as commanded. | |||||||||||||||||||||
| NtlpUpsAlarmChargerFailed | 1.3.6.1.4.1.850.1.3.3.3.13 | ||||||||||||||||||||
node · current An uncorrected problem has been detected within the ups charger subsystem. | |||||||||||||||||||||
| NtlpUpsAlarmOutputOff | 1.3.6.1.4.1.850.1.3.3.3.14 | ||||||||||||||||||||
node · current The output of the ups is in the off state. | |||||||||||||||||||||
| NtlpUpsAlarmUpsOff | 1.3.6.1.4.1.850.1.3.3.3.15 | ||||||||||||||||||||
node · current The ups is in the off state. | |||||||||||||||||||||
| NtlpUpsAlarmFanFailure | 1.3.6.1.4.1.850.1.3.3.3.16 | ||||||||||||||||||||
node · current The failure of one or more fans in the ups has been detected. | |||||||||||||||||||||
| NtlpUpsAlarmFuseFailure | 1.3.6.1.4.1.850.1.3.3.3.17 | ||||||||||||||||||||
node · current The failure of one or more fuses has been detected. | |||||||||||||||||||||
| NtlpUpsAlarmGeneralFault | 1.3.6.1.4.1.850.1.3.3.3.18 | ||||||||||||||||||||
node · current A general fault in the ups has been detected. | |||||||||||||||||||||
| NtlpUpsAlarmDiagnosticTestFailed | 1.3.6.1.4.1.850.1.3.3.3.19 | ||||||||||||||||||||
node · current The result of the last diagnostic test indicates a failure. | |||||||||||||||||||||
| NtlpUpsAlarmAwaitingPower | 1.3.6.1.4.1.850.1.3.3.3.20 | ||||||||||||||||||||
node · current The ups output is off and the ups is awaiting the return of input power. | |||||||||||||||||||||
| NtlpUpsAlarmShutdownPending | 1.3.6.1.4.1.850.1.3.3.3.21 | ||||||||||||||||||||
node · current A tlpUpsShutdownAfterDelay countdown is underway. | |||||||||||||||||||||
| NtlpUpsAlarmShutdownImminent | 1.3.6.1.4.1.850.1.3.3.3.22 | ||||||||||||||||||||
node · current The ups will turn off power to the load in less than 5 seconds; this may be either a timed shutdown or a low battery shutdown. | |||||||||||||||||||||
| NtlpUpsAlarmLoadLevelAboveThreshold | 1.3.6.1.4.1.850.1.3.3.3.23 | ||||||||||||||||||||
| NtlpUpsAlarmLoadLevelAboveThresholdTotal | 1.3.6.1.4.1.850.1.3.3.3.23.1 | ||||||||||||||||||||
node · current The total load (output utilization) level is above the designated threshold. | |||||||||||||||||||||
| NtlpUpsAlarmLoadLevelAboveThresholdPhase1 | 1.3.6.1.4.1.850.1.3.3.3.23.2 | ||||||||||||||||||||
node · current The load (output utilization) level on phase 1 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmLoadLevelAboveThresholdPhase2 | 1.3.6.1.4.1.850.1.3.3.3.23.3 | ||||||||||||||||||||
node · current The load (output utilization) level on phase 2 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmLoadLevelAboveThresholdPhase3 | 1.3.6.1.4.1.850.1.3.3.3.23.4 | ||||||||||||||||||||
node · current The load (output utilization) level on phase 3 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmOutputCurrentChanged | 1.3.6.1.4.1.850.1.3.3.3.24 | deprecated | |||||||||||||||||||
node · deprecated The output current changed from its last known value. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryAgeAboveThreshold | 1.3.6.1.4.1.850.1.3.3.3.25 | ||||||||||||||||||||
node · current One or more batteries have been determined to require replacement. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff | 1.3.6.1.4.1.850.1.3.3.3.26 | ||||||||||||||||||||
| NtlpUpsAlarmLoadOff01 | 1.3.6.1.4.1.850.1.3.3.3.26.1 | ||||||||||||||||||||
node · current Load 1 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff02 | 1.3.6.1.4.1.850.1.3.3.3.26.2 | ||||||||||||||||||||
node · current Load 2 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff03 | 1.3.6.1.4.1.850.1.3.3.3.26.3 | ||||||||||||||||||||
node · current Load 3 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff04 | 1.3.6.1.4.1.850.1.3.3.3.26.4 | ||||||||||||||||||||
node · current Load 4 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff05 | 1.3.6.1.4.1.850.1.3.3.3.26.5 | ||||||||||||||||||||
node · current Load 5 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff06 | 1.3.6.1.4.1.850.1.3.3.3.26.6 | ||||||||||||||||||||
node · current Load 6 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff07 | 1.3.6.1.4.1.850.1.3.3.3.26.7 | ||||||||||||||||||||
node · current Load 7 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff08 | 1.3.6.1.4.1.850.1.3.3.3.26.8 | ||||||||||||||||||||
node · current Load 8 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff09 | 1.3.6.1.4.1.850.1.3.3.3.26.9 | ||||||||||||||||||||
node · current Load 9 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff10 | 1.3.6.1.4.1.850.1.3.3.3.26.10 | ||||||||||||||||||||
node · current Load 10 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff11 | 1.3.6.1.4.1.850.1.3.3.3.26.11 | ||||||||||||||||||||
node · current Load 11 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff12 | 1.3.6.1.4.1.850.1.3.3.3.26.12 | ||||||||||||||||||||
node · current Load 12 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff13 | 1.3.6.1.4.1.850.1.3.3.3.26.13 | ||||||||||||||||||||
node · current Load 13 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff14 | 1.3.6.1.4.1.850.1.3.3.3.26.14 | ||||||||||||||||||||
node · current Load 14 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff15 | 1.3.6.1.4.1.850.1.3.3.3.26.15 | ||||||||||||||||||||
node · current Load 15 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff16 | 1.3.6.1.4.1.850.1.3.3.3.26.16 | ||||||||||||||||||||
node · current Load 16 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff17 | 1.3.6.1.4.1.850.1.3.3.3.26.17 | ||||||||||||||||||||
node · current Load 17 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff18 | 1.3.6.1.4.1.850.1.3.3.3.26.18 | ||||||||||||||||||||
node · current Load 18 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff19 | 1.3.6.1.4.1.850.1.3.3.3.26.19 | ||||||||||||||||||||
node · current Load 19 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff20 | 1.3.6.1.4.1.850.1.3.3.3.26.20 | ||||||||||||||||||||
node · current Load 20 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff21 | 1.3.6.1.4.1.850.1.3.3.3.26.21 | ||||||||||||||||||||
node · current Load 21 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff22 | 1.3.6.1.4.1.850.1.3.3.3.26.22 | ||||||||||||||||||||
node · current Load 22 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff23 | 1.3.6.1.4.1.850.1.3.3.3.26.23 | ||||||||||||||||||||
node · current Load 23 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff24 | 1.3.6.1.4.1.850.1.3.3.3.26.24 | ||||||||||||||||||||
node · current Load 24 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff25 | 1.3.6.1.4.1.850.1.3.3.3.26.25 | ||||||||||||||||||||
node · current Load 25 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff26 | 1.3.6.1.4.1.850.1.3.3.3.26.26 | ||||||||||||||||||||
node · current Load 26 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff27 | 1.3.6.1.4.1.850.1.3.3.3.26.27 | ||||||||||||||||||||
node · current Load 27 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff28 | 1.3.6.1.4.1.850.1.3.3.3.26.28 | ||||||||||||||||||||
node · current Load 28 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff29 | 1.3.6.1.4.1.850.1.3.3.3.26.29 | ||||||||||||||||||||
node · current Load 29 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff30 | 1.3.6.1.4.1.850.1.3.3.3.26.30 | ||||||||||||||||||||
node · current Load 30 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff31 | 1.3.6.1.4.1.850.1.3.3.3.26.31 | ||||||||||||||||||||
node · current Load 31 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff32 | 1.3.6.1.4.1.850.1.3.3.3.26.32 | ||||||||||||||||||||
node · current Load 32 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff33 | 1.3.6.1.4.1.850.1.3.3.3.26.33 | ||||||||||||||||||||
node · current Load 33 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff34 | 1.3.6.1.4.1.850.1.3.3.3.26.34 | ||||||||||||||||||||
node · current Load 34 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff35 | 1.3.6.1.4.1.850.1.3.3.3.26.35 | ||||||||||||||||||||
node · current Load 35 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff36 | 1.3.6.1.4.1.850.1.3.3.3.26.36 | ||||||||||||||||||||
node · current Load 36 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff37 | 1.3.6.1.4.1.850.1.3.3.3.26.37 | ||||||||||||||||||||
node · current Load 37 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff38 | 1.3.6.1.4.1.850.1.3.3.3.26.38 | ||||||||||||||||||||
node · current Load 38 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff39 | 1.3.6.1.4.1.850.1.3.3.3.26.39 | ||||||||||||||||||||
node · current Load 39 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff40 | 1.3.6.1.4.1.850.1.3.3.3.26.40 | ||||||||||||||||||||
node · current Load 40 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff41 | 1.3.6.1.4.1.850.1.3.3.3.26.41 | ||||||||||||||||||||
node · current Load 41 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff42 | 1.3.6.1.4.1.850.1.3.3.3.26.42 | ||||||||||||||||||||
node · current Load 42 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff43 | 1.3.6.1.4.1.850.1.3.3.3.26.43 | ||||||||||||||||||||
node · current Load 43 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff44 | 1.3.6.1.4.1.850.1.3.3.3.26.44 | ||||||||||||||||||||
node · current Load 44 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff45 | 1.3.6.1.4.1.850.1.3.3.3.26.45 | ||||||||||||||||||||
node · current Load 45 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff46 | 1.3.6.1.4.1.850.1.3.3.3.26.46 | ||||||||||||||||||||
node · current Load 46 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff47 | 1.3.6.1.4.1.850.1.3.3.3.26.47 | ||||||||||||||||||||
node · current Load 47 is off. | |||||||||||||||||||||
| NtlpUpsAlarmLoadOff48 | 1.3.6.1.4.1.850.1.3.3.3.26.48 | ||||||||||||||||||||
node · current Load 48 is off. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold | 1.3.6.1.4.1.850.1.3.3.3.27 | ||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold1 | 1.3.6.1.4.1.850.1.3.3.3.27.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold2 | 1.3.6.1.4.1.850.1.3.3.3.27.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold3 | 1.3.6.1.4.1.850.1.3.3.3.27.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold4 | 1.3.6.1.4.1.850.1.3.3.3.27.4 | ||||||||||||||||||||
node · current The output current on l1-n exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold5 | 1.3.6.1.4.1.850.1.3.3.3.27.5 | ||||||||||||||||||||
node · current The output current on l2-n exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentAboveThreshold6 | 1.3.6.1.4.1.850.1.3.3.3.27.6 | ||||||||||||||||||||
node · current The output current on l3-n exceeds load limits. | |||||||||||||||||||||
| NtlpUpsAlarmRuntimeBelowWarningLevel | 1.3.6.1.4.1.850.1.3.3.3.28 | ||||||||||||||||||||
node · current The battery seconds remaining is below warning level. | |||||||||||||||||||||
| NtlpUpsAlarmBusStartVoltageLow | 1.3.6.1.4.1.850.1.3.3.3.29 | ||||||||||||||||||||
node · current The inverter start up bus voltage is too low. | |||||||||||||||||||||
| NtlpUpsAlarmBusOverVoltage | 1.3.6.1.4.1.850.1.3.3.3.30 | ||||||||||||||||||||
node · current The inverter bus voltage is too high. | |||||||||||||||||||||
| NtlpUpsAlarmBusUnderVoltage | 1.3.6.1.4.1.850.1.3.3.3.31 | ||||||||||||||||||||
node · current The inverter bus voltage is too low. | |||||||||||||||||||||
| NtlpUpsAlarmBusVoltageUnbalanced | 1.3.6.1.4.1.850.1.3.3.3.32 | ||||||||||||||||||||
node · current The inverter bus voltage is not balanced. | |||||||||||||||||||||
| NtlpUpsAlarmInverterSoftStartBad | 1.3.6.1.4.1.850.1.3.3.3.33 | ||||||||||||||||||||
node · current The inverter bus voltage cannot reach desired voltage within a specified duration. | |||||||||||||||||||||
| NtlpUpsAlarmInverterOverVoltage | 1.3.6.1.4.1.850.1.3.3.3.34 | ||||||||||||||||||||
node · current The inverter voltage is too high. | |||||||||||||||||||||
| NtlpUpsAlarmInverterUnderVoltage | 1.3.6.1.4.1.850.1.3.3.3.35 | ||||||||||||||||||||
node · current The inverter voltage is too low. | |||||||||||||||||||||
| NtlpUpsAlarmInverterCircuitBad | 1.3.6.1.4.1.850.1.3.3.3.36 | ||||||||||||||||||||
node · current The inverter output is shorted. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryOverVoltage | 1.3.6.1.4.1.850.1.3.3.3.37 | ||||||||||||||||||||
node · current The battery voltage is too high. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryUnderVoltage | 1.3.6.1.4.1.850.1.3.3.3.38 | ||||||||||||||||||||
node · current The battery voltage is too low. | |||||||||||||||||||||
| NtlpUpsAlarmSiteWiringFault | 1.3.6.1.4.1.850.1.3.3.3.39 | ||||||||||||||||||||
node · current The utility input wiring is faulty. | |||||||||||||||||||||
| NtlpUpsAlarmOverTemperatureProtection | 1.3.6.1.4.1.850.1.3.3.3.40 | ||||||||||||||||||||
node · current The over temperature protection is activated. | |||||||||||||||||||||
| NtlpUpsAlarmOverCharged | 1.3.6.1.4.1.850.1.3.3.3.41 | ||||||||||||||||||||
node · current The ups is over charged. | |||||||||||||||||||||
| NtlpUpsAlarmEPOActive | 1.3.6.1.4.1.850.1.3.3.3.42 | ||||||||||||||||||||
node · current The EPO is currently activated. | |||||||||||||||||||||
| NtlpUpsAlarmBypassFrequencyBad | 1.3.6.1.4.1.850.1.3.3.3.43 | ||||||||||||||||||||
node · current The bypass frequency is out of tolerance. | |||||||||||||||||||||
| NtlpUpsAlarmExternalSmartBatteryAgeAboveThreshold | 1.3.6.1.4.1.850.1.3.3.3.44 | ||||||||||||||||||||
node · current One or more external smart batteries have been determined to require replacement. | |||||||||||||||||||||
| NtlpUpsAlarmExternalNonSmartBatteryAgeAboveThreshold | 1.3.6.1.4.1.850.1.3.3.3.45 | ||||||||||||||||||||
node · current One or more external non-smart batteries have been determined to require replacement. | |||||||||||||||||||||
| NtlpUpsAlarmInternalSmartBatteryCommLost | 1.3.6.1.4.1.850.1.3.3.3.46 | ||||||||||||||||||||
node · current Communications with the internal smart batteries was lost. | |||||||||||||||||||||
| NtlpUpsAlarmLoadsNotAllOn | 1.3.6.1.4.1.850.1.3.3.3.47 | ||||||||||||||||||||
node · current One of more loads are not on. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryTemperatureHigh | 1.3.6.1.4.1.850.1.3.3.3.48 | ||||||||||||||||||||
node · current The battery temperature is high. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryTemperatureLow | 1.3.6.1.4.1.850.1.3.3.3.49 | ||||||||||||||||||||
node · current The battery temperature is low. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryDisconnected | 1.3.6.1.4.1.850.1.3.3.3.50 | ||||||||||||||||||||
node · current The battery disconnected. | |||||||||||||||||||||
| NtlpUpsAlarmBatteryTemperatureSensorDisconnected | 1.3.6.1.4.1.850.1.3.3.3.51 | ||||||||||||||||||||
node · current The battery temperature sensor disconnected. | |||||||||||||||||||||
| NtlpUpsAlarmTemperatureDerating | 1.3.6.1.4.1.850.1.3.3.3.52 | ||||||||||||||||||||
node · current Power derating due to high environment temperature. | |||||||||||||||||||||
| NtlpUpsAlarmInputContact | 1.3.6.1.4.1.850.1.3.3.3.53 | ||||||||||||||||||||
| NtlpUpsAlarmInputContact1 | 1.3.6.1.4.1.850.1.3.3.3.53.1 | ||||||||||||||||||||
node · current Input contact 1 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact | 1.3.6.1.4.1.850.1.3.3.3.54 | ||||||||||||||||||||
| NtlpUpsAlarmOutputContact1 | 1.3.6.1.4.1.850.1.3.3.3.54.1 | ||||||||||||||||||||
node · current Output contact 1 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact2 | 1.3.6.1.4.1.850.1.3.3.3.54.2 | ||||||||||||||||||||
node · current Output contact 2 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact3 | 1.3.6.1.4.1.850.1.3.3.3.54.3 | ||||||||||||||||||||
node · current Output contact 3 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact4 | 1.3.6.1.4.1.850.1.3.3.3.54.4 | ||||||||||||||||||||
node · current Output contact 4 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact5 | 1.3.6.1.4.1.850.1.3.3.3.54.5 | ||||||||||||||||||||
node · current Output contact 5 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmOutputContact6 | 1.3.6.1.4.1.850.1.3.3.3.54.6 | ||||||||||||||||||||
node · current Output contact 6 in alarm. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold | 1.3.6.1.4.1.850.1.3.3.3.55 | ||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold1 | 1.3.6.1.4.1.850.1.3.3.3.55.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 is below load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold2 | 1.3.6.1.4.1.850.1.3.3.3.55.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 is below load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold3 | 1.3.6.1.4.1.850.1.3.3.3.55.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 is below load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold4 | 1.3.6.1.4.1.850.1.3.3.3.55.4 | ||||||||||||||||||||
node · current The output current on l1-n is below load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold5 | 1.3.6.1.4.1.850.1.3.3.3.55.5 | ||||||||||||||||||||
node · current The output current on l2-n is below load limits. | |||||||||||||||||||||
| NtlpUpsAlarmCurrentBelowThreshold6 | 1.3.6.1.4.1.850.1.3.3.3.55.6 | ||||||||||||||||||||
node · current The output current on l3-n is below load limits. | |||||||||||||||||||||
| NtlpPduAlarms | 1.3.6.1.4.1.850.1.3.3.4 | ||||||||||||||||||||
| NtlpPduAlarmLoadLevelAboveThreshold | 1.3.6.1.4.1.850.1.3.3.4.1 | ||||||||||||||||||||
node · current The load level is above the designated threshold. | |||||||||||||||||||||
| NtlpPduAlarmInputBad | 1.3.6.1.4.1.850.1.3.3.4.2 | ||||||||||||||||||||
node · current An input condition is out of tolerance. | |||||||||||||||||||||
| NtlpPduAlarmOutputBad | 1.3.6.1.4.1.850.1.3.3.4.3 | ||||||||||||||||||||
node · current An output condition (other than OutputOverload) is out of tolerance. | |||||||||||||||||||||
| NtlpPduAlarmOutputOverload | 1.3.6.1.4.1.850.1.3.3.4.4 | ||||||||||||||||||||
node · current The output load exceeds the pdu output capacity. | |||||||||||||||||||||
| NtlpPduAlarmOutputOff | 1.3.6.1.4.1.850.1.3.3.4.5 | ||||||||||||||||||||
node · current The output of the pdu is in the off state. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff | 1.3.6.1.4.1.850.1.3.3.4.6 | ||||||||||||||||||||
| NtlpPduAlarmLoadOff01 | 1.3.6.1.4.1.850.1.3.3.4.6.1 | ||||||||||||||||||||
node · current Load 1 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff02 | 1.3.6.1.4.1.850.1.3.3.4.6.2 | ||||||||||||||||||||
node · current Load 2 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff03 | 1.3.6.1.4.1.850.1.3.3.4.6.3 | ||||||||||||||||||||
node · current Load 3 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff04 | 1.3.6.1.4.1.850.1.3.3.4.6.4 | ||||||||||||||||||||
node · current Load 4 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff05 | 1.3.6.1.4.1.850.1.3.3.4.6.5 | ||||||||||||||||||||
node · current Load 5 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff06 | 1.3.6.1.4.1.850.1.3.3.4.6.6 | ||||||||||||||||||||
node · current Load 6 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff07 | 1.3.6.1.4.1.850.1.3.3.4.6.7 | ||||||||||||||||||||
node · current Load 7 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff08 | 1.3.6.1.4.1.850.1.3.3.4.6.8 | ||||||||||||||||||||
node · current Load 8 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff09 | 1.3.6.1.4.1.850.1.3.3.4.6.9 | ||||||||||||||||||||
node · current Load 9 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff10 | 1.3.6.1.4.1.850.1.3.3.4.6.10 | ||||||||||||||||||||
node · current Load 10 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff11 | 1.3.6.1.4.1.850.1.3.3.4.6.11 | ||||||||||||||||||||
node · current Load 11 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff12 | 1.3.6.1.4.1.850.1.3.3.4.6.12 | ||||||||||||||||||||
node · current Load 12 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff13 | 1.3.6.1.4.1.850.1.3.3.4.6.13 | ||||||||||||||||||||
node · current Load 13 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff14 | 1.3.6.1.4.1.850.1.3.3.4.6.14 | ||||||||||||||||||||
node · current Load 14 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff15 | 1.3.6.1.4.1.850.1.3.3.4.6.15 | ||||||||||||||||||||
node · current Load 15 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff16 | 1.3.6.1.4.1.850.1.3.3.4.6.16 | ||||||||||||||||||||
node · current Load 16 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff17 | 1.3.6.1.4.1.850.1.3.3.4.6.17 | ||||||||||||||||||||
node · current Load 17 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff18 | 1.3.6.1.4.1.850.1.3.3.4.6.18 | ||||||||||||||||||||
node · current Load 18 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff19 | 1.3.6.1.4.1.850.1.3.3.4.6.19 | ||||||||||||||||||||
node · current Load 19 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff20 | 1.3.6.1.4.1.850.1.3.3.4.6.20 | ||||||||||||||||||||
node · current Load 20 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff21 | 1.3.6.1.4.1.850.1.3.3.4.6.21 | ||||||||||||||||||||
node · current Load 21 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff22 | 1.3.6.1.4.1.850.1.3.3.4.6.22 | ||||||||||||||||||||
node · current Load 22 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff23 | 1.3.6.1.4.1.850.1.3.3.4.6.23 | ||||||||||||||||||||
node · current Load 23 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff24 | 1.3.6.1.4.1.850.1.3.3.4.6.24 | ||||||||||||||||||||
node · current Load 24 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff25 | 1.3.6.1.4.1.850.1.3.3.4.6.25 | ||||||||||||||||||||
node · current Load 25 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff26 | 1.3.6.1.4.1.850.1.3.3.4.6.26 | ||||||||||||||||||||
node · current Load 26 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff27 | 1.3.6.1.4.1.850.1.3.3.4.6.27 | ||||||||||||||||||||
node · current Load 27 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff28 | 1.3.6.1.4.1.850.1.3.3.4.6.28 | ||||||||||||||||||||
node · current Load 28 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff29 | 1.3.6.1.4.1.850.1.3.3.4.6.29 | ||||||||||||||||||||
node · current Load 29 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff30 | 1.3.6.1.4.1.850.1.3.3.4.6.30 | ||||||||||||||||||||
node · current Load 30 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff31 | 1.3.6.1.4.1.850.1.3.3.4.6.31 | ||||||||||||||||||||
node · current Load 31 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff32 | 1.3.6.1.4.1.850.1.3.3.4.6.32 | ||||||||||||||||||||
node · current Load 32 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff33 | 1.3.6.1.4.1.850.1.3.3.4.6.33 | ||||||||||||||||||||
node · current Load 33 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff34 | 1.3.6.1.4.1.850.1.3.3.4.6.34 | ||||||||||||||||||||
node · current Load 34 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff35 | 1.3.6.1.4.1.850.1.3.3.4.6.35 | ||||||||||||||||||||
node · current Load 35 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff36 | 1.3.6.1.4.1.850.1.3.3.4.6.36 | ||||||||||||||||||||
node · current Load 36 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff37 | 1.3.6.1.4.1.850.1.3.3.4.6.37 | ||||||||||||||||||||
node · current Load 37 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff38 | 1.3.6.1.4.1.850.1.3.3.4.6.38 | ||||||||||||||||||||
node · current Load 38 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff39 | 1.3.6.1.4.1.850.1.3.3.4.6.39 | ||||||||||||||||||||
node · current Load 39 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff40 | 1.3.6.1.4.1.850.1.3.3.4.6.40 | ||||||||||||||||||||
node · current Load 40 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff41 | 1.3.6.1.4.1.850.1.3.3.4.6.41 | ||||||||||||||||||||
node · current Load 41 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff42 | 1.3.6.1.4.1.850.1.3.3.4.6.42 | ||||||||||||||||||||
node · current Load 42 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff43 | 1.3.6.1.4.1.850.1.3.3.4.6.43 | ||||||||||||||||||||
node · current Load 43 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff44 | 1.3.6.1.4.1.850.1.3.3.4.6.44 | ||||||||||||||||||||
node · current Load 44 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff45 | 1.3.6.1.4.1.850.1.3.3.4.6.45 | ||||||||||||||||||||
node · current Load 45 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff46 | 1.3.6.1.4.1.850.1.3.3.4.6.46 | ||||||||||||||||||||
node · current Load 46 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff47 | 1.3.6.1.4.1.850.1.3.3.4.6.47 | ||||||||||||||||||||
node · current Load 47 is off. | |||||||||||||||||||||
| NtlpPduAlarmLoadOff48 | 1.3.6.1.4.1.850.1.3.3.4.6.48 | ||||||||||||||||||||
node · current Load 48 is off. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen | 1.3.6.1.4.1.850.1.3.3.4.7 | ||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen01 | 1.3.6.1.4.1.850.1.3.3.4.7.1 | ||||||||||||||||||||
node · current Circuit breaker 1 is open. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen02 | 1.3.6.1.4.1.850.1.3.3.4.7.2 | ||||||||||||||||||||
node · current Circuit breaker 2 is open. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen03 | 1.3.6.1.4.1.850.1.3.3.4.7.3 | ||||||||||||||||||||
node · current Circuit breaker 3 is open. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen04 | 1.3.6.1.4.1.850.1.3.3.4.7.4 | ||||||||||||||||||||
node · current Circuit breaker 4 is open. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen05 | 1.3.6.1.4.1.850.1.3.3.4.7.5 | ||||||||||||||||||||
node · current Circuit breaker 5 is open. | |||||||||||||||||||||
| NtlpPduAlarmCircuitBreakerOpen06 | 1.3.6.1.4.1.850.1.3.3.4.7.6 | ||||||||||||||||||||
node · current Circuit breaker 6 is open. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold | 1.3.6.1.4.1.850.1.3.3.4.8 | ||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold1 | 1.3.6.1.4.1.850.1.3.3.4.8.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold2 | 1.3.6.1.4.1.850.1.3.3.4.8.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold3 | 1.3.6.1.4.1.850.1.3.3.4.8.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold4 | 1.3.6.1.4.1.850.1.3.3.4.8.4 | ||||||||||||||||||||
node · current The output current on l1-n exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold5 | 1.3.6.1.4.1.850.1.3.3.4.8.5 | ||||||||||||||||||||
node · current The output current on l2-n exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentAboveThreshold6 | 1.3.6.1.4.1.850.1.3.3.4.8.6 | ||||||||||||||||||||
node · current The output current on l3-n exceeds load limits. | |||||||||||||||||||||
| NtlpPduAlarmLoadsNotAllOn | 1.3.6.1.4.1.850.1.3.3.4.9 | ||||||||||||||||||||
node · current One of more loads are not on. | |||||||||||||||||||||
| NtlpPduAlarmLoadLevelBelowThreshold | 1.3.6.1.4.1.850.1.3.3.4.10 | ||||||||||||||||||||
node · current The load level is below the designated threshold. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold | 1.3.6.1.4.1.850.1.3.3.4.11 | ||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold1 | 1.3.6.1.4.1.850.1.3.3.4.11.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold2 | 1.3.6.1.4.1.850.1.3.3.4.11.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold3 | 1.3.6.1.4.1.850.1.3.3.4.11.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold4 | 1.3.6.1.4.1.850.1.3.3.4.11.4 | ||||||||||||||||||||
node · current The output current on l1-n is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold5 | 1.3.6.1.4.1.850.1.3.3.4.11.5 | ||||||||||||||||||||
node · current The output current on l2-n is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmCurrentBelowThreshold6 | 1.3.6.1.4.1.850.1.3.3.4.11.6 | ||||||||||||||||||||
node · current The output current on l3-n is below load limits. | |||||||||||||||||||||
| NtlpPduAlarmThdOutOfRange | 1.3.6.1.4.1.850.1.3.3.4.12 | ||||||||||||||||||||
node · current The thd value is out of range. | |||||||||||||||||||||
| NtlpPduAlarmGeneralFault | 1.3.6.1.4.1.850.1.3.3.4.13 | ||||||||||||||||||||
node · current A general fault in the pdu has been detected. | |||||||||||||||||||||
| NtlpPduAlarmOutletOverCurrent | 1.3.6.1.4.1.850.1.3.3.4.14 | ||||||||||||||||||||
node · current One or more outlets is above load limits. | |||||||||||||||||||||
| NtlpEnvAlarms | 1.3.6.1.4.1.850.1.3.3.5 | ||||||||||||||||||||
| NtlpEnvAlarmTemperatureBeyondLimits | 1.3.6.1.4.1.850.1.3.3.5.1 | ||||||||||||||||||||
node · current The temperature exceeds limits. | |||||||||||||||||||||
| NtlpEnvAlarmHumidityBeyondLimits | 1.3.6.1.4.1.850.1.3.3.5.2 | ||||||||||||||||||||
node · current The humidity exceeds limits. | |||||||||||||||||||||
| NtlpEnvAlarmInputContact | 1.3.6.1.4.1.850.1.3.3.5.3 | ||||||||||||||||||||
| NtlpEnvAlarmInputContact01 | 1.3.6.1.4.1.850.1.3.3.5.3.1 | ||||||||||||||||||||
node · current Input contact 1 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmInputContact02 | 1.3.6.1.4.1.850.1.3.3.5.3.2 | ||||||||||||||||||||
node · current Input contact 2 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmInputContact03 | 1.3.6.1.4.1.850.1.3.3.5.3.3 | ||||||||||||||||||||
node · current Input contact 3 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmInputContact04 | 1.3.6.1.4.1.850.1.3.3.5.3.4 | ||||||||||||||||||||
node · current Input contact 4 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmOutputContact | 1.3.6.1.4.1.850.1.3.3.5.4 | ||||||||||||||||||||
| NtlpEnvAlarmOutputContact01 | 1.3.6.1.4.1.850.1.3.3.5.4.1 | ||||||||||||||||||||
node · current Output contact 1 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmOutputContact02 | 1.3.6.1.4.1.850.1.3.3.5.4.2 | ||||||||||||||||||||
node · current Output contact 2 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmOutputContact03 | 1.3.6.1.4.1.850.1.3.3.5.4.3 | ||||||||||||||||||||
node · current Output contact 3 is in alarm. | |||||||||||||||||||||
| NtlpEnvAlarmOutputContact04 | 1.3.6.1.4.1.850.1.3.3.5.4.4 | ||||||||||||||||||||
node · current Output contact 4 is in alarm. | |||||||||||||||||||||
| NtlpAtsAlarms | 1.3.6.1.4.1.850.1.3.3.6 | ||||||||||||||||||||
| NtlpAtsAlarmOutage | 1.3.6.1.4.1.850.1.3.3.6.1 | ||||||||||||||||||||
| NtlpAtsAlarmSource1Outage | 1.3.6.1.4.1.850.1.3.3.6.1.1 | ||||||||||||||||||||
node · current Input on source 1 is not present. For atss with the designation of primary and secondary, this alarm denotes input on the primary source is not present. | |||||||||||||||||||||
| NtlpAtsAlarmSource2Outage | 1.3.6.1.4.1.850.1.3.3.6.1.2 | ||||||||||||||||||||
node · current Input on source 2 is not present. For atss with the designation of primary and secondary, this alarm denotes input on the secondary source is not present. | |||||||||||||||||||||
| NtlpAtsAlarmTemperature | 1.3.6.1.4.1.850.1.3.3.6.2 | ||||||||||||||||||||
| NtlpAtsAlarmDeviceTemperature | 1.3.6.1.4.1.850.1.3.3.6.2.1 | ||||||||||||||||||||
node · current The device temperature is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmSource1Temperature | 1.3.6.1.4.1.850.1.3.3.6.2.2 | ||||||||||||||||||||
node · current The source 1 temperature is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmSource2Temperature | 1.3.6.1.4.1.850.1.3.3.6.2.3 | ||||||||||||||||||||
node · current The source 2 temperature is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmLoadLevelAboveThreshold | 1.3.6.1.4.1.850.1.3.3.6.3 | ||||||||||||||||||||
node · current The load level is above the designated threshold. | |||||||||||||||||||||
| NtlpAtsAlarmInputBad | 1.3.6.1.4.1.850.1.3.3.6.4 | ||||||||||||||||||||
node · current An input condition is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmOutputBad | 1.3.6.1.4.1.850.1.3.3.6.5 | ||||||||||||||||||||
node · current An output condition (other than OutputOverload) is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmOutputOverload | 1.3.6.1.4.1.850.1.3.3.6.6 | ||||||||||||||||||||
node · current The output load exceeds the ats output capacity. | |||||||||||||||||||||
| NtlpAtsAlarmOutputOff | 1.3.6.1.4.1.850.1.3.3.6.7 | ||||||||||||||||||||
node · current The output of the ats is in the off state. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff | 1.3.6.1.4.1.850.1.3.3.6.8 | ||||||||||||||||||||
| NtlpAtsAlarmLoadOff01 | 1.3.6.1.4.1.850.1.3.3.6.8.1 | ||||||||||||||||||||
node · current Load 1 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff02 | 1.3.6.1.4.1.850.1.3.3.6.8.2 | ||||||||||||||||||||
node · current Load 2 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff03 | 1.3.6.1.4.1.850.1.3.3.6.8.3 | ||||||||||||||||||||
node · current Load 3 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff04 | 1.3.6.1.4.1.850.1.3.3.6.8.4 | ||||||||||||||||||||
node · current Load 4 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff05 | 1.3.6.1.4.1.850.1.3.3.6.8.5 | ||||||||||||||||||||
node · current Load 5 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff06 | 1.3.6.1.4.1.850.1.3.3.6.8.6 | ||||||||||||||||||||
node · current Load 6 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff07 | 1.3.6.1.4.1.850.1.3.3.6.8.7 | ||||||||||||||||||||
node · current Load 7 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff08 | 1.3.6.1.4.1.850.1.3.3.6.8.8 | ||||||||||||||||||||
node · current Load 8 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff09 | 1.3.6.1.4.1.850.1.3.3.6.8.9 | ||||||||||||||||||||
node · current Load 9 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff10 | 1.3.6.1.4.1.850.1.3.3.6.8.10 | ||||||||||||||||||||
node · current Load 10 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff11 | 1.3.6.1.4.1.850.1.3.3.6.8.11 | ||||||||||||||||||||
node · current Load 11 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff12 | 1.3.6.1.4.1.850.1.3.3.6.8.12 | ||||||||||||||||||||
node · current Load 12 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff13 | 1.3.6.1.4.1.850.1.3.3.6.8.13 | ||||||||||||||||||||
node · current Load 13 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff14 | 1.3.6.1.4.1.850.1.3.3.6.8.14 | ||||||||||||||||||||
node · current Load 14 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff15 | 1.3.6.1.4.1.850.1.3.3.6.8.15 | ||||||||||||||||||||
node · current Load 15 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff16 | 1.3.6.1.4.1.850.1.3.3.6.8.16 | ||||||||||||||||||||
node · current Load 16 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff17 | 1.3.6.1.4.1.850.1.3.3.6.8.17 | ||||||||||||||||||||
node · current Load 17 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff18 | 1.3.6.1.4.1.850.1.3.3.6.8.18 | ||||||||||||||||||||
node · current Load 18 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff19 | 1.3.6.1.4.1.850.1.3.3.6.8.19 | ||||||||||||||||||||
node · current Load 19 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff20 | 1.3.6.1.4.1.850.1.3.3.6.8.20 | ||||||||||||||||||||
node · current Load 20 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff21 | 1.3.6.1.4.1.850.1.3.3.6.8.21 | ||||||||||||||||||||
node · current Load 21 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff22 | 1.3.6.1.4.1.850.1.3.3.6.8.22 | ||||||||||||||||||||
node · current Load 22 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff23 | 1.3.6.1.4.1.850.1.3.3.6.8.23 | ||||||||||||||||||||
node · current Load 23 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff24 | 1.3.6.1.4.1.850.1.3.3.6.8.24 | ||||||||||||||||||||
node · current Load 24 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff25 | 1.3.6.1.4.1.850.1.3.3.6.8.25 | ||||||||||||||||||||
node · current Load 25 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff26 | 1.3.6.1.4.1.850.1.3.3.6.8.26 | ||||||||||||||||||||
node · current Load 26 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff27 | 1.3.6.1.4.1.850.1.3.3.6.8.27 | ||||||||||||||||||||
node · current Load 27 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff28 | 1.3.6.1.4.1.850.1.3.3.6.8.28 | ||||||||||||||||||||
node · current Load 28 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff29 | 1.3.6.1.4.1.850.1.3.3.6.8.29 | ||||||||||||||||||||
node · current Load 29 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff30 | 1.3.6.1.4.1.850.1.3.3.6.8.30 | ||||||||||||||||||||
node · current Load 30 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff31 | 1.3.6.1.4.1.850.1.3.3.6.8.31 | ||||||||||||||||||||
node · current Load 31 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff32 | 1.3.6.1.4.1.850.1.3.3.6.8.32 | ||||||||||||||||||||
node · current Load 32 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff33 | 1.3.6.1.4.1.850.1.3.3.6.8.33 | ||||||||||||||||||||
node · current Load 33 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff34 | 1.3.6.1.4.1.850.1.3.3.6.8.34 | ||||||||||||||||||||
node · current Load 34 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff35 | 1.3.6.1.4.1.850.1.3.3.6.8.35 | ||||||||||||||||||||
node · current Load 35 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff36 | 1.3.6.1.4.1.850.1.3.3.6.8.36 | ||||||||||||||||||||
node · current Load 36 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff37 | 1.3.6.1.4.1.850.1.3.3.6.8.37 | ||||||||||||||||||||
node · current Load 37 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff38 | 1.3.6.1.4.1.850.1.3.3.6.8.38 | ||||||||||||||||||||
node · current Load 38 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff39 | 1.3.6.1.4.1.850.1.3.3.6.8.39 | ||||||||||||||||||||
node · current Load 39 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff40 | 1.3.6.1.4.1.850.1.3.3.6.8.40 | ||||||||||||||||||||
node · current Load 40 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff41 | 1.3.6.1.4.1.850.1.3.3.6.8.41 | ||||||||||||||||||||
node · current Load 41 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff42 | 1.3.6.1.4.1.850.1.3.3.6.8.42 | ||||||||||||||||||||
node · current Load 42 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff43 | 1.3.6.1.4.1.850.1.3.3.6.8.43 | ||||||||||||||||||||
node · current Load 43 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff44 | 1.3.6.1.4.1.850.1.3.3.6.8.44 | ||||||||||||||||||||
node · current Load 44 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff45 | 1.3.6.1.4.1.850.1.3.3.6.8.45 | ||||||||||||||||||||
node · current Load 45 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff46 | 1.3.6.1.4.1.850.1.3.3.6.8.46 | ||||||||||||||||||||
node · current Load 46 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff47 | 1.3.6.1.4.1.850.1.3.3.6.8.47 | ||||||||||||||||||||
node · current Load 47 is off. | |||||||||||||||||||||
| NtlpAtsAlarmLoadOff48 | 1.3.6.1.4.1.850.1.3.3.6.8.48 | ||||||||||||||||||||
node · current Load 48 is off. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen | 1.3.6.1.4.1.850.1.3.3.6.9 | ||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen01 | 1.3.6.1.4.1.850.1.3.3.6.9.1 | ||||||||||||||||||||
node · current Circuit breaker 1 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen02 | 1.3.6.1.4.1.850.1.3.3.6.9.2 | ||||||||||||||||||||
node · current Circuit breaker 2 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen03 | 1.3.6.1.4.1.850.1.3.3.6.9.3 | ||||||||||||||||||||
node · current Circuit breaker 3 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen04 | 1.3.6.1.4.1.850.1.3.3.6.9.4 | ||||||||||||||||||||
node · current Circuit breaker 4 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen05 | 1.3.6.1.4.1.850.1.3.3.6.9.5 | ||||||||||||||||||||
node · current Circuit breaker 5 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCircuitBreakerOpen06 | 1.3.6.1.4.1.850.1.3.3.6.9.6 | ||||||||||||||||||||
node · current Circuit breaker 6 is open. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold | 1.3.6.1.4.1.850.1.3.3.6.10 | ||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold1 | 1.3.6.1.4.1.850.1.3.3.6.10.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold2 | 1.3.6.1.4.1.850.1.3.3.6.10.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold3 | 1.3.6.1.4.1.850.1.3.3.6.10.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold4 | 1.3.6.1.4.1.850.1.3.3.6.10.4 | ||||||||||||||||||||
node · current The output current on l1-n exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold5 | 1.3.6.1.4.1.850.1.3.3.6.10.5 | ||||||||||||||||||||
node · current The output current on l2-n exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentAboveThreshold6 | 1.3.6.1.4.1.850.1.3.3.6.10.6 | ||||||||||||||||||||
node · current The output current on l3-n exceeds load limits. | |||||||||||||||||||||
| NtlpAtsAlarmLoadsNotAllOn | 1.3.6.1.4.1.850.1.3.3.6.11 | ||||||||||||||||||||
node · current One of more loads are not on. | |||||||||||||||||||||
| NtlpAtsAlarmGeneralFault | 1.3.6.1.4.1.850.1.3.3.6.12 | ||||||||||||||||||||
node · current A general fault in the ats has been detected. | |||||||||||||||||||||
| NtlpAtsAlarmVoltage | 1.3.6.1.4.1.850.1.3.3.6.13 | ||||||||||||||||||||
| NtlpAtsAlarmOverVoltage | 1.3.6.1.4.1.850.1.3.3.6.13.1 | ||||||||||||||||||||
node · current The input voltage is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmSource1OverVoltage | 1.3.6.1.4.1.850.1.3.3.6.13.2 | ||||||||||||||||||||
node · current The voltage on source 1 is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmSource2OverVoltage | 1.3.6.1.4.1.850.1.3.3.6.13.3 | ||||||||||||||||||||
node · current The voltage on source 2 is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmFrequency | 1.3.6.1.4.1.850.1.3.3.6.14 | ||||||||||||||||||||
| NtlpAtsAlarmSource1InvalidFrequency | 1.3.6.1.4.1.850.1.3.3.6.14.1 | ||||||||||||||||||||
node · current The voltage on source 1 is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmSource2InvalidFrequency | 1.3.6.1.4.1.850.1.3.3.6.14.2 | ||||||||||||||||||||
node · current The voltage on source 2 is out of tolerance. | |||||||||||||||||||||
| NtlpAtsAlarmLoadLevelBelowThreshold | 1.3.6.1.4.1.850.1.3.3.6.15 | ||||||||||||||||||||
node · current The load level is below the designated threshold. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold | 1.3.6.1.4.1.850.1.3.3.6.16 | ||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold1 | 1.3.6.1.4.1.850.1.3.3.6.16.1 | ||||||||||||||||||||
node · current The output current on phase 1 or l1-l2 is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold2 | 1.3.6.1.4.1.850.1.3.3.6.16.2 | ||||||||||||||||||||
node · current The output current on phase 2 or l2-l3 is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold3 | 1.3.6.1.4.1.850.1.3.3.6.16.3 | ||||||||||||||||||||
node · current The output current on phase 3 or l3-l1 is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold4 | 1.3.6.1.4.1.850.1.3.3.6.16.4 | ||||||||||||||||||||
node · current The output current on l1-n is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold5 | 1.3.6.1.4.1.850.1.3.3.6.16.5 | ||||||||||||||||||||
node · current The output current on l2-n is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmCurrentBelowThreshold6 | 1.3.6.1.4.1.850.1.3.3.6.16.6 | ||||||||||||||||||||
node · current The output current on l3-n is below load limits. | |||||||||||||||||||||
| NtlpAtsAlarmThdOutOfRange | 1.3.6.1.4.1.850.1.3.3.6.17 | ||||||||||||||||||||
node · current The thd value is out of range. | |||||||||||||||||||||
| NtlpAtsAlarmOutletOverCurrent | 1.3.6.1.4.1.850.1.3.3.6.18 | ||||||||||||||||||||
node · current One or more outlets is above load limits. | |||||||||||||||||||||
| NtlpCoolingAlarms | 1.3.6.1.4.1.850.1.3.3.7 | ||||||||||||||||||||
| NtlpCoolingAlarmSupplyAirSensorFault | 1.3.6.1.4.1.850.1.3.3.7.1 | ||||||||||||||||||||
node · current The supply air sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmReturnAirSensorFault | 1.3.6.1.4.1.850.1.3.3.7.2 | ||||||||||||||||||||
node · current The return air sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmCondenserInletAirSensorFault | 1.3.6.1.4.1.850.1.3.3.7.3 | ||||||||||||||||||||
node · current The condenser inlet air sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmCondenserOutletAirSensorFault | 1.3.6.1.4.1.850.1.3.3.7.4 | ||||||||||||||||||||
node · current The condenser outlet air sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmSuctionTemperatureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.5 | ||||||||||||||||||||
node · current The suction temperature sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmEvaporatorTemperatureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.6 | ||||||||||||||||||||
node · current The evaporator temperature sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmAirFilterClogged | 1.3.6.1.4.1.850.1.3.3.7.7 | ||||||||||||||||||||
node · current The air filter is clogged. | |||||||||||||||||||||
| NtlpCoolingAlarmAirFilterRunHoursViolation | 1.3.6.1.4.1.850.1.3.3.7.8 | ||||||||||||||||||||
node · current The air filter run hours was violated. | |||||||||||||||||||||
| NtlpCoolingAlarmSuctionPressureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.9 | ||||||||||||||||||||
node · current The suction pressure sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmInverterCommunicationsFault | 1.3.6.1.4.1.850.1.3.3.7.10 | ||||||||||||||||||||
node · current The inverter communications is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmRemoteShutdownViaInputContact | 1.3.6.1.4.1.850.1.3.3.7.11 | ||||||||||||||||||||
node · current A remote shutdown was triggered by an input contact. | |||||||||||||||||||||
| NtlpCoolingAlarmCondensatePumpFault | 1.3.6.1.4.1.850.1.3.3.7.12 | ||||||||||||||||||||
node · current The condensate pump is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmLowRefrigerantStartupFault | 1.3.6.1.4.1.850.1.3.3.7.13 | ||||||||||||||||||||
node · current The low refrigerant startup is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmCondenserFanFault | 1.3.6.1.4.1.850.1.3.3.7.14 | ||||||||||||||||||||
node · current The condenser fan is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmCondenserFailure | 1.3.6.1.4.1.850.1.3.3.7.15 | ||||||||||||||||||||
node · current The condenser has failed. | |||||||||||||||||||||
| NtlpCoolingAlarmEvaporatorCoolingFailure | 1.3.6.1.4.1.850.1.3.3.7.16 | ||||||||||||||||||||
node · current The evaporator cooling is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmReturnAirTempHigh | 1.3.6.1.4.1.850.1.3.3.7.17 | ||||||||||||||||||||
node · current The return air temperature is high. | |||||||||||||||||||||
| NtlpCoolingAlarmSupplyAirTempHigh | 1.3.6.1.4.1.850.1.3.3.7.18 | ||||||||||||||||||||
node · current The supply air temperature is high. | |||||||||||||||||||||
| NtlpCoolingAlarmEvaporatorFailure | 1.3.6.1.4.1.850.1.3.3.7.19 | ||||||||||||||||||||
node · current The evaporator has failed. | |||||||||||||||||||||
| NtlpCoolingAlarmEvaporatorFreezeUp | 1.3.6.1.4.1.850.1.3.3.7.20 | ||||||||||||||||||||
node · current The evaporator is frozen. | |||||||||||||||||||||
| NtlpCoolingAlarmDischargePressureHigh | 1.3.6.1.4.1.850.1.3.3.7.21 | ||||||||||||||||||||
node · current The discharge pressure is high. | |||||||||||||||||||||
| NtlpCoolingAlarmPressureGaugeFailure | 1.3.6.1.4.1.850.1.3.3.7.22 | ||||||||||||||||||||
node · current The pressure gauge has failed. | |||||||||||||||||||||
| NtlpCoolingAlarmDischargePressurePersistentHigh | 1.3.6.1.4.1.850.1.3.3.7.23 | ||||||||||||||||||||
node · current The discharge pressure is persistently high. | |||||||||||||||||||||
| NtlpCoolingAlarmSuctionPressureLowStartFailure | 1.3.6.1.4.1.850.1.3.3.7.24 | ||||||||||||||||||||
node · current Cannot start due to low suction pressure. | |||||||||||||||||||||
| NtlpCoolingAlarmSuctionPressureLow | 1.3.6.1.4.1.850.1.3.3.7.25 | ||||||||||||||||||||
node · current The suction pressure is low. | |||||||||||||||||||||
| NtlpCoolingAlarmSuctionPressurePersistentLow | 1.3.6.1.4.1.850.1.3.3.7.26 | ||||||||||||||||||||
node · current The suction pressure is persistently low. | |||||||||||||||||||||
| NtlpCoolingAlarmStartupLinePressureImbalance | 1.3.6.1.4.1.850.1.3.3.7.27 | ||||||||||||||||||||
node · current The startup line pressure is in imbalance. | |||||||||||||||||||||
| NtlpCoolingAlarmCompressorFailure | 1.3.6.1.4.1.850.1.3.3.7.28 | ||||||||||||||||||||
node · current The compressor has failed. | |||||||||||||||||||||
| NtlpCoolingAlarmCurrentLimit | 1.3.6.1.4.1.850.1.3.3.7.29 | ||||||||||||||||||||
node · current The current is out of range. | |||||||||||||||||||||
| NtlpCoolingAlarmWaterLeak | 1.3.6.1.4.1.850.1.3.3.7.30 | ||||||||||||||||||||
node · current Water is leaking. | |||||||||||||||||||||
| NtlpCoolingAlarmFanUnderCurrent | 1.3.6.1.4.1.850.1.3.3.7.31 | ||||||||||||||||||||
node · current The fan is under current. | |||||||||||||||||||||
| NtlpCoolingAlarmFanOverCurrent | 1.3.6.1.4.1.850.1.3.3.7.32 | ||||||||||||||||||||
node · current The fan is over current. | |||||||||||||||||||||
| NtlpCoolingAlarmDischargePressureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.33 | ||||||||||||||||||||
node · current The discharge pressure sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmWaterFull | 1.3.6.1.4.1.850.1.3.3.7.34 | ||||||||||||||||||||
node · current Water is Full. | |||||||||||||||||||||
| NtlpCoolingAlarmAutoCoolingOn | 1.3.6.1.4.1.850.1.3.3.7.35 | ||||||||||||||||||||
node · current Automatic cooling was activated to lower the temperature below the remote set point. | |||||||||||||||||||||
| NtlpCoolingAlarmPowerButtonPressed | 1.3.6.1.4.1.850.1.3.3.7.36 | ||||||||||||||||||||
node · current Power button was pressed on the front panel. | |||||||||||||||||||||
| NtlpCoolingAlarmDisconnectedFromDevice | 1.3.6.1.4.1.850.1.3.3.7.37 | ||||||||||||||||||||
node · current The device communications is disconnected. | |||||||||||||||||||||
| NtlpCoolingAlarmReturnAirTemperatureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.38 | ||||||||||||||||||||
node · current Ambient (return air) temperature sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmRemoteTemperatureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.39 | ||||||||||||||||||||
node · current Remote temperature sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmLowPressureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.40 | ||||||||||||||||||||
node · current Low pressure sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmHighPressureSensorFault | 1.3.6.1.4.1.850.1.3.3.7.41 | ||||||||||||||||||||
node · current High pressure sensor is in fault. | |||||||||||||||||||||
| NtlpCoolingAlarmSentrytimerTimeout | 1.3.6.1.4.1.850.1.3.3.7.42 | ||||||||||||||||||||
node · current Sentry timer time out. | |||||||||||||||||||||
| NtlpKvmAlarms | 1.3.6.1.4.1.850.1.3.3.8 | ||||||||||||||||||||
| NtlpRackTrackAlarms | 1.3.6.1.4.1.850.1.3.3.9 | ||||||||||||||||||||
| NtlpSwitchAlarms | 1.3.6.1.4.1.850.1.3.3.10 | ||||||||||||||||||||
| NtlpAlarmControl | 1.3.6.1.4.1.850.1.3.4 | ||||||||||||||||||||
| TtlpAlarmControlTable | 1.3.6.1.4.1.850.1.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of alarm conditions supported for each device managed by this agent. This table contains zero, one, or many rows depending upon the number of available alarms managed by each device. | |||||||||||||||||||||
| RtlpAlarmControlEntry | 1.3.6.1.4.1.850.1.3.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing details for a particular alarm condition. | |||||||||||||||||||||
| CtlpAlarmControlIndex | 1.3.6.1.4.1.850.1.3.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The table row index for this alarm control entry for this device. The index of any one row represents the index of the alarm entry within the agent system. As such, the index values for any one device is not guaranteed to start with 1 or be numerically sequential. | |||||||||||||||||||||
| CtlpAlarmControlDescr | 1.3.6.1.4.1.850.1.3.4.1.1.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current A reference of the alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description for the alarm condition. The object referenced will be a well known alarm object associated with the device on which the alarm condition is active. This will be the same object description of an alarm when in alarm as referenced by tlpAlarmDescr. | |||||||||||||||||||||
| CtlpAlarmControlDetail | 1.3.6.1.4.1.850.1.3.4.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A textual description of the alarm condition. This will be the same textual description of an alarm when in alarm as referenced by tlpAlarmDetail. | |||||||||||||||||||||
| CtlpAlarmControlSeverity | 1.3.6.1.4.1.850.1.3.4.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The severity of this alarm, which can be configured as desired for each alarm condition. This will be the same severity used when in alarm as referenced by tlpAlarmType.
| |||||||||||||||||||||
| NtlpNotify | 1.3.6.1.4.1.850.1.4 | ||||||||||||||||||||
| NtlpNotifications | 1.3.6.1.4.1.850.1.4.1 | ||||||||||||||||||||
| !tlpNotificationsAlarmEntryAdded | 1.3.6.1.4.1.850.1.4.1.1 | ||||||||||||||||||||
notification · current This notification is sent each time an alarm condition is inserted into the device alarm table, tlpAlarmTable. | |||||||||||||||||||||
| !tlpNotificationsAlarmEntryRemoved | 1.3.6.1.4.1.850.1.4.1.2 | ||||||||||||||||||||
notification · current This notification is sent each time an alarm condition is removed from the device alarm table, tlpAlarmTable. | |||||||||||||||||||||
| !tlpNotifySystemStartup | 1.3.6.1.4.1.850.1.4.1.3 | ||||||||||||||||||||
notification · current Used to inform another entity of an agent's startup. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceIdentProtocol, indexed by device Obj11Value= The device's protocol (display string format) | |||||||||||||||||||||
| !tlpNotifySystemShutdown | 1.3.6.1.4.1.850.1.4.1.4 | ||||||||||||||||||||
notification · current Used to inform another entity of an agent's shutdown. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceIdentProtocol, indexed by device Obj11Value= The device's protocol (display string format) | |||||||||||||||||||||
| !tlpNotifySystemUpdate | 1.3.6.1.4.1.850.1.4.1.5 | ||||||||||||||||||||
notification · current Used to inform another entity of an engine's startup. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceIdentProtocol, indexed by device Obj11Value= The device's protocol (display string format) | |||||||||||||||||||||
| !tlpNotifyTest | 1.3.6.1.4.1.850.1.4.1.6 | ||||||||||||||||||||
notification · current Used when performing a test of the system or an alert notification contact. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] | |||||||||||||||||||||
| NtlpNotificationsEvent | 1.3.6.1.4.1.850.1.4.2 | ||||||||||||||||||||
| NtlpNotificationsAgent | 1.3.6.1.4.1.850.1.4.2.1 | ||||||||||||||||||||
| NtlpNotificationsDevice | 1.3.6.1.4.1.850.1.4.2.2 | ||||||||||||||||||||
| !tlpNotificationsDeviceInternalFirmwareFault | 1.3.6.1.4.1.850.1.4.2.2.1 | ||||||||||||||||||||
notification · current This notification is sent when the device experiences an internal firmware failure. | |||||||||||||||||||||
| !tlpNotificationsDeviceInternalHardwareFault | 1.3.6.1.4.1.850.1.4.2.2.2 | ||||||||||||||||||||
notification · current This notification is sent when the device experiences an internal hardware failure. | |||||||||||||||||||||
| !tlpNotificationsDeviceConfigurationChange | 1.3.6.1.4.1.850.1.4.2.2.3 | ||||||||||||||||||||
notification · current This notification is sent when the device configuration changes. | |||||||||||||||||||||
| !tlpNotificationsDeviceFirmwareUpdate | 1.3.6.1.4.1.850.1.4.2.2.4 | ||||||||||||||||||||
notification · current This notification is sent when the device firmware is updated. | |||||||||||||||||||||
| !tlpNotificationsDeviceMicrocontrollerReset | 1.3.6.1.4.1.850.1.4.2.2.5 | ||||||||||||||||||||
notification · current This notification is sent when the device microcontroller resets. | |||||||||||||||||||||
| !tlpNotificationsDeviceSystemInformation | 1.3.6.1.4.1.850.1.4.2.2.6 | ||||||||||||||||||||
notification · current This notification is sent when the device system information changes. | |||||||||||||||||||||
| !tlpNotificationsDeviceNvrChecksumMismatch | 1.3.6.1.4.1.850.1.4.2.2.7 | ||||||||||||||||||||
notification · current This notification is sent when the NVR is corrupted. | |||||||||||||||||||||
| !tlpNotificationsDeviceUsbCommunicationsEstablished | 1.3.6.1.4.1.850.1.4.2.2.8 | ||||||||||||||||||||
notification · current This notification is sent when the device USB communications is established. | |||||||||||||||||||||
| !tlpNotificationsDeviceUsbCommunicationsLost | 1.3.6.1.4.1.850.1.4.2.2.9 | ||||||||||||||||||||
notification · current This notification is sent when the device USB communications is lost. | |||||||||||||||||||||
| !tlpNotificationsDevicePowerSupplyShutdown | 1.3.6.1.4.1.850.1.4.2.2.10 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to a power supply fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceOverLoadShutdown | 1.3.6.1.4.1.850.1.4.2.2.11 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to an over load fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceCurrentLimitShutdown | 1.3.6.1.4.1.850.1.4.2.2.12 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to a current limit fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceOverTemperatureShutdown | 1.3.6.1.4.1.850.1.4.2.2.13 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to an over temperature fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceModeTransitionTimeout | 1.3.6.1.4.1.850.1.4.2.2.14 | ||||||||||||||||||||
notification · current This notification is sent when the device timed out transitioning to a mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceFailedModeTransitionToIdle | 1.3.6.1.4.1.850.1.4.2.2.15 | ||||||||||||||||||||
notification · current This notification is sent when the device failed a transition to idle mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceInternalCommunicationsLost | 1.3.6.1.4.1.850.1.4.2.2.16 | ||||||||||||||||||||
notification · current This notification is sent when the device lost internal communications. | |||||||||||||||||||||
| !tlpNotificationsDeviceAcknowledgeFaults | 1.3.6.1.4.1.850.1.4.2.2.17 | ||||||||||||||||||||
notification · current This notification is sent when device faults are acknowledged. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToRestart | 1.3.6.1.4.1.850.1.4.2.2.18 | ||||||||||||||||||||
notification · current This notification is sent when a device restart occurred. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToWatchdogRestart | 1.3.6.1.4.1.850.1.4.2.2.19 | ||||||||||||||||||||
notification · current This notification is sent when a device restart occurred due to a watchdog fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToLatchedIdle | 1.3.6.1.4.1.850.1.4.2.2.20 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to latched idle mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToLatchedStandby | 1.3.6.1.4.1.850.1.4.2.2.21 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to latched standby mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToLatchedLine | 1.3.6.1.4.1.850.1.4.2.2.22 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to latched line mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceFailSafeClockMonitorEngaged | 1.3.6.1.4.1.850.1.4.2.2.23 | ||||||||||||||||||||
notification · current This notification is sent when the fail safe clock monitor is engaged. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToIdle | 1.3.6.1.4.1.850.1.4.2.2.24 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to idle mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceVoutUnderVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.2.25 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to an under voltage fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceVoutOverVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.2.26 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to an over voltage fault. | |||||||||||||||||||||
| !tlpNotificationsDeviceRtosFault | 1.3.6.1.4.1.850.1.4.2.2.27 | ||||||||||||||||||||
notification · current This notification is sent when an RTOS fault occurs. | |||||||||||||||||||||
| !tlpNotificationsDeviceCriticalNvrValuesBlank | 1.3.6.1.4.1.850.1.4.2.2.28 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a blank critical nvr value. | |||||||||||||||||||||
| !tlpNotificationsDeviceOutputOff | 1.3.6.1.4.1.850.1.4.2.2.29 | ||||||||||||||||||||
notification · current This notification is sent when the device output is off. | |||||||||||||||||||||
| !tlpNotificationsDeviceStartup | 1.3.6.1.4.1.850.1.4.2.2.30 | ||||||||||||||||||||
notification · current This notification is sent when the device starts powering up. | |||||||||||||||||||||
| !tlpNotificationsDeviceEpo | 1.3.6.1.4.1.850.1.4.2.2.31 | ||||||||||||||||||||
notification · current This notification is sent when an emergency power off occurs on the device. | |||||||||||||||||||||
| !tlpNotificationsDeviceFirmwareMismatch | 1.3.6.1.4.1.850.1.4.2.2.32 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a firmware mismatch. | |||||||||||||||||||||
| !tlpNotificationsDeviceOverloadRelease | 1.3.6.1.4.1.850.1.4.2.2.33 | ||||||||||||||||||||
notification · current This notification is sent when an overload condition is released. | |||||||||||||||||||||
| !tlpNotificationsDeviceTransferToLine | 1.3.6.1.4.1.850.1.4.2.2.34 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to line mode. | |||||||||||||||||||||
| !tlpNotificationsDeviceAcFailure | 1.3.6.1.4.1.850.1.4.2.2.35 | ||||||||||||||||||||
notification · current This notification is sent when power to the device failed. | |||||||||||||||||||||
| !tlpNotificationsDeviceSiteWiringFault | 1.3.6.1.4.1.850.1.4.2.2.36 | ||||||||||||||||||||
notification · current This notification is sent when the utility input wiring is faulty. | |||||||||||||||||||||
| !tlpNotificationsDeviceEmergencyShutdown | 1.3.6.1.4.1.850.1.4.2.2.37 | ||||||||||||||||||||
notification · current This notification is sent when the device reports an emergency shutdown. | |||||||||||||||||||||
| !tlpNotificationsDeviceCircuitBreakerOpen | 1.3.6.1.4.1.850.1.4.2.2.38 | ||||||||||||||||||||
notification · current This notification is sent when a circuit breaker is open. | |||||||||||||||||||||
| !tlpNotificationsDeviceSupplyMonitorInterrupt | 1.3.6.1.4.1.850.1.4.2.2.39 | ||||||||||||||||||||
notification · current This notification is sent when a supply monitor interrupt fault is reported. | |||||||||||||||||||||
| !tlpNotificationsDeviceSystemTickTimeout | 1.3.6.1.4.1.850.1.4.2.2.40 | ||||||||||||||||||||
notification · current This notification is sent when a system tick timeout occurs. | |||||||||||||||||||||
| !tlpNotificationsDeviceRelayInUnexpectedState | 1.3.6.1.4.1.850.1.4.2.2.41 | ||||||||||||||||||||
notification · current This notification is sent when a relay is in an unexpected state. | |||||||||||||||||||||
| !tlpNotificationsDeviceEepromQueueOverflow | 1.3.6.1.4.1.850.1.4.2.2.42 | ||||||||||||||||||||
notification · current This notification is sent when an EEPROM queue overflow fault occurs. | |||||||||||||||||||||
| !tlpNotificationsDeviceEepromWriteFault | 1.3.6.1.4.1.850.1.4.2.2.43 | ||||||||||||||||||||
notification · current This notification is sent when an EEPROM write fault occurs. | |||||||||||||||||||||
| !tlpNotificationsDeviceEepromOperationTimeout | 1.3.6.1.4.1.850.1.4.2.2.44 | ||||||||||||||||||||
notification · current This notification is sent when an EEPROM operation timeout occurs. | |||||||||||||||||||||
| !tlpNotificationsDeviceI2cWriteDelayed | 1.3.6.1.4.1.850.1.4.2.2.45 | ||||||||||||||||||||
notification · current This notification is sent when a delay occurred writing to the I2C. | |||||||||||||||||||||
| !tlpNotificationsDeviceRampShedNvrWriteFailed | 1.3.6.1.4.1.850.1.4.2.2.46 | ||||||||||||||||||||
notification · current This notification is sent when ramp/shed nvr write failed. | |||||||||||||||||||||
| !tlpNotificationsDeviceFactoryRestoreFault | 1.3.6.1.4.1.850.1.4.2.2.47 | ||||||||||||||||||||
notification · current This notification is sent when a fault occurred during a factory restore. | |||||||||||||||||||||
| !tlpNotificationsDeviceRelaySetTimeOutOfRange | 1.3.6.1.4.1.850.1.4.2.2.48 | ||||||||||||||||||||
notification · current This notification is sent when a relay set time is out of range. | |||||||||||||||||||||
| !tlpNotificationsDeviceRelayResetTimeOutOfRange | 1.3.6.1.4.1.850.1.4.2.2.49 | ||||||||||||||||||||
notification · current This notification is sent when a relay reset time is out of range. | |||||||||||||||||||||
| NtlpNotificationsUps | 1.3.6.1.4.1.850.1.4.2.3 | ||||||||||||||||||||
| !tlpNotificationsUpsBatteryLowVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.3.1 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to a low battery voltage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryLowPercentageShutdown | 1.3.6.1.4.1.850.1.4.2.3.2 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to a low battery percentage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryOverVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.3.3 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to a battery over voltage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryOverCurrentShutdown | 1.3.6.1.4.1.850.1.4.2.3.4 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to a battery over current fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryUnknownTypeShutdown | 1.3.6.1.4.1.850.1.4.2.3.5 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to an unknown battery type fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryConfigurationMismatch | 1.3.6.1.4.1.850.1.4.2.3.6 | ||||||||||||||||||||
notification · current This notification is sent when the ups battery configuration is mismatched. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryUnderVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.3.7 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to a battery under voltage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsSlaBatteryOverTemperatureShutdown | 1.3.6.1.4.1.850.1.4.2.3.8 | ||||||||||||||||||||
notification · current This notification is sent when the ups reports a shutdown occurred due to an SLA battery over temperature fault. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryInstallation | 1.3.6.1.4.1.850.1.4.2.3.9 | ||||||||||||||||||||
notification · current This notification is sent when a battery installation occurs. | |||||||||||||||||||||
| !tlpNotificationsUpsChargerBulkToAcceptance | 1.3.6.1.4.1.850.1.4.2.3.10 | ||||||||||||||||||||
notification · current This notification is sent when ups battery charging. | |||||||||||||||||||||
| !tlpNotificationsUpsChargerAcceptanceToFloat | 1.3.6.1.4.1.850.1.4.2.3.11 | ||||||||||||||||||||
notification · current This notification is sent when ups battery fully charged. | |||||||||||||||||||||
| !tlpNotificationsUpsChargerFloatToBulk | 1.3.6.1.4.1.850.1.4.2.3.12 | ||||||||||||||||||||
notification · current This notification is sent when ups battery not fully charged. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToSelftest | 1.3.6.1.4.1.850.1.4.2.3.13 | ||||||||||||||||||||
notification · current This notification is sent when a self test is initiated. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToEconomy | 1.3.6.1.4.1.850.1.4.2.3.14 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to economy mode. | |||||||||||||||||||||
| !tlpNotificationsUpsLineConnectRelayFaultShutdown | 1.3.6.1.4.1.850.1.4.2.3.15 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to line connect relay fault. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToFaultBypass | 1.3.6.1.4.1.850.1.4.2.3.16 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to fault bypass mode. | |||||||||||||||||||||
| !tlpNotificationsUpsBypassPowerDistributionModuleDisconnected | 1.3.6.1.4.1.850.1.4.2.3.17 | ||||||||||||||||||||
notification · current This notification is sent when bypass power distribution module is disconnected. | |||||||||||||||||||||
| !tlpNotificationsUpsManualBypassActivatedFromUnsupportedMode | 1.3.6.1.4.1.850.1.4.2.3.18 | ||||||||||||||||||||
notification · current This notification is sent when manual bypass activated from an unsupported ups mode. | |||||||||||||||||||||
| !tlpNotificationsUpsOnBatteryTimeoutShutdown | 1.3.6.1.4.1.850.1.4.2.3.19 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to on battery timeout. | |||||||||||||||||||||
| !tlpNotificationsUpsLowBatteryPercentageShutdown | 1.3.6.1.4.1.850.1.4.2.3.20 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to low battery percentage. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryCommunicationsLost | 1.3.6.1.4.1.850.1.4.2.3.21 | ||||||||||||||||||||
notification · current This notification is sent when communications with the battery pack is lost. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryCommunicationsEstablished | 1.3.6.1.4.1.850.1.4.2.3.22 | ||||||||||||||||||||
notification · current This notification is sent when communications with the battery pack is established. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryOtaShutdown | 1.3.6.1.4.1.850.1.4.2.3.23 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the battery ota flag. | |||||||||||||||||||||
| !tlpNotificationsUpsCartInstallation | 1.3.6.1.4.1.850.1.4.2.3.24 | ||||||||||||||||||||
notification · current This notification is sent when the device reports the occurrence of a cart installation. | |||||||||||||||||||||
| !tlpNotificationsUpsDeadBatteryRecoveryShutdown | 1.3.6.1.4.1.850.1.4.2.3.25 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to a dead battery. | |||||||||||||||||||||
| !tlpNotificationsUpsFullBridgeNotSteadyShutdown | 1.3.6.1.4.1.850.1.4.2.3.26 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the full bridge not steady. | |||||||||||||||||||||
| !tlpNotificationsUpsFullBridgeCurrentLimitShutdown | 1.3.6.1.4.1.850.1.4.2.3.27 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to a current limit on the full bridge. | |||||||||||||||||||||
| !tlpNotificationsUpsTransitionFailed | 1.3.6.1.4.1.850.1.4.2.3.28 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a failure to transition. | |||||||||||||||||||||
| !tlpNotificationsUpsInverterOcp | 1.3.6.1.4.1.850.1.4.2.3.29 | ||||||||||||||||||||
notification · current This notification is sent when the device reports an inverter ocp fault. | |||||||||||||||||||||
| !tlpNotificationsUpsInverterVbusShutdown | 1.3.6.1.4.1.850.1.4.2.3.30 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the inverter vbus. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToFaultStandby | 1.3.6.1.4.1.850.1.4.2.3.31 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to a fault standby mode. | |||||||||||||||||||||
| !tlpNotificationsUpsModbusBatteryStatusShutdown | 1.3.6.1.4.1.850.1.4.2.3.32 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the modbus battery status. | |||||||||||||||||||||
| !tlpNotificationsUpsBatteryPackCountChange | 1.3.6.1.4.1.850.1.4.2.3.33 | ||||||||||||||||||||
notification · current This notification is sent when the number of battery packs changed. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToBattery | 1.3.6.1.4.1.850.1.4.2.3.34 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to battery mode. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToBypass | 1.3.6.1.4.1.850.1.4.2.3.35 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to bypass mode. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToDbrLine | 1.3.6.1.4.1.850.1.4.2.3.36 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to dbr line mode. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToDbrStandby | 1.3.6.1.4.1.850.1.4.2.3.37 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to dbr standby mode. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToStandby | 1.3.6.1.4.1.850.1.4.2.3.38 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to standby mode. | |||||||||||||||||||||
| !tlpNotificationsUpsTransferToOnline | 1.3.6.1.4.1.850.1.4.2.3.39 | ||||||||||||||||||||
notification · current This notification is sent when the device transferred to online mode. | |||||||||||||||||||||
| !tlpNotificationsUpsV20BusNotSteadyShutdown | 1.3.6.1.4.1.850.1.4.2.3.40 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the v20 bus not steady. | |||||||||||||||||||||
| !tlpNotificationsUpsV20BusOverVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.3.41 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the v20 bus over voltage. | |||||||||||||||||||||
| !tlpNotificationsUpsV20BusUnderVoltageShutdown | 1.3.6.1.4.1.850.1.4.2.3.42 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to the v20 bus under voltage. | |||||||||||||||||||||
| !tlpNotificationsUpsBypassOutOfRange | 1.3.6.1.4.1.850.1.4.2.3.43 | ||||||||||||||||||||
notification · current This notification is sent when the bypass voltage is out of tolerance. | |||||||||||||||||||||
| !tlpNotificationsUpsEnergySavingShutdown | 1.3.6.1.4.1.850.1.4.2.3.44 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to energy saving. | |||||||||||||||||||||
| !tlpNotificationsUpsDryContactShutdown | 1.3.6.1.4.1.850.1.4.2.3.45 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to a dry contact. | |||||||||||||||||||||
| !tlpNotificationsUpsInverterOverCurrentShutdown | 1.3.6.1.4.1.850.1.4.2.3.46 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a shutdown occurred due to an inverter over current fault. | |||||||||||||||||||||
| !tlpNotificationsUpsPfcPrechargeFault | 1.3.6.1.4.1.850.1.4.2.3.47 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a PFC precharge fault. | |||||||||||||||||||||
| !tlpNotificationsUpsPfcOverVoltageFault | 1.3.6.1.4.1.850.1.4.2.3.48 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a PFC over voltage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsPfcUnderVoltageFault | 1.3.6.1.4.1.850.1.4.2.3.49 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a PFC under voltage fault. | |||||||||||||||||||||
| !tlpNotificationsUpsPfcOverCurrentFault | 1.3.6.1.4.1.850.1.4.2.3.50 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a PFC over current fault. | |||||||||||||||||||||
| NtlpNotificationsPdu | 1.3.6.1.4.1.850.1.4.2.4 | ||||||||||||||||||||
| !tlpNotificationsPduCrestFactorOutOfRange | 1.3.6.1.4.1.850.1.4.2.4.1 | ||||||||||||||||||||
notification · current This notification is sent when the crest factor is beyond normal operating limits. | |||||||||||||||||||||
| !tlpNotificationsPduTransferToForceLineMode | 1.3.6.1.4.1.850.1.4.2.4.2 | ||||||||||||||||||||
notification · current This notification is sent when the device is forced into line mode. | |||||||||||||||||||||
| !tlpNotificationsPduLineInRange | 1.3.6.1.4.1.850.1.4.2.4.3 | ||||||||||||||||||||
notification · current This notification is sent when the line enters into normal operating range. | |||||||||||||||||||||
| !tlpNotificationsPduLineOutOfRange | 1.3.6.1.4.1.850.1.4.2.4.4 | ||||||||||||||||||||
notification · current This notification is sent when the line falls outside its normal operating range. | |||||||||||||||||||||
| !tlpNotificationsPduNotableRelayResponseTimes | 1.3.6.1.4.1.850.1.4.2.4.5 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a notable relay response time. | |||||||||||||||||||||
| !tlpNotificationsPduOutletNearMaxRating | 1.3.6.1.4.1.850.1.4.2.4.6 | ||||||||||||||||||||
notification · current This notification is sent when the device reports an outlet is near its maximum rating. | |||||||||||||||||||||
| !tlpNotificationsPduLineModeTransferToLinePartialPowerup | 1.3.6.1.4.1.850.1.4.2.4.7 | ||||||||||||||||||||
notification · current This notification is sent when the device reports a partial powerup in line mode. | |||||||||||||||||||||
| !tlpNotificationsPduSinglePhasing | 1.3.6.1.4.1.850.1.4.2.4.8 | ||||||||||||||||||||
notification · current This notification is sent when the device reports it is operating with only a single phase. | |||||||||||||||||||||
| NtlpNotificationsEnvirosense | 1.3.6.1.4.1.850.1.4.2.5 | ||||||||||||||||||||
| NtlpNotificationsAts | 1.3.6.1.4.1.850.1.4.2.6 | ||||||||||||||||||||
| !tlpNotificationsAtsSource1NotAvailable | 1.3.6.1.4.1.850.1.4.2.6.1 | ||||||||||||||||||||
notification · current This notification is sent when input on source one is not available. For atss with the designation of primary and secondary, this notification denotes input on the primary source is not available. | |||||||||||||||||||||
| !tlpNotificationsAtsSource2NotAvailable | 1.3.6.1.4.1.850.1.4.2.6.2 | ||||||||||||||||||||
notification · current This notification is sent when input on source two is not available. For atss with the designation of primary and secondary, this notification denotes input on the secondary source is not available. | |||||||||||||||||||||
| !tlpNotificationsAtsLockdownToSource1 | 1.3.6.1.4.1.850.1.4.2.6.3 | ||||||||||||||||||||
notification · current This notification is sent upon a transfer circuit fault causing the device to be locked on source 1. | |||||||||||||||||||||
| !tlpNotificationsAtsLockdownToSource2 | 1.3.6.1.4.1.850.1.4.2.6.4 | ||||||||||||||||||||
notification · current This notification is sent upon a transfer circuit fault causing the device to be locked on source 2. | |||||||||||||||||||||
| !tlpNotificationsAtsSource1Available | 1.3.6.1.4.1.850.1.4.2.6.5 | ||||||||||||||||||||
notification · current This notification is sent when source 1 is available and ready for use. | |||||||||||||||||||||
| !tlpNotificationsAtsSource2Available | 1.3.6.1.4.1.850.1.4.2.6.6 | ||||||||||||||||||||
notification · current This notification is sent when source 2 is available and ready for use. | |||||||||||||||||||||
| !tlpNotificationsAtsSource1Brownout | 1.3.6.1.4.1.850.1.4.2.6.7 | ||||||||||||||||||||
notification · current This notification is sent when a brownout condition occurred on source 1. | |||||||||||||||||||||
| !tlpNotificationsAtsSource2Brownout | 1.3.6.1.4.1.850.1.4.2.6.8 | ||||||||||||||||||||
notification · current This notification is sent when a brownout condition occurred on source 2. | |||||||||||||||||||||
| !tlpNotificationsAtsSource1VoltageDrop | 1.3.6.1.4.1.850.1.4.2.6.9 | ||||||||||||||||||||
notification · current This notification is sent when the voltage on source 1 drops below a usable state. | |||||||||||||||||||||
| !tlpNotificationsAtsSource2VoltageDrop | 1.3.6.1.4.1.850.1.4.2.6.10 | ||||||||||||||||||||
notification · current This notification is sent when the voltage on source 2 drops below a usable state. | |||||||||||||||||||||
| !tlpNotificationsAtsTimedReturnToSource1 | 1.3.6.1.4.1.850.1.4.2.6.11 | ||||||||||||||||||||
notification · current This notification is sent when the active input source returns to source 1 from source 2 after a delay time expires. | |||||||||||||||||||||
| !tlpNotificationsAtsTimedReturnToSource2 | 1.3.6.1.4.1.850.1.4.2.6.12 | ||||||||||||||||||||
notification · current This notification is sent when the active input source returns to source 2 from source 1 after a delay time expires. | |||||||||||||||||||||
| !tlpNotificationsAtsTransferToSource1 | 1.3.6.1.4.1.850.1.4.2.6.13 | ||||||||||||||||||||
notification · current This notification is sent when the active input source transfers from source 2 to source 1. | |||||||||||||||||||||
| !tlpNotificationsAtsTransferToSource2 | 1.3.6.1.4.1.850.1.4.2.6.14 | ||||||||||||||||||||
notification · current This notification is sent when the active input source transfers from source 1 to source 2. | |||||||||||||||||||||
| NtlpNotificationsCooling | 1.3.6.1.4.1.850.1.4.2.7 | ||||||||||||||||||||
| NtlpNotificationsKvm | 1.3.6.1.4.1.850.1.4.2.8 | ||||||||||||||||||||
| NtlpNotificationsRackTrack | 1.3.6.1.4.1.850.1.4.2.9 | ||||||||||||||||||||
| NtlpNotificationsSwitch | 1.3.6.1.4.1.850.1.4.2.10 | ||||||||||||||||||||
| NtlpNotificationsEventParameters | 1.3.6.1.4.1.850.1.4.3 | ||||||||||||||||||||
| StlpNotifyEventTableRef | 1.3.6.1.4.1.850.1.4.3.1 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
scalar · OBJECT IDENTIFIER · read-only · current This value references the OID of a table object applicable to the event condition. This, in conjunction with the table row as defined by tlpAlarmTableRowRef, specifies the object/row within this table to which the event condition applies. Refer to tlpAlarmTableRef for more information. | |||||||||||||||||||||
| StlpNotifyEventTableRowRef | 1.3.6.1.4.1.850.1.4.3.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
scalar · OBJECT IDENTIFIER · read-only · current This value is used in conjunction with tlpNotifyEventTableRef to define the object associated with this event condition. See the description of tlpNotifyEventTableRef for more information. | |||||||||||||||||||||
Traps / Notifications
- tlpNotificationsAlarmEntryAdded
1.3.6.1.4.1.850.1.4.1.1 - tlpNotificationsAlarmEntryRemoved
1.3.6.1.4.1.850.1.4.1.2 - tlpNotificationsAtsLockdownToSource1
1.3.6.1.4.1.850.1.4.2.6.3 - tlpNotificationsAtsLockdownToSource2
1.3.6.1.4.1.850.1.4.2.6.4 - tlpNotificationsAtsSource1Available
1.3.6.1.4.1.850.1.4.2.6.5 - tlpNotificationsAtsSource1Brownout
1.3.6.1.4.1.850.1.4.2.6.7 - tlpNotificationsAtsSource1NotAvailable
1.3.6.1.4.1.850.1.4.2.6.1 - tlpNotificationsAtsSource1VoltageDrop
1.3.6.1.4.1.850.1.4.2.6.9 - tlpNotificationsAtsSource2Available
1.3.6.1.4.1.850.1.4.2.6.6 - tlpNotificationsAtsSource2Brownout
1.3.6.1.4.1.850.1.4.2.6.8 - tlpNotificationsAtsSource2NotAvailable
1.3.6.1.4.1.850.1.4.2.6.2 - tlpNotificationsAtsSource2VoltageDrop
1.3.6.1.4.1.850.1.4.2.6.10 - tlpNotificationsAtsTimedReturnToSource1
1.3.6.1.4.1.850.1.4.2.6.11 - tlpNotificationsAtsTimedReturnToSource2
1.3.6.1.4.1.850.1.4.2.6.12 - tlpNotificationsAtsTransferToSource1
1.3.6.1.4.1.850.1.4.2.6.13 - tlpNotificationsAtsTransferToSource2
1.3.6.1.4.1.850.1.4.2.6.14 - tlpNotificationsDeviceAcFailure
1.3.6.1.4.1.850.1.4.2.2.35 - tlpNotificationsDeviceAcknowledgeFaults
1.3.6.1.4.1.850.1.4.2.2.17 - tlpNotificationsDeviceCircuitBreakerOpen
1.3.6.1.4.1.850.1.4.2.2.38 - tlpNotificationsDeviceConfigurationChange
1.3.6.1.4.1.850.1.4.2.2.3 - tlpNotificationsDeviceCriticalNvrValuesBlank
1.3.6.1.4.1.850.1.4.2.2.28 - tlpNotificationsDeviceCurrentLimitShutdown
1.3.6.1.4.1.850.1.4.2.2.12 - tlpNotificationsDeviceEepromOperationTimeout
1.3.6.1.4.1.850.1.4.2.2.44 - tlpNotificationsDeviceEepromQueueOverflow
1.3.6.1.4.1.850.1.4.2.2.42 - tlpNotificationsDeviceEepromWriteFault
1.3.6.1.4.1.850.1.4.2.2.43 - tlpNotificationsDeviceEmergencyShutdown
1.3.6.1.4.1.850.1.4.2.2.37 - tlpNotificationsDeviceEpo
1.3.6.1.4.1.850.1.4.2.2.31 - tlpNotificationsDeviceFactoryRestoreFault
1.3.6.1.4.1.850.1.4.2.2.47 - tlpNotificationsDeviceFailSafeClockMonitorEngaged
1.3.6.1.4.1.850.1.4.2.2.23 - tlpNotificationsDeviceFailedModeTransitionToIdle
1.3.6.1.4.1.850.1.4.2.2.15 - tlpNotificationsDeviceFirmwareMismatch
1.3.6.1.4.1.850.1.4.2.2.32 - tlpNotificationsDeviceFirmwareUpdate
1.3.6.1.4.1.850.1.4.2.2.4 - tlpNotificationsDeviceI2cWriteDelayed
1.3.6.1.4.1.850.1.4.2.2.45 - tlpNotificationsDeviceInternalCommunicationsLost
1.3.6.1.4.1.850.1.4.2.2.16 - tlpNotificationsDeviceInternalFirmwareFault
1.3.6.1.4.1.850.1.4.2.2.1 - tlpNotificationsDeviceInternalHardwareFault
1.3.6.1.4.1.850.1.4.2.2.2 - tlpNotificationsDeviceMicrocontrollerReset
1.3.6.1.4.1.850.1.4.2.2.5 - tlpNotificationsDeviceModeTransitionTimeout
1.3.6.1.4.1.850.1.4.2.2.14 - tlpNotificationsDeviceNvrChecksumMismatch
1.3.6.1.4.1.850.1.4.2.2.7 - tlpNotificationsDeviceOutputOff
1.3.6.1.4.1.850.1.4.2.2.29 - tlpNotificationsDeviceOverLoadShutdown
1.3.6.1.4.1.850.1.4.2.2.11 - tlpNotificationsDeviceOverTemperatureShutdown
1.3.6.1.4.1.850.1.4.2.2.13 - tlpNotificationsDeviceOverloadRelease
1.3.6.1.4.1.850.1.4.2.2.33 - tlpNotificationsDevicePowerSupplyShutdown
1.3.6.1.4.1.850.1.4.2.2.10 - tlpNotificationsDeviceRampShedNvrWriteFailed
1.3.6.1.4.1.850.1.4.2.2.46 - tlpNotificationsDeviceRelayInUnexpectedState
1.3.6.1.4.1.850.1.4.2.2.41 - tlpNotificationsDeviceRelayResetTimeOutOfRange
1.3.6.1.4.1.850.1.4.2.2.49 - tlpNotificationsDeviceRelaySetTimeOutOfRange
1.3.6.1.4.1.850.1.4.2.2.48 - tlpNotificationsDeviceRtosFault
1.3.6.1.4.1.850.1.4.2.2.27 - tlpNotificationsDeviceSiteWiringFault
1.3.6.1.4.1.850.1.4.2.2.36 - tlpNotificationsDeviceStartup
1.3.6.1.4.1.850.1.4.2.2.30 - tlpNotificationsDeviceSupplyMonitorInterrupt
1.3.6.1.4.1.850.1.4.2.2.39 - tlpNotificationsDeviceSystemInformation
1.3.6.1.4.1.850.1.4.2.2.6 - tlpNotificationsDeviceSystemTickTimeout
1.3.6.1.4.1.850.1.4.2.2.40 - tlpNotificationsDeviceTransferToIdle
1.3.6.1.4.1.850.1.4.2.2.24 - tlpNotificationsDeviceTransferToLatchedIdle
1.3.6.1.4.1.850.1.4.2.2.20 - tlpNotificationsDeviceTransferToLatchedLine
1.3.6.1.4.1.850.1.4.2.2.22 - tlpNotificationsDeviceTransferToLatchedStandby
1.3.6.1.4.1.850.1.4.2.2.21 - tlpNotificationsDeviceTransferToLine
1.3.6.1.4.1.850.1.4.2.2.34 - tlpNotificationsDeviceTransferToRestart
1.3.6.1.4.1.850.1.4.2.2.18 - tlpNotificationsDeviceTransferToWatchdogRestart
1.3.6.1.4.1.850.1.4.2.2.19 - tlpNotificationsDeviceUsbCommunicationsEstablished
1.3.6.1.4.1.850.1.4.2.2.8 - tlpNotificationsDeviceUsbCommunicationsLost
1.3.6.1.4.1.850.1.4.2.2.9 - tlpNotificationsDeviceVoutOverVoltageShutdown
1.3.6.1.4.1.850.1.4.2.2.26 - tlpNotificationsDeviceVoutUnderVoltageShutdown
1.3.6.1.4.1.850.1.4.2.2.25 - tlpNotificationsPduCrestFactorOutOfRange
1.3.6.1.4.1.850.1.4.2.4.1 - tlpNotificationsPduLineInRange
1.3.6.1.4.1.850.1.4.2.4.3 - tlpNotificationsPduLineModeTransferToLinePartialPowerup
1.3.6.1.4.1.850.1.4.2.4.7 - tlpNotificationsPduLineOutOfRange
1.3.6.1.4.1.850.1.4.2.4.4 - tlpNotificationsPduNotableRelayResponseTimes
1.3.6.1.4.1.850.1.4.2.4.5 - tlpNotificationsPduOutletNearMaxRating
1.3.6.1.4.1.850.1.4.2.4.6 - tlpNotificationsPduSinglePhasing
1.3.6.1.4.1.850.1.4.2.4.8 - tlpNotificationsPduTransferToForceLineMode
1.3.6.1.4.1.850.1.4.2.4.2 - tlpNotificationsUpsBatteryCommunicationsEstablished
1.3.6.1.4.1.850.1.4.2.3.22 - tlpNotificationsUpsBatteryCommunicationsLost
1.3.6.1.4.1.850.1.4.2.3.21 - tlpNotificationsUpsBatteryConfigurationMismatch
1.3.6.1.4.1.850.1.4.2.3.6 - tlpNotificationsUpsBatteryInstallation
1.3.6.1.4.1.850.1.4.2.3.9 - tlpNotificationsUpsBatteryLowPercentageShutdown
1.3.6.1.4.1.850.1.4.2.3.2 - tlpNotificationsUpsBatteryLowVoltageShutdown
1.3.6.1.4.1.850.1.4.2.3.1 - tlpNotificationsUpsBatteryOtaShutdown
1.3.6.1.4.1.850.1.4.2.3.23 - tlpNotificationsUpsBatteryOverCurrentShutdown
1.3.6.1.4.1.850.1.4.2.3.4 - tlpNotificationsUpsBatteryOverVoltageShutdown
1.3.6.1.4.1.850.1.4.2.3.3 - tlpNotificationsUpsBatteryPackCountChange
1.3.6.1.4.1.850.1.4.2.3.33 - tlpNotificationsUpsBatteryUnderVoltageShutdown
1.3.6.1.4.1.850.1.4.2.3.7 - tlpNotificationsUpsBatteryUnknownTypeShutdown
1.3.6.1.4.1.850.1.4.2.3.5 - tlpNotificationsUpsBypassOutOfRange
1.3.6.1.4.1.850.1.4.2.3.43 - tlpNotificationsUpsBypassPowerDistributionModuleDisconnected
1.3.6.1.4.1.850.1.4.2.3.17 - tlpNotificationsUpsCartInstallation
1.3.6.1.4.1.850.1.4.2.3.24 - tlpNotificationsUpsChargerAcceptanceToFloat
1.3.6.1.4.1.850.1.4.2.3.11 - tlpNotificationsUpsChargerBulkToAcceptance
1.3.6.1.4.1.850.1.4.2.3.10 - tlpNotificationsUpsChargerFloatToBulk
1.3.6.1.4.1.850.1.4.2.3.12 - tlpNotificationsUpsDeadBatteryRecoveryShutdown
1.3.6.1.4.1.850.1.4.2.3.25 - tlpNotificationsUpsDryContactShutdown
1.3.6.1.4.1.850.1.4.2.3.45 - tlpNotificationsUpsEnergySavingShutdown
1.3.6.1.4.1.850.1.4.2.3.44 - tlpNotificationsUpsFullBridgeCurrentLimitShutdown
1.3.6.1.4.1.850.1.4.2.3.27 - tlpNotificationsUpsFullBridgeNotSteadyShutdown
1.3.6.1.4.1.850.1.4.2.3.26 - tlpNotificationsUpsInverterOcp
1.3.6.1.4.1.850.1.4.2.3.29 - tlpNotificationsUpsInverterOverCurrentShutdown
1.3.6.1.4.1.850.1.4.2.3.46 - tlpNotificationsUpsInverterVbusShutdown
1.3.6.1.4.1.850.1.4.2.3.30 - tlpNotificationsUpsLineConnectRelayFaultShutdown
1.3.6.1.4.1.850.1.4.2.3.15 - tlpNotificationsUpsLowBatteryPercentageShutdown
1.3.6.1.4.1.850.1.4.2.3.20 - tlpNotificationsUpsManualBypassActivatedFromUnsupportedMode
1.3.6.1.4.1.850.1.4.2.3.18 - tlpNotificationsUpsModbusBatteryStatusShutdown
1.3.6.1.4.1.850.1.4.2.3.32 - tlpNotificationsUpsOnBatteryTimeoutShutdown
1.3.6.1.4.1.850.1.4.2.3.19 - tlpNotificationsUpsPfcOverCurrentFault
1.3.6.1.4.1.850.1.4.2.3.50 - tlpNotificationsUpsPfcOverVoltageFault
1.3.6.1.4.1.850.1.4.2.3.48 - tlpNotificationsUpsPfcPrechargeFault
1.3.6.1.4.1.850.1.4.2.3.47 - tlpNotificationsUpsPfcUnderVoltageFault
1.3.6.1.4.1.850.1.4.2.3.49 - tlpNotificationsUpsSlaBatteryOverTemperatureShutdown
1.3.6.1.4.1.850.1.4.2.3.8 - tlpNotificationsUpsTransferToBattery
1.3.6.1.4.1.850.1.4.2.3.34 - tlpNotificationsUpsTransferToBypass
1.3.6.1.4.1.850.1.4.2.3.35 - tlpNotificationsUpsTransferToDbrLine
1.3.6.1.4.1.850.1.4.2.3.36 - tlpNotificationsUpsTransferToDbrStandby
1.3.6.1.4.1.850.1.4.2.3.37 - tlpNotificationsUpsTransferToEconomy
1.3.6.1.4.1.850.1.4.2.3.14 - tlpNotificationsUpsTransferToFaultBypass
1.3.6.1.4.1.850.1.4.2.3.16 - tlpNotificationsUpsTransferToFaultStandby
1.3.6.1.4.1.850.1.4.2.3.31 - tlpNotificationsUpsTransferToOnline
1.3.6.1.4.1.850.1.4.2.3.39 - tlpNotificationsUpsTransferToSelftest
1.3.6.1.4.1.850.1.4.2.3.13 - tlpNotificationsUpsTransferToStandby
1.3.6.1.4.1.850.1.4.2.3.38 - tlpNotificationsUpsTransitionFailed
1.3.6.1.4.1.850.1.4.2.3.28 - tlpNotificationsUpsV20BusNotSteadyShutdown
1.3.6.1.4.1.850.1.4.2.3.40 - tlpNotificationsUpsV20BusOverVoltageShutdown
1.3.6.1.4.1.850.1.4.2.3.41 - tlpNotificationsUpsV20BusUnderVoltageShutdown
1.3.6.1.4.1.850.1.4.2.3.42 - tlpNotifySystemShutdown
1.3.6.1.4.1.850.1.4.1.4 - tlpNotifySystemStartup
1.3.6.1.4.1.850.1.4.1.3 - tlpNotifySystemUpdate
1.3.6.1.4.1.850.1.4.1.5 - tlpNotifyTest
1.3.6.1.4.1.850.1.4.1.6