PERLE-IOLAN-SDS-MIB
Perle Systems LimitedThe private MIB module for the Perle IOLAN SDS, SCS and STS
snmptranslate -m PERLE-IOLAN-SDS-MIB -Tpsnmpwalk -v2c -c <community> -m PERLE-IOLAN-SDS-MIB <host> 1.3.6.1.4.1.1966.12Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nperle | 1.3.6.1.4.1.1966 | |||
| IsdsMIB | 1.3.6.1.4.1.1966.12 | |||
identity The private MIB module for the Perle IOLAN SDS, SCS and STS | ||||
| NsdsMIBObjects | 1.3.6.1.4.1.1966.12.1 | |||
| NadminInfo | 1.3.6.1.4.1.1966.12.1.1 | |||
| SadminFunction | 1.3.6.1.4.1.1966.12.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Perform a specific function on the Device Server. If you want to save all the changes that have been submitted to the Device Server, you need to expand the adminInfo container folder and SET the adminFunction to 1 to write to FLASH. To make the configuration changes take effect, SET the adminFunction to 3 to reboot the Device Server.
| ||||
| SadminLastFunction | 1.3.6.1.4.1.1966.12.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The last function requested
| ||||
| SadminStatus | 1.3.6.1.4.1.1966.12.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the last function performed.
| ||||
| SadminSystemDate | 1.3.6.1.4.1.1966.12.1.1.4 | Date | RW | |
scalar · Date · read-write · current The system date. Format dd/mm/yyyy | ||||
| SadminSystemTime | 1.3.6.1.4.1.1966.12.1.1.5 | Time | RW | |
scalar · Time · read-write · current The system time (local time). Format hh:mm:ss | ||||
| SadminKillLine | 1.3.6.1.4.1.1966.12.1.1.6 | PortNumber | RW | |
scalar · PortNumber · read-write · current Enter the line number you want to reset | ||||
| SadminGetClusteredSlavePortNames | 1.3.6.1.4.1.1966.12.1.1.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current Set the clustered slave IP address in order to retrieve its serial port names. | ||||
| SadminPowerOn | 1.3.6.1.4.1.1966.12.1.1.8 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Turn on the power of the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#:plug#(1 based). | ||||
| SadminPowerOff | 1.3.6.1.4.1.1966.12.1.1.9 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Turn off the power of the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#:plug#(1 based). | ||||
| SadminPowerBoot | 1.3.6.1.4.1.1966.12.1.1.10 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Boot the whole line(if the line is not a power management line) or a plug (the line is a power management line), and the input format is line#:plug#(1 based). | ||||
| SadminPowerReset | 1.3.6.1.4.1.1966.12.1.1.11 | PortNumber | RW | |
scalar · PortNumber · read-write · current Reset whole line(only if the line is a power management line), and the input is the line number(1 based). | ||||
| SadminPowerStatus | 1.3.6.1.4.1.1966.12.1.1.12 | DisplayString (SIZE (1..10)) | RW | |
scalar · DisplayString (SIZE (1..10)) · read-write · current Return the status of a plug (the line is a power management line). The input format is line#:plug#(1 based). The output is one of following strings: 'off', 'on' or 'undefined'. | ||||
| SadminIpsec | 1.3.6.1.4.1.1966.12.1.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current IPsec functions.
| ||||
| SadminPowerMonitorOn | 1.3.6.1.4.1.1966.12.1.1.14 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Enable host monitoring for a power plug, on a serial port configured for power management. The input format is line#:plug#. e.g. Use '5:10' for serial port 5, plug 10. | ||||
| SadminPowerMonitorOff | 1.3.6.1.4.1.1966.12.1.1.15 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Disable host monitoring for a power plug, on a serial port configured for power management. The input format is line#:plug#. e.g. Use '5:10' for serial port 5, plug 10. | ||||
| SadminPowerMonitorStatus | 1.3.6.1.4.1.1966.12.1.1.16 | DisplayString (SIZE (1..10)) | RW | |
scalar · DisplayString (SIZE (1..10)) · read-write · current Return the status of the host monitoring feature for a power plug, on a serial port configured for power management. The input format is line#:plug#. The output is one of following strings: 'off', 'on' or 'undefined'. | ||||
| SadminPowerMonitorNumberOfReboots | 1.3.6.1.4.1.1966.12.1.1.17 | DisplayString (SIZE (1..10)) | RW | |
scalar · DisplayString (SIZE (1..10)) · read-write · current Return the number of power cycles (reboots) initiated by the host monitoring feature for a power plug, on a serial port configured for power management. The input format is line#:plug#. The output is a string containing the number of reboots. | ||||
| SadminPowerMonitorLastRebootTime | 1.3.6.1.4.1.1966.12.1.1.18 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current Returns the time of the last power cycle (reboot), initiated by the host monitoring feature for a power plug, on a serial port configured for power management. The input format is line#:plug#. The output is a string containing the date and time of the last reboot. | ||||
| SadminPowerMonitorResetRebootInfo | 1.3.6.1.4.1.1966.12.1.1.19 | DisplayString (SIZE (1..5)) | RW | |
scalar · DisplayString (SIZE (1..5)) · read-write · current Reset the monitor reboot information (number of reboots and time of last reboot. The input format is line#:plug#. e.g. Use '5:10' for serial port 5, plug 10. | ||||
| SadminResetSerialStatistics | 1.3.6.1.4.1.1966.12.1.1.20 | PortNumber | RW | |
scalar · PortNumber · read-write · current Enter the line number you want to reset statistics | ||||
| SadminChassisSerialNumber | 1.3.6.1.4.1.1966.12.1.1.21 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current Chassis Serial Number | ||||
| SadminSlot1SerialNumber | 1.3.6.1.4.1.1966.12.1.1.22 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current Slot 1 Serial Number | ||||
| SadminSlot2SerialNumber | 1.3.6.1.4.1.1966.12.1.1.23 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current Slot 2 Serial Number | ||||
| SadminSlot3SerialNumber | 1.3.6.1.4.1.1966.12.1.1.24 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current Slto 3 Serial Number | ||||
| SadminLTECardSerialNumber | 1.3.6.1.4.1.1966.12.1.1.25 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current LTE CardSerial Number | ||||
| SadminWIFICardSerialNumber | 1.3.6.1.4.1.1966.12.1.1.26 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current WIFI Card Serial Number | ||||
| SadminPartNumber | 1.3.6.1.4.1.1966.12.1.1.27 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current Device part Number | ||||
| SadminTemperature | 1.3.6.1.4.1.1966.12.1.1.28 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current IOLAN Internal temperature | ||||
| NserverInfo | 1.3.6.1.4.1.1966.12.1.2 | |||
| SserverStatus | 1.3.6.1.4.1.1966.12.1.2.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SserverName | 1.3.6.1.4.1.1966.12.1.2.2 | DisplayString (SIZE (1..63)) | RW | |
scalar · DisplayString (SIZE (1..63)) · read-write · current The name of the Device Server. | ||||
| SserverDomainName | 1.3.6.1.4.1.1966.12.1.2.3 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The domain name of the Device Server. | ||||
| SserverIPaddress | 1.3.6.1.4.1.1966.12.1.2.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Device Server's unique IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. | ||||
| SserverSubnetBits | 1.3.6.1.4.1.1966.12.1.2.5 | Integer32 (0..32) | RW | |
scalar · Integer32 (0..32) · read-write · current The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the correct value is determined based on the class of the IP Address. | ||||
| SserverPortBuffering | 1.3.6.1.4.1.1966.12.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies where the port buffer log is kept, either Off, Local, Remote, or Both. If Remote or Both is selected, you must specify an NFS server location for the port buffer log.
| ||||
| SserverViewPortBufferString | 1.3.6.1.4.1.1966.12.1.2.7 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify control (unprintable) codes by putting the decimal value in angle brackets < > (for example, Escape b is <027>b). The default is ~view. | ||||
| SserverTimeStamping | 1.3.6.1.4.1.1966.12.1.2.8 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable time stamping of the port buffer data. | ||||
| SserverSessionEscapeString | 1.3.6.1.4.1.1966.12.1.2.9 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The key sequence to escape the current session and display the session options. | ||||
| SserverNFSHostName | 1.3.6.1.4.1.1966.12.1.2.10 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The NFS host that the Device Server will use for its Remote Port Buffering feature. The Device Server will open a file on the NFS host for each reverse SSH or reverse Telnet line, and send any port data to be written to those files. The default is None. This field is required when Mode is set to Remote or Both. The host name must be defined in the hosts table. | ||||
| SserverNFSDirectory | 1.3.6.1.4.1.1966.12.1.2.11 | DisplayString (SIZE (0..40)) | RW | |
scalar · DisplayString (SIZE (0..40)) · read-write · current The directory and/or subdirectories where the Remote Port Buffering files will be created. This field is used when Port Buffering Mode is set to Remote or Both. For multiple Device Servers using the same NFS host, it is recommended that each Device Server have its own unique directory to house the remote port log files. The default is /device_server/portlogs. | ||||
| SserverNFSEncryption | 1.3.6.1.4.1.1966.12.1.2.12 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Determines if the data sent to the NFS host is sent encrypted or in the clear across the LAN. The default is set of Off. NOTE: When NFS encryption is enabled, the Decoder utility software is required to be installed on the NFS host for decrypting the data to a readable format. | ||||
| SserverPortMenuString | 1.3.6.1.4.1.1966.12.1.2.13 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The string (up to 8 characters) used by a a session connected to a serial port to display the port buffer for that particular serial port. You can specify control (unprintable) codes by putting the decimal value in angle brackets < > (for example, Escape b is <027>b). The default is ~view. | ||||
| SserverBreakEnabled | 1.3.6.1.4.1.1966.12.1.2.15 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enables/disables proprietary inband SSH break signal processing as well as the existing Reverse Telnet break signal. This parameter can also enable/disable the out-of-band break signals for TruePort. The default value is Off.. | ||||
| SserverBanner | 1.3.6.1.4.1.1966.12.1.2.16 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, displays a product identification banner before login prompts. Default is off. | ||||
| SserverSecurity | 1.3.6.1.4.1.1966.12.1.2.17 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the hosts table. | ||||
| SserverPromptWithName | 1.3.6.1.4.1.1966.12.1.2.18 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the Device Server name will be included in login prompts, command line prompts, etc. | ||||
| SserverPasswordLimit | 1.3.6.1.4.1.1966.12.1.2.19 | Integer32 (0..10) | RW | |
scalar · Integer32 (0..10) · read-write · current The number of attempts a user is allowed to enter a password for a port. If this limit is exceeded, the port is disabled for 5 minutes. A user with Admin level rights can restart the port, bypassing the timeout, by issuing a kill on the disabled port. The default value is 3. | ||||
| SserverOemLogin | 1.3.6.1.4.1.1966.12.1.2.20 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When set, and a custom language file is in use, the login prompt will use the string defined in the language file as the login prompt instead of the default prompt, login:. | ||||
| SserverBypassPassword | 1.3.6.1.4.1.1966.12.1.2.21 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When set, authorized users who do not have a password set, with the exception of the Admin user, WILL NOT be prompted for a password at login with Local Authentication. | ||||
| SserverSingleTelnet | 1.3.6.1.4.1.1966.12.1.2.22 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Sets all reverse connections to a one connection at a time mode. Server-side applications will get a (socket) connection refused until: All data from previous connections on that serial port has drained, There are no other connections, Up to a 1 second interconnection poll timer has expired This also enables a per-connection keepalive TCP keepalive feature. After approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, thus either ensuring the connection stays active OR causing a dropped connection condition to be recognized by the reverse service (all connections). | ||||
| SserverFlushOnClose | 1.3.6.1.4.1.1966.12.1.2.23 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When enabled, deletes any pending data when a port is closed; as opposed to maintaining the port to send pending data. Default is Off. | ||||
| SserverPrimaryAuthMethod | 1.3.6.1.4.1.1966.12.1.2.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The first authentication method that the Device Server attempts. Some type of authentication must be done by the Device Server.
| ||||
| SserverSecondaryAuthMethod | 1.3.6.1.4.1.1966.12.1.2.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current If the Primary Authentication Method fails, the next authentication method that the Device Server attempts. You can choose to use authentication methods in combination. For example, you can specify the Primary Authentication Method as Local and the Secondary Authentication Method as RADIUS. Therefore, some users can be defined in the Device Server (Local) others in RADIUS.
| ||||
| SserverEthernetSpeedDuplex | 1.3.6.1.4.1.1966.12.1.2.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Duplex 100 Mbps Half Duplex 100 Mbps Full Duplex 1000 Mbps Full Duplex Half duplex for sfp module Full duplex for sfp module
| ||||
| SserverTFTPRetry | 1.3.6.1.4.1.1966.12.1.2.27 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current The number of times the Device Server will attempt to transfer (using TFTP) a file to/from a host. Default is 5. A value of 0 (zero) means that the Device Server will not attempt a retry should TFTP fail. | ||||
| SserverTFTPTimeOut | 1.3.6.1.4.1.1966.12.1.2.28 | Integer32 (3..10) | RW | |
scalar · Integer32 (3..10) · read-write · current The time, in seconds, that the Device Server will wait for a successful transmit or receipt of TFTP packets before retrying a TFTP transfer. Default is 3 seconds. | ||||
| SserverEnableGuestLogin | 1.3.6.1.4.1.1966.12.1.2.29 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Allow users who are not defined in the User database to log into the Device Server with any user ID and the specified password. Guest users inherit their settings from the Default User's configuration. | ||||
| SserverSecondaryIPaddress | 1.3.6.1.4.1.1966.12.1.2.30 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Device Server's eth2 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. | ||||
| SserverSecondarySubnetBits | 1.3.6.1.4.1.1966.12.1.2.31 | Integer32 (0..32) | RW | |
scalar · Integer32 (0..32) · read-write · current The number of bits in the eth2 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the correct value is determined based on the class of the IP Address. | ||||
| SserverEthSecondarySpeedDuplex | 1.3.6.1.4.1.1966.12.1.2.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current Define the Ethernet connection speed at one of the following: automatically detects the Ethernet interface speed and duplex 10 Mbps Half Duplex 10 Mbps Full Duplex 100 Mbps Half Duplex 100 Mbps Full Duplex 1000 Mbps Full Duplex Half duplex for sfp module Full duplex for sfp module Note: 1000 Mbps is not supported on certain models
| ||||
| SserverDHCPUpdateDNSPrimary | 1.3.6.1.4.1.1966.12.1.2.33 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server will be updated after the device server gets the IP address via DHCP. | ||||
| SserverPowerManagementMenuString | 1.3.6.1.4.1.1966.12.1.2.34 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current Menu String for power management . | ||||
| SserverActiveStandbyEnabled | 1.3.6.1.4.1.1966.12.1.2.35 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable active standby. | ||||
| SserverActiveStandbyMiimon | 1.3.6.1.4.1.1966.12.1.2.36 | Integer32 (0..9999) | RW | |
scalar · Integer32 (0..9999) · read-write · current Time in msec for frequency in MII link monitoring. | ||||
| SserverActiveStandbyUpdelay | 1.3.6.1.4.1.1966.12.1.2.37 | Integer32 (0..9999) | RW | |
scalar · Integer32 (0..9999) · read-write · current Delay in enabling a link after the 'link up' status has been detected | ||||
| SserverDropSessionDetectionTime | 1.3.6.1.4.1.1966.12.1.2.38 | Integer32 (1..32767) | RW | |
scalar · Integer32 (1..32767) · read-write · current Dropped session detection time | ||||
| SserverAutoObtainDNS | 1.3.6.1.4.1.1966.12.1.2.39 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server IP address will be get automatically via DHCP. | ||||
| SserverAutoObtainWINS | 1.3.6.1.4.1.1966.12.1.2.40 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the WINS server IP address will be get automatically via DHCP. | ||||
| SserverAutoObtainGW | 1.3.6.1.4.1.1966.12.1.2.41 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the default gateway IP address will be get automatically via DHCP. | ||||
| SserverAlwaysAttemptSecond | 1.3.6.1.4.1.1966.12.1.2.42 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the secondary authentication method will always be used. | ||||
| SserverDHCPUpdateDNSSecondary | 1.3.6.1.4.1.1966.12.1.2.43 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server will be updated for the secondary Ethernet interface after the device server gets the IP address via DHCP. | ||||
| SserverDomainPrefixPrimary | 1.3.6.1.4.1.1966.12.1.2.44 | DisplayString (SIZE (0..7)) | RW | |
scalar · DisplayString (SIZE (0..7)) · read-write · current The domain prefix for primary Ethernet interface of the Device Server. | ||||
| SserverDomainPrefixSecondary | 1.3.6.1.4.1.1966.12.1.2.45 | DisplayString (SIZE (0..7)) | RW | |
scalar · DisplayString (SIZE (0..7)) · read-write · current The domain prefix for secondary Ethernet interface of the Device Server. | ||||
| SserverPortBufferSyslog | 1.3.6.1.4.1.1966.12.1.2.46 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Output port buffer to syslog. | ||||
| SserverPortBufferKeyStroke | 1.3.6.1.4.1.1966.12.1.2.47 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on port buffer keystroke. | ||||
| SserverIpsecUseNat | 1.3.6.1.4.1.1966.12.1.2.48 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable or disable NAT traversal for IPsec. | ||||
| SserverAutoObtainDNSV6 | 1.3.6.1.4.1.1966.12.1.2.49 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server IP address will be obtained automatically via DHCPv6. | ||||
| SserverAuthenticateAdminlocal | 1.3.6.1.4.1.1966.12.1.2.50 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, admin user will be only authenticated locally. | ||||
| SserverDisplayMotdWeb | 1.3.6.1.4.1.1966.12.1.2.51 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the WebManager will display message of the day. | ||||
| SserverGenericWebLoginScreen | 1.3.6.1.4.1.1966.12.1.2.52 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the WebManager will not display device server's information on login screen. | ||||
| SserverNfsHostTunnel | 1.3.6.1.4.1.1966.12.1.2.54 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the port buffering NFS host. | ||||
| SserverPortBufferSyslogLevel | 1.3.6.1.4.1.1966.12.1.2.55 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify the syslog level to use for port buffering
| ||||
| SserverEasyPortWebClient | 1.3.6.1.4.1.1966.12.1.2.56 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the telnet/SSH client for EasyPortWeb. Select 'java' to use the Java applet client. Select 'javascript' to use the web browser-based client.
| ||||
| SserverDataLoggingBufferSize | 1.3.6.1.4.1.1966.12.1.2.57 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the buffer size for Data Logging. | ||||
| SserverDataLoggingOptions | 1.3.6.1.4.1.1966.12.1.2.58 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies whether data logging should be backword compatible with versions of firmware prior to Version 4.3.
| ||||
| SserverKeepAliveRetries | 1.3.6.1.4.1.1966.12.1.2.59 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the number of time the iolan will retry the TCP keepalive message. | ||||
| SserverKeepAliveTimeout | 1.3.6.1.4.1.1966.12.1.2.60 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the time to wait for a tcp keepalive message response. | ||||
| SserverEth0MTU | 1.3.6.1.4.1.1966.12.1.2.61 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the size of the ethernet MTU. | ||||
| SserverEth1MTU | 1.3.6.1.4.1.1966.12.1.2.62 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the size of the ethernet MTU. | ||||
| SserverTFTPHost | 1.3.6.1.4.1.1966.12.1.2.63 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name of the TFTP host. | ||||
| SserverTFTPTunnelName | 1.3.6.1.4.1.1966.12.1.2.64 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| SserverSecurityRange | 1.3.6.1.4.1.1966.12.1.2.65 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress | 1.3.6.1.4.1.1966.12.1.2.66 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress | 1.3.6.1.4.1.1966.12.1.2.67 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverAccountLockOut | 1.3.6.1.4.1.1966.12.1.2.68 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will lock out the user after a number of invalid login attempts. | ||||
| SserverLoginOnce | 1.3.6.1.4.1.1966.12.1.2.69 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only allow a user to login once. | ||||
| SserverPasswordRules | 1.3.6.1.4.1.1966.12.1.2.70 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will enforce the password rules for the user password. | ||||
| SserverDisableWebCaching | 1.3.6.1.4.1.1966.12.1.2.71 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will disable caching in the web browser. | ||||
| SserverDisableIpForwarding | 1.3.6.1.4.1.1966.12.1.2.72 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will disable IP forwarding between ethernet interfaces. | ||||
| SserverSecurityRange2 | 1.3.6.1.4.1.1966.12.1.2.73 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress2 | 1.3.6.1.4.1.1966.12.1.2.74 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress2 | 1.3.6.1.4.1.1966.12.1.2.75 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverSecurityRange3 | 1.3.6.1.4.1.1966.12.1.2.76 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress3 | 1.3.6.1.4.1.1966.12.1.2.77 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress3 | 1.3.6.1.4.1.1966.12.1.2.78 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverSecurityRange4 | 1.3.6.1.4.1.1966.12.1.2.79 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress4 | 1.3.6.1.4.1.1966.12.1.2.80 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress4 | 1.3.6.1.4.1.1966.12.1.2.81 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverSecurityRange5 | 1.3.6.1.4.1.1966.12.1.2.82 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress5 | 1.3.6.1.4.1.1966.12.1.2.83 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress5 | 1.3.6.1.4.1.1966.12.1.2.84 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverSecurityRange6 | 1.3.6.1.4.1.1966.12.1.2.85 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the server will only respond to, and allow access to and from, the IP addresses of hosts configured in the range of IP addresses. | ||||
| SserverRangeStartIPaddress6 | 1.3.6.1.4.1.1966.12.1.2.86 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverRangeEndIPaddress6 | 1.3.6.1.4.1.1966.12.1.2.87 | IpAddress | RW | |
scalar · IpAddress · read-write · current The end IP address of the range that the server will only respond to, and allow access to and from. | ||||
| SserverIPaddress3 | 1.3.6.1.4.1.1966.12.1.2.88 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Device Server's eth3 IPv4 network IP address. If you are using the Device Server in an IPv6 network, this field can be left blank. | ||||
| SserverSubnetBits3 | 1.3.6.1.4.1.1966.12.1.2.89 | Integer32 (0..32) | RW | |
scalar · Integer32 (0..32) · read-write · current The number of bits in the eth3 subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 0-32. The default is 0. When the value is 0, the correct value is determined based on the class of the IP Address. | ||||
| SserverDHCPUpdateDNS3 | 1.3.6.1.4.1.1966.12.1.2.90 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server will be updated for the third Ethernet interface after the device server gets the IP address via DHCP. | ||||
| SserverDomainPrefix3 | 1.3.6.1.4.1.1966.12.1.2.91 | DisplayString (SIZE (0..7)) | RW | |
scalar · DisplayString (SIZE (0..7)) · read-write · current The domain prefix for third Ethernet interface of the Device Server. | ||||
| SserverEth3MTU | 1.3.6.1.4.1.1966.12.1.2.92 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the size of the third Ethernet MTU. | ||||
| SserverEth1MediaType | 1.3.6.1.4.1.1966.12.1.2.93 | INTEGER | RW | |
scalar · INTEGER · read-write · current For combo ports, specifies the combo port mode. If not supported, this object is not writeable.
| ||||
| SserverEth1Sgmii | 1.3.6.1.4.1.1966.12.1.2.94 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable. | ||||
| SserverEth2MediaType | 1.3.6.1.4.1.1966.12.1.2.95 | INTEGER | RW | |
scalar · INTEGER · read-write · current For combo ports, specifies the combo port mode. If not supported, this object is not writeable.
| ||||
| SserverEth2Sgmii | 1.3.6.1.4.1.1966.12.1.2.96 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current For SFP ports, specifies whether this port has SGMII (Serial Gigibit Media Independent Interface) configured. If not supported, this object is not writeable. | ||||
| NhostsInfo | 1.3.6.1.4.1.1966.12.1.3 | |||
| ThostsInfoTable | 1.3.6.1.4.1.1966.12.1.3.1 | NA | ||
table · not-accessible · current The hosts info table. | ||||
| RhostsInfoEntry | 1.3.6.1.4.1.1966.12.1.3.1.1 | NA | ||
row · not-accessible · current An entry in the hostsInfoTable, each relating to a host.
| ||||
| ChostIndex | 1.3.6.1.4.1.1966.12.1.3.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this host. | ||||
| ChostStatus | 1.3.6.1.4.1.1966.12.1.3.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ChostName | 1.3.6.1.4.1.1966.12.1.3.1.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host name used for this host entry. To delete an entry, blank out this field. If blank, this entry is currently unused. | ||||
| ChostIpAddr | 1.3.6.1.4.1.1966.12.1.3.1.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The host IP address used for this entry. | ||||
| Cfqdn | 1.3.6.1.4.1.1966.12.1.3.1.1.5 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current The host full qualified domain name for the host entry. If blank, this entry is currently unused. | ||||
| NuserInfo | 1.3.6.1.4.1.1966.12.1.4 | |||
| TuserTable | 1.3.6.1.4.1.1966.12.1.4.1 | NA | ||
table · not-accessible · current The user table. | ||||
| RuserEntry | 1.3.6.1.4.1.1966.12.1.4.1.1 | NA | ||
| CuserIndex | 1.3.6.1.4.1.1966.12.1.4.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this user. | ||||
| CuserStatus | 1.3.6.1.4.1.1966.12.1.4.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CuserName | 1.3.6.1.4.1.1966.12.1.4.1.1.3 | DisplayString (SIZE (0..16)) | RW | |
column · DisplayString (SIZE (0..16)) · read-write · current The user name. To delete a user, set this field to blank. If blank, this entry is currently unused. | ||||
| CuserService | 1.3.6.1.4.1.1966.12.1.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The type of service that the user will use: dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear or sslraw.
| ||||
| CuserLanguage | 1.3.6.1.4.1.1966.12.1.4.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the language the user will view all Menu, CLI, and WebManager strings.
| ||||
| CuserLevel | 1.3.6.1.4.1.1966.12.1.4.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Admin-Total access to the Device Server. More than one admin user account can exist, but we recommend that you only have one. Normal-Limited access to the Device Server. Limited CLI commands and Menu access, can configure the user's own configuration settings. Restricted-Can only access predefined sessions or access the Easy Port Access menu. Can only view or monitor the Device Server using CLI commands to display information about the Device Server. Menu-Only access predefined sessions or access the Easy Port Access menu. The Easy Port Access allows the user to connect to the accessible line without disconnecting their initial connection to the Device Server. Does not have any access to CLI commands.
| ||||
| CuserHotKeyPrefix | 1.3.6.1.4.1.1966.12.1.4.1.1.7 | Hex8 | RW | |
column · Hex8 · read-write · current The prefix that a user types to control the current session. The default value is hex 01, which corresponds to Ctrl-a (^a): ^a number-Switches from one session to another, press ^a and then the required session number. For example, ^a 2 would switch you to session 2. Pressing ^a 0 will return you to the Device Server Menu. ^a n-Display the next session. The current session will remain active. ^a p-Display the previous session. The current session will remain active. ^a m-To exit a session and return to the Device Server. You will be returned to where you left off. The session will be left running. ^a l-(Lowercase L) Locks the line until the user unlocks it. The user is prompted for a password and locks the line. Next, the user must retype the password to unlock the line. ^r-Redraws the screen. | ||||
| CuserPhoneNumber | 1.3.6.1.4.1.1966.12.1.4.1.1.8 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The phone number the Device Server will dial to callback the user (you must have set Callback to On). Enter the number without spaces. | ||||
| CuserCallBack | 1.3.6.1.4.1.1966.12.1.4.1.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current When On, enter a phone number for the Device Server to call the user back (the Callback parameter is unrelated to the Line Dial parameter). Note: the Device Server will allow callback only when a user is authenticated. If the protocol over the link does not provide authentication, there will be no callback. Therefore, when the Line Service is set to PPP, you must use either PAP or CHAP, because these protocols provide authentication. The default is Off. The Device Server supports another type of callback, Roaming Callback, which is configurable when the Line Service is set to PPP. | ||||
| CuserIdleTimer | 1.3.6.1.4.1.1966.12.1.4.1.1.10 | Integer32 (0..4294967) | RW | |
column · Integer32 (0..4294967) · read-write · current The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, because there has been no exchange of data within the specified time, the Device Server will close the connection. The default is 0 (zero), meaning that the Idle Timer will not expire (the connection is open permanently). | ||||
| CuserSessionTimer | 1.3.6.1.4.1.1966.12.1.4.1.1.11 | Integer32 (0..4294967) | RW | |
column · Integer32 (0..4294967) · read-write · current The amount of time, in seconds, that the Session Timer will run. Use this timer to forcibly close a user's session (connection). When the Session Timer expires, the Device Server will end the connection. The default is 0 (zero), meaning that the session timer will not expire (the session is open permanently, or until the user logs out). | ||||
| CuserIpHost | 1.3.6.1.4.1.1966.12.1.4.1.1.12 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target host IP address. If 255.255.255.255 is specified in the configuration, the user will be prompted for an IP address or host name. If no IP address is specified, the Host IP value in the Default User configuration will be used. The default is 0.0.0.0. | ||||
| CuserTelnetPort | 1.3.6.1.4.1.1966.12.1.4.1.1.13 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The TCP port number for the Telnet session. | ||||
| CuserSSHPort | 1.3.6.1.4.1.1966.12.1.4.1.1.14 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The TCP port number for the SSH session. | ||||
| CuserTcpClearPort | 1.3.6.1.4.1.1966.12.1.4.1.1.15 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The TCP port number for the TCP-Clear or SSL-Raw session. | ||||
| CuserFramedIp | 1.3.6.1.4.1.1966.12.1.4.1.1.16 | IpAddress | RW | |
column · IpAddress · read-write · current Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the address in dot decimal notation as follows: 255.255.255.254 (default)-The Device Server will use the Remote IP Address set in the PPP settings for the line. 255.255.255.255-When the User Service is PPP, the Device Server will allow the remote machine to specify its IP address (overriding the IP address negotiation value configured in the PPP settings). 255.255.255.255-When the User Service is SLIP, the Device Server will use the Remote IP Address set for the line (no negotiation). n.n.n.n-(where n is a number) Enter the IP address of your choice. This IP address will then be used in preference to the Remote IP Address set for a line. | ||||
| CuserSubnetBits | 1.3.6.1.4.1.1966.12.1.4.1.1.17 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current (IPv4 only) If the remote user is on a subnet, enter the number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. | ||||
| CuserIpv6InterfaceIdentifier | 1.3.6.1.4.1.1966.12.1.4.1.1.18 | Ipv6InterfaceId | RW | |
column · Ipv6InterfaceId · read-write · current Used for User Service PPP, sets the IP address of the remote user. Enter the address in IPv6 format. The first 64 bits of the Interface Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the expected format. | ||||
| CuserFramedMtu | 1.3.6.1.4.1.1966.12.1.4.1.1.19 | Integer32 (64..1500) | RW | |
column · Integer32 (64..1500) · read-write · current Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes, being transferred across the link. On noisy links it might be preferable to fragment large packets being transferred over the link, since there will be quicker recovery from errors. Depending on whether you have selected a User Service of SLIP or PPP, details are as follows: PPP-Framed MTU will be the maximum size of packets that the Device Server port will accept. This value is negotiated between the two ends of the link. The valid range is 64-1500. The default is 1500 bytes. SLIP-Framed MTU will be the maximum size of packets being sent by the Device Server. The Device Server will send SLIP packets in the range 256-1006 bytes. The default value is 256 bytes. The Framed MTU value will be used in preference to the MTU/MRU values set for a Line. | ||||
| CuserFramedCompression | 1.3.6.1.4.1.1966.12.1.4.1.1.20 | OnOffValue | RW | |
column · OnOffValue · read-write · current Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is used on the link. VJ compression is a means of reducing the standard TCP/IP header from 40 octets to approximately 5 octets. This gives a significant performance improvement, particularly when interactive applications are being used. For example, when the user is typing, a single character can be passed over the link with a 40 octet header attached. VJ Compression has little effect on other types of links, such as FTP, where the packets are much larger. The Framed Compression value will be used in preference to the VJ Compression value set for a Line. The default is Off. | ||||
| CuserRouting | 1.3.6.1.4.1.1966.12.1.4.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the routing mode used for RIP packets on the PPP and SLIP interfaces. Values are: None-RIP packets are neither received nor sent by the Device Server. Send-RIP packets can only be sent by the Device Server. Listen-RIP packets can only be received by the Device Server. Send and Listen-RIP packets are sent and received by the Device Server.
| ||||
| CuserPortConnected | 1.3.6.1.4.1.1966.12.1.4.1.1.22 | Integer32 (-1..2147483647) | RO | |
column · Integer32 (-1..2147483647) · read-only · current Port user is currently connected to. -1 if user not connected | ||||
| CuserSessionTime | 1.3.6.1.4.1.1966.12.1.4.1.1.23 | Integer32 (0..4294967) | RO | |
column · Integer32 (0..4294967) · read-only · current Current User session time. | ||||
| CuserIdleTime | 1.3.6.1.4.1.1966.12.1.4.1.1.24 | Integer32 (0..4294967) | RO | |
column · Integer32 (0..4294967) · read-only · current Current Idle time | ||||
| CuserAllowAccessClusterPorts | 1.3.6.1.4.1.1966.12.1.4.1.1.27 | OnOffValue | RW | |
column · OnOffValue · read-write · current Allow/disallow the user to access to clustering ports. | ||||
| CuserHost | 1.3.6.1.4.1.1966.12.1.4.1.1.28 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the host. | ||||
| CuserTunnel | 1.3.6.1.4.1.1966.12.1.4.1.1.29 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the user's host. | ||||
| TportAccessTable | 1.3.6.1.4.1.1966.12.1.4.2 | NA | ||
table · not-accessible · current The port access info table for user. | ||||
| RportAccessEntry | 1.3.6.1.4.1.1966.12.1.4.2.1 | NA | ||
row · not-accessible · current An entry in the portAccessTable, each relating to a user's access privileges for a serial port. | ||||
| CportAccessUserIndex | 1.3.6.1.4.1.1966.12.1.4.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The index for the user entry that port access applies to. | ||||
| CportAccessPortIndex | 1.3.6.1.4.1.1966.12.1.4.2.1.2 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number that user access applies to. | ||||
| CportAccessStatus | 1.3.6.1.4.1.1966.12.1.4.2.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportRWAccessAllowed | 1.3.6.1.4.1.1966.12.1.4.2.1.4 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read write access to the port. | ||||
| CportRIAccessAllowed | 1.3.6.1.4.1.1966.12.1.4.2.1.5 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read input access to the port. | ||||
| CportROAccessAllowed | 1.3.6.1.4.1.1966.12.1.4.2.1.6 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read output access to the port. | ||||
| TuserSessionTable | 1.3.6.1.4.1.1966.12.1.4.3 | NA | ||
table · not-accessible · current user. | ||||
| RuserSessionEntry | 1.3.6.1.4.1.1966.12.1.4.3.1 | NA | ||
row · not-accessible · current An entry in the userEntry, each relating to a user. | ||||
| CuserSessionUserIndex | 1.3.6.1.4.1.1966.12.1.4.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The user number. | ||||
| CuserSessionNumber | 1.3.6.1.4.1.1966.12.1.4.3.1.2 | Integer32 (1..4) | NA | |
column · Integer32 (1..4) · not-accessible · current The session number. | ||||
| CuserSessionStatus | 1.3.6.1.4.1.1966.12.1.4.3.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CuserSessionType | 1.3.6.1.4.1.1966.12.1.4.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The type of session for this session number for this user.
| ||||
| CuserSessionAuto | 1.3.6.1.4.1.1966.12.1.4.3.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specify whether or not the session(s) will start automatically when the user logs into the Device Server. | ||||
| CuserSessionTelnetPort | 1.3.6.1.4.1.1966.12.1.4.3.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current For Telnet sessions, the TCP port number the target host is listening on for incoming connections. | ||||
| CuserSessionTelnetHost | 1.3.6.1.4.1.1966.12.1.4.3.1.7 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CuserSessionTelnetTermType | 1.3.6.1.4.1.1966.12.1.4.3.1.8 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Type of terminal attached to this line; for example, ANSI or WYSE60. | ||||
| CuserSessionTelnetEcho | 1.3.6.1.4.1.1966.12.1.4.3.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient for entering text that should not be displayed on the screen, such as passwords. This parameter can only be used when Line Mode is On. Default is Off. | ||||
| CuserSessionTelnetMapnl | 1.3.6.1.4.1.1966.12.1.4.3.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current Maps carriage returns (CR) to carriage return line feed (CRLF). Default is Off. | ||||
| CuserSessionTelnetMode | 1.3.6.1.4.1.1966.12.1.4.3.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off. | ||||
| CuserSessionTelnetInterrupt | 1.3.6.1.4.1.1966.12.1.4.3.1.12 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII value ^C). | ||||
| CuserSessionTelnetQuit | 1.3.6.1.4.1.1966.12.1.4.3.1.13 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the quit character. Typing the quit character closes and exits the current Telnet session. This value is in hexadecimal with a default value of 1c (ASCII value FS). | ||||
| CuserSessionTelnetEOF | 1.3.6.1.4.1.1966.12.1.4.3.1.14 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. This value is in hexadecimal with a default value of 4 (ASCII value ^D). | ||||
| CuserSessionTelnetErase | 1.3.6.1.4.1.1966.12.1.4.3.1.15 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (ASCII value ^H). | ||||
| CuserSessionTelnetEchoCC | 1.3.6.1.4.1.1966.12.1.4.3.1.16 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is in hexadecimal with a default value of 5 (ASCII value ^E). | ||||
| CuserSessionTelnetBreak | 1.3.6.1.4.1.1966.12.1.4.3.1.17 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS). | ||||
| CuserSessionSSHPort | 1.3.6.1.4.1.1966.12.1.4.3.1.18 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The target host TCP port number. | ||||
| CuserSessionSSHHost | 1.3.6.1.4.1.1966.12.1.4.3.1.19 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host that the user will automatically connect to via SSH after a successful login. | ||||
| CuserSessionSSHTermType | 1.3.6.1.4.1.1966.12.1.4.3.1.20 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The type of terminal that will connecting via SSH. | ||||
| CuserSessionSSHVerbose | 1.3.6.1.4.1.1966.12.1.4.3.1.21 | OnOffValue | RW | |
column · OnOffValue · read-write · current Displays debug messages on the terminal. | ||||
| CuserSessionSSHCompression | 1.3.6.1.4.1.1966.12.1.4.3.1.22 | OnOffValue | RW | |
column · OnOffValue · read-write · current Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. | ||||
| CuserSessionSSHAutoLogin | 1.3.6.1.4.1.1966.12.1.4.3.1.23 | OnOffValue | RW | |
column · OnOffValue · read-write · current Creates an automatic SSH login, using the Name and Password values. | ||||
| CuserSessionSSHName | 1.3.6.1.4.1.1966.12.1.4.3.1.24 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The name of the user logging into the SSH session. | ||||
| CuserSessionSSHProtocol | 1.3.6.1.4.1.1966.12.1.4.3.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current Specify the SSH client version that will be used for the SSH session.
| ||||
| CuserSessionSSHRSA | 1.3.6.1.4.1.1966.12.1.4.3.1.26 | OnOffValue | RW | |
column · OnOffValue · read-write · current An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session. | ||||
| CuserSessionSSHDSA | 1.3.6.1.4.1.1966.12.1.4.3.1.27 | OnOffValue | RW | |
column · OnOffValue · read-write · current An authentication method used by SSH version 2. Use DSA authentication for the SSH session. | ||||
| CuserSessionSSHKeyboard | 1.3.6.1.4.1.1966.12.1.4.3.1.28 | OnOffValue | RW | |
column · OnOffValue · read-write · current The user types in a password for authentication. | ||||
| CuserSessionSSHCipherSSH1 | 1.3.6.1.4.1.1966.12.1.4.3.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish
| ||||
| CuserSessionSSHFirstSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHSecondSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHThirdSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHFourthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHFifthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.34 | INTEGER | RW | |
column · INTEGER · read-write · current Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionRloginHost | 1.3.6.1.4.1.1966.12.1.4.3.1.35 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CuserSessionRloginTermType | 1.3.6.1.4.1.1966.12.1.4.3.1.36 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Type of terminal attached to this line; for example, ansi or wyse60. | ||||
| CuserSessionTelnetTunnelName | 1.3.6.1.4.1.1966.12.1.4.3.1.37 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the Telnet service. | ||||
| CuserSessionSSHTunnelName | 1.3.6.1.4.1.1966.12.1.4.3.1.38 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the SSH service. | ||||
| CuserSessionRloginTunnelName | 1.3.6.1.4.1.1966.12.1.4.3.1.39 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the Rlogin service. | ||||
| CuserSessionStrictHostKeyChecking | 1.3.6.1.4.1.1966.12.1.4.3.1.40 | OnOffValue | RW | |
column · OnOffValue · read-write · current When set, the device server must have a host key loaded. | ||||
| CuserSessionSSHSixthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHSeventhSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CuserSessionSSHEighthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.4.3.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| NportInfo | 1.3.6.1.4.1.1966.12.1.5 | |||
| TportTable | 1.3.6.1.4.1.1966.12.1.5.1 | NA | ||
table · not-accessible · current The port configuration table. | ||||
| RportEntry | 1.3.6.1.4.1.1966.12.1.5.1.1 | NA | ||
row · not-accessible · current An entry in the port configuration table, each relating to a serial port.
| ||||
| CportIndex | 1.3.6.1.4.1.1966.12.1.5.1.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Serial Port Index. Valid values are 1 to maximum port number the Device Server supports | ||||
| CportStatus | 1.3.6.1.4.1.1966.12.1.5.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportName | 1.3.6.1.4.1.1966.12.1.5.1.1.3 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current Provide a name for the line so it can be easily identified. | ||||
| CportService | 1.3.6.1.4.1.1966.12.1.5.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the Line Service, which determines how the line will be used. USB ports can only be configured to reverseraw(4),reversessh(11),,reversetelnet(8), bidirectionalmodem(5), trueport(25),customapp(23)
| ||||
| CportDial | 1.3.6.1.4.1.1966.12.1.5.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Determines how a modem will work on the line. If your user is remote and will be dialing in via modem or ISDN TA, set this parameter to In; if the Device Server is being used as a router, set this parameter to either In, Out, or Both, depending on which end of the link your Device Server is situated and how you want to initiate the communication.
| ||||
| CportModem | 1.3.6.1.4.1.1966.12.1.5.1.1.6 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The name of the predefined modem that is used on this line. | ||||
| CportPhone | 1.3.6.1.4.1.1966.12.1.5.1.1.7 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The phone number to use when Dial is set to Out. | ||||
| CportTermType | 1.3.6.1.4.1.1966.12.1.5.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the type of terminal connected to the line: Dumb, WYSE60, VT100, ANSI, TVI925, IBM3151TE, VT320 (specifically supporting VT320-7), HP700 (specifically supporting HP700/44), Term1, Term2, Term3 (user defined terminals)
| ||||
| CportPages | 1.3.6.1.4.1.1966.12.1.5.1.1.9 | Integer32 (1..7) | RW | |
column · Integer32 (1..7) · read-write · current For DSLogin line service, this is the number of video pages the terminal supports. Valid values are 1-7. The default is 5 pages. | ||||
| CportPreDefinedUser | 1.3.6.1.4.1.1966.12.1.5.1.1.10 | DisplayString (SIZE (0..16)) | RW | |
column · DisplayString (SIZE (0..16)) · read-write · current For DSLogin line service, makes this a line that is dedicated to the specified user. Only this user will be able to log in on this line and they won't need to enter their login name - just their password. | ||||
| CportDSPort | 1.3.6.1.4.1.1966.12.1.5.1.1.11 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The Device Server port number. | ||||
| CportIdleTimer | 1.3.6.1.4.1.1966.12.1.5.1.1.12 | Integer32 (0..4294967) | RW | |
column · Integer32 (0..4294967) · read-write · current Enter a time period, in seconds, for which the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, the Device Server will end the connection. The maximum value is 4294967 seconds (about 49 days). The default value of 0 (zero) means the Idle Timer will not expire, so the connection is permanently open. | ||||
| CportSessionTimer | 1.3.6.1.4.1.1966.12.1.5.1.1.13 | Integer32 (0..4294967) | RW | |
column · Integer32 (0..4294967) · read-write · current Enter a time, in seconds, for which the Session Timer will run. Use this timer to forcibly close the session (connection). When the Session Timer expires, the Device Server will end the connection. The default value is 0 seconds so the port will never timeout. The maximum value is 4294967 seconds (about 49 days). | ||||
| CportSecurity | 1.3.6.1.4.1.1966.12.1.5.1.1.14 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables login/password authentication, locally or externally, on reverse Telnet connections. The default is Off. | ||||
| CportBreak | 1.3.6.1.4.1.1966.12.1.5.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies how a break is interpreted: None-The Device Server ignores the break key completely and it is not passed through to the host. This is the default setting. Local-The Device Server deals with the break locally. If the user is in a session, the break key has the same effect as a hot key. Remote-When the break key is pressed, the Device Server translates this into a telnet break signal which it sends to the host machine. Brkintr-On some systems such as SunOS, XENIX, and AIX, a break received from the peripheral is not passed to the client properly. If the client wishes to make the break act like an interrupt key (for example, when the stty options -ignbrk and brkintr are set)
| ||||
| CportInboundFlowControl | 1.3.6.1.4.1.1966.12.1.5.1.1.16 | OnOffValue | RW | |
column · OnOffValue · read-write · current Determines if input flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both. | ||||
| CportOutboundFlowControl | 1.3.6.1.4.1.1966.12.1.5.1.1.17 | OnOffValue | RW | |
column · OnOffValue · read-write · current Determines if output flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both. | ||||
| CportInitialMode | 1.3.6.1.4.1.1966.12.1.5.1.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the initial interface a user navigates when logging into the line; either the Menu or a prompt for the CLI. The default is CLI.
| ||||
| CportReset | 1.3.6.1.4.1.1966.12.1.5.1.1.19 | OnOffValue | RW | |
column · OnOffValue · read-write · current Resets the terminal type connected to the line when a user logs out. | ||||
| CportKeepalive | 1.3.6.1.4.1.1966.12.1.5.1.1.20 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active OR causing a dropped connection condition to be recognized by the reverse raw service. Applications using this feature need to be aware that there might be some considerable delay between a network disconnection and the port being available for the next connection attempt; this is to allow any data sent on prior connections to be transmitted out of the serial port buffer. Application network retry logic needs to accommodate this feature. | ||||
| CportMapCR | 1.3.6.1.4.1.1966.12.1.5.1.1.21 | OnOffValue | RW | |
column · OnOffValue · read-write · current Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off. | ||||
| CportMOTD | 1.3.6.1.4.1.1966.12.1.5.1.1.22 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables the message of the day on the line. | ||||
| CportHotKeyPrefix | 1.3.6.1.4.1.1966.12.1.5.1.1.23 | Hex8 | RW | |
column · Hex8 · read-write · current The prefix that a user types to lock a line or redraw the Menu. The default value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b), etc.): ^a l-(Lowercase L) Locks the line until the user unlocks it. The user is prompted for a password (any password, excluding spaces) and locks the line. Next, the user must retype the password to unlock the line. ^r-When you switch from a session back to the Menu, the screen may not be redrawn correctly. If this happens, use this command to redraw it properly. You can use the Hotkey Prefix key to lock a line only when the Line Lock parameter is On. | ||||
| CportLock | 1.3.6.1.4.1.1966.12.1.5.1.1.24 | OnOffValue | RW | |
column · OnOffValue · read-write · current When enabled, the user can lock his terminal with a password using the Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The Device Server prompts the user for a password and a confirmation. | ||||
| CportEnable | 1.3.6.1.4.1.1966.12.1.5.1.1.25 | OnOffValue | RW | |
column · OnOffValue · read-write · current Is the Port Enabled. This field is not available on 1-port units. | ||||
| CportMultiSession | 1.3.6.1.4.1.1966.12.1.5.1.1.26 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The number of Multisessions allowed on this port | ||||
| CportDialRetries | 1.3.6.1.4.1.1966.12.1.5.1.1.27 | Integer32 (0..99) | RW | |
column · Integer32 (0..99) · read-write · current The number of Dial Retries. | ||||
| CportDialTimeout | 1.3.6.1.4.1.1966.12.1.5.1.1.28 | Integer32 (1..99) | RW | |
column · Integer32 (1..99) · read-write · current The timeout value when dialing in seconds. | ||||
| CportInternetAddress | 1.3.6.1.4.1.1966.12.1.5.1.1.29 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The Internet address of this port. | ||||
| CportRawOption | 1.3.6.1.4.1.1966.12.1.5.1.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the multihost Service and direct connection initiate mode
| ||||
| CportDirectTrigger | 1.3.6.1.4.1.1966.12.1.5.1.1.31 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the direct connection initiate char | ||||
| CportDataLogging | 1.3.6.1.4.1.1966.12.1.5.1.1.32 | OnOffValue | RW | |
column · OnOffValue · read-write · current When on, serial data will be buffered if the TCP connection is lost. When the TCP connection is re-established, the buffered serial data will be sent to its destination (this option is not available when Monitor DSR, Monitor DCD, or Multihost is enabled). The data buffer is 4K for desktop models and 32K for rack mount models. If the data buffer is filled, incoming serial data will overwrite the oldest data. The default is off. | ||||
| CportSacSupport | 1.3.6.1.4.1.1966.12.1.5.1.1.33 | OnOffValue | RW | |
column · OnOffValue · read-write · current When on, a user can access SAC (the interface of the Microsoft Emergency Management Systems utility) through EasyPort Web when the device server's serial port is connected to a Microsoft Server 2003 or Microsoft Server 2008 host. The default is off. | ||||
| CportSendName | 1.3.6.1.4.1.1966.12.1.5.1.1.34 | OnOffValue | RW | |
column · OnOffValue · read-write · current Send the port name on connect. Applies to direct raw, silent raw, and TruePort (server-initiated) srevice types. | ||||
| CportConnectInitiateString | 1.3.6.1.4.1.1966.12.1.5.1.1.35 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current String to be sent when connection is initiated. | ||||
| CportConnectTerminateString | 1.3.6.1.4.1.1966.12.1.5.1.1.36 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current String to be sent when connection is terminated. | ||||
| CportConnectStringDelay | 1.3.6.1.4.1.1966.12.1.5.1.1.37 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The delay after sending the connect or terminate string, in milliseconds | ||||
| CportBreakLength | 1.3.6.1.4.1.1966.12.1.5.1.1.38 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current Amount of time, in milliseconds, to send a break signal (tunnel service only) | ||||
| CportBreakDelay | 1.3.6.1.4.1.1966.12.1.5.1.1.39 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The delay, in milliseconds, after sending a break signal (tunnel service only) | ||||
| TportHdwTable | 1.3.6.1.4.1.1966.12.1.5.2 | NA | ||
table · not-accessible · current Port. | ||||
| RportHdwEntry | 1.3.6.1.4.1.1966.12.1.5.2.1 | NA | ||
row · not-accessible · current An entry in the portHdwEntry, each relating to a port.
| ||||
| CportHdwIndex | 1.3.6.1.4.1.1966.12.1.5.2.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Port hardware Index | ||||
| CportHdwStatus | 1.3.6.1.4.1.1966.12.1.5.2.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportHdwInterface | 1.3.6.1.4.1.1966.12.1.5.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the type of line that is being used with the Device Server. Select either EIA-232, EIA-422, or EIA-485.
| ||||
| CportHdwSpeed | 1.3.6.1.4.1.1966.12.1.5.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the baud rate of the line; keep in mind that speed is affected by the length of the cable. When bCustom is set, then the baud rate is specified by portHwdCustomSpeed. Internal modems only support the following baud rates: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, and 28800.
| ||||
| CportHdwDataBits | 1.3.6.1.4.1.1966.12.1.5.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the number of bits in a byte. The default is 8. Internal modems only support 7 and 8 data bits.
| ||||
| CportHdwParity | 1.3.6.1.4.1.1966.12.1.5.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies if you are using Even, Odd, or No parity on the line. If you want to force a parity type, you can specify Mark for 1 or Space for 0.
| ||||
| CportHdwStopBits | 1.3.6.1.4.1.1966.12.1.5.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the number of stop bits that follow a byte. Certain models do not support 1.5 stop bits. Internal modems only support 1 stop bit.
| ||||
| CportHdwFlowControl | 1.3.6.1.4.1.1966.12.1.5.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Defines whether the data flow is handled by the software (Soft), hardware (Hard), Both, or None.
| ||||
| CportHdwMonitorDSR | 1.3.6.1.4.1.1966.12.1.5.2.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether the RS-232 signal DSR (Data Set Ready) should be monitored, for Device Servers with a DTE serial interface. On a Device Server with a DCE serial interface, this object specifies whether the DTR (Data Terminal Ready) signal should be monitored. For DTE interfaces, this is used with modems or any device that sends a DSR signal. When it is monitored and the Device Server detects a DSR signal, the line service is started. Default is Off. If both Monitor DCD and Monitor DSR are enabled, both signals must be detected before the line service is started. For DCE interfaces, this is used with terminals or other devices that output a DTR signal. This value cannot be changed for internal modems. | ||||
| CportHdwMonitorDCD | 1.3.6.1.4.1.1966.12.1.5.2.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether the RS-232 signal DCD (Data Carrier Detect) should be monitored. This object does not apply to DCE serial interfaces. This is used with modems or any other device that sends a DCD signal. When it is monitored and the Device Server detects a DCD signal, the line service is started. Default is Off. If both Monitor DCD and Monitor DSR are enabled, both signals must be detected before the line service is started. | ||||
| CportHdwDuplex | 1.3.6.1.4.1.1966.12.1.5.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether the line is Full Duplex (communication both ways at the same time) or Half Duplex (communication in one direction at a time).
| ||||
| CportHdwTXDriverControl | 1.3.6.1.4.1.1966.12.1.5.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Used with a EIA-485 serial interface, if your application supports RTS (Request To Send), select this option. Otherwise, select Auto. Default is Auto
| ||||
| CportHdwEchoSuppression | 1.3.6.1.4.1.1966.12.1.5.2.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current This parameter applies only to EIA-485 Half Duplex mode. All characters will be echoed to the user and transmitted across the serial ports. Some EIA-485 applications require local echo to be enabled in order to monitor the loopback data to determine that line contention has occurred. If your application cannot handle loopback data, echo suppression should be On. The default is echo suppression Off. | ||||
| CportHdwUART | 1.3.6.1.4.1.1966.12.1.5.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current portHdwUART
| ||||
| CportHdwIRQ | 1.3.6.1.4.1.1966.12.1.5.2.1.15 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Port Hardware IRQ | ||||
| CportHdwTxBytes | 1.3.6.1.4.1.1966.12.1.5.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwTxBytes | ||||
| CportHdwRxBytes | 1.3.6.1.4.1.1966.12.1.5.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwRxBytes | ||||
| CportHdwFrameErrs | 1.3.6.1.4.1.1966.12.1.5.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwFrameErrs | ||||
| CportHdwParityErrs | 1.3.6.1.4.1.1966.12.1.5.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwParityErrs | ||||
| CportHdwBreaks | 1.3.6.1.4.1.1966.12.1.5.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwBreaks | ||||
| CportHdwOverruns | 1.3.6.1.4.1.1966.12.1.5.2.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current portHdwOverruns | ||||
| CportHdwRTS | 1.3.6.1.4.1.1966.12.1.5.2.1.22 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwRTS | ||||
| CportHdwCTS | 1.3.6.1.4.1.1966.12.1.5.2.1.23 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwCTS | ||||
| CportHdwDTR | 1.3.6.1.4.1.1966.12.1.5.2.1.24 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwDTR | ||||
| CportHdwDSR | 1.3.6.1.4.1.1966.12.1.5.2.1.25 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwDSR | ||||
| CportHdwCD | 1.3.6.1.4.1.1966.12.1.5.2.1.26 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwCD | ||||
| CportHdwRI | 1.3.6.1.4.1.1966.12.1.5.2.1.27 | OnOffValue | RO | |
column · OnOffValue · read-only · current portHdwRI | ||||
| CportSoftTermination | 1.3.6.1.4.1.1966.12.1.5.2.1.29 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables or disables software line termination. | ||||
| CportHdwCustomSpeed | 1.3.6.1.4.1.1966.12.1.5.2.1.30 | Integer32 (50..1843200) | RW | |
column · Integer32 (50..1843200) · read-write · current The custom baud rate for this port. | ||||
| CportHdwDiscardCharactersRecievedWithErrors | 1.3.6.1.4.1.1966.12.1.5.2.1.31 | OnOffValue | RW | |
column · OnOffValue · read-write · current This option if set will discard any characters recieved on the uart that have overrun, framing or parity errors. If not set, then the characters are sent out the network connection | ||||
| CportHdwRtsToggle | 1.3.6.1.4.1.1966.12.1.5.2.1.32 | OnOffValue | RW | |
column · OnOffValue · read-write · current This option if set will toggle RTS on before transmitting the first character and toggle RTS off after transmitting the last character. | ||||
| CportHdwRtsInitialDelay | 1.3.6.1.4.1.1966.12.1.5.2.1.33 | Integer32 (0..1000) | RW | |
column · Integer32 (0..1000) · read-write · current The delay, in msec, between turning RTS on and transmittng the first character. | ||||
| CportHdwRtsFinalDelay | 1.3.6.1.4.1.1966.12.1.5.2.1.34 | Integer32 (0..1000) | RW | |
column · Integer32 (0..1000) · read-write · current The delay, in msec, between transmitting the last character and turning RTS off. | ||||
| CportHdwDataEquipment | 1.3.6.1.4.1.1966.12.1.5.2.1.35 | Integer | RW | |
column · Integer · read-write · current This option if set will toggle between Data Terminal Equipment (DTE) Rolled and Data Communication Equipment (DCE) Straight.
| ||||
| CportHdwSlot | 1.3.6.1.4.1.1966.12.1.5.2.1.36 | Integer | RO | |
column · Integer · read-only · current Slot hardware available.
portHdwSlot.1 (ports 1 - 16)
portHdwSlot.2 (ports 17- 32)
portHdwSlot.3 (ports 33- 48)
| ||||
| TportTelnetTable | 1.3.6.1.4.1.1966.12.1.5.3 | NA | ||
table · not-accessible · current Port Telnet Table. | ||||
| RportTelnetEntry | 1.3.6.1.4.1.1966.12.1.5.3.1 | NA | ||
row · not-accessible · current An entry in the portTelnetEntry, each relating to a port.
| ||||
| CportTelnetIndex | 1.3.6.1.4.1.1966.12.1.5.3.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portTelnetIndex | ||||
| CportTelnetStatus | 1.3.6.1.4.1.1966.12.1.5.3.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportTelnetPort | 1.3.6.1.4.1.1966.12.1.5.3.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. Default is 23. | ||||
| CportTelnetHost | 1.3.6.1.4.1.1966.12.1.5.3.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportTelnetTermType | 1.3.6.1.4.1.1966.12.1.5.3.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Type of terminal attached to this line; for example, ANSI or WYSE60. | ||||
| CportTelnetEcho | 1.3.6.1.4.1.1966.12.1.5.3.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient for entering text that should not be displayed on the screen, such as passwords. This parameter can only be used when Line Mode is On. Default is Off. | ||||
| CportTelnetMapnl | 1.3.6.1.4.1.1966.12.1.5.3.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off. | ||||
| CportTelnetMode | 1.3.6.1.4.1.1966.12.1.5.3.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off. | ||||
| CportTelnetInterrupt | 1.3.6.1.4.1.1966.12.1.5.3.1.9 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII value ^C). | ||||
| CportTelnetQuit | 1.3.6.1.4.1.1966.12.1.5.3.1.10 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the quit character. Typing the quit character closes and exits the current telnet session. This value is in hexadecimal with a default value of 1c (ASCII value FS). | ||||
| CportTelnetEOF | 1.3.6.1.4.1.1966.12.1.5.3.1.11 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. This value is in hexadecimal with a default value of 4 (ASCII value ^D). | ||||
| CportTelnetErase | 1.3.6.1.4.1.1966.12.1.5.3.1.12 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (ASCII value ^H). | ||||
| CportTelnetEchoCC | 1.3.6.1.4.1.1966.12.1.5.3.1.13 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is in hexadecimal with a default value of 5 (ASCII value ^E). | ||||
| CportTelnetBreak | 1.3.6.1.4.1.1966.12.1.5.3.1.14 | Hex8 | RW | |
column · Hex8 · read-write · current Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS). | ||||
| CportTelnetTunnelName | 1.3.6.1.4.1.1966.12.1.5.3.1.15 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportSSHTable | 1.3.6.1.4.1.1966.12.1.5.4 | NA | ||
table · not-accessible · current Port SSH Table. | ||||
| RportSSHEntry | 1.3.6.1.4.1.1966.12.1.5.4.1 | NA | ||
row · not-accessible · current An entry in the portSSHEntry, each relating to a port.
| ||||
| CportSSHIndex | 1.3.6.1.4.1.1966.12.1.5.4.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portSSHIndex | ||||
| CportSSHStatus | 1.3.6.1.4.1.1966.12.1.5.4.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportSSHPort | 1.3.6.1.4.1.1966.12.1.5.4.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. The default is port 22. | ||||
| CportSSHHost | 1.3.6.1.4.1.1966.12.1.5.4.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportSSHTermType | 1.3.6.1.4.1.1966.12.1.5.4.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The type of terminal that will connecting via SSH. | ||||
| CportSSHVerbose | 1.3.6.1.4.1.1966.12.1.5.4.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current Displays debug messages on the terminal. | ||||
| CportSSHCompression | 1.3.6.1.4.1.1966.12.1.5.4.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks | ||||
| CportSSHAutoLogin | 1.3.6.1.4.1.1966.12.1.5.4.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Creates an automatic SSH login, using the Name and Password values. | ||||
| CportSSHName | 1.3.6.1.4.1.1966.12.1.5.4.1.9 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The name of the user logging into the SSH session. | ||||
| CportSSHProtocol | 1.3.6.1.4.1.1966.12.1.5.4.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Specify the SSH client version that will be used for the SSH session.
| ||||
| CportSSHRSA | 1.3.6.1.4.1.1966.12.1.5.4.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session. | ||||
| CportSSHDSA | 1.3.6.1.4.1.1966.12.1.5.4.1.12 | OnOffValue | RW | |
column · OnOffValue · read-write · current An authentication method used by SSH version 2. Use DSA authentication for the SSH session. | ||||
| CportSSHKeyboard | 1.3.6.1.4.1.1966.12.1.5.4.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current The user types in a password for authentication. | ||||
| CportSSHCipherSSH1 | 1.3.6.1.4.1.1966.12.1.5.4.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish
| ||||
| CportSSHFirstSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHSecondSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHThirdSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHFourthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHFifthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHTunnelName | 1.3.6.1.4.1.1966.12.1.5.4.1.20 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| CportSSHStrictHostKeyChecking | 1.3.6.1.4.1.1966.12.1.5.4.1.21 | OnOffValue | RW | |
column · OnOffValue · read-write · current When set, the device server must have a host key loaded. | ||||
| CportSSHSixthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHSeventhSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| CportSSHEighthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.5.4.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305
| ||||
| TportPPPTable | 1.3.6.1.4.1.1966.12.1.5.5 | NA | ||
table · not-accessible · current Port PPP Table. | ||||
| RportPPPEntry | 1.3.6.1.4.1.1966.12.1.5.5.1 | NA | ||
row · not-accessible · current An entry in the portPPPEntry, each relating to a port.
| ||||
| CportPPPIndex | 1.3.6.1.4.1.1966.12.1.5.5.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portPPPIndex | ||||
| CportPPPStatus | 1.3.6.1.4.1.1966.12.1.5.5.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportPPPLocalIpAddr | 1.3.6.1.4.1.1966.12.1.5.5.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The IPv4 IP address of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is part of the same network or subnetwork as the remote end; for example, if the remote end is address 192.101.34.146, your local IP address can be 192.101.34.145. Do not use the Device Server's (main) IP address in this field; if you do so, routing will not take place correctly. | ||||
| CportPPPRemoteIpAddr | 1.3.6.1.4.1.1966.12.1.5.5.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The IPv4 IP address of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. If you set the PPP parameter IP Address Negotiation to On, the Device Server will ignore the remote IP address value you enter here and will allow the remote end to specify its IP address. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Address is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. The exception to this rule is a Framed-Address value in the RADIUS file of 255.255.255.254; this value allows the Device Server to use the remote IP address value configured here. | ||||
| CportPPPSubnetBits | 1.3.6.1.4.1.1966.12.1.5.5.1.5 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Netmask is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportPPPIpV6LocalIpAddr | 1.3.6.1.4.1.1966.12.1.5.5.1.6 | Ipv6InterfaceId | RW | |
column · Ipv6InterfaceId · read-write · current The local IPv6 interface identifier of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is part of the same network or subnetwork as the remote end. Do not use the Device Server's (main) IP address in this field; if you do so, routing will not take place correctly. The first 64 bits of the Interface Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the expected format. | ||||
| CportPPPIpV6RemoteIpAddr | 1.3.6.1.4.1.1966.12.1.5.5.1.7 | Ipv6InterfaceId | RW | |
column · Ipv6InterfaceId · read-write · current The remote IPv6 interface identifier of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. If you set the PPP parameter IP Address Negotiation to On, the Device Server will ignore the remote IP address value you enter here and will allow the remote end to specify its IP address. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Interface-ID is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. The first 64 bits of the Interface Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the expected format. | ||||
| CportPPPAccm | 1.3.6.1.4.1.1966.12.1.5.5.1.8 | Hex32 | RW | |
column · Hex32 · read-write · current Specifies the ACCM (Asynchronous Control Character Map) characters that should be escaped from the data stream. This is entered as a 32-bit hexadecimal number with each bit specifying whether or not the corresponding character should be escaped. The bits are specified as the most significant bit first and are numbered 31-0. Thus if bit 17 is set, the 17th character should be escaped, that is, 0x11 (XON). So entering the value 000a0000 will cause the control characters 0x11 (XON) and 0x13 (XOFF) to be escaped on the link, thus allowing the use of XON/XOFF (software) flow control. If you have selected Soft Flow Control on the Line, you must enter a value of 000a0000 for the ACCM. The default value is 00000000, which means no characters will be escaped. | ||||
| CportPPPMru | 1.3.6.1.4.1.1966.12.1.5.5.1.9 | Integer32 (64..1500) | RW | |
column · Integer32 (64..1500) · read-write · current The Maximum Receive Unit (MRU) parameter specifies the maximum size of PPP packets that the Device Server's port will accept. Enter a value between 64 and 1500 bytes; for example, 512. The default value is 1500. If your user is authenticated by the Device Server, the MRU value will be overridden if you have set a Framed MTU value for the user. If your user is authenticated by RADIUS and the RADIUS parameter Framed-MTU is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportPPPSecurity | 1.3.6.1.4.1.1966.12.1.5.5.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The type of authentication that will be done on the link: None, PAP, or CHAP. The default is CHAP. You can use PAP or CHAP to authenticate a port or user on the Device Server, from a remote location, or authenticate a remote client/device, from the Device Server. PAP is a one time challenge of a client/device requiring that it respond with a valid username and password. A timer operates during which successful authentication must take place. If the timer expires before the remote end has been authenticated successfully, the link will be terminated. CHAP challenges a client/device at regular intervals to validate itself with a username and a response, based on a hash of the secret (password). A timer operates during which successful authentication must take place. If the timer expires before the remote end has been authenticated successfully, the link will be terminated. When setting either PAP and CHAP, make sure the Device Server and the remote client/device have the same setting. For example, if the Device Server is set to PAP, but the remote end is set to CHAP, the connection will be refused.
| ||||
| CportPPPUser | 1.3.6.1.4.1.1966.12.1.5.5.1.11 | DisplayString (SIZE (0..254)) | RW | |
column · DisplayString (SIZE (0..254)) · read-write · current Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote user, who will be authenticated by the Device Server, or you are using the Device Server as a router (back-to-back with another Device Server). When Dial is set to Out or Both, the User is the name the remote device will use to authenticate a port on this Device Server. The remote device will only authenticate your Device Server's port when PAP or CHAP are operating. You can enter a maximum of sixteen alphanumeric characters; for example, tracy201. When connecting together two networks, enter a dummy user name; for example, DS_HQ. Note If you want a reasonable level of security, the user name and password should not be similar to a user name or password used regularly to login to the Device Server. External authentication can not be used for this user. | ||||
| CportPPPRemoteUser | 1.3.6.1.4.1.1966.12.1.5.5.1.12 | DisplayString (SIZE (0..254)) | RW | |
column · DisplayString (SIZE (0..254)) · read-write · current Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote user, who will be authenticated by the Device Server, or you are using the Device Server as a router (back-to-back with another Device Server) When Dial is set to In or Both, the Remote User is the name the Device Server will use to authenticate the port on the remote device. Your Device Server will only authenticate the port on the remote device when PAP or CHAP are operating. You can enter a maximum of sixteen alphanumeric characters. When connecting together two networks, enter a dummy user name; for example, DS_SALES. Note If you want a reasonable level of security, the user name and password should not be similar to a user name or password used regularly to login to the Device Server. This option does not work with external authentication. | ||||
| CportPPPACComp | 1.3.6.1.4.1.1966.12.1.5.5.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current This determines whether compression of the PPP Address and Control fields take place on the link. The default is On. For most applications this should be enabled. | ||||
| CportPPPProtoComp | 1.3.6.1.4.1.1966.12.1.5.5.1.14 | OnOffValue | RW | |
column · OnOffValue · read-write · current This determines whether compression of the PPP Protocol field takes place on this link. The default is On. | ||||
| CportPPPVJComp | 1.3.6.1.4.1.1966.12.1.5.5.1.15 | OnOffValue | RW | |
column · OnOffValue · read-write · current This determines whether Van Jacobson Compression is used on this link. The default is On. If your user is authenticated by the Device Server, this VJ compression value will be overridden if you have set the User Framed Compression On. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Compression is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportPPPMagicNegotiation | 1.3.6.1.4.1.1966.12.1.5.5.1.16 | OnOffValue | RW | |
column · OnOffValue · read-write · current Determines if a line is looping back. If enabled (On), random numbers are sent on the link. The random numbers should be different, unless the link loops back. The default is Off. | ||||
| CportPPPIPAddrNegotiation | 1.3.6.1.4.1.1966.12.1.5.5.1.17 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether or not IP address negotiation will take place. IP address negotiation is where the Device Server allows the remote end to specify its IP address. The default value is Off. When On, the IP address specified by the remote end will be used in preference to the Remote IP Address set for a Line. When Off, the Remote IP Address set for the Line will be used. | ||||
| CportPPPCRTimeout | 1.3.6.1.4.1.1966.12.1.5.5.1.18 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a configure request packet to have been lost. | ||||
| CportPPPTRTimeout | 1.3.6.1.4.1.1966.12.1.5.5.1.19 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a terminate request packet to have been lost. | ||||
| CportPPPCRRetry | 1.3.6.1.4.1.1966.12.1.5.5.1.20 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The maximum number of times a configure request packet will be sent before the link is terminated. | ||||
| CportPPPTRRetry | 1.3.6.1.4.1.1966.12.1.5.5.1.21 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The maximum number of times a terminate request packet will be sent before the link is terminated. | ||||
| CportPPPNakRetry | 1.3.6.1.4.1.1966.12.1.5.5.1.22 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The maximum number of times a configure NAK packet will be sent before the link is terminated. | ||||
| CportPPPAuthTimeout | 1.3.6.1.4.1.1966.12.1.5.5.1.23 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The timeout, in seconds, during which successful PAP or CHAP authentication must take place (when PAP or CHAP is turned On). If the timer expires before the remote end has been authenticated successfully, the link will be terminated. | ||||
| CportPPPRoamingCallback | 1.3.6.1.4.1.1966.12.1.5.5.1.24 | OnOffValue | RW | |
column · OnOffValue · read-write · current A user can enter a telephone number that the Device Server will use to callback him/her. This feature is particularly useful for a mobile user. Roaming callback can only work when the User Callback parameter is set to On. Roaming callback therefore overrides (fixed) User Callback.To use Roaming Callback, the remote end must be a Microsoft Windows OS that supports Microsoft's Callback Control Protocol (CBCP). The user is allowed 30 seconds to enter a telephone number after which the Device Server ends the call. The default is Off. | ||||
| CportPPPChallengInterval | 1.3.6.1.4.1.1966.12.1.5.5.1.25 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The interval, in seconds, for which the Device Server will issue a CHAP re-challenge to the remote end. During CHAP authentication, an initial CHAP challenge takes place, and is unrelated to CHAP re-challenges. The initial challenge takes place even if re-challenges are disabled. Some PPP client software does not work with CHAP re-challenges, so you might want to leave the parameter disabled in the Device Server. The default value is 0 (zero), meaning CHAP re-challenge is disabled. | ||||
| CportPPPRouting | 1.3.6.1.4.1.1966.12.1.5.5.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the routing mode (RIP, Routing Information Protocol) used on the PPP interface as one of the following options: None-Disables RIP over the PPP/SLIP interface. Send-Sends RIP over the PPP/SLIP interface. Listen-Listens for RIP over the PPP/SLIP interface. Send and Listen-Sends RIP and listens for RIP over the PPP/SLIP interface. This is the same function as the Framed-Routing attribute for RADIUS authenticated users. Default is None.
| ||||
| CportPPPDynamicDNSEnabled | 1.3.6.1.4.1.1966.12.1.5.5.1.27 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable dynamic DNS. | ||||
| CportPPPDynamicDNSHostname | 1.3.6.1.4.1.1966.12.1.5.5.1.28 | DisplayString (SIZE (1..14)) | RW | |
column · DisplayString (SIZE (1..14)) · read-write · current Host name. | ||||
| CportPPPDynamicDNSUserName | 1.3.6.1.4.1.1966.12.1.5.5.1.29 | DisplayString (SIZE (1..16)) | RW | |
column · DisplayString (SIZE (1..16)) · read-write · current user name. | ||||
| CportPPPDynamicDNSPassword | 1.3.6.1.4.1.1966.12.1.5.5.1.30 | DisplayString (SIZE (1..16)) | RW | |
column · DisplayString (SIZE (1..16)) · read-write · current Password. | ||||
| CportPPPDynamicDNSStatusString | 1.3.6.1.4.1.1966.12.1.5.5.1.31 | OCTET STRING (SIZE (0..1024)) | RW | |
column · OCTET STRING (SIZE (0..1024)) · read-write · current Dynamic DNS Status | ||||
| CportPPPMSDirectConnection | 1.3.6.1.4.1.1966.12.1.5.5.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current Set for Microsoft PPP connection working mode
| ||||
| CportPPPIPv6Prefix | 1.3.6.1.4.1.1966.12.1.5.5.1.33 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current You can optionally specify an IPv6 global network prefix that the Device Server will advertise to the device at the other end of the PPP link. Default: 0:0:0:0 | ||||
| CportPPPIPv6PrefixBits | 1.3.6.1.4.1.1966.12.1.5.5.1.34 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current Specify the prefix bits for the IPv6 global network prefix. Default is 64. | ||||
| CportPPPEchoTimeout | 1.3.6.1.4.1.1966.12.1.5.5.1.35 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current The timeout, in seconds, to wait for an Echo reply. | ||||
| CportPPPEchoRetry | 1.3.6.1.4.1.1966.12.1.5.5.1.36 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The maximum number of Echo reply timeouts before the link is terminated. | ||||
| TportSLIPTable | 1.3.6.1.4.1.1966.12.1.5.6 | NA | ||
table · not-accessible · current Port SLIP Table. | ||||
| RportSLIPEntry | 1.3.6.1.4.1.1966.12.1.5.6.1 | NA | ||
row · not-accessible · current An entry in the portSLIPEntry, each relating to a port.
| ||||
| CportSLIPIndex | 1.3.6.1.4.1.1966.12.1.5.6.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portSLIPIndex | ||||
| CportSlipStatus | 1.3.6.1.4.1.1966.12.1.5.6.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportSLIPLocalIpAddress | 1.3.6.1.4.1.1966.12.1.5.6.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The IPv4 address of the Device Server end of the SLIP link. For routing to work you must enter an IP address in this field. Choose an address that is part of the same network or subnetwork as the remote end; for example, if the remote end is address 192.101.34.146, your local IP address can be 192.101.34.145. Do not use the Device Server's (main) IP address in this field; if you do so, routing will not take place correctly. | ||||
| CportSLIPRemoteIpAddress | 1.3.6.1.4.1.1966.12.1.5.6.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The IPv4 address of the remote end of the SLIP link. Choose an address that is part of the same network or subnetwork as the Device Server. If your user is authenticated by the Device Server, this remote IP address will be overridden if you have set a Framed IP Address for the user. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Address is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportSLIPSubnetBits | 1.3.6.1.4.1.1966.12.1.5.6.1.5 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Netmask is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportSLIPMtu | 1.3.6.1.4.1.1966.12.1.5.6.1.6 | Integer32 (256..1006) | RW | |
column · Integer32 (256..1006) · read-write · current The Maximum Transmission Unit (MTU) parameter restricts the size of individual SLIP packets being sent by the Device Server. Enter a value between 256 and 1006 bytes; for example, 512. The default value is 256. If your user is authenticated by the Device Server, this MTU value will be overridden when you have set a Framed MTU value for the user. If your user is authenticated by RADIUS and the RADIUS parameter Framed-MTU is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportSLIPVJComp | 1.3.6.1.4.1.1966.12.1.5.6.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current This determines whether Van Jacobson compression is used on this link; that is, whether you are using SLIP or C-SLIP (compressed SLIP). The choices are On (C-SLIP) or Off (SLIP). The default is On. C-SLIP greatly improves the performance of interactive traffic, such as Telnet or Rlogin. If your user is authenticated by the Device Server, this VJ compression value will be overridden if you have set a Framed Compression value for a user. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Compression is set in the RADIUS file, the Device Server will use the value in the RADIUS file in preference to the value configured here. | ||||
| CportSLIPRouting | 1.3.6.1.4.1.1966.12.1.5.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the routing mode (RIP, Routing Information Protocol) used on the SLIP interface as one of the following options: None-Disables RIP over the PPP/SLIP interface. Send-Sends RIP over the PPP/SLIP interface. Listen-Listens for RIP over the PPP/SLIP interface. Send and Listen-Sends RIP and listens for RIP over the PPP/SLIP interface. This is the same function as the Framed-Routing attribute for RADIUS authenticated users. Default is None.
| ||||
| TportUDPTable | 1.3.6.1.4.1.1966.12.1.5.7 | NA | ||
table · not-accessible · current Port UDP Table. | ||||
| RportUDPEntry | 1.3.6.1.4.1.1966.12.1.5.7.1 | NA | ||
row · not-accessible · current An entry in the portUDPEntry, each relating to a port. | ||||
| CportUDPIndex | 1.3.6.1.4.1.1966.12.1.5.7.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portUDPIndex | ||||
| CportUDPEntryIndex | 1.3.6.1.4.1.1966.12.1.5.7.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current portUDPNumber | ||||
| CportUDPStatus | 1.3.6.1.4.1.1966.12.1.5.7.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportUDPStartAddress | 1.3.6.1.4.1.1966.12.1.5.7.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server will listen for messages from and/or send messages to | ||||
| CportUDPEndAddress | 1.3.6.1.4.1.1966.12.1.5.7.1.5 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will listen for messages from and/or send messages to. | ||||
| CportUDPPort | 1.3.6.1.4.1.1966.12.1.5.7.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port that the Device Server will use to receive messages from or relay messages to servers/hosts. | ||||
| CportUDPDirection | 1.3.6.1.4.1.1966.12.1.5.7.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The direction in which information is received or relayed: None-UDP service not enabled. In-LAN to serial. Out-Serial to LAN. Both-Messages are relayed both directions.
| ||||
| CportUDPOption | 1.3.6.1.4.1.1966.12.1.5.7.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current when want UDP port be any port which only valid for lan to serial direction set this to 2, others for auto lean UDP port and specific port set this to 1
| ||||
| CportUDPTunnelName | 1.3.6.1.4.1.1966.12.1.5.7.1.9 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportVmodemTable | 1.3.6.1.4.1.1966.12.1.5.8 | NA | ||
table · not-accessible · current Port Vmodem Table. | ||||
| RportVmodemEntry | 1.3.6.1.4.1.1966.12.1.5.8.1 | NA | ||
row · not-accessible · current An entry in the portVmodemEntry, each relating to a port.
| ||||
| CportVmodemIndex | 1.3.6.1.4.1.1966.12.1.5.8.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portVmodemIndex | ||||
| CportVmodemStatus | 1.3.6.1.4.1.1966.12.1.5.8.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportVmodemHost | 1.3.6.1.4.1.1966.12.1.5.8.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The target host name. | ||||
| CportVmodemPort | 1.3.6.1.4.1.1966.12.1.5.8.1.4 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for messages. | ||||
| CportVmodemSuccessString | 1.3.6.1.4.1.1966.12.1.5.8.1.5 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current String that is sent to the serial device when a connection succeeds. If no string is entered, then the string CONNECT will be sent with the connecting speed, for example CONNECT 9600. | ||||
| CportVmodemFailureString | 1.3.6.1.4.1.1966.12.1.5.8.1.6 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current String that is sent to the serial device when a connection fails. If no string is entered, then the string NO CARRIER will be sent. | ||||
| CportVmodemSuppress | 1.3.6.1.4.1.1966.12.1.5.8.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current If set to No, connection success/failure indication strings are sent to the connected device, otherwise these indications are suppressed. | ||||
| CportVmodemStyle | 1.3.6.1.4.1.1966.12.1.5.8.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current One of the following: Verbose-Return codes (strings) are sent to the connected device. Numeric-The following characters can be sent to the connected device: 1 Successfully Connected 2 Failed to Connect 4 Error
| ||||
| CportVmodemResponseDelay | 1.3.6.1.4.1.1966.12.1.5.8.1.9 | Integer32 (0..999) | RW | |
column · Integer32 (0..999) · read-write · current The vmodem delay to response, in milliseconds, default is 250. | ||||
| CportVmodemEcho | 1.3.6.1.4.1.1966.12.1.5.8.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current If set to on, vmodem will echo input. | ||||
| CportVmodemMode | 1.3.6.1.4.1.1966.12.1.5.8.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current In auto mode vmodem will automatically use the host and port make connection, otherwise will wait for use input
| ||||
| CportVmodemDCD | 1.3.6.1.4.1.1966.12.1.5.8.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Define the behavior of DCD
| ||||
| CportVmodemRTS | 1.3.6.1.4.1.1966.12.1.5.8.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Define the behavior of signal RTS
| ||||
| CportVmodemDTR | 1.3.6.1.4.1.1966.12.1.5.8.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Define the behavior of signal DTR
| ||||
| CportVmodemInitString | 1.3.6.1.4.1.1966.12.1.5.8.1.15 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current String that used as initial AT commands. | ||||
| CportVmodemTunnelName | 1.3.6.1.4.1.1966.12.1.5.8.1.16 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportRawTable | 1.3.6.1.4.1.1966.12.1.5.9 | NA | ||
table · not-accessible · current Port Raw Table. | ||||
| RportRawEntry | 1.3.6.1.4.1.1966.12.1.5.9.1 | NA | ||
row · not-accessible · current An entry in the portRawEntry, each relating to a port.
| ||||
| CportRawIndex | 1.3.6.1.4.1.1966.12.1.5.9.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Index of the corresponding serial port. | ||||
| CportRawStatus | 1.3.6.1.4.1.1966.12.1.5.9.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportRawPort | 1.3.6.1.4.1.1966.12.1.5.9.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. | ||||
| CportRawHost | 1.3.6.1.4.1.1966.12.1.5.9.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportRawTunnelName | 1.3.6.1.4.1.1966.12.1.5.9.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportBidirTable | 1.3.6.1.4.1.1966.12.1.5.10 | NA | ||
table · not-accessible · current Port Bidir Table. | ||||
| RportBidirEntry | 1.3.6.1.4.1.1966.12.1.5.10.1 | NA | ||
row · not-accessible · current An entry in the portBidirEntry, each relating to a port.
| ||||
| CportBidirIndex | 1.3.6.1.4.1.1966.12.1.5.10.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portBidirIndex | ||||
| CportBidirStatus | 1.3.6.1.4.1.1966.12.1.5.10.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportBidirPort | 1.3.6.1.4.1.1966.12.1.5.10.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. | ||||
| CportBidirHost | 1.3.6.1.4.1.1966.12.1.5.10.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportBidirTunnelName | 1.3.6.1.4.1.1966.12.1.5.10.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service's target host. | ||||
| TportRloginTable | 1.3.6.1.4.1.1966.12.1.5.11 | NA | ||
table · not-accessible · current Port Rlogin Table. | ||||
| RportRloginEntry | 1.3.6.1.4.1.1966.12.1.5.11.1 | NA | ||
row · not-accessible · current An entry in the portRloginEntry, each relating to a port.
| ||||
| CportRloginIndex | 1.3.6.1.4.1.1966.12.1.5.11.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Index of the corresponding serial port. | ||||
| CportRloginStatus | 1.3.6.1.4.1.1966.12.1.5.11.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportRloginHost | 1.3.6.1.4.1.1966.12.1.5.11.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportRloginTermType | 1.3.6.1.4.1.1966.12.1.5.11.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Type of terminal attached to this line; for example, ANSI or WYSE60. | ||||
| CportRloginTunnelName | 1.3.6.1.4.1.1966.12.1.5.11.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportEmailTable | 1.3.6.1.4.1.1966.12.1.5.12 | NA | ||
table · not-accessible · current Port Email Table. | ||||
| RportEmailEntry | 1.3.6.1.4.1.1966.12.1.5.12.1 | NA | ||
row · not-accessible · current An entry in the portEmailEntry, each relating to a port.
| ||||
| CportEmailIndex | 1.3.6.1.4.1.1966.12.1.5.12.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Index of the corresponding serial port. | ||||
| CportEmailStatus | 1.3.6.1.4.1.1966.12.1.5.12.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportEmailActive | 1.3.6.1.4.1.1966.12.1.5.12.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Determines whether or not email notification is turned on. Default is Off. | ||||
| CportEmailLevel | 1.3.6.1.4.1.1966.12.1.5.12.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Choose the event level that triggers an email notification: Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug. You are selecting the lowest notification level; therefore, when you select Debug, you will get an email notification for all events that trigger a message.
| ||||
| CportEmailTo | 1.3.6.1.4.1.1966.12.1.5.12.1.6 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current An email address or list of email addresses that will receive the email notification. | ||||
| CportEmailFrom | 1.3.6.1.4.1.1966.12.1.5.12.1.7 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current This field can contain an email address that might identify the Device Server name or some other value. | ||||
| CportEmailReply | 1.3.6.1.4.1.1966.12.1.5.12.1.9 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The email address to whom all replies to the email notification should go. | ||||
| CportEmailSubject | 1.3.6.1.4.1.1966.12.1.5.12.1.10 | DisplayString (SIZE (0..48)) | RW | |
column · DisplayString (SIZE (0..48)) · read-write · current A text string, which can contain spaces, that will display in the Subject field of the email notification. | ||||
| CportEmailUseDefaultLevel | 1.3.6.1.4.1.1966.12.1.5.12.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current Inherit 'level' setting from the Server Email Alert. | ||||
| CportEmailUseDefaultTo | 1.3.6.1.4.1.1966.12.1.5.12.1.12 | OnOffValue | RW | |
column · OnOffValue · read-write · current Inherit 'to' setting from the Server Email Alert. | ||||
| CportEmailUseDefaultFrom | 1.3.6.1.4.1.1966.12.1.5.12.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current Inherit 'from' setting from the Server Email Alert. | ||||
| CportEmailUseDefaultReply | 1.3.6.1.4.1.1966.12.1.5.12.1.14 | OnOffValue | RW | |
column · OnOffValue · read-write · current Inherit 'reply' setting from the Server Email Alert. | ||||
| CportEmailUseDefaultSubject | 1.3.6.1.4.1.1966.12.1.5.12.1.15 | OnOffValue | RW | |
column · OnOffValue · read-write · current Inherit 'subject' setting from the Server Email Alert. | ||||
| TportSSLTable | 1.3.6.1.4.1.1966.12.1.5.13 | NA | ||
table · not-accessible · current Port SSL Table. | ||||
| RportSSLEntry | 1.3.6.1.4.1.1966.12.1.5.13.1 | NA | ||
row · not-accessible · current An entry in the portSSLEntry, each relating to a port.
| ||||
| CportSSLIndex | 1.3.6.1.4.1.1966.12.1.5.13.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current port SSL Index | ||||
| CportSSLStatus | 1.3.6.1.4.1.1966.12.1.5.13.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportSSLEnabled | 1.3.6.1.4.1.1966.12.1.5.13.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables SSL. | ||||
| CportSSLuseServer | 1.3.6.1.4.1.1966.12.1.5.13.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Uses the SSL/TLS server configuration for the line. | ||||
| CportSSLVersion | 1.3.6.1.4.1.1966.12.1.5.13.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection will use only TLSv1.
SSLv3-The connection will use only SSLv3.
The default is Any.
| ||||
| CportSSLType | 1.3.6.1.4.1.1966.12.1.5.13.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.
| ||||
| CportSSLVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.5.13.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| CportSSLCountry | 1.3.6.1.4.1.1966.12.1.5.13.1.8 | DisplayString (SIZE (0..2)) | RW | |
column · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| CportSSLStateProv | 1.3.6.1.4.1.1966.12.1.5.13.1.9 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| CportSSLLocality | 1.3.6.1.4.1.1966.12.1.5.13.1.10 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| CportSSLOrganisation | 1.3.6.1.4.1.1966.12.1.5.13.1.11 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| CportSSLOrganisationUnit | 1.3.6.1.4.1.1966.12.1.5.13.1.12 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| CportSSLCommonName | 1.3.6.1.4.1.1966.12.1.5.13.1.13 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| CportSSLEmail | 1.3.6.1.4.1.1966.12.1.5.13.1.14 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| TportPacketForwardingTable | 1.3.6.1.4.1.1966.12.1.5.14 | NA | ||
table · not-accessible · current The port packet forwarding configuration table. | ||||
| RportPacketForwardingEntry | 1.3.6.1.4.1.1966.12.1.5.14.1 | NA | ||
row · not-accessible · current An entry in the port packet forwarding configuration table, each relating to a serial port. | ||||
| CportPacketForwardingIndex | 1.3.6.1.4.1.1966.12.1.5.14.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current Port Index | ||||
| CportPacketForwardingStatus | 1.3.6.1.4.1.1966.12.1.5.14.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportPacketForwardingPacketSize | 1.3.6.1.4.1.1966.12.1.5.14.1.3 | Integer32 (0..1024) | RW | |
column · Integer32 (0..1024) · read-write · current When the size of the packet equals this value the packet is transmitted. 0 - Ignore option | ||||
| CportPacketForwardingIdleTime | 1.3.6.1.4.1.1966.12.1.5.14.1.4 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current When the elapsed time between one character to another character equals this value the packet is transmitted. 0 - Ignore option | ||||
| CportPacketForwardingForceTransmitTime | 1.3.6.1.4.1.1966.12.1.5.14.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current When the elapsed time from the 1st character received equals this value the packet is transmitted. 0 - Ignore option. | ||||
| CportPacketForwardingEnableSOF1 | 1.3.6.1.4.1.1966.12.1.5.14.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the start of frame 1. | ||||
| CportPacketForwardingSOF1 | 1.3.6.1.4.1.1966.12.1.5.14.1.7 | Hex8 | RW | |
column · Hex8 · read-write · current Any characters received before the start of frame is received will be ignored. | ||||
| CportPacketForwardingEnableSOF2 | 1.3.6.1.4.1.1966.12.1.5.14.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the start of frame 2. When this is enabled SOF1 must enabled | ||||
| CportPacketForwardingSOF2 | 1.3.6.1.4.1.1966.12.1.5.14.1.9 | Hex8 | RW | |
column · Hex8 · read-write · current Any characters received before the start of frame is received will be ignored. | ||||
| CportPacketForwardingStartFrameTransmit | 1.3.6.1.4.1.1966.12.1.5.14.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current A flag to determine if we will transmit the start of frame character(s). | ||||
| CportPacketForwardingEnableEOF1 | 1.3.6.1.4.1.1966.12.1.5.14.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the end of frame 1. | ||||
| CportPacketForwardingEOF1 | 1.3.6.1.4.1.1966.12.1.5.14.1.12 | Hex8 | RW | |
column · Hex8 · read-write · current The frame will be transmitted after this character is received based on the forwarding rule. | ||||
| CportPacketForwardingEnableEOF2 | 1.3.6.1.4.1.1966.12.1.5.14.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the end of frame 2. When this is enabled EOF1 must enabled | ||||
| CportPacketForwardingEOF2 | 1.3.6.1.4.1.1966.12.1.5.14.1.14 | Hex8 | RW | |
column · Hex8 · read-write · current The frame will be transmitted after this character is received based on the forwarding rule. | ||||
| CportPacketForwardingEnableEndTrigger1 | 1.3.6.1.4.1.1966.12.1.5.14.1.15 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the end of trigger 1. | ||||
| CportPacketForwardingEndTrigger1 | 1.3.6.1.4.1.1966.12.1.5.14.1.16 | Hex8 | RW | |
column · Hex8 · read-write · current When the end trigger is received the packet will transmitted based on the forwarding rules. | ||||
| CportPacketForwardingEnableEndTrigger2 | 1.3.6.1.4.1.1966.12.1.5.14.1.17 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable the end of trigger 2. When this is enabled EOF1 must enabled | ||||
| CportPacketForwardingEndTrigger2 | 1.3.6.1.4.1.1966.12.1.5.14.1.18 | Hex8 | RW | |
column · Hex8 · read-write · current When the end trigger is received the packet will transmitted based on the forwarding rules. | ||||
| CportPacketForwardingForwardingRule | 1.3.6.1.4.1.1966.12.1.5.14.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Forwarding rules.
| ||||
| CportPacketForwardingPacketIdleTime | 1.3.6.1.4.1.1966.12.1.5.14.1.20 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current When in Packet Accumulation mode it used for packet idle time | ||||
| CportPacketForwardingForwardMode | 1.3.6.1.4.1.1966.12.1.5.14.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Forwarding Mode.
| ||||
| TportTunnelTable | 1.3.6.1.4.1.1966.12.1.5.15 | NA | ||
table · not-accessible · current Port Tunnel Table. | ||||
| RportTunnelEntry | 1.3.6.1.4.1.1966.12.1.5.15.1 | NA | ||
row · not-accessible · current An entry in the portTunnelEntry, each relating to a port.
| ||||
| CportTunnelIndex | 1.3.6.1.4.1.1966.12.1.5.15.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portTunnelIndex | ||||
| CportTunnelStatus | 1.3.6.1.4.1.1966.12.1.5.15.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportTunnelPort | 1.3.6.1.4.1.1966.12.1.5.15.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. | ||||
| CportTunnelHost | 1.3.6.1.4.1.1966.12.1.5.15.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportTunnelHttpTunnelName | 1.3.6.1.4.1.1966.12.1.5.15.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportMODBUSSlaveTable | 1.3.6.1.4.1.1966.12.1.5.16 | NA | ||
table · not-accessible · current Port Modbus Slave Table. | ||||
| RportMODBUSSlaveEntry | 1.3.6.1.4.1.1966.12.1.5.16.1 | NA | ||
row · not-accessible · current An entry in the portMODBUSSlaveEntry, each relating to a port.
| ||||
| CportMODBUSSlaveIndex | 1.3.6.1.4.1.1966.12.1.5.16.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portMODBUSSlaveIndex | ||||
| CportMODBUSSlaveStatus | 1.3.6.1.4.1.1966.12.1.5.16.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportMODBUSSlaveMode | 1.3.6.1.4.1.1966.12.1.5.16.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CportMODBUSSlaveCRLF | 1.3.6.1.4.1.1966.12.1.5.16.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable appending CR/LF | ||||
| CportMODBUSSlaveUIDRange | 1.3.6.1.4.1.1966.12.1.5.16.1.5 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current The UID range for this entry. | ||||
| TportMODBUSMasterTable | 1.3.6.1.4.1.1966.12.1.5.17 | NA | ||
table · not-accessible · current Port Modbus Master Table. | ||||
| RportMODBUSMasterEntry | 1.3.6.1.4.1.1966.12.1.5.17.1 | NA | ||
row · not-accessible · current An entry in the portMODBUSMasterEntry, each relating to a port. | ||||
| CportMODBUSMasterIndex | 1.3.6.1.4.1.1966.12.1.5.17.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portMODBUSMasterIndex | ||||
| CportMODBUSMasterStatus | 1.3.6.1.4.1.1966.12.1.5.17.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportMODBUSMasterMode | 1.3.6.1.4.1.1966.12.1.5.17.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CportMODBUSMasterCRLF | 1.3.6.1.4.1.1966.12.1.5.17.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable appending CR/LF | ||||
| TportCustomAppTable | 1.3.6.1.4.1.1966.12.1.5.18 | NA | ||
table · not-accessible · current Port CustomApp Table. | ||||
| RportCustomAppEntry | 1.3.6.1.4.1.1966.12.1.5.18.1 | NA | ||
row · not-accessible · current An entry in the PortCustomAppEntry, each relating to a port.
| ||||
| CportCustomAppIndex | 1.3.6.1.4.1.1966.12.1.5.18.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portCustomAppIndex | ||||
| CportCustomAppStatus | 1.3.6.1.4.1.1966.12.1.5.18.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportCustomAppCommand | 1.3.6.1.4.1.1966.12.1.5.18.1.3 | DisplayString (SIZE (0..80)) | RW | |
column · DisplayString (SIZE (0..80)) · read-write · current The command line of the custom application. | ||||
| TportTrueportServiceTable | 1.3.6.1.4.1.1966.12.1.5.19 | NA | ||
table · not-accessible · current Port TrueportService Table. | ||||
| RportTrueportServiceEntry | 1.3.6.1.4.1.1966.12.1.5.19.1 | NA | ||
row · not-accessible · current An entry in the portTrueportServiceEntry, each relating to a port. | ||||
| CportTrueportServiceIndex | 1.3.6.1.4.1.1966.12.1.5.19.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The index of the corresponding serial port. | ||||
| CportTrueportServiceStatus | 1.3.6.1.4.1.1966.12.1.5.19.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportTrueportServicePort | 1.3.6.1.4.1.1966.12.1.5.19.1.3 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. | ||||
| CportTrueportServiceHost | 1.3.6.1.4.1.1966.12.1.5.19.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CportTrueportServiceClientInitiated | 1.3.6.1.4.1.1966.12.1.5.19.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether or not the network connection is initiated by the client | ||||
| CportTrueportServiceActiveSignal | 1.3.6.1.4.1.1966.12.1.5.19.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current When the line becomes active, this option has the following impact: o Lite Mode-When enabled, the EIA-232 signals remain high (active) before, during, and after the session. When disabled, the EIA-232 signals remain low (inactive). o Full Mode-During the session, the client will be control the state of these signal before and after the connection. Default is on. | ||||
| CportTrueportServiceTunnelName | 1.3.6.1.4.1.1966.12.1.5.19.1.7 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportPowerManagementTable | 1.3.6.1.4.1.1966.12.1.5.20 | NA | ||
table · not-accessible · current Port Power Management Table. | ||||
| RportPowerManagementEntry | 1.3.6.1.4.1.1966.12.1.5.20.1 | NA | ||
row · not-accessible · current An entry in the portPowerManagementEntry, each relating to a port. | ||||
| CportPowerManagementIndex | 1.3.6.1.4.1.1966.12.1.5.20.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portPowerManagementIndex | ||||
| CportPowerManagementStatus | 1.3.6.1.4.1.1966.12.1.5.20.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportPowerManagementName | 1.3.6.1.4.1.1966.12.1.5.20.1.3 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current Power bar's name. | ||||
| CportPowerManagementModel | 1.3.6.1.4.1.1966.12.1.5.20.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Power bar's model
| ||||
| TportMultihostTable | 1.3.6.1.4.1.1966.12.1.5.21 | NA | ||
table · not-accessible · current Port Multihost Table. | ||||
| RportMultihostEntry | 1.3.6.1.4.1.1966.12.1.5.21.1 | NA | ||
row · not-accessible · current An entry in the portMultihostEntry, each relating to a port.
| ||||
| CportMultihostIndex | 1.3.6.1.4.1.1966.12.1.5.21.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current portMultihostIndex | ||||
| CportMultihostStatus | 1.3.6.1.4.1.1966.12.1.5.21.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportMultihostMode | 1.3.6.1.4.1.1966.12.1.5.21.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode
| ||||
| TportMultihostOutboundTable | 1.3.6.1.4.1.1966.12.1.5.22 | NA | ||
table · not-accessible · current Multihost outbound table. | ||||
| RportMultihostOutboundEntry | 1.3.6.1.4.1.1966.12.1.5.22.1 | NA | ||
row · not-accessible · current An entry in the portMultihostOutboundTable. | ||||
| CportMultihostPortIndex | 1.3.6.1.4.1.1966.12.1.5.22.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number | ||||
| CportMultihostOutboundIndex | 1.3.6.1.4.1.1966.12.1.5.22.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The outbound entry number | ||||
| CportMultihostOutboundStatus | 1.3.6.1.4.1.1966.12.1.5.22.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportMultihostOutboundHostID | 1.3.6.1.4.1.1966.12.1.5.22.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host name. | ||||
| CportMultihostOutboundTcpPort | 1.3.6.1.4.1.1966.12.1.5.22.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The host TCP port. | ||||
| CportMultihostOutboundTunnel | 1.3.6.1.4.1.1966.12.1.5.22.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with this host. | ||||
| TportPowerManagementPlugTable | 1.3.6.1.4.1.1966.12.1.5.23 | NA | ||
table · not-accessible · current Power Management Plug Table. | ||||
| RportPowerManagementPlugEntry | 1.3.6.1.4.1.1966.12.1.5.23.1 | NA | ||
row · not-accessible · current An entry in the portPowerManagementPlugTable, each relating to a plug. | ||||
| CportPowerManagementPortIndex | 1.3.6.1.4.1.1966.12.1.5.23.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number | ||||
| CportPowerManagementPlugIndex | 1.3.6.1.4.1.1966.12.1.5.23.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The plug number | ||||
| CportPowerManagementPlugStatus | 1.3.6.1.4.1.1966.12.1.5.23.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportPowerManagementPlugName | 1.3.6.1.4.1.1966.12.1.5.23.1.4 | DisplayString (SIZE (0..19)) | RW | |
column · DisplayString (SIZE (0..19)) · read-write · current The plug's name. | ||||
| CportPowerManagementPlugPowerUpInterval | 1.3.6.1.4.1.1966.12.1.5.23.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The plug's power up delay.
| ||||
| CportPowerManagementPlugDefaultState | 1.3.6.1.4.1.1966.12.1.5.23.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current the plug's default state. | ||||
| CportPowerManagementDSLine | 1.3.6.1.4.1.1966.12.1.5.23.1.7 | PortNumber | RW | |
column · PortNumber · read-write · current the DS line number which the device on this plug is connected to(0:none, >0:corresponding to the line number. | ||||
| CportPowerManagementMonitorHost | 1.3.6.1.4.1.1966.12.1.5.23.1.8 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of a host to monitor. If the host fails to respond to pings, this plug's power will be cycled. Set to a blank string to disable this feature. | ||||
| CportPowerManagementMonitorInterval | 1.3.6.1.4.1.1966.12.1.5.23.1.9 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The time between pings, in minutes. | ||||
| CportPowerManagementMonitorTimeout | 1.3.6.1.4.1.1966.12.1.5.23.1.10 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The amount of time to wait after pings, in seconds. | ||||
| CportPowerManagementMonitorRetries | 1.3.6.1.4.1.1966.12.1.5.23.1.11 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The number of times to retry pings. | ||||
| CportPowerManagementMonitorEnableDelay | 1.3.6.1.4.1.1966.12.1.5.23.1.12 | OnOffValue | RW | |
column · OnOffValue · read-write · current Wait before cycling power, in the event of a monitor timeout. | ||||
| CportPowerManagementMonitorDelay | 1.3.6.1.4.1.1966.12.1.5.23.1.13 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current Amount of time to wait before cycling power, in the event of a monitor timeout. | ||||
| CportPowerManagementMonitorEnableConsoleMsg | 1.3.6.1.4.1.1966.12.1.5.23.1.14 | OnOffValue | RW | |
column · OnOffValue · read-write · current Display a message on the serial port, in the event of a monitor timeout, when power cycle delay is enabled.. | ||||
| CportPowerManagementMonitorEnableEmail | 1.3.6.1.4.1.1966.12.1.5.23.1.15 | OnOffValue | RW | |
column · OnOffValue · read-write · current Send an email alert, in the event of a monitor timeout, when power cycle delay is enabled.. | ||||
| TportMODBUSMasterMappingTable | 1.3.6.1.4.1.1966.12.1.5.24 | NA | ||
table · not-accessible · current Modbus Master Slave Mapping. | ||||
| RportMODBUSMasterMappingEntry | 1.3.6.1.4.1.1966.12.1.5.24.1 | NA | ||
row · not-accessible · current An entry in the portMODBUSMasterMappingTable, each relating to a slave mapping. | ||||
| CportMODBUSMasterPortIndex | 1.3.6.1.4.1.1966.12.1.5.24.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number | ||||
| CportMODBUSMasterMappingIndex | 1.3.6.1.4.1.1966.12.1.5.24.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The mapping table index | ||||
| CportMODBUSMasterMappingStatus | 1.3.6.1.4.1.1966.12.1.5.24.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportMODBUSMasterMappingRemoteIP | 1.3.6.1.4.1.1966.12.1.5.24.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The remote slave's IP address. | ||||
| CportMODBUSMasterMappingTransportType | 1.3.6.1.4.1.1966.12.1.5.24.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The remote slave's transport protocol type (TCP/UDP).
| ||||
| CportMODBUSMasterMappingPortNumber | 1.3.6.1.4.1.1966.12.1.5.24.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current the transport protocol layer port number (TCP/UDP). | ||||
| CportMODBUSMasterMappingUIDStart | 1.3.6.1.4.1.1966.12.1.5.24.1.7 | Integer32 (1..247) | RW | |
column · Integer32 (1..247) · read-write · current The start UID of the UID range for this entry. | ||||
| CportMODBUSMasterMappingUIDEnd | 1.3.6.1.4.1.1966.12.1.5.24.1.8 | Integer32 (1..247) | RW | |
column · Integer32 (1..247) · read-write · current The end UID of the UID range for this entry. | ||||
| CportMODBUSMasterMappingUIDRangeMode | 1.3.6.1.4.1.1966.12.1.5.24.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The UID-IP mapping mode.
| ||||
| CportMODBUSMasterMappingTunnelName | 1.3.6.1.4.1.1966.12.1.5.24.1.10 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| TportSSLCipherTable | 1.3.6.1.4.1.1966.12.1.5.25 | NA | ||
table · not-accessible · current SSL CIpher. | ||||
| RportSSLCipherEntry | 1.3.6.1.4.1.1966.12.1.5.25.1 | NA | ||
row · not-accessible · current An entry in the sslCipherTable, each relating to a cipher entry. | ||||
| CportSSLCipherIndex | 1.3.6.1.4.1.1966.12.1.5.25.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number | ||||
| CportSSLCipherPriority | 1.3.6.1.4.1.1966.12.1.5.25.1.2 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CportSSLCipherStatus | 1.3.6.1.4.1.1966.12.1.5.25.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CportSSLCipherEncryption | 1.3.6.1.4.1.1966.12.1.5.25.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CportSSLCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.5.25.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CportSSLCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.5.25.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CportSSLCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.5.25.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CportSSLCipherHMAC | 1.3.6.1.4.1.1966.12.1.5.25.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NmodemInfo | 1.3.6.1.4.1.1966.12.1.6 | |||
| TmodemInfoTable | 1.3.6.1.4.1.1966.12.1.6.1 | NA | ||
table · not-accessible · current The modem info table. | ||||
| RmodemInfoEntry | 1.3.6.1.4.1.1966.12.1.6.1.1 | NA | ||
row · not-accessible · current An entry in the modemInfoTable, each relating to a host.
| ||||
| CmodemIndex | 1.3.6.1.4.1.1966.12.1.6.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this modem | ||||
| CmodemStatus | 1.3.6.1.4.1.1966.12.1.6.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CmodemName | 1.3.6.1.4.1.1966.12.1.6.1.1.3 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The modem name used for this modem entry. If blank, this entry is currently unused. | ||||
| CmodemInitialisation | 1.3.6.1.4.1.1966.12.1.6.1.1.4 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current The modem Initialisation string | ||||
| NservicesInfo | 1.3.6.1.4.1.1966.12.1.7 | |||
| SserviceStatus | 1.3.6.1.4.1.1966.12.1.7.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SserviceDHCP | 1.3.6.1.4.1.1966.12.1.7.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the DHCP Service on the first ethernet interface. | ||||
| SserviceRouteD | 1.3.6.1.4.1.1966.12.1.7.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current RouteD Service | ||||
| SserviceTelnetD | 1.3.6.1.4.1.1966.12.1.7.4 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the TelnetD Service | ||||
| SserviceSSHD | 1.3.6.1.4.1.1966.12.1.7.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the SSHD Service | ||||
| SserviceHTTPD | 1.3.6.1.4.1.1966.12.1.7.6 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the HTTPD Service | ||||
| SserviceSnmpD | 1.3.6.1.4.1.1966.12.1.7.7 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the SnmpD Service | ||||
| SserviceSPCD | 1.3.6.1.4.1.1966.12.1.7.8 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the SPCD Service (TruePort) | ||||
| SserviceSNTP | 1.3.6.1.4.1.1966.12.1.7.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the SNTP Service | ||||
| SserviceHTTPSD | 1.3.6.1.4.1.1966.12.1.7.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the HTTPSD Service | ||||
| SserviceSyslog | 1.3.6.1.4.1.1966.12.1.7.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the Syslog Service | ||||
| SserviceDeviceManagerD | 1.3.6.1.4.1.1966.12.1.7.12 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the DeviceManagerD Service | ||||
| SserviceMODBUSD | 1.3.6.1.4.1.1966.12.1.7.13 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the Modbus Gateway Service | ||||
| SserviceSecondaryDHCP | 1.3.6.1.4.1.1966.12.1.7.14 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the DHCP Service on the eth2 interface | ||||
| SserviceIPSEC | 1.3.6.1.4.1.1966.12.1.7.15 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the IPSEC Service | ||||
| SserviceIncomingPings | 1.3.6.1.4.1.1966.12.1.7.16 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Allow incoming ping requests | ||||
| SserviceThirdDHCP | 1.3.6.1.4.1.1966.12.1.7.17 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Turn on/off the DHCP Service on the eth3 interface | ||||
| NtrueportInfo | 1.3.6.1.4.1.1966.12.1.8 | |||
| StrueportStatus | 1.3.6.1.4.1.1966.12.1.8.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Strueport50 | 1.3.6.1.4.1.1966.12.1.8.2 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 50 | ||||
| Strueport75 | 1.3.6.1.4.1.1966.12.1.8.3 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 75 | ||||
| Strueport110 | 1.3.6.1.4.1.1966.12.1.8.4 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 110 | ||||
| Strueport134 | 1.3.6.1.4.1.1966.12.1.8.5 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 134 | ||||
| Strueport150 | 1.3.6.1.4.1.1966.12.1.8.6 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 150 | ||||
| Strueport200 | 1.3.6.1.4.1.1966.12.1.8.7 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 200 | ||||
| Strueport300 | 1.3.6.1.4.1.1966.12.1.8.8 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 300 | ||||
| Strueport600 | 1.3.6.1.4.1.1966.12.1.8.9 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 600 | ||||
| Strueport1200 | 1.3.6.1.4.1.1966.12.1.8.10 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 1200 | ||||
| Strueport1800 | 1.3.6.1.4.1.1966.12.1.8.11 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 1800 | ||||
| Strueport2400 | 1.3.6.1.4.1.1966.12.1.8.12 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 2400 | ||||
| Strueport4800 | 1.3.6.1.4.1.1966.12.1.8.13 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 4800 | ||||
| Strueport9600 | 1.3.6.1.4.1.1966.12.1.8.14 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 9600 | ||||
| Strueport19200 | 1.3.6.1.4.1.1966.12.1.8.15 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 19200 | ||||
| Strueport38400 | 1.3.6.1.4.1.1966.12.1.8.16 | TrueportBaud | RW | |
scalar · TrueportBaud · read-write · current Mapping for trueport baud rate 38400 | ||||
| StrueportCustom50 | 1.3.6.1.4.1.1966.12.1.8.17 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current Mapping for trueport baud rate 50 | ||||
| StrueportCustom75 | 1.3.6.1.4.1.1966.12.1.8.18 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 75 | ||||
| StrueportCustom110 | 1.3.6.1.4.1.1966.12.1.8.19 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 110 | ||||
| StrueportCustom134 | 1.3.6.1.4.1.1966.12.1.8.20 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 134 | ||||
| StrueportCustom150 | 1.3.6.1.4.1.1966.12.1.8.21 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 150 | ||||
| StrueportCustom200 | 1.3.6.1.4.1.1966.12.1.8.22 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 200 | ||||
| StrueportCustom300 | 1.3.6.1.4.1.1966.12.1.8.23 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 300 | ||||
| StrueportCustom600 | 1.3.6.1.4.1.1966.12.1.8.24 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 600 | ||||
| StrueportCustom1200 | 1.3.6.1.4.1.1966.12.1.8.25 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 1200 | ||||
| StrueportCustom1800 | 1.3.6.1.4.1.1966.12.1.8.26 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 1800 | ||||
| StrueportCustom2400 | 1.3.6.1.4.1.1966.12.1.8.27 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 2400 | ||||
| StrueportCustom4800 | 1.3.6.1.4.1.1966.12.1.8.28 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 4800 | ||||
| StrueportCustom9600 | 1.3.6.1.4.1.1966.12.1.8.29 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 9600 | ||||
| StrueportCustom19200 | 1.3.6.1.4.1.1966.12.1.8.30 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 19200 | ||||
| StrueportCustom38400 | 1.3.6.1.4.1.1966.12.1.8.31 | Integer32 (50..230400) | RW | |
scalar · Integer32 (50..230400) · read-write · current custom mapping for trueport baud rate 38400 | ||||
| NradiusInfo | 1.3.6.1.4.1.1966.12.1.9 | |||
| SradiusStatus | 1.3.6.1.4.1.1966.12.1.9.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SradiusPrimaryAuthHost | 1.3.6.1.4.1.1966.12.1.9.2 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Primary Radius Authentication Host | ||||
| SradiusSecondaryAuthHost | 1.3.6.1.4.1.1966.12.1.9.3 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Secondary Radius Authentication Host | ||||
| SradiusAuthenticationPort | 1.3.6.1.4.1.1966.12.1.9.4 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port that the RADIUS host listens to for authentication requests. The default port is 1812. | ||||
| SradiusAccountingEnabled | 1.3.6.1.4.1.1966.12.1.9.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Radius Accounting enabled | ||||
| SradiusPrimaryAcctHost | 1.3.6.1.4.1.1966.12.1.9.6 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Name of the primary RADIUS authentication host. | ||||
| SradiusSecondaryAcctHost | 1.3.6.1.4.1.1966.12.1.9.7 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Name of the secondary RADIUS authentication host. | ||||
| SradiusAccountingPort | 1.3.6.1.4.1.1966.12.1.9.8 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port that the RADIUS host listens to for accounting requests. The default port is 1813. | ||||
| SradiusAcctAuth | 1.3.6.1.4.1.1966.12.1.9.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Radius Accounting Authenticator enabled | ||||
| SradiusRetryLimit | 1.3.6.1.4.1.1966.12.1.9.10 | Integer32 (0..255) | RW | |
scalar · Integer32 (0..255) · read-write · current The number of times the Device Server tries to connect to the RADIUS server before erroring out. Valid values are 0-255. The default is 5. | ||||
| SradiusTimeout | 1.3.6.1.4.1.1966.12.1.9.11 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The time, in seconds, that the Device Server waits to receive a reply after sending out a request to a RADIUS accounting or authentication host. If no reply is received before the timeout period expires, the Device Server will retry the same host up to and including the number of retry attempts. Valid values are 1-255. The default is 3 seconds. | ||||
| SradiusNasIdentifier | 1.3.6.1.4.1.1966.12.1.9.12 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The NAS identifier name. To delete this , set this field to blank. | ||||
| SradiusNasIpAddress | 1.3.6.1.4.1.1966.12.1.9.13 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When on, the NAS Identifier obtains ipv4 address automatically. Default is on. | ||||
| SradiusNasSpecifyIpAddress | 1.3.6.1.4.1.1966.12.1.9.14 | IpAddress | RW | |
scalar · IpAddress · read-write · current Specify the unique IPv4 address that NAS Identifier will use | ||||
| SradiusNasIpv6Address | 1.3.6.1.4.1.1966.12.1.9.15 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When on, the NAS Identifier obtains ipv6 address automatically. Default is on. | ||||
| SradiusNasSpecifyIpv6Address | 1.3.6.1.4.1.1966.12.1.9.16 | DisplayString | RW | |
scalar · DisplayString · read-write · current Specify the unique IPv6 address that NAS Identifier will use | ||||
| SradiusPrimaryAuthTunnel | 1.3.6.1.4.1.1966.12.1.9.17 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Primary Radius Authentication Tunnel | ||||
| SradiusSecondaryAuthTunnel | 1.3.6.1.4.1.1966.12.1.9.18 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Secondary Radius Authentication Tunnel | ||||
| SradiusPrimaryAcctTunnel | 1.3.6.1.4.1.1966.12.1.9.19 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Name of the primary RADIUS authentication tunnel. | ||||
| SradiusSecondaryAcctTunnel | 1.3.6.1.4.1.1966.12.1.9.20 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current Name of the secondary RADIUS authentication tunnel. | ||||
| NkerberosInfo | 1.3.6.1.4.1.1966.12.1.10 | |||
| SkerberosStatus | 1.3.6.1.4.1.1966.12.1.10.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SkerberosRealm | 1.3.6.1.4.1.1966.12.1.10.2 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The Kerberos realm is the Kerberos host domain name, in upper-case letters. | ||||
| SkerberosDomain | 1.3.6.1.4.1.1966.12.1.10.3 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The name of a host running the KDC (Key Distribution Center) for the specified realm. The host name that you specify must either be defined in the Device Server's Host Table before the last reboot or be resolved by DNS. | ||||
| SkerberosPort | 1.3.6.1.4.1.1966.12.1.10.4 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port that the Kerberos server listens to for authentication requests. If no port is specified, the default port 88 is used. | ||||
| NldapInfo | 1.3.6.1.4.1.1966.12.1.11 | |||
| SldapStatus | 1.3.6.1.4.1.1966.12.1.11.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SldapHost | 1.3.6.1.4.1.1966.12.1.11.2 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The name or IP address of the LDAP host. If you use a host name, that host must either have been defined in the Device Server's Host Table before the last reboot or be resolved by DNS. If you are using TLS, you must enter the same string you used to create the LDAP certificate. | ||||
| SldapPort | 1.3.6.1.4.1.1966.12.1.11.3 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port that the LDAP host listens to for authentication requests. The default port is 389. | ||||
| SldapBase | 1.3.6.1.4.1.1966.12.1.11.4 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The domain component (dc) that is the starting point for the search for user authentication. | ||||
| SldapEnableTLS | 1.3.6.1.4.1.1966.12.1.11.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enables/disables the Transport Layer Security (TLS) with the LDAP host. | ||||
| SldapTLSPort | 1.3.6.1.4.1.1966.12.1.11.6 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Specify the port number that LDAP will use for TLS. The default is port 636. | ||||
| SldapUID | 1.3.6.1.4.1.1966.12.1.11.7 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current LDAP user attribute. e.g. uid (OpenLDAP) sAMAccountName (Active Directory) The default is 'uid'. | ||||
| SldapPasswordEncryption | 1.3.6.1.4.1.1966.12.1.11.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current LDAP password encryption method.
| ||||
| SldapClientAuth | 1.3.6.1.4.1.1966.12.1.11.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current LDAP client authentication. | ||||
| SldapClientName | 1.3.6.1.4.1.1966.12.1.11.10 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current LDAP client name. Identifies the unit to the LDAP server, when client authentication is enabled. | ||||
| SldapClientAppendBase | 1.3.6.1.4.1.1966.12.1.11.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Append base to LDAP client name. | ||||
| SldapClientPassword | 1.3.6.1.4.1.1966.12.1.11.12 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current LDAP client password. Identifies the unit to the LDAP server, when client authentication is enabled. | ||||
| SldapHostTunnel | 1.3.6.1.4.1.1966.12.1.11.13 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the LDAP host. | ||||
| NtacacsInfo | 1.3.6.1.4.1.1966.12.1.12 | |||
| StacacsStatus | 1.3.6.1.4.1.1966.12.1.12.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| StacacsPrimaryHost | 1.3.6.1.4.1.1966.12.1.12.2 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The primary TACACS+ host that is used for authentication. | ||||
| StacacsSecondaryHost | 1.3.6.1.4.1.1966.12.1.12.3 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The secondary TACACS+ host that is used for authentication, should the primary TACACS+ host fail to respond. | ||||
| StacacsPort | 1.3.6.1.4.1.1966.12.1.12.4 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port number that TACACS+ listens to for authentication requests. The default port number is 49. | ||||
| StacacsAccounting | 1.3.6.1.4.1.1966.12.1.12.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/Disable TACACS+ accounting | ||||
| StacacsAccountingPrimaryHost | 1.3.6.1.4.1.1966.12.1.12.6 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The primary TACACS+ accounting host that is used for. | ||||
| StacacsAccountingSecondaryHost | 1.3.6.1.4.1.1966.12.1.12.7 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The secondary TACACS+ accounting host that is used for , should the primary TACACS+ host fail to respond. | ||||
| StacacsAccountingPort | 1.3.6.1.4.1.1966.12.1.12.8 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port number that TACACS+ listens to for accounting requests. The default port number is 49. | ||||
| StacacsAuthorization | 1.3.6.1.4.1.1966.12.1.12.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/Disable TACACS+ authorisation | ||||
| StacacsAlternateServiceNames | 1.3.6.1.4.1.1966.12.1.12.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable alternate service names for TACACS+. | ||||
| StacacsPrimaryTunnel | 1.3.6.1.4.1.1966.12.1.12.11 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the primary authentication server | ||||
| StacacsSecondaryTunnel | 1.3.6.1.4.1.1966.12.1.12.12 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the secondary authentication server | ||||
| StacacsAccountingPrimaryTunnel | 1.3.6.1.4.1.1966.12.1.12.13 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the primary accounting server | ||||
| StacacsAccountingSecondaryTunnel | 1.3.6.1.4.1.1966.12.1.12.14 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the secondary accounting server | ||||
| NsecuridInfo | 1.3.6.1.4.1.1966.12.1.13 | |||
| SsecuridStatus | 1.3.6.1.4.1.1966.12.1.13.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsecuridMasterHost | 1.3.6.1.4.1.1966.12.1.13.2 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The first SecurID server that is tried for user authentication. | ||||
| SsecuridSlaveHost | 1.3.6.1.4.1.1966.12.1.13.3 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current If the first SecurID server does not respond to an authentication request, this is the next SecurID server that is tried for user authentication. | ||||
| SsecuridPort | 1.3.6.1.4.1.1966.12.1.13.4 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port number that SecurID listens to for authentication requests. The default port number is 5500. | ||||
| SsecuridType | 1.3.6.1.4.1.1966.12.1.13.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current You can specify either SDI or DES encryption for SecurID server communication. The default is SDI encryption.
| ||||
| SsecuridLegacy | 1.3.6.1.4.1.1966.12.1.13.6 | YesNoValue | RW | |
scalar · YesNoValue · read-write · current If you are running SecurID 3.x or 4.x, you need to run in Legacy Mode. If you are running SecurID 5.x or above, do not select Legacy Mode. | ||||
| SsecuridMasterTunnel | 1.3.6.1.4.1.1966.12.1.13.7 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current HTTP tunnel associated with master host. | ||||
| SsecuridSlaveTunnel | 1.3.6.1.4.1.1966.12.1.13.8 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current HTTP tunnel associated with slave host. | ||||
| NnisInfo | 1.3.6.1.4.1.1966.12.1.14 | |||
| SnisStatus | 1.3.6.1.4.1.1966.12.1.14.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SnisDomain | 1.3.6.1.4.1.1966.12.1.14.2 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The NIS domain name. | ||||
| SnisPrimaryHost | 1.3.6.1.4.1.1966.12.1.14.3 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The primary NIS host that is used for authentication. | ||||
| SnisSecondaryHost | 1.3.6.1.4.1.1966.12.1.14.4 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The secondary NIS host that is used for authentication, should the primary NIS host fail to respond. | ||||
| SnisPrimaryTunnel | 1.3.6.1.4.1.1966.12.1.14.5 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the primary host. | ||||
| SnisSecondaryTunnel | 1.3.6.1.4.1.1966.12.1.14.6 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the secondary host. | ||||
| NsshServerInfo | 1.3.6.1.4.1.1966.12.1.15 | |||
| SsshServerStatus | 1.3.6.1.4.1.1966.12.1.15.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsshServerRSA | 1.3.6.1.4.1.1966.12.1.15.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When a client SSH session requests RSA authentication, the Device Server's SSH server will authenticate the user via RSA. | ||||
| SsshServerDSA | 1.3.6.1.4.1.1966.12.1.15.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When a client SSH session requests DSA authentication, the Device Server's SSH server will authenticate the user via DSA | ||||
| SsshServerKeyboard | 1.3.6.1.4.1.1966.12.1.15.4 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The user types in a password for authentication. | ||||
| SsshServer3Des | 1.3.6.1.4.1.1966.12.1.15.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's 3DES encryption is enabled/disabled. | ||||
| SsshServerBlowfish | 1.3.6.1.4.1.1966.12.1.15.6 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's Blowfish encryption is enabled/disabled. | ||||
| SsshServerAES | 1.3.6.1.4.1.1966.12.1.15.7 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's AES-CBC encryption is enabled/disabled | ||||
| SsshServerCAST | 1.3.6.1.4.1.1966.12.1.15.8 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's CAST encryption is enabled/disabled | ||||
| SsshServerArcfour | 1.3.6.1.4.1.1966.12.1.15.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's Arcfour encryption is enabled/disabled. | ||||
| SsshServerVerbose | 1.3.6.1.4.1.1966.12.1.15.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Displays debug messages on the terminal. | ||||
| SsshServerCompression | 1.3.6.1.4.1.1966.12.1.15.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. | ||||
| SsshServerBreakString | 1.3.6.1.4.1.1966.12.1.15.12 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The break string used for inband SSH break signal processing. A break signal is generated on a specific serial port only when the server's break option is enabled and the user currently connected using reverse SSH has typed the break string exactly. The default is set to ~break, where ~ is tilde; the break string can be up to eight characters. | ||||
| SsshServerSSH1 | 1.3.6.1.4.1.1966.12.1.15.13 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/Disable SSH-1 on the server. | ||||
| SsshServerPassword | 1.3.6.1.4.1.1966.12.1.15.14 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The user types in a password for authentication. | ||||
| SsshServerLoginTimeout | 1.3.6.1.4.1.1966.12.1.15.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The number of seconds that the ssh session will wait to complete the login process. If the timer expires, then the ssh session will be terminated. | ||||
| SsshServerAESctr | 1.3.6.1.4.1.1966.12.1.15.16 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's AES-CTR encryption is enabled/disabled. | ||||
| SsshServerAESgcm | 1.3.6.1.4.1.1966.12.1.15.17 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's AES-GCM encryption is enabled/disabled. | ||||
| SsshServerChaCha20Poly1305 | 1.3.6.1.4.1.1966.12.1.15.18 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The Device Server SSH server's ChaCha20-Poly1305 encryption is enabled/disabled. | ||||
| NdefUserInfo | 1.3.6.1.4.1.1966.12.1.16 | |||
| SdefUserStatus | 1.3.6.1.4.1.1966.12.1.16.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SdefUserService | 1.3.6.1.4.1.1966.12.1.16.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The type of service that the user will use: dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear or sslraw.
| ||||
| SdefUserLanguage | 1.3.6.1.4.1.1966.12.1.16.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current You can specify whether a user will use English or Customlang as the language that appears in the Menu, CLI, or WebManager. The Device Server supports one custom language that must be downloaded to the Device Server; otherwise, Customlang defaults to English.
| ||||
| SdefUserLevel | 1.3.6.1.4.1.1966.12.1.16.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The access that a user is allowed:
Admin-The admin level user has total access to the Device Server.
You can create more than one admin user account but we
recommend that you only have one. They can monitor and
configure the Device Server.
Normal-The Normal level user has limited access to the Device Server.
Limited CLI commands and Menu access are available with the
ability to configure the user's own configuration settings.
Restricted-The Restricted level user can only access predefined
sessions or access the Easy Port Access menu. Can only view or
monitor the Device Server using CLI commands to display
information about the Device Server.
Menu-The menu level user will only be able to access predefined session
or access the Easy Port Access menu. The Easy Port Access allows
the user to connect to the accessible line without disconnecting
their initial connection to the Device Server. Does not have any
access to CLI commands.
| ||||
| SdefUserHotKeyPrefix | 1.3.6.1.4.1.1966.12.1.16.5 | Hex8 | RW | |
scalar · Hex8 · read-write · current The prefix that a user types to control the current session. The default
value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would
be Ctrl-b (^b), etc.):
^a number-To switch from one session to another, press ^a and then the
required session number. For example, ^a 2 would switch you to
session 2. Pressing ^a 0 will return you to the Device Server Menu.
^a n-Display the next session. The current session will remain active. The
lowest numbered active session will be displayed.
^a p-Display the previous session. The current session will remain active.
The highest numbered active session will be displayed.
^a m-To exit a session and return to the Device Server. You will be
returned to where you left off. The session will be left running.
^a l-(Lowercase L) Locks the line until the user unlocks it. The user is
prompted for a password (any password, excluding spaces) and locks
the line. Next, the user must retype the password to unlock the line.
^r-When you switch from a session back to the Menu, the screen may not be
redrawn correctly. If this happens, use this command to redraw it properly.
The User Hotkey Prefix value overrides the Line Hotkey Prefix value. You can
use the Hotkey Prefix keys to lock a line only when the line Lock parameter is On. | ||||
| SdefUserPhoneNumber | 1.3.6.1.4.1.1966.12.1.16.6 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The phone number the Device Server will dial to callback the user (you must have set Callback to On). Enter the number without spaces. | ||||
| SdefUserCallBack | 1.3.6.1.4.1.1966.12.1.16.7 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When On, enter a phone number for the Device Server to call the user back (the Callback parameter is unrelated to the Line Dial parameter). Note: the Device Server will allow callback only when a user is authenticated. If the protocol over the link does not provide authentication, there will be no callback. Therefore, when the Line Service is set to PPP, you must use either PAP or CHAP, because these protocols provide authentication. The default is Off. The Device Server supports another type of callback, Roaming Callback, which is configurable when the Line Service is set to PPP. | ||||
| SdefUserIdleTimer | 1.3.6.1.4.1.1966.12.1.16.8 | Integer32 (0..4294967) | RW | |
scalar · Integer32 (0..4294967) · read-write · current The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, because there has been no exchange of data within the specified time, the Device Server will close the connection. The default value is 0 (zero), meaning that the Idle Timer will not expire (the connection is open permanently). The maximum value is 4294967 seconds. The User Idle Timer will override the Line Idle Timer, with the exception of reverse Telnet sessions. | ||||
| SdefUserSessionTimer | 1.3.6.1.4.1.1966.12.1.16.9 | Integer32 (0..4294967) | RW | |
scalar · Integer32 (0..4294967) · read-write · current Enter a time, in seconds, for which the Session Timer will run. Use this timer to forcibly close the session (connection). When the Session Timer expires, the Device Server will end the connection. The default value is 0 seconds so the port will never timeout. The maximum value is 4294967 seconds (about 49 days). | ||||
| SdefUserIpHost | 1.3.6.1.4.1.1966.12.1.16.10 | Ipv4v6Address | RW | |
scalar · Ipv4v6Address · read-write · current When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target host IP address. If 255.255.255.255 is specified in the configuration, the user will be prompted for an IP address or hostname. If no IP address is specified, the Host IP value in the Default User configuration will be used. The default is 0.0.0.0. | ||||
| SdefUserTelnetPort | 1.3.6.1.4.1.1966.12.1.16.11 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming connections. Default is 23. | ||||
| SdefUserSSHPort | 1.3.6.1.4.1.1966.12.1.16.12 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current userSSHPort | ||||
| SdefUserTcpClearPort | 1.3.6.1.4.1.1966.12.1.16.13 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The port number for the TCP-Clear or SSL-Raw session. | ||||
| SdefUserFramedIp | 1.3.6.1.4.1.1966.12.1.16.14 | IpAddress | RW | |
scalar · IpAddress · read-write · current Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the address in dot decimal notation as follows: 255.255.255.254 (default)-The Device Server will use the Remote IP Address set in the PPP settings for the line. 255.255.255.255-When the User Service is PPP, the Device Server will allow the remote machine to specify its IP address (overriding the IP address negotiation value configured in the PPP settings). 255.255.255.255-When the User Service is SLIP, the Device Server will use the Remote IP Address set for the line (no negotiation). n.n.n.n-(where n is a number) Enter the IP address of your choice. This IP address will then be used in preference to the Remote IP Address set for a line. | ||||
| SdefUserSubnetBits | 1.3.6.1.4.1.1966.12.1.16.15 | Integer32 (0..32) | RW | |
scalar · Integer32 (0..32) · read-write · current (IPv4 only) If the remote user is on a subnet, enter the number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. | ||||
| SdefUserIpv6InterfaceId | 1.3.6.1.4.1.1966.12.1.16.16 | Ipv6InterfaceId | RW | |
scalar · Ipv6InterfaceId · read-write · current Used for User Service PPP, sets the IP address of the remote user. Enter the address in IPv6 format. The first 64 bits of the Interface Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the expected format. | ||||
| SdefUserFramedMtu | 1.3.6.1.4.1.1966.12.1.16.17 | Integer32 (64..1500) | RW | |
scalar · Integer32 (64..1500) · read-write · current Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes, being transferred across the link. On noisy links it might be preferable to fragment large packets being transferred over the link, since there will be quicker recovery from errors. Depending on whether you have selected a User Service of SLIP or PPP, details are as follows: PPP-Framed MTU will be the maximum size of packets that the Device Server port will accept. This value is negotiated between the two ends of the link. The valid range is 64-1500. The default is 1500 bytes. SLIP-Framed MTU will be the maximum size of packets being sent by the Device Server. The Device Server will send SLIP packets in the range 256-1006 bytes. The default value is 256 bytes. The Framed MTU value will be used in preference to the MTU/MRU values set for a Line. | ||||
| SdefUserFramedCompression | 1.3.6.1.4.1.1966.12.1.16.18 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is used on the link. VJ compression is a means of reducing the standard TCP/IP header from 40 octets to approximately 5 octets. This gives a significant performance improvement, particularly when interactive applications are being used. For example, when the user is typing, a single character can be passed over the link with a 40 octet header attached. VJ Compression has little effect on other types of links, such as ftp, where the packets are much larger. The Framed Compression value will be used in preference to the VJ Compression value set for a Line. The default is Off. | ||||
| SdefUserRouting | 1.3.6.1.4.1.1966.12.1.16.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the routing mode used for RIP packets on the PPP and SLIP interfaces. Values are: None-RIP packets are neither received nor sent by the Device Server. Send-RIP packets can only be sent by the Device Server. Listen-RIP packets can only be received by the Device Server. Send and Listen-RIP packets are sent and received by the Device Server.
| ||||
| SdefUserAllowAccessClusterPorts | 1.3.6.1.4.1.1966.12.1.16.20 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Allow/disallow the user to access to clustering ports. | ||||
| SdefUserHost | 1.3.6.1.4.1.1966.12.1.16.21 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name of the host. | ||||
| TdefUserPortAccessTable | 1.3.6.1.4.1.1966.12.1.16.22 | NA | ||
table · not-accessible · current The port access info table for user. | ||||
| RdefUserPortAccessEntry | 1.3.6.1.4.1.1966.12.1.16.22.1 | NA | ||
row · not-accessible · current An entry in the portAccessTable, each relating to a user's access privileges for a serial port. | ||||
| CdefUserPortAccessPortIndex | 1.3.6.1.4.1.1966.12.1.16.22.1.1 | PortNumber | NA | |
column · PortNumber · not-accessible · current The port number that user access applies to. | ||||
| CdefUserPortAccessStatus | 1.3.6.1.4.1.1966.12.1.16.22.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CdefUserPortRWAccessAllowed | 1.3.6.1.4.1.1966.12.1.16.22.1.3 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read write access to the port. | ||||
| CdefUserPortRIAccessAllowed | 1.3.6.1.4.1.1966.12.1.16.22.1.4 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read input access to the port. | ||||
| CdefUserPortROAccessAllowed | 1.3.6.1.4.1.1966.12.1.16.22.1.5 | YesNoValue | RW | |
column · YesNoValue · read-write · current Enable or disable the user's read output access to the port. | ||||
| NsnmpInfo | 1.3.6.1.4.1.1966.12.1.17 | |||
| SsnmpStatus | 1.3.6.1.4.1.1966.12.1.17.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsnmpContact | 1.3.6.1.4.1.1966.12.1.17.2 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name and contract information of the person who manages this SMNP node. | ||||
| SsnmpLocation | 1.3.6.1.4.1.1966.12.1.17.3 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The physical location of the SNMP node. | ||||
| SsnmpReadOnlyUser | 1.3.6.1.4.1.1966.12.1.17.4 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current (SNMP version 3) Specified user can only view SNMP variables. | ||||
| SsnmpReadWriteUser | 1.3.6.1.4.1.1966.12.1.17.5 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current (SNMP version 3) Specified user can view and edit SNMP variables. | ||||
| TsnmpCommunityTable | 1.3.6.1.4.1.1966.12.1.17.6 | NA | ||
table · not-accessible · current snmpCommunityTable | ||||
| RsnmpCommunityEntry | 1.3.6.1.4.1.1966.12.1.17.6.1 | NA | ||
| CsnmpCommunityIndex | 1.3.6.1.4.1.1966.12.1.17.6.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current snmpCommunityIndex | ||||
| CsnmpCommunityStatus | 1.3.6.1.4.1.1966.12.1.17.6.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CsnmpCommunityName | 1.3.6.1.4.1.1966.12.1.17.6.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current A name that will be sent to the Device Server from an SNMP manager. This name will define the permissions of the manager. | ||||
| CsnmpCommunityIpAddress | 1.3.6.1.4.1.1966.12.1.17.6.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The IP address of the SNMP manager that will send requests to the Device Server. If the address is 0.0.0.0, any SNMP manager with the Community Name can access the Device Server. | ||||
| CsnmpCommunityPermission | 1.3.6.1.4.1.1966.12.1.17.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Permits the Device Server to respond to SNMP requests by: None-There is no response to requests from SNMP. Readonly-Responds only to Read requests from SNMP. Readwrite-Responds to both Read and Write requests from SNMP.
| ||||
| TsnmpTrapTable | 1.3.6.1.4.1.1966.12.1.17.7 | NA | ||
table · not-accessible · current snmpTrapTable | ||||
| RsnmpTrapEntry | 1.3.6.1.4.1.1966.12.1.17.7.1 | NA | ||
| CsnmpTrapIndex | 1.3.6.1.4.1.1966.12.1.17.7.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current snmpTrapIndex | ||||
| CsnmpTrapStatus | 1.3.6.1.4.1.1966.12.1.17.7.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CsnmpTrapName | 1.3.6.1.4.1.1966.12.1.17.7.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current An arbitrary trap community name. | ||||
| CsnmpTrapIpAddress | 1.3.6.1.4.1.1966.12.1.17.7.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current Defines the hosts (by IP address) that will receive trap messages generated by the Device Server. Up to four trap hosts can be defined. | ||||
| CsnmpTrapTunnelName | 1.3.6.1.4.1.1966.12.1.17.7.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| CsnmpTrapVersion | 1.3.6.1.4.1.1966.12.1.17.7.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Set trap version.
| ||||
| CsnmpTrapType | 1.3.6.1.4.1.1966.12.1.17.7.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Set trap type. Inform is only valid for v2c or v3.
| ||||
| CsnmpTrapEnable | 1.3.6.1.4.1.1966.12.1.17.7.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Set trap enabled.
| ||||
| SsnmpReadOnlySecurityLevel | 1.3.6.1.4.1.1966.12.1.17.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read only user security level.
| ||||
| SsnmpReadOnlyAuthAlgorithm | 1.3.6.1.4.1.1966.12.1.17.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read only user authentication method.
| ||||
| SsnmpReadOnlyAuthPasswd | 1.3.6.1.4.1.1966.12.1.17.10 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set read only user authentication password. | ||||
| SsnmpReadOnlyPrivacyAlgorithm | 1.3.6.1.4.1.1966.12.1.17.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read only user privacy algorithm.
| ||||
| SsnmpReadOnlyPrivacyPasswd | 1.3.6.1.4.1.1966.12.1.17.12 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set read only user privacy password. | ||||
| SsnmpReadWriteSecurityLevel | 1.3.6.1.4.1.1966.12.1.17.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read write user security level.
| ||||
| SsnmpReadWriteAuthAlgorithm | 1.3.6.1.4.1.1966.12.1.17.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read write user authentication method.
| ||||
| SsnmpReadWriteAuthPasswd | 1.3.6.1.4.1.1966.12.1.17.15 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set read write user authentication password. | ||||
| SsnmpReadWritePrivacyAlgorithm | 1.3.6.1.4.1.1966.12.1.17.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set read write user privacy algorithm.
| ||||
| SsnmpReadWritePrivacyPasswd | 1.3.6.1.4.1.1966.12.1.17.17 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set read write user privacy password. | ||||
| SsnmpTrapUser | 1.3.6.1.4.1.1966.12.1.17.18 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current (SNMP version 3) Specified user for sending traps. | ||||
| SsnmpTrapSecurityLevel | 1.3.6.1.4.1.1966.12.1.17.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set trap user security level.
| ||||
| SsnmpTrapAuthAlgorithm | 1.3.6.1.4.1.1966.12.1.17.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set trap user authentication method.
| ||||
| SsnmpTrapAuthPasswd | 1.3.6.1.4.1.1966.12.1.17.21 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set trap user authentication password. | ||||
| SsnmpTrapPrivacyAlgorithm | 1.3.6.1.4.1.1966.12.1.17.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set trap user privacy algorithm.
| ||||
| SsnmpTrapPrivacyPasswd | 1.3.6.1.4.1.1966.12.1.17.23 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set trap user privacy password. | ||||
| SsnmpEngineIdString | 1.3.6.1.4.1.1966.12.1.17.24 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current set the string to use to create the engine ID. | ||||
| SsnmpEngineId | 1.3.6.1.4.1.1966.12.1.17.25 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current Displays the current engine ID. | ||||
| SsnmpInformTimeout | 1.3.6.1.4.1.1966.12.1.17.26 | Integer32 (0..231) | RW | |
scalar · Integer32 (0..231) · read-write · current Set Inform timeout in seconds. | ||||
| SsnmpInformRetries | 1.3.6.1.4.1.1966.12.1.17.27 | Integer32 (0..231) | RW | |
scalar · Integer32 (0..231) · read-write · current Set Inform retries in seconds. | ||||
| NdnsInfo | 1.3.6.1.4.1.1966.12.1.18 | |||
| TdnsTable | 1.3.6.1.4.1.1966.12.1.18.1 | NA | ||
table · not-accessible · current dnsTable | ||||
| RdnsEntry | 1.3.6.1.4.1.1966.12.1.18.1.1 | NA | ||
| CdnsIndex | 1.3.6.1.4.1.1966.12.1.18.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current dnsIndex | ||||
| CdnsStatus | 1.3.6.1.4.1.1966.12.1.18.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CdnsIpAddress | 1.3.6.1.4.1.1966.12.1.18.1.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current You can specify the IP addresses for up to two DNS (Domain Name Servers) hosts in your network. The first DNS entry in the list is the primary DNS and the second DNS entry is the secondary server. | ||||
| CdnsActive | 1.3.6.1.4.1.1966.12.1.18.1.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Activates/deactivates a DNS entry. | ||||
| NwinsInfo | 1.3.6.1.4.1.1966.12.1.19 | |||
| TwinsTable | 1.3.6.1.4.1.1966.12.1.19.1 | NA | ||
table · not-accessible · current winsTable | ||||
| RwinsEntry | 1.3.6.1.4.1.1966.12.1.19.1.1 | NA | ||
| CwinsIndex | 1.3.6.1.4.1.1966.12.1.19.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current winsIndex | ||||
| CwinsStatus | 1.3.6.1.4.1.1966.12.1.19.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CwinsIpAddress | 1.3.6.1.4.1.1966.12.1.19.1.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current You can specify the IP addresses for up to two WINS (Windows Internet Naming Service) hosts in your network. The first WINS entry in the list is the primary WINS server and the second WINS entry is the secondary server. | ||||
| CwinsActive | 1.3.6.1.4.1.1966.12.1.19.1.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Activates/deactivates a WINS entry. | ||||
| NgatewayInfo | 1.3.6.1.4.1.1966.12.1.20 | |||
| TgatewayTable | 1.3.6.1.4.1.1966.12.1.20.1 | NA | ||
table · not-accessible · current gatewayTable | ||||
| RgatewayEntry | 1.3.6.1.4.1.1966.12.1.20.1.1 | NA | ||
| CgatewayIndex | 1.3.6.1.4.1.1966.12.1.20.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current gatewayIndex | ||||
| CgatewayStatus | 1.3.6.1.4.1.1966.12.1.20.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CgatewayHost | 1.3.6.1.4.1.1966.12.1.20.1.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current You can specify up to twenty hosts to act as gateways in your network. Each gateway host must be defined in the Device Server host table. | ||||
| CgatewayType | 1.3.6.1.4.1.1966.12.1.20.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Specify the type of gateway:
Default-A gateway which provides general access beyond
your local network.
Host-A gateway reserved for accessing a specific host
external to your local network.
Network-A gateway reserved for accessing a specific
network external to your local network.
| ||||
| CgatewayIpAddress | 1.3.6.1.4.1.1966.12.1.20.1.1.5 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current When the gateway is a Host or Network gateway, you must specify the IP address of the target host machine/network. | ||||
| CgatewaySubnetBits | 1.3.6.1.4.1.1966.12.1.20.1.1.6 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current When the gateway is a Network gateway, you must specify the subnet/prefix bits for that network. If the IP address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128. | ||||
| CgatewayInterface | 1.3.6.1.4.1.1966.12.1.20.1.1.7 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The interface that the device server is going to use to access the Remote Host. The list is comprised of the Ethernet interface(s) and serial ports configured for the Remote Access (PPP) or Remote Access (SLIP) profiles. This string must be the actual name of the PPP/SLIP serial port, serial_port_x (where x=number) if no name is specified or the IPv6 tunnel name or ipv6_tunnelx (where x=tunnel number). | ||||
| NsyslogInfo | 1.3.6.1.4.1.1966.12.1.21 | |||
| SsyslogStatus | 1.3.6.1.4.1.1966.12.1.21.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsyslogPrimaryHost | 1.3.6.1.4.1.1966.12.1.21.2 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The first preconfigured host that the Device Server will attempt to send system log messages to; messages will be displayed on the host's monitor. | ||||
| SsyslogSecondaryHost | 1.3.6.1.4.1.1966.12.1.21.3 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current If the Device Server cannot communicate with the primary host, then the Device Server will attempt to send system log messages to this preconfigured host; messages will be displayed on the host's monitor. | ||||
| SsyslogLevel | 1.3.6.1.4.1.1966.12.1.21.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the event level that triggers a syslog entry: Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug When you select a Level, all the levels that appear above it in the list also trigger a syslog entry. For example, if you select Error, all Error, Critical, Alert, and Emergency events will be logged.
| ||||
| SsyslogPrimaryTunnel | 1.3.6.1.4.1.1966.12.1.21.5 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the primary host. | ||||
| SsyslogSecondaryTunnel | 1.3.6.1.4.1.1966.12.1.21.6 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the secondary host. | ||||
| NemailInfo | 1.3.6.1.4.1.1966.12.1.22 | |||
| SemailStatus | 1.3.6.1.4.1.1966.12.1.22.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SemailActive | 1.3.6.1.4.1.1966.12.1.22.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Determines whether or not email notification is turned on. Default is Off. | ||||
| SemailLevel | 1.3.6.1.4.1.1966.12.1.22.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Choose the event level that triggers an email notification: Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug. You are selecting the lowest notification level; therefore, when you select Debug, you will get an email notification for all events that trigger a message.
| ||||
| SemailTo | 1.3.6.1.4.1.1966.12.1.22.4 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current An email address or list of email addresses that will receive the email notification. | ||||
| SemailFrom | 1.3.6.1.4.1.1966.12.1.22.5 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current This field can contain an email address that might identify the Device Server name or some other value. | ||||
| SemailSMTPHost | 1.3.6.1.4.1.1966.12.1.22.6 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The SMTP host (email server) that will process the email notification request. This can be either a host name defined in the Device Server host table or the SMTP host IP address. | ||||
| SemailReply | 1.3.6.1.4.1.1966.12.1.22.7 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The email address to whom all replies to the email notification should go. | ||||
| SemailSubject | 1.3.6.1.4.1.1966.12.1.22.8 | DisplayString (SIZE (0..48)) | RW | |
scalar · DisplayString (SIZE (0..48)) · read-write · current A text string, which can contain spaces, that will display in the Subject field of the email notification. | ||||
| SemailSMTPUsername | 1.3.6.1.4.1.1966.12.1.22.9 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The username for the SMTP server, if the server requires authentication. | ||||
| SemailSMTPPassword | 1.3.6.1.4.1.1966.12.1.22.10 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The password for the SMTP server, if the server requires authentication. | ||||
| SemailSMTPEncryption | 1.3.6.1.4.1.1966.12.1.22.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The encryption method for the SMTP server.
| ||||
| SemailSMTPValidatePeerCertificate | 1.3.6.1.4.1.1966.12.1.22.12 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Validate peer SSL/TLS certificate, when SSL or TLS encryption is used. | ||||
| SemailSMTPTcpPort | 1.3.6.1.4.1.1966.12.1.22.13 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The TCP port used for communicating with the SMTP server. For no encryption or TLS encryption, use port 25. For SSL encryption, use port 465. | ||||
| SemailSMTPDomain | 1.3.6.1.4.1.1966.12.1.22.14 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The domain for NTLM authentication with the SMTP server, if applicable. | ||||
| SemailSMTPHostTunnel | 1.3.6.1.4.1.1966.12.1.22.15 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the SMTP host. | ||||
| NripInfo | 1.3.6.1.4.1.1966.12.1.23 | |||
| SripStatus | 1.3.6.1.4.1.1966.12.1.23.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SripMode | 1.3.6.1.4.1.1966.12.1.23.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable RIP (Routing Information Protocol) mode for the Ethernet interface with one of the following options: None-Disables RIP over the Ethernet interface. Send-Sends RIP over the Ethernet interface. Listen-Listens for RIP over the Ethernet interface. Send and Listen-Sends RIP and listens for RIP over the Ethernet interface.
| ||||
| SripAuthentication | 1.3.6.1.4.1.1966.12.1.23.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify the type of RIP authentication: None-No authentication for RIP. Password-Simple RIP password authentication. MD5-Use MD5 RIP authentication.
| ||||
| TripKeysInfoTable | 1.3.6.1.4.1.1966.12.1.23.4 | NA | ||
table · not-accessible · current The RIP authentication keys info table. | ||||
| RripKeysInfoEntry | 1.3.6.1.4.1.1966.12.1.23.4.1 | NA | ||
row · not-accessible · current An entry in the ripKeysInfoTable, each relating to a RIP authentication key. | ||||
| CripKeysChainIndex | 1.3.6.1.4.1.1966.12.1.23.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The key chain index for this RIP authentication key. | ||||
| CripKeysKeyIndex | 1.3.6.1.4.1.1966.12.1.23.4.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The key index in the chain for this RIP authentication key. | ||||
| CripKeyStatus | 1.3.6.1.4.1.1966.12.1.23.4.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CripKeyId | 1.3.6.1.4.1.1966.12.1.23.4.1.4 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The key Id for this RIP authentication key. | ||||
| CripKeyStartDate | 1.3.6.1.4.1.1966.12.1.23.4.1.5 | Date | RW | |
column · Date · read-write · current The starting date for which this RIP authentication key becomes effective. Format dd/mm/yyyy | ||||
| CripKeyStartTime | 1.3.6.1.4.1.1966.12.1.23.4.1.6 | Time | RW | |
column · Time · read-write · current The starting time (local time) for which this RIP authentication key becomes effective. Format hh:mm:ss | ||||
| CripKeyEndDate | 1.3.6.1.4.1.1966.12.1.23.4.1.7 | Date | RW | |
column · Date · read-write · current The end date , after which this RIP authentication key is no longer in effect. | ||||
| CripKeyEndTime | 1.3.6.1.4.1.1966.12.1.23.4.1.8 | Time | RW | |
column · Time · read-write · current The end time (local time), after which this RIP authentication key is no longer in effect. | ||||
| NtimeInfo | 1.3.6.1.4.1.1966.12.1.24 | |||
| StimeStatus | 1.3.6.1.4.1.1966.12.1.24.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| StimeZoneName | 1.3.6.1.4.1.1966.12.1.24.2 | DisplayString (SIZE (0..4)) | RW | |
scalar · DisplayString (SIZE (0..4)) · read-write · current The name of the time zone when using standard time. | ||||
| StimeOffset | 1.3.6.1.4.1.1966.12.1.24.3 | Integer32 (-720..840) | RW | |
scalar · Integer32 (-720..840) · read-write · current The offset of summer time from standard time in minutes. | ||||
| StimeSummerName | 1.3.6.1.4.1.1966.12.1.24.4 | DisplayString (SIZE (0..4)) | RW | |
scalar · DisplayString (SIZE (0..4)) · read-write · current The name of the time zone when using summer time. | ||||
| StimeSummerOffset | 1.3.6.1.4.1.1966.12.1.24.5 | Integer32 (0..180) | RW | |
scalar · Integer32 (0..180) · read-write · current The offset of summer time from standard time in minutes. | ||||
| StimeSummerMode | 1.3.6.1.4.1.1966.12.1.24.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current You can configure the summer time to take effect: None-No summer time change. Fixed-The summer time change goes into effect at the specified time every year. For example, April 15 at 1:00 pm. Recurring-The summer time changes goes into effect every year at same relative time. For example, on the third week in April on a Tuesday at 1:00 pm.
| ||||
| StimeSummerRecStartMonth | 1.3.6.1.4.1.1966.12.1.24.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time start month.
| ||||
| StimeSummerRecStartWeek | 1.3.6.1.4.1.1966.12.1.24.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time start week.
| ||||
| StimeSummerRecStartDay | 1.3.6.1.4.1.1966.12.1.24.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time start day.
| ||||
| StimeSummerRecStartHour | 1.3.6.1.4.1.1966.12.1.24.10 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current The recurring summer time start hour. | ||||
| StimeSummerRecStartMin | 1.3.6.1.4.1.1966.12.1.24.11 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current The recurring summer time start minute | ||||
| StimeSummerRecEndMonth | 1.3.6.1.4.1.1966.12.1.24.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time end month.
| ||||
| StimeSummerRecEndWeek | 1.3.6.1.4.1.1966.12.1.24.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time end week.
| ||||
| StimeSummerRecEndDay | 1.3.6.1.4.1.1966.12.1.24.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The recurring summer time end day.
| ||||
| StimeSummerRecEndHour | 1.3.6.1.4.1.1966.12.1.24.15 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current The recurring summer time end hour | ||||
| StimeSummerRecEndMin | 1.3.6.1.4.1.1966.12.1.24.16 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current The recurring summer time end minute | ||||
| StimeSummerFixStartMonth | 1.3.6.1.4.1.1966.12.1.24.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The fixed summer time start month
| ||||
| StimeSummerFixStartDay | 1.3.6.1.4.1.1966.12.1.24.18 | Integer32 (1..31) | RW | |
scalar · Integer32 (1..31) · read-write · current The fixed summer time start day | ||||
| StimeSummerFixStartHour | 1.3.6.1.4.1.1966.12.1.24.19 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current The fixed summer time start hour | ||||
| StimeSummerFixStartMinute | 1.3.6.1.4.1.1966.12.1.24.20 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current The fixed summer time start minute | ||||
| StimeSummerFixEndMonth | 1.3.6.1.4.1.1966.12.1.24.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current The fixed summer time End month
| ||||
| StimeSummerFixEndDay | 1.3.6.1.4.1.1966.12.1.24.22 | Integer32 (1..31) | RW | |
scalar · Integer32 (1..31) · read-write · current The fixed summer time End day | ||||
| StimeSummerFixEndHour | 1.3.6.1.4.1.1966.12.1.24.23 | Integer32 (0..23) | RW | |
scalar · Integer32 (0..23) · read-write · current The fixed summer time End hour | ||||
| StimeSummerFixEndMinute | 1.3.6.1.4.1.1966.12.1.24.24 | Integer32 (0..59) | RW | |
scalar · Integer32 (0..59) · read-write · current The fixed summer time End minute | ||||
| StimeSntpMode | 1.3.6.1.4.1.1966.12.1.24.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current The sntp client mode. Valid modes are Unicast, Multicast or Anycast
| ||||
| StimeSntpVersion | 1.3.6.1.4.1.1966.12.1.24.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current The sntp client version.
| ||||
| StimeSntpHost1 | 1.3.6.1.4.1.1966.12.1.24.27 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The first remote SNTP host name that the device server communicates with. | ||||
| StimeSntpHost2 | 1.3.6.1.4.1.1966.12.1.24.28 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The second remote SNTP host name that the device server communicates with. | ||||
| StimeSntpTunnelName1 | 1.3.6.1.4.1.1966.12.1.24.29 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the first host. | ||||
| StimeSntpTunnelName2 | 1.3.6.1.4.1.1966.12.1.24.30 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the second host. | ||||
| SserverSntpServerAuthentication | 1.3.6.1.4.1.1966.12.1.24.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies whether the iolan with authenticate the ntp time server.
| ||||
| SserverSntpKeyID | 1.3.6.1.4.1.1966.12.1.24.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the key ID to use for host 1 during server authentication. | ||||
| SserverSntpKeyID2 | 1.3.6.1.4.1.1966.12.1.24.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the key ID to use for host 2 during server authentication. | ||||
| NfileInfo | 1.3.6.1.4.1.1966.12.1.25 | |||
| SfileStatus | 1.3.6.1.4.1.1966.12.1.25.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SfileFirmwareHost | 1.3.6.1.4.1.1966.12.1.25.2 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The host name or IP address of the server that contains the firmware file. If you use a host name, it must exist in the Device Server's host table or be resolved by DNS. | ||||
| SfileFirmwareName | 1.3.6.1.4.1.1966.12.1.25.3 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the update software for the Device Server that will be loaded when the Device Server is rebooted. | ||||
| SfileConfigurationHost | 1.3.6.1.4.1.1966.12.1.25.4 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The host name or IP address of the server that contains the configuration file. If you use a host name, it must exist in the Device Server's host table or be resolved by DNS. | ||||
| SfileConfigurationName | 1.3.6.1.4.1.1966.12.1.25.5 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the new configuration file for the Device Server that will be loaded when the Device Server is rebooted. | ||||
| SfileMOTDHost | 1.3.6.1.4.1.1966.12.1.25.6 | DisplayString (SIZE (0..46)) | RW | |
scalar · DisplayString (SIZE (0..46)) · read-write · current The host name or IP address of the server that contains the MOTD file. If you use a host name, it must exist in the Device Server's host table or be resolved by DNS. | ||||
| SfileMOTDName | 1.3.6.1.4.1.1966.12.1.25.7 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current The path and file name (do not use a drive letter), relative to the default path of your TFTP server software, of the file that contains a string that is displayed when a user connects to the Device Server. | ||||
| SfileMOTDTunnel | 1.3.6.1.4.1.1966.12.1.25.8 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with the MOTD host. | ||||
| NsntpStatsInfo | 1.3.6.1.4.1.1966.12.1.27 | |||
| SsntpStatsAddress | 1.3.6.1.4.1.1966.12.1.27.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current sntpStatsAddress | ||||
| SsntpStatsLastUpdate | 1.3.6.1.4.1.1966.12.1.27.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current sntpStatsLastUpdate | ||||
| SsntpStatsLeapIndicator | 1.3.6.1.4.1.1966.12.1.27.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current sntpStatsLeapIndicator
| ||||
| SsntpStatsVersion | 1.3.6.1.4.1.1966.12.1.27.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current sntpStatsVersion
| ||||
| SsntpStatsMode | 1.3.6.1.4.1.1966.12.1.27.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current sntpStatsMode
| ||||
| SsntpStatsStratum | 1.3.6.1.4.1.1966.12.1.27.6 | Integer32 (0..15) | RO | |
scalar · Integer32 (0..15) · read-only · current sntpStatsStratum | ||||
| SsntpStatsRefId | 1.3.6.1.4.1.1966.12.1.27.7 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current sntpStatsRefId | ||||
| SsntpStatsOffset | 1.3.6.1.4.1.1966.12.1.27.8 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current sntpStats | ||||
| NripTableInfo | 1.3.6.1.4.1.1966.12.1.28 | |||
| TripInfoTable | 1.3.6.1.4.1.1966.12.1.28.1 | NA | ||
table · not-accessible · current The rip info table. | ||||
| RripInfoEntry | 1.3.6.1.4.1.1966.12.1.28.1.1 | NA | ||
row · not-accessible · current An entry in the ripInfoTable, each relating to a rip entry.
| ||||
| CripIndex | 1.3.6.1.4.1.1966.12.1.28.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this rip. | ||||
| CripTableIpAddr | 1.3.6.1.4.1.1966.12.1.28.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current ripIpAddr | ||||
| CripTableLastUpdate | 1.3.6.1.4.1.1966.12.1.28.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Last Update in Seconds | ||||
| CripTableVersion | 1.3.6.1.4.1.1966.12.1.28.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Version | ||||
| CripTableAuthType | 1.3.6.1.4.1.1966.12.1.28.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication Type
| ||||
| CripTableSequence | 1.3.6.1.4.1.1966.12.1.28.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Sequence | ||||
| CripTableBadPackets | 1.3.6.1.4.1.1966.12.1.28.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current ripTableBadPackets | ||||
| CripTableBadRoutes | 1.3.6.1.4.1.1966.12.1.28.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current ripTableBadRoutes | ||||
| NtcpConnStatsInfo | 1.3.6.1.4.1.1966.12.1.29 | |||
| TtcpConnTable | 1.3.6.1.4.1.1966.12.1.29.1 | NA | ||
table · not-accessible · current tcpConnTable. | ||||
| RtcpConnEntry | 1.3.6.1.4.1.1966.12.1.29.1.1 | NA | ||
| CtcpConnIndex | 1.3.6.1.4.1.1966.12.1.29.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CtcpConnLocalAddress | 1.3.6.1.4.1.1966.12.1.29.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current LocalAddress | ||||
| CtcpConnLocalPort | 1.3.6.1.4.1.1966.12.1.29.1.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current LocalPort | ||||
| CtcpConnRemoteAddress | 1.3.6.1.4.1.1966.12.1.29.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current RemoteAddress | ||||
| CtcpConnRemotePort | 1.3.6.1.4.1.1966.12.1.29.1.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current RemotePort | ||||
| CtcpConnTxQueueBytes | 1.3.6.1.4.1.1966.12.1.29.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current tcpConnTxQueueBytes | ||||
| CtcpConnRxQueueBytes | 1.3.6.1.4.1.1966.12.1.29.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current tcpConnRxQueueBytes | ||||
| CtcpConnState | 1.3.6.1.4.1.1966.12.1.29.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State
| ||||
| NudpConnStatsInfo | 1.3.6.1.4.1.1966.12.1.30 | |||
| TudpConnTable | 1.3.6.1.4.1.1966.12.1.30.1 | NA | ||
table · not-accessible · current udpConnTable | ||||
| RudpConnEntry | 1.3.6.1.4.1.1966.12.1.30.1.1 | NA | ||
| CudpConnIndex | 1.3.6.1.4.1.1966.12.1.30.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CudpConnLocalAddress | 1.3.6.1.4.1.1966.12.1.30.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current LocalAddress | ||||
| CudpConnLocalPort | 1.3.6.1.4.1.1966.12.1.30.1.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current LocalPort | ||||
| CudpConnRemoteAddress | 1.3.6.1.4.1.1966.12.1.30.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current RemoteAddress | ||||
| CudpConnRemotePort | 1.3.6.1.4.1.1966.12.1.30.1.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current RemotePort | ||||
| CudpConnTxQueueBytes | 1.3.6.1.4.1.1966.12.1.30.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current udpConnTxQueueBytes | ||||
| CudpConnRxQueueBytes | 1.3.6.1.4.1.1966.12.1.30.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current udpConnRxQueueBytes | ||||
| CudpConnState | 1.3.6.1.4.1.1966.12.1.30.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State
| ||||
| Nipv6StatsInfo | 1.3.6.1.4.1.1966.12.1.31 | |||
| SipV6StatsRxTotalPkts | 1.3.6.1.4.1.1966.12.1.31.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxTotal | ||||
| SipV6StatsRxHdrErrors | 1.3.6.1.4.1.1966.12.1.31.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxHdrErrors | ||||
| SipV6StatsRxTooBigErrors | 1.3.6.1.4.1.1966.12.1.31.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxTooBigErrors | ||||
| SipV6StatsRxNoRoutes | 1.3.6.1.4.1.1966.12.1.31.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxNoRoutes | ||||
| SipV6StatsRxAddrErrors | 1.3.6.1.4.1.1966.12.1.31.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxAddrErrors | ||||
| SipV6StatsRxUnknownProtos | 1.3.6.1.4.1.1966.12.1.31.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxUnknownProtos | ||||
| SipV6StatsRxTruncatedPkts | 1.3.6.1.4.1.1966.12.1.31.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxTruncatedPkts | ||||
| SipV6StatsRxDiscards | 1.3.6.1.4.1.1966.12.1.31.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxDiscards | ||||
| SipV6StatsRxDelivers | 1.3.6.1.4.1.1966.12.1.31.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxDelivers | ||||
| SipV6StatsRxMcastPkts | 1.3.6.1.4.1.1966.12.1.31.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxMcastPkts | ||||
| SipV6StatsTxForwDatagrams | 1.3.6.1.4.1.1966.12.1.31.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxForwDatagrams | ||||
| SipV6StatsTxRequests | 1.3.6.1.4.1.1966.12.1.31.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxRequests | ||||
| SipV6StatsTxDiscards | 1.3.6.1.4.1.1966.12.1.31.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxDiscards | ||||
| SipV6StatsTxNoRoutes | 1.3.6.1.4.1.1966.12.1.31.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxNoRoutes | ||||
| SipV6StatsTxMcastPkts | 1.3.6.1.4.1.1966.12.1.31.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxMcastPkts | ||||
| SipV6StatsReasmTimeout | 1.3.6.1.4.1.1966.12.1.31.16 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current ReasmTimeout | ||||
| SipV6StatsReasmReqds | 1.3.6.1.4.1.1966.12.1.31.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current ReasmReqds | ||||
| SipV6StatsReasmOKs | 1.3.6.1.4.1.1966.12.1.31.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current ReasmOKs | ||||
| SipV6StatsReasmFails | 1.3.6.1.4.1.1966.12.1.31.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current ReasmFails | ||||
| SipV6StatsFragOKs | 1.3.6.1.4.1.1966.12.1.31.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current FragOKs | ||||
| SipV6StatsFragFails | 1.3.6.1.4.1.1966.12.1.31.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current FragFails | ||||
| SipV6StatsFragCreates | 1.3.6.1.4.1.1966.12.1.31.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current FragCreates | ||||
| Nicmpv6StatsInfo | 1.3.6.1.4.1.1966.12.1.32 | |||
| SicmpV6TxMsgs | 1.3.6.1.4.1.1966.12.1.32.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxMsgs | ||||
| SicmpV6TxErrors | 1.3.6.1.4.1.1966.12.1.32.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxErrors | ||||
| SicmpV6TxDestUnreachs | 1.3.6.1.4.1.1966.12.1.32.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxDestUnreachs | ||||
| SicmpV6TxPktTooBigs | 1.3.6.1.4.1.1966.12.1.32.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxPktTooBigs | ||||
| SicmpV6TxTimeExcds | 1.3.6.1.4.1.1966.12.1.32.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxTimeExcds | ||||
| SicmpV6TxParmProblems | 1.3.6.1.4.1.1966.12.1.32.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxParmProblems | ||||
| SicmpV6TxEchos | 1.3.6.1.4.1.1966.12.1.32.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxEchos | ||||
| SicmpV6TxEchoReplies | 1.3.6.1.4.1.1966.12.1.32.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxEchoReplies | ||||
| SicmpV6TxGroupMembQueries | 1.3.6.1.4.1.1966.12.1.32.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxGroupMembQueries | ||||
| SicmpV6TxGroupMembResponses | 1.3.6.1.4.1.1966.12.1.32.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxGroupMembResponses | ||||
| SicmpV6TxGroupMembReductions | 1.3.6.1.4.1.1966.12.1.32.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxGroupMembReductions | ||||
| SicmpV6TxRouterSolicits | 1.3.6.1.4.1.1966.12.1.32.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxRouterSolicits | ||||
| SicmpV6TxRouterAdvertisements | 1.3.6.1.4.1.1966.12.1.32.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxRouterAdvertisements | ||||
| SicmpV6TxNeighborSolicits | 1.3.6.1.4.1.1966.12.1.32.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxNeighborSolicits | ||||
| SicmpV6TxNeighborAdvertisements | 1.3.6.1.4.1.1966.12.1.32.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxNeighborAdvertisements | ||||
| SicmpV6TxRedirects | 1.3.6.1.4.1.1966.12.1.32.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current TxRedirects | ||||
| SicmpV6RxMsgs | 1.3.6.1.4.1.1966.12.1.32.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxMsgs | ||||
| SicmpV6RxDestUnreachs | 1.3.6.1.4.1.1966.12.1.32.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxDestUnreachs | ||||
| SicmpV6RxPktTooBigs | 1.3.6.1.4.1.1966.12.1.32.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxPktTooBigs | ||||
| SicmpV6RxTimeExcds | 1.3.6.1.4.1.1966.12.1.32.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxTimeExcds | ||||
| SicmpV6RxParmProblems | 1.3.6.1.4.1.1966.12.1.32.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxParmProblems | ||||
| SicmpV6RxEchoReplies | 1.3.6.1.4.1.1966.12.1.32.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxEchoReplies | ||||
| SicmpV6RxRouterSolicits | 1.3.6.1.4.1.1966.12.1.32.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxRouterSolicits | ||||
| SicmpV6RxNeighborSolicits | 1.3.6.1.4.1.1966.12.1.32.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxNeighborSolicits | ||||
| SicmpV6RxNeighborAdvertisements | 1.3.6.1.4.1.1966.12.1.32.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxNeighborAdvertisements | ||||
| SicmpV6RxRedirects | 1.3.6.1.4.1.1966.12.1.32.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxRedirects | ||||
| SicmpV6RxGroupMembResponses | 1.3.6.1.4.1.1966.12.1.32.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxGroupMembResponses | ||||
| SicmpV6RxGroupMembReductions | 1.3.6.1.4.1.1966.12.1.32.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current RxGroupMembReductions | ||||
| Nudpv6StatsInfo | 1.3.6.1.4.1.1966.12.1.33 | |||
| SudpV6RxDatagrams | 1.3.6.1.4.1.1966.12.1.33.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current udpV6RxDatagrams | ||||
| SudpV6noPorts | 1.3.6.1.4.1.1966.12.1.33.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current udpV6noPorts | ||||
| SudpV6RxErrors | 1.3.6.1.4.1.1966.12.1.33.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current udpV6RxErrors | ||||
| SudpV6TxDatagrams | 1.3.6.1.4.1.1966.12.1.33.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current udpV6TxDatagrams | ||||
| NtcpConnv6StatsInfo | 1.3.6.1.4.1.1966.12.1.34 | |||
| TtcpConnv6Table | 1.3.6.1.4.1.1966.12.1.34.1 | NA | ||
table · not-accessible · current The rip info table. | ||||
| RtcpConnv6Entry | 1.3.6.1.4.1.1966.12.1.34.1.1 | NA | ||
| CtcpConnv6Index | 1.3.6.1.4.1.1966.12.1.34.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CtcpConnv6LocalAddress | 1.3.6.1.4.1.1966.12.1.34.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current LocalAddress | ||||
| CtcpConnv6LocalPort | 1.3.6.1.4.1.1966.12.1.34.1.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current LocalPort | ||||
| CtcpConnv6RemoteAddress | 1.3.6.1.4.1.1966.12.1.34.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current RemoteAddress | ||||
| CtcpConnv6RemotePort | 1.3.6.1.4.1.1966.12.1.34.1.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current RemotePort | ||||
| CtcpConnv6TxQueueBytes | 1.3.6.1.4.1.1966.12.1.34.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current tcpConnv6TxQueueBytes | ||||
| CtcpConnv6RxQueueBytes | 1.3.6.1.4.1.1966.12.1.34.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current tcpConnv6RxQueueBytes | ||||
| CtcpConnv6State | 1.3.6.1.4.1.1966.12.1.34.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State
| ||||
| NudpConnv6StatsInfo | 1.3.6.1.4.1.1966.12.1.35 | |||
| TudpConnv6Table | 1.3.6.1.4.1.1966.12.1.35.1 | NA | ||
table · not-accessible · current udpConnv6Table | ||||
| RudpConnv6Entry | 1.3.6.1.4.1.1966.12.1.35.1.1 | NA | ||
| CudpConnv6Index | 1.3.6.1.4.1.1966.12.1.35.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CudpConnv6LocalAddress | 1.3.6.1.4.1.1966.12.1.35.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current LocalAddress | ||||
| CudpConnv6LocalPort | 1.3.6.1.4.1.1966.12.1.35.1.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current LocalPort | ||||
| CudpConnv6RemoteAddress | 1.3.6.1.4.1.1966.12.1.35.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current RemoteAddress | ||||
| CudpConnv6RemotePort | 1.3.6.1.4.1.1966.12.1.35.1.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current RemotePort | ||||
| CudpConnv6TxQueueBytes | 1.3.6.1.4.1.1966.12.1.35.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current TxQueue | ||||
| CudpConnv6RxQueueBytes | 1.3.6.1.4.1.1966.12.1.35.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current RxQueue | ||||
| CudpConnv6State | 1.3.6.1.4.1.1966.12.1.35.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current State
| ||||
| Nroutev6Info | 1.3.6.1.4.1.1966.12.1.36 | |||
| Troutev6Table | 1.3.6.1.4.1.1966.12.1.36.1 | NA | ||
table · not-accessible · current The route IPv6 info table. | ||||
| Rroutev6Entry | 1.3.6.1.4.1.1966.12.1.36.1.1 | NA | ||
| Croutev6Index | 1.3.6.1.4.1.1966.12.1.36.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| Croutev6Destination | 1.3.6.1.4.1.1966.12.1.36.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Destination | ||||
| Croutev6PrefixBits | 1.3.6.1.4.1.1966.12.1.36.1.1.3 | Integer32 (0..128) | RO | |
column · Integer32 (0..128) · read-only · current PrefixBits | ||||
| Croutev6Gateway | 1.3.6.1.4.1.1966.12.1.36.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Gateway | ||||
| Croutev6Metric | 1.3.6.1.4.1.1966.12.1.36.1.1.5 | Integer32 (1..15) | RO | |
column · Integer32 (1..15) · read-only · current Metric | ||||
| Croutev6Flags | 1.3.6.1.4.1.1966.12.1.36.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Flags | ||||
| Croutev6Interface | 1.3.6.1.4.1.1966.12.1.36.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Interface | ||||
| Nripv6TableInfo | 1.3.6.1.4.1.1966.12.1.37 | |||
| Tripv6InfoTable | 1.3.6.1.4.1.1966.12.1.37.1 | NA | ||
table · not-accessible · current The ripv6 info table. | ||||
| Rripv6InfoEntry | 1.3.6.1.4.1.1966.12.1.37.1.1 | NA | ||
row · not-accessible · current An entry in the ripv6InfoTable, each relating to a ripv6 entry.
| ||||
| Cripv6Index | 1.3.6.1.4.1.1966.12.1.37.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this ripv6. | ||||
| Cripv6TableIpAddr | 1.3.6.1.4.1.1966.12.1.37.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current ripv6IpAddr | ||||
| Cripv6TableLastUpdate | 1.3.6.1.4.1.1966.12.1.37.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Last Update in Seconds | ||||
| Cripv6TableBadPackets | 1.3.6.1.4.1.1966.12.1.37.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Last Update in Seconds | ||||
| Cripv6TableBadRoutes | 1.3.6.1.4.1.1966.12.1.37.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Last Update in Seconds | ||||
| Ninterfacev6Info | 1.3.6.1.4.1.1966.12.1.38 | |||
| Tinterfacev6InfoTable | 1.3.6.1.4.1.1966.12.1.38.1 | NA | ||
table · not-accessible · current The interface IPv6 info table. | ||||
| Rinterfacev6InfoEntry | 1.3.6.1.4.1.1966.12.1.38.1.1 | NA | ||
| Cinterfacev6Index | 1.3.6.1.4.1.1966.12.1.38.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current interfacev6Index | ||||
| Cinterfacev6Name | 1.3.6.1.4.1.1966.12.1.38.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current interfacev6Name | ||||
| Cinterfacev6Address | 1.3.6.1.4.1.1966.12.1.38.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current interfacev6Address | ||||
| Cinterfacev6PrefixBits | 1.3.6.1.4.1.1966.12.1.38.1.1.4 | Integer32 (0..128) | RO | |
column · Integer32 (0..128) · read-only · current interfacev6PrefixBits | ||||
| Cinterfacev6Scope | 1.3.6.1.4.1.1966.12.1.38.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current interfacev6Scope
| ||||
| NsslInfo | 1.3.6.1.4.1.1966.12.1.39 | |||
| SsslServerStatus | 1.3.6.1.4.1.1966.12.1.39.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsslVersion | 1.3.6.1.4.1.1966.12.1.39.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection will use only TLSv1.
SSLv3-The connection will use only SSLv3.
The default is Any.
| ||||
| SsslType | 1.3.6.1.4.1.1966.12.1.39.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.
| ||||
| SsslVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.39.4 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| SsslCountry | 1.3.6.1.4.1.1966.12.1.39.5 | DisplayString (SIZE (0..2)) | RW | |
scalar · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| SsslStateProv | 1.3.6.1.4.1.1966.12.1.39.6 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| SsslLocality | 1.3.6.1.4.1.1966.12.1.39.7 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| SsslOrganisation | 1.3.6.1.4.1.1966.12.1.39.8 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| SsslOrganisationUnit | 1.3.6.1.4.1.1966.12.1.39.9 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| SsslCommonName | 1.3.6.1.4.1.1966.12.1.39.10 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| SsslEmail | 1.3.6.1.4.1.1966.12.1.39.11 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| TsslCipherTable | 1.3.6.1.4.1.1966.12.1.39.12 | NA | ||
table · not-accessible · current SSL CIpher. | ||||
| RsslCipherEntry | 1.3.6.1.4.1.1966.12.1.39.12.1 | NA | ||
row · not-accessible · current An entry in the sslCipherTable, each relating to a cipher entry.
| ||||
| CsslCipherPriority | 1.3.6.1.4.1.1966.12.1.39.12.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CsslCipherStatus | 1.3.6.1.4.1.1966.12.1.39.12.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CsslCipherEncryption | 1.3.6.1.4.1.1966.12.1.39.12.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CsslCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.39.12.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CsslCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.39.12.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CsslCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.39.12.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CsslCipherHMAC | 1.3.6.1.4.1.1966.12.1.39.12.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NconsoleInfo | 1.3.6.1.4.1.1966.12.1.40 | |||
| SconsoleStatus | 1.3.6.1.4.1.1966.12.1.40.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SconsoleSpeed | 1.3.6.1.4.1.1966.12.1.40.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the baud rate of the console port; keep in mind that speed is affected by the length of the cable.
| ||||
| SconsoleFlowControl | 1.3.6.1.4.1.1966.12.1.40.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines whether the data flow is handled by the software (Soft), hardware (Hard) or None.
| ||||
| SconsoleMediaType | 1.3.6.1.4.1.1966.12.1.40.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines whether the USB or RJ45 port is used for console input when the device is started.
| ||||
| SconsoleUsbTimeout | 1.3.6.1.4.1.1966.12.1.40.5 | Integer32 (0..240) | RW | |
scalar · Integer32 (0..240) · read-write · current Defines a inactivity timeout for the USB port. If this expires the console function is switched to the RJ45. Actual time out values are 1-240 minutes plus 0 indicates no timeout. | ||||
| NethStatsInfo | 1.3.6.1.4.1.1966.12.1.41 | |||
| TethStatsInfoTable | 1.3.6.1.4.1.1966.12.1.41.1 | NA | ||
table · not-accessible · current The Ethernet statistics table. | ||||
| RethStatsInfoEntry | 1.3.6.1.4.1.1966.12.1.41.1.1 | NA | ||
row · not-accessible · current An entry in the Ethernet statistics table, each relating to an Ethernet interface.
| ||||
| CethStatsIndex | 1.3.6.1.4.1.1966.12.1.41.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The Ethernet interface number. | ||||
| CethStatsName | 1.3.6.1.4.1.1966.12.1.41.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Displays Ethernet statistics. | ||||
| CethStatsMacAddress | 1.3.6.1.4.1.1966.12.1.41.1.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current Displays the MAC address. | ||||
| CethStatsStatus | 1.3.6.1.4.1.1966.12.1.41.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Displays the Ethernet status: 1 is down and 2 is up.
| ||||
| CethStatsBroadcast | 1.3.6.1.4.1.1966.12.1.41.1.1.5 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsBroadcast | ||||
| CethStatsDebug | 1.3.6.1.4.1.1966.12.1.41.1.1.6 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsDebug | ||||
| CethStatsLoopback | 1.3.6.1.4.1.1966.12.1.41.1.1.7 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsLoopback | ||||
| CethStatsPointtoPoint | 1.3.6.1.4.1.1966.12.1.41.1.1.8 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsPointtoPoint | ||||
| CethStatsNoTrailers | 1.3.6.1.4.1.1966.12.1.41.1.1.9 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsNoTrailers | ||||
| CethStatsRunning | 1.3.6.1.4.1.1966.12.1.41.1.1.10 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsRunning | ||||
| CethStatsNoArp | 1.3.6.1.4.1.1966.12.1.41.1.1.11 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsNoArp | ||||
| CethStatsPromiscuous | 1.3.6.1.4.1.1966.12.1.41.1.1.12 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsPromiscuous | ||||
| CethStatsRxMulticast | 1.3.6.1.4.1.1966.12.1.41.1.1.13 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsRxMulticast | ||||
| CethStatsMasterLoadBalancer | 1.3.6.1.4.1.1966.12.1.41.1.1.14 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsMasterLoadBalancer | ||||
| CethStatsSlaveLoadBalancer | 1.3.6.1.4.1.1966.12.1.41.1.1.15 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsSlaveLoadBalancer | ||||
| CethStatsMulticast | 1.3.6.1.4.1.1966.12.1.41.1.1.16 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsMulticast | ||||
| CethStatsSetMedia | 1.3.6.1.4.1.1966.12.1.41.1.1.17 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsSetMedia | ||||
| CethStatsAutoMedia | 1.3.6.1.4.1.1966.12.1.41.1.1.18 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsAutoMedia | ||||
| CethStatsDynamic | 1.3.6.1.4.1.1966.12.1.41.1.1.19 | YesNoValue | RO | |
column · YesNoValue · read-only · current ethStatsDynamic | ||||
| CethStatsLocalAddress | 1.3.6.1.4.1.1966.12.1.41.1.1.20 | IpAddress | RO | |
column · IpAddress · read-only · current ethStatsLocalAddress | ||||
| CethStatsSubnetMask | 1.3.6.1.4.1.1966.12.1.41.1.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current ethStatsSubnetMask | ||||
| CethStatsBroadcastAddress | 1.3.6.1.4.1.1966.12.1.41.1.1.22 | IpAddress | RO | |
column · IpAddress · read-only · current ethStatsBroadcastAddress | ||||
| CethStatsMtu | 1.3.6.1.4.1.1966.12.1.41.1.1.23 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current ethStatsMtu | ||||
| CethStatsTxQLen | 1.3.6.1.4.1.1966.12.1.41.1.1.24 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current ethStatsTxQLen | ||||
| CethStatsRxBytes | 1.3.6.1.4.1.1966.12.1.41.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxBytes | ||||
| CethStatsTxBytes | 1.3.6.1.4.1.1966.12.1.41.1.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxBytes | ||||
| CethStatsRxPackets | 1.3.6.1.4.1.1966.12.1.41.1.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxPackets | ||||
| CethStatsTxPackets | 1.3.6.1.4.1.1966.12.1.41.1.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxPackets | ||||
| CethStatsRxErrors | 1.3.6.1.4.1.1966.12.1.41.1.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxErrors | ||||
| CethStatsTxPktErrors | 1.3.6.1.4.1.1966.12.1.41.1.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxPktErrors | ||||
| CethStatsRxDroppedPkts | 1.3.6.1.4.1.1966.12.1.41.1.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxDroppedPkts | ||||
| CethStatsTxDroppedPkts | 1.3.6.1.4.1.1966.12.1.41.1.1.32 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxDroppedPkts | ||||
| CethStatsRxOverruns | 1.3.6.1.4.1.1966.12.1.41.1.1.33 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxOverruns | ||||
| CethStatsTxOverruns | 1.3.6.1.4.1.1966.12.1.41.1.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxOverruns | ||||
| CethStatsRxFrameErrs | 1.3.6.1.4.1.1966.12.1.41.1.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsRxFrameErrs | ||||
| CethStatsTxCarrierErrs | 1.3.6.1.4.1.1966.12.1.41.1.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsTxCarrierErrs | ||||
| CethStatsCollisions | 1.3.6.1.4.1.1966.12.1.41.1.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current ethStatsCollisions | ||||
| NmodbusGatewayInfo | 1.3.6.1.4.1.1966.12.1.42 | |||
| SmodbusGatewayStatus | 1.3.6.1.4.1.1966.12.1.42.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SmodbusGatewayConnIdleTimeout | 1.3.6.1.4.1.1966.12.1.42.2 | Integer32 (0..300) | RW | |
scalar · Integer32 (0..300) · read-write · current Connection/Idle timeout: 0: never close; 1->300. | ||||
| SmodbusGatewayException | 1.3.6.1.4.1.1966.12.1.42.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable modbus exception. | ||||
| SmodbusGatewayCharacterTimeout | 1.3.6.1.4.1.1966.12.1.42.4 | Integer32 (10..1000) | RW | |
scalar · Integer32 (10..1000) · read-write · current Character timeout. | ||||
| SmodbusGatewayMessageTimeout | 1.3.6.1.4.1.1966.12.1.42.5 | Integer32 (10..1000) | RW | |
scalar · Integer32 (10..1000) · read-write · current Message timeout. | ||||
| SmodbusGatewayPortNumber | 1.3.6.1.4.1.1966.12.1.42.6 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Remote master transport layer (TCP/UDP) port number | ||||
| SmodbusGatewayUIDAddressMode | 1.3.6.1.4.1.1966.12.1.42.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Slave UID address mode.
| ||||
| SmodbusGatewayRemappedUID | 1.3.6.1.4.1.1966.12.1.42.8 | Integer32 (1..247) | RW | |
scalar · Integer32 (1..247) · read-write · current Remapped UID under Remapped address mode | ||||
| SmodbusGatewayBroadcast | 1.3.6.1.4.1.1966.12.1.42.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable propagate Modbus TCP broadcast requests. | ||||
| SmodbusGatewayNextRequestDelay | 1.3.6.1.4.1.1966.12.1.42.10 | Integer32 (0..1000) | RW | |
scalar · Integer32 (0..1000) · read-write · current Delay to allow serial slaves to re-enable receivers before issuing next master request. | ||||
| SmodbusGatewayQueuing | 1.3.6.1.4.1.1966.12.1.42.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable request queuing. | ||||
| SmodbusGatewaySSL | 1.3.6.1.4.1.1966.12.1.42.12 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable modbus slave SSL. | ||||
| SmodbusGatewayIPAliasing | 1.3.6.1.4.1.1966.12.1.42.13 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable modbus slave IP Aliasing. | ||||
| NmodbusStatsInfo | 1.3.6.1.4.1.1966.12.1.43 | |||
| TmodbusSlaveTCPStatsTable | 1.3.6.1.4.1.1966.12.1.43.1 | NA | ||
table · not-accessible · current Modbus TCP Slave Statistics Table. | ||||
| RmodbusSlaveTCPStatsEntry | 1.3.6.1.4.1.1966.12.1.43.1.1 | NA | ||
row · not-accessible · current An entry in the Modbus/TCP Slave statistics table, each relating to a serial port. | ||||
| CmodbusSlaveTCPStatsPortIndex | 1.3.6.1.4.1.1966.12.1.43.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current modbusSlaveTCPStatsPortIndex | ||||
| CmodbusSlaveTCPStatsSerialMode | 1.3.6.1.4.1.1966.12.1.43.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CmodbusSlaveTCPStatsSerialFrameErrors | 1.3.6.1.4.1.1966.12.1.43.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Modbus serial port frame errors | ||||
| TmodbusMasterTCPStatsTable | 1.3.6.1.4.1.1966.12.1.43.2 | NA | ||
table · not-accessible · current Modbus TCP Master Statistics Table. | ||||
| RmodbusMasterTCPStatsEntry | 1.3.6.1.4.1.1966.12.1.43.2.1 | NA | ||
row · not-accessible · current An entry in the Modbus/TCP Master statistics table, each relating to a serial port. | ||||
| CmodbusMasterTCPStatsPortIndex | 1.3.6.1.4.1.1966.12.1.43.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current modbusMasterTCPStatsPortIndex | ||||
| CmodbusMasterTCPStatsSerialMode | 1.3.6.1.4.1.1966.12.1.43.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CmodbusMasterTCPStatsSerialFrameErrors | 1.3.6.1.4.1.1966.12.1.43.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Modbus serial port frame errors | ||||
| TmodbusSlaveUDPStatsTable | 1.3.6.1.4.1.1966.12.1.43.3 | NA | ||
table · not-accessible · current Modbus UDP Slave Statistics Table. | ||||
| RmodbusSlaveUDPStatsEntry | 1.3.6.1.4.1.1966.12.1.43.3.1 | NA | ||
row · not-accessible · current An entry in the Modbus/UDP Slave statistics table, each relating to a serial port. | ||||
| CmodbusSlaveUDPStatsPortIndex | 1.3.6.1.4.1.1966.12.1.43.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current modbusSlaveUDPStatsPortIndex | ||||
| CmodbusSlaveUDPStatsSerialMode | 1.3.6.1.4.1.1966.12.1.43.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CmodbusSlaveUDPStatsSerialFrameErrors | 1.3.6.1.4.1.1966.12.1.43.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Modbus serial port frame errors | ||||
| TmodbusMasterUDPStatsTable | 1.3.6.1.4.1.1966.12.1.43.4 | NA | ||
table · not-accessible · current Modbus UDP Master Statistics Table. | ||||
| RmodbusMasterUDPStatsEntry | 1.3.6.1.4.1.1966.12.1.43.4.1 | NA | ||
row · not-accessible · current An entry in the Modbus/UDP Master statistics table, each relating to a serial port. | ||||
| CmodbusMasterUDPStatsPortIndex | 1.3.6.1.4.1.1966.12.1.43.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current modbusMasterUDPStatsPortIndex | ||||
| CmodbusMasterUDPStatsSerialMode | 1.3.6.1.4.1.1966.12.1.43.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Modbus serial device's mode: 0: RTU; 1: ASCII.
| ||||
| CmodbusMasterUDPStatsSerialFrameErrors | 1.3.6.1.4.1.1966.12.1.43.4.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Modbus serial port frame errors | ||||
| NioModbusSlaveStats | 1.3.6.1.4.1.1966.12.1.43.5 | |||
| SioModbusSlaveStatsServiceMode | 1.3.6.1.4.1.1966.12.1.43.5.1 | OnOffValue | RO | |
scalar · OnOffValue · read-only · current Indicates whether I/O Modbus service is active | ||||
| SioModbusSlaveStatsUid | 1.3.6.1.4.1.1966.12.1.43.5.2 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current I/O Modbus Slave UID | ||||
| SioModbusSlaveStatsCommands | 1.3.6.1.4.1.1966.12.1.43.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current I/O Modbus Slave Commands | ||||
| SioModbusSlaveStatsResponses | 1.3.6.1.4.1.1966.12.1.43.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current I/O Modbus Slave Responses | ||||
| SioModbusSlaveStatsExceptions | 1.3.6.1.4.1.1966.12.1.43.5.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current I/O Modbus Slave Exceptions | ||||
| TmodbusSlaveTCPStatsGatewayTable | 1.3.6.1.4.1.1966.12.1.43.6 | NA | ||
table · not-accessible · current Modbus TCP Slave Gateway Statistics Table. | ||||
| RmodbusSlaveTCPStatsGatewayEntry | 1.3.6.1.4.1.1966.12.1.43.6.1 | NA | ||
row · not-accessible · current An entry in the modbusStatsGatewayTable. | ||||
| CmodbusSlaveTCPStatsGatewayPortIndex | 1.3.6.1.4.1.1966.12.1.43.6.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The port number index | ||||
| CmodbusSlaveTCPStatsGatewayUIDIndex | 1.3.6.1.4.1.1966.12.1.43.6.1.2 | Integer32 (1..247) | NA | |
column · Integer32 (1..247) · not-accessible · current The UID index | ||||
| CmodbusSlaveTCPStatsGatewayRemoteIP | 1.3.6.1.4.1.1966.12.1.43.6.1.3 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The remote slave/master IP address. | ||||
| CmodbusSlaveTCPStatsGatewayUID | 1.3.6.1.4.1.1966.12.1.43.6.1.4 | Integer32 (1..247) | RO | |
column · Integer32 (1..247) · read-only · current The UID. | ||||
| CmodbusSlaveTCPStatsGatewayRemotePortNumber | 1.3.6.1.4.1.1966.12.1.43.6.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The remote TCP/UDP port number. | ||||
| CmodbusSlaveTCPStatsGatewayCommands | 1.3.6.1.4.1.1966.12.1.43.6.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The commands count. | ||||
| CmodbusSlaveTCPStatsGatewayResponses | 1.3.6.1.4.1.1966.12.1.43.6.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The response count. | ||||
| CmodbusSlaveTCPStatsGatewayExceptions | 1.3.6.1.4.1.1966.12.1.43.6.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current the exceptions count. | ||||
| CmodbusSlaveTCPStatsGatewayFrameErrors | 1.3.6.1.4.1.1966.12.1.43.6.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The frame errors count. | ||||
| TmodbusMasterTCPStatsGatewayTable | 1.3.6.1.4.1.1966.12.1.43.7 | NA | ||
table · not-accessible · current Modbus Master TCP Gateway Statistics Table. | ||||
| RmodbusMasterTCPStatsGatewayEntry | 1.3.6.1.4.1.1966.12.1.43.7.1 | NA | ||
row · not-accessible · current An entry in the modbusStatsGatewayTable. | ||||
| CmodbusMasterTCPStatsGatewayPortIndex | 1.3.6.1.4.1.1966.12.1.43.7.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The port number index | ||||
| CmodbusMasterTCPStatsGatewayUIDIndex | 1.3.6.1.4.1.1966.12.1.43.7.1.2 | Integer32 (1..247) | NA | |
column · Integer32 (1..247) · not-accessible · current The UID index | ||||
| CmodbusMasterTCPStatsGatewayRemoteIP | 1.3.6.1.4.1.1966.12.1.43.7.1.3 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The remote slave/master IP address. | ||||
| CmodbusMasterTCPStatsGatewayUID | 1.3.6.1.4.1.1966.12.1.43.7.1.4 | Integer32 (1..247) | RO | |
column · Integer32 (1..247) · read-only · current The UID. | ||||
| CmodbusMasterTCPStatsGatewayRemotePortNumber | 1.3.6.1.4.1.1966.12.1.43.7.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current the remote TCP/UDP port number. | ||||
| CmodbusMasterTCPStatsGatewayCommands | 1.3.6.1.4.1.1966.12.1.43.7.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The commands count. | ||||
| CmodbusMasterTCPStatsGatewayResponses | 1.3.6.1.4.1.1966.12.1.43.7.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The response count. | ||||
| CmodbusMasterTCPStatsGatewayExceptions | 1.3.6.1.4.1.1966.12.1.43.7.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The exceptions count. | ||||
| CmodbusMasterTCPStatsGatewayFrameErrors | 1.3.6.1.4.1.1966.12.1.43.7.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The frame errors count. | ||||
| TmodbusSlaveUDPStatsGatewayTable | 1.3.6.1.4.1.1966.12.1.43.8 | NA | ||
table · not-accessible · current Modbus UDP Slave Gateway Statistics Table. | ||||
| RmodbusSlaveUDPStatsGatewayEntry | 1.3.6.1.4.1.1966.12.1.43.8.1 | NA | ||
row · not-accessible · current An entry in the modbusStatsGatewayTable. | ||||
| CmodbusSlaveUDPStatsGatewayPortIndex | 1.3.6.1.4.1.1966.12.1.43.8.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The port number index | ||||
| CmodbusSlaveUDPStatsGatewayUIDIndex | 1.3.6.1.4.1.1966.12.1.43.8.1.2 | Integer32 (1..247) | NA | |
column · Integer32 (1..247) · not-accessible · current The UID index | ||||
| CmodbusSlaveUDPStatsGatewayRemoteIP | 1.3.6.1.4.1.1966.12.1.43.8.1.3 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The remote slave/master IP address. | ||||
| CmodbusSlaveUDPStatsGatewayUID | 1.3.6.1.4.1.1966.12.1.43.8.1.4 | Integer32 (1..247) | RO | |
column · Integer32 (1..247) · read-only · current The UID. | ||||
| CmodbusSlaveUDPStatsGatewayRemotePortNumber | 1.3.6.1.4.1.1966.12.1.43.8.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current the remote TCP/UDP port number. | ||||
| CmodbusSlaveUDPStatsGatewayCommands | 1.3.6.1.4.1.1966.12.1.43.8.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The commands count. | ||||
| CmodbusSlaveUDPStatsGatewayResponses | 1.3.6.1.4.1.1966.12.1.43.8.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The response count. | ||||
| CmodbusSlaveUDPStatsGatewayExceptions | 1.3.6.1.4.1.1966.12.1.43.8.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The exceptions count. | ||||
| CmodbusSlaveUDPStatsGatewayFrameErrors | 1.3.6.1.4.1.1966.12.1.43.8.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The frame errors count. | ||||
| TmodbusMasterUDPStatsGatewayTable | 1.3.6.1.4.1.1966.12.1.43.9 | NA | ||
table · not-accessible · current Modbus UDP Master Gateway Statistics Table. | ||||
| RmodbusMasterUDPStatsGatewayEntry | 1.3.6.1.4.1.1966.12.1.43.9.1 | NA | ||
row · not-accessible · current An entry in the modbusStatsGatewayTable. | ||||
| CmodbusMasterUDPStatsGatewayPortIndex | 1.3.6.1.4.1.1966.12.1.43.9.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The port number index | ||||
| CmodbusMasterUDPStatsGatewayUIDIndex | 1.3.6.1.4.1.1966.12.1.43.9.1.2 | Integer32 (1..247) | NA | |
column · Integer32 (1..247) · not-accessible · current The UID index | ||||
| CmodbusMasterUDPStatsGatewayRemoteIP | 1.3.6.1.4.1.1966.12.1.43.9.1.3 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The remote slave/master IP address. | ||||
| CmodbusMasterUDPStatsGatewayUID | 1.3.6.1.4.1.1966.12.1.43.9.1.4 | Integer32 (1..247) | RO | |
column · Integer32 (1..247) · read-only · current The UID. | ||||
| CmodbusMasterUDPStatsGatewayRemotePortNumber | 1.3.6.1.4.1.1966.12.1.43.9.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The remote TCP/UDP port number. | ||||
| CmodbusMasterUDPStatsGatewayCommands | 1.3.6.1.4.1.1966.12.1.43.9.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The commands count. | ||||
| CmodbusMasterUDPStatsGatewayResponses | 1.3.6.1.4.1.1966.12.1.43.9.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The response count. | ||||
| CmodbusMasterUDPStatsGatewayExceptions | 1.3.6.1.4.1.1966.12.1.43.9.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The exceptions count. | ||||
| CmodbusMasterUDPStatsGatewayFrameErrors | 1.3.6.1.4.1.1966.12.1.43.9.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The frame errors count. | ||||
| NcustomAppServerInfo | 1.3.6.1.4.1.1966.12.1.44 | |||
| ScustomAppServerStatus | 1.3.6.1.4.1.1966.12.1.44.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ScustomAppServerCommand | 1.3.6.1.4.1.1966.12.1.44.2 | DisplayString (SIZE (1..80)) | RW | |
scalar · DisplayString (SIZE (1..80)) · read-write · current The command line for custom application. | ||||
| NioInfo | 1.3.6.1.4.1.1966.12.1.45 | |||
| NioGlobalCfg | 1.3.6.1.4.1.1966.12.1.45.1 | |||
| SioGlobalCfgStatus | 1.3.6.1.4.1.1966.12.1.45.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current When read, this object indicates the state of all the configuration objects in the ioGlobalCfg group (including all sub-groups and tables). Read values: 'configUnchanged' Indicates that none of the configuration objects have been changed since the last submit operation. 'configChanged' value is read, Indicates that 1 or more of the configuration objects has changed, and a 'submit_changes' operation is required to commit the values from temporary storage to running config. Write values: 'submitChanges' Causes all configuration objects in the ioGlobalCfg group to be committed from temporary storage to running config. 'discardChanges' Causes all changes to configuration objects to be discarded from temporary storage (and replaced with values from running config).
| ||||
| SioTemperatureScale | 1.3.6.1.4.1.1966.12.1.45.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The temperature scale to be used when displaying thermocouple or RTD values
| ||||
| NioFailsafeCfg | 1.3.6.1.4.1.1966.12.1.45.1.3 | |||
| SioFailsafeEnable | 1.3.6.1.4.1.1966.12.1.45.1.3.1 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable I/O failsafe timer | ||||
| SioFailsafeTimeout | 1.3.6.1.4.1.1966.12.1.45.1.3.2 | Integer32 (1..9999) | RW | |
scalar · Integer32 (1..9999) · read-write · current I/O failsafe timeout, in seconds | ||||
| NioModbusCfg | 1.3.6.1.4.1.1966.12.1.45.1.4 | |||
| SioModbusEnable | 1.3.6.1.4.1.1966.12.1.45.1.4.1 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable I/O Modbus service | ||||
| SioModbusUid | 1.3.6.1.4.1.1966.12.1.45.1.4.2 | Integer32 (0..255) | RW | |
scalar · Integer32 (0..255) · read-write · current I/O Modbus UID | ||||
| NioUdpCfg | 1.3.6.1.4.1.1966.12.1.45.1.5 | |||
| SioUdpEnable | 1.3.6.1.4.1.1966.12.1.45.1.5.1 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable I/O UDP service | ||||
| SioUdpBroadcastInterval | 1.3.6.1.4.1.1966.12.1.45.1.5.2 | Integer32 (1..9999) | RW | |
scalar · Integer32 (1..9999) · read-write · current I/O UDP broadcast interval, in seconds | ||||
| TioUdpTable | 1.3.6.1.4.1.1966.12.1.45.1.5.3 | NA | ||
table · not-accessible · current Port UDP Table. | ||||
| RioUdpEntry | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1 | NA | ||
row · not-accessible · current An entry in the ioUdpEntry, each relating to a port.
| ||||
| CioUdpEntryIndex | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current ioUdpNumber | ||||
| CioUdpEntryEnable | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.2 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this UDP entry | ||||
| CioUdpEntryStartAddress | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server send messages to | ||||
| CioUdpEntryEndAddress | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will send messages to. | ||||
| CioUdpEntryPort | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port that the Device Server will use to relay messages to servers/hosts. | ||||
| CioUdpEntryTunnelName | 1.3.6.1.4.1.1966.12.1.45.1.5.3.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| NioTrueportCfg | 1.3.6.1.4.1.1966.12.1.45.1.6 | |||
| SioTrueportEnable | 1.3.6.1.4.1.1966.12.1.45.1.6.1 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable I/O TruePort service | ||||
| SioTrueportTcpListenPort | 1.3.6.1.4.1.1966.12.1.45.1.6.2 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current I/O TruePort TCP Listening Port | ||||
| SioTrueportSslEnable | 1.3.6.1.4.1.1966.12.1.45.1.6.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable I/O TruePort SSL | ||||
| NioChannelInfo | 1.3.6.1.4.1.1966.12.1.45.2 | |||
| NioChannelCfg | 1.3.6.1.4.1.1966.12.1.45.2.1 | |||
| NioAnalogCfg | 1.3.6.1.4.1.1966.12.1.45.2.1.1 | |||
| TioAnalogCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1 | NA | ||
table · not-accessible · current ioAnalogCfgTable. | ||||
| RioAnalogCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1 | NA | ||
| CioAnalogChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O analog channel resource index | ||||
| CioAnalogCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current NOTE: This object also applies to the corresponding rows in ioAnalogAlarmCfgTable. e.g. If changes are submitted to row 1 of this table (i.e. channel 1), then changes will also be submitted for all rows in ioAnalogAlarmCfgTable where ioAnalogAlarmCfgChannelIndex is equal to 1. When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioAnalogCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this analog I/O resource | ||||
| CioAnalogCfgDescription | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.4 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Description for the I/O resource | ||||
| CioAnalogCfgType | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Analog I/O resource type. For current and voltage types, please note that the corresponding hardware jumpers must be set accordingly.
| ||||
| CioAnalogCfgRtdRange | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Range for RTD analog I/O
| ||||
| CioAnalogCfgThermRange | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Range for thermocouple analog I/O
| ||||
| CioAnalogCfgCurrentRange | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Range for current-measuring analog I/O
| ||||
| CioAnalogCfgVoltageRange | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Range for voltage-measuring analog I/O
| ||||
| CioAnalogCfgAlarmTrigger | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Analog I/O alarm trigger type
| ||||
| CioAnalogCfgAlarmClearMode | 1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Analog I/O alarm clear mode
| ||||
| TioAnalogAlarmCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2 | NA | ||
table · not-accessible · current ioAnalogAlarmCfgTable. | ||||
| RioAnalogAlarmCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1 | NA | ||
row · not-accessible · current An entry in the ioAnalogAlarmCfgTable | ||||
| CioAnalogAlarmCfgChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Channel Index | ||||
| CioAnalogAlarmCfgEntryIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Entry Index | ||||
| CioAnalogCfgAlarmEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable I/O analog alarm entry | ||||
| CioAnalogCfgAlarmTriggerLevel | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Trigger level for I/O analog alarm (floating point value) | ||||
| CioAnalogCfgAlarmClearLevel | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current Clear level for non-latching I/O analog alarm (floating point value) | ||||
| CioAnalogCfgAlarmEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable email notification on triggered analog alarm | ||||
| CioAnalogCfgAlarmSyslog | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable syslog notification on triggered analog alarm | ||||
| CioAnalogCfgAlarmSNMP | 1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable SNMP trap notification on triggered analog alarm | ||||
| NioDigitalCfg | 1.3.6.1.4.1.1966.12.1.45.2.1.2 | |||
| TioDigitalCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1 | NA | ||
table · not-accessible · current ioDigitalCfgTable. | ||||
| RioDigitalCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1 | NA | ||
| CioDigitalChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O digital channel resource index | ||||
| CioDigitalCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalCfgResourceType | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set your digital I/O resource type to Input or Output using this object. Please note that the corresponding hardware jumpers must be set accordingly.
| ||||
| CioDigitalCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this digital I/O channel | ||||
| CioDigitalCfgDescription | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Description for this digital I/O | ||||
| CioDigitalInputCfgLatch | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Input: Latch type
| ||||
| CioDigitalInputCfgInvertSignal | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Digital Input: Enable/disable signal inversion | ||||
| CioDigitalInputCfgAlarmTrigger | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Input: Alarm trigger type
| ||||
| CioDigitalInputCfgAlarmClear | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Input: Clear alarm - manual/automatic
| ||||
| CioDigitalInputCfgAlarmEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current Digital Input: Enable/disable email alert on triggered alarm | ||||
| CioDigitalInputCfgAlarmSyslog | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current Digital Input: Enable/disable syslog alert on triggered alarm | ||||
| CioDigitalInputCfgAlarmSNMP | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12 | OnOffValue | RW | |
column · OnOffValue · read-write · current Digital Input: Enable/disable SNMP trap on triggered alarm | ||||
| CioDigitalOutputCfgType | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Output: Output type
| ||||
| CioDigitalOutputCfgMode | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Output: Output mode
| ||||
| CioDigitalOutputCfgPulseMode | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Output: Pulse mode (counted or continuous)
| ||||
| CioDigitalOutputCfgPulseCount | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Digital Output: Pulse count (only applies to counted pulse mode) | ||||
| CioDigitalOutputCfgInactiveSignalWidth | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Digital Output: Inactive signal width, in 100 ms units (only applies to pulse mode) | ||||
| CioDigitalOutputCfgActiveSignalWidth | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Digital Output: Active signal width, in 100 ms units (only applies to pulse mode) | ||||
| CioDigitalOutputCfgDelay | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Digital Output: Delay time, in 100 ms units (only applies to delay mode) | ||||
| CioDigitalOutputCfgFailsafe | 1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current Digital Output: Failsafe action - choose the action that will take place when the failsafe timer expires
| ||||
| TioDigitalExtensionCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2 | NA | ||
table · not-accessible · current I/O Digial Extention Table. | ||||
| RioDigitalExtensionCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1 | NA | ||
row · not-accessible · current An entry in the ioDigitalExtensionCfgTable | ||||
| CioDigitalExtCfgChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O resource index | ||||
| CioDigitalExtCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalExtCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this digital I/O Extension | ||||
| CioDigitalExtCfgConnMethod | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the type of connection being established Listen for connection, Connect to Host, or Local
| ||||
| CioDigitalExtCfgHost | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CioDigitalExtCfgPort | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming/outgoing connections. | ||||
| CioDigitalExtCfgLinkChannel | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.7 | DisplayString (SIZE (0..10)) | RW | |
column · DisplayString (SIZE (0..10)) · read-write · current The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input | ||||
| CioDigitalExtCfgKeepalive | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active OR causing a dropped connection condition to be recognized by the reverse raw service. Applications using this feature need to be aware that there might be some considerable delay between a network disconnection and the port being available for the next connection attempt; this is to allow any data sent on prior connections to be transmitted out of the serial port buffer. Application network retry logic needs to accommodate this feature. | ||||
| CioDigitalExtCfgMultiHost | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Allows user to configure the multihost for client/server initiated connections | ||||
| CioDigitalExtCfgTunnelName | 1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.10 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the Rlogin service. | ||||
| TioDigitalMultihostTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.3 | NA | ||
table · not-accessible · current I/O Digial Multihost Table. | ||||
| RioDigitalMultihostEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1 | NA | ||
row · not-accessible · current An entry in the ioDigitalMultihostEntry, each relating to digital io channel. | ||||
| CioDigitalMultihostIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current ioDigitalMultihostIndex | ||||
| CioDigitalMultihostStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalMultihostMode | 1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode
| ||||
| TioDigitalMultihostOutboundTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4 | NA | ||
table · not-accessible · current Multihost outbound table. | ||||
| RioDigitalMultihostOutboundEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1 | NA | ||
row · not-accessible · current An entry in the ioDigitalMultihostOutboundTable. | ||||
| CioDigitalMultihostChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Channel Index | ||||
| CioDigitalMultihostOutboundIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The outbound entry number | ||||
| CioDigitalMultihostOutboundStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalMultihostOutboundHostID | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host name. | ||||
| CioDigitalMultihostOutboundTcpPort | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The host TCP port. | ||||
| CioDigitalMultihostOutboundTunnel | 1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with this host. | ||||
| TioDigitalSSLTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5 | NA | ||
table · not-accessible · current io SSL Table. | ||||
| RioDigitalSSLEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1 | NA | ||
row · not-accessible · current An entry in the ioDigitalSSLEntry, each relating to a io.
| ||||
| CioDigitalSSLIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current io Digital SSL Index | ||||
| CioDigitalSSLStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalSSLEnabled | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables SSL. | ||||
| CioDigitalSSLuseServer | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Uses the SSL/TLS server configuration for the line. | ||||
| CioDigitalSSLVersion | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection will use only TLSv1.
SSLv3-The connection will use only SSLv3.
The default is Any.
| ||||
| CioDigitalSSLType | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.
| ||||
| CioDigitalSSLVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| CioDigitalSSLCountry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.8 | DisplayString (SIZE (0..2)) | RW | |
column · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| CioDigitalSSLStateProv | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.9 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| CioDigitalSSLLocality | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.10 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| CioDigitalSSLOrganisation | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.11 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| CioDigitalSSLOrganisationUnit | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.12 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| CioDigitalSSLCommonName | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.13 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| CioDigitalSSLEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.14 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| TioDigitalSSLCipherTable | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6 | NA | ||
table · not-accessible · current Digital SSL Cipher. | ||||
| RioDigitalSSLCipherEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1 | NA | ||
row · not-accessible · current An entry in the sslCipherTable, each relating to a cipher entry. | ||||
| CioDigitalSSLChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The io number | ||||
| CioDigitalSSLCipherIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.2 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CioDigitalSSLCipherStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioDigitalSSLCipherEncryption | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CioDigitalSSLCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CioDigitalSSLCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CioDigitalSSLCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CioDigitalSSLCipherHMAC | 1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NioRelayCfg | 1.3.6.1.4.1.1966.12.1.45.2.1.3 | |||
| TioRelayCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1 | NA | ||
table · not-accessible · current ioRelayCfgTable. | ||||
| RioRelayCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1 | NA | ||
| CioRelayChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O relay channel resource index | ||||
| CioRelayCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelayCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this Relay I/O channel | ||||
| CioRelayCfgDescription | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.4 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Description for this relay | ||||
| CioRelayCfgMode | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Relay output mode
| ||||
| CioRelayCfgPulseMode | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Relay pulse mode (only applies when output mode is set to 'pulse'
| ||||
| CioRelayCfgPulseCount | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.7 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Relay pulse count; only applies for counted pulse mode | ||||
| CioRelayCfgInactiveSignalWidth | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.8 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Relay inactive signal width in 100 ms units; only applies to pulse mode | ||||
| CioRelayCfgActiveSignalWidth | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.9 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Relay active signal width in 100 ms units; only applies to pulse mode | ||||
| CioRelayCfgDelay | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.10 | Integer32 (1..9999) | RW | |
column · Integer32 (1..9999) · read-write · current Relay pulse delay, in 100 ms units; only applies to delay mode | ||||
| CioRelayCfgFailsafe | 1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Action to take when the failsafe timer expires
| ||||
| TioRelayExtensionCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2 | NA | ||
table · not-accessible · current ioRelayExtensionCfgTable | ||||
| RioRelayExtensionCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1 | NA | ||
| CioRelayExtCfgChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O Relay channel resource index | ||||
| CioRelayExtCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelayExtCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this digital I/O Extension | ||||
| CioRelayExtCfgConnMethod | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the type of connection being established Listen for connection, Connect to Host, or Local
| ||||
| CioRelayExtCfgHost | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CioRelayExtCfgPort | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming/outgoing connections. | ||||
| CioRelayExtCfgLinkChannel | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.7 | DisplayString (SIZE (0..10)) | RW | |
column · DisplayString (SIZE (0..10)) · read-write · current The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input | ||||
| CioRelayExtCfgKeepalive | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active OR causing a dropped connection condition to be recognized by the reverse raw service. Applications using this feature need to be aware that there might be some considerable delay between a network disconnection and the port being available for the next connection attempt; this is to allow any data sent on prior connections to be transmitted out of the serial port buffer. Application network retry logic needs to accommodate this feature. | ||||
| CioRelayExtCfgMultiHost | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Allows user to configure the multihost for client/server initiated connections | ||||
| CioRelayExtCfgTunnelName | 1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.10 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the Rlogin service. | ||||
| TioRelayMultihostTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.3 | NA | ||
table · not-accessible · current I/O Multihost Table. | ||||
| RioRelayMultihostEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1 | NA | ||
row · not-accessible · current An entry in the ioRelayMultihostEntry, each relating to digital io channel. | ||||
| CioRelayMultihostIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current ioRelayMultihostChanIndex | ||||
| CioRelayMultihostStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelayMultihostMode | 1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode
| ||||
| TioRelayMultihostOutboundTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4 | NA | ||
table · not-accessible · current Multihost outbound table. | ||||
| RioRelayMultihostOutboundEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1 | NA | ||
row · not-accessible · current An entry in the ioRelayMultihostOutboundTable. | ||||
| CioRelayMultihostChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Channel Index | ||||
| CioRelayMultihostOutboundIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The outbound entry number | ||||
| CioRelayMultihostOutboundStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelayMultihostOutboundHostID | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host name. | ||||
| CioRelayMultihostOutboundTcpPort | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The host TCP port. | ||||
| CioRelayMultihostOutboundTunnel | 1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with this host. | ||||
| TioRelaySSLTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5 | NA | ||
table · not-accessible · current io Relay SSL Table. | ||||
| RioRelaySSLEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1 | NA | ||
row · not-accessible · current An entry in the ioRelaySSLEntry, each relating to a io.
| ||||
| CioRelaySSLIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current io Relay SSL Index | ||||
| CioRelaySSLStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelaySSLEnabled | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables SSL. | ||||
| CioRelaySSLuseServer | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Uses the SSL/TLS server configuration for the line. | ||||
| CioRelaySSLVersion | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection will use only TLSv1.
SSLv3-The connection will use only SSLv3.
The default is Any.
| ||||
| CioRelaySSLType | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.
| ||||
| CioRelaySSLVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| CioRelaySSLCountry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.8 | DisplayString (SIZE (0..2)) | RW | |
column · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| CioRelaySSLStateProv | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.9 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| CioRelaySSLLocality | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.10 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| CioRelaySSLOrganisation | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.11 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| CioRelaySSLOrganisationUnit | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.12 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| CioRelaySSLCommonName | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.13 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| CioRelaySSLEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.14 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| TioRelaySSLCipherTable | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6 | NA | ||
table · not-accessible · current SSL CIpher. | ||||
| RioRelaySSLCipherEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1 | NA | ||
row · not-accessible · current An entry in the sslCipherTable, each relating to a cipher entry. | ||||
| CioRelaySSLChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The io number | ||||
| CioRelaySSLCipherIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.2 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CioRelaySSLCipherStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioRelaySSLCipherEncryption | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CioRelaySSLCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CioRelaySSLCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CioRelaySSLCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CioRelaySSLCipherHMAC | 1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NioLineSignalCfg | 1.3.6.1.4.1.1966.12.1.45.2.1.4 | |||
| TioLineSignalCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1 | NA | ||
table · not-accessible · current ioLineSignalCfgTable. | ||||
| RioLineSignalCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1 | NA | ||
row · not-accessible · current An entry in the ioLineSignalCfgTable | ||||
| CioLineSignalCfgPortIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index of the associated serial port | ||||
| CioLineSignalCfgSignalIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Index of the associate line signal
| ||||
| CioLineSignalCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineSignalCfgResourceType | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Signifies whether this resource is input or output
| ||||
| CioLineSignalCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this resource | ||||
| CioLineSignalCfgDescription | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.6 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current Description for this resource | ||||
| CioLineSignalInputCfgLatch | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Line Signal (input): Latch mode
| ||||
| CioLineSignalInputCfgInvertSignal | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Line Signal (input): Enable/disable signal inversion | ||||
| CioLineSignalInputCfgAlarmTrigger | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Line Signal (input): Alarm trigger type
| ||||
| CioLineSignalInputCfgAlarmClear | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Line Signal (input): Alarm clear type
| ||||
| CioLineSignalInputCfgAlarmEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.11 | OnOffValue | RW | |
column · OnOffValue · read-write · current Line Signal (input): Enable/disable email alert on alarm trigger | ||||
| CioLineSignalInputCfgAlarmSyslog | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.12 | OnOffValue | RW | |
column · OnOffValue · read-write · current Line Signal (input): Enable/disable syslog alert on alarm trigger | ||||
| CioLineSignalInputCfgAlarmSNMP | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.13 | OnOffValue | RW | |
column · OnOffValue · read-write · current Line Signal (input): Enable/disable SNMP alert on alarm trigger | ||||
| CioLineSignalOutputCfgFailsafe | 1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Line Signal (output): Action to take when failsafe timer expires
| ||||
| TioLineExtensionSigCfgTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2 | NA | ||
table · not-accessible · current ioLineExtensionSigCfgTable | ||||
| RioLineExtensionSigCfgEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1 | NA | ||
| CioLineExtSigCfgChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current I/O resource index | ||||
| CioLineExtSigCfgStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineExtSigCfgEnable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable this digital I/O Extension | ||||
| CioLineExtSigCfgConnMethod | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the type of connection being established Listen for connection, Connect to Host, or Local
| ||||
| CioLineExtSigCfgHost | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.5 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the target host. | ||||
| CioLineExtSigCfgPort | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.6 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The port number the target host is listening on for incoming/outgoing connections. | ||||
| CioLineExtSigCfgLinkChannel | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.7 | DisplayString (SIZE (0..10)) | RW | |
column · DisplayString (SIZE (0..10)) · read-write · current The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input | ||||
| CioLineExtSigCfgKeepalive | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active OR causing a dropped connection condition to be recognized by the reverse raw service. Applications using this feature need to be aware that there might be some considerable delay between a network disconnection and the port being available for the next connection attempt; this is to allow any data sent on prior connections to be transmitted out of the serial port buffer. Application network retry logic needs to accommodate this feature. | ||||
| CioLineExtSigCfgMultiHost | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Allows user to configure the multihost for client/server initiated connections | ||||
| CioLineExtSigCfgTunnelName | 1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.10 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with the Rlogin service. | ||||
| TioLineMultihostSigTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.3 | NA | ||
table · not-accessible · current I/O Multihost Table. | ||||
| RioLineMultihostSigEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1 | NA | ||
row · not-accessible · current An entry in the ioLineMultihostEntry, each relating to digital io channel. | ||||
| CioLineMultihostSigIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current ioLineMultihostSigIndex | ||||
| CioLineMultihostSigStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineMultihostModeSig | 1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode
| ||||
| TioLineMultihostOutboundSigTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4 | NA | ||
table · not-accessible · current Multihost outbound table. | ||||
| RioLineMultihostOutboundSigEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1 | NA | ||
row · not-accessible · current An entry in the ioLineMultihostOutboundTable. | ||||
| CioLineMultihostSigChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Channel Index | ||||
| CioLineMultihostOutboundSigIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.2 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The outbound entry number | ||||
| CioLineMultihostOutboundSigStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineMultihostOutboundSigHostID | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The host name. | ||||
| CioLineMultihostOutboundSigTcpPort | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The host TCP port. | ||||
| CioLineMultihostOutboundSigTunnel | 1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The HTTP tunnel associated with this host. | ||||
| TioLineSSLSigTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5 | NA | ||
table · not-accessible · current io SSL Table. | ||||
| RioLineSSLSigEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1 | NA | ||
row · not-accessible · current An entry in the ioDigitalSSLEntry, each relating to a io.
| ||||
| CioLineSSLSigIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current io SSL Index | ||||
| CioLineSSLSigStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineSSLSigEnabled | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enables/disables SSL. | ||||
| CioLineSSLSiguseServer | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.4 | OnOffValue | RW | |
column · OnOffValue · read-write · current Uses the SSL/TLS server configuration for the line. | ||||
| CioLineSSLSigVersion | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether you want to use:
Any-The Device Server will try a TLSv1 connection first.
If that fails, it will try an SSLv3 connection.
If that fails, it will try an SSLv2 connection.
TLSv1-The connection will use only TLSv1.
SSLv3-The connection will use only SSLv3.
The default is Any.
| ||||
| CioLineSSLSigType | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.
| ||||
| CioLineSSLSigVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| CioLineSSLSigCountry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.8 | DisplayString (SIZE (0..2)) | RW | |
column · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| CioLineSSLSigStateProv | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.9 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| CioLineSSLSigLocality | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.10 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| CioLineSSLSigOrganisation | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.11 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| CioLineSSLSigOrganisationUnit | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.12 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| CioLineSSLSigCommonName | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.13 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| CioLineSSLSigEmail | 1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.14 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| TioLineSSLSigCipherTable | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6 | NA | ||
table · not-accessible · current SSL CIpher. | ||||
| RioLineSSLSigCipherEntry | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1 | NA | ||
row · not-accessible · current An entry in the sslCipherTable, each relating to a cipher entry. | ||||
| CioLineSSLSigChanIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The io number | ||||
| CioLineSSLSigCipherIndex | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.2 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CioLineSSLSigCipherStatus | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.3 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CioLineSSLSigCipherEncryption | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CioLineSSLSigCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CioLineSSLSigCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CioLineSSLSigCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CioLineSSLSigCipherHMAC | 1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NioChannelStatus | 1.3.6.1.4.1.1966.12.1.45.2.2 | |||
| SioChannelFunction | 1.3.6.1.4.1.1966.12.1.45.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current killall - Apply configuration changes to all channels
| ||||
| NioAnalogStatus | 1.3.6.1.4.1.1966.12.1.45.2.2.2 | |||
| TioAnalogStatusTable | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1 | NA | ||
table · not-accessible · current ioAnalogStatusTable. | ||||
| RioAnalogStatusEntry | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1 | NA | ||
| CioAnalogStatusChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CioAnalogStatusEnabled | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.2 | OnOffValue | RO | |
column · OnOffValue · read-only · current Enabled | ||||
| CioAnalogStatusDescription | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.3 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Description | ||||
| CioAnalogFunction | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current kill - Apply configuration changes to this entry
| ||||
| CioAnalogStatusInputState | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Input state.
| ||||
| CioAnalogStatusValue | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Current analog input value. | ||||
| CioAnalogStatusMinimum | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Minimum analog input value. | ||||
| CioAnalogStatusMaximum | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current Maximum analog input value. | ||||
| CioAnalogStatusAlarmLevel | 1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.9 | Integer32 (0..5) | RO | |
column · Integer32 (0..5) · read-only · current Alarm level. | ||||
| NioDigitalStatus | 1.3.6.1.4.1.1966.12.1.45.2.2.3 | |||
| TioDigitalStatusTable | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1 | NA | ||
table · not-accessible · current ioDigitalStatusTable. | ||||
| RioDigitalStatusEntry | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1 | NA | ||
| CioDigitalStatusChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CioDigitalStatusEnabled | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.2 | OnOffValue | RO | |
column · OnOffValue · read-only · current Enabled | ||||
| CioDigitalStatusDescription | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.3 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Description | ||||
| CioDigitalStatusType | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Resource type
| ||||
| CioDigitalFunction | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current kill - Apply configuration changes to this entry
| ||||
| CioDigitalStatusState | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Digital State. .
| ||||
| CioDigitalStatusLatchedInputState | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current For digital inputs only.
| ||||
| CioDigitalStatusInputAlarm | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current LineSignal State. .
| ||||
| CioDigitalStatusExtensionState | 1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current For digital inputs and outputs only.
| ||||
| NioRelayStatus | 1.3.6.1.4.1.1966.12.1.45.2.2.4 | |||
| TioRelayStatusTable | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1 | NA | ||
table · not-accessible · current ioRelayStatusTable. | ||||
| RioRelayStatusEntry | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1 | NA | ||
| CioRelayStatusChannelIndex | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CioRelayStatusEnabled | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.2 | OnOffValue | RO | |
column · OnOffValue · read-only · current Enabled | ||||
| CioRelayStatusDescription | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.3 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Description | ||||
| CioRelayFunction | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current kill - Apply configuration changes to this entry
| ||||
| CioRelayStatusState | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Relay State. .
| ||||
| CioRelayStatusExtensionState | 1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current For digital inputs/outputs/relays only.
| ||||
| NioLineSignalStatus | 1.3.6.1.4.1.1966.12.1.45.2.2.5 | |||
| TioLineSignalStatusTable | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1 | NA | ||
table · not-accessible · current ioLineSignalStatusTable. | ||||
| RioLineSignalStatusEntry | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1 | NA | ||
row · not-accessible · current An entry in the ioLineSignalStatusTable | ||||
| CioLineSignalStatusPortIndex | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Index | ||||
| CioLineSignalStatusSignalIndex | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Index
| ||||
| CioLineSignalStatusEnabled | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.3 | OnOffValue | RO | |
column · OnOffValue · read-only · current Enabled | ||||
| CioLineSignalStatusDescription | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.4 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Description | ||||
| CioLineSignalStatusType | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current resource type
| ||||
| CioLineSignalFunction | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current kill - Apply configuration changes to this entry
| ||||
| CioLineSignalStatusState | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current LineSignal State. .
| ||||
| CioLineSignalStatusLatchedInputState | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current LineSignal State. .
| ||||
| CioLineSignalStatusInputAlarm | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current LineSignal State. .
| ||||
| CioLineSignalStatusExtensionState | 1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current For serial inputs and outputs only.
| ||||
| NclusteringInfo | 1.3.6.1.4.1.1966.12.1.46 | |||
| TclusteringTable | 1.3.6.1.4.1.1966.12.1.46.1 | NA | ||
table · not-accessible · current The Clustering table. | ||||
| RclusteringEntry | 1.3.6.1.4.1.1966.12.1.46.1.1 | NA | ||
row · not-accessible · current An entry in the clusteringEntry, each relating to a port.
| ||||
| CclusteringIndex | 1.3.6.1.4.1.1966.12.1.46.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number. | ||||
| CclusteringStatus | 1.3.6.1.4.1.1966.12.1.46.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CclusteringServerName | 1.3.6.1.4.1.1966.12.1.46.1.1.3 | DisplayString (SIZE (1..15)) | RW | |
column · DisplayString (SIZE (1..15)) · read-write · current The slave server's name. | ||||
| CclusteringSlaveIP | 1.3.6.1.4.1.1966.12.1.46.1.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The remote slave server's IP address. | ||||
| CclusteringPort | 1.3.6.1.4.1.1966.12.1.46.1.1.5 | GenericTableIndex | RW | |
column · GenericTableIndex · read-write · current The port number on the clustered slave server. | ||||
| CclusteringPortName | 1.3.6.1.4.1.1966.12.1.46.1.1.6 | DisplayString (SIZE (1..54)) | RW | |
column · DisplayString (SIZE (1..54)) · read-write · current The slave server's port name. | ||||
| CclusteringSlavePort | 1.3.6.1.4.1.1966.12.1.46.1.1.7 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current The starting TCP port on the slave server. | ||||
| CclusteringMasterPort | 1.3.6.1.4.1.1966.12.1.46.1.1.8 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current The starting TCP port on the master server. | ||||
| CclusteringProtocol | 1.3.6.1.4.1.1966.12.1.46.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The protocol used to connect between the slave and server.
| ||||
| CclusteringSlaveIPTunnel | 1.3.6.1.4.1.1966.12.1.46.1.1.10 | DisplayString (SIZE (1..14)) | RW | |
column · DisplayString (SIZE (1..14)) · read-write · current The HTTP tunnel associated with the slave IP | ||||
| NdynamicDNSInfo | 1.3.6.1.4.1.1966.12.1.47 | |||
| SdynamicDNSStatus | 1.3.6.1.4.1.1966.12.1.47.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SdynamicDNSEnabled | 1.3.6.1.4.1.1966.12.1.47.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable dynamic DNS. | ||||
| SdynamicDNSHostname | 1.3.6.1.4.1.1966.12.1.47.3 | DisplayString (SIZE (1..14)) | RW | |
scalar · DisplayString (SIZE (1..14)) · read-write · current Host name. | ||||
| SdynamicDNSUserName | 1.3.6.1.4.1.1966.12.1.47.4 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current user name. | ||||
| SdynamicDNSPassword | 1.3.6.1.4.1.1966.12.1.47.5 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current Password. | ||||
| SdynamicDNSSystemType | 1.3.6.1.4.1.1966.12.1.47.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current System type.
| ||||
| SdynamicDNSWildcard | 1.3.6.1.4.1.1966.12.1.47.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current wildcard.
| ||||
| SdynamicDNSConnectionMethod | 1.3.6.1.4.1.1966.12.1.47.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current connection method.
| ||||
| SdynamicDNSSSLVerifyPeerCertificate | 1.3.6.1.4.1.1966.12.1.47.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the Device Server. Any values that are entered in the validation criteria must match the peer certificate for an SSL connection; any fields left blank will not be validated against the peer certificate. | ||||
| SdynamicDNSSSLCountry | 1.3.6.1.4.1.1966.12.1.47.10 | DisplayString (SIZE (0..2)) | RW | |
scalar · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| SdynamicDNSSSLStateProv | 1.3.6.1.4.1.1966.12.1.47.11 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| SdynamicDNSSSLLocality | 1.3.6.1.4.1.1966.12.1.47.12 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| SdynamicDNSSSLOrganisation | 1.3.6.1.4.1.1966.12.1.47.13 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| SdynamicDNSSSLOrganisationUnit | 1.3.6.1.4.1.1966.12.1.47.14 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| SdynamicDNSSSLCommonName | 1.3.6.1.4.1.1966.12.1.47.15 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| SdynamicDNSSSLEmail | 1.3.6.1.4.1.1966.12.1.47.16 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| SdynamicDNSStatusString | 1.3.6.1.4.1.1966.12.1.47.17 | OCTET STRING (SIZE (0..1024)) | RO | |
scalar · OCTET STRING (SIZE (0..1024)) · read-only · current Dynamic DNS statistics | ||||
| TdynamicDNSSSLCipherTable | 1.3.6.1.4.1.1966.12.1.47.18 | NA | ||
table · not-accessible · current SSL CIpher. | ||||
| RdynamicDNSSSLCipherEntry | 1.3.6.1.4.1.1966.12.1.47.18.1 | NA | ||
row · not-accessible · current An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry. | ||||
| CdynamicDNSSSLCipherPriority | 1.3.6.1.4.1.1966.12.1.47.18.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The cipher priority. 1- highest 5 - lowest. | ||||
| CdynamicDNSSSLCipherStatus | 1.3.6.1.4.1.1966.12.1.47.18.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CdynamicDNSSSLCipherEncryption | 1.3.6.1.4.1.1966.12.1.47.18.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.
| ||||
| CdynamicDNSSSLCipherKeySizeMin | 1.3.6.1.4.1.1966.12.1.47.18.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum key size value that will be used for the specified encryption type. The default is 40.
| ||||
| CdynamicDNSSSLCipherKeySizeMax | 1.3.6.1.4.1.1966.12.1.47.18.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum key size value that will be used for the specified encryption type. The default is 256.
| ||||
| CdynamicDNSSSLCipherKeyExchange | 1.3.6.1.4.1.1966.12.1.47.18.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does
not, however, include ADH keys).
RSA-This is an RSA key exchange using an RSA key and
certificate.
EDHRSA-This is an EDH key exchange using an RSA key
and certificate.
EDHDSS-This is an EDH key exchange using a DSA key
and certificate.
ADH-This is an anonymous key exchange which does not
require a private key or certificate. Choose this
key if you do not want to authenticate the peer device,
but you want the data encrypted on the SSL/TLS connection.
The default is Any.
| ||||
| CdynamicDNSSSLCipherHMAC | 1.3.6.1.4.1.1966.12.1.47.18.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.
| ||||
| NpciInfo | 1.3.6.1.4.1.1966.12.1.48 | |||
| NpciCardInfo | 1.3.6.1.4.1.1966.12.1.48.1 | |||
| SpciCardStatus | 1.3.6.1.4.1.1966.12.1.48.1.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SpciCardType | 1.3.6.1.4.1.1966.12.1.48.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current PCI Card Type
| ||||
| NpciWwanInfo | 1.3.6.1.4.1.1966.12.1.48.2 | |||
| SwwanCardStatus | 1.3.6.1.4.1.1966.12.1.48.2.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SwwanCardType | 1.3.6.1.4.1.1966.12.1.48.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Wireless Wan Card Type
| ||||
| SwwanAPN | 1.3.6.1.4.1.1966.12.1.48.2.3 | DisplayString (SIZE (0..60)) | RW | |
scalar · DisplayString (SIZE (0..60)) · read-write · current Specify the APN required by your internet provider to access their network. See the Internet provider documentation for more information. | ||||
| SwwanUserName | 1.3.6.1.4.1.1966.12.1.48.2.4 | DisplayString (SIZE (0..254)) | RW | |
scalar · DisplayString (SIZE (0..254)) · read-write · current Specify the name required by your Internet provider to access their network. | ||||
| SwwanPhoneNumer | 1.3.6.1.4.1.1966.12.1.48.2.5 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Specify the phone number provided by your service provider to access their wireless network. Probably similar to *99***1# | ||||
| SwwanInitString | 1.3.6.1.4.1.1966.12.1.48.2.6 | DisplayString (SIZE (0..60)) | RW | |
scalar · DisplayString (SIZE (0..60)) · read-write · current Specify the initialization string required by your Internet service provider for your wireless WAN card. | ||||
| SwwanNetworkRegistration | 1.3.6.1.4.1.1966.12.1.48.2.7 | Integer32 (0..5) | RO | |
scalar · Integer32 (0..5) · read-only · current Network Registration. Possible Values 0 - Not Registered. Not searching for a network, 1 - Registered. Home Network, 2 - Not Registered. Searching for a network, 3 - Registration Denied 4 - Unknown, 5 - Registered. Roaming | ||||
| SwwanSignalStrength | 1.3.6.1.4.1.1966.12.1.48.2.8 | Integer32 (0..4294967) | RO | |
scalar · Integer32 (0..4294967) · read-only · current Signal Strength | ||||
| NpciFiberLanInfo | 1.3.6.1.4.1.1966.12.1.48.3 | |||
| SpciFiberLanStatus | 1.3.6.1.4.1.1966.12.1.48.3.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SpciFiberLanType | 1.3.6.1.4.1.1966.12.1.48.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current PCI Fiber LAN Card Type
| ||||
| NpciUsbInfo | 1.3.6.1.4.1.1966.12.1.48.4 | |||
| SusbStatus | 1.3.6.1.4.1.1966.12.1.48.4.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SusbAPN | 1.3.6.1.4.1.1966.12.1.48.4.2 | DisplayString (SIZE (0..60)) | RW | |
scalar · DisplayString (SIZE (0..60)) · read-write · current Specify the APN required by your internet provider to access their network. See the Internet provider documentation for more information. | ||||
| SusbUserName | 1.3.6.1.4.1.1966.12.1.48.4.3 | DisplayString (SIZE (0..254)) | RW | |
scalar · DisplayString (SIZE (0..254)) · read-write · current Specify the name required by your Internet provider to access their network. | ||||
| SusbPhoneNumer | 1.3.6.1.4.1.1966.12.1.48.4.4 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Specify the phone number provided by your service provider to access their wireless network. Probably similar to *99***1# | ||||
| SusbInitString | 1.3.6.1.4.1.1966.12.1.48.4.5 | DisplayString (SIZE (0..60)) | RW | |
scalar · DisplayString (SIZE (0..60)) · read-write · current Specify the initialization string required by your Internet service provider for your USB device. | ||||
| SusbPin | 1.3.6.1.4.1.1966.12.1.48.4.6 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current Specify the PIN required for your USB device. | ||||
| NvmodemPhoneInfo | 1.3.6.1.4.1.1966.12.1.49 | |||
| TvmodemPhoneInfoTable | 1.3.6.1.4.1.1966.12.1.49.1 | NA | ||
table · not-accessible · current The vmodem phone info table. | ||||
| RvmodemPhoneInfoEntry | 1.3.6.1.4.1.1966.12.1.49.1.1 | NA | ||
row · not-accessible · current An entry in the vmodemPhoneInfoTable, each relating to a host.
| ||||
| CvmodemPhoneIndex | 1.3.6.1.4.1.1966.12.1.49.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this vmodem phone table | ||||
| CvmodemPhoneStatus | 1.3.6.1.4.1.1966.12.1.49.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CvmodemPhone | 1.3.6.1.4.1.1966.12.1.49.1.1.3 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current The modem name used for this modem entry. If blank, this entry is currently unused. | ||||
| CvmodemPhoneIP | 1.3.6.1.4.1.1966.12.1.49.1.1.4 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The IP address corresponding to a phone number. If the IP address is blank, then the Host IP address will be used | ||||
| CvmodemPhonePort | 1.3.6.1.4.1.1966.12.1.49.1.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current TCP port number corresponding to a phone number. | ||||
| CvmodemPhoneTunnelName | 1.3.6.1.4.1.1966.12.1.49.1.1.6 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| CvmodemPhoneHostName | 1.3.6.1.4.1.1966.12.1.49.1.1.7 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of a configured host that will correspond to the phone number. | ||||
| NipsecInfo | 1.3.6.1.4.1.1966.12.1.50 | |||
| TipsecTable | 1.3.6.1.4.1.1966.12.1.50.1 | NA | ||
table · not-accessible · current The IPsec table. | ||||
| RipsecEntry | 1.3.6.1.4.1.1966.12.1.50.1.1 | NA | ||
row · not-accessible · current An entry in the ipsecEntry, each relating to a IPsec tunnel.
| ||||
| CipsecIndex | 1.3.6.1.4.1.1966.12.1.50.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this IPsec tunnel. | ||||
| CipsecStatus | 1.3.6.1.4.1.1966.12.1.50.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CipsecName | 1.3.6.1.4.1.1966.12.1.50.1.1.3 | DisplayString (SIZE (0..16)) | RW | |
column · DisplayString (SIZE (0..16)) · read-write · current The IPsec tunnel name. To delete an IPsec, set this field to blank. If blank, this entry is currently unused. | ||||
| CipsecAuthMethod | 1.3.6.1.4.1.1966.12.1.50.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The type of authentication Method that the IPsec tunnel will use
| ||||
| CipsecSecret | 1.3.6.1.4.1.1966.12.1.50.1.1.5 | DisplayString (SIZE (0..16)) | RW | |
column · DisplayString (SIZE (0..16)) · read-write · current The IPsec tunnel secret. This applies to all IPsec and and L2TP/IPsec tunnels | ||||
| CipsecLocalDevice | 1.3.6.1.4.1.1966.12.1.50.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Define local device (the Device Server) either in left or right
| ||||
| CipsecBootaction | 1.3.6.1.4.1.1966.12.1.50.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Select one of the boot action from: start, add or ignore.
| ||||
| CipsecLocalIpAddress | 1.3.6.1.4.1.1966.12.1.50.1.1.8 | DisplayString (SIZE (0..126)) | RW | |
column · DisplayString (SIZE (0..126)) · read-write · current IPv4/IPv6 or FQDN(Fully Qualified Domain Name) | ||||
| CipsecLocalExternalIpAddress | 1.3.6.1.4.1.1966.12.1.50.1.1.9 | DisplayString (SIZE (0..126)) | RW | |
column · DisplayString (SIZE (0..126)) · read-write · current External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T through a router/firewall. Only Available if Nat-T is on. | ||||
| CipsecLocalNextHop | 1.3.6.1.4.1.1966.12.1.50.1.1.10 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured in the IOLAN's->Network->Gateways settings. | ||||
| CipsecLocalHostNetwork | 1.3.6.1.4.1.1966.12.1.50.1.1.11 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection. | ||||
| CipsecLocalNetmaskBit | 1.3.6.1.4.1.1966.12.1.50.1.1.12 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current If the local host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128. | ||||
| CipsecRemoteIpAddress | 1.3.6.1.4.1.1966.12.1.50.1.1.13 | DisplayString (SIZE (0..126)) | RW | |
column · DisplayString (SIZE (0..126)) · read-write · current IPv4/IPv6 or FQDN(Fully Qualified Domain Name) | ||||
| CipsecRemoteExternalIpAddress | 1.3.6.1.4.1.1966.12.1.50.1.1.14 | DisplayString (SIZE (0..126)) | RW | |
column · DisplayString (SIZE (0..126)) · read-write · current External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T throught a router/firewall. Only Available if Nat-T is on. | ||||
| CipsecRemoteNextHop | 1.3.6.1.4.1.1966.12.1.50.1.1.15 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured in the IOLAN's->Network->Gateways settings. | ||||
| CipsecRemoteHostNetwork | 1.3.6.1.4.1.1966.12.1.50.1.1.16 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The host/network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection. | ||||
| CipsecRemoteNetmaskBit | 1.3.6.1.4.1.1966.12.1.50.1.1.17 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current If the remote host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128. | ||||
| CipsecRemoteValCritCountry | 1.3.6.1.4.1.1966.12.1.50.1.1.18 | DisplayString (SIZE (0..2)) | RW | |
column · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| CipsecRemoteValCritStateProv | 1.3.6.1.4.1.1966.12.1.50.1.1.19 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| CipsecRemoteValCritLocality | 1.3.6.1.4.1.1966.12.1.50.1.1.20 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| CipsecRemoteValCritOrganisation | 1.3.6.1.4.1.1966.12.1.50.1.1.21 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| CipsecRemoteValCritOrganisationUnit | 1.3.6.1.4.1.1966.12.1.50.1.1.22 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| CipsecRemoteValCritCommonName | 1.3.6.1.4.1.1966.12.1.50.1.1.23 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| CipsecRemoteValCritEmail | 1.3.6.1.4.1.1966.12.1.50.1.1.24 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| Nipv6Info | 1.3.6.1.4.1.1966.12.1.51 | |||
| Nipv6ServicesInfo | 1.3.6.1.4.1.1966.12.1.51.1 | |||
| Sipv6serviceStatus | 1.3.6.1.4.1.1966.12.1.51.1.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SserviceAutoDiscovery1 | 1.3.6.1.4.1.1966.12.1.51.1.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 1) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will configure the IPv6 address(es) and configuration parameters based on the information contained in the advertisement. If no Router Advertisement message is received, the Device Server will attempt to connect to a DHCPv6 server to obtain IPv6 addresses and other configuration parameters. Default on. | ||||
| SserviceDHCPv61 | 1.3.6.1.4.1.1966.12.1.51.1.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 1) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. | ||||
| SserviceRouterAdvertisement1 | 1.3.6.1.4.1.1966.12.1.51.1.4 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 1) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Advertisement message can be configured to contain any of the following information: o DHCPv6-Use the DHCPv6 server to obtain additional IPv6 address(es) and configuration parameters. o DHCPv6 Configuration Options-Use DHCPv6 server to obtain additional configuration parameters. o Network Prefixes-Advertise the selected custom configured network prefixes. Default is off. | ||||
| SserviceRouterAdvertisementDHCP1 | 1.3.6.1.4.1.1966.12.1.51.1.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 1) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters. Default is off. | ||||
| SserviceRouterAdvertisementOther1 | 1.3.6.1.4.1.1966.12.1.51.1.6 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 1) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. | ||||
| SserviceAutoDiscovery2 | 1.3.6.1.4.1.1966.12.1.51.1.7 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 2) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will configure the IPv6 address(es) and configuration parameters based on the information contained in the advertisement. If no Router Advertisement message is received, the Device Server will attempt to connect to a DHCPv6 server to obtain IPv6 addresses and other configuration parameters. Default on. | ||||
| SserviceDHCPv62 | 1.3.6.1.4.1.1966.12.1.51.1.8 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 2) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. | ||||
| SserviceRouterAdvertisement2 | 1.3.6.1.4.1.1966.12.1.51.1.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 2) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Advertisement message can be configured to contain any of the following information: o DHCPv6-Use the DHCPv6 server to obtain additional IPv6 address(es) and configuration parameters. o DHCPv6 Configuration Options-Use DHCPv6 server to obtain additional configuration parameters. o Network Prefixes-Advertise the selected custom configured network prefixes. Default is off. | ||||
| SserviceRouterAdvertisementDHCP2 | 1.3.6.1.4.1.1966.12.1.51.1.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 2) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters. Default is off. | ||||
| SserviceRouterAdvertisementDHCP3 | 1.3.6.1.4.1.1966.12.1.51.1.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 3) When on, the Router Advertisement message indicates to use the DHCPv6 server for obtaining additional IPv6 addresses and configuration parameters. Default is off. | ||||
| SserviceRouterAdvertisementOther2 | 1.3.6.1.4.1.1966.12.1.51.1.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 2) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. | ||||
| SserviceRouterAdvertisementOther3 | 1.3.6.1.4.1.1966.12.1.51.1.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 3) When on, the Router Advertisement message indicates to use the DHCPv6 server to obtain additional configuration parameters. Default is off. | ||||
| SserviceDHCPv6IPAddresses | 1.3.6.1.4.1.1966.12.1.51.1.12 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When on, the Device Server will accept IPv6 address(es) from the DHCPv6 server. | ||||
| SserviceDHCPv6NetworkPrefix | 1.3.6.1.4.1.1966.12.1.51.1.13 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When on, the Device Server will accept the network prefix from the DHCPv6 server. | ||||
| SserviceAutoDiscovery3 | 1.3.6.1.4.1.1966.12.1.51.1.14 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 3) When on, the Device Server will send out a Router Solicitation message. If a Router Advertisement message is received, the Device Server will configure the IPv6 address(es) and configuration parameters based on the information contained in the advertisement. If no Router Advertisement message is received, the Device Server will attempt to connect to a DHCPv6 server to obtain IPv6 addresses and other configuration parameters. Default on. | ||||
| SserviceDHCPv63 | 1.3.6.1.4.1.1966.12.1.51.1.15 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 3) When on, requests IPv6 address(es) and configuration information from the DHCPv6 server. Default off. | ||||
| SserviceRouterAdvertisement3 | 1.3.6.1.4.1.1966.12.1.51.1.16 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current (Ethernet 3) When on, the Device Server will periodically send IPv6 Router Advertisement messages and respond to Router Solicitation messages. The Router Advertisement message can be configured to contain any of the following information: o DHCPv6-Use the DHCPv6 server to obtain additional IPv6 address(es) and configuration parameters. o DHCPv6 Configuration Options-Use DHCPv6 server to obtain additional configuration parameters. o Network Prefixes-Advertise the selected custom configured network prefixes. Default is off. | ||||
| Tipv6AddressEth1Table | 1.3.6.1.4.1.1966.12.1.51.2 | NA | ||
table · not-accessible · current Ethernet 1 IPv6 custom address table. | ||||
| Ripv6AddressEth1Entry | 1.3.6.1.4.1.1966.12.1.51.2.1 | NA | ||
| Cipv6AddressEth1Index | 1.3.6.1.4.1.1966.12.1.51.2.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Ethernet 1 custom IPv6 address index. | ||||
| Cipv6AddressEth1Status | 1.3.6.1.4.1.1966.12.1.51.2.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Cipv6AddressEth1Addr | 1.3.6.1.4.1.1966.12.1.51.2.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current (Ethernet 1) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address (must turn ipv6AddressAuto1 on) or enter a specific IPv6 address. | ||||
| Cipv6AddressEth1PrefixBits | 1.3.6.1.4.1.1966.12.1.51.2.1.4 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current (Ethernet 1) The IPv6 prefix bits of either the network or IPv6 address. | ||||
| Cipv6AddressEth1Auto | 1.3.6.1.4.1.1966.12.1.51.2.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 1) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. | ||||
| Cipv6AddressEth1SendAdvertise | 1.3.6.1.4.1.1966.12.1.51.2.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 1) When on, the Device Server will include the IPv6 address in router advertisements. | ||||
| Tipv6AddressEth2Table | 1.3.6.1.4.1.1966.12.1.51.3 | NA | ||
table · not-accessible · current Ethernet 2 IPv6 custom address table. | ||||
| Ripv6AddressEth2Entry | 1.3.6.1.4.1.1966.12.1.51.3.1 | NA | ||
| Cipv6AddressEth2Index | 1.3.6.1.4.1.1966.12.1.51.3.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Ethernet 2 custom IPv6 address index. | ||||
| Cipv6AddressEth2Status | 1.3.6.1.4.1.1966.12.1.51.3.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Cipv6AddressEth2Addr defined twice | 1.3.6.1.4.1.1966.12.1.51.3.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current (Ethernet 2) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address or enter a specific IPv6 address. | ||||
| Cipv6AddressEth2PrefixBits | 1.3.6.1.4.1.1966.12.1.51.3.1.4 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current (Ethernet 2) The IPv6 prefix bits of either the network or IPv6 address. | ||||
| Cipv6AddressEth2Auto | 1.3.6.1.4.1.1966.12.1.51.3.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 2) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. | ||||
| Cipv6AddressEth2SendAdvertise | 1.3.6.1.4.1.1966.12.1.51.3.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 2) When on, the Device Server will include the IPv6 address in router advertisements. | ||||
| Tipv6AddressEth3Table | 1.3.6.1.4.1.1966.12.1.51.4 | NA | ||
table · not-accessible · current Ethernet 3 IPv6 custom address table. | ||||
| Ripv6AddressEth3Entry | 1.3.6.1.4.1.1966.12.1.51.4.1 | NA | ||
| Cipv6AddressEth3Index | 1.3.6.1.4.1.1966.12.1.51.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current Ethernet 3 custom IPv6 address index. | ||||
| Cipv6TunnelIndex | 1.3.6.1.4.1.1966.12.1.51.4.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The IPv6 tunnel index entry. | ||||
| Cipv6AddressEth3Status | 1.3.6.1.4.1.1966.12.1.51.4.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Cipv6TunnelStatus | 1.3.6.1.4.1.1966.12.1.51.4.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Sipv6AddressEth2Addr defined twice | 1.3.6.1.4.1.1966.12.1.51.4.1.3 | Ipv4v6Address | RW | |
scalar · Ipv4v6Address · read-write · current (Ethernet 2) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address or enter a specific IPv6 address. | ||||
| Cipv6TunnelName | 1.3.6.1.4.1.1966.12.1.51.4.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current The name of the IPv6 tunnel. Maximum 16 alphanumeric characters. | ||||
| Cipv6AddressEth3PrefixBits | 1.3.6.1.4.1.1966.12.1.51.4.1.4 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current (Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address. | ||||
| Cipv6TunnelMode | 1.3.6.1.4.1.1966.12.1.51.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the Device Server will manually create the IPv6 tunnel to the specified Remote Host through the specified Interface. o ip6to4-When specified, the IOLAN will broadcast to the multicast address 192.88.99.1 through the specified Interface. When the closest ip6to4 router responds, it will create the IPv6 tunnel, encapsulating and decapsulating IPv6 traffic sent to and from the Device Server. o Teredo-When specified, the Teredo protocol encapsulates the IPv6 packet as an IPv4 UDP message, allowing it to pass through most network address translator (NAT) boxes and create an IPv6 tunnel to the specified Remote Host (a Teredo server) through the specified Interface. Default is Manual.
| ||||
| Cipv6AddressEth3Auto | 1.3.6.1.4.1.1966.12.1.51.4.1.5 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 3) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address. | ||||
| Cipv6TunnelRemoteHost | 1.3.6.1.4.1.1966.12.1.51.4.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current The IPv4 host that can access the IPv6 network when the Mode is Manual. The Teredo server when the Mode is Teredo. | ||||
| Cipv6AddressEth3SendAdvertise | 1.3.6.1.4.1.1966.12.1.51.4.1.6 | OnOffValue | RW | |
column · OnOffValue · read-write · current (Ethernet 3) When on, the Device Server will include the IPv6 address in router advertisements. | ||||
| Cipv6TunnelGateway | 1.3.6.1.4.1.1966.12.1.51.4.1.6 | DisplayString (SIZE (0..20)) | RW | |
column · DisplayString (SIZE (0..20)) · read-write · current The interface that the Device Server is going to use to access the Remote Host. The list is comprised of the Ethernet interface(s), the line names configured for the PPP or SLIP, or the default line names configured for PPP or SLIP using serial_port_x (where x=line number). Default is ethernet_1. | ||||
| Ripv6TunnelEntry | 1.3.6.1.4.1.1966.12.1.51.4.1 | NA | ||
| Tipv6TunnelTable | 1.3.6.1.4.1.1966.12.1.51.4 | NA | ||
table · not-accessible · current IPv6 tunnel table. | ||||
| Nl2tpInfo | 1.3.6.1.4.1.1966.12.1.52 | |||
| Sl2tpStatus | 1.3.6.1.4.1.1966.12.1.52.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| Sl2tpIpsec | 1.3.6.1.4.1.1966.12.1.52.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current When on, listens for L2TP/IPsec VPN tunnel connections. Note: to allow non-VPN tunnel connections to the Device Server, you must create entries in the VPN Exceptions list. | ||||
| Sl2tpAuthMethod | 1.3.6.1.4.1.1966.12.1.52.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The type of authentication Method that the L2TP IPsec tunnel will use.
| ||||
| Sl2tpSecret | 1.3.6.1.4.1.1966.12.1.52.4 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The L2TP/IPsec and IPsec tunnel secret. This applies to all Shared Secret VPN tunnels. | ||||
| Sl2tpIpsecLocalIpAddr | 1.3.6.1.4.1.1966.12.1.52.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IPv4 address that the Device Server will listen on for L2TP/IPsec connections. If the default value (0.0.0.0) is kept, the Device Server will use the Default Gateway value (if no Default Gateway is specified, L2TP/IPsec VPN connections will error out). | ||||
| Sl2tpCountry | 1.3.6.1.4.1.1966.12.1.52.6 | DisplayString (SIZE (0..2)) | RW | |
scalar · DisplayString (SIZE (0..2)) · read-write · current A two character country code; for example, US. | ||||
| Sl2tpStateProv | 1.3.6.1.4.1.1966.12.1.52.7 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the state/province; for example, IL. | ||||
| Sl2tpLocality | 1.3.6.1.4.1.1966.12.1.52.8 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 128 character entry for the location; for example, a city. | ||||
| Sl2tpOrganisation | 1.3.6.1.4.1.1966.12.1.52.9 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the organization; for example, Accounting. | ||||
| Sl2tpOrganisationUnit | 1.3.6.1.4.1.1966.12.1.52.10 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for the unit in the organization; for example, Payroll. | ||||
| Sl2tpCommonName | 1.3.6.1.4.1.1966.12.1.52.11 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Up to a 64 character entry for common name; for example, the host name or fully qualified domain name. | ||||
| Sl2tpEmail | 1.3.6.1.4.1.1966.12.1.52.12 | DisplayString (SIZE (0..128)) | RW | |
scalar · DisplayString (SIZE (0..128)) · read-write · current Up to a 64 character entry for an email address; for example, [email protected]. | ||||
| Sl2tpPPPLocalIpAddr | 1.3.6.1.4.1.1966.12.1.52.13 | IpAddress | RW | |
scalar · IpAddress · read-write · current Specify the unique IPv4 address that hosts accessing the Device Server through the L2TP tunnel will use. | ||||
| Sl2tpPPPRemoteStartIpAddr | 1.3.6.1.4.1.1966.12.1.52.14 | IpAddress | RW | |
scalar · IpAddress · read-write · current Specify the first IPv4 address that can be assigned to incoming hosts through the L2TP tunnel. | ||||
| Sl2tpPPPRemoteEndIpAddr | 1.3.6.1.4.1.1966.12.1.52.15 | IpAddress | RW | |
scalar · IpAddress · read-write · current Specify the end range of the IPv4 addresses that can be assigned to incoming hosts through the L2TP tunnel. | ||||
| Sl2tpPap | 1.3.6.1.4.1.1966.12.1.52.16 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Use the PAP authentication method that will be used for the L2TP tunnel. | ||||
| Sl2tpChap | 1.3.6.1.4.1.1966.12.1.52.17 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Use the CHAP authentication method that will be used for the L2TP tunnel. This is the default. | ||||
| NvpnexceptionInfo | 1.3.6.1.4.1.1966.12.1.53 | |||
| TvpnexceptionTable | 1.3.6.1.4.1.1966.12.1.53.1 | NA | ||
table · not-accessible · current vpnexceptionTable | ||||
| RvpnexceptionEntry | 1.3.6.1.4.1.1966.12.1.53.1.1 | NA | ||
| CvpnexceptionIndex | 1.3.6.1.4.1.1966.12.1.53.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current vpnexceptionIndex | ||||
| CvpnexceptionStatus | 1.3.6.1.4.1.1966.12.1.53.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CvpnexceptionIpAddress | 1.3.6.1.4.1.1966.12.1.53.1.1.3 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current The IPv4 or IPv6 address of the host or network that will communicate with the Device Server outside of the VPN tunnel. | ||||
| CvpnexceptionPrefixBits | 1.3.6.1.4.1.1966.12.1.53.1.1.4 | Integer32 (0..128) | RW | |
column · Integer32 (0..128) · read-write · current The IPv4 subnet bits or IPv6 prefix bits for the network. 0-128. | ||||
| NhttpTunInfo | 1.3.6.1.4.1.1966.12.1.54 | |||
| NhttpTunCfg | 1.3.6.1.4.1.1966.12.1.54.1 | |||
| NhttpTunTunnelCfg | 1.3.6.1.4.1.1966.12.1.54.1.1 | |||
| ThttpTunTunnelCfgTable | 1.3.6.1.4.1.1966.12.1.54.1.1.1 | NA | ||
table · not-accessible · current The httpTunTunnelCfg table. | ||||
| RhttpTunTunnelCfgEntry | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1 | NA | ||
row · not-accessible · current An entry in the httpTunTunnelCfgEntry, each relating to a tunnel. | ||||
| ChttpTunTunnelCfgIndex | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this tunnel. | ||||
| ChttpTunTunnelCfgStatus | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ChttpTunTunnelCfgValid | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether this tunnel is valid or not. | ||||
| ChttpTunTunnelCfgName | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of this tunnel. Tunnel names should be unique. | ||||
| ChttpTunTunnelCfgMode | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies whether this tunnel endpoint should listen or connect. A functional HTTP tunnel consists of two endpoints: a listener and a connecter.
| ||||
| ChttpTunTunnelCfgConnectHost | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.6 | DisplayString (SIZE (0..50)) | RW | |
column · DisplayString (SIZE (0..50)) · read-write · current For tunnels in connect mode, specifies the remote host to connect to. | ||||
| ChttpTunTunnelCfgConnectUseProxy | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.7 | OnOffValue | RW | |
column · OnOffValue · read-write · current For tunnels in connect mode, specifies whether to use an HTTP proxy. | ||||
| ChttpTunTunnelCfgListenRestrictIp | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.8 | Ipv4v6Address | RW | |
column · Ipv4v6Address · read-write · current For tunnels in listen mode, specifies whether to restrict the other tunnel endpoint to a fixed IP address. Use 0.0.0.0 for no restriction | ||||
| ChttpTunTunnelCfgHttps | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.9 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether this tunnel should use HTTPS for communication. | ||||
| ChttpTunTunnelCfgRestrictAccess | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether this tunnel should restrict access to local connections. | ||||
| ChttpTunTunnelCfgSecret | 1.3.6.1.4.1.1966.12.1.54.1.1.1.1.11 | DisplayString (SIZE (0..50)) | RW | |
column · DisplayString (SIZE (0..50)) · read-write · current Specifies the shared secret for this tunnel. If the shared secret blank, the tunnel will be unauthenticated. | ||||
| NhttpTunProxyCfg | 1.3.6.1.4.1.1966.12.1.54.1.1.2 | |||
| NhttpTunProxyBasic | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1 | |||
| ShttpTunProxyBasicStatus | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ShttpTunProxyHost | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.2 | DisplayString (SIZE (0..50)) | RW | |
scalar · DisplayString (SIZE (0..50)) · read-write · current The hostname/IP address of the HTTP proxy. | ||||
| ShttpTunProxyPort | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.3 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The port number for connecting to the HTTP proxy. | ||||
| ShttpTunProxyUser | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.4 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current The username for the HTTP proxy, if authentication is required. | ||||
| ShttpTunProxyPassword | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.5 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current The password for the HTTP proxy, if authentication is required. | ||||
| ShttpTunProxyDomain | 1.3.6.1.4.1.1966.12.1.54.1.1.2.1.6 | DisplayString (SIZE (0..80)) | RW | |
scalar · DisplayString (SIZE (0..80)) · read-write · current The NTLM domain for the HTTP proxy. This is only required if the proxy is using NTLM authentication. | ||||
| NhttpTunProxyAdv | 1.3.6.1.4.1.1966.12.1.54.1.1.2.2 | |||
| ShttpTunProxyAdvStatus | 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ShttpTunProxyKeepaliveInterval | 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.2 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Keepalive interval for HTTP tunneling, in seconds | ||||
| ShttpTunProxyMaxConnectionAge | 1.3.6.1.4.1.1966.12.1.54.1.1.2.2.3 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Maximum connection age for HTTP tunneling, in minutes. | ||||
| NhttpTunConnectionCfg | 1.3.6.1.4.1.1966.12.1.54.1.2 | |||
| ThttpTunConnectionCfgTable | 1.3.6.1.4.1.1966.12.1.54.1.2.1 | NA | ||
table · not-accessible · current The httpTunConnectionCfg table. | ||||
| RhttpTunConnectionCfgEntry | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the httpTunConnectionCfgEntry, each relating to a Connection. | ||||
| ChttpTunConnectionCfgIndex | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this Connection. | ||||
| ChttpTunConnectionCfgStatus | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| ChttpTunConnectionCfgValid | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.3 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether this Connection is valid or not. | ||||
| ChttpTunConnectionCfgTunnelName | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.4 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current The name of the tunnel associated with this connection. | ||||
| ChttpTunConnectionCfgProtocol | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The protocol used by this connection.
| ||||
| ChttpTunConnectionCfgDestinationHost | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.6 | DisplayString (SIZE (0..50)) | RW | |
column · DisplayString (SIZE (0..50)) · read-write · current The destination host for this connection. Application traffic tunneled in this connection will be forwarded to this host. | ||||
| ChttpTunConnectionCfgDestinationPort | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.7 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The destination port for this connection. Application traffic tunneled in this connection will be forwarded to this TCP/UDP port. | ||||
| ChttpTunConnectionCfgLocalPort | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.8 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The local listening port for this connection. Application that wish to use this tunnel/connection should connect to this TCP/UDP port on the device server. | ||||
| ChttpTunConnectionCfgLocalIpAlias | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.9 | IpAddress | RW | |
column · IpAddress · read-write · current (Optional) Specifies the local IP alias for this connection. If specified, application who wish to use this tunnel/connection can connect to the local IP alias and TCP/UDP port. This is useful when you want to create several connections with the same local listening TCP/UDP port. Use 0.0.0.0 to specify no IP alias. | ||||
| ChttpTunConnectionCfgRestrictAccess | 1.3.6.1.4.1.1966.12.1.54.1.2.1.1.10 | OnOffValue | RW | |
column · OnOffValue · read-write · current Specifies whether to restrict access to local application traffic only. | ||||
| NhttpTunStats | 1.3.6.1.4.1.1966.12.1.54.2 | |||
| NhttpTunTunnelStats | 1.3.6.1.4.1.1966.12.1.54.2.1 | |||
| ThttpTunTunnelStatsTable | 1.3.6.1.4.1.1966.12.1.54.2.1.1 | NA | ||
table · not-accessible · current The httpTunTunnelStats table. | ||||
| RhttpTunTunnelStatsEntry | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1 | NA | ||
row · not-accessible · current An entry in the httpTunTunnelStatsEntry, each relating to a tunnel. | ||||
| ChttpTunTunnelStatsIndex | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this tunnel. | ||||
| ChttpTunTunnelStatsName | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.2 | DisplayString (SIZE (0..14)) | RO | |
column · DisplayString (SIZE (0..14)) · read-only · current The name of this tunnel. | ||||
| ChttpTunTunnelStatsMode | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies whether this tunnel endpoint is listening or connecting.
| ||||
| ChttpTunTunnelStatsConnectHost | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.4 | DisplayString (SIZE (0..50)) | RO | |
column · DisplayString (SIZE (0..50)) · read-only · current For tunnels in connect mode, specifies the remote host to connect to. | ||||
| ChttpTunTunnelStatsConnected | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.5 | YesNoValue | RO | |
column · YesNoValue · read-only · current Specifies whether this tunnel is connected. | ||||
| ChttpTunTunnelStatsHttps | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.6 | YesNoValue | RO | |
column · YesNoValue · read-only · current Specifies whether this tunnel is using HTTPS for communication. | ||||
| ChttpTunTunnelStatsAuthFailed | 1.3.6.1.4.1.1966.12.1.54.2.1.1.1.7 | YesNoValue | RO | |
column · YesNoValue · read-only · current Specifies whether authentication failed for this tunnel. | ||||
| NhttpTunConnectionStats | 1.3.6.1.4.1.1966.12.1.54.2.2 | |||
| ThttpTunConnectionStatsTable | 1.3.6.1.4.1.1966.12.1.54.2.2.1 | NA | ||
table · not-accessible · current The httpTunConnectionStats table. | ||||
| RhttpTunConnectionStatsEntry | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1 | NA | ||
row · not-accessible · current An entry in the httpTunConnectionStatsEntry, each relating to a Connection. | ||||
| ChttpTunConnectionStatsIndex | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this connection. | ||||
| ChttpTunConnectionStatsTunnelName | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.2 | DisplayString (SIZE (0..14)) | RO | |
column · DisplayString (SIZE (0..14)) · read-only · current The name of the tunnel associated with this connection. | ||||
| ChttpTunConnectionStatsType | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of connection: direct - Originating from this end of tunnel reverse - Originating from other end of tunnel
| ||||
| ChttpTunConnectionStatsProtocol | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The protocol used by this connection.
| ||||
| ChttpTunConnectionStatsDestinationIp | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.5 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The destination IP for this connection. | ||||
| ChttpTunConnectionStatsDestinationPort | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.6 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port for this connection. | ||||
| ChttpTunConnectionStatsSourceIp | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.7 | Ipv4v6Address | RO | |
column · Ipv4v6Address · read-only · current The source (originating) IP for this connection. | ||||
| ChttpTunConnectionStatsLocalPort | 1.3.6.1.4.1.1966.12.1.54.2.2.1.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The local listening port for this connection. | ||||
| NsftpInfo | 1.3.6.1.4.1.1966.12.1.55 | |||
| SsftpStatus | 1.3.6.1.4.1.1966.12.1.55.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SsftpCompression | 1.3.6.1.4.1.1966.12.1.55.2 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks | ||||
| SsftpAutoLogin | 1.3.6.1.4.1.1966.12.1.55.3 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Creates an automatic SFTP authentication, using the Name and Password values. | ||||
| SsftpName | 1.3.6.1.4.1.1966.12.1.55.4 | DisplayString (SIZE (0..20)) | RW | |
scalar · DisplayString (SIZE (0..20)) · read-write · current The name of the user on the SFTP server. | ||||
| SsftpPassword | 1.3.6.1.4.1.1966.12.1.55.5 | DisplayString (SIZE (0..20)) | RW | |
scalar · DisplayString (SIZE (0..20)) · read-write · current The user's password on the SFTP server. | ||||
| SsftpHost | 1.3.6.1.4.1.1966.12.1.55.6 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name of the SFTP host. | ||||
| SsftpTunnelName | 1.3.6.1.4.1.1966.12.1.55.7 | DisplayString (SIZE (0..14)) | RW | |
scalar · DisplayString (SIZE (0..14)) · read-write · current The name of the HTTP tunnel associated with this service. | ||||
| SsftpProtocol | 1.3.6.1.4.1.1966.12.1.55.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify the SSH client version that will be used with the SFTP server.
| ||||
| SsftpRSA | 1.3.6.1.4.1.1966.12.1.55.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current An authentication method used by SSH version 1 and 2. Use RSA authentication for the SFTP server. | ||||
| SsftpDSA | 1.3.6.1.4.1.1966.12.1.55.10 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current An authentication method used by SSH version 2. Use DSA authentication for the SFTP server. | ||||
| SsftpKeyboard | 1.3.6.1.4.1.1966.12.1.55.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current The user types in a password for authentication. | ||||
| SsftpCipherSSH1 | 1.3.6.1.4.1.1966.12.1.55.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish
| ||||
| SsftpFirstSSH2Cipher | 1.3.6.1.4.1.1966.12.1.55.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES, CAST, or Arcfour
| ||||
| SsftpSecondSSH2Cipher | 1.3.6.1.4.1.1966.12.1.55.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES, CAST, or Arcfour
| ||||
| SsftpThirdSSH2Cipher | 1.3.6.1.4.1.1966.12.1.55.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES, CAST, or Arcfour
| ||||
| SsftpFourthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.55.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES, CAST, or Arcfour
| ||||
| SsftpFifthSSH2Cipher | 1.3.6.1.4.1.1966.12.1.55.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES, CAST, or Arcfour
| ||||
| NwlanInfo | 1.3.6.1.4.1.1966.12.1.56 | |||
| NwlanCfg | 1.3.6.1.4.1.1966.12.1.56.1 | |||
| NwlanGlobalCfg | 1.3.6.1.4.1.1966.12.1.56.1.1 | |||
| SwlanGlobalStatus | 1.3.6.1.4.1.1966.12.1.56.1.1.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SwlanGlobalRegion | 1.3.6.1.4.1.1966.12.1.56.1.1.2 | DisplayString (SIZE (2..9)) | RW | |
scalar · DisplayString (SIZE (2..9)) · read-write · current The name of the region where the WIFI is being used. Valid regions are: US-Canada, EU, or Japan | ||||
| SwlanGlobalMode | 1.3.6.1.4.1.1966.12.1.56.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Wi-Fi operating mode.
disabled: Wi-Fi is disabled
client: In this mode, the IOLAN can connect to an access point.
softap: In this mode, the IOLAN acts as an access point allowing
wireless clients to connect
| ||||
| SwlanGlobalRadioBand | 1.3.6.1.4.1.1966.12.1.56.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The radio bands to use. bandBoth: use both 2.4GHz and 5GHz bands band2g4: use 2.4GHz band only band5g: use 5GHz band only
| ||||
| SwlanGlobalWps | 1.3.6.1.4.1.1966.12.1.56.1.1.5 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable WPS. | ||||
| SwlanGlobalPassiveScan | 1.3.6.1.4.1.1966.12.1.56.1.1.6 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable passive scan only. | ||||
| SwlanGlobalRoaming | 1.3.6.1.4.1.1966.12.1.56.1.1.7 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable roaming. | ||||
| SwlanGlobalRoamingDecision | 1.3.6.1.4.1.1966.12.1.56.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current This controls how the IOLAN scans for a better access point within the same ESSID network.
| ||||
| SwlanGlobalRoamingOutOfRangeScanInterval | 1.3.6.1.4.1.1966.12.1.56.1.1.9 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The time in seconds, between fast roaming scans. | ||||
| SwlanGlobalRoamingInRangeScanInterval | 1.3.6.1.4.1.1966.12.1.56.1.1.10 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The time in seconds, between slow roaming scans. | ||||
| SwlanGlobalAntennaDiveristyMrc | 1.3.6.1.4.1.1966.12.1.56.1.1.11 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable antenna diversity/MRC. | ||||
| NwlanProfilesCfg | 1.3.6.1.4.1.1966.12.1.56.1.2 | |||
| TwlanProfileTable | 1.3.6.1.4.1.1966.12.1.56.1.2.1 | NA | ||
table · not-accessible · current The WLAN profile table. | ||||
| RwlanProfileEntry | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the wlanProfileEntry, each relating to a WLAN profile.
| ||||
| CwlanProfileIndex | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The table entry number for this user. | ||||
| CwlanProfileStatus | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.2 | ContainerStatus | RW | |
column · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| CwlanProfileEnable | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.3 | YesNoValue | RW | |
column · YesNoValue · read-write · current Only enabled profiles are considered for association with access points. | ||||
| CwlanProfileConnectPriority | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.4 | Integer32 (1..8) | RW | |
column · Integer32 (1..8) · read-write · current The connect priority which the IOLAN uses when attempting to connect to an access point. | ||||
| CwlanProfileName | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.5 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The name for this profile. To delete the profile, set this field to blank. If blank, this entry is currently unused. | ||||
| CwlanProfileSsid | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.6 | DisplayString (SIZE (1..32)) | RW | |
column · DisplayString (SIZE (1..32)) · read-write · current The SSID for this profile. | ||||
| CwlanProfileScanBand | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This profile is considered only if the access point is using the selected band. bandBoth: either 2.4GHz or 5GHz bands band2g4: 2.4GHz band band5g: 5GHz band
| ||||
| CwlanProfileScanDfs | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.8 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable scanning of DFS channels. | ||||
| CwlanProfileHiddenSsid | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.9 | YesNoValue | RW | |
column · YesNoValue · read-write · current Specify whether the access point hides (Yes) or broadcasts (No) the SSID. | ||||
| CwlanProfileSecurityType | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The security type to use.
| ||||
| CwlanProfileEncryptionType | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The encryption type to use.
| ||||
| CwlanProfileOpenSharedWepKey1 | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.12 | DisplayString (SIZE (5..26)) | RW | |
column · DisplayString (SIZE (5..26)) · read-write · current WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters. | ||||
| CwlanProfileOpenSharedWepKey2 | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.13 | DisplayString (SIZE (5..26)) | RW | |
column · DisplayString (SIZE (5..26)) · read-write · current WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters. | ||||
| CwlanProfileOpenSharedWepKey3 | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.14 | DisplayString (SIZE (5..26)) | RW | |
column · DisplayString (SIZE (5..26)) · read-write · current WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters. | ||||
| CwlanProfileOpenSharedWepKey4 | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.15 | DisplayString (SIZE (5..26)) | RW | |
column · DisplayString (SIZE (5..26)) · read-write · current WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters. | ||||
| CwlanProfileOpenSharedWepTxKeyIndex | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.16 | Integer32 (1..4) | RW | |
column · Integer32 (1..4) · read-write · current The index of the WEP key to use for encrypting transmitted data. | ||||
| CwlanProfilePersonalSecurityKey | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.17 | DisplayString (SIZE (8..64)) | RW | |
column · DisplayString (SIZE (8..64)) · read-write · current Passphrase/key to use for encrypting the data. 8-63 case sensitive characters or 64 hexadecimal characters. | ||||
| CwlanProfileEnterpriseUsername | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.18 | DisplayString (SIZE (0..254)) | RW | |
column · DisplayString (SIZE (0..254)) · read-write · current The username to use for authentication. | ||||
| CwlanProfileEnterprisePassword | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.19 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current The password to use for authentication. | ||||
| CwlanProfileEnterpriseValidateCert | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.20 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable validation of the server certificate. | ||||
| CwlanProfileEnterpriseAuthMethod | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication method.
| ||||
| CwlanProfileEnterpriseAuthProtocol | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication protocol.
| ||||
| CwlanProfileEnterpriseRoamingIdentity | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.23 | DisplayString (SIZE (0..63)) | RW | |
column · DisplayString (SIZE (0..63)) · read-write · current Roaming identity. | ||||
| CwlanProfile8021xUsername | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.24 | DisplayString (SIZE (0..254)) | RW | |
column · DisplayString (SIZE (0..254)) · read-write · current The username to use for authentication. | ||||
| CwlanProfile8021xPassword | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.25 | DisplayString (SIZE (0..128)) | RW | |
column · DisplayString (SIZE (0..128)) · read-write · current The password to use for authentication. | ||||
| CwlanProfile8021xValidateCert | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.26 | OnOffValue | RW | |
column · OnOffValue · read-write · current Enable/disable validation of the server certificate. | ||||
| CwlanProfile8021xAuthMethod | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication method.
| ||||
| CwlanProfile8021xAuthProtocol | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current Authentication protocol.
| ||||
| CwlanProfile8021xRoamingIdentity | 1.3.6.1.4.1.1966.12.1.56.1.2.1.1.29 | DisplayString (SIZE (0..63)) | RW | |
column · DisplayString (SIZE (0..63)) · read-write · current Roaming identity. | ||||
| NwlanSoftapCfg | 1.3.6.1.4.1.1966.12.1.56.1.3 | |||
| SwlanSoftapStatus | 1.3.6.1.4.1.1966.12.1.56.1.3.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SwlanSoftapSSID | 1.3.6.1.4.1.1966.12.1.56.1.3.2 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current The IOLAN's SSID. | ||||
| SwlanSoftapChannel | 1.3.6.1.4.1.1966.12.1.56.1.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The channel to use for softap mode. 2.5GHz: 1-11 5GHz: 36, 40, 44, 48
| ||||
| SwlanSoftapSecurityType | 1.3.6.1.4.1.1966.12.1.56.1.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The security type to use.
| ||||
| SwlanSoftapEncryptionType | 1.3.6.1.4.1.1966.12.1.56.1.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The encryption type to use.
| ||||
| SwlanSoftapSecurityKey | 1.3.6.1.4.1.1966.12.1.56.1.3.6 | DisplayString (SIZE (8..64)) | RW | |
scalar · DisplayString (SIZE (8..64)) · read-write · current The security key for WPA2-Personal/WPA-Personal. 8-63 case sensitive characters or 64 hexadecimal characters | ||||
| SwlanSoftapIpAddress | 1.3.6.1.4.1.1966.12.1.56.1.3.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the IOLAN's WLAN interface when in softap mode. | ||||
| SwlanSoftapSubnetBits | 1.3.6.1.4.1.1966.12.1.56.1.3.8 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 1-32. | ||||
| SwlanSoftapDhcp | 1.3.6.1.4.1.1966.12.1.56.1.3.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current Enable/disable DHCP for softap mode. When enabled, DHCP will assign an IP address to connecting devices. | ||||
| SwlanSoftapDhcpIpPoolAddress | 1.3.6.1.4.1.1966.12.1.56.1.3.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The DHCP pool starting IP address. | ||||
| SwlanSoftapDhcpSubnetBits | 1.3.6.1.4.1.1966.12.1.56.1.3.11 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. Valid values are 1-32. | ||||
| NwlanStats | 1.3.6.1.4.1.1966.12.1.56.2 | |||
| SwlanStatsMode | 1.3.6.1.4.1.1966.12.1.56.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The WLAN operating mode.
| ||||
| SwlanStatsConnected | 1.3.6.1.4.1.1966.12.1.56.2.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Connected status varies depending on operating mode. Mode Disabled: No Client: Yes/No Soft-AP: # of connected clients | ||||
| SwlanStatsProfile | 1.3.6.1.4.1.1966.12.1.56.2.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current In client mode, the WLAN profile corresponding to the currently connected access point. | ||||
| SwlanStatsSsid | 1.3.6.1.4.1.1966.12.1.56.2.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current In Client mode, this is the SSID of the currently connected access point. In Soft-AP mode, this is the SSID of the IOLAN. | ||||
| SwlanStatsBssid | 1.3.6.1.4.1.1966.12.1.56.2.5 | MacAddress | RO | |
scalar · MacAddress · read-only · current In Client mode, this is the BSSID of the currently connected access point. In Soft-AP mode, this is the BSSID of the last connected client. | ||||
| SwlanStatsChannel | 1.3.6.1.4.1.1966.12.1.56.2.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The channel currently being used in Client and Soft-AP mode. | ||||
| SwlanStatsRssi | 1.3.6.1.4.1.1966.12.1.56.2.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The power level of the received signal in dBm. | ||||
| SwlanStatsIpAddress | 1.3.6.1.4.1.1966.12.1.56.2.8 | IpAddress | RO | |
scalar · IpAddress · read-only · current The current IP address of the IOLAN's WLAN interface. | ||||
| SwlanStatsTxRate | 1.3.6.1.4.1.1966.12.1.56.2.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current transmit rate. | ||||
| SwlanStatsRegion | 1.3.6.1.4.1.1966.12.1.56.2.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current The currently configured operating region. | ||||
| SwlanStatsSecurityType | 1.3.6.1.4.1.1966.12.1.56.2.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The security type used in the current connection. | ||||
| SwlanStatsEncryptionType | 1.3.6.1.4.1.1966.12.1.56.2.12 | DisplayString | RO | |
scalar · DisplayString · read-only · current The encryption used in the current connection. | ||||
| SwlanStatsPairwiseCipher | 1.3.6.1.4.1.1966.12.1.56.2.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current The pairwise cipher used in the current connection. | ||||
| SwlanStatsGroupCipher | 1.3.6.1.4.1.1966.12.1.56.2.14 | DisplayString | RO | |
scalar · DisplayString · read-only · current The group cipher used in the current connection. | ||||
| NwwanInfo | 1.3.6.1.4.1.1966.12.1.57 | |||
| NwwanCfg | 1.3.6.1.4.1.1966.12.1.57.1 | |||
| SwwanGlobalStatus | 1.3.6.1.4.1.1966.12.1.57.1.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SwwanEnable | 1.3.6.1.4.1.1966.12.1.57.1.2 | YesNoValue | RW | |
scalar · YesNoValue · read-write · current Enable/disable WWAN | ||||
| SwwanApn | 1.3.6.1.4.1.1966.12.1.57.1.3 | DisplayString (SIZE (1..100)) | RW | |
scalar · DisplayString (SIZE (1..100)) · read-write · current The APN required by your service provider to access the network. | ||||
| SwwanAuthentication | 1.3.6.1.4.1.1966.12.1.57.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The authentication method required by your service provider.
| ||||
| SwwanUsername | 1.3.6.1.4.1.1966.12.1.57.1.5 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The username required by your service provider if the authentication method is PAP or CHAP. | ||||
| SwwanPassword | 1.3.6.1.4.1.1966.12.1.57.1.6 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The password required by your service provider if the authentication method is PAP or CHAP. | ||||
| SwwanPin | 1.3.6.1.4.1.1966.12.1.57.1.7 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The PIN required to unlock a PIN protected SIM. | ||||
| SwwanRadioAccessTechnology | 1.3.6.1.4.1.1966.12.1.57.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The radio access technology of the network to connect to.
| ||||
| SwwanAutoDns | 1.3.6.1.4.1.1966.12.1.57.1.9 | OnOffValue | RW | |
scalar · OnOffValue · read-write · current If enabled, the DNS server IP address will be retrieved automatically from the network. | ||||
| NwwanStats | 1.3.6.1.4.1.1966.12.1.57.2 | |||
| SwwanStatsModemModel | 1.3.6.1.4.1.1966.12.1.57.2.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The modem model. | ||||
| SwwanStatsModemFirmwareVersion | 1.3.6.1.4.1.1966.12.1.57.2.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current The modem firmware version. | ||||
| SwwanStatsIMEI | 1.3.6.1.4.1.1966.12.1.57.2.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The identifier of the modem. | ||||
| SwwanStatsICCID | 1.3.6.1.4.1.1966.12.1.57.2.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The identifier of the actual SIM card itself. | ||||
| SwwanStatsIMSI | 1.3.6.1.4.1.1966.12.1.57.2.5 | DisplayString | RO | |
scalar · DisplayString · read-only · current A unique identifier that defines a subscriber in the wireless world, including the country and mobile network to which the subscriber belongs. | ||||
| SwwanStatsPinRetryCounter | 1.3.6.1.4.1.1966.12.1.57.2.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of retries remaining for the SIM PIN. | ||||
| SwwanStatsNetworkType | 1.3.6.1.4.1.1966.12.1.57.2.7 | DisplayString | RO | |
scalar · DisplayString · read-only · current The radio access technology used to connect to the network. | ||||
| SwwanStatsNetworkStatus | 1.3.6.1.4.1.1966.12.1.57.2.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current The network connection status. | ||||
| SwwanStatsNetworkName | 1.3.6.1.4.1.1966.12.1.57.2.9 | DisplayString | RO | |
scalar · DisplayString · read-only · current The name of the connected network. | ||||
| SwwanStatsAPN | 1.3.6.1.4.1.1966.12.1.57.2.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current The APN used to connect to the network. | ||||
| SwwanStatsSignalStrength | 1.3.6.1.4.1.1966.12.1.57.2.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The strength of the network signal. | ||||
| SwwanStatsIpAddress | 1.3.6.1.4.1.1966.12.1.57.2.12 | IpAddress | RO | |
scalar · IpAddress · read-only · current The current IP address of the IOLAN's WWAN interface. | ||||
| SwwanStatsRxBytes | 1.3.6.1.4.1.1966.12.1.57.2.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current RX byte count. | ||||
| SwwanStatsTxBytes | 1.3.6.1.4.1.1966.12.1.57.2.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current TX byte count. | ||||
| NsfpInfo | 1.3.6.1.4.1.1966.12.1.58 | |||
| TsfpModuleTable | 1.3.6.1.4.1.1966.12.1.58.1 | NA | ||
table · not-accessible · current Table of SFP information for Optical Transceivers | ||||
| RsfpModuleEntry | 1.3.6.1.4.1.1966.12.1.58.1.1 | NA | ||
row · not-accessible · current Entries of the table, each relating to a separate SFP module.
| ||||
| CsfpInterfaceIndex | 1.3.6.1.4.1.1966.12.1.58.1.1.1 | GenericTableIndex | NA | |
column · GenericTableIndex · not-accessible · current The Ethernet interface number. | ||||
| CsfpStatus | 1.3.6.1.4.1.1966.12.1.58.1.1.2 | Bits | RO | |
column · Bits · read-only · current This object identifies the status of the SFP module. If sfpCommFailed value is set then the rest of the data in this entry is invalid 0x80 - sfpModuleInserted 0x40 - sfpCommFailed 0x20 - sfpDmiSupported
| ||||
| CsfpVendorSerialNumber | 1.3.6.1.4.1.1966.12.1.58.1.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP's vendor serial number. | ||||
| CsfpVendorName | 1.3.6.1.4.1.1966.12.1.58.1.1.4 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP's vendor company name. | ||||
| CsfpVendorPartNumber | 1.3.6.1.4.1.1966.12.1.58.1.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP's vendor part number. | ||||
| CsfpConnectorType | 1.3.6.1.4.1.1966.12.1.58.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the SFP connector type.
| ||||
| CsfpNominalBitRate | 1.3.6.1.4.1.1966.12.1.58.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the SFP nominal bit rate of fiber interface, in megabits per second. | ||||
| CsfpLinkReach9125 | 1.3.6.1.4.1.1966.12.1.58.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the SFP DMI maximum length in meters of media supported by the fiber transceiver for 9 micron (125 micron jacket) single-mode fiber. | ||||
| CsfpLinkReach50125 | 1.3.6.1.4.1.1966.12.1.58.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the SFP maximum length in meters of media supported by the fiber transceiver for 50 micron (125 micron jacket) multi-mode fiber. | ||||
| CsfpLinkReach625125 | 1.3.6.1.4.1.1966.12.1.58.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the SFP maximum length in meters of media supported by the fiber transceiver for 62.5 micron (125 micron jacket) multi-mode fiber. | ||||
| CsfpReachCopper | 1.3.6.1.4.1.1966.12.1.58.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the maximum length in meters that is supported by the SFP/XFP interface using copper cable. | ||||
| CsfpFiberWaveLength | 1.3.6.1.4.1.1966.12.1.58.1.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object identifies the wavelength of the fiber interface's optical transceiver, in nanometers. | ||||
| CsfpDmiCurrentTempState | 1.3.6.1.4.1.1966.12.1.58.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the current alarm status for SFP DMI internally measured temperature.
| ||||
| CsfpDmiRealTimeTemp | 1.3.6.1.4.1.1966.12.1.58.1.1.14 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI real time temperature. | ||||
| CsfpDmiHighTempWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.15 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high temperature warning threshold. The value displayed will be either Celsius or Fahrenheit based on your current regional display settings. | ||||
| CsfpDmiHighTempAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.16 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high temperature warning threshold. | ||||
| CsfpDmiLowTempWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.17 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high temperature warning threshold. | ||||
| CsfpDmiLowTempAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.18 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high temperature warning threshold. | ||||
| CsfpDmiCurrentVoltState | 1.3.6.1.4.1.1966.12.1.58.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies current alarm status for SFP DMI internally measured voltage.
| ||||
| CsfpDmiRealTimeVolt | 1.3.6.1.4.1.1966.12.1.58.1.1.20 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI real time voltage in Volts. | ||||
| CsfpDmiHighVoltWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.21 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high voltage warning threshold in Volts | ||||
| CsfpDmiHighVoltAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.22 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high voltage warning threshold in Volts | ||||
| CsfpDmiLowVoltWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.23 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high voltage warning threshold in Volts | ||||
| CsfpDmiLowVoltAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.24 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high voltage warning threshold in Volts | ||||
| CsfpDmiCurrentTxBiasState | 1.3.6.1.4.1.1966.12.1.58.1.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies current alarm status for SFP DMI internally measured transmit bias current in milliamps.
| ||||
| CsfpDmiRealTimeTxBias | 1.3.6.1.4.1.1966.12.1.58.1.1.26 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high TX Bias current in milliamps. | ||||
| CsfpDmiHighTxBiasWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.27 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high TX Bias current warning threshold in milliamps. | ||||
| CsfpDmiHighTxBiasAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.28 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high TX Bias current alarm threshold in milliamps. | ||||
| CsfpDmiLowTxBiasWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.29 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low TX Bias current warning threshold in milliamps. | ||||
| CsfpDmiLowTxBiasAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.30 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low TX Bias current alarm threshold in milliamps. | ||||
| CsfpDmiCurrentTxPowerState | 1.3.6.1.4.1.1966.12.1.58.1.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies current alarm status for SFP DMI internally measured transmit power.
| ||||
| CsfpDmiRealTimeTxPower | 1.3.6.1.4.1.1966.12.1.58.1.1.32 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI real time TX output power. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiHighTxPowerWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.33 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiHighTxPowerAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.34 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiLowTxPowerWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.35 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low TX output power warning threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiLowTxPowerAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.36 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low TX output power alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiCurrentRxPowerState | 1.3.6.1.4.1.1966.12.1.58.1.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies current alarm status for SFP DMI internally measured receive power.
| ||||
| CsfpDmiRealTimeRxPower | 1.3.6.1.4.1.1966.12.1.58.1.1.38 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI real time RX received optical power. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiHighRxPowerWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.39 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiHighRxPowerAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.40 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI high RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiLowRxPowerWarn | 1.3.6.1.4.1.1966.12.1.58.1.1.41 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low RX received optical warning threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| CsfpDmiLowRxPowerAlarm | 1.3.6.1.4.1.1966.12.1.58.1.1.42 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object identifies the SFP DMI low RX received optical alarm threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. | ||||
| NfrontPanelInfo | 1.3.6.1.4.1.1966.12.1.59 | |||
| SfpStatus | 1.3.6.1.4.1.1966.12.1.59.1 | ContainerStatus | RW | |
scalar · ContainerStatus · read-write · current When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded. | ||||
| SfpLcdAutoScrollEnable | 1.3.6.1.4.1.1966.12.1.59.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines whether the front panel LCD will auto-scroll the specified screens
| ||||
| SfpLcdScrollDelay | 1.3.6.1.4.1.1966.12.1.59.3 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current Defines the time between screens when auto-scroll is enabled. | ||||
| SfpLcdIdleTimeout | 1.3.6.1.4.1.1966.12.1.59.4 | Integer32 (60..600) | RW | |
scalar · Integer32 (60..600) · read-write · current Defines the time after a keypad key is pressed before the auto-scroll will resume. | ||||
| SfpCustomTextLine1 | 1.3.6.1.4.1.1966.12.1.59.5 | DisplayString (SIZE (0..18)) | RW | |
scalar · DisplayString (SIZE (0..18)) · read-write · current Defines line 1 of the custom text screen. | ||||
| SfpCustomTextLine2 | 1.3.6.1.4.1.1966.12.1.59.6 | DisplayString (SIZE (0..18)) | RW | |
scalar · DisplayString (SIZE (0..18)) · read-write · current Defines line 2 of the custom text screen. | ||||
| SfpKeypadLock | 1.3.6.1.4.1.1966.12.1.59.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines whether the front panel keypad is locked for editing functions
| ||||
| SfpKeypadPin | 1.3.6.1.4.1.1966.12.1.59.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Request a Pin in order to have access to config and admin menus
| ||||
| SfpKeypadPinNumber | 1.3.6.1.4.1.1966.12.1.59.9 | DisplayString (SIZE (0..6)) | RW | |
scalar · DisplayString (SIZE (0..6)) · read-write · current Specifies the 6 numeric character pin which is required to reset the front panel config to factory default. | ||||
| NfpLcdScreenOrder | 1.3.6.1.4.1.1966.12.1.59.10 | |||
| SfpLcdScreenOrder1 | 1.3.6.1.4.1.1966.12.1.59.10.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 1.
| ||||
| SfpLcdScreenOrder2 | 1.3.6.1.4.1.1966.12.1.59.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 2.
| ||||
| SfpLcdScreenOrder3 | 1.3.6.1.4.1.1966.12.1.59.10.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 3.
| ||||
| SfpLcdScreenOrder4 | 1.3.6.1.4.1.1966.12.1.59.10.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 4.
| ||||
| SfpLcdScreenOrder5 | 1.3.6.1.4.1.1966.12.1.59.10.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 5.
| ||||
| SfpLcdScreenOrder6 | 1.3.6.1.4.1.1966.12.1.59.10.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 6.
| ||||
| SfpLcdScreenOrder7 | 1.3.6.1.4.1.1966.12.1.59.10.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 7.
| ||||
| SfpLcdScreenOrder8 | 1.3.6.1.4.1.1966.12.1.59.10.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 8.
| ||||
| SfpLcdScreenOrder9 | 1.3.6.1.4.1.1966.12.1.59.10.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 9.
| ||||
| SfpLcdScreenOrder10 | 1.3.6.1.4.1.1966.12.1.59.10.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 10.
| ||||
| SfpLcdScreenOrder11 | 1.3.6.1.4.1.1966.12.1.59.10.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 11.
| ||||
| SfpLcdScreenOrder12 | 1.3.6.1.4.1.1966.12.1.59.10.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the which screen is displayed in order 12.
| ||||
| NsdsMIBNotifications | 1.3.6.1.4.1.1966.12.2 | |||
| NsdsMIBNotificationsPrefix | 1.3.6.1.4.1.1966.12.2.0 | |||
| !sdsMIBIoDigitalInputAlarmSensor | 1.3.6.1.4.1.1966.12.2.0.1 | |||
notification · current A sdsMIBIoDigitalInputAlarmSensor trap signifies that the Digital I/O channel input sensor alarm has triggered.
| ||||
| !sdsMIBIoLineInputDSRAlarm | 1.3.6.1.4.1.1966.12.2.0.2 | |||
notification · current A sdsMIBIoLineInputDSRAlarm trap signifies that the Serial line DSR input alarm has triggered.
| ||||
| !sdsMIBIoLineInputDCDAlarm | 1.3.6.1.4.1.1966.12.2.0.3 | |||
notification · current A sdsMIBIoLineInputDCDAlarm trap signifies that the Serial line DCD input alarm has triggered.
| ||||
| !sdsMIBIoLineInputCTSAlarm | 1.3.6.1.4.1.1966.12.2.0.4 | |||
notification · current A sdsMIBIoLineInputCTSAlarm trap signifies that the Serial line CTS input alarm has triggered.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel1 | 1.3.6.1.4.1.1966.12.2.0.5 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel1 trap signifies that the Analog I/O channel input alarm has triggered at severity level 1.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel2 | 1.3.6.1.4.1.1966.12.2.0.6 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel2 trap signifies that the Analog I/O channel input alarm has triggered at severity level 2.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel3 | 1.3.6.1.4.1.1966.12.2.0.7 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel3 trap signifies that the Analog I/O channel input alarm has triggered at severity level 3.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel4 | 1.3.6.1.4.1.1966.12.2.0.8 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel4 trap signifies that the Analog I/O channel input alarm has triggered at severity level 4.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel5 | 1.3.6.1.4.1.1966.12.2.0.9 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel5 trap signifies that the Analog I/O channel input alarm has triggered at severity level 5.
| ||||
| !sdsMIBIoDigitalInputAlarmClear | 1.3.6.1.4.1.1966.12.2.0.10 | |||
notification · current A sdsMIBIoDigitalInputAlarmClear trap signifies that the Digital I/O channel input sensor alarm has cleared.
| ||||
| !sdsMIBIoLineInputDSRAlarmClear | 1.3.6.1.4.1.1966.12.2.0.11 | |||
notification · current A sdsMIBIoLineInputDSRAlarmClear trap signifies that the Serial line DSR input alarm has cleared.
| ||||
| !sdsMIBIoLineInputDCDAlarmClear | 1.3.6.1.4.1.1966.12.2.0.12 | |||
notification · current A sdsMIBIoLineInputDCDAlarmClear trap signifies that the Serial line DCD input alarm has cleared.
| ||||
| !sdsMIBIoLineInputCTSAlarmClear | 1.3.6.1.4.1.1966.12.2.0.13 | |||
notification · current A sdsMIBIoLineInputCTSAlarmClear trap signifies that the Serial line CTS input alarm has cleared.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel1Clear | 1.3.6.1.4.1.1966.12.2.0.14 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel1Clear trap signifies that the Analog I/O channel input alarm at severity level 1 has cleared.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel2Clear | 1.3.6.1.4.1.1966.12.2.0.15 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel2Clear trap signifies that the Analog I/O channel input alarm at severity level 2 has cleared.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel3Clear | 1.3.6.1.4.1.1966.12.2.0.16 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel3Clear trap signifies that the Analog I/O channel input alarm at severity level 3 has cleared.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel4Clear | 1.3.6.1.4.1.1966.12.2.0.17 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel4Clear trap signifies that the Analog I/O channel input alarm at severity level 4 has cleared.
| ||||
| !sdsMIBIoAnalogInputAlarmSeverityLevel5Clear | 1.3.6.1.4.1.1966.12.2.0.18 | |||
notification · current A sdsMIBIoAnalogInputAlarmSeverityLevel5Clear trap signifies that the Analog I/O channel input alarm at severity level 5 has cleared.
| ||||
| !sdsMIBEthernetLinkDown | 1.3.6.1.4.1.1966.12.2.0.19 | |||
notification · current A sdsMIBEthernetLinkDown trap signifies that the sending SNMP application entity recognizes a failure in one of the communications links represented in the agent's configuration.
| ||||
| !sdsMIBEthernetLinkUp | 1.3.6.1.4.1.1966.12.2.0.20 | |||
notification · current A sdsMIBEthernetLinkUp trap signifies that the sending SNMP application entity has detected that one of the communications links has transitioned out of the down state.
| ||||
| NsdsMIBConformance | 1.3.6.1.4.1.1966.12.3 | |||
| NsdsMIBCompliances | 1.3.6.1.4.1.1966.12.3.1 | |||
| MsdsMIBCompliance | 1.3.6.1.4.1.1966.12.3.1.1 | |||
compliance · current The compliance statement for sdsMIB which implement the Perle IOLAN SDS, SCS and STS MIB. | ||||
| NsdsMIBGroups | 1.3.6.1.4.1.1966.12.3.2 | |||
| GsdsMIBMainGroup | 1.3.6.1.4.1.1966.12.3.2.1 | |||
group · current The group of objects for identifying and determining the configuration and current timeliness values of the Perle IOLAN SDS, SCS and STS.
| ||||
| GsdsMIBNotificationsGroup | 1.3.6.1.4.1.1966.12.3.2.2 | |||
group · current The group of notifications which is implemented for the Perle IOLAN SDS, SCS and STS.
| ||||
Textual conventions
ContainerStatusINTEGERactive(1)applyChanges(4)discardChanges(6)modified(2)When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Once you have completed setting the variables in a folder, you will want to submit your changes to the Device Server. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6. 4-Indicates that the changes in the container folder are to be submitted to the Device Server. 6-Indicates that the changes in the container folder are to be discarded.
DateOCTET STRING (SIZE (8..10))A date specification. In the format dd/mm/yyyy field contents range ----- -------- ----- 1 day 1..31 2 month 1..12 3 year* 0..65536
GenericTableIndexInteger32 (1..2147483647)Display hint:
dAn arbitrary value that uniquely identifies the entity. The value should be a small, positive integer. Index values for different entities are not necessarily contiguous.
Hex32OCTET STRING (SIZE (4))Display hint:
4xRepresents a four octet hex value.
Hex8OCTET STRING (SIZE (1))Display hint:
1xRepresents a one byte octet hex value.
Ipv4v6AddressOCTET STRING (SIZE (0..255))Display hint:
255aAn IPv4 or IPv6 address
Ipv6InterfaceIdOCTET STRING (SIZE (0..255))Display hint:
255aAn IPv6 Interface Identifier. The first 64 bits must be 0
OnOffValueINTEGERoff(1)on(2)Represents an ON or OFF value.
PortNumberInteger32 (1..49)Display hint:
dSerial Port/Line number. Valid values are 1 to maximum port number the Device Server supports
TimeOCTET STRING (SIZE (5..8))A time specification. In the format hh:mm:ss field contents range ----- -------- ----- 1 hour 0..23 2 minutes 0..59 3 seconds 0..59
TrueportBaudINTEGERb110(3)b115200(17)b1200(9)b134(4)b150(5)b1800(10)b19200(14)b200(6)b230400(18)b2400(11)b28800(23)b300(7)b38400(15)b4800(12)b50(1)b57600(16)b600(8)b75(2)b9600(13)bCustom(24)Represents TruePort baudrate mapping.
YesNoValueINTEGERno(1)yes(2)Represents a YES or NO value.
Traps / Notifications
- sdsMIBEthernetLinkDown
1.3.6.1.4.1.1966.12.2.0.19 - sdsMIBEthernetLinkUp
1.3.6.1.4.1.1966.12.2.0.20 - sdsMIBIoAnalogInputAlarmSeverityLevel1
1.3.6.1.4.1.1966.12.2.0.5 - sdsMIBIoAnalogInputAlarmSeverityLevel1Clear
1.3.6.1.4.1.1966.12.2.0.14 - sdsMIBIoAnalogInputAlarmSeverityLevel2
1.3.6.1.4.1.1966.12.2.0.6 - sdsMIBIoAnalogInputAlarmSeverityLevel2Clear
1.3.6.1.4.1.1966.12.2.0.15 - sdsMIBIoAnalogInputAlarmSeverityLevel3
1.3.6.1.4.1.1966.12.2.0.7 - sdsMIBIoAnalogInputAlarmSeverityLevel3Clear
1.3.6.1.4.1.1966.12.2.0.16 - sdsMIBIoAnalogInputAlarmSeverityLevel4
1.3.6.1.4.1.1966.12.2.0.8 - sdsMIBIoAnalogInputAlarmSeverityLevel4Clear
1.3.6.1.4.1.1966.12.2.0.17 - sdsMIBIoAnalogInputAlarmSeverityLevel5
1.3.6.1.4.1.1966.12.2.0.9 - sdsMIBIoAnalogInputAlarmSeverityLevel5Clear
1.3.6.1.4.1.1966.12.2.0.18 - sdsMIBIoDigitalInputAlarmClear
1.3.6.1.4.1.1966.12.2.0.10 - sdsMIBIoDigitalInputAlarmSensor
1.3.6.1.4.1.1966.12.2.0.1 - sdsMIBIoLineInputCTSAlarm
1.3.6.1.4.1.1966.12.2.0.4 - sdsMIBIoLineInputCTSAlarmClear
1.3.6.1.4.1.1966.12.2.0.13 - sdsMIBIoLineInputDCDAlarm
1.3.6.1.4.1.1966.12.2.0.3 - sdsMIBIoLineInputDCDAlarmClear
1.3.6.1.4.1.1966.12.2.0.12 - sdsMIBIoLineInputDSRAlarm
1.3.6.1.4.1.1966.12.2.0.2 - sdsMIBIoLineInputDSRAlarmClear
1.3.6.1.4.1.1966.12.2.0.11