PEGASUS-SDH-MIB
Schmid Telecom AGThis MIB applies to the PEGASUS SDSL product manufactured by Schmid
Telecom Zurich. The MIB is modelled after the PEM management model, so
object hierarchy and individual variables agree with the PEM client. This
MIB represents an extension to the DS1-MIB and the SONET-MIB. These three
MIB files are used to manage the PEGASUS STM-1 card.
The PEGASUS-SDH-MIB contains five tables:
- stm1CardTable one entry for each STM-1 card configured.
- stm1CardClockTable one entry for each STM-1 card configured.
- ethernetIfTable one entry for each Ethernet interface of a
configured STM-1 card.
- vcTable one entry for each Virtual Container (VC-3/4/12).
- tugConfigTable one entry for each Tributary Unit Group (TUG-3).
Note
- The tables that represent extensions to the DS1-/SINET-MIB use the
ifIndex from IF-MIB (ifTable).snmptranslate -m PEGASUS-SDH-MIB -Tpsnmpwalk -v2c -c <community> -m PEGASUS-SDH-MIB <host> 1.3.6.1.4.1.6368.2.8Imports
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
|---|---|
| PEGASUS-MIB | AvailabilityStatusElem, CommStateEnum, OperStateEnum, pegasusMibModule |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IpegasusSdhMibModule | 1.3.6.1.4.1.6368.2.8 | |||
identity This MIB applies to the PEGASUS SDSL product manufactured by Schmid
Telecom Zurich. The MIB is modelled after the PEM management model, so
object hierarchy and individual variables agree with the PEM client. This
MIB represents an extension to the DS1-MIB and the SONET-MIB. These three
MIB files are used to manage the PEGASUS STM-1 card.
The PEGASUS-SDH-MIB contains five tables:
- stm1CardTable one entry for each STM-1 card configured.
- stm1CardClockTable one entry for each STM-1 card configured.
- ethernetIfTable one entry for each Ethernet interface of a
configured STM-1 card.
- vcTable one entry for each Virtual Container (VC-3/4/12).
- tugConfigTable one entry for each Tributary Unit Group (TUG-3).
Note
- The tables that represent extensions to the DS1-/SINET-MIB use the
ifIndex from IF-MIB (ifTable). | ||||
| Tstm1CardTable | 1.3.6.1.4.1.6368.2.8.1 | NA | ||
table · not-accessible · current A table containing stm1 card specific information. | ||||
| Rstm1CardEntry | 1.3.6.1.4.1.6368.2.8.1.1 | NA | ||
| Cstm1CardSlotNumber | 1.3.6.1.4.1.6368.2.8.1.1.1 | STM1SlotNumber | NA | |
column · STM1SlotNumber · not-accessible · current Slot number for stm1 card. | ||||
| Cstm1CardName | 1.3.6.1.4.1.6368.2.8.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the PEGASUS device. | ||||
| Cstm1CardHardwareVersion | 1.3.6.1.4.1.6368.2.8.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Hardware version of the STM-1 card. This is also called CHM-number (it always starts with the letters 'CHM'). The number '404' after 'CHM' identifies the card as a STM-1 card. | ||||
| Cstm1CardFirmwareVersion | 1.3.6.1.4.1.6368.2.8.1.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Version number and build date of the firmware running on the line card. The format is 'major.minor YYYYMMDD hh:mm'. | ||||
| Cstm1CardManufacturer | 1.3.6.1.4.1.6368.2.8.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Manufacturer of the STM-1 card. | ||||
| Cstm1CardSerialNumber | 1.3.6.1.4.1.6368.2.8.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Serial number of the line card. Also called HM-number, as it always starts with 'HM'. Example: HMVSS014810294. | ||||
| Cstm1CardMultiplexingMode | 1.3.6.1.4.1.6368.2.8.1.1.7 | MultiplexingModeEnum | RW | |
column · MultiplexingModeEnum · read-write · current Selects the SDH multiplexing mode. Either it is STM1-AU3-VC3 or STM1-AU4-VC4. | ||||
| Cstm1CardJ0TraceMonitoring | 1.3.6.1.4.1.6368.2.8.1.1.8 | OperStateEnum | RW | |
column · OperStateEnum · read-write · current If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. | ||||
| Cstm1CardJ1TraceMonitoring | 1.3.6.1.4.1.6368.2.8.1.1.9 | OperStateEnum | RW | |
column · OperStateEnum · read-write · current If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. | ||||
| Cstm1CardJ2TraceMonitoring | 1.3.6.1.4.1.6368.2.8.1.1.10 | OperStateEnum | RW | |
column · OperStateEnum · read-write · current If trace monitoring is disable no alarm is propagated to PEM and also no RDI/AIS is inserted. | ||||
| Cstm1CardJ0PathTraceSize | 1.3.6.1.4.1.6368.2.8.1.1.11 | TraceSizeEnum | RW | |
column · TraceSizeEnum · read-write · current Size of the Regenerator Section Trace Message. | ||||
| Cstm1CardJ0PathTraceSend | 1.3.6.1.4.1.6368.2.8.1.1.12 | DisplayString | RW | |
column · DisplayString · read-write · current Configurable Regenerator Section (RS) Trace Message. | ||||
| Cstm1CardJ0PathTraceExpected | 1.3.6.1.4.1.6368.2.8.1.1.13 | DisplayString | RW | |
column · DisplayString · read-write · current Regenerator Section (RS) Trace Message that should be received. | ||||
| Cstm1CardJ0PathTraceReceive | 1.3.6.1.4.1.6368.2.8.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current Regenerator Section (RS) Trace Message that is be received. | ||||
| Cstm1CardLaserOperationMode | 1.3.6.1.4.1.6368.2.8.1.1.15 | LaserOperationModeEnum | RW | |
column · LaserOperationModeEnum · read-write · current Configuration of the 'Automatic Laser Shutdown' feature. | ||||
| Cstm1CardLaserState | 1.3.6.1.4.1.6368.2.8.1.1.16 | LaserStateEnum | RO | |
column · LaserStateEnum · read-only · current Actual state of the laser. | ||||
| Cstm1CardOperState | 1.3.6.1.4.1.6368.2.8.1.1.17 | OperStateEnum | RO | |
column · OperStateEnum · read-only · current The operational state is a status property indicating whether or
not a device is physically installed and working.
enabled The device is partially or fully operable and available
for use.
disabled The device is totally inoperable and unavailable to provide
service. | ||||
| Cstm1CardAvailabilityState | 1.3.6.1.4.1.6368.2.8.1.1.18 | AvailabilityStatusElem | RO | |
column · AvailabilityStatusElem · read-only · current The availability status gives more detailed information about
failures within a device. An empty status set means that no error
exists. Possible status are:
in test The device is under test.
failed The device has an internal fault that prevents it from
operating.
power off The device requires power to be applied and is not
powered on.
off line The device requires a routine operation to be performed
to place it online and make it available for use.
off duty The device has been made inactive by an internal control
process in accordance with a predetermined time
schedule.
dependency The device can not operate because some other resource
on which it depends is unavailable.
degraded The device is partially defective but still operable.
not installed The device is not present, or incomplete.
log full The log is full. | ||||
| Cstm1CardMgmtCommState | 1.3.6.1.4.1.6368.2.8.1.1.19 | CommStateEnum | RO | |
column · CommStateEnum · read-only · current The Management Comm State indicates the state of the management
connection between the PEM Server and the STM-1 card.
disconnected No connection has been established.
init A connection has freshly been established on
the underlying protocol, but no management
information has been transmitted so far.
identification The connected device is being identified.
check hardware The connected hardware is compared to the one
stored in the configuration.
hardware adaptation If the configured and the existing device do
not match, an adoption is made. The behaviour
in this case can be configured with the 'HW
Adaptation Policy' option.
check program version The program version of the connected hardware
is compared to the one stored in the
configuration.
check config version The configuration version of the connected
hardware is compared to the one stored in the
configuration.
download config If a configuration version mismatch has been
detected and the 'Config Priority' of 'PEGASUS
system' is set to 'Device', the configuration
is downloaded from the device to the PEM
Server.
upload config If a configuration version mismatch has been
detected and the 'Config Priority' of 'PEGASUS
system' is set to 'Server', the configuration
is uploaded from the PEM Server to the device.
status synch The values of the status properties are being
synchronised.
resetting The device is resetting.
inactive The device is connected, but it is inactive,
that is not operational. This may be due to a
hardware mismatch.
active The management connection between the device
and the PEM Server is fully established and
the device is active. | ||||
| Cstm1CardPRBSGeneratorSink | 1.3.6.1.4.1.6368.2.8.1.1.20 | SdhInterfaceEnum | RW | |
column · SdhInterfaceEnum · read-write · current Determines, whether the PRBS Generator should be used on the optical or on the E1 links. | ||||
| Cstm1CardPRBSAnalyzerSource | 1.3.6.1.4.1.6368.2.8.1.1.21 | SdhInterfaceEnum | RW | |
column · SdhInterfaceEnum · read-write · current Determines, whether the PRBS Analyzer should be used on the optical or on the E1 links. | ||||
| Cstm1CardPRBSPattern | 1.3.6.1.4.1.6368.2.8.1.1.22 | PRBSPatternEnum | RW | |
column · PRBSPatternEnum · read-write · current Determines the PRBS Pattern to be used. | ||||
| Cstm1CardAlarmStatus | 1.3.6.1.4.1.6368.2.8.1.1.23 | Integer32 (1..511) | RO | |
column · Integer32 (1..511) · read-only · current This variable indicates the status of STM-1 card, regenerator section and multiplex section. It's a bitmap represented as a sum. Therefore multiple alarms can be displayed simultaneously. The value noAlarm is only set if there isn't any alarm active. The various bit positions are: 1 No alarm present -- STM-1 card -- 2 Initialization failure 4 Firmware Version Mismatch 8 Maintenance -- regenerator section RS -- 16 Loss of Signal (LOS) 32 Loss of Frame (LOF) 64 Trace ID Mismatch (RS-TIM) -- multiplex section MS -- 128 Alarm Indication Signal (MS-AIS) 256 Remote Defect Indication (MS-RDI, former FERF) | ||||
| Tstm1CardClockTable | 1.3.6.1.4.1.6368.2.8.2 | NA | ||
table · not-accessible · current A table containing stm1 card specific clock information. | ||||
| Rstm1CardClockEntry | 1.3.6.1.4.1.6368.2.8.2.1 | NA | ||
row · not-accessible · current Row and index definition for stm1 card clock table.
| ||||
| Cstm1CardActiveClockSource | 1.3.6.1.4.1.6368.2.8.2.1.1 | ClockSourceEnum | RO | |
column · ClockSourceEnum · read-only · current Displays which clock sourceis active and used as sync source. | ||||
| Cstm1CardClockSyncState | 1.3.6.1.4.1.6368.2.8.2.1.2 | ClockSyncStateEnum | RO | |
column · ClockSyncStateEnum · read-only · current Sync status is OK if RX or Reference clock is valid and used as active sync source. | ||||
| Cstm1CardTxLineClockQuality | 1.3.6.1.4.1.6368.2.8.2.1.3 | ClockQualityEnum | RW | |
column · ClockQualityEnum · read-write · current This is the clock quality of the outgoing SDH signal. The default sets the outgoing quality to the incoming quality. Sometime it may be useful to set a fix outgoing quality. | ||||
| Cstm1CardRxClockMode | 1.3.6.1.4.1.6368.2.8.2.1.4 | ClockModeEnum | RW | |
column · ClockModeEnum · read-write · current If enabled the RX line clock can be used as sync source. | ||||
| Cstm1CardRxClockPriority | 1.3.6.1.4.1.6368.2.8.2.1.5 | ClockPriorityEnum | RW | |
column · ClockPriorityEnum · read-write · current This value has always the opposite value of Reference Clock Priority. | ||||
| Cstm1CardRxClockQuality | 1.3.6.1.4.1.6368.2.8.2.1.6 | ClockQualityEnum | RO | |
column · ClockQualityEnum · read-only · current This is the clock quality of the incoming SDH signal. | ||||
| Cstm1CardRxClockState | 1.3.6.1.4.1.6368.2.8.2.1.7 | ClockStateEnum | RO | |
column · ClockStateEnum · read-only · current Clock status is valid if a good clock can be found on input (clock checker). | ||||
| Cstm1CardReferenceClockMode | 1.3.6.1.4.1.6368.2.8.2.1.8 | ClockModeEnum | RW | |
column · ClockModeEnum · read-write · current If enabled the Reference clock (V5 card input) can be used as sync source. | ||||
| Cstm1CardReferenceClockPriority | 1.3.6.1.4.1.6368.2.8.2.1.9 | ClockPriorityEnum | RW | |
column · ClockPriorityEnum · read-write · current This value has always the opposite value of Rx Clock Priority. | ||||
| Cstm1CardReferenceClockQuality | 1.3.6.1.4.1.6368.2.8.2.1.10 | ClockQualityEnum | RW | |
column · ClockQualityEnum · read-write · current Defines the quality of the reference clock input. This value will be transmitted in SDH-TX if reference clock is used as active sync source. | ||||
| Cstm1CardReferenceClockState | 1.3.6.1.4.1.6368.2.8.2.1.11 | ClockStateEnum | RO | |
column · ClockStateEnum · read-only · current Clock status is valid if a good clock can be found on input (clock checker). | ||||
| TethernetIfTable | 1.3.6.1.4.1.6368.2.8.3 | NA | ||
table · not-accessible · current This table contains additional information concerning the ethernet interfaces of a STM-1 card. It represents an extension of the if(X)Table (see IF-MIB). | ||||
| RethernetIfEntry | 1.3.6.1.4.1.6368.2.8.3.1 | NA | ||
| CetherIfConcatenationOption | 1.3.6.1.4.1.6368.2.8.3.1.1 | ConcatenationTypeEnum | RW | |
column · ConcatenationTypeEnum · read-write · current Configuration of the Link Capacity Adjustment Scheme. | ||||
| CetherIfEncapsulation | 1.3.6.1.4.1.6368.2.8.3.1.2 | EthernetIfEncapsulationEnum | RO | |
column · EthernetIfEncapsulationEnum · read-only · current This attribute shows the used Ethernet encapsulation protocol. | ||||
| CetherIfOrderLevel | 1.3.6.1.4.1.6368.2.8.3.1.3 | OrderLevelEnum | RO | |
column · OrderLevelEnum · read-only · current Only relevant, if SDH Multiplexing Mode (see STM-1 card propertied) is set to VC3. | ||||
| CetherIfAlarmStatus | 1.3.6.1.4.1.6368.2.8.3.1.4 | Integer32 (1..511) | RO | |
column · Integer32 (1..511) · read-only · current This variable indicates the status of an Ethernet Interface. It's
a bitmap represented as a sum. Therefore multiple defects can be
displayed simultaneously. The value noAlarm is only set if there
isn't any alarm.
The various bit positions are (LO = LowOrder, HO = HighOrder):
1 No alarm
2 LO LCAS group identifier mismatch (Rx)
4 HO LCAS group identifier mismatch (Rx)
8 LO VCG exceeds max. differential delay (Rx)
16 HO VCG exceeds max. differential delay (Rx)
32 LO VCG exceeds max. differential delay, calculated over all
containers (Rx)
64 HO VCG exceeds max. differential delay, calculated over all
containers (Rx)
128 Transmit FIFO overflow (Tx)
256 Rx head-of-line blocking FIFO overflow | ||||
| TvcTable | 1.3.6.1.4.1.6368.2.8.4 | NA | ||
table · not-accessible · current This table contains additional information for VC concerning the multiplexing configuration. It's an extension of the ifTable (IF-MIB) and the tables of the SONET/SDH-MIB. | ||||
| RvcEntry | 1.3.6.1.4.1.6368.2.8.4.1 | NA | ||
| CvcType | 1.3.6.1.4.1.6368.2.8.4.1.1 | VirtualContainerTypeEnum | RO | |
column · VirtualContainerTypeEnum · read-only · current Type of Virtual Container (VC). In Pegasus VC-4, VC-3 or VC-12. | ||||
| CvcRelatedTUG | 1.3.6.1.4.1.6368.2.8.4.1.2 | TUGIndexOrZero | RO | |
column · TUGIndexOrZero · read-only · current Represents the index of the Tributary Unit Group within the
tugConfigTable to which this VC is assigned to. The value depends
also on the multiplexing mode. If the value is 0, there doesn't
exist the relation VC-x to TUG-3. Possible values:
1) multiplexing mode = AU-4:
VC-4: vcRelatedTUG = 0
VC-3/12: vcRelatedTUG = 1..3
2) multiplexing mode = AU-3:
vcRelatedTUG = 0 (no dependency on VC type) | ||||
| CvcRelatedVC | 1.3.6.1.4.1.6368.2.8.4.1.3 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current Represents the index of the Virtual Container within the
ifTable to which this VC is assigned to. The value depends
also on the multiplexing mode. If the value is 0, there doesn't
exist the relation VC-x to VC-x. Possible values:
1) multiplexing mode = AU-4:
vcRelatedVC = 0 (no dependency on VC type)
2) multiplexing mode = AU-3:
VC-3: vcRelatedVC = 0
VC-12: vcRelatedVC = 2031..2033 (example for slot 2) | ||||
| CvcAssignedIfIndex | 1.3.6.1.4.1.6368.2.8.4.1.4 | InterfaceIndexOrZero | RW | |
column · InterfaceIndexOrZero · read-write · current Represents the index of the interface within the ifTable (IF-MIB) that transmits to this VC. | ||||
| CvcPathTraceSend | 1.3.6.1.4.1.6368.2.8.4.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current The value of the outgoing J1 Byte VC Path Trace byte message. | ||||
| CvcPathTraceExpected | 1.3.6.1.4.1.6368.2.8.4.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current The value of the expected J1 Byte VC Path Trace byte message. | ||||
| CvcPathTraceReceive | 1.3.6.1.4.1.6368.2.8.4.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The value of the incoming J1 Byte VC Path Trace byte message. | ||||
| CvcSignalLabelSend | 1.3.6.1.4.1.6368.2.8.4.1.8 | SignalLabel | RW | |
column · SignalLabel · read-write · current The outgoing C2 VC Signal Label (0x02 = TUG structure). | ||||
| CvcSignalLabelExpected | 1.3.6.1.4.1.6368.2.8.4.1.9 | SignalLabel | RW | |
column · SignalLabel · read-write · current The expected C2 VC Signal Label (0x02 = TUG structure). | ||||
| CvcSignalLabelReceive | 1.3.6.1.4.1.6368.2.8.4.1.10 | SignalLabel | RO | |
column · SignalLabel · read-only · current The incoming C2 VC Signal Label (0x02 = TUG structure). | ||||
| CvcAlarmStatus | 1.3.6.1.4.1.6368.2.8.4.1.11 | Integer32 (1..524287) | RO | |
column · Integer32 (1..524287) · read-only · current This variable indicates the status of the VC. It's a bitmap represented as a sum. Therefore multiple defects can be displayed simultaneously. The value noDefect should only be set if there is no other defect. Some alarms can't occur actually. The various bit positions are: 1 vcNoDefect 2 vcAlarmAIS 4 vcAlarmLOP 8 vcAlarmRDI 16 vcAlarmUnequipped 32 vcAlarmPLM 64 vcAlarmTIM 128 vcAlarmLOM 256 vcAlarmRFI 512 vcgTxAddTimeout -- not used (deprecated) 1024 vcgTxAdd -- not used (deprecated) 2048 vcgTxRemove -- not used (deprecated) 4096 vcgTxDnu -- not used (deprecated) 8192 vcgDnuOk -- not used (deprecated) 16384 vcgRxAdd -- not used (deprecated) 32768 vcgRxRemove -- not used (deprecated) 65536 vcgRxFail -- not used (deprecated) 131072 vcgLcasCrcError 262144 vcgNonLcasSeqError | ||||
| TtugConfigTable | 1.3.6.1.4.1.6368.2.8.5 | NA | ||
table · not-accessible · current This table contains information concerning Tributary Unit Groups. If AU-3 structure is used, this table is empty. | ||||
| RtugConfigEntry | 1.3.6.1.4.1.6368.2.8.5.1 | NA | ||
| CtugIndex | 1.3.6.1.4.1.6368.2.8.5.1.1 | TUGIndex | NA | |
column · TUGIndex · not-accessible · current Number of the TUG. Range 1..3 | ||||
| CtugRelatedVC4 | 1.3.6.1.4.1.6368.2.8.5.1.2 | InterfaceIndex | RO | |
| CtugOrderLevel | 1.3.6.1.4.1.6368.2.8.5.1.3 | OrderLevelEnum | RW | |
column · OrderLevelEnum · read-write · current Individual Order Level of this TUG. If high order is used, the TUG has exactly one VC-3 and no VC-12s. If low order is used, the TUG has exactly 21 VC-12 and no VC-3. | ||||
| SsdhMibRevision | 1.3.6.1.4.1.6368.2.8.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current The version number assigned by the version control system. You can query this from the agent, to find out with which version of the MIB was built into the agent. The value is also present in copies of the MIB to feed into SNMP managers. Comparing the version numbers from both sources can help to detect mismatches. The revision string for this version is: $Workfile: PEGASUS-SDH-MIB.txt $ $Revision: 14 $ $Date: 3/18/04 6:40p $ | ||||
Textual conventions
SignalLabelINTEGER (0..7 | 18..26 | 207 | 225..252 | 254..255)Display hint:
xRepresentation of a VC Signal Label. The meaning of the SignalLabel depends on the type of vitual container. VC-12s use the following values: 001b Unequipped 001b Equipped (non specific) 010b Asynchronous 011b Bit Synchronous 100b Byte Synchronous 101b Reserved for future use 110b Test signal (O.181) 111b VC-AIS VC-4 and VC-3 use these values: 00h Unequipped or supervisory-unequipped 01h Equipped - non-specific 02h TUG Structure 03h Locked TU-n 04h Asynch. mapping of 34'386/44'736 kbit/s into Container-3 12h Asynch. mapping of 139'264 kbit/s into Container-4 13h ATM Mapping 14h MAN DQDB (IEEE 802.6 mapping 15h FDDI (ISO 9314) mapping 16h Mapping of HDLC/PPP framed signal 17h Mapping of SDL with SDH self synch. Scrambler 18h Mapping of HDLC/LAP-S framed signals 19h Mapping of SDL with set-reset scrambler 1Ah Mapping of 10 Gbit/s Ethernet frames (IEEE 802.3) CFh Obsolete mapping of HDLC/PPP framed signal E1h-FCh Reserved for national use FEh Test signal, O.181 specific mapping FFh VC-AIS