PBN-MIB
Pacific Broadbank Networkssnmptranslate -m PBN-MIB -Tpsnmpwalk -v2c -c <community> -m PBN-MIB <host> 1.3.6.1.4.1.11606Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Npbn | 1.3.6.1.4.1.11606 | |||
| NpbnTrap | 1.3.6.1.4.1.11606.0 | |||
| !module15 | 1.3.6.1.4.1.11606.0.0.15 | |||
notification PBN Module 1 Param 5 Alarm notification
| ||||
| !module16 | 1.3.6.1.4.1.11606.0.0.16 | |||
notification PBN Module 1 Param 6 Alarm notification
| ||||
| !module17 | 1.3.6.1.4.1.11606.0.0.17 | |||
notification PBN Module 1 Param 7 Alarm notification
| ||||
| !module18 | 1.3.6.1.4.1.11606.0.0.18 | |||
notification PBN Module 1 Param 8 Alarm notification
| ||||
| !module19 | 1.3.6.1.4.1.11606.0.0.19 | |||
notification PBN Module 1 Param 9 notification
| ||||
| !module25 | 1.3.6.1.4.1.11606.0.0.25 | |||
notification PBN Module 2 Param 5 notification
| ||||
| !module26 | 1.3.6.1.4.1.11606.0.0.26 | |||
notification PBN Module 2 Param 6 notification
| ||||
| !module27 | 1.3.6.1.4.1.11606.0.0.27 | |||
notification PBN Module 2 Param 7 notification
| ||||
| !module28 | 1.3.6.1.4.1.11606.0.0.28 | |||
notification PBN Module 2 Param 8 notification
| ||||
| !module29 | 1.3.6.1.4.1.11606.0.0.29 | |||
notification PBN Module 2 Param 9 notification
| ||||
| !module35 | 1.3.6.1.4.1.11606.0.0.35 | |||
notification PBN Module 3 Param 5 notification
| ||||
| !module36 | 1.3.6.1.4.1.11606.0.0.36 | |||
notification PBN Module 3 Param 6 notification
| ||||
| !module37 | 1.3.6.1.4.1.11606.0.0.37 | |||
notification PBN Module 3 Param 7 notification
| ||||
| !module38 | 1.3.6.1.4.1.11606.0.0.38 | |||
notification PBN Module 3 Param 8 notification
| ||||
| !module39 | 1.3.6.1.4.1.11606.0.0.39 | |||
notification PBN Module 3 Param 9 notification
| ||||
| !module45 | 1.3.6.1.4.1.11606.0.0.45 | |||
notification PBN Module 4 Param 5 notification
| ||||
| !module46 | 1.3.6.1.4.1.11606.0.0.46 | |||
notification PBN Module 4 Param 6 notification
| ||||
| !module47 | 1.3.6.1.4.1.11606.0.0.47 | |||
notification PBN Module 4 Param 7 notification
| ||||
| !module48 | 1.3.6.1.4.1.11606.0.0.48 | |||
notification PBN Module 4 Param 8 notification
| ||||
| !module49 | 1.3.6.1.4.1.11606.0.0.49 | |||
notification PBN Module 4 Param 9 notification
| ||||
| !module110 | 1.3.6.1.4.1.11606.0.0.110 | |||
notification PBN Module 1 Param 10 notification
| ||||
| !module111 | 1.3.6.1.4.1.11606.0.0.111 | |||
notification PBN Module 1 Param 11 notification
| ||||
| !module112 | 1.3.6.1.4.1.11606.0.0.112 | |||
notification PBN Module 1 Param 12 notification
| ||||
| !module113 | 1.3.6.1.4.1.11606.0.0.113 | |||
notification PBN Module 1 Param 13 notification
| ||||
| !module114 | 1.3.6.1.4.1.11606.0.0.114 | |||
notification PBN Module 1 Param 14 notification
| ||||
| !module115 | 1.3.6.1.4.1.11606.0.0.115 | |||
notification PBN Module 1 Param 15 notification
| ||||
| !module116 | 1.3.6.1.4.1.11606.0.0.116 | |||
notification PBN Module 1 Param 16 notification
| ||||
| !module117 | 1.3.6.1.4.1.11606.0.0.117 | |||
notification PBN Module 1 Param 17 notification
| ||||
| !module118 | 1.3.6.1.4.1.11606.0.0.118 | |||
notification PBN Module 1 Param 18 notification
| ||||
| !module119 | 1.3.6.1.4.1.11606.0.0.119 | |||
notification PBN Module 1 Param 19 notification
| ||||
| !module120 | 1.3.6.1.4.1.11606.0.0.120 | |||
notification PBN Module 1 Param 20 notification
| ||||
| !module121 | 1.3.6.1.4.1.11606.0.0.121 | |||
notification PBN Module 1 Param 21 notification
| ||||
| !module122 | 1.3.6.1.4.1.11606.0.0.122 | |||
notification PBN Module 1 Param 22 notification
| ||||
| !module123 | 1.3.6.1.4.1.11606.0.0.123 | |||
notification PBN Module 1 Param 23 notification
| ||||
| !module124 | 1.3.6.1.4.1.11606.0.0.124 | |||
notification PBN Module 1 Param 24 notification
| ||||
| !module125 | 1.3.6.1.4.1.11606.0.0.125 | |||
notification PBN Module 1 Param 25 notification
| ||||
| !module126 | 1.3.6.1.4.1.11606.0.0.126 | |||
notification PBN Module 1 Param 26 notification
| ||||
| !module127 | 1.3.6.1.4.1.11606.0.0.127 | |||
notification PBN Module 1 Param 27 notification
| ||||
| !module128 | 1.3.6.1.4.1.11606.0.0.128 | |||
notification PBN Module 1 Param 28 notification
| ||||
| !module129 | 1.3.6.1.4.1.11606.0.0.129 | |||
notification PBN Module 1 Param 29 notification
| ||||
| !module130 | 1.3.6.1.4.1.11606.0.0.130 | |||
notification PBN Module 1 Param 30 notification
| ||||
| !module131 | 1.3.6.1.4.1.11606.0.0.131 | |||
notification PBN Module 1 Param 31 notification
| ||||
| !module210 | 1.3.6.1.4.1.11606.0.0.210 | |||
notification PBN Module 2 Param 10 notification
| ||||
| !module211 | 1.3.6.1.4.1.11606.0.0.211 | |||
notification PBN Module 2 Param 11 notification
| ||||
| !module212 | 1.3.6.1.4.1.11606.0.0.212 | |||
notification PBN Module 2 Param 12 notification
| ||||
| !module213 | 1.3.6.1.4.1.11606.0.0.213 | |||
notification PBN Module 2 Param 13 notification
| ||||
| !module214 | 1.3.6.1.4.1.11606.0.0.214 | |||
notification PBN Module 2 Param 14 notification
| ||||
| !module215 | 1.3.6.1.4.1.11606.0.0.215 | |||
notification PBN Module 2 Param 15 notification
| ||||
| !module216 | 1.3.6.1.4.1.11606.0.0.216 | |||
notification PBN Module 2 Param 16 notification
| ||||
| !module217 | 1.3.6.1.4.1.11606.0.0.217 | |||
notification PBN Module 2 Param 17 notification
| ||||
| !module218 | 1.3.6.1.4.1.11606.0.0.218 | |||
notification PBN Module 2 Param 18 notification
| ||||
| !module219 | 1.3.6.1.4.1.11606.0.0.219 | |||
notification PBN Module 2 Param 19 Alarm notification
| ||||
| !module220 | 1.3.6.1.4.1.11606.0.0.220 | |||
notification PBN Module 2 Param 20 notification
| ||||
| !module221 | 1.3.6.1.4.1.11606.0.0.221 | |||
notification PBN Module 2 Param 21 notification
| ||||
| !module222 | 1.3.6.1.4.1.11606.0.0.222 | |||
notification PBN Module 2 Param 22 notification
| ||||
| !module223 | 1.3.6.1.4.1.11606.0.0.223 | |||
notification PBN Module 2 Param 23 notification
| ||||
| !module224 | 1.3.6.1.4.1.11606.0.0.224 | |||
notification PBN Module 2 Param 24 notification
| ||||
| !module225 | 1.3.6.1.4.1.11606.0.0.225 | |||
notification PBN Module 2 Param 25 notification
| ||||
| !module226 | 1.3.6.1.4.1.11606.0.0.226 | |||
notification PBN Module 2 Param 26 notification
| ||||
| !module227 | 1.3.6.1.4.1.11606.0.0.227 | |||
notification PBN Module 2 Param 27 notification
| ||||
| !module228 | 1.3.6.1.4.1.11606.0.0.228 | |||
notification PBN Module 2 Param 28 notification
| ||||
| !module229 | 1.3.6.1.4.1.11606.0.0.229 | |||
notification PBN Module 2 Param 29 notification
| ||||
| !module230 | 1.3.6.1.4.1.11606.0.0.230 | |||
notification PBN Module 2 Param 30 notification
| ||||
| !module231 | 1.3.6.1.4.1.11606.0.0.231 | |||
notification PBN Module 2 Param 31 notification
| ||||
| !module310 | 1.3.6.1.4.1.11606.0.0.310 | |||
notification PBN Module 3 Param 10 notification
| ||||
| !module311 | 1.3.6.1.4.1.11606.0.0.311 | |||
notification PBN Module 3 Param 11 notification
| ||||
| !module312 | 1.3.6.1.4.1.11606.0.0.312 | |||
notification PBN Module 3 Param 12 notification
| ||||
| !module313 | 1.3.6.1.4.1.11606.0.0.313 | |||
notification PBN Module 3 Param 13 notification
| ||||
| !module314 | 1.3.6.1.4.1.11606.0.0.314 | |||
notification PBN Module 3 Param 14 notification
| ||||
| !module315 | 1.3.6.1.4.1.11606.0.0.315 | |||
notification PBN Module 3 Param 15 notification
| ||||
| !module316 | 1.3.6.1.4.1.11606.0.0.316 | |||
notification PBN Module 3 Param 16 notification
| ||||
| !module317 | 1.3.6.1.4.1.11606.0.0.317 | |||
notification PBN Module 3 Param 17 notification
| ||||
| !module318 | 1.3.6.1.4.1.11606.0.0.318 | |||
notification PBN Module 3 Param 18 notification
| ||||
| !module319 | 1.3.6.1.4.1.11606.0.0.319 | |||
notification PBN Module 3 Param 19 notification
| ||||
| !module320 | 1.3.6.1.4.1.11606.0.0.320 | |||
notification PBN Module 3 Param 20 notification
| ||||
| !module321 | 1.3.6.1.4.1.11606.0.0.321 | |||
notification PBN Module 3 Param 21 notification
| ||||
| !module322 | 1.3.6.1.4.1.11606.0.0.322 | |||
notification PBN Module 3 Param 22 notification
| ||||
| !module323 | 1.3.6.1.4.1.11606.0.0.323 | |||
notification PBN Module 3 Param 23 notification
| ||||
| !module324 | 1.3.6.1.4.1.11606.0.0.324 | |||
notification PBN Module 3 Param 24 notification
| ||||
| !module325 | 1.3.6.1.4.1.11606.0.0.325 | |||
notification PBN Module 3 Param 25 notification
| ||||
| !module326 | 1.3.6.1.4.1.11606.0.0.326 | |||
notification PBN Module 3 Param 26 notification
| ||||
| !module327 | 1.3.6.1.4.1.11606.0.0.327 | |||
notification PBN Module 3 Param 27 notification
| ||||
| !module328 | 1.3.6.1.4.1.11606.0.0.328 | |||
notification PBN Module 3 Param 28 notification
| ||||
| !module329 | 1.3.6.1.4.1.11606.0.0.329 | |||
notification PBN Module 3 Param 29 notification
| ||||
| !module330 | 1.3.6.1.4.1.11606.0.0.330 | |||
notification PBN Module 3 Param 30 notification
| ||||
| !module331 | 1.3.6.1.4.1.11606.0.0.331 | |||
notification PBN Module 3 Param 31 notification
| ||||
| !module410 | 1.3.6.1.4.1.11606.0.0.410 | |||
notification PBN Module 4 Param 10 notification
| ||||
| !module411 | 1.3.6.1.4.1.11606.0.0.411 | |||
notification PBN Module 4 Param 11 notification
| ||||
| !mauStatus5VTrap | 1.3.6.1.4.1.11606.0.0.415 | |||
notification
| ||||
| !mauStatus12VTrap | 1.3.6.1.4.1.11606.0.0.416 | |||
notification
| ||||
| !mauStatus24VTrap | 1.3.6.1.4.1.11606.0.0.417 | |||
notification
| ||||
| !mauStatusInputOpticalPowerTrap | 1.3.6.1.4.1.11606.0.0.418 | |||
notification | ||||
| !mauStatusOutputOpticalPowerTrap | 1.3.6.1.4.1.11606.0.0.419 | |||
notification | ||||
| !mauStatusRFOutputTrap | 1.3.6.1.4.1.11606.0.0.420 | |||
notification | ||||
| !mauStatusTemperatureTrap | 1.3.6.1.4.1.11606.0.0.421 | |||
notification | ||||
| !mauStatusLidTrap | 1.3.6.1.4.1.11606.0.0.422 | |||
notification
| ||||
| Nocm | 1.3.6.1.4.1.11606.1 | |||
| SpbnDevice | 1.3.6.1.4.1.11606.1.1 | INTEGER (1 | 2 | 30) | RO | mandatory |
scalar · INTEGER (1 | 2 | 30) · read-only · mandatory PBN Networks Management Devices | ||||
| SdeviceAddress | 1.3.6.1.4.1.11606.1.2 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory PBN Networks Management Device Address | ||||
| SocmSlot | 1.3.6.1.4.1.11606.1.3 | INTEGER (0..8) | RW | mandatory |
scalar · INTEGER (0..8) · read-write · mandatory The OCM slot of the PBN device | ||||
| SocmPage | 1.3.6.1.4.1.11606.1.4 | INTEGER (0..7) | RW | mandatory |
scalar · INTEGER (0..7) · read-write · mandatory The Device Page | ||||
| SocmParam | 1.3.6.1.4.1.11606.1.5 | INTEGER (0..31) | RW | mandatory |
scalar · INTEGER (0..31) · read-write · mandatory The Device Parameter | ||||
| SocmParamStatus | 1.3.6.1.4.1.11606.1.6 | INTEGER (0..3) | RO | mandatory |
scalar · INTEGER (0..3) · read-only · mandatory The parameter status | ||||
| SocmParamString | 1.3.6.1.4.1.11606.1.7 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The parameter string | ||||
| SocmWriteParameterValue | 1.3.6.1.4.1.11606.1.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The Write Parameter Value ID | ||||
| SocmToggleParameterValue | 1.3.6.1.4.1.11606.1.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The Toggle Parameter Value ID | ||||
| SocmReadParameterValue | 1.3.6.1.4.1.11606.1.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The Toggle Parameter Value ID | ||||
| Ncpon100 | 1.3.6.1.4.1.11606.2 | |||
| Ncpon100Trap | 1.3.6.1.4.1.11606.2.0 | |||
| !cpon100ContactInput | 1.3.6.1.4.1.11606.2.0.0.412 | |||
notification CPON-100 Tamper alarm | ||||
| !cpon100sensingInput | 1.3.6.1.4.1.11606.2.0.0.413 | |||
notification CPON-100 Battery alarm | ||||
| !cpon100CATVAlarm | 1.3.6.1.4.1.11606.2.0.0.414 | |||
| ScatvCtrl | 1.3.6.1.4.1.11606.2.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory CATV Service Control | ||||
| SmasterAlarmStatus | 1.3.6.1.4.1.11606.2.2 | INTEGER (0..1) | RO | obsolete |
scalar · INTEGER (0..1) · read-only · obsolete Master Alarm Status | ||||
| ScontactInput | 1.3.6.1.4.1.11606.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Tamper Status | ||||
| ScatvStatus | 1.3.6.1.4.1.11606.2.4 | INTEGER (0..3) | RO | mandatory |
scalar · INTEGER (0..3) · read-only · mandatory CATV Service Status | ||||
| SsensingInput | 1.3.6.1.4.1.11606.2.5 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Sensing Input | ||||
| SglobalPktSize | 1.3.6.1.4.1.11606.2.6 | INTEGER (0..2) | RW | mandatory |
scalar · INTEGER (0..2) · read-write · mandatory Packet Size | ||||
| SglobalMulticastStormProtection | 1.3.6.1.4.1.11606.2.7 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Multicast Storm Protection | ||||
| SglobalFlowCtrl | 1.3.6.1.4.1.11606.2.8 | INTEGER (0..3) | RW | mandatory |
scalar · INTEGER (0..3) · read-write · mandatory Flow Control | ||||
| SglobalBackPressureMode | 1.3.6.1.4.1.11606.2.9 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Back Pressure Mode | ||||
| SglobalPriorityBufferReserve | 1.3.6.1.4.1.11606.2.10 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Priority Buffer Reserve | ||||
| SglobalPriorityScheme | 1.3.6.1.4.1.11606.2.11 | INTEGER (0..3) | RW | mandatory |
scalar · INTEGER (0..3) · read-write · mandatory Priority Scheme Select | ||||
| Sglobal802dot1PBasedPriority | 1.3.6.1.4.1.11606.2.12 | INTEGER (0..7) | RW | mandatory |
scalar · INTEGER (0..7) · read-write · mandatory 802.1p Based priority | ||||
| Sglobal802dot1qVLANEnable | 1.3.6.1.4.1.11606.2.13 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory 802.1q VLAN enable | ||||
| SglobalNullVIDReplacement | 1.3.6.1.4.1.11606.2.14 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Null VID Replacement | ||||
| SsourceMACPauseCtrl | 1.3.6.1.4.1.11606.2.15 | Opaque (SIZE (6)) | RW | mandatory |
scalar · Opaque (SIZE (6)) · read-write · mandatory Source Address MAC Pause | ||||
| SglobalFastAge | 1.3.6.1.4.1.11606.2.16 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Fast Age | ||||
| Scpon100MACAddr | 1.3.6.1.4.1.11606.2.17 | OCTET STRING (SIZE (0..5)) | RO | mandatory |
scalar · OCTET STRING (SIZE (0..5)) · read-only · mandatory CPON-100 SNMP MAC Address | ||||
| Scpon100TrapStatus | 1.3.6.1.4.1.11606.2.18 | INTEGER (0..2) | RO | mandatory |
scalar · INTEGER (0..2) · read-only · mandatory CPON-100 Trap severity | ||||
| Scpon100TrapMsg | 1.3.6.1.4.1.11606.2.19 | DisplayString (SIZE (0..63)) | RO | mandatory |
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory CPON-100 Trap Message | ||||
| NvlanTable | 1.3.6.1.4.1.11606.2.21 | |||
| SvlanAddr1 | 1.3.6.1.4.1.11606.2.21.1 | INTEGER (0..16777215) | RW | mandatory |
scalar · INTEGER (0..16777215) · read-write · mandatory CPON-100-100 VLAN1 | ||||
| SvlanAddr2 | 1.3.6.1.4.1.11606.2.21.2 | INTEGER (0..16777215) | RW | mandatory |
scalar · INTEGER (0..16777215) · read-write · mandatory CPON-100 VLAN2 | ||||
| SvlanAddr3 | 1.3.6.1.4.1.11606.2.21.3 | INTEGER (0..16777215) | RW | mandatory |
scalar · INTEGER (0..16777215) · read-write · mandatory CPON-100 VLAN3 | ||||
| NstaticMACTable | 1.3.6.1.4.1.11606.2.22 | |||
| SstaticMAC1 | 1.3.6.1.4.1.11606.2.22.1 | Opaque (SIZE (8)) | RW | mandatory |
scalar · Opaque (SIZE (8)) · read-write · mandatory Static MAC entry 1 | ||||
| SstaticMAC2 | 1.3.6.1.4.1.11606.2.22.2 | Opaque (SIZE (8)) | RW | mandatory |
scalar · Opaque (SIZE (8)) · read-write · mandatory Static MAC entry 2 | ||||
| SstaticMAC3 | 1.3.6.1.4.1.11606.2.22.3 | Opaque (SIZE (8)) | RW | mandatory |
scalar · Opaque (SIZE (8)) · read-write · mandatory Static MAC entry 3 | ||||
| SstaticMAC4 | 1.3.6.1.4.1.11606.2.22.4 | Opaque (SIZE (8)) | RW | mandatory |
scalar · Opaque (SIZE (8)) · read-write · mandatory Static MAC entry 4 | ||||
| SstaticMAC5 | 1.3.6.1.4.1.11606.2.22.5 | Opaque (SIZE (8)) | RW | mandatory |
scalar · Opaque (SIZE (8)) · read-write · mandatory Static MAC entry 5 | ||||
| NdynamicMACTable | 1.3.6.1.4.1.11606.2.23 | |||
| SmacEntryCnt | 1.3.6.1.4.1.11606.2.23.1 | INTEGER (0..1024) | RO | mandatory |
scalar · INTEGER (0..1024) · read-only · mandatory Dynamic MAC Entry Count | ||||
| SmacEntryID | 1.3.6.1.4.1.11606.2.23.2 | INTEGER (0..1024) | RW | mandatory |
scalar · INTEGER (0..1024) · read-write · mandatory Dynamic MAC Entry ID | ||||
| SmacEntry | 1.3.6.1.4.1.11606.2.23.3 | Opaque (SIZE (8)) | RO | mandatory |
scalar · Opaque (SIZE (8)) · read-only · mandatory Dynamic MAC entry data | ||||
| Ncpon100Port1 | 1.3.6.1.4.1.11606.2.24 | |||
| Sport1LinkStatus | 1.3.6.1.4.1.11606.2.24.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port1 Link Status | ||||
| Sport1MDIXStatus | 1.3.6.1.4.1.11606.2.24.2 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port1 MID-X Status | ||||
| Sport1AutoNegotiationStatus | 1.3.6.1.4.1.11606.2.24.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port1 Auto-Negotiation Status | ||||
| Sport1LinkCapability | 1.3.6.1.4.1.11606.2.24.4 | INTEGER (0..15) | RO | mandatory |
scalar · INTEGER (0..15) · read-only · mandatory Link Capability | ||||
| Sport1FlowCtrlCapability | 1.3.6.1.4.1.11606.2.24.5 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port1 Flow Control Capability | ||||
| Sport1FarEndFaultStatus | 1.3.6.1.4.1.11606.2.24.6 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port1 Far End Fault Status | ||||
| Sport1RxLoPriorityByte | 1.3.6.1.4.1.11606.2.24.7 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Low Priority Octet Counter | ||||
| Sport1RxHiPriorityByte | 1.3.6.1.4.1.11606.2.24.8 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive High Priority Octet Counter | ||||
| Sport1UndersizePkt | 1.3.6.1.4.1.11606.2.24.9 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Undersize Packet Counter | ||||
| Sport1RxJabbers | 1.3.6.1.4.1.11606.2.24.12 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Jabbers Counter | ||||
| Sport1CRCError | 1.3.6.1.4.1.11606.2.24.14 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 CRC Error Counter | ||||
| Sport1RxPausePkts | 1.3.6.1.4.1.11606.2.24.17 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Pause Packet Counter | ||||
| Sport1Broadcast | 1.3.6.1.4.1.11606.2.24.18 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Good Broadcast Packet counter | ||||
| Sport1RxMulticast | 1.3.6.1.4.1.11606.2.24.19 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Good Multicast Packet Counter | ||||
| Sport1RxUnicast | 1.3.6.1.4.1.11606.2.24.20 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Unicast Counter | ||||
| Sport1Rx64Octets | 1.3.6.1.4.1.11606.2.24.21 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 64Octets Counter | ||||
| Sport1Rx65to127Octets | 1.3.6.1.4.1.11606.2.24.22 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 65 to 127 Octets Counter | ||||
| Sport1Rx128to255Octets | 1.3.6.1.4.1.11606.2.24.23 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 128 to 255 Octets Counter | ||||
| Sport1Rx256to511Octets | 1.3.6.1.4.1.11606.2.24.24 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 256 to 511 Octets Counter | ||||
| Sport1Rx512to1023Octets | 1.3.6.1.4.1.11606.2.24.25 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 512 to 1023 Octets Counter | ||||
| Sport1Rx1024to1522Octets | 1.3.6.1.4.1.11606.2.24.26 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive 1024 to 1522 Octets Counter | ||||
| Sport1TxLoPriorityByte | 1.3.6.1.4.1.11606.2.24.27 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Low Priority Good Octet Counter | ||||
| Sport1TxHiPriorityByte | 1.3.6.1.4.1.11606.2.24.28 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit High Priority Good Octet Counter | ||||
| Sport1PausePkts | 1.3.6.1.4.1.11606.2.24.30 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Pause Packet Counter | ||||
| Sport1TxBroadcastPkts | 1.3.6.1.4.1.11606.2.24.31 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Good Broadcast Packet Counter | ||||
| Sport1TxMulticastPkts | 1.3.6.1.4.1.11606.2.24.32 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Good Multicast Packet Counter | ||||
| Sport1TxUnicastPkts | 1.3.6.1.4.1.11606.2.24.33 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Good Unicast Packet Counter | ||||
| Sport1TxTotalCollision | 1.3.6.1.4.1.11606.2.24.35 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Total Collision Packet Counter for half-duplex only | ||||
| Sport1TxDroppedPkts | 1.3.6.1.4.1.11606.2.24.39 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Transmit Drop Packet Counter | ||||
| Sport1RxDroppedPkts | 1.3.6.1.4.1.11606.2.24.40 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port1 Receive Drop Packet Counter | ||||
| Ncpon100Port1Ctrl | 1.3.6.1.4.1.11606.2.24.45 | |||
| Sport1CtrlDiffServPriority | 1.3.6.1.4.1.11606.2.24.45.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 DiffServe Priority Control | ||||
| Sport1Ctrl802dot1pPriorityClass | 1.3.6.1.4.1.11606.2.24.45.2 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 802.1p Priority Class Enable | ||||
| Sport1CtrlPortBasedPriority | 1.3.6.1.4.1.11606.2.24.45.3 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Port Based Priority | ||||
| Sport1CtrlPriorityCtrl | 1.3.6.1.4.1.11606.2.24.45.4 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Priority Enable | ||||
| Sport1CtrlAutoNegotiation | 1.3.6.1.4.1.11606.2.24.45.5 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Auto-Negotiation Enable | ||||
| Sport1CtrlForceFullDuplex | 1.3.6.1.4.1.11606.2.24.45.6 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Force Full-duplex | ||||
| Sport1CtrlBroadcastStormProtection | 1.3.6.1.4.1.11606.2.24.45.7 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Broadcast Storm Protection | ||||
| Sport1CtrlForceFlowCtrl | 1.3.6.1.4.1.11606.2.24.45.8 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Force Flow Control | ||||
| Sport1CtrlBackPressure | 1.3.6.1.4.1.11606.2.24.45.9 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Backpressure Enable | ||||
| Sport1CtrlTxEnable | 1.3.6.1.4.1.11606.2.24.45.10 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Transmit Enable | ||||
| Sport1CtrlRxEnable | 1.3.6.1.4.1.11606.2.24.45.11 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Receive Enable | ||||
| Sport1CtrlPowerDown | 1.3.6.1.4.1.11606.2.24.45.12 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Port Powerdown | ||||
| Sport1CtrlMACLoopBackTest | 1.3.6.1.4.1.11606.2.24.45.13 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 MAC Loopback Test | ||||
| Sport1CtrlPHYLoopbackTest | 1.3.6.1.4.1.11606.2.24.45.14 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 PHY Loopback Test | ||||
| Sport1CtrlRemoteLoopbackTest | 1.3.6.1.4.1.11606.2.24.45.15 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Remote Loopback Test | ||||
| Sport1CtrlTagInsertionRemoval | 1.3.6.1.4.1.11606.2.24.45.16 | INTEGER (0..3) | RW | mandatory |
scalar · INTEGER (0..3) · read-write · mandatory Port1 Tag Insertion/Tag Removal | ||||
| Sport1CtrlPortMembership | 1.3.6.1.4.1.11606.2.24.45.17 | INTEGER (0..31) | RW | mandatory |
scalar · INTEGER (0..31) · read-write · mandatory Port1 Port Membership | ||||
| Sport1CtrlIngressVLANFiltering | 1.3.6.1.4.1.11606.2.24.45.18 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Ingress VLAN Filtering | ||||
| Sport1CtrlDiscardNon-PVIDPkt | 1.3.6.1.4.1.11606.2.24.45.19 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Discard Non-PVID Packet | ||||
| Sport1CtrlDefaultTag | 1.3.6.1.4.1.11606.2.24.45.20 | INTEGER (0..65536) | RW | mandatory |
scalar · INTEGER (0..65536) · read-write · mandatory Port1 Default Tag | ||||
| Sport1CtrlForceSpeed | 1.3.6.1.4.1.11606.2.24.45.21 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port1 Force Speed | ||||
| Ncpon100Port2 | 1.3.6.1.4.1.11606.2.25 | |||
| Sport2LinkStatus | 1.3.6.1.4.1.11606.2.25.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port2 Link Status | ||||
| Sport2MDIXStatus | 1.3.6.1.4.1.11606.2.25.2 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port2 MDI-X Status | ||||
| Sport2AutoNegotiationStatus | 1.3.6.1.4.1.11606.2.25.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port2 Auto-Negotiation Status | ||||
| Sport2LinkCapability | 1.3.6.1.4.1.11606.2.25.4 | INTEGER (0..15) | RO | mandatory |
scalar · INTEGER (0..15) · read-only · mandatory Port2 Link Capability | ||||
| Sport2FlowCtrlCapability | 1.3.6.1.4.1.11606.2.25.5 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port2 Flow Control Capability | ||||
| Sport2FarEndFaultStatus | 1.3.6.1.4.1.11606.2.25.6 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Port2 Far End Fault Status | ||||
| Sport2RxLoPriorityByte | 1.3.6.1.4.1.11606.2.25.7 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Low Priority Octet Counter | ||||
| Sport2RxHiPriorityByte | 1.3.6.1.4.1.11606.2.25.8 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive High Priority Octet Counter | ||||
| Sport2UndersizePkt | 1.3.6.1.4.1.11606.2.25.9 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Undersize Packet Counter | ||||
| Sport2RxJabbers | 1.3.6.1.4.1.11606.2.25.12 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Jabbers Counter | ||||
| Sport2CRCError | 1.3.6.1.4.1.11606.2.25.14 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 CRC Error Counter | ||||
| Sport2RxPausePkts | 1.3.6.1.4.1.11606.2.25.17 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Pause Packet Counter | ||||
| Sport2Broadcast | 1.3.6.1.4.1.11606.2.25.18 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Broadcast Good Packet Counter | ||||
| Sport2RxMulticast | 1.3.6.1.4.1.11606.2.25.19 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Multicast Good Packet Counter | ||||
| Sport2RxUnicast | 1.3.6.1.4.1.11606.2.25.20 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Unicast Counter | ||||
| Sport2Rx64Octets | 1.3.6.1.4.1.11606.2.25.21 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 64 Octets Counter | ||||
| Sport2Rx65to127Octets | 1.3.6.1.4.1.11606.2.25.22 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 65 to 127 Octets Counter | ||||
| Sport2Rx128to255Octets | 1.3.6.1.4.1.11606.2.25.23 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 128 to 255 Octets Counter | ||||
| Sport2Rx256to511Octets | 1.3.6.1.4.1.11606.2.25.24 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 256 to 511 Octets Counter | ||||
| Sport2Rx512to1023Octets | 1.3.6.1.4.1.11606.2.25.25 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 512 to 1023 Octets Counter | ||||
| Sport2Rx1024to1522Octets | 1.3.6.1.4.1.11606.2.25.26 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive 1024 to 1522 Octets Counter | ||||
| Sport2TxLoPriorityByte | 1.3.6.1.4.1.11606.2.25.27 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Low Priority Packet Counter | ||||
| Sport2TxHiPriorityByte | 1.3.6.1.4.1.11606.2.25.28 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit High Priority Packet Counter | ||||
| Sport2PausePkts | 1.3.6.1.4.1.11606.2.25.30 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Pause Packet Counter | ||||
| Sport2TxBroadcastPkts | 1.3.6.1.4.1.11606.2.25.31 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Broadcast Packet Counter | ||||
| Sport2TxMulticastPkts | 1.3.6.1.4.1.11606.2.25.32 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Multicast Packet Counter | ||||
| Sport2TxUnicastPkts | 1.3.6.1.4.1.11606.2.25.33 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Unicast Packet Counter | ||||
| Sport2TxTotalCollision | 1.3.6.1.4.1.11606.2.25.35 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Total Collision Packet Counter | ||||
| Sport2TxDroppedPkts | 1.3.6.1.4.1.11606.2.25.39 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Transmit Dropped Packet Counter | ||||
| Sport2RxDroppedPkts | 1.3.6.1.4.1.11606.2.25.40 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Port2 Receive Dropped Packet Counter | ||||
| Nport2Ctrl | 1.3.6.1.4.1.11606.2.25.45 | |||
| Sport2CtrlDiffServPriority | 1.3.6.1.4.1.11606.2.25.45.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 DiffServe Priority Control | ||||
| Sport2Ctrl802dot1pPriorityClass | 1.3.6.1.4.1.11606.2.25.45.2 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 802.1p Priority Class Enable | ||||
| Sport2CtrlPortBasedPriority | 1.3.6.1.4.1.11606.2.25.45.3 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 802.1p Priority Class Enable | ||||
| Sport2CtrlPriorityCtrl | 1.3.6.1.4.1.11606.2.25.45.4 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Priority Enable | ||||
| Sport2CtrlAutoNegotiation | 1.3.6.1.4.1.11606.2.25.45.5 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Auto-Negotiation Enable | ||||
| Sport2CtrlForcedFullDuplex | 1.3.6.1.4.1.11606.2.25.45.6 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Force Full-duplex | ||||
| Sport2CtrlBroadcastStormProtection | 1.3.6.1.4.1.11606.2.25.45.7 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Broadcast Storm Protection Enable | ||||
| Sport2CtrlForceFlowCtrl | 1.3.6.1.4.1.11606.2.25.45.8 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Force Flow Control | ||||
| Sport2CtrlBackPressure | 1.3.6.1.4.1.11606.2.25.45.9 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Back Pressure Enable | ||||
| Sport2CtrlTxEnable | 1.3.6.1.4.1.11606.2.25.45.10 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Transmit Enable | ||||
| Sport2CtrlRxEnable | 1.3.6.1.4.1.11606.2.25.45.11 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Receive Enable | ||||
| Sport2CtrlPowerDown | 1.3.6.1.4.1.11606.2.25.45.12 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Powerdown | ||||
| Sport2CtrlMACLoopBackTest | 1.3.6.1.4.1.11606.2.25.45.13 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 MAC Loopback Test | ||||
| Sport2CtrlPHYLoopbackTest | 1.3.6.1.4.1.11606.2.25.45.14 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 PHY Loopback Test | ||||
| Sport2CtrlRemoteLoopbackTest | 1.3.6.1.4.1.11606.2.25.45.15 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Remote Loopback Test | ||||
| Sport2CtrlTagInsertionRemoval | 1.3.6.1.4.1.11606.2.25.45.16 | INTEGER (0..3) | RW | mandatory |
scalar · INTEGER (0..3) · read-write · mandatory Port2 Tag Insertion/Tag Removal | ||||
| Sport2CtrlPortMembership | 1.3.6.1.4.1.11606.2.25.45.17 | INTEGER (0..31) | RW | mandatory |
scalar · INTEGER (0..31) · read-write · mandatory Port2 Port Membership | ||||
| Sport2CtrlIngressVLANFiltering | 1.3.6.1.4.1.11606.2.25.45.18 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Ingress VLAN Filtering | ||||
| Sport2CtrlDiscardNon-PVIDPkt | 1.3.6.1.4.1.11606.2.25.45.19 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Discard Non-PVID Packet | ||||
| Sport2CtrlDefaultTag | 1.3.6.1.4.1.11606.2.25.45.20 | INTEGER (0..65536) | RW | mandatory |
scalar · INTEGER (0..65536) · read-write · mandatory Port2 Default Tag | ||||
| Sport2CtrlForceSpeed | 1.3.6.1.4.1.11606.2.25.45.21 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Port2 Force Speed | ||||
| Ncpon100PriUplink | 1.3.6.1.4.1.11606.2.26 | |||
| SpriUplinkLinkStatus | 1.3.6.1.4.1.11606.2.26.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Uplink Link Status | ||||
| NpriUplinkPortCtrl | 1.3.6.1.4.1.11606.2.26.45 | |||
| SpriUplinkLinkRemoteLoopbackTest | 1.3.6.1.4.1.11606.2.26.45.15 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory Primary uplink Link Remote loopback test | ||||
| SpriUplinkTxLoPriorityRateCtrl | 1.3.6.1.4.1.11606.2.26.45.22 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory Primary Uplink Transmit Low Priority Rate Control | ||||
| SpriUplinkRxLoPriorityRateCtrl | 1.3.6.1.4.1.11606.2.26.45.23 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory Primary Uplink Receive Low Priority Rate Control | ||||
| SpriUplinkTxDiffPriorityRateCtrl | 1.3.6.1.4.1.11606.2.26.45.24 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory Primary Uplink Transmit Differential Priority Rate Control | ||||
| Nodnrt100 | 1.3.6.1.4.1.11606.3 | |||
| Noslam8g | 1.3.6.1.4.1.11606.4 | |||
| Noslam8g-Global | 1.3.6.1.4.1.11606.4.1 | |||
| Noslam8g-globalCtrl | 1.3.6.1.4.1.11606.4.1.1 | |||
| Soslam8gSrcMACAddr | 1.3.6.1.4.1.11606.4.1.1.1 | Opaque (SIZE (6)) | RW | mandatory |
scalar · Opaque (SIZE (6)) · read-write · mandatory OSLAM-8G Source MAC address
===========================
48bit Source address MAC address for pause control frame.
NOTE: First bit of 2nd octet is as followed:
This bit used to have all ports transmit the same or different
source addresses in full-duplex Pause frames.
0 - All ports transmit the same Static Address (SA)
1 - Each port uses a different SA where bits 4:47 of
the 'sourceMACAddress' are the same, but bits 3:0 are the
port number (Port 0 = 0, Port1 = 1, Port 2 = 2, etc.) | ||||
| Soslam8gSchedulingMode | 1.3.6.1.4.1.11606.4.1.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Scheduling Mode ========================= 1 - Use an 8,4,2,1 weighted fair queuing scheme 2 - Us a strict priority scheme
| ||||
| Soslam8gMaxFrameSize | 1.3.6.1.4.1.11606.4.1.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Maximum Frame Size allowed. =========================== The Ingress block discards all frames less than 64 bytes in size. It also discards all frames greater than a certain size (regardless of whether or not the frame is iEEE802.3ac tagged) as follows: 1 - Max size is 1522 for IEEE tagged frames, 1518 for untagged frames. 2 - Max size is 1632
| ||||
| Soslam8gCoreTag | 1.3.6.1.4.1.11606.4.1.1.4 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory OSLAM-8G Core Tag Type
======================
Core Tag Ether Type. This EtherType is added to frames that egress the
switch as Double Tagged frames. It is also the EtherType expected during
Ingress to determine if a frame is Tagged or not on ports configured in
oslam8gPortEgressMode as follows:
For Ingress:
===========
oslam8gUseCoreTag= 1, oslam8gDoubleTag = 1, TagType = 0x8100
oslam8gUseCoreTag= 1, oslam8gDoubleTag = 2, TagType = 0x8100
oslam8gUseCoreTag= 2, oslam8gDoubleTag = 1, TagType = oslam8gCoreTagType
oslam8gUseCoreTag= 2, oslam8gDoubleTag = 2, 1st TagType = oslam8gCoreTagType then
2nd TagType in the frame = 0x8100
For Egress:
===========
Normal Add a Tag (standard IEEE rule) Added Tag Type = 0x8100
Always Add a Tag (Egress DoubleTag) Added Tag Type = oslam8gCoreTagType | ||||
| Soslam8gUseDoubleTagData | 1.3.6.1.4.1.11606.4.1.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Use Double Tag Data ============================ Used to determine if Double Tag data is removed from a Double Tag frame is used or ignored when making switching decisions on the frame. 1 - Ignore removed Tag data 2 - Use removed Tag data This OID have not effect if hte port's oslam8gPortDoubleTag is set to 1
| ||||
| Noslam8g-globalStatus | 1.3.6.1.4.1.11606.4.1.2 | |||
| Soslam8gSerialNumber | 1.3.6.1.4.1.11606.4.1.2.1 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory OSLAM-8G Serial Number | ||||
| Soslam8gMACAddress | 1.3.6.1.4.1.11606.4.1.2.2 | OCTET STRING (SIZE (12)) | RO | mandatory |
scalar · OCTET STRING (SIZE (12)) · read-only · mandatory OSLAM-8G SNMP MAC Address | ||||
| Soslam8gDiagnosticMsg | 1.3.6.1.4.1.11606.4.1.2.3 | DisplayString (SIZE (0..63)) | RO | mandatory |
scalar · DisplayString (SIZE (0..63)) · read-only · mandatory OSLAM-8G Diagnostic Message | ||||
| Noslam8g-VTU | 1.3.6.1.4.1.11606.4.1.3 | |||
| SvtuOperation | 1.3.6.1.4.1.11606.4.1.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory VLAN Table Unit Table Operation
===============================
Support the following VTU operation.
0, 2 - No Operation
1 - Flush All Entries
3 - Load(1) or Purge(2) an Entry
4 - Get Next(3)
5,6 - Reserve
7 - Get/Clear Violation Data
NOTE:
(1) - An Entry is Loaded when the 'vtuValid' is set to a one.
Load is the only 'vtuOperation' that uses the 'vtuDBNum' field
and it uses it as data to be loaded along with the desired 'vtuVID'.
(2) - An Entry is Purged when the 'vtuValid' is cleared to a zero.
(3) - A Get Next operation finds the next higher 'vtuVID' curretnly in
the database. The vtuVID value is used as the VID to start from.
To find the lowest VID set the vtuVID field to ones.
When the operation is done the vtuVID field contains the next
higher VID currently active in the database. To find the next
VID simply issue the Get Next opcode again. If the vtuVID field
is returned set to a one's with the vtuValid cleared to zero,
no higher VID's were found. To Search for a particular VID,
perform a Get Next operation using a vtuVID field with a value
one less than the one being searched for.
| ||||
| SvtuDBNum | 1.3.6.1.4.1.11606.4.1.3.2 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory VTU MAC Address Database Number =============================== On all vtuOperation except for Get Violation Data, this field is used to separate MAC address dtabases by a frame's VID. If multiple address databases are not being used, theses bits must remain zero. If multiple addresss are not being used, theses bits must remain zero. If multiple address databases are being used, these bits are used to get the desired database number that is associated with VID value on Load operations (or used to read the currently assigned vtuDBNum on Get Next operations). | ||||
| SvtuMemberViolation | 1.3.6.1.4.1.11606.4.1.3.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory VTU Member Violation ================== Source Member Violation. On Get/Clear Violation Data vtuOperation, this value is returned set to a two(2) if the Violation being serviced is due to an 802.1Q Member Violation. A member Violation occurs when an 802.1Q enabled ingress port accesses the VTU with a VID that is cotnained in the VTU but whose Mebership list does not include this Ingress port. Only the first vtuFullViolation, vtuMemberViolation, vtuMissViolation is saved per port until cleared.
| ||||
| SvtuMissViolation | 1.3.6.1.4.1.11606.4.1.3.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory VTU Miss Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to 802.1Q Miss Violation. A Miss Violation occurs when an 802.1Q enabled Ingress port accesses the VTU with a VID that is contained in the VTU. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared.
| ||||
| SvtuValid | 1.3.6.1.4.1.11606.4.1.3.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory VTU Entry Valid status.
=======================
At the end of Get/Next operations
1 - If VID is all ones, it indicates the end of the VID list was reached
with no new valid entries.
2 - Indicates the VID value below is valid.
NOTE: On Load or Purge operations, this bit indicates the desired operation
of a Load (when set to a one) or a Purge (when cleared to a zero).
| ||||
| SvtuVID | 1.3.6.1.4.1.11606.4.1.3.6 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory VLAN Identifier =============== This VID is used in all the vtuOperation commands (except Get/Clear Violation Data) and it is the VID that is associated with the vtuData or the vtuVID that caused the VTU Violation. Theses indicate the VID number that is associated with the MemberTag in the vtuData, 802.1s PortState, Priority and its override. | ||||
| SvtuData | 1.3.6.1.4.1.11606.4.1.3.7 | Opaque (SIZE (6)) | RW | mandatory |
scalar · Opaque (SIZE (6)) · read-write · mandatory VLAN table data
Entry Format as follow:
======================
BYTE#: 5 4 3 2 1 0
Frame: [0:P10][P9:P8][P7:P6][P5:P4][P3:P2][P1:P0]
Px: Port control
Size: 4bits total
Format: [PortState][PortMemberTag]
PortState: The upper two bits of each port's VTU data is called 802.1s PortState.
These bits are used to support 802.1s per VLAN spanning tree as follows:
00 - 802.1s Disabled. User non-VLAN Port states (in Port control 'portState')
01 - Blocking/Listening Port State for this port for frames with this VID
10 - Learning Port State for this port for frames with this VID
11 - Forwarding Port State for this port for frames with this VID
NOTE: These 802.1s PortState bits take precedence over the port's 'portState'
in port control unless the port's 'portState' is Disabled
(which prevents all frames from flowing).
MemberTag: Size: 2bits
The lower two bits of each port's VTU data is called MemberTag.
These bits are used to indicate which ports are members of
the VLAN and if these VLANs frames should be tagged or
untagged, or unmodified when exiting the port as follows:
00 - Port is a member of this VLAN and frames are to egress unmodified.
01 - Port is a member of this VLAN and frames are to egress Untagged.
10 - Port is a member of this VLAN and frames are to egress Tagged.
11 - Port is not a member of this VLAN | ||||
| SvtuVIDPRI | 1.3.6.1.4.1.11606.4.1.3.8 | INTEGER (0..7) | RW | mandatory |
scalar · INTEGER (0..7) · read-write · mandatory VID Priority ============ These bits are used to override the priority on any frames associated with this VID value, if the 'vtuVIDPRIOverride' is set to one. | ||||
| SvtuVIDPRIOverride | 1.3.6.1.4.1.11606.4.1.3.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory VID Priority Override
=====================
1 - No priority override.
2 - The vtuVIDPRI are used to override the priority on any frames associated
with this VID as long as the port's 'portVTUPriOverride' is set.
| ||||
| Noslam8g-ATU | 1.3.6.1.4.1.11606.4.1.4 | |||
| SatuOperation | 1.3.6.1.4.1.11606.4.1.4.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Address Translation Unit (ATU) Opcode: ====================================== 1 - Flush All Entries 2 - Flush all Non-Static Entries 3 - Load or Purge an Entry in a particular atuDBNum Database 4 - Get Next from a particular atuDBNum Database 5 - Flush all Entries in a particular atuDBNum Database 6 - Flush all Non-Static Entries in a particular atuDBNum Database 7 - Get/Clear Violation Data. 8 - No operation
| ||||
| SatuDBNum | 1.3.6.1.4.1.11606.4.1.4.2 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory ATU MAC Address Database Number (DBNum) ======================================= If multiple address databases are not being used theses bits must remain zero. If multiple address databases are being used theses are used to set the desired address database number that is being used on the Database supported commands (atuOperation 0x03, 0x04, 0x05 and 0x06). On Get/Clear Violation Data atuOperation these bits return the atuDBNum value associated with the ATU violation that was just serviced. | ||||
| SatuMemberViolation | 1.3.6.1.4.1.11606.4.1.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory ATU Member Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Address Look-up that resulted in a Hit but where the 'atuState' and 'atuPortVec' bits does not contain the frame's Ingress port bit set to a two(2) (i.e. a station moved occurred). This violation can be masked on a per port basis by setting the port's ignoreWrongData bit. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared.
| ||||
| SatuMissViolation | 1.3.6.1.4.1.11606.4.1.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory ATU Miss Violation ================== On Get/CLear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Address Look-up that resulted in a Miss on ports that are locked (i.e., CPU directed learning is enabled on the port). Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared.
| ||||
| SatuFullViolation | 1.3.6.1.4.1.11606.4.1.4.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory ATU Full Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Load operation or automatic learn that could not store the desired entry. This only occurs if all available locations for the desired address contain other MAC addresses that are loaded Static. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared.
| ||||
| SatuAgeTime | 1.3.6.1.4.1.11606.4.1.4.6 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory ATU Age Time ============ These bits determine the time that each ATU Entry remains valid in the database, since its last access as a source address, before being purged. The value in this register times 15 is the age time in seconds. For example: The default value of 0x14 is 20 decimal. 20x15 = 300 seconds or 5 minutes. If the atuAgeTime is 0xFF or 3825 seconds or almost 64 minutes. if the atuAgeTime is set to 0 the Aging function is disabled and all learned addresses will remain in the database forever. | ||||
| SatuTrunkMode | 1.3.6.1.4.1.11606.4.1.4.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory TRUNK - Trunk Mappped Address ============================= 1 - The 'atuPortVec' is the port vector assigned to this address. 2 - The data bits [7:4] of 'atuPortVec' is the Trunk ID assigned to this address. 'atuPortVec' bits [10:4] must be written as zero when this value is zet to a two(2).
| ||||
| SatuPortVecorTrunkID | 1.3.6.1.4.1.11606.4.1.4.8 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory Port Vector/Trunk ID ==================== If the atuTrunk is zero, theses bits are used as the input Port Vector for ATU Load operations and it's the resulting Trunk ID for ATU load operations and it's the resulting Trunk ID from ATU GetNext operations. | ||||
| SatuEntryState | 1.3.6.1.4.1.11606.4.1.4.9 | INTEGER (0..15) | RW | mandatory |
scalar · INTEGER (0..15) · read-write · mandatory ATU Entry State =============== Used as the Entry State for ATU Load/Purge or Flush/Move operations and it is the resulting Entry State from ATU Get Next operations (GetNext is the only ATU operation supported in the devices). If theses equal to 0x0 then the atuOperation is a Purge or a Flush. If theses bits are not 0x0 then the atuOperation is a Load or a Move (a move atuOperation requires these bits to be 0x0F). On Get/Clear Violation Data atuOperation, theses bits return the Source Port ID(SPID) associated with the ATU violation that was just serviced. If SPID = 0xF the source of the violation was the CPU's register interface (i.e. the ATU was full during a CPU Load operation). | ||||
| SatuMACEntry | 1.3.6.1.4.1.11606.4.1.4.10 | Opaque (SIZE (6)) | RW | mandatory |
scalar · Opaque (SIZE (6)) · read-write · mandatory ATU MAC Address Entry: ====================== Byte pattern as follow: Opaque data Location: 5 4 3 2 1 0 MAC Byte Location : [5][4][3][2][1][0] | ||||
| Noslam8g-Port | 1.3.6.1.4.1.11606.4.2 | |||
| Soslam8gPortSelect | 1.3.6.1.4.1.11606.4.2.1 | INTEGER | RW | mandatory |
| Noslam8g-portCtrl | 1.3.6.1.4.1.11606.4.2.2 | |||
| Soslam8gPortForceFlowCtrl | 1.3.6.1.4.1.11606.4.2.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Force Flow Control Setting ======================================== 1 - Force No Flow Control 2 - Normal detection occurs 3 - Force Flow Control
| ||||
| Soslam8gPortForceLink | 1.3.6.1.4.1.11606.4.2.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Force Link ======================== 1 - Force to bring link down 2 - Normal link detection occurs 3 - Force to bring link up
| ||||
| Soslam8gPortForceDuplex | 1.3.6.1.4.1.11606.4.2.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Force Duplex Control ================================== 1 - Force Half-Duplex 2 - Normal duplex detection occurs. 3 - Force Full-Duplex
| ||||
| Soslam8gPortForceSpeed | 1.3.6.1.4.1.11606.4.2.2.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Force Speed ========================= 1 - 10Mbps 2 - 100Mbps 3 - 1000Mbps 4 - Speed is not forced. Normal speed detection occurs.
| ||||
| Soslam8gPortPortState | 1.3.6.1.4.1.11606.4.2.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port's Port State
===========================
This OID is used to manage a port to determine what kind of frames,
if any, are allowed to enter or leave a port for simple bridge loop
detection or 802.1D Spanning Tree. This OID value can be change at
any time without disrupting frames currently in transmit.
1 - Disabled.
The port is disabled and it will not receive or transmit any frames.
The QC returns any pre-allocated ingress queue buffers when the
port is in this mode.
2 - Blocking/Listening.
OSLAM-8G examines all frames without learning any SAs, and discards
all frames.
3 - Learning.
OSLAM-8G will examine all frames, learning all SA address (except those
from MGMT frames), and still discard all but MGMT frames. It will allow
MGMT frames only to exit the port.
4 - Forwarding.
OSLAM-8G examines all frames, learning SAs from all good frames (except
those from MGMT frames), and receives and transmits all frames as a normal switch.
| ||||
| Soslam8gPortFwdUnknown | 1.3.6.1.4.1.11606.4.2.2.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Forward Unknown
=============================
1 - Unicast frames with unknown DAs will not egress out of this port.
2 - Normal operation occurs and unicast frames with unknown DA addresses
are allowed to egress out of this port (assuming the VLAN settings
allow the frame to egress this port too).
| ||||
| Soslam8gPortDefFwd | 1.3.6.1.4.1.11606.4.2.2.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Default Forward
=============================
1 - Multicast frames with unknown DAs do not egress from this port.
2 - Normal switch operation occurs and multicast frames with unknown
DA addresses are allowed to egress out this port (assuming the
VLAN settings allow the frame to egress this port too).
| ||||
| Soslam8gPortUseIPForPriority | 1.3.6.1.4.1.11606.4.2.2.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Use IP for Priority
=================================
Use IPv4 TOS and/or DiffServ fields and/or IPv6 Traffic Class fields,
if present, for priority data.
1 - Ignore IPv4 and IPv6 priority fields.
2 - Use IPv4 fields if the frame is IPv4 and use IPv6 fields
if the frame is IPv6 for priority data.
| ||||
| Soslam8gPortUseCoreTag | 1.3.6.1.4.1.11606.4.2.2.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Use Core Tag
==========================
Refer to 'oslam8gCoreTag'
1 - Ingressing frames are considered tagged if the 16-bits
following the frame's source Address are 0x8100.
2 - Ingressing frames are considered tagged if the 16-bits
following the frame's source Address are equal to
'oslam8gCoreTagType'
NOTE:
If a frame is Double Tagged and the first tag is removed
(oslam8gPortDoubleTag) by matching the EtherType define by
this bit, the resulting frame will be considered tagged
only if the next 16 bits in the frame equal to 0x8100
(that is, the oslam8gCoreTagType is not used after the
first tag is removed)
| ||||
| Soslam8gPortDoubleTag | 1.3.6.1.4.1.11606.4.2.2.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Double Tag
========================
Ingress Double Tag
2 - The ingressing frames are examined to see if they contain 802.3ac
tag with the IEEE standard EtherType of 0x8100 or if they contain
a tag with an EtherType defined in oslam8gCoreTag. The oslam8gCoreTag
will be used if this port's oslam8gPortUseCoreTag is used. If the
frames do contain the expected tag, the tag is removed (and the
CRC is recomputed).
Essentially, untagged frames remain untagged, single tagged frames
become untagged and double tagged frames become single tagged.
These now single tagged frames will be considered tagged only if
its EtherType value is 0x8100 no matter what the EtherType value
was found on the removed tag. No padding is performed so a tagged
frame must be at least 68bytes in size or it will be discarded.
1 - Tagged frames are not modified when received.
The Tag data that is removed from the frame can be ignored
(i.e., the frame is treated as if the removed tag never existed)
or the removed Tag data can be used for switching and priority
decisions (i.e., the removed Tag's VID and PRI bits are internally
assigned to the frame). The action that is taken is controlled by
the oslam8gUseDoubleTagData
| ||||
| Noslam8g-portRateCtrl | 1.3.6.1.4.1.11606.4.2.3 | |||
| Soslam8gPortEgressRate | 1.3.6.1.4.1.11606.4.2.3.1 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory OSLAM-8G Port Egress Rate Limit ================================ Modify this port's effective transmission rate. This support 62kbps to 256Mbps. Formula to limit the Egress data rate: EgressRate = 8 bits/ (32ns * Egress Rate bits/sec) Where, => Egress Rate is in bits per second. For example: ============ For 256Kbps rate the value of this oslam8gPortEgressRate should be: = 8/(32ns * 256Kbps) = 976 The value to be programmed for this OID is 976. 976 is actually equated to 256.14Kbps | ||||
| Soslam8gPortIngressLimitMode | 1.3.6.1.4.1.11606.4.2.3.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Ingress Limit Mode ================================ Determine what kinds of frames are limited and counted against Ingress limiting. 1 - Limit and count all frames. 2 - Limit and count Broadcast, Multicast and flooded unicast frames. 3 - Limit and count Broadcast and Multicast frames only. 4 - Limit and count Broadcast frames only. NOTE: If a frame is not limited by the above setting, its size is not counted against the limit for the other frames.
| ||||
| Soslam8gPortIngressPri3Rate | 1.3.6.1.4.1.11606.4.2.3.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Priority 3 Rate Control
=====================================
Priority 3 frames are discarded after the ingress rate selected
below is reached or exceeded:
1 - Use the same rate as oslam8gPortIngressPri2Rate
2 - Use twice the rate as oslam8gPortIngressPri2Rate
(but no faster than the port's speed)
| ||||
| Soslam8gPortIngressPri2Rate | 1.3.6.1.4.1.11606.4.2.3.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Priority 2 Rate Control
=====================================
Priority 2 frames are discarded after the ingress rate selected
below is reached or exceeded:
1 - Use the same rate as oslam8gPortIngressPri1Rate
2 - Use twice the rate as oslam8gPortIngressPri1Rate
(but no faster than the port's speed)
| ||||
| Soslam8gPortIngressPri1Rate | 1.3.6.1.4.1.11606.4.2.3.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Priority 1 Rate Control
=====================================
Priority 1 frames are discarded after the ingress rate selected
below is reached or exceeded:
1 - Use the same rate as oslam8gPortIngressPri0Rate
2 - Use twice the rate as oslam8gPortIngressPri0Rate
(but no faster than the port's speed)
| ||||
| Soslam8gPortIngressPri0Rate | 1.3.6.1.4.1.11606.4.2.3.6 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory OSLAM-8G Port Priority 0 Rate Control ===================================== Priority 1 frames are discarded after the ingress rate selected below is reached or exceeded: OSLAM-8G use the following formula to calculate rate limiting: Pri0Rate = 8 bits/ (32ns * Ingress Rate bits/sec) Where, => Ingress Rate is in bits per second. For example: ============ For 128Kbps rate the value of this oslam8gPortEgressRate should be: = 8/(32ns * 128Kbps) = 1953 | ||||
| Noslam8g-PortVLAN | 1.3.6.1.4.1.11606.4.2.4 | |||
| Soslam8gPortUseTag | 1.3.6.1.4.1.11606.4.2.4.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Use Tag
=====================
Use IEEE Tags. Use IEEE 802.1p Traffic Class field for priority data if
the frame is an IEEE 802.3ac tagged frame.
1 - Ignore IEEE 802.1p tag fields even it the frame is tagged.
In this mode, tagged frames that enter this port and egress the
OSLAM-8G tagged are re-tagged with this port's default priority bits,
if no other priorities are determined fro the frame (i.e., the frame's
IP priority and/or other priority overrides). This works as a Force
Default Priority function on tagged frames.
2 - Use IEEE 802.1p tag Traffic Class for priority data if the frame is tagged.
| ||||
| Soslam8gPortPortMembership | 1.3.6.1.4.1.11606.4.2.4.2 | INTEGER (0..2047) | RW | mandatory |
scalar · INTEGER (0..2047) · read-write · mandatory OSLAM-8G Port's Port Membership =============================== Port based VLAN Table. The bits in this value are used to restrict which output ports this input port can send frames to. This value are used for all frames even if 802.1Q is enabled on this port or if ProtectedPort is enabled on this port. These bits restrict where a port can send frames (unless a oslam8gPortVLANTunnel frame is being received. => To send frames to Port 0, bit 0 of this register must be a one. => To send frames to Port 1, bit 1 of this register must be a one. etc. | ||||
| Soslam8gPortDefPri | 1.3.6.1.4.1.11606.4.2.4.3 | INTEGER (0..7) | RW | mandatory |
scalar · INTEGER (0..7) · read-write · mandatory OSLAM-8G Port Default Priority ============================== Used as the default ingress priority to use when no other priority information is available (neither is the frame IEEE Tagged, nor is it an IPv4 nor an IPv6 frame - or the frame is a priority type that is currently disabled (see oslam8gPortUseIPPriority and oslam8gPortUseTag) and no other priority overrides are active on this frame. The default priority are remapped by the oslam8gPortPriRemap prior being used. | ||||
| Soslam8gPort802dot1QMode | 1.3.6.1.4.1.11606.4.2.4.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port 802.1Q Mode
=========================
IEEE 802.1Q Mode for this port. These bits determine if 802.1Q based
VLANs are used along with port based VLANs for this Ingress port.
If also determines the action to be taken if an 802.1Q VLAN Violation
is detected.
1 - 802.1Q disabled.
Use Port Based VLANs only. The oslam8gPortMembership and
oslam8gPortDefVID assigned to the frame during ingress
determine which Egress ports this Ingress is allowed to
switch frames to for all frames.
2 - Fallback.
Enable 802.1Q for this Ingress port. Do not discard Ingress
Membership violations and use the oslam8gPortMembership
if the frame's VID is not contained in the VTU.
3 - Check.
Enabled 802.1Q for this Ingress port. Do not discard Ingress
Membership violation but discard the frame if its VID is not
contained in the VTU.
4 - Secure.
Enabled 802.1Q for this Ingress port. Do not discard Ingress
Membership violations and discard frames whose VID is not
contained in the VTU.
| ||||
| Soslam8gPortTagUntagDiscard | 1.3.6.1.4.1.11606.4.2.4.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Tagged/Untagged Discard Mode
==========================================
1 - No discard of Frames
2 - Only Discard Untagged Frames.
All non-MGMT frames that are processed as untagged are discarded
as they entering this switch port. This test is performed after
Ingress Double Tag removal (if enabled).
3 - Only Discard Tagged Frames.
All non-MGMT frames that are processed as tagged are discarded
as they entering this switch port.
This test is performed after Ingress Double Tag removal (if enabled).
Priority only tagged frames (with a VID of 0x00) are considered tagged.
4 - Both Discard Tagged and Untagged frames.
| ||||
| Soslam8gPortDefVID | 1.3.6.1.4.1.11606.4.2.4.6 | INTEGER (0..4095) | RW | mandatory |
scalar · INTEGER (0..4095) · read-write · mandatory OSLAM-8G Port Default VLAN Identifier ===================================== When 802.1Q is enabled on this port this value is used as the IEEE Tagged VID added to untagged or priority tagged frames during egress that ingressed from this port. It is also used as a tagged frame's VID if the frame's VID was 0 (i.e., it is a priority tagged frame) or if the port's oslam8gPortForceDefVID is set to one. When 802.1Q is disabled on this port, this value field is assigned to all frames entering the port (if are tagged or untagged). This assignment is used internal to the switch, so only Port Based VLANs can be supported. | ||||
| Soslam8gPortVLANTunnel | 1.3.6.1.4.1.11606.4.2.4.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port VLAN Tunnel
=========================
1 - The port based VLANs defined in oslam8gPortPortMembership,
802.1Q VLANs defined in the oslam8g-802dot1QVLAN (if 802.1Q
is enabled) and oslam8gTrunkMask are enforced for ALL frames.
2 - The port based oslam8gPortPortMembership, 802.1Q VLAN membership
masking and oslam8gTrunkMask is bypassed for any frame entering
this port with a DA that is currently 'static' in the oslam8g-atu.
This applies to unicast as well as multicast frames.
| ||||
| Soslam8gPortVTUPriOverride | 1.3.6.1.4.1.11606.4.2.4.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port VTU Priority Override
===================================
1 - Normal frame priority processing occurs.
2 - The VTU priority overrides can occur on this port.
A VTU priority override occurs when the determined
VID of a frame resuls in a VID whose oslam8gVTUVIDPRIOverride
in the VTU VLAN database is set. When this occurs the VIDPRI
value assigned to the frame's VID is used to overrite the frames
previously determined priority. If the frame egresses tagged the
priority in the frame will be this new VIDPRI value. When used
the upper two bits of the VIDPRI priority determine the Egress
Queue the frame is switched into. THE VTU Priority Override has
higher priority than the port's Default Priority and the frame's
IEEE and/or IP priorities. The priority determined by the frame's
VID can be overridden, however, by the frame's SA and/or DA prority
Overrides.
| ||||
| Soslam8gPortForceDefVID | 1.3.6.1.4.1.11606.4.2.4.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Force Default VID
===============================
For to use Default VID. When 802.1Q is enabled on this port and
1 - All IEEE 802.3ac Tagged frames with a non-zero VID used the frame's
VID unmodified.
2 - All ingress frames with IEEE 802.3ac Tags have their VID
ignored and the port's oslam8gPortDefaultVID is used and replaced into
the frame instead.
When 802.1Q is disabled on this port, this bit has no effect.
| ||||
| Soslam8gEgressMode | 1.3.6.1.4.1.11606.4.2.4.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory OSLAM-8G Port Egress Mode
=========================
The first three Egrress Modes are used as the default Egress mode for
frames whose VID is not valid in the oslam8g-802dot1QVLAN or if 802.1Q
is disabled on the port. The fourth Egress Mode is applied to all
frames all the time (if selected) even if 802.1Q is enabled on the port.
1 - Default to Normal mode. Frames are transmitted unmodified.
2 - Default to Transmit all frames Untagged. Remove the tag from
any tagged frame.
3 - Default to Transmit all frames Tagged. Add a tag to any untagged frame.
4 - Always add a Tag (or Egress Double Tag). This setting is not a default
setting. It ignores the MemberTag in vtuData of oslam8g-802dot1QVLAN
for this port. The EtherType used for these inserted tags come from
oslam8gCoreTag.
| ||||
| Soslam8gPortPriRemap | 1.3.6.1.4.1.11606.4.2.4.11 | Opaque (SIZE (4)) | RW | mandatory |
scalar · Opaque (SIZE (4)) · read-write · mandatory OSLAM-8G Port IEEE Priority Remapping
====================================
Byte#: 3 2 1 0
Format: [TagRemap7:TagRemap6][TagRemap5:TagRemap4][TagRemap3:TagRemap2][TagRemap1:TagRemap0]
TagRemap0: Tag Remap 0.
All IEEE tagged frames with a priority of 0 get this value as the frame's
new priority inside the switch. If a tagged frame egresses the switch tagged,
this new priority is written to the frame's tag.
TagRemap1: Tag Remap 1.
All IEEE tagged frames with a priority of 1 get this value as the frame's
new priority inside the switch. If a tagged frame egresses the switch tagged,
this new priority is written to the frame's tag.
TagRemapX: Tag Remap X.
All IEEE tagged frames with a priority of X get this value as the frame's
new priority inside the switch. If a tagged frame egresses the switch tagged,
this new priority is written to the frame's tag. | ||||
| Noslam8g-portStatus | 1.3.6.1.4.1.11606.4.2.5 | |||
| Soslam8gPortLinkStatus | 1.3.6.1.4.1.11606.4.2.5.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Link Status: ============ This indicates the link status of the selected port 1 - Link is down 2 - Link is Up
| ||||
| Soslam8gPortDuplexStatus | 1.3.6.1.4.1.11606.4.2.5.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Duplex Mode: ============ Valid if link status is up. 1 - Half-Duplex 2 - Full-Duplex
| ||||
| Soslam8gPortSpeedStatus | 1.3.6.1.4.1.11606.4.2.5.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Speed Mode: =========== Valid if link status is up. 1 - 10MBps 2 - 100MBps 3 - 1000MBps 4 - Reserved for future used
| ||||
| Noslam8g-portRMON | 1.3.6.1.4.1.11606.4.2.6 | |||
| Noslam8gPortRMONIngress | 1.3.6.1.4.1.11606.4.2.6.1 | |||
| Soslam8gPortInGoodOctetsLo | 1.3.6.1.4.1.11606.4.2.6.1.1 | Counter | RO | mandatory |
| Soslam8gPortInGoodOctetsHi | 1.3.6.1.4.1.11606.4.2.6.1.2 | Counter | RO | mandatory |
| Soslam8gPortInBadOctets | 1.3.6.1.4.1.11606.4.2.6.1.3 | Counter | RO | mandatory |
| Soslam8gPortInUnicast | 1.3.6.1.4.1.11606.4.2.6.1.4 | Counter | RO | mandatory |
| Soslam8gPortInBroadcasts | 1.3.6.1.4.1.11606.4.2.6.1.5 | Counter | RO | mandatory |
| Soslam8gPortInMulticasts | 1.3.6.1.4.1.11606.4.2.6.1.6 | Counter | RO | mandatory |
| Soslam8gPortInPause | 1.3.6.1.4.1.11606.4.2.6.1.7 | Counter | RO | mandatory |
| Soslam8gPortInUndersize | 1.3.6.1.4.1.11606.4.2.6.1.8 | Counter | RO | mandatory |
| Soslam8gPortInFragments | 1.3.6.1.4.1.11606.4.2.6.1.9 | Counter | RO | mandatory |
| Soslam8gPortInOversize | 1.3.6.1.4.1.11606.4.2.6.1.10 | Counter | RO | mandatory |
| Soslam8gPortInJabber | 1.3.6.1.4.1.11606.4.2.6.1.11 | Counter | RO | mandatory |
| Soslam8gPortInRxErr | 1.3.6.1.4.1.11606.4.2.6.1.12 | Counter | RO | mandatory |
| Soslam8gPortInFCSErr | 1.3.6.1.4.1.11606.4.2.6.1.13 | Counter | RO | mandatory |
| Soslam8gPortInDiscards | 1.3.6.1.4.1.11606.4.2.6.1.14 | Counter | RO | mandatory |
| Soslam8gPortInFiltered | 1.3.6.1.4.1.11606.4.2.6.1.15 | Counter | RO | mandatory |
| Noslam8gPortRMONEgress | 1.3.6.1.4.1.11606.4.2.6.2 | |||
| Soslam8gPortOutOctetsLo | 1.3.6.1.4.1.11606.4.2.6.2.1 | Counter | RO | mandatory |
| Soslam8gPortOutOctetsHi | 1.3.6.1.4.1.11606.4.2.6.2.2 | Counter | RO | mandatory |
| Soslam8gPortOutUnicast | 1.3.6.1.4.1.11606.4.2.6.2.3 | Counter | RO | mandatory |
| Soslam8gPortOutBroadcasts | 1.3.6.1.4.1.11606.4.2.6.2.4 | Counter | RO | mandatory |
| Soslam8gPortOutMulticasts | 1.3.6.1.4.1.11606.4.2.6.2.5 | Counter | RO | mandatory |
| Soslam8gPortOutPause | 1.3.6.1.4.1.11606.4.2.6.2.6 | Counter | RO | mandatory |
| Soslam8gPortOutExcessive | 1.3.6.1.4.1.11606.4.2.6.2.7 | Counter | RO | mandatory |
| Soslam8gPortOutCollisions | 1.3.6.1.4.1.11606.4.2.6.2.8 | Counter | RO | mandatory |
| Soslam8gPortOutDeferred | 1.3.6.1.4.1.11606.4.2.6.2.9 | Counter | RO | mandatory |
| Soslam8gPortOutSingle | 1.3.6.1.4.1.11606.4.2.6.2.10 | Counter | RO | mandatory |
| Soslam8gPortOutMultiple | 1.3.6.1.4.1.11606.4.2.6.2.11 | Counter | RO | mandatory |
| Soslam8gPortOutFCSErr | 1.3.6.1.4.1.11606.4.2.6.2.12 | Counter | RO | mandatory |
| Soslam8gPortOutLate | 1.3.6.1.4.1.11606.4.2.6.2.13 | Counter | RO | mandatory |
| Soslam8gPortOutFiltered | 1.3.6.1.4.1.11606.4.2.6.2.14 | Counter | RO | mandatory |
| Noslam8gPortHistogram | 1.3.6.1.4.1.11606.4.2.6.3 | |||
| Soslam8gPortHistogramMode | 1.3.6.1.4.1.11606.4.2.6.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Histogram Counters Mode: ======================== The Histogram mode control how the Histogram counters work as follows. 1 - Count received frames only 2 - Count transmitted frames only 3 - Count receive and tranmitted frames
| ||||
| Soslam8gPortOut64Octets | 1.3.6.1.4.1.11606.4.2.6.3.2 | Counter | RO | mandatory |
| Soslam8gPortOut65to127Octets | 1.3.6.1.4.1.11606.4.2.6.3.3 | Counter | RO | mandatory |
| Soslam8gPortOut128to255Octets | 1.3.6.1.4.1.11606.4.2.6.3.4 | Counter | RO | mandatory |
| Soslam8gPortOut256to511Octets | 1.3.6.1.4.1.11606.4.2.6.3.5 | Counter | RO | mandatory |
| Soslam8gPortOut512to1023Octets | 1.3.6.1.4.1.11606.4.2.6.3.6 | Counter | RO | mandatory |
| Soslam8gPortOut1024toMaxOctets | 1.3.6.1.4.1.11606.4.2.6.3.7 | Counter | RO | mandatory |
| Nfpcm | 1.3.6.1.4.1.11606.5 | |||
| StargetNodeAddress | 1.3.6.1.4.1.11606.5.1 | OCTET STRING (SIZE (10)) | RW | mandatory |
scalar · OCTET STRING (SIZE (10)) · read-write · mandatory Target Node Address: ==================== FPCM is a broadcast device. 10 digits decimal address required to access the target optical node. Value of 4294967295 represent a broadcast address i.e. message will be send to all connected node. This value is the serial number of the ODN4P-ABC. | ||||
| Nodn4pAccess | 1.3.6.1.4.1.11606.5.2 | |||
| Sodn4pABSwitchingMode | 1.3.6.1.4.1.11606.5.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory AB Switching Mode: ================== The mode of operation for ODN4P-AB. Available operation mode are: - AUTOMATIC - MANUAL
| ||||
| Sodn4pChannelSelect | 1.3.6.1.4.1.11606.5.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Channel Select: =============== The channel to be selected by the AB redundancy switch. Upon changing the channel, AB operation mode at the target device will change to MANUAL mode automatically.
| ||||
| Sodn4pSwitchingHysteresis | 1.3.6.1.4.1.11606.5.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Switch Hysteresis: ================== Primary Optical recovery level.
| ||||
| Sodn4pPrimarySwitchOverTime | 1.3.6.1.4.1.11606.5.2.4 | INTEGER (1..15) | RW | mandatory |
scalar · INTEGER (1..15) · read-write · mandatory Primary switch-over time: ========================= The number of second wait required before change of state | ||||
| Sodn4pSecondarySwitchOverTime | 1.3.6.1.4.1.11606.5.2.5 | INTEGER (1..15) | RW | mandatory |
scalar · INTEGER (1..15) · read-write · mandatory Secondary switch-over time: =========================== The number of second wait required before change of state | ||||
| Sodn4pAttenuator1 | 1.3.6.1.4.1.11606.5.2.6 | INTEGER (2..40) | RW | mandatory |
scalar · INTEGER (2..40) · read-write · mandatory Attenuator 1: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | ||||
| Sodn4pAttenuator2 | 1.3.6.1.4.1.11606.5.2.7 | INTEGER (2..40) | RW | mandatory |
scalar · INTEGER (2..40) · read-write · mandatory Attenuator 2: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | ||||
| Sodn4pAttenuator3 | 1.3.6.1.4.1.11606.5.2.8 | INTEGER (2..40) | RW | mandatory |
scalar · INTEGER (2..40) · read-write · mandatory Attenuator 3: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | ||||
| Sodn4pAttenuator4 | 1.3.6.1.4.1.11606.5.2.9 | INTEGER (2..40) | RW | mandatory |
scalar · INTEGER (2..40) · read-write · mandatory Attenuator 4: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | ||||
| Sodn4pHomeFskChannel | 1.3.6.1.4.1.11606.5.2.10 | INTEGER (0..100) | RW | mandatory |
scalar · INTEGER (0..100) · read-write · mandatory Remote node FSK home channel: ============================= Each network may use different default FSK channel. This is the default FSK channel to be managed by operator. Optical node always tune to home channel prior to agility. | ||||
| Sodn4pFskMode | 1.3.6.1.4.1.11606.5.2.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory FSK Operating mode ================== Force FSK to operate in either FIX or AGILE mode. FIX - FSK receiver always try to lock to the known FSK frequency AGILE - Always search for an FSK channel that is capable of decoding data
| ||||
| Sodn4pLoopTest | 1.3.6.1.4.1.11606.5.2.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory ODN4P LOOP TEST =============== Acceptable value is 0-255 or 8-bit number. Value between between 1..255 will be display on the connected RPQRM of the selected channel if this OID has been iniated. Set value to 0xFB will clear loopback test and normal data will then be seen in the RPQRM. Operator should only use value between 0x70 to 0x7F for testing Other values are reserved for NETCRAFT
| ||||
| NnodeAccess | 1.3.6.1.4.1.11606.5.3 | |||
| SnodeAccessDataLength | 1.3.6.1.4.1.11606.5.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Node Access Control Data Length: ================================ This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | ||||
| SnodeAccessData | 1.3.6.1.4.1.11606.5.3.2 | Opaque (SIZE (0..32)) | RW | mandatory |
scalar · Opaque (SIZE (0..32)) · read-write · mandatory Node Access Control Data: ========================= This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | ||||
| SnodeAccessCmd | 1.3.6.1.4.1.11606.5.3.3 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory Node Access Control Command: ============================ This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | ||||
| NfpcmCtrl | 1.3.6.1.4.1.11606.5.4 | |||
| SfpcmFSKChannel | 1.3.6.1.4.1.11606.5.4.1 | INTEGER (0..100) | RW | mandatory |
scalar · INTEGER (0..100) · read-write · mandatory FSK Channel modulated by FPCM: ============================== Acceptable FSK channel range 0-100. FSK modulation range 80-90MHz (Channel 0-100 respectively) | ||||
| SfpcmRFLevel | 1.3.6.1.4.1.11606.5.4.2 | INTEGER (25..45) | RW | mandatory |
scalar · INTEGER (25..45) · read-write · mandatory FPCM RF level ============= RF level setting in 1dBmV scale. Current supported value is 25-45dBmV | ||||
| Nmau | 1.3.6.1.4.1.11606.6 | |||
| NmauProductInfo | 1.3.6.1.4.1.11606.6.1 | |||
| SmauProductModelName | 1.3.6.1.4.1.11606.6.1.1 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Product model name | ||||
| SmauProductVersion | 1.3.6.1.4.1.11606.6.1.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Product version number | ||||
| SmauProductVersionDate | 1.3.6.1.4.1.11606.6.1.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Product build date | ||||
| SmauProductMAC | 1.3.6.1.4.1.11606.6.1.4 | OCTET STRING (SIZE (6)) | RO | mandatory |
| SmauProductSerialNumber | 1.3.6.1.4.1.11606.6.1.5 | OCTET STRING (SIZE (6)) | RO | mandatory |
| NmauStatus | 1.3.6.1.4.1.11606.6.2 | |||
| SmauStatusVACType | 1.3.6.1.4.1.11606.6.2.1 | TypePowerSupply | RO | mandatory |
scalar · TypePowerSupply · read-only · mandatory VAC input type. e.g. '220V' | ||||
| SmauStatus5V | 1.3.6.1.4.1.11606.6.2.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory +5V supply voltage level. Unit is in Volt e.g. 4.92V | ||||
| SmauStatus12V | 1.3.6.1.4.1.11606.6.2.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory +12V supply voltage level. Unit is in Volt e.g. 12.00V | ||||
| SmauStatus24V | 1.3.6.1.4.1.11606.6.2.4 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory +24V supply voltage level. Unit is in Volt e.g. 24.10V | ||||
| SmauStatusInputOpticalPower | 1.3.6.1.4.1.11606.6.2.5 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Optical input power level. Unit is in dBm e.g. -2.05dBm | ||||
| SmauStatusOutputOpticalPower | 1.3.6.1.4.1.11606.6.2.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Optical input power level. Unit is in dBm e.g. -2.05dBm | ||||
| SmauStatusRFOutputPower | 1.3.6.1.4.1.11606.6.2.7 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Total RF output power level. Unit is in dBmV e.g. 41.23dBmV total or 25.00dBmV/Ch@42Ch. | ||||
| SmauStatusTemperature | 1.3.6.1.4.1.11606.6.2.8 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Module internal temperature. Unit is in Degree Celsius e.g. 29.25C | ||||
| SmauStatusLid | 1.3.6.1.4.1.11606.6.2.9 | TypeTamper | RO | mandatory |
scalar · TypeTamper · read-only · mandatory Device lid open/close status | ||||
| SmauStatusONUInstalled | 1.3.6.1.4.1.11606.6.2.10 | TypeYesNo | RO | mandatory |
scalar · TypeYesNo · read-only · mandatory EPON-ONU installed status. | ||||
| SmauStatusMOCAInstalled | 1.3.6.1.4.1.11606.6.2.11 | TypeYesNo | RO | mandatory |
scalar · TypeYesNo · read-only · mandatory MOCA installed status. | ||||
| SmauStatusPLCInstalled | 1.3.6.1.4.1.11606.6.2.12 | TypeYesNo | RO | mandatory |
scalar · TypeYesNo · read-only · mandatory PLC installed status. | ||||
| SmauStatusLED | 1.3.6.1.4.1.11606.6.2.13 | TypeOnOff | RO | mandatory |
scalar · TypeOnOff · read-only · mandatory Status LED | ||||
| SmauStatusGainControlLED | 1.3.6.1.4.1.11606.6.2.14 | TypeOnOff | RO | mandatory |
scalar · TypeOnOff · read-only · mandatory Gain control LED (AGC/MGC) status. ON - AGC mode OFF - MGC mode | ||||
| SmauStatusOpticalInputHighLED | 1.3.6.1.4.1.11606.6.2.15 | TypeOnOff | RO | mandatory |
scalar · TypeOnOff · read-only · mandatory Optical input high led indicator ON - Optical input is too high. | ||||
| SmauStatusOpticalInputLowLED | 1.3.6.1.4.1.11606.6.2.16 | TypeOnOff | RO | mandatory |
scalar · TypeOnOff · read-only · mandatory Optical input LOW led indicator ON - Optical input is too low. | ||||
| SmauStatus5VMin | 1.3.6.1.4.1.11606.6.2.17 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +5V Supply MIN voltage alarm level | ||||
| SmauStatus5VMax | 1.3.6.1.4.1.11606.6.2.18 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +5V Supply MAX voltage alarm level | ||||
| SmauStatus12VMin | 1.3.6.1.4.1.11606.6.2.19 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +12V Supply MIN voltage alarm level | ||||
| SmauStatus12VMax | 1.3.6.1.4.1.11606.6.2.20 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +12V Supply MAX voltage alarm level | ||||
| SmauStatus24VMin | 1.3.6.1.4.1.11606.6.2.21 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +24V Supply MIN voltage alarm level | ||||
| SmauStatus24VMax | 1.3.6.1.4.1.11606.6.2.22 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory +24V Supply MAX voltage alarm level | ||||
| SmauStatusInputOpticalPowerMin | 1.3.6.1.4.1.11606.6.2.23 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Optical Input Power MIN alarm level | ||||
| SmauStatusInputOpticalPowerMax | 1.3.6.1.4.1.11606.6.2.24 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Optical Input Power MAX alarm level | ||||
| SmauStatusOutputOpticalPowerMin | 1.3.6.1.4.1.11606.6.2.25 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Optical Output Power MIN alarm level | ||||
| SmauStatusOutputOpticalPowerMax | 1.3.6.1.4.1.11606.6.2.26 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Optical Output Power MAX alarm level | ||||
| SmauStatusTemperatureMin | 1.3.6.1.4.1.11606.6.2.27 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Temperature MIN alarm level | ||||
| SmauStatusTemperatureMax | 1.3.6.1.4.1.11606.6.2.28 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Temperature MAX alarm level | ||||
| SmauStatusGainControlMin | 1.3.6.1.4.1.11606.6.2.29 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Gain Control MIN Level | ||||
| SmauStatusGainControlMax | 1.3.6.1.4.1.11606.6.2.30 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Gain Control MAX Level | ||||
| SmauStatusAgcLock | 1.3.6.1.4.1.11606.6.2.31 | TypeAGCStatus | RO | mandatory |
scalar · TypeAGCStatus · read-only · mandatory AGC lock when the controlled signal is within range. AGC unlock when agc cannot control the signal or signal is out of range for AGC to operate. | ||||
| NmauControl | 1.3.6.1.4.1.11606.6.3 | |||
| SmauGainControlMode | 1.3.6.1.4.1.11606.6.3.1 | TypeGainMode | RW | mandatory |
scalar · TypeGainMode · read-write · mandatory RF gain control setting. 1dB control step. Control range to be adviced. | ||||
| SmauTrapEnabled | 1.3.6.1.4.1.11606.6.3.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates if this trap entry is enabled or not.
| ||||
| SmauPrimaryCommunity | 1.3.6.1.4.1.11606.6.3.3 | DisplayString | RW | mandatory |
scalar · DisplayString · read-write · mandatory Primary Community String to be used by agent for SNMP GET/SET for mauTrapPrimaryReceiverIPAddress | ||||
| SmauSecondaryCommunity | 1.3.6.1.4.1.11606.6.3.4 | DisplayString | RW | mandatory |
scalar · DisplayString · read-write · mandatory Secondary Community String to be used by agent for SNMP GET/SET for mauTrapSecondaryReceiverIPAddress | ||||
| SmauPrimaryTrapReceiverIPAddress | 1.3.6.1.4.1.11606.6.3.5 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The primary Trap Receiver station IP address | ||||
| SmauSecondaryTrapReceiverIPAddress | 1.3.6.1.4.1.11606.6.3.6 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The secondary Trap Receiver station IP address | ||||
| NmauTraps | 1.3.6.1.4.1.11606.6.4 | |||
| SmauTrapMessageDescr | 1.3.6.1.4.1.11606.6.4.1 | DisplayString | RW | mandatory |
| Nlte153 | 1.3.6.1.4.1.11606.7 | |||
| Nlte153Laser | 1.3.6.1.4.1.11606.7.1 | |||
| StagID | 1.3.6.1.4.1.11606.7.1.1 | OCTET STRING (SIZE (0..23)) | RW | |
scalar · OCTET STRING (SIZE (0..23)) · read-write · current Displays the tag name of the device in human-readable format as set by user. | ||||
| SmodelNumber | 1.3.6.1.4.1.11606.7.1.2 | OCTET STRING (SIZE (0..23)) | RO | |
scalar · OCTET STRING (SIZE (0..23)) · read-only · current Displays the name of the device model number in human-readable format as set from the factory. | ||||
| SmfgDate | 1.3.6.1.4.1.11606.7.1.3 | OCTET STRING (SIZE (0..23)) | RO | |
scalar · OCTET STRING (SIZE (0..23)) · read-only · current Displays the manufacturing date in human-readable format as set from the factory. | ||||
| SserialNum | 1.3.6.1.4.1.11606.7.1.4 | OCTET STRING (SIZE (0..23)) | RO | |
scalar · OCTET STRING (SIZE (0..23)) · read-only · current Displays the serial number in human-readable format as set from the factory. | ||||
| SfirmwareRev | 1.3.6.1.4.1.11606.7.1.5 | OCTET STRING (SIZE (0..23)) | RO | |
scalar · OCTET STRING (SIZE (0..23)) · read-only · current Displays the software revision of the device in human-readable format. | ||||
| SengRev | 1.3.6.1.4.1.11606.7.1.6 | OCTET STRING (SIZE (0..23)) | RO | |
scalar · OCTET STRING (SIZE (0..23)) · read-only · current Displays the engineering revision in human-readable format as set from the factory. | ||||
| SsystemTemp | 1.3.6.1.4.1.11606.7.1.7 | Integer32 (-500..1200) | RO | |
scalar · Integer32 (-500..1200) · read-only · current Returns the unit temperature.
| ||||
| SlaserCurrent | 1.3.6.1.4.1.11606.7.1.8 | Integer32 (0..1250) | RO | |
scalar · Integer32 (0..1250) · read-only · current Returns measured laser bias current.
| ||||
| SlaserTemperature | 1.3.6.1.4.1.11606.7.1.9 | Integer32 (-500..800) | RO | |
scalar · Integer32 (-500..800) · read-only · current Returns the measured laser temperature.
| ||||
| SinputRFLevel | 1.3.6.1.4.1.11606.7.1.10 | Integer32 (-1000..100) | RO | |
scalar · Integer32 (-1000..100) · read-only · current Returns the input RF level.
| ||||
| ScompositeRFLevel | 1.3.6.1.4.1.11606.7.1.11 | Integer32 (-1000..100) | RO | |
scalar · Integer32 (-1000..100) · read-only · current Returns the measured composite RF level.
| ||||
| SopticalPowerOut1 | 1.3.6.1.4.1.11606.7.1.12 | Integer32 (-1000..200) | RO | |
scalar · Integer32 (-1000..200) · read-only · current Returns the optical power output for port 1.
| ||||
| SopticalPowerOut2 | 1.3.6.1.4.1.11606.7.1.13 | Integer32 (-1000..200) | RO | |
scalar · Integer32 (-1000..200) · read-only · current Returns the optical power output for port 2.
| ||||
| StecCurrent | 1.3.6.1.4.1.11606.7.1.14 | Integer32 (-25000..25000) | RO | |
scalar · Integer32 (-25000..25000) · read-only · current Returns the current of thermoelectric cooler inside the laser asssembly.
| ||||
| SattenuationSet | 1.3.6.1.4.1.11606.7.1.15 | Integer32 (-70..30) | RW | |
scalar · Integer32 (-70..30) · read-write · current Manual mode RF attenuator setpoint.
| ||||
| SomiSetpoint | 1.3.6.1.4.1.11606.7.1.16 | Integer32 (-30..30) | RW | |
scalar · Integer32 (-30..30) · read-write · current Optical modulation index is implemented for CW or Video AGC modes as RF attenuator setpoint.
| ||||
| SagcMode | 1.3.6.1.4.1.11606.7.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Returns the AGC mode.
| ||||
| SsbsSuppression | 1.3.6.1.4.1.11606.7.1.18 | Integer32 (140..180) | RW | |
scalar · Integer32 (140..180) · read-write · current SBS suppression level.
| ||||
| SfiberDispersionCntl | 1.3.6.1.4.1.11606.7.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Fiber dispersion compensation On/Off control.
| ||||
| SfiberDispersionGain | 1.3.6.1.4.1.11606.7.1.20 | Integer32 (-40..40) | RW | |
scalar · Integer32 (-40..40) · read-write · current Fiber dispersion gain compensation.
| ||||
| SfiberDispersionPhase | 1.3.6.1.4.1.11606.7.1.21 | Integer32 (-40..40) | RW | |
scalar · Integer32 (-40..40) · read-write · current Fiber dispersion phase compensation.
| ||||
| SfiberDispersionSlope | 1.3.6.1.4.1.11606.7.1.22 | Integer32 (-40..40) | RW | |
scalar · Integer32 (-40..40) · read-write · current Fiber dispersion slope compensation.
| ||||
| SlaserOnOff | 1.3.6.1.4.1.11606.7.1.23 | INTEGER | RO | |
scalar · INTEGER · read-only · current returns the active laser On/Off status.
| ||||
| Skeyswitch | 1.3.6.1.4.1.11606.7.1.24 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the status of the front panel keyswitch.
| ||||
| SremoteLaserControl | 1.3.6.1.4.1.11606.7.1.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Remote laser On/Off control.
| ||||
| SresetCause | 1.3.6.1.4.1.11606.7.1.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object reports the cause of the last reset.
| ||||
| SresetControl | 1.3.6.1.4.1.11606.7.1.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to reset the transmitter module by writing a 1 to it. Other values written to the object have no effect. Reading the object returns a 1 and has no effect on the module.
| ||||
| Ssbs2GHzPower | 1.3.6.1.4.1.11606.7.1.28 | Integer32 (-300..300) | RO | |
scalar · Integer32 (-300..300) · read-only · current 2GHz SBS output power level.
| ||||
| Ssbs6GHzPower | 1.3.6.1.4.1.11606.7.1.29 | Integer32 (-300..300) | RO | |
scalar · Integer32 (-300..300) · read-only · current 6GHz SBS output power level.
| ||||
| Smonitor5v | 1.3.6.1.4.1.11606.7.1.30 | Integer32 (0..70) | RO | |
scalar · Integer32 (0..70) · read-only · current Returns the measured value of the +5V supply.
| ||||
| Smonitor12v | 1.3.6.1.4.1.11606.7.1.31 | Integer32 (0..150) | RO | |
scalar · Integer32 (0..150) · read-only · current Returns the measured value of the +12V supply.
| ||||
| Smonitor24v | 1.3.6.1.4.1.11606.7.1.32 | Integer32 (0..300) | RO | |
scalar · Integer32 (0..300) · read-only · current Returns the measured value of the +24V supply.
| ||||
| SmonitorM5v | 1.3.6.1.4.1.11606.7.1.33 | Integer32 (-70..70) | RO | |
scalar · Integer32 (-70..70) · read-only · current Returns the measured value of the -5V supply.
| ||||
| SmonitorM12v | 1.3.6.1.4.1.11606.7.1.34 | Integer32 (-150..150) | RO | |
scalar · Integer32 (-150..150) · read-only · current Returns the measured value of the -12V supply.
| ||||
| SunitStatusEnable | 1.3.6.1.4.1.11606.7.1.35 | Bits | RW | |
scalar · Bits · read-write · current Indicates the unit status alarm enable. This
value is bit encoded therefore it is capable
of indicating multiple alarm enable conditions.
The bits are defined as follows:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System | Laser | Laser | Laser | Laser | Input | Input |
| Temp | Temp |Current|Current| Temp | Temp | RF | RF |
| High | Low | High | Low | High | Low | Level | Level |
| | | | | | | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|Optical|Optical| TEC | AGC |Key in |Remote | | |
| Power | Power |Current| Unlock| Off | Off | | |
| Out | Out | High | |Position Mode | | |
| High | Low | | | | Set | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SunitStatusMajor | 1.3.6.1.4.1.11606.7.1.36 | Bits | RO | |
scalar · Bits · read-only · current Returns a bit mapped status word where each bit set (as defined below)
indicates a specific active alarm:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System | Laser | Laser | Laser | Laser | Input | Input |
| Temp | Temp |Current|Current| Temp | Temp | RF | RF |
| High | Low | High | Low | High | Low | Level | Level |
| | | | | | | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|Optical|Optical| TEC | AGC |Key in |Remote | | |
| Power | Power |Current| Unlock| Off | Off | | |
| Out | Out | High | |Position Mode | | |
| | | | | | Set | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SunitStatusMinor | 1.3.6.1.4.1.11606.7.1.37 | Bits | RO | |
scalar · Bits · read-only · current Returns a bit mapped status word where each bit set (as defined below)
indicates a specific active warning:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System | Laser | Laser | Laser | Laser | Input | Input |
| Temp | Temp |Current|Current| Temp | Temp | RF | RF |
| High | Low | High | Low | High | Low | Level | Level |
| | | | | | | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|Optical|Optical| TEC | AGC |Key in |Remote | | |
| Power | Power |Current| Unlock| Off | Off | | |
| Out | Out | High | |Position Mode | | |
| High | Low | | | | Set | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SunitStatusHistory | 1.3.6.1.4.1.11606.7.1.38 | Bits | RW | |
scalar · Bits · read-write · current Returns a bit mapped status word where each bit set (as defined below)
indicates a an alarm had occurred since the last power up or clear:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System | Laser | Laser | Laser | Laser | Input | Input |
| Temp | Temp |Current|Current| Temp | Temp | RF | RF |
| High | Low | High | Low | High | Low | Level | Level |
| | | | | | | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|Optical|Optical| TEC | AGC |Key in |Remote | | |
| Power | Power |Current| Unlock| Off | Off | | |
| Out | Out | High | |Position Mode | | |
| High | Low | | | | Set | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
Clear status history by writing a value of 0.
| ||||
| SmiscStatusEnable | 1.3.6.1.4.1.11606.7.1.39 | Bits | RW | |
scalar · Bits · read-write · current Indicates the miscellaneous status alarm enable. This
value is bit encoded therefore it is capable
of indicating multiple alarm enable conditions.
The bits are defined as follows:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
| 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System |
| SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V |
| Power | Power | Power | Power | Power | Power | Power | Power |
| High | Low | High | Low | High | Low | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System |System |System |System |System | Comm | |
| +24V | +24V | -5V | -5V | -12V | -12V |Failure| |
| Power | Power | Power | Power | Power | Power | | |
| High | Low | High | Low | High | Low | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
16 17 18 19 20 21 22 23
+-------+-------+-------+-------+-------+-------+-------+-------+
| Power | Power |Cooling|Cooling| | | | |
| Supply| Supply| Fan | Fan | | | | |
| A | B | A | B | | | | |
|Failure|Failure|Failure|Failure| | | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SmiscStatusMajor | 1.3.6.1.4.1.11606.7.1.40 | Bits | RO | |
scalar · Bits · read-only · current Returns a bit mapped status word where each bit set (as defined below)
indicates a specific active alarm:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
| 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System |
| SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V |
| Power | Power | Power | Power | Power | Power | Power | Power |
| High | Low | High | Low | High | Low | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System |System |System |System |System | Comm |Power |
| +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply |
| Power | Power | Power | Power | Power | Power | |Failure|
| High | Low | High | Low | High | Low | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
16 17 18 19 20 21 22 23
+-------+-------+-------+-------+-------+-------+-------+-------+
| Power | Power |Cooling|Cooling| | | | |
| Supply| Supply| Fan | Fan | | | | |
| A | B | A | B | | | | |
|Failure|Failure|Failure|Failure| | | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SmiscStatusMinor | 1.3.6.1.4.1.11606.7.1.41 | Bits | RO | |
scalar · Bits · read-only · current Returns a bit mapped status word where each bit set (as defined below)
indicates a specific active warning:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
| 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System |
| SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V |
| Power | Power | Power | Power | Power | Power | Power | Power |
| High | Low | High | Low | High | Low | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System |System |System |System |System | Comm |Power |
| +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply |
| Power | Power | Power | Power | Power | Power | |Failure|
| High | Low | High | Low | High | Low | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
16 17 18 19 20 21 22 23
+-------+-------+-------+-------+-------+-------+-------+-------+
| Power | Power |Cooling|Cooling| | | | |
| Supply| Supply| Fan | Fan | | | | |
| A | B | A | B | | | | |
|Failure|Failure|Failure|Failure| | | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
| ||||
| SmiscStatusHistory | 1.3.6.1.4.1.11606.7.1.42 | Bits | RW | |
scalar · Bits · read-write · current Returns a bit mapped status word where each bit set (as defined below)
indicates a an alarm had occurred since the last power up or clear:
0 1 2 3 4 5 6 7
+-------+-------+-------+-------+-------+-------+-------+-------+
| 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System |
| SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V |
| Power | Power | Power | Power | Power | Power | Power | Power |
| High | Low | High | Low | High | Low | High | Low |
+-------+-------+-------+-------+-------+-------+-------+-------+
8 9 10 11 12 13 14 15
+-------+-------+-------+-------+-------+-------+-------+-------+
|System |System |System |System |System |System | Comm |Power |
| +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply |
| Power | Power | Power | Power | Power | Power | |Failure|
| High | Low | High | Low | High | Low | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
16 17 18 19 20 21 22 23
+-------+-------+-------+-------+-------+-------+-------+-------+
| Power | Power |Cooling|Cooling| | | | |
| Supply| Supply| Fan | Fan | | | | |
| A | B | A | B | | | | |
|Failure|Failure|Failure|Failure| | | | |
+-------+-------+-------+-------+-------+-------+-------+-------+
Clear status history by writing a value of 0.
| ||||
| SfrontPanelLEDStatus | 1.3.6.1.4.1.11606.7.1.43 | Bits | RO | |
scalar · Bits · read-only · current Returns a bit mapped status word where each bit set (as defined below)
indicates a specific LED state:
0 1 2 3 4 5
+-------+-------+-------+-------+-------+-------+
| Laser | Laser |Status |Status |Status |LaserOn|
| On | Off | Okay | Major | Minor | Rear |
| | | | Alarm | Alarm | Panel |
| Green | Red | Green | Red | Red | Green |
+-------+-------+-------+-------+-------+-------+
| ||||
| SupTime defined twice | 1.3.6.1.4.1.11606.7.1.44 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Returns the number of elapsed seconds since the last time the unit restarted.
| ||||
| NtransmitterNotificationPrefix | 1.3.6.1.4.1.11606.7.1.45 | |||
| NtransmitterCommonNotifications | 1.3.6.1.4.1.11606.7.1.45.0 | |||
| !transmitterNoAlarmsPresent | 1.3.6.1.4.1.11606.7.1.45.0.0 | |||
notification · current No alarms are present. | ||||
| !transmitterSystemTemperatureHigh | 1.3.6.1.4.1.11606.7.1.45.0.1 | |||
notification · current The system temperature has exceeded its normal operating value.
| ||||
| !transmitterSystemTemperatureLow | 1.3.6.1.4.1.11606.7.1.45.0.2 | |||
notification · current The system temperature has exceeded its normal operating value.
| ||||
| !transmitterLaserCurrentHigh | 1.3.6.1.4.1.11606.7.1.45.0.3 | |||
notification · current The laser current has exceeded its normal operating value.
| ||||
| !transmitterLaserCurrentLow | 1.3.6.1.4.1.11606.7.1.45.0.4 | |||
notification · current The laser current has exceeded its normal operating value.
| ||||
| !transmitterLaserTemperatureHigh | 1.3.6.1.4.1.11606.7.1.45.0.5 | |||
notification · current The laser temperature has exceeded its normal operating value.
| ||||
| !transmitterLaserTemperatureLow | 1.3.6.1.4.1.11606.7.1.45.0.6 | |||
notification · current The laser temperature has exceeded its normal operating value.
| ||||
| !transmitterInputRFLevelHigh | 1.3.6.1.4.1.11606.7.1.45.0.7 | |||
notification · current The input RF level has exceeded its normal operating value.
| ||||
| !transmitterInputRFLevelLow | 1.3.6.1.4.1.11606.7.1.45.0.8 | |||
notification · current The input RF level has exceeded its normal operating value.
| ||||
| !transmitterOpticalPowerOutputHigh | 1.3.6.1.4.1.11606.7.1.45.0.9 | |||
notification · current The optical power output has exceeded its normal operating value.
| ||||
| !transmitterOpticalPowerOutputLow | 1.3.6.1.4.1.11606.7.1.45.0.10 | |||
notification · current The optical power output has exceeded its normal operating value.
| ||||
| !transmitterTECCurrentHigh | 1.3.6.1.4.1.11606.7.1.45.0.11 | |||
notification · current The thermoelectric cooler current has exceeded its normal operating value.
| ||||
| !transmitterAGCUnlocked | 1.3.6.1.4.1.11606.7.1.45.0.12 | |||
notification · current The RF attenuator automatic gain control (AGC) is outside its normal operating range.
| ||||
| !transmitterKeySwitchOffPosition | 1.3.6.1.4.1.11606.7.1.45.0.13 | |||
| !transmitterRemoteLaserOffMode | 1.3.6.1.4.1.11606.7.1.45.0.14 | |||
notification · current The remote laser control is commanded to be in OFF mode.
| ||||
| !transmitter2GHzSBSPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.15 | |||
notification · current The 2GHz SBS output power has exceeded its normal operating value.
| ||||
| !transmitter2GHzSBSPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.16 | |||
notification · current The 2GHz SBS output power has exceeded its normal operating value.
| ||||
| !transmitter6GHzSBSPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.17 | |||
notification · current The 6GHz SBS output power has exceeded its normal operating value.
| ||||
| !transmitter6GHzSBSPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.18 | |||
notification · current The 6GHz SBS output power has exceeded its normal operating value.
| ||||
| !transmitterSystem5VPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.19 | |||
notification · current The system +5V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystem5VPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.20 | |||
notification · current The system +5V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystem12VPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.21 | |||
notification · current The system +12V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystem12VPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.22 | |||
notification · current The system +12V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystem24VPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.23 | |||
notification · current The system +24V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystem24VPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.24 | |||
notification · current The system +24V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystemM5VPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.25 | |||
notification · current The system -5V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystemM5VPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.26 | |||
notification · current The system -5V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystemM12VPowerHigh | 1.3.6.1.4.1.11606.7.1.45.0.27 | |||
notification · current The system -12V power supply has exceeded its normal operating value.
| ||||
| !transmitterSystemM12VPowerLow | 1.3.6.1.4.1.11606.7.1.45.0.28 | |||
notification · current The system -12V power supply has exceeded its normal operating value.
| ||||
| !transmitterCommunicationFailure | 1.3.6.1.4.1.11606.7.1.45.0.29 | |||
notification · current A failure was detected with the internal network communication interface.
| ||||
| !transmitterPowerSupplyAFailure | 1.3.6.1.4.1.11606.7.1.45.0.30 | |||
| !transmitterPowerSupplyBFailure | 1.3.6.1.4.1.11606.7.1.45.0.31 | |||
| !transmitterCoolingFanAFailure | 1.3.6.1.4.1.11606.7.1.45.0.32 | |||
| !transmitterCoolingFanBFailure | 1.3.6.1.4.1.11606.7.1.45.0.33 | |||
| Nlte153PowerSupply | 1.3.6.1.4.1.11606.7.2 | |||
| SpowerSupplyType | 1.3.6.1.4.1.11606.7.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the installed power supply type.
single5V(1) - Single AC/DC power supply with rated output of 5V at 100W.
dualRedundant5V(2) - Dual, redundant AC/DC power supplies with rated output of
5V at 100W each.
single5-12-24V(3) - Single AC/DC power supply with rated outputs of 5V, +/-12V
and 24V at 100W total.
dualRedundant5-12-24V(4) - Dual, redundant AC/DC power supplies with rated outputs of
5V, +/-12V and 24V at 100W total.
| ||||
| SpowerSupplyTemp | 1.3.6.1.4.1.11606.7.2.2 | Integer32 (-500..1200) | RO | |
scalar · Integer32 (-500..1200) · read-only · current Returns the power supply regulator temperature.
| ||||
| SpowerSupplyStatusA | 1.3.6.1.4.1.11606.7.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the operating status of power supply A.
| ||||
| SpowerSupplyStatusB | 1.3.6.1.4.1.11606.7.2.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the operating status of power supply B.
| ||||
| ScoolingFanA | 1.3.6.1.4.1.11606.7.2.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the operating status of chassis cooling fan A.
| ||||
| ScoolingFanB | 1.3.6.1.4.1.11606.7.2.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current Returns the operating status of chassis cooling fan B.
| ||||
| SupTime defined twice | 1.3.6.1.4.1.11606.7.2.7 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Returns the number of elapsed seconds since the last time the unit restarted.
| ||||
| NpowerSupplyNotificationPrefix | 1.3.6.1.4.1.11606.7.2.8 | |||
| NpowerSupplyNotifications | 1.3.6.1.4.1.11606.7.2.8.0 | |||
| !powerSupplyNoAlarmsPresent | 1.3.6.1.4.1.11606.7.2.8.0.0 | |||
notification · current No alarms are present. | ||||
| !powerSupplyPowerSupplyFailureA | 1.3.6.1.4.1.11606.7.2.8.0.1 | |||
| !powerSupplyPowerSupplyFailureB | 1.3.6.1.4.1.11606.7.2.8.0.2 | |||
| !powerSupplyCoolingFanFailureA | 1.3.6.1.4.1.11606.7.2.8.0.3 | |||
| !powerSupplyCoolingFanFailureB | 1.3.6.1.4.1.11606.7.2.8.0.4 | |||
Traps / Notifications
- cpon100CATVAlarm
1.3.6.1.4.1.11606.2.0.0.414 - cpon100ContactInput
1.3.6.1.4.1.11606.2.0.0.412 - cpon100sensingInput
1.3.6.1.4.1.11606.2.0.0.413 - mauStatus12VTrap
1.3.6.1.4.1.11606.0.0.416 - mauStatus24VTrap
1.3.6.1.4.1.11606.0.0.417 - mauStatus5VTrap
1.3.6.1.4.1.11606.0.0.415 - mauStatusInputOpticalPowerTrap
1.3.6.1.4.1.11606.0.0.418 - mauStatusLidTrap
1.3.6.1.4.1.11606.0.0.422 - mauStatusOutputOpticalPowerTrap
1.3.6.1.4.1.11606.0.0.419 - mauStatusRFOutputTrap
1.3.6.1.4.1.11606.0.0.420 - mauStatusTemperatureTrap
1.3.6.1.4.1.11606.0.0.421 - module110
1.3.6.1.4.1.11606.0.0.110 - module111
1.3.6.1.4.1.11606.0.0.111 - module112
1.3.6.1.4.1.11606.0.0.112 - module113
1.3.6.1.4.1.11606.0.0.113 - module114
1.3.6.1.4.1.11606.0.0.114 - module115
1.3.6.1.4.1.11606.0.0.115 - module116
1.3.6.1.4.1.11606.0.0.116 - module117
1.3.6.1.4.1.11606.0.0.117 - module118
1.3.6.1.4.1.11606.0.0.118 - module119
1.3.6.1.4.1.11606.0.0.119 - module120
1.3.6.1.4.1.11606.0.0.120 - module121
1.3.6.1.4.1.11606.0.0.121 - module122
1.3.6.1.4.1.11606.0.0.122 - module123
1.3.6.1.4.1.11606.0.0.123 - module124
1.3.6.1.4.1.11606.0.0.124 - module125
1.3.6.1.4.1.11606.0.0.125 - module126
1.3.6.1.4.1.11606.0.0.126 - module127
1.3.6.1.4.1.11606.0.0.127 - module128
1.3.6.1.4.1.11606.0.0.128 - module129
1.3.6.1.4.1.11606.0.0.129 - module130
1.3.6.1.4.1.11606.0.0.130 - module131
1.3.6.1.4.1.11606.0.0.131 - module15
1.3.6.1.4.1.11606.0.0.15 - module16
1.3.6.1.4.1.11606.0.0.16 - module17
1.3.6.1.4.1.11606.0.0.17 - module18
1.3.6.1.4.1.11606.0.0.18 - module19
1.3.6.1.4.1.11606.0.0.19 - module210
1.3.6.1.4.1.11606.0.0.210 - module211
1.3.6.1.4.1.11606.0.0.211 - module212
1.3.6.1.4.1.11606.0.0.212 - module213
1.3.6.1.4.1.11606.0.0.213 - module214
1.3.6.1.4.1.11606.0.0.214 - module215
1.3.6.1.4.1.11606.0.0.215 - module216
1.3.6.1.4.1.11606.0.0.216 - module217
1.3.6.1.4.1.11606.0.0.217 - module218
1.3.6.1.4.1.11606.0.0.218 - module219
1.3.6.1.4.1.11606.0.0.219 - module220
1.3.6.1.4.1.11606.0.0.220 - module221
1.3.6.1.4.1.11606.0.0.221 - module222
1.3.6.1.4.1.11606.0.0.222 - module223
1.3.6.1.4.1.11606.0.0.223 - module224
1.3.6.1.4.1.11606.0.0.224 - module225
1.3.6.1.4.1.11606.0.0.225 - module226
1.3.6.1.4.1.11606.0.0.226 - module227
1.3.6.1.4.1.11606.0.0.227 - module228
1.3.6.1.4.1.11606.0.0.228 - module229
1.3.6.1.4.1.11606.0.0.229 - module230
1.3.6.1.4.1.11606.0.0.230 - module231
1.3.6.1.4.1.11606.0.0.231 - module25
1.3.6.1.4.1.11606.0.0.25 - module26
1.3.6.1.4.1.11606.0.0.26 - module27
1.3.6.1.4.1.11606.0.0.27 - module28
1.3.6.1.4.1.11606.0.0.28 - module29
1.3.6.1.4.1.11606.0.0.29 - module310
1.3.6.1.4.1.11606.0.0.310 - module311
1.3.6.1.4.1.11606.0.0.311 - module312
1.3.6.1.4.1.11606.0.0.312 - module313
1.3.6.1.4.1.11606.0.0.313 - module314
1.3.6.1.4.1.11606.0.0.314 - module315
1.3.6.1.4.1.11606.0.0.315 - module316
1.3.6.1.4.1.11606.0.0.316 - module317
1.3.6.1.4.1.11606.0.0.317 - module318
1.3.6.1.4.1.11606.0.0.318 - module319
1.3.6.1.4.1.11606.0.0.319 - module320
1.3.6.1.4.1.11606.0.0.320 - module321
1.3.6.1.4.1.11606.0.0.321 - module322
1.3.6.1.4.1.11606.0.0.322 - module323
1.3.6.1.4.1.11606.0.0.323 - module324
1.3.6.1.4.1.11606.0.0.324 - module325
1.3.6.1.4.1.11606.0.0.325 - module326
1.3.6.1.4.1.11606.0.0.326 - module327
1.3.6.1.4.1.11606.0.0.327 - module328
1.3.6.1.4.1.11606.0.0.328 - module329
1.3.6.1.4.1.11606.0.0.329 - module330
1.3.6.1.4.1.11606.0.0.330 - module331
1.3.6.1.4.1.11606.0.0.331 - module35
1.3.6.1.4.1.11606.0.0.35 - module36
1.3.6.1.4.1.11606.0.0.36 - module37
1.3.6.1.4.1.11606.0.0.37 - module38
1.3.6.1.4.1.11606.0.0.38 - module39
1.3.6.1.4.1.11606.0.0.39 - module410
1.3.6.1.4.1.11606.0.0.410 - module411
1.3.6.1.4.1.11606.0.0.411 - module45
1.3.6.1.4.1.11606.0.0.45 - module46
1.3.6.1.4.1.11606.0.0.46 - module47
1.3.6.1.4.1.11606.0.0.47 - module48
1.3.6.1.4.1.11606.0.0.48 - module49
1.3.6.1.4.1.11606.0.0.49 - powerSupplyCoolingFanFailureA
1.3.6.1.4.1.11606.7.2.8.0.3 - powerSupplyCoolingFanFailureB
1.3.6.1.4.1.11606.7.2.8.0.4 - powerSupplyNoAlarmsPresent
1.3.6.1.4.1.11606.7.2.8.0.0 - powerSupplyPowerSupplyFailureA
1.3.6.1.4.1.11606.7.2.8.0.1 - powerSupplyPowerSupplyFailureB
1.3.6.1.4.1.11606.7.2.8.0.2 - transmitter2GHzSBSPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.15 - transmitter2GHzSBSPowerLow
1.3.6.1.4.1.11606.7.1.45.0.16 - transmitter6GHzSBSPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.17 - transmitter6GHzSBSPowerLow
1.3.6.1.4.1.11606.7.1.45.0.18 - transmitterAGCUnlocked
1.3.6.1.4.1.11606.7.1.45.0.12 - transmitterCommunicationFailure
1.3.6.1.4.1.11606.7.1.45.0.29 - transmitterCoolingFanAFailure
1.3.6.1.4.1.11606.7.1.45.0.32 - transmitterCoolingFanBFailure
1.3.6.1.4.1.11606.7.1.45.0.33 - transmitterInputRFLevelHigh
1.3.6.1.4.1.11606.7.1.45.0.7 - transmitterInputRFLevelLow
1.3.6.1.4.1.11606.7.1.45.0.8 - transmitterKeySwitchOffPosition
1.3.6.1.4.1.11606.7.1.45.0.13 - transmitterLaserCurrentHigh
1.3.6.1.4.1.11606.7.1.45.0.3 - transmitterLaserCurrentLow
1.3.6.1.4.1.11606.7.1.45.0.4 - transmitterLaserTemperatureHigh
1.3.6.1.4.1.11606.7.1.45.0.5 - transmitterLaserTemperatureLow
1.3.6.1.4.1.11606.7.1.45.0.6 - transmitterNoAlarmsPresent
1.3.6.1.4.1.11606.7.1.45.0.0 - transmitterOpticalPowerOutputHigh
1.3.6.1.4.1.11606.7.1.45.0.9 - transmitterOpticalPowerOutputLow
1.3.6.1.4.1.11606.7.1.45.0.10 - transmitterPowerSupplyAFailure
1.3.6.1.4.1.11606.7.1.45.0.30 - transmitterPowerSupplyBFailure
1.3.6.1.4.1.11606.7.1.45.0.31 - transmitterRemoteLaserOffMode
1.3.6.1.4.1.11606.7.1.45.0.14 - transmitterSystem12VPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.21 - transmitterSystem12VPowerLow
1.3.6.1.4.1.11606.7.1.45.0.22 - transmitterSystem24VPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.23 - transmitterSystem24VPowerLow
1.3.6.1.4.1.11606.7.1.45.0.24 - transmitterSystem5VPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.19 - transmitterSystem5VPowerLow
1.3.6.1.4.1.11606.7.1.45.0.20 - transmitterSystemM12VPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.27 - transmitterSystemM12VPowerLow
1.3.6.1.4.1.11606.7.1.45.0.28 - transmitterSystemM5VPowerHigh
1.3.6.1.4.1.11606.7.1.45.0.25 - transmitterSystemM5VPowerLow
1.3.6.1.4.1.11606.7.1.45.0.26 - transmitterSystemTemperatureHigh
1.3.6.1.4.1.11606.7.1.45.0.1 - transmitterSystemTemperatureLow
1.3.6.1.4.1.11606.7.1.45.0.2 - transmitterTECCurrentHigh
1.3.6.1.4.1.11606.7.1.45.0.11