PBI-4000P-5000P-MIB
DMH Softwareprivate infomation of 4000P&5000P
snmptranslate -m PBI-4000P-5000P-MIB -Tpsnmpwalk -v2c -c <community> -m PBI-4000P-5000P-MIB <host> 1.3.6.1.4.1.1070.3.1.1.104Imports
| PBI-MAIN-MIB | mg |
|---|---|
| PBI-MGSYSTEM-MIB | basicInfo |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ip4000-p5000 | 1.3.6.1.4.1.1070.3.1.1.104 | ||||||||||||
identity private infomation of 4000P&5000P | |||||||||||||
| NinputStatus | 1.3.6.1.4.1.1070.3.1.1.104.1 | ||||||||||||
| NtunerStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.1.1 | ||||||||||||
| StunerLock | 1.3.6.1.4.1.1070.3.1.1.104.1.1.1 | INTEGER | RO | 1 | |||||||||
scalar · INTEGER · read-only · current tuner Lock? yes: 1,no: 0 Example values from LibreNMS test devices
| |||||||||||||
| StunerPacketLen | 1.3.6.1.4.1.1070.3.1.1.104.1.1.2 | INTEGER | RO | 188 | |||||||||
scalar · INTEGER · read-only · current packet length: 188 or 204 Example values from LibreNMS test devices
| |||||||||||||
| StunerTotalBitrate | 1.3.6.1.4.1.1070.3.1.1.104.1.1.3 | INTEGER | RO | 59881760 | |||||||||
scalar · INTEGER · read-only · current total bit Rate size: from 0 to 100Mbps Example values from LibreNMS test devices
| |||||||||||||
| StunerValidBitrate | 1.3.6.1.4.1.1070.3.1.1.104.1.1.4 | INTEGER | RO | 41028400 | |||||||||
scalar · INTEGER · read-only · current valid Bit rate: from 0 to 100Mbps Example values from LibreNMS test devices
| |||||||||||||
| StunerQuality | 1.3.6.1.4.1.1070.3.1.1.104.1.1.5 | INTEGER | RO | 41028400 | |||||||||
scalar · INTEGER · read-only · current tuner quality signal monitoring Example values from LibreNMS test devices
| |||||||||||||
| StunerStrength | 1.3.6.1.4.1.1070.3.1.1.104.1.1.6 | INTEGER | RO | 360 | |||||||||
scalar · INTEGER · read-only · current tuner signal strength Example values from LibreNMS test devices
| |||||||||||||
| StunerBER | 1.3.6.1.4.1.1070.3.1.1.104.1.1.7 | INTEGER | RO | 8 | |||||||||
scalar · INTEGER · read-only · current tuner signal BER Example values from LibreNMS test devices
| |||||||||||||
| StunerCN | 1.3.6.1.4.1.1070.3.1.1.104.1.1.8 | INTEGER | RO | 163 | |||||||||
scalar · INTEGER · read-only · current tuner carrier noise Example values from LibreNMS test devices
| |||||||||||||
| StunerEbNo | 1.3.6.1.4.1.1070.3.1.1.104.1.1.9 | INTEGER | RO | 115 | |||||||||
scalar · INTEGER · read-only · current tuner Eb/No Example values from LibreNMS test devices
| |||||||||||||
| NasiStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.1.2 | ||||||||||||
| SasiLock | 1.3.6.1.4.1.1070.3.1.1.104.1.2.1 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current ASI Lock? yes: 1,no: 0 Example values from LibreNMS test devices
| |||||||||||||
| SasiPacketLen | 1.3.6.1.4.1.1070.3.1.1.104.1.2.2 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current packet length: 188 or 204 Example values from LibreNMS test devices
| |||||||||||||
| SasiTotalBitrate | 1.3.6.1.4.1.1070.3.1.1.104.1.2.3 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current total bit Rate size: from 0 to 100Mbps Example values from LibreNMS test devices
| |||||||||||||
| SasiValidBitrate | 1.3.6.1.4.1.1070.3.1.1.104.1.2.4 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current valid Bit rate: from 0 to 100Mbps Example values from LibreNMS test devices
| |||||||||||||
| SasiIndex | 1.3.6.1.4.1.1070.3.1.1.104.1.2.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify which ASI input | |||||||||||||
| NethernetInStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.1.3 | ||||||||||||
| SethernetInLock | 1.3.6.1.4.1.1070.3.1.1.104.1.3.1 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current DS3 Lock? yes: 1,no: 0 Example values from LibreNMS test devices
| |||||||||||||
| SethernetInPacketLen | 1.3.6.1.4.1.1070.3.1.1.104.1.3.2 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current packet length: 188 or 204 Example values from LibreNMS test devices
| |||||||||||||
| SethernetInTotalBitrate | 1.3.6.1.4.1.1070.3.1.1.104.1.3.3 | INTEGER | RO | 0 | |||||||||
scalar · INTEGER · read-only · current total bit Rate size: from 0 to 100Mbps Example values from LibreNMS test devices
| |||||||||||||
| SlinkStatus | 1.3.6.1.4.1.1070.3.1.1.104.1.3.4 | INTEGER | RO | 2 | |||||||||
scalar · INTEGER · read-only · current 0:none, 1:10M, 2:100M Example values from LibreNMS test devices
| |||||||||||||
| NtunerType | 1.3.6.1.4.1.1070.3.1.1.104.2 | ||||||||||||
| StypeSel | 1.3.6.1.4.1.1070.3.1.1.104.2.1 | INTEGER | RO | 1 | |||||||||
scalar · INTEGER · read-only · current tuner type Example values from LibreNMS test devices
| |||||||||||||
| Schannel | 1.3.6.1.4.1.1070.3.1.1.104.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current tuner channel | |||||||||||||
| Ntuner-sInput | 1.3.6.1.4.1.1070.3.1.1.104.3 | ||||||||||||
| SlnbFrequency defined twice | 1.3.6.1.4.1.1070.3.1.1.104.3.1 | INTEGER | RW | 10600 | |||||||||
scalar · INTEGER · read-write · current LNB frequency Example values from LibreNMS test devices
| |||||||||||||
| SsatFrequency defined twice | 1.3.6.1.4.1.1070.3.1.1.104.3.2 | INTEGER | RW | 12109 | |||||||||
| SsymbolRate defined twice | 1.3.6.1.4.1.1070.3.1.1.104.3.3 | INTEGER | RW | 28000 | |||||||||
scalar · INTEGER · read-write · current Tuner symbol rate in symbols per second,its value range: from 0kb/s to 45000kb/s Example values from LibreNMS test devices
| |||||||||||||
| SlnbVoltage defined twice | 1.3.6.1.4.1.1070.3.1.1.104.3.4 | INTEGER | RW | 2 | |||||||||
| Slnb22KHz defined twice | 1.3.6.1.4.1.1070.3.1.1.104.3.5 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current Tuner 22 KHz, option: off or on Example values from LibreNMS test devices
| |||||||||||||
| Sdiseqc | 1.3.6.1.4.1.1070.3.1.1.104.3.6 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Tuner diseqc, option: 0:DisEqc Offˇ˘1:PortAˇ˘2:PortBˇ˘3:PortCˇ˘4:PortD Example values from LibreNMS test devices
| |||||||||||||
| Ntuner-cInput | 1.3.6.1.4.1.1070.3.1.1.104.4 | ||||||||||||
| Sconstellation | 1.3.6.1.4.1.1070.3.1.1.104.4.1 | INTEGER | RW | 2 | |||||||||
scalar · INTEGER · read-write · current LNB frequency Example values from LibreNMS test devices
| |||||||||||||
| ScableFrequency | 1.3.6.1.4.1.1070.3.1.1.104.4.2 | INTEGER | RW | 50000 | |||||||||
scalar · INTEGER · read-write · current Cable frequency, its value range: from 48000KHz to 862000KHz Example values from LibreNMS test devices
| |||||||||||||
| ScableSymbolRate | 1.3.6.1.4.1.1070.3.1.1.104.4.3 | INTEGER | RW | 6875 | |||||||||
scalar · INTEGER · read-write · current The symbol rate in symbols per second, its value range: from 2000kb/s to 7000kb/s Example values from LibreNMS test devices
| |||||||||||||
| Ntuner-tInput | 1.3.6.1.4.1.1070.3.1.1.104.5 | ||||||||||||
| SterFrequency | 1.3.6.1.4.1.1070.3.1.1.104.5.1 | INTEGER | RW | 794000 | |||||||||
scalar · INTEGER · read-write · current terrestrial frequency: its value range: from 0kb/s to 1000000kb/s Example values from LibreNMS test devices
| |||||||||||||
| SbandWidth | 1.3.6.1.4.1.1070.3.1.1.104.5.2 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current terrestrial band width,option: 0-6MHz; 1-7MHz; 2-8MHz Example values from LibreNMS test devices
| |||||||||||||
| NoutputSel | 1.3.6.1.4.1.1070.3.1.1.104.6 | ||||||||||||
| Soutput2sel | 1.3.6.1.4.1.1070.3.1.1.104.6.1 | INTEGER | RW | 2 | |||||||||
scalar · INTEGER · read-write · current output 2 select Example values from LibreNMS test devices
| |||||||||||||
| SdecoderOutChannel | 1.3.6.1.4.1.1070.3.1.1.104.6.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify decoder out channel | |||||||||||||
| SciOutChannel | 1.3.6.1.4.1.1070.3.1.1.104.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify ci out channel | |||||||||||||
| SfilterOutChannel | 1.3.6.1.4.1.1070.3.1.1.104.6.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify filter out channel | |||||||||||||
| SmuxOutChannel | 1.3.6.1.4.1.1070.3.1.1.104.6.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify mux out channel | |||||||||||||
| NasiOutput | 1.3.6.1.4.1.1070.3.1.1.104.7 | ||||||||||||
| Nasi1OutputEntry | 1.3.6.1.4.1.1070.3.1.1.104.7.1 | ||||||||||||
| SsourceSel1 | 1.3.6.1.4.1.1070.3.1.1.104.7.1.1 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current select source, qpsk:0, asi:1, ds3:2 Example values from LibreNMS test devices
| |||||||||||||
| SpackageLength1 | 1.3.6.1.4.1.1070.3.1.1.104.7.1.2 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current package lengh, 188 or 204 Example values from LibreNMS test devices
| |||||||||||||
| SoutBitRate defined twice | 1.3.6.1.4.1.1070.3.1.1.104.7.1.3 | INTEGER | RW | 50000 | |||||||||
scalar · INTEGER · read-write · current out BitRate, range: from 0~150000Kbps Example values from LibreNMS test devices
| |||||||||||||
| SmuxType | 1.3.6.1.4.1.1070.3.1.1.104.7.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current set Mux Type,option: 0:ASI TV,QPSK EMM CAT; 1:ASI TV,IP EMM; 2:ASI TV,IP EMM CAT; 3:QPSK TV,ASI EMM CAT; 4:QPSK TV,IP EMM CAT | |||||||||||||
| Nasi2OutputEntry | 1.3.6.1.4.1.1070.3.1.1.104.7.2 | ||||||||||||
| SsourceSel2 | 1.3.6.1.4.1.1070.3.1.1.104.7.2.1 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current select source, qpsk:0, asi:1, ds3:2 Example values from LibreNMS test devices
| |||||||||||||
| SpackageLength2 | 1.3.6.1.4.1.1070.3.1.1.104.7.2.2 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current package lengh, 188 or 204 Example values from LibreNMS test devices
| |||||||||||||
| NsdiOutput | 1.3.6.1.4.1.1070.3.1.1.104.8 | ||||||||||||
| SaudioDID | 1.3.6.1.4.1.1070.3.1.1.104.8.1 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current options: group 1, group 2, group 3, group 4 Example values from LibreNMS test devices
| |||||||||||||
| SembAudios | 1.3.6.1.4.1.1070.3.1.1.104.8.2 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current options: none, one, two, one&two Example values from LibreNMS test devices
| |||||||||||||
| NdecoderOutput | 1.3.6.1.4.1.1070.3.1.1.104.9 | ||||||||||||
| NprogramOutputEntry | 1.3.6.1.4.1.1070.3.1.1.104.9.1 | ||||||||||||
| SinputChannel | 1.3.6.1.4.1.1070.3.1.1.104.9.1.1 | INTEGER | RW | 3 | |||||||||
scalar · INTEGER · read-write · current options: qpsk, asi, ds3 Example values from LibreNMS test devices
| |||||||||||||
| SprogramNumber | 1.3.6.1.4.1.1070.3.1.1.104.9.1.2 | DisplayString | RW | 32798309 | |||||||||
scalar · DisplayString · read-write · current select a program to 4000P and decode it, Example values from LibreNMS test devices
| |||||||||||||
| NvideoOutputEntry | 1.3.6.1.4.1.1070.3.1.1.104.9.2 | ||||||||||||
| SvideoStandard | 1.3.6.1.4.1.1070.3.1.1.104.9.2.1 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Decoder status 4 modes :PAL/AUTO/SECAM/NTSC Example values from LibreNMS test devices
| |||||||||||||
| Sscreen | 1.3.6.1.4.1.1070.3.1.1.104.9.2.2 | INTEGER | RW | 66819 | |||||||||
scalar · INTEGER · read-write · current Decoder status screen display: 4:3 Letterbox/4:3 Full/16:9 Full Example values from LibreNMS test devices
| |||||||||||||
| SdvbSubtitleLang | 1.3.6.1.4.1.1070.3.1.1.104.9.2.3 | DisplayString | RW | 65:6e:67:00:00:00:00:00 | |||||||||
scalar · DisplayString · read-write · current Decoder status DVB subtitle language 3 characters Example values from LibreNMS test devices
| |||||||||||||
| SebuSubtitleLang | 1.3.6.1.4.1.1070.3.1.1.104.9.2.4 | DisplayString | RW | 4f:66:66:00:00:00 | |||||||||
scalar · DisplayString · read-write · current Decoder status EBU subtitle language 3 characters Example values from LibreNMS test devices
| |||||||||||||
| SsubtitlePriority | 1.3.6.1.4.1.1070.3.1.1.104.9.2.5 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Decoder status subtitle priority: EBU First/DVB first Example values from LibreNMS test devices
| |||||||||||||
| SfailMode | 1.3.6.1.4.1.1070.3.1.1.104.9.2.6 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Video Fail Mode,option:Black Screen=0,Still Picture=1,No Sync=2 Example values from LibreNMS test devices
| |||||||||||||
| SdvbSubtitleLangEnable | 1.3.6.1.4.1.1070.3.1.1.104.9.2.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Decoder status DVB subtitle language enable: 0-off, 1-on | |||||||||||||
| SebuSubtitleLangEnable | 1.3.6.1.4.1.1070.3.1.1.104.9.2.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Decoder status EBU subtitle language enable: 0-off, 1-on | |||||||||||||
| ScloseCaption | 1.3.6.1.4.1.1070.3.1.1.104.9.2.9 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current video close caption,option: 0-off, 1-on Example values from LibreNMS test devices
| |||||||||||||
| SvideoOutAlarmEn | 1.3.6.1.4.1.1070.3.1.1.104.9.2.10 | INTEGER | RW | disable(0) | |||||||||
scalar · INTEGER · read-write · current Video Out Alarm On/Off Setting
Example values from LibreNMS test devices
| |||||||||||||
| SvbiMode | 1.3.6.1.4.1.1070.3.1.1.104.9.2.11 | INTEGER | RW | enable(1) | |||||||||
scalar · INTEGER · read-write · current Video Output VBI Mode Setting
Example values from LibreNMS test devices
| |||||||||||||
| ScvbsPAL | 1.3.6.1.4.1.1070.3.1.1.104.9.2.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current video output CVBS PAL Setting, for example, PALBDGHI, PALN, PALN_C, SECAM | |||||||||||||
| ScvbsNTSC | 1.3.6.1.4.1.1070.3.1.1.104.9.2.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current video output CVBS NTSC Setting, for example, NTSCM, NTSCM_J, NTSCM_443, PALM | |||||||||||||
| SvideoOutputStatus | 1.3.6.1.4.1.1070.3.1.1.104.9.2.14 | DisplayString | RO | Video:Ok | |||||||||
scalar · DisplayString · read-only · current show video output status Example values from LibreNMS test devices
| |||||||||||||
| NaudioOutputEntry | 1.3.6.1.4.1.1070.3.1.1.104.9.3 | ||||||||||||
| SaudioLevel | 1.3.6.1.4.1.1070.3.1.1.104.9.3.1 | INTEGER | RW | 49 | |||||||||
scalar · INTEGER · read-write · current Decoder status audio level: from 0 to 99 Example values from LibreNMS test devices
| |||||||||||||
| SaudioModulation | 1.3.6.1.4.1.1070.3.1.1.104.9.3.2 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Decoder status audio modulation: stereo/left/right/mono Example values from LibreNMS test devices
| |||||||||||||
| SaudioLang | 1.3.6.1.4.1.1070.3.1.1.104.9.3.3 | DisplayString | RW | hun0510 | |||||||||
scalar · DisplayString · read-write · current Decoder status audio language 3 characters Example values from LibreNMS test devices
| |||||||||||||
| SaudioOutAlarmEn | 1.3.6.1.4.1.1070.3.1.1.104.9.3.4 | INTEGER | RW | disable(0) | |||||||||
scalar · INTEGER · read-write · current Audio Out Alarm On/Off Setting
Example values from LibreNMS test devices
| |||||||||||||
| SaudioOutIndex | 1.3.6.1.4.1.1070.3.1.1.104.9.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify which audio output | |||||||||||||
| SaudioOutputStatus | 1.3.6.1.4.1.1070.3.1.1.104.9.3.6 | DisplayString | RO | Audio:Ok | |||||||||
scalar · DisplayString · read-only · current show audio output status Example values from LibreNMS test devices
| |||||||||||||
| NbissEntry | 1.3.6.1.4.1.1070.3.1.1.104.9.4 | ||||||||||||
| SbissMode | 1.3.6.1.4.1.1070.3.1.1.104.9.4.1 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current biss mode, 0:biss 1, 1:biss E Example values from LibreNMS test devices
| |||||||||||||
| Sbiss1Key | 1.3.6.1.4.1.1070.3.1.1.104.9.4.2 | DisplayString (SIZE (0..12)) | RW | 00:00:00:00:00:00:00:00:00:00:00:00 | |||||||||
scalar · DisplayString (SIZE (0..12)) · read-write · current the key of biss 1 Example values from LibreNMS test devices
| |||||||||||||
| SbissEKey | 1.3.6.1.4.1.1070.3.1.1.104.9.4.3 | DisplayString (SIZE (0..16)) | RW | 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 | |||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · current the key of biss E Example values from LibreNMS test devices
| |||||||||||||
| SbissEId | 1.3.6.1.4.1.1070.3.1.1.104.9.4.4 | DisplayString (SIZE (0..14)) | RW | 00:00:00:00:00:00:00:00:00:00:00:00:00:00 | |||||||||
scalar · DisplayString (SIZE (0..14)) · read-write · current the id of biss E Example values from LibreNMS test devices
| |||||||||||||
| SbissSource | 1.3.6.1.4.1.1070.3.1.1.104.9.4.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current the source of biss, it include ASI1ˇ˘Tunerˇ˘IP In(option)ˇ˘CIˇ˘ASI2ˇ˘Mux TS(option) | |||||||||||||
| SbissProgram | 1.3.6.1.4.1.1070.3.1.1.104.9.4.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current the program number of descramble program according to biss,a program number occupy 2 bytes | |||||||||||||
| NdecoderSelection | 1.3.6.1.4.1.1070.3.1.1.104.9.5 | ||||||||||||
| SdecoderMode | 1.3.6.1.4.1.1070.3.1.1.104.9.5.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Decoder Mode Setting, it include manualˇ˘auto
| |||||||||||||
| NethernetOutput | 1.3.6.1.4.1.1070.3.1.1.104.10 | ||||||||||||
| SipAddress | 1.3.6.1.4.1.1070.3.1.1.104.10.1 | IpAddress | RW | 10.3.0.143 | |||||||||
scalar · IpAddress · read-write · current ethernet output ip address Example values from LibreNMS test devices
| |||||||||||||
| SstreamUDPPort | 1.3.6.1.4.1.1070.3.1.1.104.10.2 | INTEGER | RW | 2000 | |||||||||
scalar · INTEGER · read-write · current ethernet output stream UDP port Example values from LibreNMS test devices
| |||||||||||||
| SmulticastIPAddress defined twice | 1.3.6.1.4.1.1070.3.1.1.104.10.3 | IpAddress | RW | 225.1.1.1 | |||||||||
| StsPacketPerUDP | 1.3.6.1.4.1.1070.3.1.1.104.10.4 | INTEGER | RW | 7 | |||||||||
scalar · INTEGER · read-write · current ethernet output TS packets per UDP Example values from LibreNMS test devices
| |||||||||||||
| Sttl | 1.3.6.1.4.1.1070.3.1.1.104.10.5 | INTEGER | RW | 10 | |||||||||
scalar · INTEGER · read-write · current ethernet output ttl Example values from LibreNMS test devices
| |||||||||||||
| SsourceNetmask | 1.3.6.1.4.1.1070.3.1.1.104.10.6 | IpAddress | RW | 255.255.255.0 | |||||||||
scalar · IpAddress · read-write · current External board netmask Example values from LibreNMS test devices
| |||||||||||||
| SsourceGateway | 1.3.6.1.4.1.1070.3.1.1.104.10.7 | IpAddress | RW | 10.3.0.1 | |||||||||
scalar · IpAddress · read-write · current External board gateway Example values from LibreNMS test devices
| |||||||||||||
| SsourceMac | 1.3.6.1.4.1.1070.3.1.1.104.10.8 | DisplayString (SIZE (0..255)) | RW | 00:0e:26:ff:ba:39 | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current External board mac Example values from LibreNMS test devices
| |||||||||||||
| SmultiUDPPort | 1.3.6.1.4.1.1070.3.1.1.104.10.9 | INTEGER | RW | 3000 | |||||||||
scalar · INTEGER · read-write · current Multicast port Example values from LibreNMS test devices
| |||||||||||||
| Sprotocol defined twice | 1.3.6.1.4.1.1070.3.1.1.104.10.10 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current 0 udp; 1 trp; Example values from LibreNMS test devices
| |||||||||||||
| StypeService | 1.3.6.1.4.1.1070.3.1.1.104.10.11 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current 5 type: 0 normal; 1 min delay; 2 max throughput; 3 max reliability; 4 min monetary cost Example values from LibreNMS test devices
| |||||||||||||
| Ssource defined twice | 1.3.6.1.4.1.1070.3.1.1.104.10.12 | INTEGER | RW | 3 | |||||||||
scalar · INTEGER · read-write · current 4 types: 0 asi; 1 tuner; 2 ds3; 3 CI Example values from LibreNMS test devices
| |||||||||||||
| Smode | 1.3.6.1.4.1.1070.3.1.1.104.10.13 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current mode:DVB, IPTV Example values from LibreNMS test devices
| |||||||||||||
| SmaxChannel | 1.3.6.1.4.1.1070.3.1.1.104.10.14 | INTEGER | RO | 6 | |||||||||
scalar · INTEGER · read-only · current when mode is IPTV, hardware sustain max channel Example values from LibreNMS test devices
| |||||||||||||
| ScurMaxChannel | 1.3.6.1.4.1.1070.3.1.1.104.10.15 | INTEGER | RW | 6 | |||||||||
scalar · INTEGER · read-write · current when mode is IPTV, device can output channel number most currently Example values from LibreNMS test devices
| |||||||||||||
| SchannelInput | 1.3.6.1.4.1.1070.3.1.1.104.10.16 | INTEGER | RW | 5 | |||||||||
scalar · INTEGER · read-write · current when mode is IPTV, input channel number currently Example values from LibreNMS test devices
| |||||||||||||
| SmulticastValues | 1.3.6.1.4.1.1070.3.1.1.104.10.17 | DisplayString | RW | 00:ef:01:4e:08:d2:04:00:00:d5:07:00:00:00:00 | |||||||||
scalar · DisplayString · read-write · current when mode is IPTV, the value of multicast Example values from LibreNMS test devices
| |||||||||||||
| SgatewayMac | 1.3.6.1.4.1.1070.3.1.1.104.10.18 | DisplayString | RW | ff:ff:ff:ff:ff:ff | |||||||||
scalar · DisplayString · read-write · current the gatewat mac address, example: 44:45:53:54:00:00 Example values from LibreNMS test devices
| |||||||||||||
| ShighTargetMac | 1.3.6.1.4.1.1070.3.1.1.104.10.19 | DisplayString | RW | 34:12:00:00:46:3a:46:46:3a:46:46:3a:46:46:3a:46… | |||||||||
scalar · DisplayString · read-write · current when mode is IPTV, it denote all multicast channel's target mac, only save high 32bit, one channel occupy 4 bytes Example values from LibreNMS test devices
| |||||||||||||
| SlowTargetMac | 1.3.6.1.4.1.1070.3.1.1.104.10.20 | DisplayString | RW | 56:22:00:00:46:3a:00:00:3a:46:00:00:46:46:00:00… | |||||||||
scalar · DisplayString · read-write · current when mode is IPTV, it denote all multicast channel's target mac, only save target mac's low 16bit, one channel occupy 4 bytes, latter 2 bytes is effective Example values from LibreNMS test devices
| |||||||||||||
| StargetMac4Dvb | 1.3.6.1.4.1.1070.3.1.1.104.10.21 | DisplayString | RW | 00:00:12:34:22:56 | |||||||||
scalar · DisplayString · read-write · current when mode is DVB, the target mac address, example: 44:45:53:54:00:00 Example values from LibreNMS test devices
| |||||||||||||
| Sswitch4Dvb | 1.3.6.1.4.1.1070.3.1.1.104.10.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current switch control for IP Output of DVB mode | |||||||||||||
| NciOutput | 1.3.6.1.4.1.1070.3.1.1.104.11 | ||||||||||||
| SciSource | 1.3.6.1.4.1.1070.3.1.1.104.11.1 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current CI output source Example values from LibreNMS test devices
| |||||||||||||
| SciCount1 | 1.3.6.1.4.1.1070.3.1.1.104.11.2 | INTEGER | RW | 14 | |||||||||
scalar · INTEGER · read-write · current CI1 output program counts Example values from LibreNMS test devices
| |||||||||||||
| SciProgramNumber1 | 1.3.6.1.4.1.1070.3.1.1.104.11.3 | DisplayString (SIZE (0..1024)) | RW | ^vev | |||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current CI1 output program numbers,it is a array Example values from LibreNMS test devices
| |||||||||||||
| SciCount2 | 1.3.6.1.4.1.1070.3.1.1.104.11.4 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current CI2 output program counts Example values from LibreNMS test devices
| |||||||||||||
| SciProgramNumber2 | 1.3.6.1.4.1.1070.3.1.1.104.11.5 | DisplayString (SIZE (0..1024)) | RW | | |||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current CI2 output program numbers,it is a array Example values from LibreNMS test devices
| |||||||||||||
| SciLock | 1.3.6.1.4.1.1070.3.1.1.104.11.6 | INTEGER | RO | 1 | |||||||||
scalar · INTEGER · read-only · current CI Lock? yes: 1,no: 0 Example values from LibreNMS test devices
| |||||||||||||
| SciMenuNode | 1.3.6.1.4.1.1070.3.1.1.104.11.7 | DisplayString (SIZE (0..1024)) | RW | | |||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current which node in ci menu Example values from LibreNMS test devices
| |||||||||||||
| SciMenuNodeInfo | 1.3.6.1.4.1.1070.3.1.1.104.11.8 | DisplayString (SIZE (0..1024)) | RW | | |||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current the node values in ci menu Example values from LibreNMS test devices
| |||||||||||||
| SciSlot1Status | 1.3.6.1.4.1.1070.3.1.1.104.11.9 | DisplayString (SIZE (0..255)) | RO | 02:43:72:79:70:74:6f:77:6f:72:6b:73 | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current the status of slot1,if slot1 has card,then return the name of card,else return string whose length is zero-length Example values from LibreNMS test devices
| |||||||||||||
| SciSlot2Status | 1.3.6.1.4.1.1070.3.1.1.104.11.10 | DisplayString (SIZE (0..255)) | RO | 01 | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current the status of slot2,if slot2 has card,then return the name of card,else return string whose length is zero-length Example values from LibreNMS test devices
| |||||||||||||
| NoutputStatus | 1.3.6.1.4.1.1070.3.1.1.104.12 | ||||||||||||
| NasiOutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.1 | ||||||||||||
| SasiStatus | 1.3.6.1.4.1.1070.3.1.1.104.12.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current ASI status | |||||||||||||
| NsdiOutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.2 | ||||||||||||
| SsdiStatus | 1.3.6.1.4.1.1070.3.1.1.104.12.2.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current SDI status | |||||||||||||
| Nds3OutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.3 | ||||||||||||
| Sds3Status | 1.3.6.1.4.1.1070.3.1.1.104.12.3.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current DS3 status | |||||||||||||
| NdecoderOutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.4 | ||||||||||||
| NethernetOutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.5 | ||||||||||||
| SethernetStatus | 1.3.6.1.4.1.1070.3.1.1.104.12.5.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Ethernet status | |||||||||||||
| NciOutputStatusEntry | 1.3.6.1.4.1.1070.3.1.1.104.12.6 | ||||||||||||
| SciStatus | 1.3.6.1.4.1.1070.3.1.1.104.12.6.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current CI status | |||||||||||||
| NethernetInput | 1.3.6.1.4.1.1070.3.1.1.104.13 | ||||||||||||
| SstreamIPAddress | 1.3.6.1.4.1.1070.3.1.1.104.13.1 | IpAddress | RW | 10.3.0.143 | |||||||||
scalar · IpAddress · read-write · current ethernet input ip address Example values from LibreNMS test devices
| |||||||||||||
| SstreamNetmask | 1.3.6.1.4.1.1070.3.1.1.104.13.2 | IpAddress | RW | 255.255.255.0 | |||||||||
scalar · IpAddress · read-write · current External board Input netmask Example values from LibreNMS test devices
| |||||||||||||
| SstreamGateway | 1.3.6.1.4.1.1070.3.1.1.104.13.3 | IpAddress | RW | 10.3.0.1 | |||||||||
scalar · IpAddress · read-write · current External board Input gateway Example values from LibreNMS test devices
| |||||||||||||
| SstreamMacAddress | 1.3.6.1.4.1.1070.3.1.1.104.13.4 | DisplayString (SIZE (0..255)) | RO | 00:0e:26:ff:ba:39 | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current External board Input mac Example values from LibreNMS test devices
| |||||||||||||
| SmulticastIPAddress defined twice | 1.3.6.1.4.1.1070.3.1.1.104.13.5 | IpAddress | RW | 225.1.1.1 | |||||||||
| SmulticastUDPPort | 1.3.6.1.4.1.1070.3.1.1.104.13.6 | INTEGER | RW | 3000 | |||||||||
scalar · INTEGER · read-write · current Multicast port:0~65535 Example values from LibreNMS test devices
| |||||||||||||
| Sprotocol defined twice | 1.3.6.1.4.1.1070.3.1.1.104.13.7 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current 0 udp; 1 trp; Example values from LibreNMS test devices
| |||||||||||||
| SoutputSmoothing | 1.3.6.1.4.1.1070.3.1.1.104.13.8 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current 0:Auto, 1:Fixed Rate, 2:Disable Example values from LibreNMS test devices
| |||||||||||||
| StsBitRate | 1.3.6.1.4.1.1070.3.1.1.104.13.9 | INTEGER | RW | 38000 | |||||||||
scalar · INTEGER · read-write · current input TS BitRate,from 0M~99M Example values from LibreNMS test devices
| |||||||||||||
| Ns2Input | 1.3.6.1.4.1.1070.3.1.1.104.14 | ||||||||||||
| SlnbFrequency defined twice | 1.3.6.1.4.1.1070.3.1.1.104.14.1 | INTEGER | RW | 10600 | |||||||||
scalar · INTEGER · read-write · current LNB frequency Example values from LibreNMS test devices
| |||||||||||||
| SsatFrequency defined twice | 1.3.6.1.4.1.1070.3.1.1.104.14.2 | INTEGER | RW | 12109 | |||||||||
| SsymbolRate defined twice | 1.3.6.1.4.1.1070.3.1.1.104.14.3 | INTEGER | RW | 28000 | |||||||||
scalar · INTEGER · read-write · current Tuner symbol rate in symbols per second,its value range: from 0kb/s to 45000kb/s Example values from LibreNMS test devices
| |||||||||||||
| SlnbVoltage defined twice | 1.3.6.1.4.1.1070.3.1.1.104.14.4 | INTEGER | RW | 2 | |||||||||
| Slnb22KHz defined twice | 1.3.6.1.4.1.1070.3.1.1.104.14.5 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current Tuner 22 KHz, option: off or on Example values from LibreNMS test devices
| |||||||||||||
| SdemodulatorMode | 1.3.6.1.4.1.1070.3.1.1.104.14.6 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current DVB_S2 demodulator mode, option: DVB-Sˇ˘DVB-S2, parameter: 0,1 Example values from LibreNMS test devices
| |||||||||||||
| SoperationMode | 1.3.6.1.4.1.1070.3.1.1.104.14.7 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current RX operation mode, option: QPSK 1/2ˇ˘QPSK 2/3ˇ˘QPSK 3/4ˇ˘QPSK 3/5ˇ˘QPSK 4/5ˇ˘QPSK 5/6ˇ˘QPSK 8/9ˇ˘QPSK 9/10ˇ˘8PSK 2/3ˇ˘8PSK 3/4ˇ˘8PSK 3/5ˇ˘8PSK 5/6ˇ˘8PSK 8/9ˇ˘8PSK 9/10, parameter: 0ˇ˘1ˇ˘2ˇ˘3ˇ˘4ˇ˘5ˇ˘6ˇ˘7ˇ˘8ˇ˘9ˇ˘10ˇ˘11ˇ˘12ˇ˘13 Example values from LibreNMS test devices
| |||||||||||||
| Spilot | 1.3.6.1.4.1.1070.3.1.1.104.14.8 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current pilot OPT, option: offˇ˘on, parameter: 0, 1 Example values from LibreNMS test devices
| |||||||||||||
| Sroll-OffFactor | 1.3.6.1.4.1.1070.3.1.1.104.14.9 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current Roll off OPT, option: 0.2ˇ˘0.25ˇ˘0.35, parameter: 0, 1, 2 Example values from LibreNMS test devices
| |||||||||||||
| SdisEqc | 1.3.6.1.4.1.1070.3.1.1.104.14.10 | INTEGER | RW | off(0) | |||||||||
scalar · INTEGER · read-write · current tuner disEqc setting
Example values from LibreNMS test devices
| |||||||||||||
| NfunctionAdd | 1.3.6.1.4.1.1070.3.1.1.104.15 | ||||||||||||
| SfunctionSelect | 1.3.6.1.4.1.1070.3.1.1.104.15.1 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current function select,option:0:null;1:filter;2:multiplexer Example values from LibreNMS test devices
| |||||||||||||
| NfilterSetup | 1.3.6.1.4.1.1070.3.1.1.104.16 | ||||||||||||
| SfilterChannel | 1.3.6.1.4.1.1070.3.1.1.104.16.1 | INTEGER | RW | 0 | |||||||||
scalar · INTEGER · read-write · current filter channel,option:0:ASI;1:Tuner;2:IP In;3:CI Example values from LibreNMS test devices
| |||||||||||||
| SfilterSection | 1.3.6.1.4.1.1070.3.1.1.104.16.2 | DisplayString | RW | | |||||||||
scalar · DisplayString · read-write · current set filter section to Agent,format:old program number,old program number...,every parameter size is 2Byte Example values from LibreNMS test devices
| |||||||||||||
| SfilterFunctionControl | 1.3.6.1.4.1.1070.3.1.1.104.16.3 | INTEGER | RW | 1 | |||||||||
scalar · INTEGER · read-write · current set filter function control,off:0;on:1 Example values from LibreNMS test devices
| |||||||||||||
| SoutBitRate defined twice | 1.3.6.1.4.1.1070.3.1.1.104.16.4 | INTEGER | RW | 50000 | |||||||||
scalar · INTEGER · read-write · current out BitRate, range: from 0~150000Kbps Example values from LibreNMS test devices
| |||||||||||||
| NmultiplexSetup | 1.3.6.1.4.1.1070.3.1.1.104.17 | ||||||||||||
| SprogramNumberContrast | 1.3.6.1.4.1.1070.3.1.1.104.17.1 | DisplayString | RW | | |||||||||
scalar · DisplayString · read-write · current set program number contrast to Agent,format:channel,old program number,new program number,channel,old program number,new program number...,every parameter size is 2Byte Example values from LibreNMS test devices
| |||||||||||||
| SpidContrast | 1.3.6.1.4.1.1070.3.1.1.104.17.2 | DisplayString | RW | | |||||||||
scalar · DisplayString · read-write · current set All PID contrast to Agent,format:channel,old PMT PID,new PMT PID,channel,old PCR PID,new PCR PID...,every parameter size is 2Byte Example values from LibreNMS test devices
| |||||||||||||
| ScatSection | 1.3.6.1.4.1.1070.3.1.1.104.17.3 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current set new CAT section to Agent,The transport stream Relating to the CAT seciton, reference ISO/IEC 13818-1 | |||||||||||||
| SsdtSection | 1.3.6.1.4.1.1070.3.1.1.104.17.4 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current set new SDT section to Agent,The transport stream Relating to the SDT seciton, reference DVB 300-468 | |||||||||||||
| SpmtSection | 1.3.6.1.4.1.1070.3.1.1.104.17.5 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current set new PMT section to Agent,The transport stream Relating to the PMT seciton, reference ISO/IEC 13818-1 | |||||||||||||
| SnitActualSection | 1.3.6.1.4.1.1070.3.1.1.104.17.6 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current Relating to the Actual section, its table ID is 0x40 in NIT,reference DVB 300-468 | |||||||||||||
| SmxApply | 1.3.6.1.4.1.1070.3.1.1.104.17.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Send multiplexing command: send 1 to multiplexing | |||||||||||||
| SmxFunctionControl | 1.3.6.1.4.1.1070.3.1.1.104.17.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current set mux function control,off:0;on:1 | |||||||||||||
| SoutBitRate defined twice | 1.3.6.1.4.1.1070.3.1.1.104.17.9 | INTEGER | RW | 50000 | |||||||||
scalar · INTEGER · read-write · current out BitRate, range: from 0~150000Kbps Example values from LibreNMS test devices
| |||||||||||||
| SoutTSID | 1.3.6.1.4.1.1070.3.1.1.104.17.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current set out TS ID,range:from 0~65535 | |||||||||||||
| SghostSection | 1.3.6.1.4.1.1070.3.1.1.104.17.11 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current set Ghost section to Agent,The transport stream Relating to the Ghost seciton, reference ISO/IEC 13818-1 | |||||||||||||
| SoriginalNetworkId | 1.3.6.1.4.1.1070.3.1.1.104.17.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current set Original Network ID,range:from 0~65535 | |||||||||||||
| SmuxOverFlowPercent | 1.3.6.1.4.1.1070.3.1.1.104.17.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current mux overflow percent, range =(0-100). | |||||||||||||
| Nds3Input | 1.3.6.1.4.1.1070.3.1.1.104.18 | ||||||||||||
| Sds3InputType | 1.3.6.1.4.1.1070.3.1.1.104.18.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current set DS3 Input Type, 0:Deinterleave; 1:Normal | |||||||||||||
| NcmOutput | 1.3.6.1.4.1.1070.3.1.1.104.20 | ||||||||||||
| SqamOrder | 1.3.6.1.4.1.1070.3.1.1.104.20.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current QAM modulate mode,option:QPSKˇ˘16QAMˇ˘64QAM | |||||||||||||
| SbandWidths | 1.3.6.1.4.1.1070.3.1.1.104.20.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current band width,option:6Mˇ˘7Mˇ˘8M | |||||||||||||
| Sfec | 1.3.6.1.4.1.1070.3.1.1.104.20.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current forward error correction,option: 1/2, 2/3, 3/4, 5/6, 7/8 | |||||||||||||
| SguardInterval | 1.3.6.1.4.1.1070.3.1.1.104.20.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current guard interval,option: 1/32,1/16,1/8,1/4 | |||||||||||||
| Smodulation | 1.3.6.1.4.1.1070.3.1.1.104.20.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current carrier modulate,option: off,on | |||||||||||||
| SrfFrequency | 1.3.6.1.4.1.1070.3.1.1.104.20.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current RF Frequency,from 48MHz~865MHz | |||||||||||||
| Sspec | 1.3.6.1.4.1.1070.3.1.1.104.20.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current spectrum inversion,option: normal,invert | |||||||||||||
| Sattenuation | 1.3.6.1.4.1.1070.3.1.1.104.20.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current RF attenuation,from 0db~18db | |||||||||||||
| Ssource defined twice | 1.3.6.1.4.1.1070.3.1.1.104.20.9 | INTEGER | RW | 3 | |||||||||
scalar · INTEGER · read-write · current 4 types: 0 asi; 1 tuner; 2 ds3; 3 CI Example values from LibreNMS test devices
| |||||||||||||
| ScmOutStatus | 1.3.6.1.4.1.1070.3.1.1.104.20.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current the status of cm output, 0:normal, 1:overflow, 2:no sync | |||||||||||||
| NbackupSetting | 1.3.6.1.4.1.1070.3.1.1.104.21 | ||||||||||||
| SbackupEnable | 1.3.6.1.4.1.1070.3.1.1.104.21.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current backup function switch | |||||||||||||
| SmainInputSource | 1.3.6.1.4.1.1070.3.1.1.104.21.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify main input source | |||||||||||||
| SbackupInputSource | 1.3.6.1.4.1.1070.3.1.1.104.21.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify backup input source | |||||||||||||
| StsIDPreference | 1.3.6.1.4.1.1070.3.1.1.104.21.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify the TS ID of IP Input | |||||||||||||
| SbitRate | 1.3.6.1.4.1.1070.3.1.1.104.21.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify the bit rate's range of IP Input | |||||||||||||
| NntpSetting | 1.3.6.1.4.1.1070.3.1.1.104.22 | ||||||||||||
| Senable | 1.3.6.1.4.1.1070.3.1.1.104.22.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current NTP setting function switch
| |||||||||||||
| SserverIp | 1.3.6.1.4.1.1070.3.1.1.104.22.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current specify the IP address of server | |||||||||||||
| SintervalTime | 1.3.6.1.4.1.1070.3.1.1.104.22.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify the interval for synchronization time with server | |||||||||||||
| StimeZone | 1.3.6.1.4.1.1070.3.1.1.104.22.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specify the time zone for synchronization time with server | |||||||||||||
| NgigabitIPInfo | 1.3.6.1.4.1.1070.3.1.1.104.23 | ||||||||||||
| SlocalSetting | 1.3.6.1.4.1.1070.3.1.1.104.23.1 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current local gigabit IP board setting | |||||||||||||
| StsToIPSetting | 1.3.6.1.4.1.1070.3.1.1.104.23.2 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current TS To IP parameter setting | |||||||||||||
| SipToTSSetting | 1.3.6.1.4.1.1070.3.1.1.104.23.3 | DisplayString (SIZE (0..1024)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-write · current IP To TS parameter setting | |||||||||||||
| SsettingCommand | 1.3.6.1.4.1.1070.3.1.1.104.23.4 | INTEGER | WO | ||||||||||
scalar · INTEGER · write-only · current the command for gigabit IP board setting, 0x1111 | |||||||||||||
| SlocalStatus | 1.3.6.1.4.1.1070.3.1.1.104.23.5 | DisplayString (SIZE (0..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-only · current the status for local gigabit IP board | |||||||||||||
| StsToIPStatus | 1.3.6.1.4.1.1070.3.1.1.104.23.6 | DisplayString (SIZE (0..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-only · current the status for TS To IP | |||||||||||||
| SipToTSStatus | 1.3.6.1.4.1.1070.3.1.1.104.23.7 | DisplayString (SIZE (0..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-only · current the status for IP To TS | |||||||||||||