SL-XPDR-MIB
PacketLight Networks Ltd.This MIB module describes the optical connections.
snmptranslate -m SL-XPDR-MIB -Tpsnmpwalk -v2c -c <community> -m SL-XPDR-MIB <host> 1.3.6.1.4.1.4515.1.8Imports
| IF-MIB | InterfaceIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslXpdr | 1.3.6.1.4.1.4515.1.8 | |||
identity This MIB module describes the optical connections. | ||||
| NslXpdrConn | 1.3.6.1.4.1.4515.1.8.1 | |||
| TxpdrConnConfigTable | 1.3.6.1.4.1.4515.1.8.1.1 | NA | ||
table · not-accessible · current The connection table contains for each transponding connection a single bi-directional entry. The index to the table is the ifIndex of both XPDR interfaces. The ifType valued used for the index is: 196. | ||||
| RxpdrConnConfigEntry | 1.3.6.1.4.1.4515.1.8.1.1.1 | NA | ||
row · not-accessible · current An entry in the transponding connection table. | ||||
| CxpdrConnConfigIf1 | 1.3.6.1.4.1.4515.1.8.1.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The first XPDR interface. | ||||
| CxpdrConnConfigIf2 | 1.3.6.1.4.1.4515.1.8.1.1.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The second XPDR interface. | ||||
| CxpdrConnConfigRateControlAdmin | 1.3.6.1.4.1.4515.1.8.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This variable ask the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0-30 is used for rate control Bypass. | ||||
| CxpdrConnConfigRateControlOper | 1.3.6.1.4.1.4515.1.8.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This variable tells the rate of the traffic used by this interface. Frequency is in Kbp/s. The value 0 returned for rate control Bypass. | ||||
| CxpdrConnConfigLosPropagation | 1.3.6.1.4.1.4515.1.8.1.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current This object is used to detrmine if the LOS propagation should be active. | ||||
| CxpdrServiceType | 1.3.6.1.4.1.4515.1.8.1.1.1.6 | XpdrServiceType | RW | |
column · XpdrServiceType · read-write · current The service type of the transponder. | ||||
| CxpdrConnAddMask | 1.3.6.1.4.1.4515.1.8.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object is a bit mask relevant only for 10G Muxponder entry. It contains a bit for each Muxponder service. To add a service the management should set the corresponding bit to 1. To remove a service the bit should be set to 0. For ODU allocation, the value of xpdrConnAddMask should be set to reflect the odus/time-slots provisioned for the service according to the following rules: a. For ODU1 the first byte is 0; for ODU0 the first byte is 1. b. The second byte. Is equal to: i. The 4 bits of the first nibble correspond to Uplink 1 allocated odus counted from right to left ii. The 4 bits of the second nibble correspond to Uplink 2 allocated odus counted from right to left c. The Third and Forth bytes keep bit-mask of the allocated time-slots within the odu. | ||||
| CxpdrMuxInbandAdmin | 1.3.6.1.4.1.4515.1.8.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object is relevant only for muxponder. up value means that the muxponder inband management is enabled.
| ||||
| CxpdrMuxInbandOper | 1.3.6.1.4.1.4515.1.8.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The operational state of the inband interface.
| ||||
| CxpdrDirection | 1.3.6.1.4.1.4515.1.8.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used for unidirectional services. The upper port is the uplink as with the aps configuration. The transponder on one side should be configured as TX and the peer as RX.
| ||||
| CxpdrConnConfigCpriRateControl | 1.3.6.1.4.1.4515.1.8.1.1.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current This object is used to detrmine if the CPRI rate control should be active. | ||||
| CxpdrFaultPropagationDelay | 1.3.6.1.4.1.4515.1.8.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to determine the fault propagation delay. The value 0 mean no delay, the value 1 means 100ms delay, the value 2 means 200ms delay etc. 0 is the default value. | ||||
| CxpdrFecMode | 1.3.6.1.4.1.4515.1.8.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to determine the IEEE FEC mode for 10G and 16G services: 0 - No FEC (default) 1 - FEC Monitoring 2 - FEC Generation 3 - FEC Regeneration | ||||
| CxpdrConnAddMask1 | 1.3.6.1.4.1.4515.1.8.1.1.1.14 | TsMaskBits | RW | |
column · TsMaskBits · read-write · current This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 1. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. | ||||
| CxpdrConnAddMask2 | 1.3.6.1.4.1.4515.1.8.1.1.1.15 | TsMaskBits | RW | |
column · TsMaskBits · read-write · current This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 2. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. This entry is relevant only for protected services. | ||||
| CxpdrCryptoUser | 1.3.6.1.4.1.4515.1.8.1.1.1.16 | DisplayString | RW | |
column · DisplayString · read-write · current The user name of the crypto officer assigned to this service. Default value is Crypto | ||||
| ToduXcConnConfigTable | 1.3.6.1.4.1.4515.1.8.1.2 | NA | ||
table · not-accessible · current Description for 10G: 1. The port numbers are: 0 unassigned 1..10 ODUs of Uplink 1 11..20 ODUs of Uplink 2 (not available without 20G or 1+1 license) 2. All connections are unidirectional 3. P1 is the Source port and P2 is the Sync port 4. Port 0 is used as P2 when P1 is dropped 5. Port 0 is used as P1 when P2 is added 6. In the case of APS the two mate ODUs will apear with oduXcConnConfigProtected=TRUE 7. The allocation of ODUs per service port is described in xpdrConnAddMask above Description for 100G: The ports are the ifIndex of the tributary slots, where the path byte equals to the tributary slot. | ||||
| RoduXcConnConfigEntry | 1.3.6.1.4.1.4515.1.8.1.2.1 | NA | ||
row · not-accessible · current An entry in the ODU connection table. An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port). | ||||
| CoduXcConnConfigP1 | 1.3.6.1.4.1.4515.1.8.1.2.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current The Source port. | ||||
| CoduXcConnConfigP2 | 1.3.6.1.4.1.4515.1.8.1.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The Sync port. | ||||
| CoduXcConnConfigProtected | 1.3.6.1.4.1.4515.1.8.1.2.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Indication for entry with Protection Mates | ||||
| CoduXcConnConfigRowStatus | 1.3.6.1.4.1.4515.1.8.1.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The Status of this connection entry. | ||||
| TtribXcConnConfigTable | 1.3.6.1.4.1.4515.1.8.1.3 | NA | ||
table · not-accessible · current The ports are: For service port - the first tributary (1..80) For Uplink 1 - 100 + first tributary (101..180) For Uplink 2 - 200 + first tributary (201..280) | ||||
| RtribXcConnConfigEntry | 1.3.6.1.4.1.4515.1.8.1.3.1 | NA | ||
row · not-accessible · current An entry in the tributary cross connection table. An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port). | ||||
| CtribXcConnConfigP1 | 1.3.6.1.4.1.4515.1.8.1.3.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current The Source port. | ||||
| CtribXcConnConfigP2 | 1.3.6.1.4.1.4515.1.8.1.3.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The Sync port. | ||||
| CtribXcConnServiceType | 1.3.6.1.4.1.4515.1.8.1.3.1.3 | XpdrServiceType | RW | |
column · XpdrServiceType · read-write · current The service type of the service. | ||||
| CtribXcConnMask1 | 1.3.6.1.4.1.4515.1.8.1.3.1.4 | TsMaskBits | RW | |
column · TsMaskBits · read-write · current This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 1. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. | ||||
| CtribXcConnMask2 | 1.3.6.1.4.1.4515.1.8.1.3.1.5 | TsMaskBits | RW | |
column · TsMaskBits · read-write · current This object is a bit mask relevant only for 100G Muxponder entry. It contains a bit for each tributary slot allocated to the service port from Uplink 2. To incluse a tributary slot the management should set the corresponding bit to 1. To remove a tributary slot service the bit should be set to 0. This entry is relevant only for protected services. | ||||
| CtribXcConnConfigProtected | 1.3.6.1.4.1.4515.1.8.1.3.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Indication for entry with Protection Mates | ||||
| CtribXcConnConfigRowStatus | 1.3.6.1.4.1.4515.1.8.1.3.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The Status of this connection entry. | ||||
| SsmmOwnerMode | 1.3.6.1.4.1.4515.1.8.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The owner of the SMM tables.
| ||||
| NslXpdrLastChange | 1.3.6.1.4.1.4515.1.8.6 | |||
| NslXpdrTraps | 1.3.6.1.4.1.4515.1.8.7 | |||
| NslXpdrTraps0 | 1.3.6.1.4.1.4515.1.8.7.0 | |||
| !xpdrConnConfigTableChange0 | 1.3.6.1.4.1.4515.1.8.7.0.1 | |||
notification · current A xpdrConnConfigTableChange trap is sent when the content of the xpdrConnConfigTable is changed. It is defined to support browsers that don't recognize RFC 2576. | ||||
| !xpdrConnConfigTableChange | 1.3.6.1.4.1.4515.1.8.7.1 | |||
notification · current A xpdrConnConfigTableChange trap is sent when the content of the xpdrConnConfigTable is changed. | ||||
Textual conventions
TsMaskBitsOCTET STRING (SIZE (0..10))100G Tributary Slots Mask Bits 1..80.
XpdrServiceTypeINTEGERcopper10m(170)copper10mAn(171)copperFe(17)copperFeAn(1701)copperGbe(18)cpri1(81)cpri2(82)cpri3(83)cpri4(84)cpri5(85)cpri6(86)cpri7(87)ds3Sts1(1)dvbVideo(4)enc10GbELan(91)enc10GbENoPm(118)enc1GbE10g(99)enc1GbELan(92)encCpri1(111)encCpri2(112)encCpri3(113)encCpri4(114)encCpri5(115)encCpri6(116)encCpri7(117)encGbe100lan(101)encGbe40lan(100)encOc192(106)encOtu2(102)encOtu2e(103)encOtu3(104)encOtu4(105)encOtuc2(121)encStm64(107)encfc10g(98)encfc16g(97)encfc16gNoIsl(110)encfc1g(93)encfc2g(94)encfc32g(108)encfc4g(95)encfc8g(96)escon(3)eth10m(29)fc10LanToOtu1f(61)fc10LanToOtu2f(62)fc16g(70)fc16gNoIsl(77)fc1gFicon(5)fc2g(7)fc32g(78)fc4g(12)fc8LanToOtu2(63)fc8g(41)fe(2)ficon1g(22)ficon2g(23)ficon4g(28)ficon8g(42)gbE(6)gbe100lan(69)gbe10LanToOtu1e(58)gbe10LanToOtu2A(57)gbe10LanToOtu2B(60)gbe10LanToOtu2e(59)gbe10WanToOtu2(56)gbe40lan(68)gpon248(27)infiniband25G(13)mux10GbE(43)mux1GbE(37)mux1GbERegen(38)mux2GbE(19)mux2GbERegen(39)mux4GbE(20)mux4GbERegen(40)noPm10GbE(45)oc12Stm4(9)oc192ToOtu2(54)oc24gpon(15)oc3Stm1(8)oc48Stm16(10)oc768(65)other(11)otn27g(14)otu1e(50)otu1f(52)otu2e(51)otu2f(53)otu3(64)otu4(67)otuc2(120)smpte3dSdi(74)smpte3gSdi(73)smpte3gSdiNtsc(76)smpteHdSdi(71)smpteHdSdiNtsc(75)smpteSdSdi(72)smpteSdi(16)stm1(24)stm16(26)stm256(66)stm4(25)stm64ToOtu2(55)syncEgbE(44)totu2(46)xfp10GFC(35)xfp10GbELan(33)xfp10GbEWan(32)xfp10GbEWanStm64(36)xfp10oc192(30)xfp10otu2(34)xfp10stm64(31)xpdr5G(21)The service type of the tarsponder.
Traps / Notifications
- xpdrConnConfigTableChange
1.3.6.1.4.1.4515.1.8.7.1 - xpdrConnConfigTableChange0
1.3.6.1.4.1.4515.1.8.7.0.1