SL-TESTS-MIB
PacketLight Networks Ltd.This MIB module describes the available on-demand tests.
snmptranslate -m SL-TESTS-MIB -Tpsnmpwalk -v2c -c <community> -m SL-TESTS-MIB <host> 1.3.6.1.4.1.4515.1.3.13Imports
| IF-MIB | InterfaceIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-MAIN-MIB | slMain |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslTests | 1.3.6.1.4.1.4515.1.3.13 | |||
identity This MIB module describes the available on-demand tests. | ||||
| NslTestsIfLoop | 1.3.6.1.4.1.4515.1.3.13.1 | |||
| TslTestsIfLoopTable | 1.3.6.1.4.1.4515.1.3.13.1.1 | NA | ||
table · not-accessible · current The port loopback test table. This table controls the port loopback tests. | ||||
| RslTestsIfLoopEntry | 1.3.6.1.4.1.4515.1.3.13.1.1.1 | NA | ||
row · not-accessible · current This entry is used to operate an port loopback test.
| ||||
| CslTestsIfLoopIfIndex | 1.3.6.1.4.1.4515.1.3.13.1.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The Interface Index of the port that should be loopped back. | ||||
| CslTestsIfLoopDuration | 1.3.6.1.4.1.4515.1.3.13.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The test duration in 1/10 Sec. The maximum allowed duration is 1 hour. After this time the port configuration returns to its original setting and the Agent automatically deletes the entry from the table. | ||||
| CslTestsIfLoopStatus | 1.3.6.1.4.1.4515.1.3.13.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This variable is used to start or stop a loopback test. In order to start a test the NMS should set the value to start(1). If the test mode is toggle, the NMS should stop the test by setting the value to stop(2). In the case of prbs test, after the test has stopped, if the test fails the value of the status shall be fail(3).
| ||||
| CslTestsIfLoopType | 1.3.6.1.4.1.4515.1.3.13.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The loopback type: facility The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal The signal that is about to be transmitted is connected to the associated incoming receiver. prbs send and recieve prbs pattern. otnPrbs send and receive OTN prbs
| ||||
| CslTestsIfLoopMode | 1.3.6.1.4.1.4515.1.3.13.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The loopback mode: timeout In this mode the duration of the loopback is determined by the slTestsIfLoopDuration object. toggle In this mode the loopback should be toggled explicitly by the user.
| ||||
| CslTestsIfLoopErrors | 1.3.6.1.4.1.4515.1.3.13.1.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The prbs errors are counted only of the test succeeded. | ||||
| CslTestsIfLoopResult | 1.3.6.1.4.1.4515.1.3.13.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This variable is used for prbs test result indication.
| ||||
| CslTestsIfLoopPassedSeconds | 1.3.6.1.4.1.4515.1.3.13.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Number of seconds passed since the test started. | ||||
| NslTestsTraps | 1.3.6.1.4.1.4515.1.3.13.2 | |||
| NslTestsTraps0 | 1.3.6.1.4.1.4515.1.3.13.2.0 | |||
| !slTestsTrapsLoopbackTableChanged0 | 1.3.6.1.4.1.4515.1.3.13.2.0.2 | |||
notification · current A slTestsTrapsLoopbackTableChanged trap is sent when the content of slTestsIfLoopTable changes. When the loop back is deleted the returned value of slTestsIfLoopActivity should be false. | ||||
| SslTestsTrapsLoopbackActive | 1.3.6.1.4.1.4515.1.3.13.2.1 | TruthValue | RO | |
scalar · TruthValue · read-only · current The Loopback is active Yes/No. | ||||
| !slTestsTrapsLoopbackTableChanged | 1.3.6.1.4.1.4515.1.3.13.2.2 | |||
notification · current A slTestsTrapsLoopbackTableChanged trap is sent when the content of slTestsIfLoopTable changes. When the loop back is deleted the returned value of slTestsIfLoopActivity should be false. | ||||
Traps / Notifications
- slTestsTrapsLoopbackTableChanged
1.3.6.1.4.1.4515.1.3.13.2.2 - slTestsTrapsLoopbackTableChanged0
1.3.6.1.4.1.4515.1.3.13.2.0.2