SL-SONET-MIB
PacketLight Networks Ltd.This MIB module describes the SiteLight SONET Service. The mib contains the extensions required for the rfc2558.
snmptranslate -m SL-SONET-MIB -Tpsnmpwalk -v2c -c <community> -m SL-SONET-MIB <host> 1.3.6.1.4.1.4515.1.6Imports
| IF-MIB | InterfaceIndex, ifIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslSonetMib | 1.3.6.1.4.1.4515.1.6 | |||
identity This MIB module describes the SiteLight SONET Service. The mib contains the extensions required for the rfc2558. | ||||
| NslSonetConfig | 1.3.6.1.4.1.4515.1.6.1 | |||
| TslSonetConfigTable | 1.3.6.1.4.1.4515.1.6.1.1 | NA | ||
table · not-accessible · current The SONET/SDH configuration table. This table has objects for configuring sonet lines. | ||||
| RslSonetConfigEntry | 1.3.6.1.4.1.4515.1.6.1.1.1 | NA | ||
row · not-accessible · current An entry in the table. There is an entry for each SONET line in the table. Entries are automatically created for an ifType value of sonet(39). 'ifAdminStatus' from the ifTable must be used to enable or disable a line. By default, the line state is down.
| ||||
| CslSonetConfigFrameScramble | 1.3.6.1.4.1.4515.1.6.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to disable or enable the Scrambling option in SONET line. Please refer to GR-253-CORE for frame scrambling.
| ||||
| CslSonetConfigType | 1.3.6.1.4.1.4515.1.6.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object represents the configured line type for Trunks: sonetSts48c(5) - 1 x Sts48 (2.5GbTrunk) sonetSts192c(12) - 1 x Sts192 (10Gb Trunk) sonetStsOther(13) - for OC-n interfaces see slSonetFsTable.
| ||||
| CslSonetConfigDccSelection | 1.3.6.1.4.1.4515.1.6.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object selects the DCC type.
| ||||
| CslSonetResetAllCounters | 1.3.6.1.4.1.4515.1.6.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this variable to 1 will cause all of the counters (performance regsters) on this SONET interface to be initialized to zero (0).
| ||||
| CslSonetPortThresholdTrapEnable | 1.3.6.1.4.1.4515.1.6.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This variable indicates whether threshold traps should be generated for this SONET interface.
| ||||
| CslSonetConfigSdThreshold | 1.3.6.1.4.1.4515.1.6.1.1.1.6 | INTEGER (5..9) | RW | |
column · INTEGER (5..9) · read-write · current This object contains the Bit Error Rate threshold for Signal Degrade detection on the working line. Once this threshold is exceeded, an APS switch will occur. This value is 10 to -n where n is between 5 and 9 (read-write). | ||||
| CslSonetConfigSfThreshold | 1.3.6.1.4.1.4515.1.6.1.1.1.7 | INTEGER (3..5) | RW | |
column · INTEGER (3..5) · read-write · current This object contains the Bit Error Rate threshold for Signal Fault detection on the working line. Once this threshold is exceeded, an APS switch will occur. This value is 10 to the -n, where n is between 3 and 5. (read-write) | ||||
| CslSonetCompression | 1.3.6.1.4.1.4515.1.6.1.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32. 2 - Means POS compression with CRC-16. Note that the two connected trunks should be configured to the same value. Note also that the BW calculation of the OC-n should be changed according to this value.
| ||||
| CslSonetOverheadTunneling | 1.3.6.1.4.1.4515.1.6.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The section and line overhead tunneling configuration: none(0) - no tunneling support lineDcc(1) - line DCC tunneling k1k2(2) - line DCC + protection k byte full(3) - all transport overhead bytes are tunneled
| ||||
| CslSonetLopBitmask | 1.3.6.1.4.1.4515.1.6.1.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The LOP status. Each bit of the bits represent the status of the LOP alarm in corresponding STS. For a path with more than a single STS, only the value of the first STS in the path is relevant. This object is relevant only for the OC-N cards and not for the Trunk. In the next future this object will be replaced with an object of a new table that shall describe the OC-N frame structure. | ||||
| CslSonetTdmTrunk | 1.3.6.1.4.1.4515.1.6.1.1.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current This object is applicable only to the OC-n ports. TRUE - means that the OC-n port is used as a TDM Trunk. FLASE - means normal OC-n port. | ||||
| CslSonetFsApply | 1.3.6.1.4.1.4515.1.6.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Writing to this object activate the slSonetFsTable setting. This allow the NMS to do many changes to the slSonetFsTable and then APPLY them at once. This prevent from going through unconsistent steps. This object always returns the value 0. | ||||
| CslSonetTxLte | 1.3.6.1.4.1.4515.1.6.1.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current The SS bits to transmit (bits 5,6 in H1,H1*).
| ||||
| CslSonetReceivedLte | 1.3.6.1.4.1.4515.1.6.1.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current The detected LTE type, according to the received SS bits (bits 5,6 in H1,H1*).
| ||||
| CslSonetResetPmThreshold | 1.3.6.1.4.1.4515.1.6.1.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this variable to 1 will reset the PM threshold parameters to the factory defaults.
| ||||
| CslSonetResetAlsParams | 1.3.6.1.4.1.4515.1.6.1.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this variable to 1 will reset the ALS parameters to the factory defaults.
| ||||
| CslSonetTransceiverType | 1.3.6.1.4.1.4515.1.6.1.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current The tranceiver type.
| ||||
| CslSonetTransceiverMedia | 1.3.6.1.4.1.4515.1.6.1.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current The tranceiver media.
| ||||
| NslSonetOh | 1.3.6.1.4.1.4515.1.6.2 | |||
| NslSonetOhTrace | 1.3.6.1.4.1.4515.1.6.2.1 | |||
| TslSonetTraceTable | 1.3.6.1.4.1.4515.1.6.2.1.1 | NA | ||
table · not-accessible · current The SONET/SDH Trace table. This table contains objects for tracing the sonet section and path. | ||||
| RslSonetTraceEntry | 1.3.6.1.4.1.4515.1.6.2.1.1.1 | NA | ||
row · not-accessible · current An entry in the trace table. Entries exist for active sonet interfaces. The objects in this table are used to verify continued connection between the two ends of the line.
| ||||
| CslSonetTraceMode | 1.3.6.1.4.1.4515.1.6.2.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Determine the Trace Message Mode.
| ||||
| CslSonetTraceToTransmit | 1.3.6.1.4.1.4515.1.6.2.1.1.1.2 | DisplayString (SIZE (0..62)) | RW | |
column · DisplayString (SIZE (0..62)) · read-write · current Sonet Trace To Transmit. This is string that is transmitted to perform Sonet trace diagnostics. The trace string is repetitively transmited so that a trace receiving terminal can verify its continued connection to the intended transmitter. The default value is a zero-length string. Unless this object is set to a non-zero length string, tracing will not be performed. The Agent is responsible to pad the end of the string with <CR><LF>. | ||||
| CslSonetTraceToExpect | 1.3.6.1.4.1.4515.1.6.2.1.1.1.3 | DisplayString (SIZE (0..62)) | RW | |
column · DisplayString (SIZE (0..62)) · read-write · current Sonet Trace Massage To Expect. The receiving terminal verifies if the incoming string matches this string. The value of 'slSonetTraceFailure' indicates whether a trace mismatch occurred. The default value is a zero-length string. The Agent is responsible to pad the end of the string with <CR><LF>. | ||||
| CslSonetTraceFailure | 1.3.6.1.4.1.4515.1.6.2.1.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The value of this object is set to 'true' when Sonet Section received trace does not match the 'slSonetTraceToExpect'. | ||||
| CslSonetTraceReceived | 1.3.6.1.4.1.4515.1.6.2.1.1.1.5 | DisplayString (SIZE (0..62)) | RO | |
column · DisplayString (SIZE (0..62)) · read-only · current This object is used to view the Sonet Trace Message that is received by the receiving terminal. The Agent is responsible to pad the end of the string with <CR><LF>. | ||||
| NslSonetOhSl | 1.3.6.1.4.1.4515.1.6.2.2 | |||
| TslSonetSlTable | 1.3.6.1.4.1.4515.1.6.2.2.1 | NA | ||
table · not-accessible · current The SONET/SDH Signal Label table. This table contains signal label for the sonet path. | ||||
| RslSonetSlEntry | 1.3.6.1.4.1.4515.1.6.2.2.1.1 | NA | ||
row · not-accessible · current An entry in the SONET/SDH Signal Label table. The entries exist for active sonet lines. The objects in this table are used to verify continued connection between the two ends of the line.
| ||||
| CslSonetSlToTransmit | 1.3.6.1.4.1.4515.1.6.2.2.1.1.2 | SignalLabel | RW | |
column · SignalLabel · read-write · current Sonet Signal Label To Transmit. | ||||
| CslSonetSlToExpect | 1.3.6.1.4.1.4515.1.6.2.2.1.1.3 | SignalLabel | RW | |
column · SignalLabel · read-write · current Sonet Signal Label To Expect. | ||||
| CslSonetSlFailure | 1.3.6.1.4.1.4515.1.6.2.2.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The value of this object is set to 'true' when Sonet received signal label does not match the 'slSonetSlToExpect'. | ||||
| CslSonetSlReceived | 1.3.6.1.4.1.4515.1.6.2.2.1.1.5 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current This object is used to view the Sonet Signal Label that is received by the receiving terminal. | ||||
| NslSonetOhTraps | 1.3.6.1.4.1.4515.1.6.2.3 | |||
| NslSonetPos | 1.3.6.1.4.1.4515.1.6.6 | |||
| TslSonetPosTable | 1.3.6.1.4.1.4515.1.6.6.1 | NA | ||
table · not-accessible · current The POS PM Table. | ||||
| RslSonetPosEntry | 1.3.6.1.4.1.4515.1.6.6.1.1 | NA | ||
row · not-accessible · current The entries exist for active Trunk sonet lines ifType = pos(171). The objects in this table are used to moitor the POS layer.
| ||||
| CslSonetPosFcs | 1.3.6.1.4.1.4515.1.6.6.1.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current The Number of FCS Errors. | ||||
| CslSonetPosAbort | 1.3.6.1.4.1.4515.1.6.6.1.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The Number of Aborted packets. | ||||
| CslSonetPosMinViolation | 1.3.6.1.4.1.4515.1.6.6.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The Number of Minimum length violation packets. | ||||
| CslSonetPosMaxViolation | 1.3.6.1.4.1.4515.1.6.6.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The Number of Maximum length violation packets. | ||||
| CslSonetPosRxfifoDiscard | 1.3.6.1.4.1.4515.1.6.6.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The Number of packets discarded due to RXFIFO error. | ||||
| CslSonetPosPacketReceived | 1.3.6.1.4.1.4515.1.6.6.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of packets received. | ||||
| CslSonetPosPacketReceivedOk | 1.3.6.1.4.1.4515.1.6.6.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of error free packets. | ||||
| NslSonetAls | 1.3.6.1.4.1.4515.1.6.7 | |||
| TslSonetAlsTable | 1.3.6.1.4.1.4515.1.6.7.1 | NA | ||
table · not-accessible · current The ALS configuration Table. | ||||
| RslSonetAlsEntry | 1.3.6.1.4.1.4515.1.6.7.1.1 | NA | ||
row · not-accessible · current The entries exist for active sonet lines ifType = sonet(39). The objects in this table are used to configure the ALS algorithm.
| ||||
| CslSonetAlsMode | 1.3.6.1.4.1.4515.1.6.7.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable the ALS algorithm. Note that the if the Laser Admin Status is 'down' the ALS mechanism is not operational.
| ||||
| CslSonetLosDeclareTime | 1.3.6.1.4.1.4515.1.6.7.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Time to declare optical LOS present or clear: 550 +- 50 msec.
| ||||
| CslSonetTestPulseTime | 1.3.6.1.4.1.4515.1.6.7.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Manual restart for test Pulse time (in manual restart) - 90+-10 sec.
| ||||
| CslSonetManualPulseTime | 1.3.6.1.4.1.4515.1.6.7.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Manual restart Pulse time (in manual mode) - 2+-0.25 sec.
| ||||
| CslSonetAutomaticPulseTime | 1.3.6.1.4.1.4515.1.6.7.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec.
| ||||
| CslSonetAutomaticDelayTime | 1.3.6.1.4.1.4515.1.6.7.1.1.6 | INTEGER (60..300) | RW | |
column · INTEGER (60..300) · read-write · current In Automatic mode. The delay between two laser re-activations. | ||||
| CslSonetLaserTestActivate | 1.3.6.1.4.1.4515.1.6.7.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Activate the laser for test operation.
| ||||
| CslSonetLaserManualActivate | 1.3.6.1.4.1.4515.1.6.7.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Activate the laser manual operation.
| ||||
| NslSonetFs | 1.3.6.1.4.1.4515.1.6.8 | |||
| TslSonetFsTable | 1.3.6.1.4.1.4515.1.6.8.1 | NA | ||
table · not-accessible · current The frame structure configuration Table. In order to define a new path the NMS should create and configure an entry in this table. The table is also used to monitor the status of the LOP alarm per path. | ||||
| RslSonetFsEntry | 1.3.6.1.4.1.4515.1.6.8.1.1 | NA | ||
row · not-accessible · current The entries exist for sonet paths ifType = sonet(39). The objects in this table are used to configure the frame structure. Each OC-N line interface shall maintain a static table with number of lines equal to the N. Initially the table will be initialized to STS-Nc.
| ||||
| CslSonetFsIfIndex | 1.3.6.1.4.1.4515.1.6.8.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index. | ||||
| CslSonetFsSts | 1.3.6.1.4.1.4515.1.6.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The number of the first STS in the path. Note that no all values are legal because there is no support for combus with mixed structure | ||||
| CslSonetFsWidth | 1.3.6.1.4.1.4515.1.6.8.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The number STS's in the path. The width is only valid for the first STS in the path. The other STSs of the path will have width=0. | ||||
| CslSonetFsFullPathTermination | 1.3.6.1.4.1.4515.1.6.8.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current FALSE - means partial path termination (only LOP alarm). TRUE - include full support for path Alarms and PM counters. | ||||
| CslSonetFsGranularity | 1.3.6.1.4.1.4515.1.6.8.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This value is set by the NMS according to the configured frame structure. Each VC-3 that is mapped to AUG-1 via VC-4 should have the value vc4(1). Otherwise the value should be vc3(2).
| ||||
| NslSonetTraps | 1.3.6.1.4.1.4515.1.6.11 | |||
| !slSonetFsTableChange | 1.3.6.1.4.1.4515.1.6.11.1 | |||
notification · current A slSonetFsTableChange trap is sent when the content of the slSonetFsTable is changed. This trap may be used by the NMS to identify the removal of path interfaces, or addition of new path interfaces
| ||||
Textual conventions
SignalLabelINTEGERsigEquipped(1)sigPathAsyncDs4na(18)sigPathAsynchDs3(4)sigPathAtm(19)sigPathDqdb(20)sigPathFddi(21)sigPathFloatVt(2)sigPathGfp(27)sigPathHdlc(22)sigPathLoackedVt(3)sigPathSyntran(5)sigUnequipped(0)STS path signal label -- one byte, C2, class A, is allocated to indicate the construction of the STS SPE. The following hex values of the C2 byte has been defined.
Traps / Notifications
- slSonetFsTableChange
1.3.6.1.4.1.4515.1.6.11.1