SL-SECU-MIB
PacketLight Networks Ltd.This security module. This mib is used to configure the firewall.
snmptranslate -m SL-SECU-MIB -Tpsnmpwalk -v2c -c <community> -m SL-SECU-MIB <host> 1.3.6.1.4.1.4515.1.3.24Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SL-MAIN-MIB | slMain |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, transmission |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslSecuMib | 1.3.6.1.4.1.4515.1.3.24 | |||
identity This security module. This mib is used to configure the firewall. | ||||
| NslSecuGen | 1.3.6.1.4.1.4515.1.3.24.1 | |||
| SslSecuFirewallEnable | 1.3.6.1.4.1.4515.1.3.24.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current General Enable/Disable of the firewall operation. | ||||
| NslSecuSelect | 1.3.6.1.4.1.4515.1.3.24.2 | |||
| TslSecuSelectTable | 1.3.6.1.4.1.4515.1.3.24.2.1 | NA | ||
table · not-accessible · current The security protocol selection table. | ||||
| RslSecuSelectEntry | 1.3.6.1.4.1.4515.1.3.24.2.1.1 | NA | ||
| CslSecuSelectType | 1.3.6.1.4.1.4515.1.3.24.2.1.1.1 | SlSecuType | NA | |
column · SlSecuType · not-accessible · current The secutity protocol type | ||||
| CslSecuSelectPort | 1.3.6.1.4.1.4515.1.3.24.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The corresponding port number of the protocol. Port number 0 is used when not applicable/available. | ||||
| CslSecuSelectEnable | 1.3.6.1.4.1.4515.1.3.24.2.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current True - Enables the firewall for the corresponding protocol. False - Dsables the firewall for the corresponding protocol. When enabled the firewall blocks the protocol. | ||||
| NslSecuWl | 1.3.6.1.4.1.4515.1.3.24.3 | |||
| TslSecuWlTable | 1.3.6.1.4.1.4515.1.3.24.3.1 | NA | ||
table · not-accessible · current This white list table. | ||||
| RslSecuWlEntry | 1.3.6.1.4.1.4515.1.3.24.3.1.1 | NA | ||
| CslSecuWlIp | 1.3.6.1.4.1.4515.1.3.24.3.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to allow | ||||
| CslSecuWlMask | 1.3.6.1.4.1.4515.1.3.24.3.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the slSecuWlIp field. | ||||
| CslSecuWlStatus | 1.3.6.1.4.1.4515.1.3.24.3.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to row installation and removal conventions. | ||||
| NslSecuEncryption | 1.3.6.1.4.1.4515.1.3.24.4 | |||
| TslSecuEncryptionTable | 1.3.6.1.4.1.4515.1.3.24.4.1 | NA | ||
table · not-accessible · current The encryption table. This table has an entry per transponder. | ||||
| RslSecuEncryptionEntry | 1.3.6.1.4.1.4515.1.3.24.4.1.1 | NA | ||
row · not-accessible · current This entry is used to control the necryption per transponder. | ||||
| CslSecuEncryptionIfIndex | 1.3.6.1.4.1.4515.1.3.24.4.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The Interface Index of the uplink port. | ||||
| CslSecuEncryptionEnable | 1.3.6.1.4.1.4515.1.3.24.4.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/Disable the encryption on this uplink. | ||||
| CslSecuEncryptionStatus | 1.3.6.1.4.1.4515.1.3.24.4.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the encryption finite state machine.
| ||||
| CslSecuEncryptionForceInit | 1.3.6.1.4.1.4515.1.3.24.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Writing this valiable forces init to the encryption state machine. | ||||
| CslSecuEncryptionPreShared | 1.3.6.1.4.1.4515.1.3.24.4.1.1.5 | DisplayString | RW | |
column · DisplayString · read-write · current The pre-shared secret. Either the pre-shared key, or the shared secret to avoid Mitm when using DH public key exchange. | ||||
| CslSecuEncryptionKeyExchangePeriod | 1.3.6.1.4.1.4515.1.3.24.4.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The Key Exchage Period, specified in minutes. The value 0 means to perform the key exchange only once at link establishment. | ||||
| CslSecuEncryptionLock | 1.3.6.1.4.1.4515.1.3.24.4.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Lock/Unlock the encrypted service for this uplink. | ||||
| CslSecuEncryptionProtectedStatus | 1.3.6.1.4.1.4515.1.3.24.4.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The protected port state of the encryption finite state machine.
| ||||
Textual conventions
SlSecuTypeINTEGERftp(7)http(3)https(4)icmp(5)sftp(13)snmp(6)snmpovertcp(12)ssh(2)telnet(1)tftp(8)tl1(9)tl1ssh(10)wl(11)The security protocol types: Telnet - CLI SSH - Secured Telnet HTTP - Hyper Text HTTPS - Secured HTTP ICMP - Ping SNMP - Simple Network Management (only 161 is supported) FTP - File Transfer TFTP - Trivial FTP TL1 - TL1 over Telnet TL1SSH - TL1 over SSH WL - White list (port number is 0) SNMPOVERTCP - SNMP over TCP SFTP - Client side