SL-ROADM-MIB
PacketLight Networks Ltd.This MIB module describes the ROADM
snmptranslate -m SL-ROADM-MIB -Tpsnmpwalk -v2c -c <community> -m SL-ROADM-MIB <host> 1.3.6.1.4.1.4515.1.1.16Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SL-NE-MIB | slService |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslROADM | 1.3.6.1.4.1.4515.1.1.16 | |||
identity This MIB module describes the ROADM | ||||
| NslROADMConfig | 1.3.6.1.4.1.4515.1.1.16.1 | |||
| TslWSSConfigTable | 1.3.6.1.4.1.4515.1.1.16.1.1 | NA | ||
table · not-accessible · current The ROADM Configuration table. | ||||
| RslWSSConfigEntry | 1.3.6.1.4.1.4515.1.1.16.1.1.1 | NA | ||
| CslWSSConfigLineIndex | 1.3.6.1.4.1.4515.1.1.16.1.1.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Only one entry in the table. Thus this is a dummy ifIndex that equals to 1. | ||||
| CslWSSConfigOperStatus | 1.3.6.1.4.1.4515.1.1.16.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The WSS operational status. 0 - DOWN, 1 - UP. | ||||
| CslWSSConfigSwitchTemp | 1.3.6.1.4.1.4515.1.1.16.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The switch temperature in 0.1 celsius | ||||
| CslWSSConfigBoardTemp | 1.3.6.1.4.1.4515.1.1.16.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The board temperature in 0.1 celsius | ||||
| CslWSSConfigCaseTemp | 1.3.6.1.4.1.4515.1.1.16.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The case temperature in 0.1 celsius | ||||
| CslWSSConfigUptime | 1.3.6.1.4.1.4515.1.1.16.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The case temperature in 0.1 celsius | ||||
| CslWSSConfigComFirstWl | 1.3.6.1.4.1.4515.1.1.16.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The first DWDM ITU G.694.1 channel of the Waveplan. Specified in 3.125GHz units | ||||
| CslWSSConfigComChCount | 1.3.6.1.4.1.4515.1.1.16.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The overall count of channels in the Waveplan. The channels are ordered in increasing frequency (decreasing wavelength). | ||||
| CslWSSConfigPowerLevel | 1.3.6.1.4.1.4515.1.1.16.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The received Destination Access Point Identifier. | ||||
| CslWSSConfigAttenLevel | 1.3.6.1.4.1.4515.1.1.16.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The received Source Access Point Identifier. | ||||
| TslROCHConfigTable | 1.3.6.1.4.1.4515.1.1.16.1.2 | NA | ||
table · not-accessible · current The ROADM Channel Configuration table. | ||||
| RslROCHConfigEntry | 1.3.6.1.4.1.4515.1.1.16.1.2.1 | NA | ||
| CslROCHConfigLineIndex | 1.3.6.1.4.1.4515.1.1.16.1.2.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex of the channel. The channels use the paths 1-48 with the port number of the COM | ||||
| CslROCHConfigProvisioning | 1.3.6.1.4.1.4515.1.1.16.1.2.1.2 | ROCHProvisioningType | RW | |
column · ROCHProvisioningType · read-write · current The channel provisioning | ||||
| CslROCHConfigInPowerLevel | 1.3.6.1.4.1.4515.1.1.16.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The Power Level of the channel equal to Out Power Level + Attenuation | ||||
| CslROCHConfigOutPowerLevel | 1.3.6.1.4.1.4515.1.1.16.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The Output Power Level of the channel | ||||
| CslROCHConfigChannelDetect | 1.3.6.1.4.1.4515.1.1.16.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Channel detect indication. 0 - not detected, 1 - channel is detected | ||||
| CslROCHConfigChPowerFailHighThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel High Power Failure. Setting this value applies to all channels. | ||||
| CslROCHConfigChPowerFailLowThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel Low Power Failure. Setting this value applies to all channels. | ||||
| CslROCHConfigChPowerDegHighThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel High Power Degrade. Setting this value applies to all channels. | ||||
| CslROCHConfigChPowerDegLowThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel Low Power Degrade. Setting this value applies to all channels. | ||||
| CslROCHConfigChPowerHystHighThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel High Power Hysteresis. Setting this value applies to all channels. | ||||
| CslROCHConfigChPowerHystLowThresh | 1.3.6.1.4.1.4515.1.1.16.1.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The threshold for channel Low Power Hysteresis. Setting this value applies to all channels. | ||||
| NslROADMPm | 1.3.6.1.4.1.4515.1.1.16.2 | |||
| NslROADMTraps | 1.3.6.1.4.1.4515.1.1.16.3 | |||
Textual conventions
ROCHProvisioningTypeINTEGERadd(3)exp(2)none(1)The channel provisioning type.