SL-MAIN-MIB
PacketLight Networks Ltd.This MIB module describes the Main Board
snmptranslate -m SL-MAIN-MIB -Tpsnmpwalk -v2c -c <community> -m SL-MAIN-MIB <host> 1.3.6.1.4.1.4515.1.3Imports
| IF-MIB | InterfaceIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IslMain | 1.3.6.1.4.1.4515.1.3 | ||||||||||||||||||||
identity This MIB module describes the Main Board | |||||||||||||||||||||
| NslmSys | 1.3.6.1.4.1.4515.1.3.1 | ||||||||||||||||||||
| SslmSysGatewayAddr | 1.3.6.1.4.1.4515.1.3.1.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Gateway node IP Address. | |||||||||||||||||||||
| SslmSysSubnetMask | 1.3.6.1.4.1.4515.1.3.1.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Subnetwork Mask IP Address. | |||||||||||||||||||||
| SslmSysIpAddr | 1.3.6.1.4.1.4515.1.3.1.3 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Node IP Address. | |||||||||||||||||||||
| SslmSysAlmAct | 1.3.6.1.4.1.4515.1.3.1.4 | INTEGER (0..30) | RW | ||||||||||||||||||
scalar · INTEGER (0..30) · read-write · current Alarm Activation Time specified in Half-Seconds units.
Alarm will be considered active only if it
has been stable for that time. | |||||||||||||||||||||
| SslmSysAlmDeact | 1.3.6.1.4.1.4515.1.3.1.5 | INTEGER (0..30) | RW | ||||||||||||||||||
scalar · INTEGER (0..30) · read-write · current Alarm Clearance Time specified in Half-Seconds units.
Alarm will be considered clear only if it
has been stable for that time. | |||||||||||||||||||||
| SslmSysAdminStatus | 1.3.6.1.4.1.4515.1.3.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Instruct the system to perform the boot according to the specified type.
| |||||||||||||||||||||
| SslmSysOperStatus | 1.3.6.1.4.1.4515.1.3.1.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The operational system state.
| |||||||||||||||||||||
| SslmBoxSize | 1.3.6.1.4.1.4515.1.3.1.8 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The box size as was configured in the SEEP.
| |||||||||||||||||||||
| SslmSysCalendarTime | 1.3.6.1.4.1.4515.1.3.1.9 | DateAndTime | RW | ||||||||||||||||||
scalar · DateAndTime · read-write · current The system calendar time. | |||||||||||||||||||||
| SslmSysPmStartOfDay | 1.3.6.1.4.1.4515.1.3.1.10 | INTEGER (0..23) | RW | ||||||||||||||||||
scalar · INTEGER (0..23) · read-write · current The time of day that marks the beginning of each 1-day interval used in the performance monitoring parameters for all interfaces in the NE. This time is on an hour boundary. | |||||||||||||||||||||
| SslmSysActiveSwVersion | 1.3.6.1.4.1.4515.1.3.1.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Determines the active software version. This is the version that will
be loaded by rebooted cards. It is not legal to set this object
to the id of an illegal system software version.
swRevFtpStart(3) - is set by the NMS to signal the FTP start.
swRevFtpEnd(4) - is set by the NMS to signal the FTP completion.
swRevAHot(5) - means to change the active software version to A,
and to preform hot restart to all cards.
swRevBHot(6) - means to change the active software version to B,
and to preform hot restart to all cards.
Reading the object returns the current active software version.
| |||||||||||||||||||||
| TslmSwRevTable | 1.3.6.1.4.1.4515.1.3.1.12 | NA | |||||||||||||||||||
table · not-accessible · current This table keeps the information about the system software revisions. | |||||||||||||||||||||
| RslmSwRevEntry | 1.3.6.1.4.1.4515.1.3.1.12.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry exist per system revsion type (A or B).
| |||||||||||||||||||||
| CslmSwRevDirectory | 1.3.6.1.4.1.4515.1.3.1.12.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The directory name A or B of this system software revision.
| |||||||||||||||||||||
| CslmSwRevStatus | 1.3.6.1.4.1.4515.1.3.1.12.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The status of the system software directory content. The value valid(1) means that the data of this entry is valid and that the software is loaded correctly and is currently used. The value copyingToStandby(3) means that the SW is currently being copied to the Standby Switch. During this period the NMS is not allowed to upgrade the SW version. This value is applicable only to the Standby software version. The value invalid(2) means otherwise. This value is applicable only to the Standby software version.
| |||||||||||||||||||||
| CslmSwRevName | 1.3.6.1.4.1.4515.1.3.1.12.1.3 | SoftwareRevision | RO | ||||||||||||||||||
column · SoftwareRevision · read-only · current The identification string of the system software revision. This value is taken from the content of the system software configuration data that is downloded with the rest of the software files. | |||||||||||||||||||||
| CslmSwRevDate | 1.3.6.1.4.1.4515.1.3.1.12.1.4 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The release date of the system software revision. This value is taken from the content of the system software configuration data that is downloded with the rest of the software files. | |||||||||||||||||||||
| SslmConfigSysUptime | 1.3.6.1.4.1.4515.1.3.1.13 | TimeTicks | RO | ||||||||||||||||||
scalar · TimeTicks · read-only · current The number of timer ticks at the last configuration command. | |||||||||||||||||||||
| SslmConfigSysSignalType | 1.3.6.1.4.1.4515.1.3.1.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This variable identifies whether a SONET or a SDH signal is used across this node. This value is configured by the NMS.
| |||||||||||||||||||||
| SslmRebootDelay | 1.3.6.1.4.1.4515.1.3.1.16 | INTEGER (0..300) | RW | ||||||||||||||||||
scalar · INTEGER (0..300) · read-write · current The number of seconds to wait before reboot. When this number equal to 0 the reboot should occur immediately. After the reboot command is initiated, the value of this object decrements accordingly. Initially, the object value is 0. It is also possible to change this value after starting the reboot process. Getting the value 0 means that there is no pending reboot process in the background. | |||||||||||||||||||||
| SslmVcatDelay | 1.3.6.1.4.1.4515.1.3.1.17 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The value of the VCAT delay as was read from the SEEP. | |||||||||||||||||||||
| SslmTid | 1.3.6.1.4.1.4515.1.3.1.18 | DisplayString (SIZE (0..20)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..20)) · read-write · current The SL TL1 name. | |||||||||||||||||||||
| SslmPsuNumber | 1.3.6.1.4.1.4515.1.3.1.19 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Let the NMS to configure the number of PSU in the system. If this number mismatch the reality, a mismatch alarm is declared. | |||||||||||||||||||||
| SslmOemType | 1.3.6.1.4.1.4515.1.3.1.20 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This value tells the NMS the type of the OEM. This value is read from the SEEP. | |||||||||||||||||||||
| SslmSysName | 1.3.6.1.4.1.4515.1.3.1.21 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current This value is the shadow of the sysName object. | |||||||||||||||||||||
| SslmSysLocation | 1.3.6.1.4.1.4515.1.3.1.22 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current This value is the shadow of the sysLocation object. | |||||||||||||||||||||
| SslmSysResetPm | 1.3.6.1.4.1.4515.1.3.1.23 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Writing 1 to this object reset the system PM counters. | |||||||||||||||||||||
| SslmSysUplinkRate | 1.3.6.1.4.1.4515.1.3.1.24 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object is used to configure the rate of the Uplink. The configured rate applies to both Uplink ports.
| |||||||||||||||||||||
| SslmSysChassisId | 1.3.6.1.4.1.4515.1.3.1.25 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object is used to configure the chassis-id. Node with the same value are considered to be stacked. | |||||||||||||||||||||
| SslmSysNetworkPrefix | 1.3.6.1.4.1.4515.1.3.1.26 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object is used to configure the Network Prefix. The prefix is used when the IP address of the node is assigned automatically. The automatic IP address of the node has the form A.x.y.z where x.y.z is the last 3 bytes of the MAC address 00:05:fd:x:y:z of the box. The A is the assigned Network Prefix. For example if the A is 10 and the MAC address is 00:05:fd:f6:55:11 the automatic IP of the node shall be 10.253.85.17. | |||||||||||||||||||||
| SslmSysLanIpAddr | 1.3.6.1.4.1.4515.1.3.1.27 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Node LAN IP Address. | |||||||||||||||||||||
| SslmSysLanSubnetAddr | 1.3.6.1.4.1.4515.1.3.1.28 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Node LAN Subnet Address. | |||||||||||||||||||||
| SslmPmAvailable | 1.3.6.1.4.1.4515.1.3.1.29 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current This value tells the NMS if the PM support is available. The value is taken from the SEEP and can not be changed. | |||||||||||||||||||||
| SslmPortsNumber | 1.3.6.1.4.1.4515.1.3.1.30 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of ports in the system. The value is taken from the SEEP. | |||||||||||||||||||||
| SslmEdfaNumber | 1.3.6.1.4.1.4515.1.3.1.31 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of EDFA units in the system. The value is taken from the SEEP. | |||||||||||||||||||||
| SslmMuxNumber | 1.3.6.1.4.1.4515.1.3.1.32 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of MUX units in the system. The value is taken from the SEEP. | |||||||||||||||||||||
| SslmOpticalSwitchExist | 1.3.6.1.4.1.4515.1.3.1.33 | TruthValue | RO | ||||||||||||||||||
scalar · TruthValue · read-only · current Should an Optical Switch unit exist in the system. The value is taken from the SEEP. | |||||||||||||||||||||
| SslmReadCommunity | 1.3.6.1.4.1.4515.1.3.1.34 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The SNMP read-only community. This object should be accessible only by the Admin users of the Web. | |||||||||||||||||||||
| SslmWriteCommunity | 1.3.6.1.4.1.4515.1.3.1.35 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The SNMP read-write community. This object should be accessible only by the Admin users of the Web. | |||||||||||||||||||||
| SslmSysEffectiveSubnetMask | 1.3.6.1.4.1.4515.1.3.1.36 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Effective Management subnetwork mask IP Address. | |||||||||||||||||||||
| SslmSysEffectiveIpAddr | 1.3.6.1.4.1.4515.1.3.1.37 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Effective Management IP Address. | |||||||||||||||||||||
| SslmSysLanEffectiveIpAddr | 1.3.6.1.4.1.4515.1.3.1.38 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Effective LAN IP Address. | |||||||||||||||||||||
| SslmSysLanEffectiveSubnetAddr | 1.3.6.1.4.1.4515.1.3.1.39 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Effective LAN subnetwork mask address. | |||||||||||||||||||||
| SslmSysGatewayEffectiveIpAddr | 1.3.6.1.4.1.4515.1.3.1.40 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Effective Gateway IP Address. | |||||||||||||||||||||
| SslmSysMode | 1.3.6.1.4.1.4515.1.3.1.41 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current System Mode configuration (this object applies to muxponder). | |||||||||||||||||||||
| SslmSysTrapFormat | 1.3.6.1.4.1.4515.1.3.1.42 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The format of the sent trap: 1 - the full ifIndex is sent. 2 - only the port number part of the ifIndex is sent.
| |||||||||||||||||||||
| SslmSysTemperature | 1.3.6.1.4.1.4515.1.3.1.43 | INTEGER | RO | 50 | |||||||||||||||||
scalar · INTEGER · read-only · current The temperature of the PL device in Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SslmNetworkMode | 1.3.6.1.4.1.4515.1.3.1.44 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current 1 - means that the LAN is define on a different vlan than the MNG ports. 2 - means that the LAN is on the same vlan and the MNG ports
| |||||||||||||||||||||
| Sslm40GConf | 1.3.6.1.4.1.4515.1.3.1.45 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current g40(0) - No 40G ports (service ports 3..10 are disabled) g41(1) - Single 40G Port 1 (service ports 7,8,9,10 are disabled) g42(2) - Single 40G Port 2 (service ports 3,4,5,6 are disabled) g43(3) - Dual 40G ports
| |||||||||||||||||||||
| SslmRstpEnabled | 1.3.6.1.4.1.4515.1.3.1.46 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current Enable/Disable the RSTP protocol. Defalut value is TRUE. | |||||||||||||||||||||
| SslmTopologyEnabled | 1.3.6.1.4.1.4515.1.3.1.47 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current Enable/Disable the topology discovery protocol. Defalut value is TRUE. | |||||||||||||||||||||
| SslmAdminCommunity | 1.3.6.1.4.1.4515.1.3.1.48 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The SNMP admin community. This object should be accessible only by the Admin users of the Web. | |||||||||||||||||||||
| SslmTrapCommunity | 1.3.6.1.4.1.4515.1.3.1.49 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The SNMP v1/v2c trap community. This object should be accessible only by the Admin users of the Web. | |||||||||||||||||||||
| SslmSysSnmpVersion | 1.3.6.1.4.1.4515.1.3.1.50 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The format of the sent trap: 3 - allow only SNMPv3 pdus. 4 - allow all pdus (coexistance mode).
| |||||||||||||||||||||
| SslmSysEncryptionCapability | 1.3.6.1.4.1.4515.1.3.1.51 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The encryption capability: 1 - No Encryption. 2 - Encryption Supported.
| |||||||||||||||||||||
| NslmAdmin | 1.3.6.1.4.1.4515.1.3.2 | ||||||||||||||||||||
| TslmAdminTable | 1.3.6.1.4.1.4515.1.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The admin table is used to supply the access level for the user login. | |||||||||||||||||||||
| RslmAdminEntry | 1.3.6.1.4.1.4515.1.3.2.1.1 | NA | |||||||||||||||||||
| CslmAdminLogin | 1.3.6.1.4.1.4515.1.3.2.1.1.3 | UserLogin | RC | ||||||||||||||||||
column · UserLogin · read-create · current The user login. | |||||||||||||||||||||
| CslmAdminPassword | 1.3.6.1.4.1.4515.1.3.2.1.1.4 | UserPassword | RC | ||||||||||||||||||
column · UserPassword · read-create · current The user password. | |||||||||||||||||||||
| CslmAdminRowStatus | 1.3.6.1.4.1.4515.1.3.2.1.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object is used to create and delete rows in the slmAdminTable. | |||||||||||||||||||||
| CslmAdminAccess | 1.3.6.1.4.1.4515.1.3.2.1.1.6 | AdminAccess | RC | ||||||||||||||||||
column · AdminAccess · read-create · current The user access level. | |||||||||||||||||||||
| CslmSnmpv3Auth | 1.3.6.1.4.1.4515.1.3.2.1.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The user SNMP v3 authentication mode.
| |||||||||||||||||||||
| CslmSnmpv3Priv | 1.3.6.1.4.1.4515.1.3.2.1.1.8 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The user SNMP v3 privacy mode.
| |||||||||||||||||||||
| CslmSnmpv3Password | 1.3.6.1.4.1.4515.1.3.2.1.1.9 | UserPassword | RC | ||||||||||||||||||
column · UserPassword · read-create · current The SNMP v3 Password | |||||||||||||||||||||
| NslmAuth | 1.3.6.1.4.1.4515.1.3.3 | ||||||||||||||||||||
| TslmAuthTable | 1.3.6.1.4.1.4515.1.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The authentication table is used for creating authentication requests. | |||||||||||||||||||||
| RslmAuthEntry | 1.3.6.1.4.1.4515.1.3.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry is used to compute the slmAuthCommunity based on the indexes Login and Password. Note that the table contains no data, and when using GetNext it apears to be empty. To compute the community the NMS should Get the field slmAuthCommunity with the corresponding indexes.
| |||||||||||||||||||||
| CslmAuthLogin | 1.3.6.1.4.1.4515.1.3.3.1.1.1 | UserLogin | NA | ||||||||||||||||||
column · UserLogin · not-accessible · current The user login. | |||||||||||||||||||||
| CslmAuthPassword | 1.3.6.1.4.1.4515.1.3.3.1.1.2 | UserPassword | NA | ||||||||||||||||||
column · UserPassword · not-accessible · current The user password. | |||||||||||||||||||||
| CslmAuthCommunity | 1.3.6.1.4.1.4515.1.3.3.1.1.3 | UserCommunity | RO | ||||||||||||||||||
column · UserCommunity · read-only · current The user community name correponds to slmAuthLogin and slmAuthPassword and which defines user'a access scope. The value of this object is available for reading only after the the first three colunms have been filled | |||||||||||||||||||||
| NslmLogin | 1.3.6.1.4.1.4515.1.3.4 | ||||||||||||||||||||
| NslmTrap | 1.3.6.1.4.1.4515.1.3.5 | ||||||||||||||||||||
| TslmTrapDestTable | 1.3.6.1.4.1.4515.1.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of trap destination entries. | |||||||||||||||||||||
| RslmTrapDestEntry | 1.3.6.1.4.1.4515.1.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry includes a destination IP address to which to send traps for this community. An entry in the table is created by the NMS. In order to keep the entry in the table the management should refresh the entry periodicaly. Otherwise it will be deleted by the GNE after 5 minutes.
| |||||||||||||||||||||
| CslmTrapDestAddress | 1.3.6.1.4.1.4515.1.3.5.1.1.1 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current A copy of slmTrapDestIpAddress represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. | |||||||||||||||||||||
| CslmTrapDestRowStatus | 1.3.6.1.4.1.4515.1.3.5.1.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object is used to create and delete rows in the trapDestTable. | |||||||||||||||||||||
| CslmTrapDestCommunity | 1.3.6.1.4.1.4515.1.3.5.1.1.3 | UserCommunity | RC | ||||||||||||||||||
column · UserCommunity · read-create · current A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity. This object may not be modified if the associated trapDestStatus object is equal to active(1). | |||||||||||||||||||||
| CslmTrapDestProtVersion | 1.3.6.1.4.1.4515.1.3.5.1.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The SNMP version of the traps which this manager expects to receive.
| |||||||||||||||||||||
| CslmTrapUserLogin | 1.3.6.1.4.1.4515.1.3.5.1.1.5 | UserLogin | RC | ||||||||||||||||||
column · UserLogin · read-create · current The user login. This is used to describe to the manager the current active login sessions. The NMS should read this value periodicaly in order to refresh its entry, otherwise the entry will be deleted by the GNE after a timeout of 5 minutes. | |||||||||||||||||||||
| CslmTrapUserAccess | 1.3.6.1.4.1.4515.1.3.5.1.1.6 | AdminAccess | RC | ||||||||||||||||||
column · AdminAccess · read-create · current The user access. | |||||||||||||||||||||
| CslmTrapEnable | 1.3.6.1.4.1.4515.1.3.5.1.1.7 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current TRUE - means that that the alarms are allowed. FALSE - means that all alarms should not be sent for this session. | |||||||||||||||||||||
| CslmTrapPort | 1.3.6.1.4.1.4515.1.3.5.1.1.8 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The destination port for to send the trap. The default value is 162. | |||||||||||||||||||||
| CslmTrapDestIpAddress | 1.3.6.1.4.1.4515.1.3.5.1.1.9 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current The address to send traps on behalf of this entry. This object may not be modified if the associated slmTrapDestStatus object is equal to active(1). | |||||||||||||||||||||
| TslmTrapLogTable | 1.3.6.1.4.1.4515.1.3.5.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of trap log entries. | |||||||||||||||||||||
| RslmTrapLogEntry | 1.3.6.1.4.1.4515.1.3.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the table keeps the log of a single trap.
| |||||||||||||||||||||
| CslmTrapLogId | 1.3.6.1.4.1.4515.1.3.5.2.1.1 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The trap log id. The id increments each time a new log entry arrives. | |||||||||||||||||||||
| CslmTrapLogName | 1.3.6.1.4.1.4515.1.3.5.2.1.2 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The object id of the trap. | |||||||||||||||||||||
| CslmTrapLogTimeStamp | 1.3.6.1.4.1.4515.1.3.5.2.1.3 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The trap time stamp. | |||||||||||||||||||||
| CslmTrapLogParam1 | 1.3.6.1.4.1.4515.1.3.5.2.1.4 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The first parameter of the trap. | |||||||||||||||||||||
| CslmTrapLogParam2 | 1.3.6.1.4.1.4515.1.3.5.2.1.5 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The second parameter of the trap. | |||||||||||||||||||||
| CslmTrapLogParam3 | 1.3.6.1.4.1.4515.1.3.5.2.1.6 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The third parameter of the trap. | |||||||||||||||||||||
| CslmTrapLogParam4 | 1.3.6.1.4.1.4515.1.3.5.2.1.7 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The forth parameter of the trap. | |||||||||||||||||||||
| CslmTrapLogParam5 | 1.3.6.1.4.1.4515.1.3.5.2.1.8 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The fifth parameter of the trap. | |||||||||||||||||||||
| CslmTrapLogParam6 | 1.3.6.1.4.1.4515.1.3.5.2.1.9 | OCTET STRING (SIZE (0..80)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..80)) · read-only · current The sixth parameter of the trap. | |||||||||||||||||||||
| !slmTrapSoftwareStatusChange | 1.3.6.1.4.1.4515.1.3.5.4 | ||||||||||||||||||||
notification · current A slmTrapSoftwareStatusChange trap is sent when the value of the slmSwRevStatus of one of the directories changes.
| |||||||||||||||||||||
| !slmTrapSysNameChange | 1.3.6.1.4.1.4515.1.3.5.5 | ||||||||||||||||||||
notification · current A slmTrapSysNameChange trap is sent when the value of the slmSysName is changed.
| |||||||||||||||||||||
| !slmTrapSysLocationChange | 1.3.6.1.4.1.4515.1.3.5.6 | ||||||||||||||||||||
notification · current A slmTrapSysLocationChange trap is sent when the value of the slmSysLocation is changed.
| |||||||||||||||||||||
| TslmSyslogDestTable | 1.3.6.1.4.1.4515.1.3.5.7 | NA | |||||||||||||||||||
table · not-accessible · current A list of syslog destination entries. | |||||||||||||||||||||
| RslmSyslogDestEntry | 1.3.6.1.4.1.4515.1.3.5.7.1 | NA | |||||||||||||||||||
row · not-accessible · current This entry includes a destination IP addresses to which to send log messages.
| |||||||||||||||||||||
| CslmSyslogDestAddress | 1.3.6.1.4.1.4515.1.3.5.7.1.1 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current A copy of slmSyslogDestTable represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. | |||||||||||||||||||||
| CslmSyslogDestRowStatus | 1.3.6.1.4.1.4515.1.3.5.7.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object is used to create and delete rows in the slmSyslogDestTable. | |||||||||||||||||||||
| CslmSyslogLevel | 1.3.6.1.4.1.4515.1.3.5.7.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The level of log messages which this manager expects to receive.
| |||||||||||||||||||||
| CslmSyslogPort | 1.3.6.1.4.1.4515.1.3.5.7.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The destination port for to send the log message. The default value is 514. | |||||||||||||||||||||
| CslmSyslogDestIpAddress | 1.3.6.1.4.1.4515.1.3.5.7.1.5 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current The address to send log messages on behalf of this entry. | |||||||||||||||||||||
| NslmLogFile | 1.3.6.1.4.1.4515.1.3.8 | ||||||||||||||||||||
| NslmConfigFile | 1.3.6.1.4.1.4515.1.3.9 | ||||||||||||||||||||
| NslmChPass | 1.3.6.1.4.1.4515.1.3.12 | ||||||||||||||||||||
| TslmChPassTable | 1.3.6.1.4.1.4515.1.3.12.1 | NA | |||||||||||||||||||
table · not-accessible · current The table is used for changing the user passowrd. | |||||||||||||||||||||
| RslmChPassEntry | 1.3.6.1.4.1.4515.1.3.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry is used to set the slmChPassNewPass. Note that the table contains no data, and when using GetNext it apears to be empty. To change the password, the NMS should issue a SET command with the new password while the two indexes equal to the old user login and password. | |||||||||||||||||||||
| CslmChPassLogin | 1.3.6.1.4.1.4515.1.3.12.1.1.1 | UserLogin | NA | ||||||||||||||||||
column · UserLogin · not-accessible · current The user login. | |||||||||||||||||||||
| CslmChPassOldPass | 1.3.6.1.4.1.4515.1.3.12.1.1.2 | UserPassword | NA | ||||||||||||||||||
column · UserPassword · not-accessible · current The user password. | |||||||||||||||||||||
| CslmChPassNewPass | 1.3.6.1.4.1.4515.1.3.12.1.1.3 | UserPassword | RW | ||||||||||||||||||
column · UserPassword · read-write · current The user password. | |||||||||||||||||||||
| NslmLicense | 1.3.6.1.4.1.4515.1.3.17 | ||||||||||||||||||||
| TslmLicenseTable | 1.3.6.1.4.1.4515.1.3.17.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of License entries. | |||||||||||||||||||||
| RslmLicenseEntry | 1.3.6.1.4.1.4515.1.3.17.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the table correspond to installed license.
| |||||||||||||||||||||
| CslmLicenseIndex | 1.3.6.1.4.1.4515.1.3.17.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The license index. | |||||||||||||||||||||
| CslmLicenseExpiration | 1.3.6.1.4.1.4515.1.3.17.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The number of seconds to expiration. Value -1 for permanent. | |||||||||||||||||||||
| CslmLicenseId | 1.3.6.1.4.1.4515.1.3.17.1.1.3 | DisplayString (SIZE (0..80)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..80)) · read-only · current The license text | |||||||||||||||||||||
Textual conventions
AdminAccessINTEGERadmin(4)none(0)provisioning(3)read(1)readwrite(2)trap(5)The administration access level.
SoftwareRevisionDisplayString (SIZE (1..20))The Software Revision Name.
UserCommunityDisplayString (SIZE (1..20))The User Community Type.
UserLoginDisplayString (SIZE (1..20))The User Login Type.
UserPasswordDisplayString (SIZE (1..20))The User Password Type.
Traps / Notifications
- slmTrapSoftwareStatusChange
1.3.6.1.4.1.4515.1.3.5.4 - slmTrapSysLocationChange
1.3.6.1.4.1.4515.1.3.5.6 - slmTrapSysNameChange
1.3.6.1.4.1.4515.1.3.5.5