SL-DRY-CON-MIB
PacketLight Networks Ltd.This MIB module describes the Dry Contacts.
snmptranslate -m SL-DRY-CON-MIB -Tpsnmpwalk -v2c -c <community> -m SL-DRY-CON-MIB <host> 1.3.6.1.4.1.4515.1.7Imports
| IF-MIB | InterfaceIndex, ifIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslDryConMib | 1.3.6.1.4.1.4515.1.7 | |||
identity This MIB module describes the Dry Contacts. | ||||
| NslDryConOut | 1.3.6.1.4.1.4515.1.7.1 | |||
| SslDryConAlarmCutoff | 1.3.6.1.4.1.4515.1.7.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this variable cause to Alarms Cutoff.
| ||||
| TslDryConOutTable | 1.3.6.1.4.1.4515.1.7.1.2 | NA | ||
table · not-accessible · current The Dry Contact Out table configure the dry contact outputs. | ||||
| RslDryConOutEntry | 1.3.6.1.4.1.4515.1.7.1.2.1 | NA | ||
| CslDryConOutIndex | 1.3.6.1.4.1.4515.1.7.1.2.1.1 | INTEGER (1..4) | RO | |
column · INTEGER (1..4) · read-only · current The index of the output dry contact. | ||||
| CslDryConOutCommand | 1.3.6.1.4.1.4515.1.7.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this object controls the output dry contact state: activate(1) - activate the output dry contact deactivate(2) - dectivate the output dry contact clear(3) - clears the output dry contact command The object value can also be read by the management. In this case the agent should return the current command to the management. The object value should not be kept in the NVRAM because it is used only for testing. The intial value should be clear(3).
| ||||
| CslDryConOutActiveStatus | 1.3.6.1.4.1.4515.1.7.1.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The current status of the output dry contact: TRUE - means that it is currently active FLASE - means that it is not active | ||||
| NslDryConIn | 1.3.6.1.4.1.4515.1.7.2 | |||
| SslDryConLastChange | 1.3.6.1.4.1.4515.1.7.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The Sys Uptime at the last input change.
| ||||
| TslDryConInTable | 1.3.6.1.4.1.4515.1.7.2.2 | NA | ||
table · not-accessible · current The Dry Contact In table describes the dry contacts inputs. | ||||
| RslDryConInEntry | 1.3.6.1.4.1.4515.1.7.2.2.1 | NA | ||
| CslDryConInIndex | 1.3.6.1.4.1.4515.1.7.2.2.1.1 | INTEGER (1..4) | RO | |
column · INTEGER (1..4) · read-only · current The index of the input dry contact. | ||||
| CslDryConInDescription | 1.3.6.1.4.1.4515.1.7.2.2.1.2 | DisplayString (SIZE (0..40)) | RW | |
column · DisplayString (SIZE (0..40)) · read-write · current A textual description of the input dry contact alarm. | ||||
| CslDryConInSeverity | 1.3.6.1.4.1.4515.1.7.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current A severity of the input dry contact alarm.
| ||||
| CslDryConInEnable | 1.3.6.1.4.1.4515.1.7.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable the input dry contact alarm report generation.
| ||||
| CslDryConInPolarity | 1.3.6.1.4.1.4515.1.7.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the input dry contact alarm polarity.
| ||||
| CslDryConInStatus | 1.3.6.1.4.1.4515.1.7.2.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Describe the current input dry contact alarm status.
| ||||
| CslDryConInAlmType | 1.3.6.1.4.1.4515.1.7.2.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Describe the current input dry contact alarm type.
| ||||
| NslDryConTraps | 1.3.6.1.4.1.4515.1.7.3 | |||
| !slDryConStatusChangeTrap | 1.3.6.1.4.1.4515.1.7.3.1 | |||
notification · current An slDryConStatusChangeTrap notification is sent when the the Status of an input dry contact is changed and the corresponding alarm is enabled. In order to shoten the Trap, the DisplayString that describes the alarm is not sent. To find out this string the NMS should use the index and get it from the table. | ||||
Traps / Notifications
- slDryConStatusChangeTrap
1.3.6.1.4.1.4515.1.7.3.1