SL-ALS-MIB
PacketLight Networks Ltd.This MIB module describes the SiteLight ALS feature.
snmptranslate -m SL-ALS-MIB -Tpsnmpwalk -v2c -c <community> -m SL-ALS-MIB <host> 1.3.6.1.4.1.4515.1.12Imports
| IF-MIB | InterfaceIndex, ifIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount, PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslAlsMib | 1.3.6.1.4.1.4515.1.12 | |||
identity This MIB module describes the SiteLight ALS feature. | ||||
| NslAlsConfig | 1.3.6.1.4.1.4515.1.12.1 | |||
| TslAlsConfigTable | 1.3.6.1.4.1.4515.1.12.1.1 | NA | ||
table · not-accessible · current The ALS configuration Table. | ||||
| RslAlsConfigEntry | 1.3.6.1.4.1.4515.1.12.1.1.1 | NA | ||
row · not-accessible · current The entries exist for active optical inetfaces ifType = 196. The objects in this table are used to configure the ALS algorithm.
| ||||
| CslAlsMode | 1.3.6.1.4.1.4515.1.12.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational.
| ||||
| CslAlsLosDeclareTime | 1.3.6.1.4.1.4515.1.12.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Time to declare optical LOS present or clear: 550 +- 50 msec.
| ||||
| CslAlsTestPulseTime | 1.3.6.1.4.1.4515.1.12.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Manual restart for test Pulse time (in manual restart) - 90+-10 sec.
| ||||
| CslAlsManualPulseTime | 1.3.6.1.4.1.4515.1.12.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Manual restart Pulse time (in manual mode) - 2+-0.25 sec.
| ||||
| CslAlsAutomaticPulseTime | 1.3.6.1.4.1.4515.1.12.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec.
| ||||
| CslAlsAutomaticDelayTime | 1.3.6.1.4.1.4515.1.12.1.1.1.6 | INTEGER (60..300) | RW | |
column · INTEGER (60..300) · read-write · current In Automatic mode. The delay between two laser re-activations. | ||||
| CslAlsLaserTestActivate | 1.3.6.1.4.1.4515.1.12.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Activate the laser for test operation.
| ||||
| CslAlsLaserManualActivate | 1.3.6.1.4.1.4515.1.12.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Activate the laser manual operation.
| ||||
| CslAlsOperStatus | 1.3.6.1.4.1.4515.1.12.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational.
| ||||
| CslAlsResetParams | 1.3.6.1.4.1.4515.1.12.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this variable to 1 will reset the ALS parameters to the factory defaults.
| ||||
| NslAlsTraps | 1.3.6.1.4.1.4515.1.12.2 | |||
| !slAlsStatusChangeTrap | 1.3.6.1.4.1.4515.1.12.2.1 | |||
notification · current A slAlsStatusChangeTrap is sent when the TX laser status is changed.
| ||||
Traps / Notifications
- slAlsStatusChangeTrap
1.3.6.1.4.1.4515.1.12.2.1