PACKETFLUX-POWERCONTROL-MIB
PacketFlux Technologies, Inc.MIB for PacketFlux Devices containing one or more Ports with Power Control such as PowerControl Ports or PDU's
snmptranslate -m PACKETFLUX-POWERCONTROL-MIB -Tpsnmpwalk -v2c -c <community> -m PACKETFLUX-POWERCONTROL-MIB <host> 1.3.6.1.4.1.32050.3.3Imports
| PACKETFLUX-SMI | packetfluxFeatureSpecific |
|---|---|
| PACKETFLUX-TC | Fixed1DecimalDigit, Fixed6DecimalDigits |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IpacketfluxPowerControl | 1.3.6.1.4.1.32050.3.3 | |||
identity MIB for PacketFlux Devices containing one or more Ports with Power Control such as PowerControl Ports or PDU's | ||||
| TpowerControlPortsTable | 1.3.6.1.4.1.32050.3.3.1 | NA | ||
table · not-accessible · current Contains data about the power injection ports installed in the device. | ||||
| RpowerControlPortsEntry | 1.3.6.1.4.1.32050.3.3.1.1 | NA | ||
row · not-accessible · current A single row of the injectionPorts table
| ||||
| CportSlotNumber | 1.3.6.1.4.1.32050.3.3.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The slot this injection port is installed in. | ||||
| CportPortNumber | 1.3.6.1.4.1.32050.3.3.1.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port number in the slot which corresponds to this injection port. | ||||
| CportDescription | 1.3.6.1.4.1.32050.3.3.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current The user-settable description for this port. This should be used to label the port so it is easier for humans to identify what is attached to the port. | ||||
| CportPowerEnabled | 1.3.6.1.4.1.32050.3.3.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Whether the power is enabled for this port. | ||||
| CportPowerTripped | 1.3.6.1.4.1.32050.3.3.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Whether the power has been shut down due to the detection of an overcurrent or other fault. This value overrides the powerEnabled value when true, ensuring that a port is shut down on fault. Write a '0'(false) to this OID to reset the trip. | ||||
| CportCycleTimeout | 1.3.6.1.4.1.32050.3.3.1.1.6 | Fixed1DecimalDigit | RW | |
column · Fixed1DecimalDigit · read-write · current The number of seconds which remain in a port Cycle. Write a timer value to this OID to either start a cycle on the port (if this value is currently zero), or to change the amount of time left in the cycle (if a cycle is already in progress). A cycle will always toggle the current state of the port. So if the power on a port is disabled, writing a value to this OID will turn the port on, then back off which may not be what the operator desires.
| ||||
| CportPowerEnabledAtReset | 1.3.6.1.4.1.32050.3.3.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current The power status for this port after a card power cycle or reset. | ||||
| CportTimingPulseEnabled | 1.3.6.1.4.1.32050.3.3.1.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current Some power control points permit the injection of a timing pulse. This OID shows whether that pulse is enabled (if the port supports it). | ||||
| CportTimingPulseEnabledAtReset | 1.3.6.1.4.1.32050.3.3.1.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Some power control points permit the injection of a timing pulse. This OID shows whether that pulse is enabled (if the port supports it) after a power cycle or reset. | ||||
| CportTimingPulseStyle | 1.3.6.1.4.1.32050.3.3.1.1.10 | TimingPulseStyleEnum | RW | |
column · TimingPulseStyleEnum · read-write · current Some power control points permit the injection of a timing pulse. This OID shows the type of timing pulse supported by this port. | ||||
| CportOutputVoltage | 1.3.6.1.4.1.32050.3.3.1.1.11 | Fixed6DecimalDigits | RO | |
column · Fixed6DecimalDigits · read-only · current The output voltage for this port. Depending on the architecture of the injection card, this value may reflect either the switched or non-switched voltage.
| ||||
| CportCurrent | 1.3.6.1.4.1.32050.3.3.1.1.12 | Fixed6DecimalDigits | RO | |
column · Fixed6DecimalDigits · read-only · current The current draw of the device attached to the port. It may also include some power consumed by the injection port itself. Note that this is reported from the controller with 6 fixed decimal digits which is enough to correctly represent mA and uA ranges. Some SNMP tools will automatically put the decimal in the right spot. If not, you will need to divide this value by 1,000,000 to get the value in Amps. If you'd prefer this report in mA, you will need to either multiply or divide the value by 1000, depending on whether your SNMP tool correctly places the decimal point for Amps or not.
| ||||
| CportNumberOfPowerTransitions | 1.3.6.1.4.1.32050.3.3.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that the power has been turned from on to off or from off to on on this port (A power cycle will count as two). | ||||
| CportNumberOfTripEvents | 1.3.6.1.4.1.32050.3.3.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times which the port has transitioned from a normal to a tripped state. | ||||
| NpacketfluxPowerControlConformance | 1.3.6.1.4.1.32050.3.3.127 | |||
| NpacketfluxPowerControlGroups | 1.3.6.1.4.1.32050.3.3.127.1 | |||
| GpacketfluxPowerControlAllObjects | 1.3.6.1.4.1.32050.3.3.127.1.1 | |||
group · current This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP | ||||
Textual conventions
TimingPulseStyleEnumINTEGERcambium(4)canopy(3)notsupported(1)unknown(2)