OMNITRON-POE-MIB
Omnitron Systems TechnologyOmnitron PoE MIB for use with iConverter Management Modules v5.3 and NetOutlook. Copyright 2016 Omnitron Systems Technology, Inc. All rights reserved.
snmptranslate -m OMNITRON-POE-MIB -Tpsnmpwalk -v2c -c <community> -m OMNITRON-POE-MIB <host> 1.3.6.1.4.1.7342.15Imports
| OMNITRON-TC-MIB | OstFloatValue, OstIpAddr, OstPortSingleIndex, omnitron |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IomnitronPoeMib | 1.3.6.1.4.1.7342.15 | ||||||||||||
identity Omnitron PoE MIB for use with iConverter Management Modules v5.3 and NetOutlook. Copyright 2016 Omnitron Systems Technology, Inc. All rights reserved. | |||||||||||||
| NostPoeGlobalCfgTable | 1.3.6.1.4.1.7342.15.1 | ||||||||||||
| SostPoeGlobalCfgPwrLimitationEnable | 1.3.6.1.4.1.7342.15.1.1 | TruthValue | RW | 2 | |||||||||
scalar · TruthValue · read-write · current This object specifies whether the PoE PSE power limiting function is enabled. The value 'true' indicates that PoE PSE limiting is enabled. The value 'false' indicates that PoE PSE limiting is disabled. Example values from LibreNMS test devices
| |||||||||||||
| SostPoeGlobalCfgTotalPwr | 1.3.6.1.4.1.7342.15.1.2 | OstFloatValue | RO | 4.2815 | |||||||||
scalar · OstFloatValue · read-only · current This object indicates the total power sourced in Watts. Example values from LibreNMS test devices
| |||||||||||||
| TostPoePortCfgTable | 1.3.6.1.4.1.7342.15.2 | NA | |||||||||||
table · not-accessible · current This table supports the port PoE configurations. | |||||||||||||
| RostPoePortCfgEntry | 1.3.6.1.4.1.7342.15.2.1 | NA | |||||||||||
| CostPoePortCfgIndex | 1.3.6.1.4.1.7342.15.2.1.1 | OstPortSingleIndex | NA | ||||||||||
column · OstPortSingleIndex · not-accessible · current An index that is used to identify a specific PoE port number. | |||||||||||||
| CostPoePortPseEnable | 1.3.6.1.4.1.7342.15.2.1.2 | INTEGER | RW | pseEnabled(2) | |||||||||
column · INTEGER · read-write · current This object is the PoE PSE port enable. pseDisabled(1) PSE power source is disabled pseEnabled(2) PSE power source is enabled
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortPseMaxMode | 1.3.6.1.4.1.7342.15.2.1.3 | INTEGER | RW | pseMaxAuto(1) | |||||||||
column · INTEGER · read-write · current The object is the PoE maximum mode enable. This is the same control as the physical DIP switch. pseMaxNotAvail PSE maximum mode function not available pseMaxAuto(1) PSE maximum mode auto enabled pseMaxForce(2) PSE maximum mode force enabled The maximum power supplied is dependent upon the part number. For instance: '8991S' devices can supply a maximum power of 30W '8991T' devices can supply a maximum power of 60W '8991U' devices can supply a maximum power of 75W '8991V' devices can supply a maximum power of 90W
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortPdMode | 1.3.6.1.4.1.7342.15.2.1.4 | INTEGER | RO | pdModeClass4(8) | |||||||||
column · INTEGER · read-only · current This object is the PoE PD classification mode. pdModeNotDetected(1) PD is not detected pdModeNotClassified(2) PD is not classified pdModeFailure(3) PD classification failure pdModeClass0(4) PD is 802.3af Class 0 15W device pdModeClass1(5) PD is 802.3af Class 1 4W device pdModeClass2(6) PD is 802.3af Class 2 7W device pdModeClass3(7) PD is 802.3af Class 3 15W device pdModeClass4(8) PD is 802.3at Class 4 30W device pdMode60W(9) PD is 60W device pdMode75W(10) PD is 75W device pdMode90W(11) PD is 90W device
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortPseVoltageSupplied | 1.3.6.1.4.1.7342.15.2.1.5 | OstFloatValue | RO | 55.14 | |||||||||
column · OstFloatValue · read-only · current This object indicates the voltage output from the PSE port in volts. Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortPseCurrentSupplied | 1.3.6.1.4.1.7342.15.2.1.6 | OstFloatValue | RO | 76.78 | |||||||||
column · OstFloatValue · read-only · current This object indicates the current output from the PSE port in mA (milliamps). Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortPseStatus | 1.3.6.1.4.1.7342.15.2.1.7 | INTEGER | RW | pdNormal(2) | |||||||||
column · INTEGER · read-write · current This object is the PoE PSE port status. notApplicable(1) PD device not connected or port disabled pdNormal(2) PD device is being powered fully pdOverCurrent(3) PD device is consuming too much current pdBrownOut(4) PD device is not fully powered pdInsufficientPower(5) PD device not powered due to lack of power A write to this object restarts the PSE function and classification.
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatEnable | 1.3.6.1.4.1.7342.15.2.1.8 | INTEGER | RW | heartbeatDisabled(1) | |||||||||
column · INTEGER · read-write · current This object is the PoE PSE heartbeat enable. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatEnabled(2) PSE PD heartbeat is enabled
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatIpAddress | 1.3.6.1.4.1.7342.15.2.1.9 | IpAddress | RW | 0.0.0.0 | |||||||||
column · IpAddress · read-write · current This object is the PoE PD heartbeat IPv4 address to ping. Setting this object also impacts the ostPoePortHeartbeatIpAddressString returned value. If an IPv4 address is written to this object the two objects return the same value. If ostPoePortHeartbeatIpAddressString is set with an IPv6 address then ostPoePortHeartbeatIpAddress returns an all zeros value. Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatInterval | 1.3.6.1.4.1.7342.15.2.1.10 | Unsigned32 (1..300) | RW | 1 | |||||||||
column · Unsigned32 (1..300) · read-write · current This object is the PoE PSE PD heartbeat transmission interval in seconds. Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatErrorDetection | 1.3.6.1.4.1.7342.15.2.1.11 | Unsigned32 (1..100) | RW | 3 | |||||||||
column · Unsigned32 (1..100) · read-write · current This object is the PoE PSE PD heartbeat number of consecutively lost heartbeat pings before an errored condition is declared. The number of consecutive error counts is cleared when a valid heartbeat response is received. Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatErrorAction | 1.3.6.1.4.1.7342.15.2.1.12 | INTEGER | RW | errorLostIgnored(1) | |||||||||
column · INTEGER · read-write · current This object is the PoE PSE heartbeat errored condition action.
errorLostIgnored(1) PD heartbeat errored condition is ignored
errorRestart(2) PD heartbeat errored condition results
in a restart
errorShutdown(3) PD heartbeat errored condition results
in a shutdown (power removed)
Example values from LibreNMS test devices
| |||||||||||||
| CostPoePortHeartbeatNumberRestarts | 1.3.6.1.4.1.7342.15.2.1.13 | Unsigned32 (0..16384) | RW | 0 | |||||||||
column · Unsigned32 (0..16384) · read-write · current This object is the PoE PSE PD number of restarts when an errored hearbeat condition occurs. This object is only used when ostPoePortHeartbeatErrorAction is configured as 'errorRestart' A value of zero indicates restarts never stop. Example values from LibreNMS test devices
| |||||||||||||
| CostPoEPortHeartbeatStatus | 1.3.6.1.4.1.7342.15.2.1.14 | INTEGER | RO | heartbeatDisabled(1) | |||||||||
column · INTEGER · read-only · current This object is the PoE PSE PD heartbeat status. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatAvailable(2) PSE PD heartbeats are being received heartbeatErrored(3) PSE PD heartbeat is in an errored condition heartbeatRestart(4) PSE PD heartbeat error has caused a PSE restart heartbeatShutdown(5) PSE PD heartbeat error has caused a PSE shutdown
Example values from LibreNMS test devices
| |||||||||||||
| CostPoEPortHeartbeatDeferTime | 1.3.6.1.4.1.7342.15.2.1.15 | Unsigned32 (1..300) | RW | ||||||||||
column · Unsigned32 (1..300) · read-write · current This object is the PoE heartbeat PSE PD heartbeat transmission delay interval in seconds after the port has been reenabled. The delay is the amount of time after power has been applied before the heartbeat function starts and hence the detection of heartbeat errors. | |||||||||||||
| CostPoePortHeartbeatIpAddressString | 1.3.6.1.4.1.7342.15.2.1.16 | OstIpAddr | RW | ||||||||||
column · OstIpAddr · read-write · current This object is the PoE PD heartbeat IPv4 or IPv6 address to ping. Setting this object also impacts the ostPoePortHeartbeatIpAddress returned value. If an IPv4 address is written to this object the two objects return the same value. If this object is set with an IPv6 address then ostPoePortHeartbeatIpAddress returns an all zeros value. | |||||||||||||
| NostPoeCompliances | 1.3.6.1.4.1.7342.15.3 | ||||||||||||
| MostPoeCompliance | 1.3.6.1.4.1.7342.15.3.2 | ||||||||||||
| NostPoeGroups | 1.3.6.1.4.1.7342.15.4 | ||||||||||||
| GostPoeGroup | 1.3.6.1.4.1.7342.15.4.1 | ||||||||||||
group · current Mandatory objects for the PoE functional group.
| |||||||||||||