RAPID-IPSEC-SA-MON-MIB-EXT
RapidStream, Inc.The MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and RapidStream's extension.
snmptranslate -m RAPID-IPSEC-SA-MON-MIB-EXT -Tpsnmpwalk -v2c -c <community> -m RAPID-IPSEC-SA-MON-MIB-EXT <host> 1.3.6.1.4.1.4355.3Imports
| IF-MIB | ifIndex |
|---|---|
| IPSEC-ISAKMP-IKE-DOI-TC | IpsecDoiAhTransform, IpsecDoiAuthAlgorithm, IpsecDoiEncapsulationMode, IpsecDoiEspTransform, IpsecDoiIdentType, IpsecDoiIpcompTransform, IpsecDoiSecProtocolId |
| RAPID-MIB | rapidstream |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrsIpsecSaMonModule | 1.3.6.1.4.1.4355.3 | |||
identity The MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and RapidStream's extension. | ||||
| NrsIpsecSaMonitorMIB | 1.3.6.1.4.1.4355.3.1 | |||
node · current This is the base object identifier for all IPSec branches. | ||||
| NrsSaTables | 1.3.6.1.4.1.4355.3.1.1 | |||
node · current This is the base object identifier for all SA tables. | ||||
| TrsIpsecSaEspInTable | 1.3.6.1.4.1.4355.3.1.1.1 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound ESP SAs. There should be one row for every inbound ESP security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaEspInEntry | 1.3.6.1.4.1.4355.3.1.1.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound ESP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaEspInAddress | 1.3.6.1.4.1.4355.3.1.1.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaEspInSpi | 1.3.6.1.4.1.4355.3.1.1.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CrsIpsecSaEspInDestId | 1.3.6.1.4.1.4355.3.1.1.1.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchanged during SA creation negotiation. | ||||
| CrsIpsecSaEspInDestIdType | 1.3.6.1.4.1.4355.3.1.1.1.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaEspInDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaEspInSourceId | 1.3.6.1.4.1.4355.3.1.1.1.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CrsIpsecSaEspInSourceIdType | 1.3.6.1.4.1.4355.3.1.1.1.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaEspInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaEspInProtocol | 1.3.6.1.4.1.4355.3.1.1.1.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaEspInDestPort | 1.3.6.1.4.1.4355.3.1.1.1.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaEspInSourcePort | 1.3.6.1.4.1.4355.3.1.1.1.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaEspInCreator | 1.3.6.1.4.1.4355.3.1.1.1.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaEspInEncapsulation | 1.3.6.1.4.1.4355.3.1.1.1.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaEspInEncAlg | 1.3.6.1.4.1.4355.3.1.1.1.1.12 | IpsecDoiEspTransform | RO | |
column · IpsecDoiEspTransform · read-only · current A unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used. | ||||
| CrsIpsecSaEspInEncKeyLength | 1.3.6.1.4.1.4355.3.1.1.1.1.13 | Integer32 (0..65531) | RO | |
column · Integer32 (0..65531) · read-only · current The length of the encryption key in bits used for the algorithm specified in the 'rsIpsecSaEspInEncAlg' object, or 0 if the key length is implicit in the specified algorithm or there is no encryption specified.
| ||||
| CrsIpsecSaEspInAuthAlg | 1.3.6.1.4.1.4355.3.1.1.1.1.14 | IpsecDoiAuthAlgorithm | RO | |
column · IpsecDoiAuthAlgorithm · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CrsIpsecSaEspInLimitSeconds | 1.3.6.1.4.1.4355.3.1.1.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CrsIpsecSaEspInLimitKbytes | 1.3.6.1.4.1.4355.3.1.1.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in kilobytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CrsIpsecSaEspInAccSeconds | 1.3.6.1.4.1.4355.3.1.1.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CrsIpsecSaEspInAccKbytes | 1.3.6.1.4.1.4355.3.1.1.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CrsIpsecSaEspInUserOctets | 1.3.6.1.4.1.4355.3.1.1.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CrsIpsecSaEspInPackets | 1.3.6.1.4.1.4355.3.1.1.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CrsIpsecSaEspInDecryptErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to decryption errors. | ||||
| CrsIpsecSaEspInAuthErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to authentication errors. | ||||
| CrsIpsecSaEspInReplayErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to replay errors. | ||||
| CrsIpsecSaEspInPolicyErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to policy errors. This includes packets where the next protocol is invalid. | ||||
| CrsIpsecSaEspInPadErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to pad value errors. Implementations that do not check this must not support this object. | ||||
| CrsIpsecSaEspInOtherReceiveErrors | 1.3.6.1.4.1.4355.3.1.1.1.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the decryption element. | ||||
| TrsIpsecSaAhInTable | 1.3.6.1.4.1.4355.3.1.1.2 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound AH SAs. There should be one row for every inbound AH security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaAhInEntry | 1.3.6.1.4.1.4355.3.1.1.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound AH SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaAhInAddress | 1.3.6.1.4.1.4355.3.1.1.2.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaAhInSpi | 1.3.6.1.4.1.4355.3.1.1.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CrsIpsecSaAhInDestId | 1.3.6.1.4.1.4355.3.1.1.2.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CrsIpsecSaAhInDestIdType | 1.3.6.1.4.1.4355.3.1.1.2.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaAhInDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaAhInSourceId | 1.3.6.1.4.1.4355.3.1.1.2.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CrsIpsecSaAhInSourceIdType | 1.3.6.1.4.1.4355.3.1.1.2.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaAhInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaAhInProtocol | 1.3.6.1.4.1.4355.3.1.1.2.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaAhInDestPort | 1.3.6.1.4.1.4355.3.1.1.2.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaAhInSourcePort | 1.3.6.1.4.1.4355.3.1.1.2.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaAhInCreator | 1.3.6.1.4.1.4355.3.1.1.2.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaAhInEncapsulation | 1.3.6.1.4.1.4355.3.1.1.2.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaAhInAuthAlg | 1.3.6.1.4.1.4355.3.1.1.2.1.12 | IpsecDoiAhTransform | RO | |
column · IpsecDoiAhTransform · read-only · current A unique value representing the hash algorithm applied to traffic carried by this SA if it uses ESP or 0 if there is no authentication applied by ESP. | ||||
| CrsIpsecSaAhInLimitSeconds | 1.3.6.1.4.1.4355.3.1.1.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CrsIpsecSaAhInLimitKbytes | 1.3.6.1.4.1.4355.3.1.1.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CrsIpsecSaAhInAccSeconds | 1.3.6.1.4.1.4355.3.1.1.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CrsIpsecSaAhInAccKbytes | 1.3.6.1.4.1.4355.3.1.1.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CrsIpsecSaAhInUserOctets | 1.3.6.1.4.1.4355.3.1.1.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CrsIpsecSaAhInPackets | 1.3.6.1.4.1.4355.3.1.1.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CrsIpsecSaAhInAuthErrors | 1.3.6.1.4.1.4355.3.1.1.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to authentication errors. | ||||
| CrsIpsecSaAhInReplayErrors | 1.3.6.1.4.1.4355.3.1.1.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to replay errors. | ||||
| CrsIpsecSaAhInPolicyErrors | 1.3.6.1.4.1.4355.3.1.1.2.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to policy errors. This includes packets where the next protocol is invalid. | ||||
| CrsIpsecSaAhInOtherReceiveErrors | 1.3.6.1.4.1.4355.3.1.1.2.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the authentication element. | ||||
| TrsIpsecSaIpcompInTable | 1.3.6.1.4.1.4355.3.1.1.3 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound IPCOMP SAs. There should be one row for every inbound IPCOMP (security) association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaIpcompInEntry | 1.3.6.1.4.1.4355.3.1.1.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound IPCOMP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaIpcompInAddress | 1.3.6.1.4.1.4355.3.1.1.3.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaIpcompInCpi | 1.3.6.1.4.1.4355.3.1.1.3.1.2 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current The CPI of the SA. Since the lower values of CPIs are reserved to be the same as the algorithm, the syntax for this object is the same as the transform. | ||||
| CrsIpsecSaIpcompInDestId | 1.3.6.1.4.1.4355.3.1.1.3.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode, or 0 if this SA is used with multiple SAs in protection suites. This value, if non-zero, is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CrsIpsecSaIpcompInDestIdType | 1.3.6.1.4.1.4355.3.1.1.3.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaIpcompInDestId', or 0 if unknown or if the SA uses transport mode, or 0 if this SA is used with multiple SAs in protection suites. | ||||
| CrsIpsecSaIpcompInSourceId | 1.3.6.1.4.1.4355.3.1.1.3.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. This value, if non-zero, is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CrsIpsecSaIpcompInSourceIdType | 1.3.6.1.4.1.4355.3.1.1.3.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaIpcompInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. | ||||
| CrsIpsecSaIpcompInProtocol | 1.3.6.1.4.1.4355.3.1.1.3.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaIpcompInDestPort | 1.3.6.1.4.1.4355.3.1.1.3.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaIpcompInSourcePort | 1.3.6.1.4.1.4355.3.1.1.3.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaIpcompInCreator | 1.3.6.1.4.1.4355.3.1.1.3.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaIpcompInEncapsulation | 1.3.6.1.4.1.4355.3.1.1.3.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaIpcompInDecompAlg | 1.3.6.1.4.1.4355.3.1.1.3.1.12 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current A unique value representing the decompression algorithm applied to traffic. | ||||
| CrsIpsecSaIpcompInSeconds | 1.3.6.1.4.1.4355.3.1.1.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds that the SA has existed.
| ||||
| CrsIpsecSaIpcompInUserOctets | 1.3.6.1.4.1.4355.3.1.1.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA.
| ||||
| CrsIpsecSaIpcompInPackets | 1.3.6.1.4.1.4355.3.1.1.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CrsIpsecSaIpcompInDecompErrors | 1.3.6.1.4.1.4355.3.1.1.3.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to decompression errors. | ||||
| CrsIpsecSaIpcompInOtherReceiveErrors | 1.3.6.1.4.1.4355.3.1.1.3.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to errors other than decompression errors. This may include packets dropped due to a lack of receive buffers, and packets dropped due to congestion at the decompression element. | ||||
| TrsIpsecSaEspOutTable | 1.3.6.1.4.1.4355.3.1.1.4 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec Outbound ESP SAs. There should be one row for every outbound ESP security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaEspOutEntry | 1.3.6.1.4.1.4355.3.1.1.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec Outbound ESP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaEspOutAddress | 1.3.6.1.4.1.4355.3.1.1.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaEspOutSpi | 1.3.6.1.4.1.4355.3.1.1.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CrsIpsecSaEspOutSourceId | 1.3.6.1.4.1.4355.3.1.1.4.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaEspOutSourceIdType | 1.3.6.1.4.1.4355.3.1.1.4.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaEspOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaEspOutDestId | 1.3.6.1.4.1.4355.3.1.1.4.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaEspOutDestIdType | 1.3.6.1.4.1.4355.3.1.1.4.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaEspOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaEspOutProtocol | 1.3.6.1.4.1.4355.3.1.1.4.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaEspOutSourcePort | 1.3.6.1.4.1.4355.3.1.1.4.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaEspOutDestPort | 1.3.6.1.4.1.4355.3.1.1.4.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaEspOutCreator | 1.3.6.1.4.1.4355.3.1.1.4.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaEspOutEncapsulation | 1.3.6.1.4.1.4355.3.1.1.4.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaEspOutEncAlg | 1.3.6.1.4.1.4355.3.1.1.4.1.12 | IpsecDoiEspTransform | RO | |
column · IpsecDoiEspTransform · read-only · current A unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used. | ||||
| CrsIpsecSaEspOutEncKeyLength | 1.3.6.1.4.1.4355.3.1.1.4.1.13 | Integer32 (0..65531) | RO | |
column · Integer32 (0..65531) · read-only · current The length of the encryption key in bits used for the algorithm specified in the 'rsIpsecSaEspOutEncAlg' object, or 0 if the key length is implicit in the specified algorithm or there is no encryption specified.
| ||||
| CrsIpsecSaEspOutAuthAlg | 1.3.6.1.4.1.4355.3.1.1.4.1.14 | IpsecDoiAuthAlgorithm | RO | |
column · IpsecDoiAuthAlgorithm · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CrsIpsecSaEspOutLimitSeconds | 1.3.6.1.4.1.4355.3.1.1.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CrsIpsecSaEspOutLimitKbytes | 1.3.6.1.4.1.4355.3.1.1.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CrsIpsecSaEspOutAccSeconds | 1.3.6.1.4.1.4355.3.1.1.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CrsIpsecSaEspOutAccKbytes | 1.3.6.1.4.1.4355.3.1.1.4.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CrsIpsecSaEspOutUserOctets | 1.3.6.1.4.1.4355.3.1.1.4.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CrsIpsecSaEspOutPackets | 1.3.6.1.4.1.4355.3.1.1.4.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CrsIpsecSaEspOutSendErrors | 1.3.6.1.4.1.4355.3.1.1.4.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to any error. This may include errors due to a lack of transmit buffers. | ||||
| TrsIpsecSaAhOutTable | 1.3.6.1.4.1.4355.3.1.1.5 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec Outbound AH SAs. There should be one row for every outbound AH security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaAhOutEntry | 1.3.6.1.4.1.4355.3.1.1.5.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec Outbound AH SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaAhOutAddress | 1.3.6.1.4.1.4355.3.1.1.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaAhOutSpi | 1.3.6.1.4.1.4355.3.1.1.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CrsIpsecSaAhOutSourceId | 1.3.6.1.4.1.4355.3.1.1.5.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaAhOutSourceIdType | 1.3.6.1.4.1.4355.3.1.1.5.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaAhOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaAhOutDestId | 1.3.6.1.4.1.4355.3.1.1.5.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaAhOutDestIdType | 1.3.6.1.4.1.4355.3.1.1.5.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaAhOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CrsIpsecSaAhOutProtocol | 1.3.6.1.4.1.4355.3.1.1.5.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaAhOutSourcePort | 1.3.6.1.4.1.4355.3.1.1.5.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaAhOutDestPort | 1.3.6.1.4.1.4355.3.1.1.5.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaAhOutCreator | 1.3.6.1.4.1.4355.3.1.1.5.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaAhOutEncapsulation | 1.3.6.1.4.1.4355.3.1.1.5.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaAhOutAuthAlg | 1.3.6.1.4.1.4355.3.1.1.5.1.12 | IpsecDoiAhTransform | RO | |
column · IpsecDoiAhTransform · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CrsIpsecSaAhOutLimitSeconds | 1.3.6.1.4.1.4355.3.1.1.5.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CrsIpsecSaAhOutLimitKbytes | 1.3.6.1.4.1.4355.3.1.1.5.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CrsIpsecSaAhOutAccSeconds | 1.3.6.1.4.1.4355.3.1.1.5.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CrsIpsecSaAhOutAccKbytes | 1.3.6.1.4.1.4355.3.1.1.5.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CrsIpsecSaAhOutUserOctets | 1.3.6.1.4.1.4355.3.1.1.5.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CrsIpsecSaAhOutPackets | 1.3.6.1.4.1.4355.3.1.1.5.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CrsIpsecSaAhOutSendErrors | 1.3.6.1.4.1.4355.3.1.1.5.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to any error. This may include errors due to a lack of transmit buffers. | ||||
| TrsIpsecSaIpcompOutTable | 1.3.6.1.4.1.4355.3.1.1.6 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec Outbound IPCOMP SAs. There should be one row for every outbound IPCOMP (security) association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RrsIpsecSaIpcompOutEntry | 1.3.6.1.4.1.4355.3.1.1.6.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec Outbound IPCOMP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CrsIpsecSaIpcompOutAddress | 1.3.6.1.4.1.4355.3.1.1.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. If the IPCOMP SA is shared across multiple SAs in protection suites, this value may be 0. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CrsIpsecSaIpcompOutCpi | 1.3.6.1.4.1.4355.3.1.1.6.1.2 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current The CPI of the SA. Since the lower values of CPIs are reserved to be the same as the algorithm, the syntax for this object is the same as the transform. | ||||
| CrsIpsecSaIpcompOutSourceId | 1.3.6.1.4.1.4355.3.1.1.6.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. This value, if non-zero, is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaIpcompOutSourceIdType | 1.3.6.1.4.1.4355.3.1.1.6.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaIpcompOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. | ||||
| CrsIpsecSaIpcompOutDestId | 1.3.6.1.4.1.4355.3.1.1.6.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. This value, if non-zero, is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CrsIpsecSaIpcompOutDestIdType | 1.3.6.1.4.1.4355.3.1.1.6.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'rsIpsecSaIpcompOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation, or 0 if this SA is used with multiple SAs in protection suites. | ||||
| CrsIpsecSaIpcompOutProtocol | 1.3.6.1.4.1.4355.3.1.1.6.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CrsIpsecSaIpcompOutSourcePort | 1.3.6.1.4.1.4355.3.1.1.6.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaIpcompOutDestPort | 1.3.6.1.4.1.4355.3.1.1.6.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CrsIpsecSaIpcompOutCreator | 1.3.6.1.4.1.4355.3.1.1.6.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CrsIpsecSaIpcompOutEncapsulation | 1.3.6.1.4.1.4355.3.1.1.6.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CrsIpsecSaIpcompOutCompAlg | 1.3.6.1.4.1.4355.3.1.1.6.1.12 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current A unique value representing the compression algorithm applied to traffic. | ||||
| CrsIpsecSaIpcompOutSeconds | 1.3.6.1.4.1.4355.3.1.1.6.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds that the SA has existed.
| ||||
| CrsIpsecSaIpcompOutUserOctets | 1.3.6.1.4.1.4355.3.1.1.6.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CrsIpsecSaIpcompOutPackets | 1.3.6.1.4.1.4355.3.1.1.6.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| NrsSaStatistics | 1.3.6.1.4.1.4355.3.1.2 | |||
node · current This is the base object identifier for all objects which are global counters for IPSec security associations. | ||||
| SrsIpsecEspCurrentInboundSAs | 1.3.6.1.4.1.4355.3.1.2.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of inbound ESP SAs in the entity. | ||||
| SrsIpsecEspTotalInboundSAs | 1.3.6.1.4.1.4355.3.1.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of inbound ESP SAs created in the entity since boot time. | ||||
| SrsIpsecEspCurrentOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of outbound ESP SAs in the entity. | ||||
| SrsIpsecEspTotalOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of outbound ESP SAs created in the entity since boot time. | ||||
| SrsIpsecAhCurrentInboundSAs | 1.3.6.1.4.1.4355.3.1.2.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of inbound AH SAs in the entity. | ||||
| SrsIpsecAhTotalInboundSAs | 1.3.6.1.4.1.4355.3.1.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of inbound AH SAs created in the entity since boot time. | ||||
| SrsIpsecAhCurrentOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of outbound AH SAs in the entity. | ||||
| SrsIpsecAhTotalOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of outbound AH SAs created in the entity since boot time. | ||||
| SrsIpsecIpcompCurrentInboundSAs | 1.3.6.1.4.1.4355.3.1.2.9 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of inbound IPCOMP SAs in the entity. | ||||
| SrsIpsecIpcompTotalInboundSAs | 1.3.6.1.4.1.4355.3.1.2.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of inbound IPCOMP SAs created in the entity since boot time. | ||||
| SrsIpsecIpcompCurrentOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of outbound IPCOMP SAs in the entity. | ||||
| SrsIpsecIpcompTotalOutboundSAs | 1.3.6.1.4.1.4355.3.1.2.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of outbound IPCOMP SAs created in the entity since boot time. | ||||
| NrsSaErrors | 1.3.6.1.4.1.4355.3.1.3 | |||
node · current This is the base object identifier for all objects which are global error counters for IPSec security associations. | ||||
| SrsIpsecDecryptionErrors | 1.3.6.1.4.1.4355.3.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity in SAs since boot time with decryption errors. | ||||
| SrsIpsecAuthenticationErrors | 1.3.6.1.4.1.4355.3.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity in SAs since boot time with authentication errors. This includes all packets in which the hash value is determined to be invalid, for both ESP and AH SAs. | ||||
| SrsIpsecReplayErrors | 1.3.6.1.4.1.4355.3.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity in SAs since boot time with replay errors. | ||||
| SrsIpsecPolicyErrors | 1.3.6.1.4.1.4355.3.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity in SAs since boot time and discarded due to policy errors. This includes packets that had selectors that were invalid for the SA that carried them. | ||||
| SrsIpsecOtherReceiveErrors | 1.3.6.1.4.1.4355.3.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity in SAs since boot time and discarded due to errors not due to decryption, authentication, replay or policy. | ||||
| SrsIpsecSendErrors | 1.3.6.1.4.1.4355.3.1.3.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets to be sent by the entity in SAs since boot time and discarded due to errors. | ||||
| SrsIpsecUnknownSpiErrors | 1.3.6.1.4.1.4355.3.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of packets received by the entity since boot time with SPIs or CPIs that were not valid. | ||||
| NrsSaTraps | 1.3.6.1.4.1.4355.3.1.4 | |||
node · current This is the base object identifier for all objects which are traps for IPSec security associations. | ||||
| !rsEspAuthFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.1 | |||
notification · current IPSec packets with invalid hashes were found in an inbound ESP SA. The total number of authentication errors accumulated is sent for the specific row of the 'rsIpsecSaEspInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsAhAuthFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.2 | |||
notification · current IPSec packets with invalid hashes were found in an inbound AH SA. The total number of authentication errors accumulated is sent for the specific row of the 'rsIpsecSaAhInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsEspReplayFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.3 | |||
notification · current IPSec packets with invalid sequence numbers were found in an inbound ESP SA. The total number of replay errors accumulated is sent for the specific row of the 'rsIpsecSaEspInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsAhReplayFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.4 | |||
notification · current IPSec packets with invalid sequence numbers were found in the specified AH SA. The total number of replay errors accumulated is sent for the specific row of the 'rsIpsecSaAhInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsEspPolicyFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.5 | |||
notification · current IPSec packets carrying packets with invalid selectors for the specified ESP SA were found. The total number of policy errors accumulated is sent for the specific row of the 'rsIpsecSaEspInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsAhPolicyFailureTrap | 1.3.6.1.4.1.4355.3.1.4.0.6 | |||
notification · current IPSec packets carrying packets with invalid selectors for the specified AH SA were found. The total number of policy errors accumulated is sent for the specific row of the 'rsIpsecSaAhInTable' table for the SA; this provides the identity of the SA in which the error occurred. Implementations SHOULD send one trap per SA (within a reasonable time period), rather than sending one trap per packet.
| ||||
| !rsInvalidSpiTrap | 1.3.6.1.4.1.4355.3.1.4.0.7 | |||
notification · current A packet with an unknown SPI was detected from the specified peer with the specified SPI using the specified protocol. The destination address of the received packet is specified by 'ipsecLocalAddress'. The value 'ifIndex' may be 0 if this optional linkage is unsupported. If the object 'ipsecSecurityProtocol' has the value for IPCOMP, then the 'ipsecSPI' object is the CPI of the packet. Implementations SHOULD send one trap per peer (within a reasonable time period), rather than sending one trap per packet. | ||||
| NrsSaTrapObjects | 1.3.6.1.4.1.4355.3.1.5 | |||
node · current This is the base object identifier for objects which are used as part of traps. | ||||
| SrsIpsecSecurityProtocol | 1.3.6.1.4.1.4355.3.1.5.1 | IpsecDoiSecProtocolId | RO | |
scalar · IpsecDoiSecProtocolId · read-only · current A security protocol associated with the trap. | ||||
| SrsIpsecSPI | 1.3.6.1.4.1.4355.3.1.5.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current An SPI associated with a trap. Where the security protocol associated with the trap is IPCOMP, this value has a maximum of 65535. | ||||
| SrsIpsecLocalAddress | 1.3.6.1.4.1.4355.3.1.5.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current A local IP address associated with the trap. | ||||
| SrsIpsecPeerAddress | 1.3.6.1.4.1.4355.3.1.5.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current A peer IP address associated with the trap. | ||||
| NrsSaTrapControl | 1.3.6.1.4.1.4355.3.1.6 | |||
node · current This is the base object identifier for all objects which are trap controls for IPSec security associations. | ||||
| SrsEspAuthFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether espAuthFailureTrap traps should be generated. | ||||
| SrsAhAuthFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether ahAuthFailureTrap traps should be generated. | ||||
| SrsEspReplayFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether espReplayFailureTrap traps should be generated. | ||||
| SrsAhReplayFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether ahReplayFailureTrap traps should be generated. | ||||
| SrsEspPolicyFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether espPolicyFailureTrap traps should be generated. | ||||
| SrsAhPolicyFailureTrapEnable | 1.3.6.1.4.1.4355.3.1.6.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether ahPolicyFailureTrap traps should be generated. | ||||
| SrsInvalidSpiTrapEnable | 1.3.6.1.4.1.4355.3.1.6.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether invalidSpiTrap traps should be generated. | ||||
| NrsSaGroups | 1.3.6.1.4.1.4355.3.1.7 | |||
node · current This is the base object identifier for all objects which describe the groups in this MIB. | ||||
| NrsSaConformance | 1.3.6.1.4.1.4355.3.1.8 | |||
node · current This is the base object identifier for all objects which describe the conformance for this MIB. | ||||
Textual conventions
IpsecIpv6AddressOCTET STRING (SIZE (16))Display hint:
2x:2x:2x:2x:2x:2x:1d.1d.1d.1dThis data type is used to model IPv6 address prefixes. This is a binary string of 16 octets in network byte-order.
IpsecSaCreatorIdentINTEGERDisplay hint:
dike(2)other(3)static(1)unknown(0)A value indicating how an SA was created.
Traps / Notifications
- rsAhAuthFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.2 - rsAhPolicyFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.6 - rsAhReplayFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.4 - rsEspAuthFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.1 - rsEspPolicyFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.5 - rsEspReplayFailureTrap
1.3.6.1.4.1.4355.3.1.4.0.3 - rsInvalidSpiTrap
1.3.6.1.4.1.4355.3.1.4.0.7