TSDIM-SUPPORT-MIB
Nokia (formerly 'Alcatel-Lucent')TSD-IM Support MIB
snmptranslate -m TSDIM-SUPPORT-MIB -Tpsnmpwalk -v2c -c <community> -m TSDIM-SUPPORT-MIB <host> 1.3.6.1.4.1.637.54.1.1.3Imports
| OPTICSIM-COMMON-TC | OpticImFileTrasferProtocolList, OpticsIMSwdlStatusIndicator |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, InstancePointer, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TSDIM-BASICREG-MIB | tsdimBasicMC, tsdimBasicMib |
| TSDIM-SNMP-TC | GenEventLogObj, OpticsIMUserLabel, TsdimAPTAlmSeverity, TsdimAdministrativeState, TsdimAlmProbableCause, TsdimAlmSeverity, TsdimAlmSpecProblem, TsdimEventTimeInt, TsdimNotificationId, TsdimObjectClassId, TsdimObjectInstanceId, TsdimOperationalState, TsdimUdpPort |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItsdimSupportMib | 1.3.6.1.4.1.637.54.1.1.3 | |||
identity TSD-IM Support MIB | ||||
| NtsdimSupportMibObject | 1.3.6.1.4.1.637.54.1.1.3.1 | |||
| StsdimMaxNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.1 | TsdimNotificationId | RO | |
scalar · TsdimNotificationId · read-only · current This is the maximum value of the notification identifier counter generated by SNMP NE. The next notification identifier value, after this maximum value will be equal to one because the counter has wrapped. | ||||
| TtsdimAPTTable | 1.3.6.1.4.1.637.54.1.1.3.1.2 | NA | ||
table · not-accessible · current This table defines the TSDIM APT table. This table is used by Agent in order to store the active alarms, managing system can only read them. | ||||
| RtsdimAPTEntry | 1.3.6.1.4.1.637.54.1.1.3.1.2.1 | NA | ||
row · not-accessible · current Information about a single alarm in the APT. Entries in this table are created by SNMP NE and will be automatically deleted by SNMP NE when it is genereted a cleared-alarm. | ||||
| CtsdimAPTAlarmProbableCause | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.1 | TsdimAlmProbableCause | RO | |
column · TsdimAlmProbableCause · read-only · current See textual conventions. | ||||
| CtsdimAPTAlarmObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.2 | TsdimObjectClassId | RO | |
column · TsdimObjectClassId · read-only · current See textual conventions. | ||||
| CtsdimAPTAlarmObjectInstanceIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.3 | TsdimObjectInstanceId | RO | |
column · TsdimObjectInstanceId · read-only · current See textual conventions. | ||||
| CtsdimAPTAlarmNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.4 | TsdimNotificationId | NA | |
column · TsdimNotificationId · not-accessible · current See textual conventions. | ||||
| CtsdimAPTAlarmSeverity | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.6 | TsdimAPTAlmSeverity | RO | |
column · TsdimAPTAlmSeverity · read-only · current See textual conventions. | ||||
| CtsdimAPTAlarmSpecificProb | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.7 | TsdimAlmSpecProblem | RO | |
column · TsdimAlmSpecProblem · read-only · current See textual conventions. This object is only present if it was included in the alarm trap corresponding to this APT entry. | ||||
| CtsdimAPTAlarmTimeIndex | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.11 | TsdimEventTimeInt | NA | |
column · TsdimEventTimeInt · not-accessible · current See textual conventions. | ||||
| CopticsIMAPTAdditionalText | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.12 | DisplayString | RO | |
| CopticsIMAPTAlarmType | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.13 | DisplayString | RO | |
| CtsdimAPTAlarmTime | 1.3.6.1.4.1.637.54.1.1.3.1.2.1.14 | DateAndTime | RO | |
column · DateAndTime · read-only · current This optional object indicates when the alarm has been generated. | ||||
| TtsdimLogTable | 1.3.6.1.4.1.637.54.1.1.3.1.3 | NA | ||
table · not-accessible · current This table defines the characteristics of the logs, both alarms and events, currently maintained by the agent. It is a common table that describes the behavior of the two logs, in-fact it contains generic attributes not related to the type of records stored inside logs. | ||||
| RtsdimLogEntry | 1.3.6.1.4.1.637.54.1.1.3.1.3.1 | NA | ||
row · not-accessible · current Information about the characteristics of a single log.
| ||||
| CtsdimLogIndex | 1.3.6.1.4.1.637.54.1.1.3.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Indicates the index of the log. | ||||
| CtsdimLogObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.3.1.2 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current This object defines the SNMP entry table object identity of the log of which this row is referred to. | ||||
| CtsdimLogAdminStatus | 1.3.6.1.4.1.637.54.1.1.3.1.3.1.3 | TsdimAdministrativeState | RW | |
column · TsdimAdministrativeState · read-write · current See textual conventions. | ||||
| CtsdimLogOperStatus | 1.3.6.1.4.1.637.54.1.1.3.1.3.1.4 | TsdimOperationalState | RO | |
column · TsdimOperationalState · read-only · current See textual conventions. | ||||
| CtsdimLogMaxSize | 1.3.6.1.4.1.637.54.1.1.3.1.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the maximum size of the log. This value specifies the maximum number of records that can be stored inside the log | ||||
| TtsdimEventLogTable | 1.3.6.1.4.1.637.54.1.1.3.1.4 | NA | ||
table · not-accessible · current This table contain information about single event notification not alarm. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one. | ||||
| RtsdimEventLogEntry | 1.3.6.1.4.1.637.54.1.1.3.1.4.1 | NA | ||
row · not-accessible · current An entry in the tsdimEventLogTable | ||||
| CtsdimEventLogEventType | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object describes the type of the event logged.
| ||||
| CtsdimEventLogObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.2 | TsdimObjectClassId | RO | |
column · TsdimObjectClassId · read-only · current See textual conventions. | ||||
| CtsdimEventLogObjectInstanceIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.3 | TsdimObjectInstanceId | RO | |
column · TsdimObjectInstanceId · read-only · current See textual conventions. | ||||
| CtsdimEventLogNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.4 | TsdimNotificationId | NA | |
column · TsdimNotificationId · not-accessible · current See textual conventions. | ||||
| CtsdimEventLogEventTimeIndex | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.6 | TsdimEventTimeInt | NA | |
column · TsdimEventTimeInt · not-accessible · current See textual conventions. | ||||
| CopticsIMEventLogAdditionalText | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.7 | DisplayString | RO | |
| CtsdimEventLogTime | 1.3.6.1.4.1.637.54.1.1.3.1.4.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current This optional object indicates when the event has been generated. | ||||
| TtsdimAlarmLogTable | 1.3.6.1.4.1.637.54.1.1.3.1.5 | NA | ||
table · not-accessible · current This table defines the TSDIM Alarm Log table. It is used to store the alarms generated by SNMP NE. | ||||
| RtsdimAlarmLogEntry | 1.3.6.1.4.1.637.54.1.1.3.1.5.1 | NA | ||
row · not-accessible · current Each entry contains information about single alarm notification. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one. | ||||
| CtsdimAlarmLogProbableCause | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.1 | TsdimAlmProbableCause | RO | |
column · TsdimAlmProbableCause · read-only · current See textual conventions. | ||||
| CtsdimAlarmLogObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.2 | TsdimObjectClassId | RO | |
column · TsdimObjectClassId · read-only · current See textual conventions. | ||||
| CtsdimAlarmLogObjectInstanceIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.3 | TsdimObjectInstanceId | RO | |
column · TsdimObjectInstanceId · read-only · current See textual conventions. | ||||
| CtsdimAlarmLogNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.4 | TsdimNotificationId | NA | |
column · TsdimNotificationId · not-accessible · current See textual conventions. | ||||
| CtsdimAlarmLogSeverity | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.6 | TsdimAlmSeverity | RO | |
column · TsdimAlmSeverity · read-only · current The perceived severity of the alarm, as specified by the agent that generated it. | ||||
| CtsdimAlarmLogSpecificProb | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.7 | TsdimAlmSpecProblem | RO | |
column · TsdimAlmSpecProblem · read-only · current See textual conventions. This object is only present if it was included in the alarm trap corresponding to this AlarmLog entry. | ||||
| CtsdimAlarmLogTimeIndex | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.11 | TsdimEventTimeInt | NA | |
column · TsdimEventTimeInt · not-accessible · current See textual conventions. | ||||
| CopticsIMAlarmLogAdditionalText | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.12 | DisplayString | RO | |
| CopticsIMAlarmLogAlarmType | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.13 | DisplayString | RO | |
| CtsdimAlarmLogTime | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.14 | DateAndTime | RO | |
column · DateAndTime · read-only · current This optional object indicates when the alarm has been generated. | ||||
| CopticsIMAlarmLogOperatorText | 1.3.6.1.4.1.637.54.1.1.3.1.5.1.15 | DisplayString | RW | |
column · DisplayString · read-write · current This object allows for operator to insert a text associated to this alarm. | ||||
| NtsdimEFDAllTraps | 1.3.6.1.4.1.637.54.1.1.3.1.6 | |||
node · current This value is used as wildcard value inside tsdimEFDTrapId. | ||||
| NtsdimEFDAllObjects | 1.3.6.1.4.1.637.54.1.1.3.1.7 | |||
node · current This value is used as wildcard value inside tsdimEFDTrapObject. | ||||
| TtsdimEFDTable | 1.3.6.1.4.1.637.54.1.1.3.1.8 | NA | ||
table · not-accessible · current This table specifies which traps will be sent to which management system. This EFD object is locked, via administrative state, by Agent when the first manager polling timeout expires and it is deleted when the second timeout expires. | ||||
| RtsdimEFDEntry | 1.3.6.1.4.1.637.54.1.1.3.1.8.1 | NA | ||
row · not-accessible · current Information about a group of traps to be sent to a particular IP address. A new entry must have values for all attributes that do not have default values before its RowStatus column can be set to active(1).
| ||||
| CtsdimEFDIndex | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current A unique number identifying the table entry. Each manager has its own index associated to it. | ||||
| CtsdimEFDDest | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address to which traps identified by this table entry should be sent. | ||||
| CtsdimEFDTrapId | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.3 | OBJECT IDENTIFIER | RC | |
column · OBJECT IDENTIFIER · read-create · current The ID of the trap type to which this entry applies. It can be set to tsdimEFDAllTraps OID in order to identify all traps. | ||||
| CtsdimEFDTrapObject | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.4 | OBJECT IDENTIFIER | RC | |
column · OBJECT IDENTIFIER · read-create · current The object class to which this entry applies. The special value tsdimEFDAllObjects indicates that traps of the type specified in tsdimEFDTrapId object can be generated by all object instances. | ||||
| CtsdimEFDPort | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.5 | TsdimUdpPort | RC | |
column · TsdimUdpPort · read-create · current The UDP port on the specified management system to which traps identified by this entry should be sent. | ||||
| CtsdimEFDLowestForwardedSeverity | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.6 | TsdimAlmSeverity | RC | |
column · TsdimAlmSeverity · read-create · current The lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type specified has a severity associated with it. | ||||
| CtsdimEFDIndeterminate | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current When this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified destination. This object has significance only if the trap type specified has a severity associated with it. | ||||
| CtsdimEFDOperStatus | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.9 | TsdimOperationalState | RO | |
column · TsdimOperationalState · read-only · current See textual conventions. | ||||
| CtsdimEFDRowStatus | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or to delete an existing row in the table. | ||||
| CtsdimEFDManagerIndex | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current A unique number identifying the manager description inside the opticsIMMgrPollingInfoTable. It will have the same value as the opticsIMMgrPollingInfoTable index columnar object. | ||||
| CtsdimEFDIPv6Dest | 1.3.6.1.4.1.637.54.1.1.3.1.8.1.12 | InetAddressIPv6 | RC | |
column · InetAddressIPv6 · read-create · current The IP address in the IPv6 format to which traps identified by this table entry should be sent. | ||||
| StsdimEventObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.9 | TsdimObjectClassId | AN | |
scalar · TsdimObjectClassId · accessible-for-notify · current See textual conventions. | ||||
| StsdimEventObjectInstanceIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.10 | TsdimObjectInstanceId | AN | |
scalar · TsdimObjectInstanceId · accessible-for-notify · current See textual conventions. | ||||
| StsdimEventNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.11 | TsdimNotificationId | AN | |
scalar · TsdimNotificationId · accessible-for-notify · current See textual conventions. | ||||
| StsdimEventTime | 1.3.6.1.4.1.637.54.1.1.3.1.12 | TsdimEventTimeInt | AN | |
scalar · TsdimEventTimeInt · accessible-for-notify · current See textual conventions. | ||||
| StsdimAlarmSeverity | 1.3.6.1.4.1.637.54.1.1.3.1.13 | TsdimAlmSeverity | AN | |
scalar · TsdimAlmSeverity · accessible-for-notify · current See textual conventions. | ||||
| StsdimAlarmSpecProblem | 1.3.6.1.4.1.637.54.1.1.3.1.14 | TsdimAlmSpecProblem | AN | |
scalar · TsdimAlmSpecProblem · accessible-for-notify · current See textual conventions. | ||||
| !tsdimObjectCreationNotification | 1.3.6.1.4.1.637.54.1.1.3.1.18 | |||
notification · current Indicates a generic Object Creation Event | ||||
| !tsdimObjectDeletionNotification | 1.3.6.1.4.1.637.54.1.1.3.1.19 | |||
notification · current Indicates a generic Object Deletion Event | ||||
| !tsdimAVCNotification | 1.3.6.1.4.1.637.54.1.1.3.1.20 | |||
notification · current Indicates a generic Attribute Value Change Event | ||||
| !tsdimStateChangeNotification | 1.3.6.1.4.1.637.54.1.1.3.1.21 | |||
notification · current Indicates a generic State Change Event | ||||
| !tsdimAlertNotification | 1.3.6.1.4.1.637.54.1.1.3.1.22 | |||
notification · current Indicates an alert notification used by Agent to highlight to the managing systems the creation of new events. The Agent itself (as sysORTable) emits this notification. | ||||
| StsdimAlertNotifTimeOut | 1.3.6.1.4.1.637.54.1.1.3.1.23 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is the alert notification time-out value. It is used by SNMP Agent in order to send the alert notification trap each time this time-out expire
| ||||
| StsdimAlertNotifFreqCount | 1.3.6.1.4.1.637.54.1.1.3.1.24 | Integer32 | RW | |
scalar · Integer32 · read-write · current This is the alert notification frequency counter value, where frequency is the number of events the SNMP Agent will generate before the creation of an alert notification trap. | ||||
| StsdimAlarmSevDefault | 1.3.6.1.4.1.637.54.1.1.3.1.26 | TsdimAlmSeverity | RW | |
scalar · TsdimAlmSeverity · read-write · current The default severity value used for new profile index/trap ID pairs that have not yet been modified. This value is also used whenever an object's alarm severity profile index is set to 0. The default value of this object is indeterminate(5). | ||||
| StsdimAlarmSevProfileIndexNext | 1.3.6.1.4.1.637.54.1.1.3.1.27 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object contains an appropriate value to be used for tsdimAlarmSevProfileIndex when creating entries in the tsdimAlarmSevProfileTable. The value -1 indicates that no unassigned entries are available. To obtain the index value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index (or -1). | ||||
| TtsdimAlarmSevProfileTable | 1.3.6.1.4.1.637.54.1.1.3.1.28 | NA | ||
table · not-accessible · current This table specifies which profiles exist. Deleting an entry in this table automatically deletes the corresponding entries in the tsdimAlarmSeverityTable. | ||||
| RtsdimAlarmSevProfileEntry | 1.3.6.1.4.1.637.54.1.1.3.1.28.1 | NA | ||
row · not-accessible · current A group of severities, one for each alarm type in the communications alarm group. | ||||
| CtsdimAlarmSevProfileIndex | 1.3.6.1.4.1.637.54.1.1.3.1.28.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current A number identifying this alarm severity profile. | ||||
| CtsdimAlarmSevProfileRowStatus | 1.3.6.1.4.1.637.54.1.1.3.1.28.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or to delete an existing row in the table. | ||||
| CtsdimAlarmSevProfileUserLabel | 1.3.6.1.4.1.637.54.1.1.3.1.28.1.3 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current See Textual Convention. | ||||
| TtsdimAlarmSevTable | 1.3.6.1.4.1.637.54.1.1.3.1.29 | NA | ||
table · not-accessible · current This table associates profile index and trap ID pairs with severities to be used for alarm traps that have occurred. (Note that this table does not apply to cleared alarms.) | ||||
| RtsdimAlarmSevEntry | 1.3.6.1.4.1.637.54.1.1.3.1.29.1 | NA | ||
row · not-accessible · current An entry in this table associates an alarm severity profile index/trap ID pair with a severity. Deleting a particular profile's row in the alarm severity profile table deletes all rows in this table with the same profile index. | ||||
| CtsdimAlarmSevTrapId | 1.3.6.1.4.1.637.54.1.1.3.1.29.1.1 | OBJECT IDENTIFIER | NA | |
column · OBJECT IDENTIFIER · not-accessible · current The ID of the trap type to which this entry applies. | ||||
| CtsdimAlarmSevSeverity | 1.3.6.1.4.1.637.54.1.1.3.1.29.1.2 | TsdimAlmSeverity | RC | |
column · TsdimAlmSeverity · read-create · current The severity to be used for this trap type when the TrapId is selected. When the agent supports the evaluation of alarm service dependency (not service affecting/service affecting), this object provides the alarm severity when it is evaluated service affecting. Otherwise this object provides the generic severity. If no value for this object has ever been set since the corresponding profile was created, the agent should return the value of the object tsdimAlarmSevDefault. | ||||
| CtsdimAlarmSevRowStatus | 1.3.6.1.4.1.637.54.1.1.3.1.29.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or to delete an existing row in the table. | ||||
| CtsdimAlarmSevSeverityNotServAff | 1.3.6.1.4.1.637.54.1.1.3.1.29.1.4 | TsdimAlmSeverity | RC | |
column · TsdimAlmSeverity · read-create · current The severity to be used for this trap type when the TrapId is selected and the agent evaluates the alarm not Service Affecting. If no value for this object has ever been set since the corresponding profile was created, the agent should return the value of the object tsdimAlarmSevDefault. | ||||
| CtsdimAlarmSevProbableCause | 1.3.6.1.4.1.637.54.1.1.3.1.29.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The readable format of the trap type to which this entry applies | ||||
| SopticsIMBackupFilename | 1.3.6.1.4.1.637.54.1.1.3.1.30 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates name of the backup file. | ||||
| SopticsIMBackupRequestorAddress | 1.3.6.1.4.1.637.54.1.1.3.1.31 | Integer32 | RW | |
scalar · Integer32 · read-write · current This attribute indicates the address of the manager that has requested the operation. I will be used by the agent to provide checks to avoid multi backup operations. It is a unique number identifying the manager description inside the opticsIMMgrPollingInfoTable. It will have the same value as the opticsIMMgrPollingInfoTable index columnar object. | ||||
| SopticsIMRestoreFilename | 1.3.6.1.4.1.637.54.1.1.3.1.32 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates the name of the chosen backup file. | ||||
| SopticsIMRestoreSWVersion | 1.3.6.1.4.1.637.54.1.1.3.1.33 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates the software version of the NE that has generated the file to backup. | ||||
| SopticsIMRestoreState | 1.3.6.1.4.1.637.54.1.1.3.1.34 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute can have one of the following values: - absent(0) -- meaning not present - downloading(1) -- download in progress - present(2) -- download finished, the file is ready to apply - apply(3) -- file applied. These are used to trace the download phase. Other values: - failed (4) -- meaning a generic fail - fileNotPresent (5) -- meaning the file to restore is not present - fileNotCorrect (6) -- meaning the file to restore is not correct
| ||||
| SopticsIMRestoreRequestorAddress | 1.3.6.1.4.1.637.54.1.1.3.1.35 | Integer32 | RW | |
scalar · Integer32 · read-write · current This attribute indicates the address of the manager that has requested the operation. I will be used by the agent to provide checks to avoid multi restore operations. It is a unique number identifying the manager description inside the opticsIMMgrPollingInfoTable. It will have the same value as the opticsIMMgrPollingInfoTable index columnar object. | ||||
| !tsdimRowChangeNotification | 1.3.6.1.4.1.637.54.1.1.3.1.36 | |||
notification · current Indicates a Row Change Event | ||||
| TtsdimGenEventLogTable | 1.3.6.1.4.1.637.54.1.1.3.1.37 | NA | ||
table · not-accessible · current This table contain information about single generic event notification. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one. The objects tsdimGenEventLogObj* form a static array of generic objects. When a Generic Event Notification is sent, all its objects are mapped in an entry of this table. The first five objects, called common objects, of this table have the same name and type of the corresponding Generic Event Notification. The remaining tsdimGenEventLogObj* are particular: they form a static array of generic objects; each of these object represent a specific object of the corresponding Generic Event Notification. Each object of the Generic Event Notification, with the exception of the common ones, is translated to an OCTET STRING form and then copied in the relative tsdimGenEventLogObj* following the Object Identifier order. | ||||
| RtsdimGenEventLogEntry | 1.3.6.1.4.1.637.54.1.1.3.1.37.1 | NA | ||
row · not-accessible · current An entry in the tsdimGenEventLogTable | ||||
| CtsdimGenEventLogEventType | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object describes the type of the generic event logged.
| ||||
| CtsdimGenEventLogObjectClassIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.2 | TsdimObjectClassId | RO | |
column · TsdimObjectClassId · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObjectInstanceIdentifier | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.3 | TsdimObjectInstanceId | RO | |
column · TsdimObjectInstanceId · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogNotificationId | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.4 | TsdimNotificationId | NA | |
column · TsdimNotificationId · not-accessible · current See textual conventions. | ||||
| CtsdimGenEventLogEventTimeIndex | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.5 | TsdimEventTimeInt | NA | |
column · TsdimEventTimeInt · not-accessible · current See textual conventions. | ||||
| CtsdimGenEventLogObj1 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.6 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj2 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.7 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj3 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.8 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj4 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.9 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj5 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.10 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj6 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.11 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj7 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.12 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj8 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.13 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj9 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.14 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| CtsdimGenEventLogObj10 | 1.3.6.1.4.1.637.54.1.1.3.1.37.1.15 | GenEventLogObj | RO | |
column · GenEventLogObj · read-only · current See textual conventions. | ||||
| !opticsIMProtectionSwitchReporting | 1.3.6.1.4.1.637.54.1.1.3.1.38 | |||
notification · current Indicates a generic protection switch event. The object class identifies the type of protection unit. Both the involved object instances are included in the notification. | ||||
| NopticsIMEFDAllEvents | 1.3.6.1.4.1.637.54.1.1.3.1.39 | |||
node · current This value is used as events, not alarms, wildcard value inside tsdimEFDTrapId. | ||||
| TopticsIMSwPackageTable | 1.3.6.1.4.1.637.54.1.1.3.1.40 | NA | ||
table · not-accessible · current This table contains the information on the software packages present in the equipment. | ||||
| RopticsIMSwPackageEntry | 1.3.6.1.4.1.637.54.1.1.3.1.40.1 | NA | ||
row · not-accessible · current An entry of the opticsIMSwPackageTable. Each entry represents a network element software release. It is created, by the managed system during the commissioning phase or as a result of a download operation. | ||||
| CopticsIMSwPackageIndex | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object represents the index of the table. | ||||
| CopticsIMSwPackageCommand | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to activate a stand-by version or to commit an activated one. As consequence of an activation command, the stand-by software package addressed by the command becomes active and, viceversa,the active one becomes a stand-by version or a boot one according to the previous state of the software package (active or comitted, respectively). If the forced activation is required, the stand-by software version is activated also if it is the same as the active one. The manager can read the result of the activation (forced or not) in the SwPackageActivationResult object. The commit command is used to indicate that the active version has to be used as the bootstrap software in case of re-start. This command can be addressed only on an active version. In some NEs the commit command is not supported and the commitment of the activated version takes place implicitely together with the activation itself, so that in case of restart events the version used for rebooting is the active version. When the activation or commit command has been completed, the agent has to change the value back to 'none'.
| ||||
| CopticsIMSwPackageActivationResult | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object represents the result of a software package activation (forced or not).
| ||||
| CopticsIMSwPackageActivationDate | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the date and time of the last activation of the software package.It is provided according to the following format:yyyy/mm/dd hh:mm:ss. If the software package has not been yet activated, the string notYetActivated is used. | ||||
| CopticsIMSwPackageCurrentState | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object represents the current state of the software package.
| ||||
| CopticsIMSwPackageLabel | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the name of the software package. | ||||
| CopticsIMSwPackageVersion | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the version of the software package (i.e. V02.11.00). | ||||
| CopticsIMSwPackageOperationalState | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.8 | TsdimOperationalState | RO | |
column · TsdimOperationalState · read-only · current See textual conventions. It defines if the software package is correctly loaded (enabled) or not (disabled). | ||||
| CopticsIMSwPackageRelease | 1.3.6.1.4.1.637.54.1.1.3.1.40.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the version of the software package (i.e. V02.11.00). | ||||
| TopticsIMSwUnitTable | 1.3.6.1.4.1.637.54.1.1.3.1.41 | NA | ||
table · not-accessible · current This table contains the information on the software units present in the software package. | ||||
| RopticsIMSwUnitEntry | 1.3.6.1.4.1.637.54.1.1.3.1.41.1 | NA | ||
row · not-accessible · current An entry of the opticsIMSwUnitTable. | ||||
| CopticsIMSwUnitIndex | 1.3.6.1.4.1.637.54.1.1.3.1.41.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object represents the index of the software unit table. | ||||
| CopticsIMSwUnitLabel | 1.3.6.1.4.1.637.54.1.1.3.1.41.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the name of the software unit (i.e EC). | ||||
| CopticsIMSwUnitVersion | 1.3.6.1.4.1.637.54.1.1.3.1.41.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the version of the software unit (i.e. V01.03.10). | ||||
| CopticsIMSwUnitSize | 1.3.6.1.4.1.637.54.1.1.3.1.41.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object specifies the size of the software unit in bytes.
| ||||
| SopticsIMswdlStatusIndicator | 1.3.6.1.4.1.637.54.1.1.3.1.42 | OpticsIMSwdlStatusIndicator | RO | |
scalar · OpticsIMSwdlStatusIndicator · read-only · current See textual conventions. | ||||
| TopticsIMSwdlInitTable | 1.3.6.1.4.1.637.54.1.1.3.1.48 | NA | ||
table · not-accessible · current This table contains information about software download Initialization phase. | ||||
| RopticsIMSwdlInitEntry | 1.3.6.1.4.1.637.54.1.1.3.1.48.1 | NA | ||
| CopticsImSwdlInitTableIndex | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object defines the index of the table. | ||||
| CopticsImSwdlInitForcedDownload | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current This flag indicates whether the version indicated by the identifier of the new software release has to be loaded entirely regardless of the fact that some software units may already be present in the NE. | ||||
| CopticsImSwdlInitSwPkgVersion | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current This object contains the version of the new SW Release to be delivered to the managed system. | ||||
| CopticsImSwdlInitSwPkgLabel | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current This object contains the Label of the new SW Release to be delivered to the managed system. | ||||
| CopticsImSwdlInitDescrName | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current This object contains the Name of the Description file to be delivered to the managed system. | ||||
| CopticsIMSwdlInitRowStatus | 1.3.6.1.4.1.637.54.1.1.3.1.48.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create / delete a row. Delete is used to abort Software download Operation. When a new row is created the opticsIMswdlStatusIndicator is changed in Downloading, when the row is deleted the Swdl operation is aborted or finished and the opticsIMswdlStatusIndicator is changed in Idle. | ||||
| SopticsIMNERestartRequest | 1.3.6.1.4.1.637.54.1.1.3.1.54 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to require the execution of the restart procedure on the NE. On the reception of this request, the agent will execute the committed software version, in the same way of a spontaneous restart. When the restart has been completed, the agent has to change the value back to 'idle' and set the restart flag (opticsIMInfoNERestartFlag attribute of the opticsIMInfoPolledTable). Note: the restart(1) value should be used if there is no distinction between cold and warm restart. If there is a distinction, then the correct value i.e. coldRestart(3) or warmRestart(3) should be used, as appropriate. dbTruncate option commands the Agent to 'shrink' the DB and automatically perform a coldRestart.
| ||||
| SopticsIMBackupState | 1.3.6.1.4.1.637.54.1.1.3.1.55 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute is used to trace the backup phase.
| ||||
| TopticsIMEqptSwUnitTable | 1.3.6.1.4.1.637.54.1.1.3.1.56 | NA | ||
table · not-accessible · current This table contains the information on the software units present in the equipment. | ||||
| RopticsIMEqptSwUnitEntry | 1.3.6.1.4.1.637.54.1.1.3.1.56.1 | NA | ||
row · not-accessible · current An entry of the opticsIMEqptSwUnitTable. | ||||
| CopticsIMEqptSwUnitPosition | 1.3.6.1.4.1.637.54.1.1.3.1.56.1.1 | OCTET STRING (SIZE (4)) | NA | |
column · OCTET STRING (SIZE (4)) · not-accessible · current This object represents the index of the equipment software unit table. | ||||
| CopticsIMEqptSwUnitLabel | 1.3.6.1.4.1.637.54.1.1.3.1.56.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the name of the software unit (i.e EC). | ||||
| CopticsIMEqptSwUnitVersion | 1.3.6.1.4.1.637.54.1.1.3.1.56.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current This object specifies the version of the software unit (i.e. V01.03.10). | ||||
| CopticsIMEqptSwUnitSwdlStatus | 1.3.6.1.4.1.637.54.1.1.3.1.56.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object specifies the status of the download of the software unit.
| ||||
| NtsdimEFDAllAlarms | 1.3.6.1.4.1.637.54.1.1.3.1.57 | |||
node · current This value is used as alarms, not generic events, wildcard value inside tsdimEFDTrapObject. | ||||
| SopticsIMAutoDiscoveryStatus | 1.3.6.1.4.1.637.54.1.1.3.1.58 | INTEGER | RO | |
scalar · INTEGER · read-only · current The autoDiscoveryStatus indicates the current status of auto-discovery can be: - idle (default): auto-discovery not enabled. - auto-discovery ongoing: in this status the auto-discovery has been enabled, but no response message has been received from network management. - auto-discovery succeeded: the auto-discovery succeeded. This status represents the receiving of the Acknowledge response from OS - auto-discovery failed: the auto-discovery failed. This status represents the receiving of'Nack' message from OS.
| ||||
| SopticsIMEnableAutodiscovery | 1.3.6.1.4.1.637.54.1.1.3.1.59 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to activate and stop the auto-discovery mechanism in the NE.
It is possible to use the same action with different syntax:
- if activation is selected (enabled): once accepted this action, the NE starts sending the auto-discovery message
to the network management system. The status reported in the autodiscoveryStatus attribute goes to ongoing.
The action is refused if either the local address or the network management address has not been configured.
- if stop is selected (disable): the auto-discovery mechanism is stopped. This option is always accepted and the status
(reported in the autodiscoveryStatus object) comes back to idle.
| ||||
| SopticsimSnmpMainOSIpAddress | 1.3.6.1.4.1.637.54.1.1.3.1.60 | IpAddress | RW | |
scalar · IpAddress · read-write · current This objects defines the IP address of the main OS. The default value is 0.0.0.0 (no IP address configured) | ||||
| SopticsimSnmpMainOSUdpPort | 1.3.6.1.4.1.637.54.1.1.3.1.61 | TsdimUdpPort | RW | |
scalar · TsdimUdpPort · read-write · current This objects defines the UDP port of the main OS. | ||||
| SopticsimSnmpSpareOSIpAddress | 1.3.6.1.4.1.637.54.1.1.3.1.62 | IpAddress | RW | |
scalar · IpAddress · read-write · current This objects defines the IP address of the spare OS. The default value is 0.0.0.0 (no IP address configured) | ||||
| SopticsimSnmpSpareOSUdpPort | 1.3.6.1.4.1.637.54.1.1.3.1.63 | TsdimUdpPort | RW | |
scalar · TsdimUdpPort · read-write · current This objects defines the UDP port of the spare OS. | ||||
| SopticsIMAdditionalText | 1.3.6.1.4.1.637.54.1.1.3.1.64 | DisplayString | RO | |
scalar · DisplayString · read-only · current This optional object indicates when the alarm has been generated. | ||||
| SopticsIMAlarmType | 1.3.6.1.4.1.637.54.1.1.3.1.65 | DisplayString | RO | |
scalar · DisplayString · read-only · current This optional object indicates when the alarm has been generated. | ||||
| NtsdimSupportMibObjBackupServ | 1.3.6.1.4.1.637.54.1.1.3.1.66 | |||
| SopticsImBackupServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.66.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the Backup Server. This information is used by the Backup Client to connect the server. | ||||
| SopticsImBackupServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.66.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the BACKUP Server. This information is used by the BACKUP Client to connect the BACKUP server. | ||||
| SopticsImBackupServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.66.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of BACKUP Server. This information is used by the BACKUP Client to connect the BACKUP server. | ||||
| SopticsImBackupServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.66.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of Backup Server. This information is used by the BACKUP Client to connect the BACKUP server. | ||||
| SopticsImBackupServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.66.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of Backup Server. This information is used by the BACKUP Client to connect the BACKUP server. | ||||
| SopticsImBackupServerIPv6Address | 1.3.6.1.4.1.637.54.1.1.3.1.66.6 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current This object contains the Address in IPv6 format of the Backup Server. This information is used by the Backup Client to connect the server. | ||||
| NtsdimSupportMibObjRestoreServ | 1.3.6.1.4.1.637.54.1.1.3.1.67 | |||
| SopticsImRestoreServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.67.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the RESTORE Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| SopticsImRestoreServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.67.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the RESTORE Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| SopticsImRestoreServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.67.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of RESTORE Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| SopticsImRestoreServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.67.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of Restore Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| SopticsImRestoreServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.67.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of Restore Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| SopticsImRestoreServerIPv6Address | 1.3.6.1.4.1.637.54.1.1.3.1.67.6 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current This object contains the Address in IPv6 format of the RESTORE Server. This information is used by the RESTORE Client to connect the RESTORE server. | ||||
| NtsdimSupportMibObjRestoreOp | 1.3.6.1.4.1.637.54.1.1.3.1.68 | |||
| SopticsIMRestorePercentage | 1.3.6.1.4.1.637.54.1.1.3.1.68.1 | INTEGER (0..100) | RO | |
scalar · INTEGER (0..100) · read-only · current This object contains the percentage of Restore file(s) transferred. This value is used by the managing System to poll RESTORE information. | ||||
| SopticsIMRestoreTotalBytes | 1.3.6.1.4.1.637.54.1.1.3.1.68.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object contains the total number of bytes of Restore file(s) transferred. This value is used by the managing System to poll RESTORE information. | ||||
| SopticsIMRestoreCurrentFile | 1.3.6.1.4.1.637.54.1.1.3.1.68.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current This object contains the name of the File in transfer. This value is used by the managing System to poll RESTORE information. | ||||
| NtsdimSupportMibObjPMCollectionServ | 1.3.6.1.4.1.637.54.1.1.3.1.69 | |||
| SopticsImPMCollectionServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.69.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the PM collection Server. This information is used by the PM collection Client to connect the PM collection server. | ||||
| SopticsImPMCollectionServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.69.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the PM collection Server. This information is used by the PM collection Client to connect the PM collection server. | ||||
| SopticsImPMCollectionServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.69.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of PM collection Server. This information is used by the PM collection Client to connect the PM collection server. | ||||
| SopticsImPMCollectionServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.69.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of PM collection Server.
This information is used by the PM collection Client to connect the
PM collection server. | ||||
| SopticsImPMCollectionServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.69.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of PM collection Server. This information is used by the PM collection Client to connect the PM collection server. | ||||
| NtsdimSupportMibObjMACAddressCollectionServ | 1.3.6.1.4.1.637.54.1.1.3.1.70 | |||
| SopticsImMACAddressCollectionServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.70.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the Server. This information is used by the MAC Address Collection Client to connect the MAC Address Collection server. | ||||
| SopticsImMACAddressCollectionServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.70.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the MAC Address Collection Server. This information is used by the MAC Address Collection Client to connect the MAC Address Collection server. | ||||
| SopticsImMACAddressCollectionServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.70.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of MAC Address Collection Server. This information is used by the MAC Address Collection Client to connect the MAC Address Collection server. | ||||
| SopticsImMACAddressCollectionServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.70.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of MAC Address Collection Server. This information is used by the MAC Address Collection Client to connect the MAC Address Collection server. | ||||
| SopticsImMACAddressCollectionServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.70.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of MAC Address Collection Server. This information is used by the MAC Address Collection Client to connect the MAC Address Collection server. | ||||
| SopticsImFileTrasferProtocolsCapability | 1.3.6.1.4.1.637.54.1.1.3.1.71 | OpticImFileTrasferProtocolList | RO | |
scalar · OpticImFileTrasferProtocolList · read-only · current A value that uniquely identifies the set of supported file transfer protocols. | ||||
| SopticsImFileTrasferProtocolConfigured | 1.3.6.1.4.1.637.54.1.1.3.1.72 | OpticImFileTrasferProtocolList | RW | |
scalar · OpticImFileTrasferProtocolList · read-write · current A value that allows the configuration of the file transfer protocol used by the NE.
It is possible to set to 1 only a single bit of the bit mask (i.e. the NE accepts
the configuration of only one file transfer protocol).
The default value is NE type dependent. | ||||
| NtsdimSupportMibObjUalUploadServ | 1.3.6.1.4.1.637.54.1.1.3.1.73 | |||
| SopticsImUalUploadServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.73.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the UAL Upload Server. This information is used by the UAL Upload Client to connect the server. | ||||
| SopticsImUalUploadServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.73.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the UAL Upload Server. This information is used by the UAL Upload Client to connect the UAL Upload server. | ||||
| SopticsImUalUploadServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.73.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of UAL Upload Server. This information is used by the UAL Upload Client to connect the UAL Upload server. | ||||
| SopticsImUalUploadServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.73.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of UAL Upload Server. This information is used by the UAL Upload Client to connect the server. | ||||
| SopticsImUalUploadServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.73.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of UAL Upload Server. This information is used by the UAL Upload Client to connect the server. | ||||
| SopticsIMUalUploadFilename | 1.3.6.1.4.1.637.54.1.1.3.1.73.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates name of the UAL upload file. | ||||
| SopticsIMUalUploadRequestorAddress | 1.3.6.1.4.1.637.54.1.1.3.1.73.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current This attribute indicates the address of the manager that has requested the operation. I will be used by the agent to provide checks to avoid multi upload operations. It is a unique number identifying the manager description inside the opticsIMMgrPollingInfoTable. It will have the same value as the opticsIMMgrPollingInfoTable index columnar object. | ||||
| SopticsIMUalUploadState | 1.3.6.1.4.1.637.54.1.1.3.1.73.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute is used to trace the upload phase.
| ||||
| SopticsImSecureLogUploadTransferProtocolHostKey | 1.3.6.1.4.1.637.54.1.1.3.1.73.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the host key of the UAL Upload Server. This information is used by the UAL Upload Client to connect the Ftp server in case secureFtp protocol (opticsIMFileTrasferProtocolType = sFtpServer ). The default value is a null string. | ||||
| SopticsImUalUploadServerIpv6Address | 1.3.6.1.4.1.637.54.1.1.3.1.73.10 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current This object contains the Address of the UAL Upload Server in Ipv6 format. This information is used by the UAL Upload Client to connect the server. | ||||
| NtsdimSupportMibObjUalConfiguration | 1.3.6.1.4.1.637.54.1.1.3.1.74 | |||
| SopticsImUalLogFileSize | 1.3.6.1.4.1.637.54.1.1.3.1.74.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object indicates size of UAL log file , in KiloByte blocks. | ||||
| NopticsImUalLogEvent | 1.3.6.1.4.1.637.54.1.1.3.1.74.2 | |||
| SopticsImUalSECULog | 1.3.6.1.4.1.637.54.1.1.3.1.74.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable SECU (security) events log , the default value is enabled .
| ||||
| SopticsImUalCOMMLog | 1.3.6.1.4.1.637.54.1.1.3.1.74.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable COMM (communication & routing) events log , the default value is enabled .
| ||||
| SopticsImUalEQPTLog | 1.3.6.1.4.1.637.54.1.1.3.1.74.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable EQPT (equipment) events log , the default value is enabled .
| ||||
| SopticsImUalDATALog | 1.3.6.1.4.1.637.54.1.1.3.1.74.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable DATA (Ethernet Provision) events log , the default value is enabled .
| ||||
| TopticsIMEFDExtensionTable | 1.3.6.1.4.1.637.54.1.1.3.1.75 | NA | ||
table · not-accessible · current This table associate some extra parameters to the EFDtable to be used to send traps to a particular IP Address. | ||||
| RopticsIMEFDExtensionEntry | 1.3.6.1.4.1.637.54.1.1.3.1.75.1 | NA | ||
row · not-accessible · current Extra information about a group of traps to be sent to a particular IP address, over the information already defined on tsdimEFDtable.
| ||||
| CopticsIMEFDUserName | 1.3.6.1.4.1.637.54.1.1.3.1.75.1.1 | DisplayString | RW | |
column · DisplayString · read-write · current The username for the SNMPv3 traps identified by this table entry should be sent. | ||||
| SopticsImLicenseCode | 1.3.6.1.4.1.637.54.1.1.3.1.100 | OCTET STRING (SIZE (0..1023)) | RW | |
scalar · OCTET STRING (SIZE (0..1023)) · read-write · current This object allows to update by managing system the LicenseString that identifies the features bought by the customer. | ||||
| SopticsImSwLicense | 1.3.6.1.4.1.637.54.1.1.3.1.101 | OCTET STRING (SIZE (0..511)) | RO | |
scalar · OCTET STRING (SIZE (0..511)) · read-only · current This object allows to report in a clear text to the managing system the list of Licenses that identify the features bougth by the customer. | ||||
| SopticsImLedsReset | 1.3.6.1.4.1.637.54.1.1.3.1.105 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to trigger a reset of all the Leds present on equipment. As consequence, all the Leds are cleared and the opticsImAttendedStatus objects is set to 'on' value. When the reset has been completed, the agent has to change the value of opticsImLedsReset object back to notResetting.
| ||||
| SopticsImAttendedStatus | 1.3.6.1.4.1.637.54.1.1.3.1.106 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object specifies the status of the Leds Reset procedure (on or off). When the opticsImLedsReset object is set to 'resetting' value the agent has to set this object (opticsImAttendedStatus ) to 'on' value, clear all the Leds present on equipment, and store the list of raised alarms (that highlighted on Leds to clear). When all the alarms present on stored list are cleared, the agent has to change the value of opticsImAttendedStatus object to 'off' value.
| ||||
| SopticsIMTelnetStatus | 1.3.6.1.4.1.637.54.1.1.3.1.107 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable telnet service, the default value is enabled
| ||||
| SopticsIMSftpStatus | 1.3.6.1.4.1.637.54.1.1.3.1.108 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable Sftp service, the default value is enabled
| ||||
| SopticsIMNeLongitude | 1.3.6.1.4.1.637.54.1.1.3.1.110 | DisplayString (SIZE (0..33)) | RW | |
scalar · DisplayString (SIZE (0..33)) · read-write · current This object contains the real number describing the longitude encoded as a printable string. The precision is limited by 32 characters within the range -90..90 degrees. Positive numbers indicate locations north of the equator. The value is encoded as strings as to avoid the precision limitations imposed by encoding as unsigned integers. Although this might not be considered optimal, it allows for a very high degree of precision with an acceptable average encoded record length. | ||||
| SopticsIMNeLatitude | 1.3.6.1.4.1.637.54.1.1.3.1.111 | DisplayString (SIZE (0..33)) | RW | |
scalar · DisplayString (SIZE (0..33)) · read-write · current This object contains the real number describing the latitude encoded as a printable string. The precision is limited by 32 characters within the range -180..180 degrees. Positive numbers indicate locations east of the prime meridian. The value is encoded as strings as to avoid the precision limitations imposed by encoding as unsigned integers. Although this might not be considered optimal, it allows for a very high degree of precision with an acceptable average encoded record length. | ||||
| SopticsIMNeHttpServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.112 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the HTTP Server hosted on the NE. This information is used by the HTTP Client to connect the HTTPserver. | ||||
| SopticsIMHttpsStatus | 1.3.6.1.4.1.637.54.1.1.3.1.113 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable HTTPS service for remote and local access, the default value is disabled.
| ||||
| SopticsIMNeAltitude | 1.3.6.1.4.1.637.54.1.1.3.1.114 | DisplayString (SIZE (0..33)) | RW | |
scalar · DisplayString (SIZE (0..33)) · read-write · current This object contains the real number describing the altitude (height from a reference 0 value) encoded as a printable string. The precision is limited by 32 characters within the range 0..5000 meters (the mesusre unit). The value is encoded as strings as to avoid the precision limitations imposed by encoding as unsigned integers. Although this might not be considered optimal, it allows for a very high degree of precision with an acceptable average encoded record length. | ||||
| TopticsIMAlarmsSeveritySummaryTable | 1.3.6.1.4.1.637.54.1.1.3.1.115 | NA | ||
table · not-accessible · current This table gives the number of alarms currently raised in the node per each severity level. | ||||
| RopticsIMAlarmsSeveritySummaryEntry | 1.3.6.1.4.1.637.54.1.1.3.1.115.1 | NA | ||
row · not-accessible · current Information about he number of alarms currently raised in the node per severity level. Entries in this table are created by the node at start-up. | ||||
| CopticsIMAlarmsSeveritySummaryIndex | 1.3.6.1.4.1.637.54.1.1.3.1.115.1.1 | TsdimAPTAlmSeverity | NA | |
column · TsdimAPTAlmSeverity · not-accessible · current See textual conventions. | ||||
| CopticsIMAlarmsSeveritySummaryTotal | 1.3.6.1.4.1.637.54.1.1.3.1.115.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Total number of alarms currently raaised for this severity level. | ||||
| NtsdimSupportMibObjSwdlServ | 1.3.6.1.4.1.637.54.1.1.3.1.500 | |||
| SopticsImSwdlServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.500.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsImSwdlServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.500.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsImSwdlServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.500.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsImSwdlServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.500.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of Swdl Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsImSwdlServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.500.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of Swdl Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsImSwdlServerIPv6Address | 1.3.6.1.4.1.637.54.1.1.3.1.500.6 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current This object contains the Address of the SWDL Server in the IPv6 format. This information is used by the SWDL Client to connect the SWDL server. | ||||
| NtsdimSupportMibObjSwdlOp | 1.3.6.1.4.1.637.54.1.1.3.1.515 | |||
| SopticsIMSwdlPercentage | 1.3.6.1.4.1.637.54.1.1.3.1.515.1 | INTEGER (0..100) | RO | |
scalar · INTEGER (0..100) · read-only · current This object contains the percentage of SW Package transferred. This value is used by the managing System to poll SWDL information. | ||||
| SopticsIMSwdlTotalBytes | 1.3.6.1.4.1.637.54.1.1.3.1.515.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object contains the total number of bytes of SW Package transferred. This value is used by the managing System to poll SWDL information. | ||||
| SopticsIMSwdlCurrentSwUnitVersion | 1.3.6.1.4.1.637.54.1.1.3.1.515.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current This object contains the Version of the SW Unit in transfer. This value is used by the managing System to poll SWDL information. | ||||
| SopticsIMSwdlCurrentSwUnitLabel | 1.3.6.1.4.1.637.54.1.1.3.1.515.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current This object contains the Label of the SW Unit in transfer. This value is used by the managing System to poll SWDL information. | ||||
| SopticsImSwdlResult | 1.3.6.1.4.1.637.54.1.1.3.1.515.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object contains the Result of Software Download operation. This value is used by the managing System to poll SWDL information. When Software Downwload is in progress opticsImSwdlResult takes the value underDownloading, otherwise it reports the Result of Software Download operation.
| ||||
| SopticsImSwdlServerTrasferProtocolType | 1.3.6.1.4.1.637.54.1.1.3.1.515.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object contains the type of Transfer Protocol of the SWDL Server. This information is used by the NE to use the correct SWDL Client type to connect the SWDL server.
| ||||
| SopticsImSwdlServerSecureTrasferProtocolHostKey | 1.3.6.1.4.1.637.54.1.1.3.1.515.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the host key of the SWDL Server. This information is used by the SWDL Client type to connect the SWDL server in case sFtp protocol (opticsImSwdlServerTrasferProtocolType = sFerverFtp). The default value is a null string. | ||||
| SxhaulSwdlSwNextFile | 1.3.6.1.4.1.637.54.1.1.3.1.515.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current This attribute indicates the name of the next file to be transferred to the node for Sw Download. | ||||
| SxhaulSwdlSwProcessFile | 1.3.6.1.4.1.637.54.1.1.3.1.515.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates that the file for Sw Download has been transferred to the node and ready to be taken into account. | ||||
| NopticsIMSupportMibObjAbnCond | 1.3.6.1.4.1.637.54.1.1.3.1.530 | |||
| SopticsIMActiveAbnCond | 1.3.6.1.4.1.637.54.1.1.3.1.530.1 | TruthValue | RO | |
scalar · TruthValue · read-only · current This object specifies whether at least one abnormal condition is present in the NE (TRUE). | ||||
| TopticsIMAbnCondAffectedObjectsListTable | 1.3.6.1.4.1.637.54.1.1.3.1.530.2 | NA | ||
table · not-accessible · current This table contains the list of objects affected by an abnormal condition. | ||||
| RopticsIMAbnCondAffectedObjectsListEntry | 1.3.6.1.4.1.637.54.1.1.3.1.530.2.1 | NA | ||
row · not-accessible · current An entry of the abnormal condition affected object list table. | ||||
| CopticsIMAbnCondAffectedObjectsListIndex | 1.3.6.1.4.1.637.54.1.1.3.1.530.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object represents the index of the table. | ||||
| CopticsIMAbnCondAffectedObjectInstanceId | 1.3.6.1.4.1.637.54.1.1.3.1.530.2.1.2 | InstancePointer | RO | |
column · InstancePointer · read-only · current This object represents the instance identifier of an object affected by an abnormal condition. | ||||
| CopticsIMOffNormalDescription | 1.3.6.1.4.1.637.54.1.1.3.1.530.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current This object represents the description of an abnormal (off normal) condition. | ||||
| SopticsImManagementProtocolsCapability | 1.3.6.1.4.1.637.54.1.1.3.1.1110 | Bits | RO | |
scalar · Bits · read-only · current A value that uniquely identifies the set of the main supported management protocols
| ||||
| SopticsIMFileTrasferProtocolType | 1.3.6.1.4.1.637.54.1.1.3.1.1111 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object contains the type of File Transfer Protocol to use on agent for file exchange with Server on manager side. This information is used by the NE to use the correct ftp Client type to connect the ftp server.
| ||||
| SopticsImSecureFileTrasferProtocolHostKey | 1.3.6.1.4.1.637.54.1.1.3.1.1112 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the host key of the Ftp Server. This information is used by the Ftp Client to connect the Ftp server in case secureFtp protocol (opticsIMFileTrasferProtocolType = sFtpServer ). The default value is a null string. | ||||
| NopticsIMSupportMibObjAntiTheft | 1.3.6.1.4.1.637.54.1.1.3.1.1113 | |||
| SopticsIMAntiTheftAdminStatus | 1.3.6.1.4.1.637.54.1.1.3.1.1113.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object allows to enable/disable the Anti-Theft procedure by managing system.
| ||||
| SopticsIMAntiTheftTimerExpiration | 1.3.6.1.4.1.637.54.1.1.3.1.1113.2 | Integer32 (24..168) | RW | |
scalar · Integer32 (24..168) · read-write · current This object allows to define the timer expiration, measured in units of hours, for the Anti-Theft procedure. | ||||
| SopticsIMAntiTheftManagerKeyCode | 1.3.6.1.4.1.637.54.1.1.3.1.1113.3 | OCTET STRING (SIZE (0..1024)) | RW | |
scalar · OCTET STRING (SIZE (0..1024)) · read-write · current This object allows to update, by managing system to the device, the Network Manager Key code . | ||||
| !opticsIMSendKeyCode | 1.3.6.1.4.1.637.54.1.1.3.1.1113.4 | |||
notification · current Indicates the notification to require the managing system to send the Network Manager key code. | ||||
| NopticsIMSupportMibObjFileTransferServ | 1.3.6.1.4.1.637.54.1.1.3.1.1114 | |||
| SopticsIMFileTransferServerAddress | 1.3.6.1.4.1.637.54.1.1.3.1.1114.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object contains the Address of the SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferServerPort | 1.3.6.1.4.1.637.54.1.1.3.1.1114.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object contains the Port of the SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferServerUserId | 1.3.6.1.4.1.637.54.1.1.3.1.1114.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the UserId of SWDL Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferServerPassword | 1.3.6.1.4.1.637.54.1.1.3.1.1114.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Password of Swdl Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferServerRootDir | 1.3.6.1.4.1.637.54.1.1.3.1.1114.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object contains the Root Directory of Swdl Server. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferServerAddressIpv6 | 1.3.6.1.4.1.637.54.1.1.3.1.1114.6 | InetAddressIPv6 | RW | |
scalar · InetAddressIPv6 · read-write · current This object contains the Address of the SWDL Server in the IPv6 format. This information is used by the SWDL Client to connect the SWDL server. | ||||
| SopticsIMFileTransferState | 1.3.6.1.4.1.637.54.1.1.3.1.1114.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute is used to trace the file transfer phase.
| ||||
| SopticsIMRSLFileName | 1.3.6.1.4.1.637.54.1.1.3.1.1115 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates name of the RSL file to be transferred. | ||||
| SopticsIMIANDCFileName | 1.3.6.1.4.1.637.54.1.1.3.1.1116 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates name of the Installation and Commisioning file to be transferred. | ||||
| NopticsIMSupportMibObjPswdUpdateServ | 1.3.6.1.4.1.637.54.1.1.3.1.1117 | |||
| SopticsImPasswordUpdateFilename | 1.3.6.1.4.1.637.54.1.1.3.1.1117.1 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute indicates the name of the file to be transferred for the password update process. | ||||
| SopticsImPasswordUpdateFileHash | 1.3.6.1.4.1.637.54.1.1.3.1.1117.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current This attribute contains the hash of the file to be transferred for the password update process. | ||||
| SopticsIMPasswordUpdateResult | 1.3.6.1.4.1.637.54.1.1.3.1.1117.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object represents the result of a Password Update process.
| ||||
| NtsdimSupportMCConf | 1.3.6.1.4.1.637.54.1.1.99.1 | |||
| NtsdimSupportMCCompl | 1.3.6.1.4.1.637.54.1.1.99.1.1 | |||
| MtsdimSupportMc | 1.3.6.1.4.1.637.54.1.1.99.1.1.1 | |||
compliance · current This module compliance describes a set of objects required for TSD-IM SNMP Agent implementation. These objects are defined inside tsdimSupportMib
| ||||
| NtsdimSupportMCGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2 | |||
| GtsdimAlarmLogGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.1 | |||
group · current This group describes the mandatory objects needed for the Alarm Log management configuration. | ||||
| GtsdimAPTGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.2 | |||
group · current This group describes the mandatory objects needed for the APT management configuration. | ||||
| GtsdimLogMngmtGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.3 | |||
group · current This group lists objects needed for Log, both event and alarm, configuration. | ||||
| GtsdimEventLogGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.6 | |||
group · current This group describes the mandatory objects needed for the Event Log management configuration. | ||||
| GtsdimAuxEventObjectsGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.7 | |||
group · current This group describes the mandatory objects needed for the notification, both events and alarms, management. | ||||
| GtsdimOptAuxObjectsGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.9 | |||
group · current This group describes the mandatory objects needed for the notification, both events and alarms, management.
| ||||
| GtsdimEventNotificationGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.10 | |||
group · current This group describes the SNMP NE notifications, not alarms. | ||||
| GtsdimAlertNotificationGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.11 | |||
| GtsdimAlertObjectGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.12 | |||
group · current This group describes the SNMP NE alert objects. | ||||
| GtsdimEFDGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.13 | |||
group · current This group describes the EFD mandatory objects. | ||||
| GtsdimOptEFDGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.14 | |||
group · current This group describes the EFD optional objects. | ||||
| GtsdimASAPGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.15 | |||
group · current This group describes the ASAP mandatory objects. | ||||
| GopticsIMSupportBckRstGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.16 | |||
group · current This group compounds object for backup and restore functionality
| ||||
| GtsdimGenEventLogGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.17 | |||
group · current This group describes the mandatory objects needed for the Event Log management configuration.
| ||||
| GopticsIMSwPackageGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.18 | |||
group · current This group describes the mandatory objects needed for the Software Package management. | ||||
| GopticsIMSwUnitGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.19 | |||
group · current This group describes the mandatory objects needed for the Sofwtare Unit management. | ||||
| GopticsIMSwDwlGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.20 | |||
group · current This group describes the mandatory objects needed for the Sofwtare Download management.
| ||||
| GopticsIMNERestartGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.21 | |||
group · current This group describes the objects needed for the NE restart.
| ||||
| GopticsIMAbnCondGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.22 | |||
group · current This group describes the objects needed for the Abnormal Condition management. | ||||
| GtsdimASAPOptGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.24 | |||
group · current This group describes the ASAP optional objects. | ||||
| GtsdimOptAPTGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.25 | |||
group · current This group describes the APT optional objects. | ||||
| GtsdimOptEventLogGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.26 | |||
group · current This group describes the event log optional objects. | ||||
| GtsdimOptAlarmLogGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.27 | |||
group · current This group describes the alarm log optional objects. | ||||
| GopticsIMEqptSwUnitGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.28 | |||
group · current This group describes the objects needed for the management of the Sofwtare Unit present i the equipment. | ||||
| GopticsIMOptAbnCondGroup | 1.3.6.1.4.1.637.54.1.1.99.1.2.29 | |||
group · current This group describes the abnormal condition optional objects.
| ||||
Textual conventions
InetAddressIPv6OCTET STRING (SIZE (16))Display hint:
2x:2x:2x:2x:2x:2x:2x:2xRepresents an IPv6 network address: Octets Contents Encoding 1-16 IPv6 address network-byte order The corresponding InetAddressType value is ipv6(2). This textual convention SHOULD NOT be used directly in object definitions, as it restricts addresses to a specific format. However, if it is used, it MAY be used either on its own or in conjunction with InetAddressType, as a pair.
Traps / Notifications
- opticsIMProtectionSwitchReporting
1.3.6.1.4.1.637.54.1.1.3.1.38 - opticsIMSendKeyCode
1.3.6.1.4.1.637.54.1.1.3.1.1113.4 - tsdimAVCNotification
1.3.6.1.4.1.637.54.1.1.3.1.20 - tsdimAlertNotification
1.3.6.1.4.1.637.54.1.1.3.1.22 - tsdimObjectCreationNotification
1.3.6.1.4.1.637.54.1.1.3.1.18 - tsdimObjectDeletionNotification
1.3.6.1.4.1.637.54.1.1.3.1.19 - tsdimRowChangeNotification
1.3.6.1.4.1.637.54.1.1.3.1.36 - tsdimStateChangeNotification
1.3.6.1.4.1.637.54.1.1.3.1.21
Groups and compliance
- opticsIMAbnCondGroup
- opticsIMEqptSwUnitGroup
- opticsIMNERestartGroup
- opticsIMOptAbnCondGroup
- opticsIMSupportBckRstGroup
- opticsIMSwDwlGroup
- opticsIMSwPackageGroup
- opticsIMSwUnitGroup
- tsdimAPTGroup
- tsdimASAPGroup
- tsdimASAPOptGroup
- tsdimAlarmLogGroup
- tsdimAlertNotificationGroup
- tsdimAlertObjectGroup
- tsdimAuxEventObjectsGroup
- tsdimEFDGroup
- tsdimEventLogGroup
- tsdimEventNotificationGroup
- tsdimGenEventLogGroup
- tsdimLogMngmtGroup
- tsdimOptAPTGroup
- tsdimOptAlarmLogGroup
- tsdimOptAuxObjectsGroup
- tsdimOptEFDGroup
- tsdimOptEventLogGroup
- tsdimSupportMc