MIB Browser
Added the possible type of information (OID | Integer) you can add to
Alarm Specific Problem attribute
Organization
Alcatel TND
Root OID
1.3.6.1.4.1.637.54.1.1.100
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m TSDIM-SNMP-TC -Tp
snmpwalk -v2c -c <community> -m TSDIM-SNMP-TC <host> 1.3.6.1.4.1.637.54.1.1.100

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, PhysAddress, RowPointer, TEXTUAL-CONVENTION, TruthValue
TSDIM-BASICREG-MIBtsdimBasicMib

OID tree

NameOIDTypeAccessStatus
ItsdimSnmpTc1.3.6.1.4.1.637.54.1.1.100

Textual conventions

GenEventLogObj OCTET STRING
The semantic of this field depends on the type of event.
OpticsIMUserLabel DisplayString
This object assigns a user friendly name to the associated object.
The size of this string can not exceed 30 bytes.
SLValue Integer32
Represents the signal label (SL) numeric value.
The value -1 represents a Null value for
interfaces not supporting the SL mechanism
(e.g. PDH 2Mb/s interfaces) or when
the SL value is not known by the agent.
In case of higher-order SDH VCs
(e.g. VC-3, VC-4 or VC-4-4c)
this value can be the null code
(i.e. the -1 value) or one of
the codes (in the 0-255 range)
defined for the C2 byte in G.707.
All the other values are invalid.
In case of lower-order SDH VCs (e.g. VC-12)
this value can be the null code
(i.e. the -1 value) or
one of the values that can be
obtained concatenating an 8bit word
representing the extended signal
label (ESL) value defined for the K4(1)
bits and a 3bit word representing
the SL value defined for the
V5[5-7] bits, according to G.707.
The first 8bits are all equal to 0 when
the V5[5-7] bits are different from 101.
The value 6 represents the escape
code in the V5[5-7] bits but an unknown
code in the K4(1) bits (e.g. because
the ESL mechanism is not supported).
All the other values are invalid.
In case of 34Mb/s PDH TPs, according to
the G.832 mapping, this value can be
the null code (i.e. the -1 value) or
one of the codes (in the 0-7 range)
defined for the MA[3-5] bits in G.832.
All the other values are invalid.
TsdimAPTAlmSeverity INTEGER

critical(1) indeterminate(5) major(2) minor(3) warning(4)

The value of this object identifies the severity of
an alarm stored in APT Table.
The cleared severity is not foreseen inside APT table.
TsdimAdministrativeState INTEGER

locked(0) shuttingDown(2) unlocked(1)

This textual convention defines a generic administrative state
object.
As generic behavior a Manager uses the administrative state
in order to activate or de-activate the associated functionality.
TsdimAlmProbableCause OBJECT IDENTIFIER
This object is used to specify the OID of the
generated notification. The notification OID represent the
alarm probable cause.
TsdimAlmSeverity INTEGER

cleared(6) critical(1) indeterminate(5) major(2) minor(3) warning(4)

The value of this object identifies the severity of
an alarm that has occurred.
TsdimAlmSpecProblem DisplayString
This object contains the alarm specific problem description.
Indicates further refinements to the problem identified
by the alarm type.  If more than one specific problem
is described in this object, the problem descriptions are
separated by <;> characters. The format of the displayString
is defined as follow:
String | OID | ({String;}((OID | Integer);)*)
TsdimEventTimeInt TimeTicks
This is the translation in integer of the time at which
the event/alarm has been generated. It is calculated as the
number of seconds starting from the 1-1-1970.
TsdimManagerRole INTEGER

main(1) spare(2)

The role of manager (main / spare)
TsdimManagerType INTEGER

eml(1) localct(4) mapper(3) nml(2) remotect(5)

This object indicates the admitted type of managers.
TsdimNotificationId Counter32
This object contains a unique event/alarm numbering.
TsdimObjectClassId Integer32
This object represents the SNMP entry table
object identity (Managed Object Class) of the instance
where the event/alarm occured. It is defined as the length of the
SNMP instance identifier without the index values.
TsdimObjectInstanceId OBJECT IDENTIFIER
This object is the SNMP instance identifier (row entry
identifier + indexes values) where the event/alarm occured.
TsdimOperationalState INTEGER

disabled(0) enabled(1)

This textual convention defines a generic operational state
object.
As generic behavior an Agent uses the operational state
in order to enable or disable the associated functionality.
TsdimUdpPort OCTET STRING
This textual convention define the SNMP UDP Port
associated to the application.

Used by