OpticsIMETS-MIB
Nokia (formerly 'Alcatel-Lucent')TSDnm93270 (change by D. Ricco) Changes the definition of the following modes: - OpticsIMETSInFlowServiceType, - OpticsIMETSOutFlowServerType - OpticsIMETSFlowServiceType with addition of new values (ces, ces-pb, ces-pw) to the enumerative set (applicability for Circuit emulation service). Changed description of opticsIMETSCrossConnectServiceTypeIndex of opticsIMETSCrossConnectServiceTypeEntry for XConnected table per service type
snmptranslate -m OpticsIMETS-MIB -Tpsnmpwalk -v2c -c <community> -m OpticsIMETS-MIB <host> 1.3.6.1.4.1.637.54.1.25.3Imports
| IF-MIB | ifIndex |
|---|---|
| OPTICSIM-ETHREG-MIB | opticsimEthMC, opticsimEthMib |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TSDIM-SNMP-TC | OpticsIMUserLabel |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IopticsIMETSMib | 1.3.6.1.4.1.637.54.1.25.3 | |||
identity TSDnm93270 (change by D. Ricco) Changes the definition of the following modes: - OpticsIMETSInFlowServiceType, - OpticsIMETSOutFlowServerType - OpticsIMETSFlowServiceType with addition of new values (ces, ces-pb, ces-pw) to the enumerative set (applicability for Circuit emulation service). Changed description of opticsIMETSCrossConnectServiceTypeIndex of opticsIMETSCrossConnectServiceTypeEntry for XConnected table per service type | ||||
| NopticsIMETSObjects | 1.3.6.1.4.1.637.54.1.25.3.1 | |||
| SopticsIMETSTrafficDescrIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.1 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSTrafficDescrIndex when creating entries in the opticsIMETSTrafficDescrTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSTrafficDescrIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. | ||||
| TopticsIMETSTrafficDescrTable | 1.3.6.1.4.1.637.54.1.25.3.1.2 | NA | ||
table · not-accessible · current This table contains information on ETS Traffic Descriptor type and the associated parameters. | ||||
| RopticsIMETSTrafficDescrEntry | 1.3.6.1.4.1.637.54.1.25.3.1.2.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSTrafficDescrTable. | ||||
| CopticsIMETSTrafficDescrIndex | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.1 | OpticsIMETSTrafficDescrIndex | NA | |
column · OpticsIMETSTrafficDescrIndex · not-accessible · current This object is used by the opticsIMETSInFlowTable to identify the row of this table. When creating a new row in the table the value of this index may be obtained by retrieving the value of opticsIMETSTrafficDescrIndexNext. The range is 1..MAXTrafficDescr, where MAXTrafficDescr is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSTrafficDescrType | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.2 | OpticsIMETSTrafficDescrType | RC | |
column · OpticsIMETSTrafficDescrType · read-create · current The value of this object identifies the type of ETS
Traffic Descriptor with one or more parameters.
These parameters are specified as a parameter vector,
in the corresponding instances of the objects:
opticsIMETSTrafficDescrParam1
opticsIMETSTrafficDescrParam2
opticsIMETSTrafficDescrParam3
opticsIMETSTrafficDescrParam4
opticsIMETSTrafficDescrParam5. | ||||
| CopticsIMETSTrafficDescrParam1 | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The first parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType. | ||||
| CopticsIMETSTrafficDescrParam2 | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The second parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType. | ||||
| CopticsIMETSTrafficDescrParam3 | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The third parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType. | ||||
| CopticsIMETSTrafficDescrParam4 | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The fourth parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType. | ||||
| CopticsIMETSTrafficDescrParam5 | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.7 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The fifth parameter of the ETS Traffic used according to the value of opticsIMETSTrafficDescrType. | ||||
| CopticsIMETSTrafficDescrUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.8 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The canonical name assigned to the traffic descriptor. | ||||
| CopticsIMETSTrafficDescrRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete an existing row in this table. | ||||
| CopticsIMETSTrafficDescrAdmittedMcRate | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.10 | Gauge32 | RC | |
column · Gauge32 · read-create · current This attribute carries out 'on per flow basis' ingress admitted multicast rate (the threshold value of admitted bandwidth for NE generated multicast traffic as admitted on per <ingress interface, ingress flow> basis) and is specified in kilobits per second (Kbps). This value is requested to trigger discarding of NE generated multicast traffic received on this ingress interface and is minor or equal to that specified in ifSpeed for this interface. ifSpeed value for this attribute means that the multicast rate limitation on <ingress interface, ingress flow> basis is disabled; this is the default value. Null value for this attribute means discarding of NE generated multicast traffic associated to <ingress interface, ingress flow> logical pair | ||||
| CopticsIMETSTrafficDescrAdmittedUnknRate | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.11 | Gauge32 | RC | |
column · Gauge32 · read-create · current This attribute carries out 'on per flow basis' ingress admitted unknown traffic rate (the threshold value of admitted bandwidth for unknown traffic as admitted on per <ingress interface, ingress flow> basis) and is specified in kilobits per second (Kbps). This value is requested to trigger discarding of unknown traffic on this ingress interface and is minor or equal to that specified in ifSpeed for this interface. ifSpeed value for this attribute means that the unknown traffic rate limitation on <ingress interface, ingress flow> basis is disabled; this is the default value. Null value for this attribute means discarding of NE unknown traffic associated to <ingress interface, ingress flow> logical pair | ||||
| CopticsIMETSTrafficDescrMcType | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.12 | OpticsIMETSTrafficDescrType | RC | |
column · OpticsIMETSTrafficDescrType · read-create · current The value of this object identifies the type of ETS
Traffic Descriptor for Multicast Traffic. Default value:
ETS Traffic descriptor type assigned to Unicast Traffic | ||||
| CopticsIMETSTrafficDescrUnknType | 1.3.6.1.4.1.637.54.1.25.3.1.2.1.13 | OpticsIMETSTrafficDescrType | RC | |
column · OpticsIMETSTrafficDescrType · read-create · current The value of this object identifies the type of ETS
Traffic Descriptor for Unknown Traffic. Default value:
ETS Traffic descriptor type assigned to Unicast Traffic | ||||
| SopticsIMETSInFlowIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.3 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSInFlowIndex when creating entries in the opticsIMETSInFlowTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSInFlowIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. | ||||
| TopticsIMETSInFlowTable | 1.3.6.1.4.1.637.54.1.25.3.1.4 | NA | ||
table · not-accessible · current This table specifies informations regarding ETS ingress flow. | ||||
| RopticsIMETSInFlowEntry | 1.3.6.1.4.1.637.54.1.25.3.1.4.1 | NA | ||
| CopticsIMETSInFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.1 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current Index for the conceptual row identifying a flow within this ETS ingress flow table. The range is 1..MAXInFlow, where MAXInFlow is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSInFlowServiceType | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.2 | OpticsIMETSInFlowServiceType | RC | |
column · OpticsIMETSInFlowServiceType · read-create · current It indicates the service type to be carried over this flow. The default value is 'ethernet'. | ||||
| CopticsIMETSInFlowServiceID | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.3 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current This object contains an appropriate value service type
dependent.
If the opticsIMInFlowServiceType is equal to 'ethernet',
this object is used to specify the ifIndex of the
Ethernet port associated with this flow.
If the opticsIMInFlowServiceType is equal to 'mpls',
this object is used to specify the
opticsIMMPLS2ETSMappingIndex of the
opticsIMMPLS2ETSMappingTable.
If the opticsIMInFlowServiceType is equal to
'providerBridge',this object is used to
specify the opticsIMSVLAN2ETSMappingIndex of the
opticsIMSVLAN2ETSMappingTable.
If the opticsIMInFlowServiceType is equal to 'pbb',
this object is used to specify PBB Instance Entry
associated with this flow.
The default value is 0 and indicates that
this object is not yet set. | ||||
| CopticsIMETSInFlowUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.4 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The canonical user label assigned to the flow. | ||||
| CopticsIMETSInFlowTrafficDescr | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.5 | OpticsIMETSTrafficDescrIndex | RC | |
column · OpticsIMETSTrafficDescrIndex · read-create · current It identifies the row in the opticsIMETSTrafficDescrTable which applies to the ETS flow, both in input and output direction. | ||||
| CopticsIMETSInFlowType | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.6 | OpticsIMETSFlowType | RC | |
column · OpticsIMETSFlowType · read-create · current This object is used to specify the flow type. The value 'unicastAutolearning(1)' is possible only if opticsIMETSInFlowServiceType is equal to 'ethernet(1)'. The default value is 'unicastNoAutolearning'. | ||||
| CopticsIMETSInFlowPolicingMode | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.7 | OpticsIMETSPolicingMode | RC | |
column · OpticsIMETSPolicingMode · read-create · current It defines the ETS Policing Mode. By default, policing is 'colorBlind'. | ||||
| CopticsIMETSInFlowCrossConnectIdentifier | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.8 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This object indicates that an ingress flow is cross-connected to other egress flows that belong to the same flow. All such associated ingress and egress flows have the same value of this object, and all their cross-connections are identified by entries in the opticsIMETSCrossConnectTable for which opticsIMETSCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the opticsIMETSCrossConnectTable have been created. The value '0' indicates that this object in not yet used in a cross-connection. | ||||
| CopticsIMETSInFlowRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| CopticsIMETSInFlowVlanPop | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.10 | OpticsIMVlanConfiguration | RC | |
column · OpticsIMVlanConfiguration · read-create · current It enables/ disables the VLAN Pop Configuration. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet'. The default value is 'disabled'. | ||||
| CopticsIMETSInFlowColorProfilePointer | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.11 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current This object points to a row in the opticsIMColorProfileTable. It defines the Color Profile associated with priority bits in the 'colorAware' mode. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet'. A value of 0 indicates that no Color Profile has been associated with this InFlow and then the 'colorBlind' mode is used. The default value is 0. | ||||
| CopticsIMETSInFlowLayer2ProtocolList | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.12 | OpticsIMLayer2ProtocolList | RC | |
column · OpticsIMLayer2ProtocolList · read-create · current This parameter enables to choose if to tunnel, toward a Provider Network, or filter data and Layer 2 Control frames. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. Default value is all bits set to 1, so tunneling everything. This parameter is significant only if the ServiceType is 'ethernet'. | ||||
| CopticsIMETSInFlowL2ActualProtocolList | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.13 | OpticsIMLayer2ProtocolList | RO | |
column · OpticsIMLayer2ProtocolList · read-only · current This parameter reports weather a Data or a Layer 2 Control frame will be tunneled, toward a Provider Network, or filtered. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. This parameter is significant only if the ServiceType is 'ethernet'. In this case, the value is obtained as a logical AND between the object opticsIMETSInFlowLayer2ProtocolList and the object opticsIMEthLayer2ProtocolList in the OpticsIMEthConfTable in the row with ifIndex=opticsIMETSInFlowServiceID. | ||||
| CopticsIMETSInFlowGroupID | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.14 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter defines the ETS Flow Group this ETS Input Flow belongs to. The value 0 represents the case where the ETS Flow does not belong to any ETS Flow Group. The default value is 0. | ||||
| CopticsIMETSInFlowClassificationMode | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.15 | OpticsIMETSclassMode | RC | |
column · OpticsIMETSclassMode · read-create · current This object is used to define the type of classification on incoming frames: either by priority bits or by Ip Dscp bits. It also allows a related classification check between the values written in opticsIMEth2ETSFlowClassifierTable and in opticsIMETSColorProfileTable. The default value is priority(0). | ||||
| CopticsIMETSInFlowUseDEI | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current This object contains information about DEI Use (Default value: false) on incoming S-Tagged frames. The value of this object is meaningful only if opticsIMETSInFlowServiceType is 'ethernet' | ||||
| CopticsIMETSInFlowControlWord | 1.3.6.1.4.1.637.54.1.25.3.1.4.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current This parameter enables the usage of the Martini Control Word when decapsulating Ethernet over MPLS. Default value is False. This parameter is significant only if the ServiceType is 'mpls' | ||||
| SopticsIMETSOutFlowIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.5 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSOutFlowIndex when creating entries in the opticsIMETSOutFlowTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSOutFlowIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to reflect the next unassigned index. | ||||
| TopticsIMETSOutFlowTable | 1.3.6.1.4.1.637.54.1.25.3.1.6 | NA | ||
table · not-accessible · current This table contains information about ETS egress flow. | ||||
| RopticsIMETSOutFlowEntry | 1.3.6.1.4.1.637.54.1.25.3.1.6.1 | NA | ||
| CopticsIMETSOutFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.1 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current A unique value to identify the egress flow. The range is 1..MAXOutFlow, where MAXOutFlow is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSOutFlowServerType | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.2 | OpticsIMETSOutFlowServerType | RC | |
column · OpticsIMETSOutFlowServerType · read-create · current Set by the operator to indicate the PSN type on which this flow will be carried. The default value is 'ethernet'. | ||||
| CopticsIMETSOutFlowServerID | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.3 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current This object contains an appropriate value server type
dependent.
If the opticsIMOutFlowServerType is equal to 'ethernet',
this object is used to specify the ifIndex of the
Ethernet port associated with this flow.
If the opticsIMOutFlowServerType is equal to 'mpls',
this object is used to specify the
opticsIMETS2MPLSMappingIndex of the
opticsIMETS2MPLSMappingTable.
If the opticsIMOutFlowServerType is equal to
'providerBridge',this object is used to
specify the opticsIMETS2SVLANMappingIndex
of the opticsIMETS2SVLANMappingTable.
If the opticsIMOutFlowServerType is equal to 'pbb',
this object is used to specify Optics PBB Instance Entry
associated with this flow.
The default value is 0 and indicates that
this object is not yet set. | ||||
| CopticsIMETSOutFlowUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.4 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The canonical user label assigned to the flow. | ||||
| CopticsIMETSOutFlowCrossConnectIdentifier | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.5 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This object indicates that an egress flow is cross-connected to another ingress flow that belong to the same flow. All such associated ingress and egress flows have the same value of this object, and all their cross-connections are identified by entries in the opticsIMETSCrossConnectTable for which opticsIMETSCrossConnectIndex has the same value. The value of this object is initialized by the agent after the associated entries in the opticsIMETSCrossConnectTable have been created. The value '0' indicates that this object in not yet used in a cross-connection. | ||||
| CopticsIMETSOutFlowRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| CopticsIMETSOutFlowVlanStackPointer | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.7 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current This object points to a row in the opticsIMETSVlanStackConfTable. It defines the Vlan Stack Configuration. The value of this object is meaningful only if opticsIMETSOutFlowServerType is 'ethernet'. A value of 0 indicates that no Vlan Push has been associated with this OutFlow. The default value is 0. | ||||
| CopticsIMETSOutFlowControlWord | 1.3.6.1.4.1.637.54.1.25.3.1.6.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This parameter enables the usage of the Martini Control Word when encapsulating Ethernet over MPLS. Default value is False. This parameter is significant only if the ServerType is 'mpls' | ||||
| SopticsIMETSCrossConnectIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.7 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSCrossConnectIndex when creating entries in the opticsIMETSCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index. | ||||
| TopticsIMETSCrossConnectTable | 1.3.6.1.4.1.637.54.1.25.3.1.8 | NA | ||
table · not-accessible · current The ETS Cross Connect table. An ETS cross-connection which cross-connects an ingress and one or more egress flow is modeled as one entry in this table. | ||||
| RopticsIMETSCrossConnectEntry | 1.3.6.1.4.1.637.54.1.25.3.1.8.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSCrossConnectTable. | ||||
| CopticsIMETSCrossConnectIndex | 1.3.6.1.4.1.637.54.1.25.3.1.8.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current A unique value to identify this ETS cross-connect. The range is 1..MAXCrossConnect, where MAXCrossConnect is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSCrossConnectInFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.8.1.2 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable. | ||||
| CopticsIMETSCrossConnectOutFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.8.1.3 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSOutFlowIndex value of opticsIMETSOutFlowTable. | ||||
| CopticsIMETSCrossConnectRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| SopticsIMEth2ETSFlowClassifierIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.9 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMEth2ETSFlowClassifierIndex when creating entries in the opticsIMEth2ETSFlowClassifierTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMEth2ETSFlowClassifierIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index. | ||||
| TopticsIMEth2ETSFlowClassifierTable | 1.3.6.1.4.1.637.54.1.25.3.1.10 | NA | ||
table · not-accessible · current This table provides Ethernet port mapping, Ethernet type content
value, VLAN
and priority or IpDscp configuration for each
Ethernet ingress flow.
This table is indexed by the same index that was created
for the associated entry of the opticsIMETSInFlowTable.
The opticsIMETSInFlowIndex and the
opticsIMEth2ETSFlowClassifierIndex are used as
indexes.
One or more entries are created in this table by the
manager only if there is an antry in the
opticsIMETSInFlowTable with an
opticsIMETSInFlowServiceType equal to 'ethernet'. | ||||
| RopticsIMEth2ETSFlowClassifierEntry | 1.3.6.1.4.1.637.54.1.25.3.1.10.1 | NA | ||
row · not-accessible · current An entry of the opticsIMEth2ETSFlowClassifierTable. | ||||
| CopticsIMEth2ETSFlowClassifierInFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.1 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable. | ||||
| CopticsIMEth2ETSFlowClassifierIndex | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.2 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A unique value to identify this Flow Classifier. The range is 1..MAXFlowClassifier, where MAXFlowClassifier is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMEth2ETSFlowClassifierVlan | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.3 | OpticsIMETSVlanCfg | RC | |
column · OpticsIMETSVlanCfg · read-create · current This object defines the VLAN on the ETS flow. The default value is 4097. | ||||
| CopticsIMEth2ETSFlowClassifierMaxVlan | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.4 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current This object is used to define the MAX value of VLAN range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVlan. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMEth2ETSFlowClassifierPriority | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.5 | OpticsmIMETSPriority | RC | |
column · OpticsmIMETSPriority · read-create · current This object defines the groups of user priority mapped into the ingress flow. The default value is 'dontCare'. | ||||
| CopticsIMEth2ETSFlowClassifierMaxPriority | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to define the MAX value of priority range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierPriority. If a range is not used the value must be set to 0. The default value is 0.
| ||||
| CopticsIMEth2ETSFlowClassifierRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Enable creating, deleting and modifying this row. | ||||
| CopticsIMEth2ETSFlowClassifierIpDscp | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.8 | OpticsIMETSIpDscp | RC | |
column · OpticsIMETSIpDscp · read-create · current This object defines the groups of user Ip Dscp values mapped into the ingress flow. The default value is 'dontCare'. | ||||
| CopticsIMEth2ETSFlowClassifierMaxIpDscp | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to define the MAX value of Ip Dscp range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierIpDscp. If a range is not used the value must be set to 0. The default value is 0.
| ||||
| CopticsIMEth2ETSFlowClassifierEthType | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current This object defines the group of Ethernet Type mapped into the ingress flow. The possible values and the related meanings for them are contained in the Functionality Specification document. The default value is 0, that means 'dontCare'. | ||||
| CopticsIMEth2ETSFlowClassifierVrid | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.11 | Unsigned32 (0..256) | RC | |
column · Unsigned32 (0..256) · read-create · current This object defines the VRID [Configurable item in the range
1-255 (decimal)] on the ETS flow. VRID is last byte in
virtual router MAC address as in rfc3768.
The virtual router MAC address associated with a virtual router is an
IEEE 802 MAC Address in the following format:
0-00-5E-00-01-{VRID} (in hex in internet standard bit-order)
The first three octets are derived from the IANA's OUI.
The next two octets (00-01) indicate the address block assigned
to the VRRP protocol.
{VRID} is the VRRP Virtual Router Identifier. This mapping
provides for up to 255 VRRP routers on a network.
Default value is 256 | ||||
| CopticsIMEth2ETSFlowClassifierMaxVrid | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.12 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current This object is used to define the MAX value of VRID range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVrid. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMEth2ETSFlowClassifierVpi | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.13 | Unsigned32 (0..4095) | RC | deprecated |
column · Unsigned32 (0..4095) · read-create · deprecated This object defines ATM VPI on the ETS flow. The default value is 4096. | ||||
| CopticsIMEth2ETSFlowClassifierMaxVpi | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.14 | Unsigned32 (0..4095) | RC | deprecated |
column · Unsigned32 (0..4095) · read-create · deprecated This object is used to define the MAX value of ATM VPI range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVpi. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMEth2ETSFlowClassifierVci | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.15 | Unsigned32 (0..65535) | RC | deprecated |
column · Unsigned32 (0..65535) · read-create · deprecated This object defines ATM VCI on the ETS flow. The default value is 65536. | ||||
| CopticsIMEth2ETSFlowClassifierMaxVci | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.16 | Unsigned32 (0..65535) | RC | deprecated |
column · Unsigned32 (0..65535) · read-create · deprecated This object is used to define the MAX value of ATM VCI range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVci. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIEth2ETSFlowClassifierSourceMacAddr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.17 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current It indicates the 48 bits source MAC address.
The specified source mac of the packet
The packet's source mac address is AND-ed with the
value of FlowClassifierSourceMacAddrBitmask and then compared
against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierSourceMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.18 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified source mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIEth2ETSFlowClassifierDestMacAddr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.19 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current It indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of FlowClassifierDestMacAddrBitmask and then compared against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierDestMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.20 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified destination mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMEth2ETSFlowClassifierInnerVlan | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.21 | OpticsIMETSVlanCfg | RC | |
column · OpticsIMETSVlanCfg · read-create · current This object defines the Inner VLAN on the ETS flow. The default value is 4097. | ||||
| CopticsIMEth2ETSFlowClassifierMaxInnerVlan | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.22 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current This object is used to define the MAX value of Inner VLAN range for this ETS ingress flow and must be greater than opticsIMEth2ETSFlowClassifierVlan. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMEth2ETSFlowClassifierInnerPriority | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.23 | OpticsmIMETSPriority | RC | |
column · OpticsmIMETSPriority · read-create · current This object defines the groups of Inner user
priority mapped into the ingress flow.
The default value is 'dontCare'. | ||||
| CopticsIMEth2ETSFlowClassifierMaxInnerPriority | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to define the MAX value of Inner
priority range for this ETS ingress flow and must
be greater than opticsIMEth2ETSFlowClassifierPriority.
If a range is not used the value must be set to 0.
The default value is 0.
| ||||
| CopticsIEth2ETSFlowClassifierSourceIPV4Addr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.25 | OCTET STRING (SIZE (4)) | RC | |
column · OCTET STRING (SIZE (4)) · read-create · current It indicates the 32 bits source IP address.
The specified source IP of the packet
The packet's source IP address is AND-ed with the
value of FlowClassifierSourceIPV4AddrBitmask and then compared
against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierSourceIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.26 | OCTET STRING (SIZE (4)) | RC | |
column · OCTET STRING (SIZE (4)) · read-create · current The specified source IPv4 address mask. If it is not configured, the default value is all 0. | ||||
| CopticsIEth2ETSFlowClassifierDestIPV4Addr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.27 | OCTET STRING (SIZE (4)) | RC | |
column · OCTET STRING (SIZE (4)) · read-create · current It indicates the 32 bits destination IPv4 address. The specified destination mac of the packet The packet's destination IPv4 address is AND-ed with the value of FlowClassifierDestIPV4AddrBitmask and then compared against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierDestIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.28 | OCTET STRING (SIZE (4)) | RC | |
column · OCTET STRING (SIZE (4)) · read-create · current The specified destination IPv4 address mask. If it is not configured, the default value is all 0. | ||||
| CopticsIEth2ETSFlowClassifierL4PortType | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies L4 port protocol type. The default value is product-specific.
| ||||
| CopticsIEth2ETSFlowClassifierSourceL4PortNumber | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.30 | Unsigned32 (0..65537) | RC | |
column · Unsigned32 (0..65537) · read-create · current It indicates the 16 bits source L4 port number. The default value is 65537 (don't care). | ||||
| CopticsIEth2ETSFlowClassifierMaxSourceL4PortNumber | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.31 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current This object is used to define the MAX value of source L4 Port number range for this ETS ingress flow and must be greater than opticsIEth2ETSFlowClassifierSourceTCPPortNumber. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIEth2ETSFlowClassifierDestL4PortNumber | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.32 | Unsigned32 (0..65537) | RC | |
column · Unsigned32 (0..65537) · read-create · current It indicates the 16 bits destination L4 port number. The default value is 65537 (don't care). | ||||
| CopticsIEth2ETSFlowClassifierMaxDestL4PortNumber | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.33 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current This object is used to define the MAX value of destination L4 Port number range for this ETS ingress flow and must be greater than opticsIEth2ETSFlowClassifierDestTCPPortNumber. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIEth2ETSFlowClassifierSourceIPV6Addr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.34 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current It indicates the 128 bits source IP address.
The specified source IP of the packet
The packet's source IP address is AND-ed with the
value of FlowClassifierSourceIPV6AddrBitmask and then compared
against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierSourceIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.35 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The specified source IPv6 address mask. If it is not configured, the default value is all 0. | ||||
| CopticsIEth2ETSFlowClassifierDestIPV6Addr | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.36 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current It indicates the 138 bits destination IPv6 address. The specified destination mac of the packet The packet's destination IPv4 address is AND-ed with the value of FlowClassifierDestIPV6AddrBitmask and then compared against the value of this object. | ||||
| CopticsIEth2ETSFlowClassifierDestIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.3.1.10.1.37 | OCTET STRING (SIZE (16)) | RC | |
column · OCTET STRING (SIZE (16)) · read-create · current The specified destination IPv6 address mask. If it is not configured, the default value is all 0. | ||||
| TopticsIMETSInFlowServiceIDTable | 1.3.6.1.4.1.637.54.1.25.3.1.11 | NA | ||
table · not-accessible · current This table is a read-only version of the opticsIMETSInFlowTable. It is ordered by ServiceID and InFlow. An entry is created, in this table, automatically by the agent, when an entry is activated by the manager in the opticsIMETSInFlowTable with opticsIMETSInFlowRowStatus equal to 'active'. An entry is deleted, in this table, automatically by the agent, when an entry is deactivated or deleted by the manager in the opticsIMETSInFlowTable with opticsIMETSInFlowRowStatus equal to 'destroy' or 'notInService'. | ||||
| RopticsIMETSInFlowServiceIDEntry | 1.3.6.1.4.1.637.54.1.25.3.1.11.1 | NA | ||
row · not-accessible · current An entry of opticsIMETSInFlowServiceIDTable. | ||||
| CopticsIMETSInFlowServiceIDServiceTypeIndex | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.1 | OpticsIMETSInFlowServiceType | NA | |
column · OpticsIMETSInFlowServiceType · not-accessible · current The value of this object is equal to opticsIMETSInFlowServiceType in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDServiceIDIndex | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.2 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current The value of this object is equal to opticsIMETSInFlowServiceID value of opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDInFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.3 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.4 | OpticsIMUserLabel | RO | |
column · OpticsIMUserLabel · read-only · current This object is the read-only version of the opticsIMETSInFlowUserLabel in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDTrafficDescr | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.5 | OpticsIMETSTrafficDescrIndex | RO | |
column · OpticsIMETSTrafficDescrIndex · read-only · current This object is the read-only version of the opticsIMETSInFlowTrafficDescr in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDFlowType | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.6 | OpticsIMETSFlowType | RO | |
column · OpticsIMETSFlowType · read-only · current This object is the read-only version of the opticsIMETSInFlowType in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDPolicingMode | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.7 | OpticsIMETSPolicingMode | RO | |
column · OpticsIMETSPolicingMode · read-only · current This object is the read-only version of the opticsIMETSInFlowPolicingMode in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDCrossConnectIdentifier | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.8 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This object is the read-only version of the opticsIMETSInFlowCrossConnectIdentifier in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDVlanPop | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.9 | OpticsIMVlanConfiguration | RO | |
column · OpticsIMVlanConfiguration · read-only · current This object is the read-only version of the opticsIMETSInFlowVlanPop in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDColorProfilePointer | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.10 | Unsigned32 (0..256) | RO | |
column · Unsigned32 (0..256) · read-only · current This object is the read-only version of the opticsIMETSInFlowColorProfilePointer in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDLayer2ProtocolList | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.11 | OpticsIMLayer2ProtocolList | RO | |
column · OpticsIMLayer2ProtocolList · read-only · current This object is the read-only version of the opticsIMETSInFlowLayer2ProtocolList in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDL2ActualProtocolList | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.12 | OpticsIMLayer2ProtocolList | RO | |
column · OpticsIMLayer2ProtocolList · read-only · current This object is the read-only version of the opticsIMETSInFlowL2ProtocolList in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDGroupID | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object is the read-only version of the opticsIMETSInFlowGroupID in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDClassificationMode | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.14 | OpticsIMETSclassMode | RO | |
column · OpticsIMETSclassMode · read-only · current This object is read-only version of the opticsIMETSInFlowClassificationMode in the opticsIMETSInFlowTable | ||||
| CopticsIMETSInFlowServiceIDUseDEI | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current This object is the read-only version of the opticsIMETSInFlowUseDEI in the opticsIMETSInFlowTable. | ||||
| CopticsIMETSInFlowServiceIDControlWord | 1.3.6.1.4.1.637.54.1.25.3.1.11.1.16 | TruthValue | RO | |
column · TruthValue · read-only · current This object is the read-only version of the opticsIMETSInFlowControlWord in the opticsIMETSInFlowTable. | ||||
| TopticsIMETSOutFlowServerIDTable | 1.3.6.1.4.1.637.54.1.25.3.1.12 | NA | ||
table · not-accessible · current This table is a read-only version of the opticsIMETSOutFlowTable. It is ordered by ServerID and OutFlow. An entry is created, in this table, automatically by the agent, when an entry is activated by the manager in the opticsIMETSOutFlowTable with opticsIMETSOutFlowRowStatus equal to 'active'. An entry is deleted, in this table, automatically by the agent, when an entry is deactivated or deleted by the manager in the opticsIMETSOutFlowTable with opticsIMETSInFlowRowStatus equal to 'destroy' or 'notInService'. | ||||
| RopticsIMETSOutFlowServerIDEntry | 1.3.6.1.4.1.637.54.1.25.3.1.12.1 | NA | ||
row · not-accessible · current An entry of opticsIMETSOutFlowServerIDTable. | ||||
| CopticsIMETSOutFlowServerIDServerTypeIndex | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.1 | OpticsIMETSOutFlowServerType | NA | |
column · OpticsIMETSOutFlowServerType · not-accessible · current The value of this object is equal to opticsIMETSOutFlowServerType in the opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDServerIDIndex | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.2 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current The value of this object is equal to opticsIMETSOutFlowServiceID value of opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDOutFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.3 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSOutFlowIndex value of opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.4 | OpticsIMUserLabel | RO | |
column · OpticsIMUserLabel · read-only · current This object is the read-only version of the opticsIMETSOutFlowUserLabel in the opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDCrossConnectIdentifier | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.5 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This object is the read-only version of the opticsIMETSOutFlowCrossConnectIdentifier in the opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDVlanStackPointer | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.6 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current This object is the read-only version of the opticsIMETSOutFlowVlanStackPointer in the opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDControlWord | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current This object is the read-only version of the opticsIMETSOutFlowCrossControlWord in the opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDAtmVpiOut | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.8 | Unsigned32 (0..4096) | RO | |
column · Unsigned32 (0..4096) · read-only · current This object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmVpiOut in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDAtmVciOut | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.9 | Unsigned32 (0..65536) | RO | |
column · Unsigned32 (0..65536) · read-only · current This object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmVciOut in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable. | ||||
| CopticsIMETSOutFlowServerIDAtmConcGroupNumber | 1.3.6.1.4.1.637.54.1.25.3.1.12.1.10 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This object, applicable to ATM Flow, is the read-only version of the opticsIMETSOutFlowAtmConcGroupNumber in the opticsIMETSOutFlowAtmTable AUGMENT of opticsIMETSOutFlowTable. | ||||
| SopticsIMETSVlanStackConfIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.13 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSVlanStackConfIndex when creating entries in the opticsIMETSVlanStackConfTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSVlanStackConfIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index. | ||||
| TopticsIMETSVlanStackConfTable | 1.3.6.1.4.1.637.54.1.25.3.1.14 | NA | ||
table · not-accessible · current The opticsIMETSVlanStackConfOutFlowIndex and the opticsIMETSVlanStackConfVlanIndex are used as indexes. The manager creates an entry in this table for each OutFlow with VLAN Push operation enabled. One or more entries are created in this table by the manager for each OutFlow in opticsIMETSOutFlowTable. | ||||
| RopticsIMETSVlanStackConfEntry | 1.3.6.1.4.1.637.54.1.25.3.1.14.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSVlanStackConfTable. | ||||
| CopticsIMETSVlanStackConfIndex | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A unique value to identify the VLAN Stack Configuration. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSVlanStackConfIndexNext. The range is 1..MAXVlanStackConf, where MAXVlanStackConf is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSVlanStackConfVlanIndex | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.2 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A value to identify the VLAN number. The range is 1..3. | ||||
| CopticsIMETSVlanStackConfVlanID | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.3 | OpticsIMETSVlanCfg | RC | |
column · OpticsIMETSVlanCfg · read-create · current This object defines the VLAN value to be set for VLAN tag to be pushed. The range is 0..4095. The default value is 0. | ||||
| CopticsIMETSVlanStackConfPriorityMode | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.4 | OpticsIMPriorityMode | RC | |
column · OpticsIMPriorityMode · read-create · current This object represents the way by which priority bits of VLAN tag have to be managed, by opticsIMETSVlanStackConfPriority and opticsIMETSVlanStackConfPriorityYellow. The default value is 'colorBlind'. | ||||
| CopticsIMETSVlanStackConfPriority | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.5 | OpticsmIMETSPriority | RC | |
column · OpticsmIMETSPriority · read-create · current This object defines value of the priority bits to be set in VLAN tag to be pushed. In the 'colorBlind' mode, it is the value to be set for all outgoing frames in the flow. In the 'colorAware' mode, it is the value to be set only for green frames. The range is 'pri000(0)'..'pri111(7)'. The default value is 0. | ||||
| CopticsIMETSVlanStackConfPriorityYellow | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.6 | OpticsmIMETSPriority | RC | |
column · OpticsmIMETSPriority · read-create · current This object defines value of the priority bits to be set in VLAN tag to be pushed. It is the value to be set for yellow frames in the flow. The value of this object is meaningful only if the mode is 'colorAware'. The range is 'pri000(0)'..'pri111(7)'. The default value is 0. | ||||
| CopticsIMETSVlanStackConfRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Enable creating, deleting and modifying this row. | ||||
| CopticsIMETSVlanStackConfUseDEI | 1.3.6.1.4.1.637.54.1.25.3.1.14.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This object contains information about DEI Use (Default value: false)
on outgoing S-Tagged frames. It is the value to be set for yellow frames in the flow.
The value of this object is meaningful only if the mode
is 'colorAware'. | ||||
| SopticsIMETSColorProfileIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.15 | Unsigned32 (0..256) | RO | |
scalar · Unsigned32 (0..256) · read-only · current This object contains an appropriate value to be used for opticsIMETSColorProfileIndex when creating entries in the opticsIMETSColorProfileTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSColorProfileIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index. | ||||
| TopticsIMETSColorProfileTable | 1.3.6.1.4.1.637.54.1.25.3.1.16 | NA | ||
table · not-accessible · current This table contains information about ETS Color Profiles either referred to Priority bits or to IP-Dscp bits. | ||||
| RopticsIMETSColorProfileEntry | 1.3.6.1.4.1.637.54.1.25.3.1.16.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSColorProfileTable. | ||||
| CopticsIMETSColorProfileIndex | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A unique value to identify the color profile. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSColorProfileIndexNext. The range is 1..MAXColorProfile, where MAXColorProfile is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSColorProfilePriority0 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.2 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 0. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority1 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.3 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 1. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority2 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.4 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 2. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority3 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.5 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 3. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority4 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.6 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 4. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority5 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.7 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 5. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority6 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.8 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 6. The default value is 'green'. | ||||
| CopticsIMETSColorProfilePriority7 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.9 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming tagged frames with priority bits equal to 7. The default value is 'green'. | ||||
| CopticsIMETSColorProfileUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.10 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The canonical user label assigned to the Color Profile. | ||||
| CopticsIMETSColorProfileRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| CopticsIMETSColorProfileMode | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.12 | OpticsIMETSclassMode | RC | |
column · OpticsIMETSclassMode · read-create · current This object is used to select the type of color profile set on incoming frames: either by priority bits or by Ip Dscp bits. The default value is priority(0). | ||||
| CopticsIMETSColorProfileDscp0 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.13 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000000. The default value is yellow. | ||||
| CopticsIMETSColorProfileDscp1 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.14 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp2 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.15 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000010. The default value is green. | ||||
| CopticsIMETSColorProfileDscp3 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.16 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp4 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.17 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000100. The default value is green. | ||||
| CopticsIMETSColorProfileDscp5 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.18 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp6 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.19 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp7 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.20 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 000111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp8 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.21 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp9 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.22 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp10 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.23 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001010. The default value is red. | ||||
| CopticsIMETSColorProfileDscp11 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.24 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp12 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.25 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001100. The default value is yellow. | ||||
| CopticsIMETSColorProfileDscp13 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.26 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp14 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.27 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp15 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.28 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 001111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp16 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.29 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp17 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.30 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp18 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.31 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010010. The default value is red. | ||||
| CopticsIMETSColorProfileDscp19 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.32 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp20 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.33 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010100. The default value is yellow. | ||||
| CopticsIMETSColorProfileDscp21 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.34 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp22 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.35 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp23 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.36 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 010111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp24 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.37 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp25 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.38 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp26 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.39 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011010. The default value is red. | ||||
| CopticsIMETSColorProfileDscp27 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.40 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp28 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.41 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011100. The default value is yellow. | ||||
| CopticsIMETSColorProfileDscp29 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.42 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp30 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.43 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp31 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.44 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 011111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp32 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.45 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp33 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.46 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp34 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.47 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100010. The default value is red. | ||||
| CopticsIMETSColorProfileDscp35 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.48 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp36 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.49 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100100. The default value is yellow. | ||||
| CopticsIMETSColorProfileDscp37 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.50 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp38 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.51 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp39 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.52 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 100111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp40 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.53 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp41 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.54 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp42 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.55 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101010. The default value is green. | ||||
| CopticsIMETSColorProfileDscp43 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.56 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp44 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.57 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101100. The default value is green. | ||||
| CopticsIMETSColorProfileDscp45 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.58 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101101 The default value is green. | ||||
| CopticsIMETSColorProfileDscp46 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.59 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp47 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.60 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 101111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp48 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.61 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp49 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.62 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp50 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.63 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110010. The default value is green. | ||||
| CopticsIMETSColorProfileDscp51 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.64 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp52 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.65 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110100. The default value is green. | ||||
| CopticsIMETSColorProfileDscp53 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.66 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp54 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.67 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp55 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.68 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 110111. The default value is green. | ||||
| CopticsIMETSColorProfileDscp56 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.69 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111000. The default value is green. | ||||
| CopticsIMETSColorProfileDscp57 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.70 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111001. The default value is green. | ||||
| CopticsIMETSColorProfileDscp58 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.71 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111010. The default value is green. | ||||
| CopticsIMETSColorProfileDscp59 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.72 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111011. The default value is green. | ||||
| CopticsIMETSColorProfileDscp60 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.73 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111100. The default value is green. | ||||
| CopticsIMETSColorProfileDscp61 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.74 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111101. The default value is green. | ||||
| CopticsIMETSColorProfileDscp62 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.75 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111110. The default value is green. | ||||
| CopticsIMETSColorProfileDscp63 | 1.3.6.1.4.1.637.54.1.25.3.1.16.1.76 | OpticsIMColorType | RC | |
column · OpticsIMColorType · read-create · current Set by the operator to indicate drop precedence value for the incoming frames with Ip Dscp bits equal to 111111. The default value is 'green'. | ||||
| SopticsIMETSFlowGroupIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.17 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMETSFlowGroupIndex when creating entries in the opticsIMETSFlowGroupTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMETSFlowGroupIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. | ||||
| TopticsIMETSFlowGroupTable | 1.3.6.1.4.1.637.54.1.25.3.1.18 | NA | ||
table · not-accessible · current This table contains information about ETS Flow Group configuration. | ||||
| RopticsIMETSFlowGroupEntry | 1.3.6.1.4.1.637.54.1.25.3.1.18.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSFlowGroupTable. The ifIndex represents the Ethernet interface with client type='ets' associated with all the flows belonging to the group (i.e. all the flows belonging to this group must have the opticsIMETSInFlowServiceID equal to ifIndex). In any case the opticsIMETSFlowGroupIndex should be a globally unique index. | ||||
| CopticsIMETSFlowGroupIndex | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A unique value to identify the ETS Flow Group. When creating a new row in the table, the value of this index may be obtained by retrieving the value of opticsIMETSFlowGroupIndex. The range is 1..MAXFlowGroup, where MAXFlowGroup is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMETSFlowGroupPolicingMode | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.2 | OpticsIMETSPolicingMode | RC | |
column · OpticsIMETSPolicingMode · read-create · current It defines the Policing Mode. By default, policing is 'colorBlind'. | ||||
| CopticsIMETSFlowGroupTrafficDescrIndex | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.3 | OpticsIMETSTrafficDescrIndex | RC | |
column · OpticsIMETSTrafficDescrIndex · read-create · current It identifies the row in the opticsIMETSTrafficDescrTable which applies to the ETS flow group, both in input and output direction. | ||||
| CopticsIMETSFlowGroupUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.4 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The canonical user label assigned to the flow group. | ||||
| CopticsIMETSFlowGroupRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| CopticsIMETSFlowGroupColorProfilePointer | 1.3.6.1.4.1.637.54.1.25.3.1.18.1.6 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current This object points to a row in the opticsIMColorProfileTable. It defines the Color Profile associated with priority bits in the 'colorAware' mode. A value of 0 indicates that no Color Profile has been associated with this Flow Group and then the 'colorBlind' mode is used. The default value is 0. | ||||
| TopticsIMETSCrossConnectServiceTypeTable | 1.3.6.1.4.1.637.54.1.25.3.1.19 | NA | ||
table · not-accessible · current This table is read-only version of ETS Cross Connect table. It is organized by service Type and it contains useful data for the manager | ||||
| RopticsIMETSCrossConnectServiceTypeEntry | 1.3.6.1.4.1.637.54.1.25.3.1.19.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSCrossConnectServiceTypeTable. | ||||
| CopticsIMETSCrossConnectServiceTypeIndex | 1.3.6.1.4.1.637.54.1.25.3.1.19.1.1 | OpticsIMETSFlowServiceType | NA | |
column · OpticsIMETSFlowServiceType · not-accessible · current The value of this object is equal to the Flow Service Type: value specified opticsIMETSInFlowServiceType of the opticsIMETSInFlowTable or opticsIMETSOutFlowServiceType of opticsIMETSOutFlowTable. The rule is the following one: if one of two Flow legs has the value of service type different from Ethernet, this value is assigned to opticsIMETSCrossConnectServiceTypeIndex. In case of atm service or pw on atm, atm service type is identified. In case of circuit emulation (ces, ces on provider bridge, ces on pw), the service type value (ces-pw or ces-pb) is identified | ||||
| CopticsIMETSCrossConnectServiceTypeInFlowUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.19.1.2 | OpticsIMUserLabel | RO | |
column · OpticsIMUserLabel · read-only · current The canonical user label assigned to the Inflow. This attribute value is equal to opticsIMETSInFlowUserLabel of opticsIMETSInFlowTable | ||||
| CopticsIMETSCrossConnectServiceTypeInFlowServiceID | 1.3.6.1.4.1.637.54.1.25.3.1.19.1.3 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value service type
dependent.
This attribute value is equal to opticsIMETSInFlowServiceID
of opticsIMETSInFlowTable | ||||
| CopticsIMETSCrossConnectServiceTypeOutFlowUserLabel | 1.3.6.1.4.1.637.54.1.25.3.1.19.1.4 | OpticsIMUserLabel | RO | |
column · OpticsIMUserLabel · read-only · current The canonical user label assigned to the Outflow. This attribute value is equal to opticsIMETSOutFlowUserLabel of opticsIMETSOutFlowTable | ||||
| CopticsIMETSCrossConnectServiceTypeOutFlowServerID | 1.3.6.1.4.1.637.54.1.25.3.1.19.1.5 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value service type
dependent.
This attribute value is equal to opticsIMETSOutFlowServerID
of opticsIMETSOutFlowTable | ||||
| SopticsIMATMCellConcGroupIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.20 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This object contains an appropriate value to be used for opticsIMATMCellConcGroupIndex when creating entries in the opticsIMATMCellConcGroupTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMATMCellConcGroupIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to reflect the next unassigned index. | ||||
| TopticsIMATMCellConcGroupTable | 1.3.6.1.4.1.637.54.1.25.3.1.21 | NA | ||
table · not-accessible · current This table contains configurations for the CellConcGroup | ||||
| RopticsIMATMCellConcGroupEntry | 1.3.6.1.4.1.637.54.1.25.3.1.21.1 | NA | ||
row · not-accessible · current An entry of the opticsIMATMCellConcGroupTable. | ||||
| CopticsIMATMCellConcGroupIndex | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current A unique value to identify the CONC_GROUP. The range is 1..65535. | ||||
| CopticsIMATMCellConcGroupMaxConcCells | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Max number of Concatenated Cells in a CONC_GROUP The range is 1..32. The default value is 16. | ||||
| CopticsIMATMCellConcGroupTimeOut | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Timeout for the generation of a MPLS packet containing concatenated ATM cells. The range is 1..100. The default value is 50. | ||||
| CopticsIMATMCellConcGroupCLPTrigger | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current This object indicate if the CLP (Cell Loss Priority) bit changing in the ATM cells is used (true) or not (false) as trigger for the generation of the MPLS packet containing concatenated ATM cells. The default value is false? | ||||
| CopticsIMATMCellConcGroupCoS | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.5 | OpticsIMETSTrafficDescrType | RO | |
column · OpticsIMETSTrafficDescrType · read-only · current CoS of all the ATM Flow in the CONC_GROUP. | ||||
| CopticsIMATMCellConcGroupRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.21.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current For creating, modifying, and deleting this row. | ||||
| SopticsIMATM2ETSFlowClassifierIndexNext | 1.3.6.1.4.1.637.54.1.25.3.1.22 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This object contains an appropriate value to be used for opticsIMATM2ETSFlowClassifierIndex when creating entries in the opticsIMATM2ETSFlowClassifierTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMATM2ETSFlowClassifierIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to replect the next unassigned index. | ||||
| TopticsIMATM2ETSFlowClassifierTable | 1.3.6.1.4.1.637.54.1.25.3.1.23 | NA | ||
table · not-accessible · current This table provides ATM configuration for each ATM ingress flow. This table is indexed by the same index that was created for the associated entry of the opticsIMETSInFlowTable. The opticsIMETSInFlowIndex and the opticsIMATM2ETSFlowClassifierIndex are used as indexes. One or more entries are created in this table by the manager only if there is an antry in the opticsIMETSInFlowTable with an opticsIMETSInFlowServiceType equal to 'ATM' or PW-ATM? | ||||
| RopticsIMATM2ETSFlowClassifierEntry | 1.3.6.1.4.1.637.54.1.25.3.1.23.1 | NA | ||
row · not-accessible · current An entry of the opticsIMATM2ETSFlowClassifierTable. | ||||
| CopticsIMATM2ETSFlowClassifierInFlowIndex | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.1 | OpticsIMETSFlowIndex | NA | |
column · OpticsIMETSFlowIndex · not-accessible · current The value of this object is equal to opticsIMETSInFlowIndex value of opticsIMETSInFlowTable. | ||||
| CopticsIMATM2ETSFlowClassifierIndex | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.2 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current A unique value to identify this Flow Classifier. The range is 1..MAXFlowClassifier, where MAXFlowClassifier is product dependent and it will be specified in the product specification document. | ||||
| CopticsIMATM2ETSFlowClassifierVpi | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.3 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current This object defines ATM VPI on the ETS flow. The default value is 4096. | ||||
| CopticsIMATM2ETSFlowClassifierMaxVpi | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.4 | Unsigned32 (0..4095) | RW | |
column · Unsigned32 (0..4095) · read-write · current This object is used to define the MAX value of ATM VPI range for this ETS ingress flow and must be greater than opticsIMATM2ETSFlowClassifierVpi. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMATM2ETSFlowClassifierVci | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.5 | Unsigned32 (0..65536) | RW | |
column · Unsigned32 (0..65536) · read-write · current This object defines ATM VCI on the ETS flow. The default value is 65536. | ||||
| CopticsIMATM2ETSFlowClassifierMaxVci | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.6 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object is used to define the MAX value of ATM VCI range for this ETS ingress flow and must be greater than opticsIMATM2ETSFlowClassifierVci. If a range is not used the value must be set to 0. The default value is 0. | ||||
| CopticsIMATM2ETSFlowClassifierRowStatus | 1.3.6.1.4.1.637.54.1.25.3.1.23.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Enable creating, deleting and modifying this row. | ||||
| TopticsIMETSOutFlowAtmTable | 1.3.6.1.4.1.637.54.1.25.3.1.24 | NA | ||
table · not-accessible · current This table contains information about ATM ETS egress flow. | ||||
| RopticsIMETSOutFlowAtmEntry | 1.3.6.1.4.1.637.54.1.25.3.1.24.1 | NA | ||
row · not-accessible · current An entry of the opticsIMETSOutFlowAtmTable.
| ||||
| CopticsIMETSOutFlowAtmVpiOut | 1.3.6.1.4.1.637.54.1.25.3.1.24.1.1 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current This object is used to define the Vpi in output (to be included in the PW-ATM or at egress in the ATM port). If the value is 4096 (out of range) the value of the Vpi is not changed. The default value is 4096. | ||||
| CopticsIMETSOutFlowAtmVciOut | 1.3.6.1.4.1.637.54.1.25.3.1.24.1.2 | Unsigned32 (0..65536) | RW | |
column · Unsigned32 (0..65536) · read-write · current This object is used to define the Vci in output (to be included in the PW-ATM or at egress in the ATM port). If the value is 65536 (out of range) the value of the Vci is not changed. The default value is 65536 | ||||
| CopticsIMETSOutFlowAtmConcGroupNumber | 1.3.6.1.4.1.637.54.1.25.3.1.24.1.3 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This object is used to define the number of the CONC-GROUP the OutFlow belongs to. If 0 the Outflow is not concatenated. The default value is 0 | ||||
| NopticsimETSMCConf | 1.3.6.1.4.1.637.54.1.25.99.3 | |||
| NopticsimETSMCCompl | 1.3.6.1.4.1.637.54.1.25.99.3.1 | |||
| NopticsimETSMCGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2 | |||
| GopticsIMETSTrafficDescrGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.1 | |||
group · current Collection of objects of opticsIMETSTrafficDescrTable. | ||||
| GopticsIMETSInFlowGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.2 | |||
group · current Collection of objects of opticsIMETSInFlowTable.
| ||||
| GopticsIMETSOutFlowGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.3 | |||
group · current Collection of objects of opticsIMETSOutFlowTable. | ||||
| GopticsIMETSCrossConnectGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.4 | |||
group · current Collection of objects of opticsIMETSCrossCopnnectTable. | ||||
| GopticsIMEth2ETSFlowClassifierGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.5 | |||
group · current Collection of objects of opticsIMEth2ETSFlowClassifierTable.
| ||||
| GopticsIMETSInFlowServiceIDGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.6 | |||
group · current Collection of objects of opticsIMETSInFlowServiceIDTable.
| ||||
| GopticsIMETSOutFlowServerIDGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.7 | |||
group · current Collection of objects of opticsIMETSOutFlowServiceIDTable. | ||||
| GopticsIMETSVlanStackConfGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.8 | |||
group · current Collection of objects of opticsIMETSVlanStackConfTable. | ||||
| GopticsIMETSColorProfileGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.9 | |||
group · current Collection of objects of opticsIMETSColorProfileTable.
| ||||
| GopticsIMETSGroupFlowGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.10 | |||
group · current Collection of objects of opticsIMETSFlowGroup. | ||||
| GopticsIMETSCrossConnectServiceTypeGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.11 | |||
group · current Collection of objects of opticsIMETSCrossConnectServiceTypeTable. | ||||
| GopticsIMATMCellConcGroupGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.12 | |||
group · current Collection of objects of opticsIMATMCellConcGroupTable. | ||||
| GopticsIMATM2ETSFlowClassifierGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.13 | |||
group · current Collection of objects of opticsIMATM2ETSFlowClassifierTable. | ||||
| GopticsIMETSOutFlowAtmGroup | 1.3.6.1.4.1.637.54.1.25.99.3.2.14 | |||
group · current Collection of objects of the opticsIMETSOutFlowAtmTable. | ||||
Textual conventions
OpticsIMColorTypeINTEGERgreen(1)red(3)yellow(2)This TC is used for define a color to be associated with incoming frames.
OpticsIMETSFlowIndexUnsigned32 (1..2147483647)Ingress Flow Index. Locally unique index for indexing several MIB tables associated with a particular flow.
OpticsIMETSFlowServiceTypeINTEGERatm(6)ces(9)ces-pb(10)ces-pw(11)ethernet(1)mpls(2)other(0)pbb(7)providerBridge(3)pw(4)pw-atm(8)vpls(5)It indicates the server type on which this flow will be carried.
OpticsIMETSFlowTypeINTEGERmulticastOptionA(2)multicastOptionB(3)unicastAutolearning(1)unicastNoAutolearning(0)It indicates the flow type.
OpticsIMETSInFlowServiceTypeINTEGERatm(6)ces(9)ces-pb(10)ces-pw(11)ethernet(1)mpls(2)other(0)pbb(7)providerBridge(3)pw(4)pw-atm(8)vpls(5)It indicates the service type (i.e. the carried service).
OpticsIMETSIpDscpINTEGERdontCare(65)dscp000000(0)dscp000001(1)dscp000010(2)dscp000011(3)dscp000100(4)dscp000101(5)dscp000110(6)dscp000111(7)dscp001000(8)dscp001001(9)dscp001010(10)dscp001011(11)dscp001100(12)dscp001101(13)dscp001110(14)dscp001111(15)dscp010000(16)dscp010001(17)dscp010010(18)dscp010011(19)dscp010100(20)dscp010101(21)dscp010110(22)dscp010111(23)dscp011000(24)dscp011001(25)dscp011010(26)dscp011011(27)dscp011100(28)dscp011101(29)dscp011110(30)dscp011111(31)dscp100000(32)dscp100001(33)dscp100010(34)dscp100011(35)dscp100100(36)dscp100101(37)dscp100110(38)dscp100111(39)dscp101000(40)dscp101001(41)dscp101010(42)dscp101011(43)dscp101100(44)dscp101101(45)dscp101110(46)dscp101111(47)dscp110000(48)dscp110001(49)dscp110010(50)dscp110011(51)dscp110100(52)dscp110101(53)dscp110110(54)dscp110111(55)dscp111000(56)dscp111001(57)dscp111010(58)dscp111011(59)dscp111100(60)dscp111101(61)dscp111110(62)dscp111111(63)notIpPacket(64)This TC defines the groups of user IP DSCP values mapped into this flow. Each bit set indicates that this IP DSCP is assigned to this flow. The value 'notIpPacket' is used to indicate that ethernet frames not encapsulating Ip packet are also associated to this flow. The value 'dontCare' is used to indicate that the IP DSCP field is not relevant, both if valued and if not present.
OpticsIMETSOutFlowServerTypeINTEGERatm(6)ces(9)ces-pb(10)ces-pw(11)ethernet(1)mpls(2)other(0)pbb(7)providerBridge(3)pw(4)pw-atm(8)vpls(5)It indicates the server type on which this flow will be carried.
OpticsIMETSPolicingModeINTEGERcolorAware(3)colorAwareNoCoupling(4)colorAwareWithCoupling(5)colorBlind(1)disabled(2)The value of this object defines the ETS Policing Mode.
OpticsIMETSTrafficDescrIndexUnsigned32 (1..2147483647)The value of this object identifies a row in the opticsIMETSTrafficDescrTable.
OpticsIMETSTrafficDescrTypeINTEGERanyServiceClass(10)backGroundService(5)bestEffortService(1)grouped(4)guaranteedService(3)guaranteedService2(9)regulatedService(2)regulatedService1(8)regulatedService3(7)regulatedService4(6)The value of this object identifies the type of the ETS Traffic Descriptor. The use of the parameter vector is the following: - Parameter 1 : CIR (Committed Information Rate) in Kbits/sec - Parameter 2 : PIR (Peak Information Rate) in Kbits/sec - Parameter 3 : CBS (Committed Burst Size) in bytes. - Parameter 4 : PBS (Peak Burst Size) in bytes. The bestEffortService value is intended to allow the client to implement the Best Effort Service (BES): low priority traffic with no guarantee not on bandwidth nor on delay. The regulatedService value is intended to allow the client to implement the Regulated Service (RS): guaranteed minimum bandwidth, excess bandwidth as low priority, not-guaranteed delay. The guaranteedService value is intended to allow the client to implemented the Guaranteed Service (GS): high priority traffic with guaranteed bandwidth, bounded (low) delay and low jitter. The grouped value is intended to allow the defining bandwidth profile for ETS Flow Groups.OpticsIMETSVlanCfgUnsigned32 (0..4097)VLAN configuration for Ethernet Service. Values between 0 to 4095 indicate the actual VLAN field value. A value of 4096 indicates that the object refer to untagged frames, i.e. frames without 802.1Q field. A value of 4097 indicates that the VLAN field is not relevant, both if valued and if not present.
OpticsIMETSclassModeInteger32This TC defines the type of classification on incoming frames: either by priority bits or by Ip Dscp bits. The value 0 represents classification based on priority bits. The value 1 represents classification based on DSCP field. Other values are reserved for future use. The default value is 0.
OpticsIMLayer2ProtocolListBitsbridgeManagement(16)customerBPDU(1)customerGMRP(17)customerGVRP(18)data(0)mefgarpreserved1(34)mefgarpreserved10(43)mefgarpreserved11(44)mefgarpreserved12(45)mefgarpreserved13(46)mefgarpreserved14(47)mefgarpreserved15(48)mefgarpreserved16(49)mefgarpreserved2(35)mefgarpreserved3(36)mefgarpreserved4(37)mefgarpreserved5(38)mefgarpreserved6(39)mefgarpreserved7(40)mefgarpreserved8(41)mefgarpreserved9(42)pae-8021x(4)providerBPDU(2)providerGVRP(13)reserved1(5)reserved10(15)reserved11(19)reserved12(20)reserved13(21)reserved14(22)reserved15(23)reserved16(24)reserved17(25)reserved18(26)reserved19(27)reserved2(6)reserved20(28)reserved21(29)reserved22(30)reserved23(31)reserved24(32)reserved3(7)reserved4(8)reserved5(9)reserved6(10)reserved7(11)reserved8(12)reserved9(14)slowProtocols(3)vrrp(33)Each Layer 2 Control Protocol is represented by a single bit within the value of this object. The bit 0 represents data frames. Only the first 50 bits are defined (from 0 to 49); the remaining bits (from 50 to 63) have not been defined yet. --- Only the first 33 bits are defined --- (from 0 to 32); the remaining bits (from 33 to 63) --- have not been defined yet. Following the list of the actual managed frame types: 1) bit 0: data frames 2) bit 1: Customer BPDU 3) bit 2: Provider BPDU 4) bit 3: Slow Protocols 5) bit 4: 802.1X PAE 6) bit 5: Reserved (MAC applications) 7) bit 6: Reserved (MAC applications) 8) bit 7: Reserved (bridge operations) 9) bit 8: Reserved (bridge operations) 10) bit 9: Reserved (bridge operations) 11) bit 10: Reserved (bridge operations) 12) bit 11: Reserved (Provider bridge operations) 13) bit 12: Reserved (Provider bridge operations) 14) bit 13: Provider GVRP 15) bit 14: Reserved (Customer bridge operations) 16) bit 15: Reserved (Customer bridge operations) 17) bit 16: Bridge Management 18) bit 17: Customer GMRP 19) bit 18: Customer GVRP 20) bit 19: Reserved (GARP applications) 21) bit 20: Reserved (GARP applications) 22) bit 21: Reserved (GARP applications) 23) bit 22: Reserved (GARP applications) 24) bit 23: Reserved (GARP applications) 25) bit 24: Reserved (GARP applications) 26) bit 25: Reserved (GARP applications) 27) bit 26: Reserved (GARP applications) 28) bit 27: Reserved (GARP applications) 29) bit 28: Reserved (GARP applications) 30) bit 29: Reserved (GARP applications) 31) bit 30: Reserved (GARP applications) 32) bit 31: Reserved (GARP applications) 33) bit 32: Reserved (GARP applications) 34) bit 33: Reserved MAC Destination Address for VRRP 35) bit 34: Reserved (MEF GARP applications) 36) bit 35: Reserved (MEF GARP applications) 37) bit 36: Reserved (MEF GARP applications) 38) bit 37: Reserved (MEF GARP applications) 39) bit 38: Reserved (MEF GARP applications) 40) bit 39: Reserved (MEF GARP applications) 41) bit 40: Reserved (MEF GARP applications) 42) bit 41: Reserved (MEF GARP applications) 43) bit 42: Reserved (MEF GARP applications) 44) bit 43: Reserved (MEF GARP applications) 45) bit 44: Reserved (MEF GARP applications) 46) bit 45: Reserved (MEF GARP applications) 47) bit 46: Reserved (MEF GARP applications) 48) bit 47: Reserved (MEF GARP applications) 49) bit 48: Reserved (MEF GARP applications) 50) bit 49: Reserved (MEF GARP applications)OpticsIMPriorityModeINTEGERcolorAware(2)colorBlind(1)This TC defines the way to interpret the priority bits.
OpticsIMVlanConfigurationINTEGERdisabled(2)enabled(1)This TC is used for enable and disable the VLAN Pop and Push operations.
OpticsmIMETSPriorityINTEGERdontCare(9)preservePriorityFromIngress(10)preserveTDPriority(11)pri000(0)pri001(1)pri010(2)pri011(3)pri100(4)pri101(5)pri110(6)pri111(7)untagged(8)This TC defines the groups of user PRI mapped into this flow. Each bit set indicates that this user priority is assigned to this flow. The value 'untagged' is used to indicate that untagged frames are also associated to this flow. The value 'dontCare' is used to indicate that the Priority field is not relevant, both if valued and if not present. The value 'preserveFromIngress' is used to indicate that the Priority field in the pushed VLAN at the egress must be same as ingress.
Groups and compliance
- opticsIMATM2ETSFlowClassifierGroup
- opticsIMATMCellConcGroupGroup
- opticsIMETSColorProfileGroup
- opticsIMETSCrossConnectGroup
- opticsIMETSCrossConnectServiceTypeGroup
- opticsIMETSGroupFlowGroup
- opticsIMETSInFlowGroup
- opticsIMETSInFlowServiceIDGroup
- opticsIMETSOutFlowAtmGroup
- opticsIMETSOutFlowGroup
- opticsIMETSOutFlowServerIDGroup
- opticsIMETSTrafficDescrGroup
- opticsIMETSVlanStackConfGroup
- opticsIMEth2ETSFlowClassifierGroup