OPTICSIM-ETHNE-MIB
Nokia (formerly 'Alcatel-Lucent')Optics-IM Ethernet NE MIB
snmptranslate -m OPTICSIM-ETHNE-MIB -Tpsnmpwalk -v2c -c <community> -m OPTICSIM-ETHNE-MIB <host> 1.3.6.1.4.1.637.54.1.25.2Imports
| IF-MIB | InterfaceIndexOrZero, ifIndex |
|---|---|
| MAU-MIB | ifMauIfIndex, ifMauIndex |
| OPTICSIM-ETHREG-MIB | opticsimEthMC, opticsimEthMib |
| OpticsIMETS-MIB | OpticsIMETSIpDscp, OpticsIMETSVlanCfg, OpticsIMLayer2ProtocolList |
| RFC1155-SMI | Gauge32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | AutonomousType, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TSDIM-SNMP-TC | OpticsIMUserLabel |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IopticsimEthNEMib | 1.3.6.1.4.1.637.54.1.25.2 | |||
identity Optics-IM Ethernet NE MIB | ||||
| NopticsimEthNEMibObject | 1.3.6.1.4.1.637.54.1.25.2.1 | |||
| TopticsIMEthConfTable | 1.3.6.1.4.1.637.54.1.25.2.1.1 | NA | ||
table · not-accessible · current This media-specific interface table is used to define the proprietary configuration parameters for the Ethernet interfaces. | ||||
| RopticsIMEthConfEntry | 1.3.6.1.4.1.637.54.1.25.2.1.1.1 | NA | ||
row · not-accessible · current
| ||||
| CopticsIMEthMauIndex | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current This attribute contains the number of the MAU port that is associated to an internal interface at MAU creation time. This object must be 0 if the interface has not a 'Mau' Underlie Layer. | ||||
| CopticsIMEthJackIndex | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current This attribute contains the number of the MAU connector that is associated to a MAU port at MAU and hence to an internal interface at MAU creation time. This object must be 0 if the interface has not a 'Mau' Underlie Layer. | ||||
| CopticsIMEthConfEncaps | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The encapsulation method used by the local Ethernet entity.
| ||||
| CopticsIMEthAvailableBandwidth | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.4 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in ifSpeed (converted in Kbps). When this value cannot be measured, this value should contain the nominal bandwidth. | ||||
| CopticsIMEthConfVLANEtherType | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.5 | Unsigned32 (0..2147483647) | RW | |
column · Unsigned32 (0..2147483647) · read-write · current This object points to an entry in the opticsIMEthVLANTypeTable that represents the EtherType value used to detect VLAN tagged frames received from this interface as well as to insert VLAN tag(s) to the frames to be transmitted (when applicable). The value 0 is reserved to represent the IEEE 802.1Q standard EtherType (i.e. 0x8100). The default value is 0 (IEEE 802.1Q standard EtherType). The value of this object is meaningless for MAC bridge (IEEE 802.1D) ports. The value of this object MUST be equal to 0 for Virtual bridge (IEEE 802.1Q) ports. The value of this object MUST be the same for all Provider bridge (pre-IEEE 802.1ad) ports. | ||||
| CopticsIMEthFCSDiscardErroredFrames | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current If this object is set to TRUE, the incoming errored Ethernet frames are discarded, if it is set to FALSE the incoming errored Ethernet frames are forwarded as the correct ones. | ||||
| CopticsIMEthDefaultPause | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the default administrative PAUSE type. When the underlying layer is mau, this object represent the administratively-configured type of Flow Control operations supported by the Ethernet port. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the Flow Control. In this case, a set to this object will force the Flow Control into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the Flow Control is determined by the auto-negotiation, and the value of this object denotes the type to which the Flow Control will automatically revert if/when auto-negotiation is later disabled. When the underlying layer is not mau, this object can be set only to the disabled (0) value.
| ||||
| CopticsIMEthClientType | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current It is used to determine the transmission direction of the frames received from the Ethernet Port. - ETS (1) the frame will be sent to ETS Layer. - ETB (2) the frame will be sent to Ethernet Switch Layer. - LINKAGG (3) the frame will be sent to Link Aggregation Layer. - ELP (4) the frame will be sent to Link Protection Group. - PNP (5) the frame will be sent to PBB Provider Network Port
| ||||
| CopticsIMEthAdmittedFractionalRate | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current This value indicates the threshold value of admitted bandwidth on this interface and is specified in kilobits per second (Kbps). This value is requested to trigger PAUSE frame generation and is minor or equal to that specified in ifSpeed. | ||||
| CopticsIMEthLayer2ProtocolList | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.10 | OpticsIMLayer2ProtocolList | RW | |
column · OpticsIMLayer2ProtocolList · read-write · current This parameter enables to choose if to tunnel, toward a Provider Network, or filter Layer 2 Control frames. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. Default value is all bits set to 1, so tunneling everything. This parameter is significant only if the opticsIMEthClientType is 'ets'. | ||||
| CopticsIMEthMaclIndex | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current This object value is the pointer to an entry of opticsIMaclMacTable, representing MACL table.By default the value is zero, indicating no pointer to MACL table | ||||
| CopticsIMEthPortProfile | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.12 | PortProfile | RO | |
column · PortProfile · read-only · current The opticsIMEthPortProfile indicates the capabilities and specific or particular behaviour provided by the Ethernet port which managers have to take into account. The default value is the empty string, it means that no peculiarities are present. | ||||
| CopticsIMEthETSServiceType | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current It is used to specify Ethernet Service configuration for an Ethernet Port
with ets as Client Type.
- Other (0) Ethernet Port supports a generic ETS-flow based
Ethernet service with any InFlow Service Type
value and any OutFlow Server Type value
- ETSVirtualSwitch (1) Ethernet Port supports a 2-Ports ETS Virtual
Switch service with Ethernet as unique admitted
InFlow Service Type and unique admitted OutFlow
Server Type
- PortToPort (2) Ethernet Port supports a Port-to-Port Service with
Ethernet as Service Type of unique admitted InFlow
and Ethernet as Server Type of unique admitted
OutFlow.
Default value is Other(0)
| ||||
| CopticsIMEthETSServiceStatus | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.14 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current This attribute reports the actual status of those ETS Service types defined over Ethernet Ports with ets as Client Type. This attribute is meaningless in case of Other as ETS Service type. When opticsIMEthETSServiceType is different from Other, the value of this object is: - 0 if ETS Service Type over this EthernetPort is not yet active; - the ifIndex of the peer ETS Service aware port, if ETS Service Type over that Ethernet Port is active. | ||||
| CopticsIMEthCirOverbookingFactor | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.15 | Unsigned32 (0 | 100..10000) | RW | |
column · Unsigned32 (0 | 100..10000) · read-write · current This attribute defines the overbooking (OB) factor for the CIR BW. The overbooking factor is defined as a percentile. The overbooked CIR BW is calculated as OB CIR BW = (CIR BW * 'opticsIMEthCirOverbookingFactor/ 100). When the value of 'opticsIMEthCirOverbookingFactor' is equal to 100 it means that the OB CIR BW = CIR BW. When the value of 'opticsIMEthCirOverbookingFactor' is equal to 0 it means unlimited overbooking i.e. effectively CoS is set as Best Effort.
| ||||
| CopticsIMEthEirOverbookingFactor | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.16 | Unsigned32 (0 | 100..10000) | RW | |
column · Unsigned32 (0 | 100..10000) · read-write · current This attribute defines the overbooking (OB) factor for the EIR BW. EIR BW is calculated as EIR = PIR BW - CIR BW. The overbooking factor is defined as a percentile. The overbooked EIR BW is calculated as OB EIR BW = (EIR BW * 'opticsIMEthEirOverbookingFactor/ 100). When the value of 'opticsIMEthEirOverbookingFactor' is equal to 100 it means that the OB CIR BW = CIR BW. When the value of 'opticsIMEthEirOverbookingFactor' is equal to 0 it means unlimited overbooking i.e. effectively CoS is set as Best Effort.
| ||||
| CopticsIMEthAutomaticTxShutdown | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.17 | TruthValue | RW | |
column · TruthValue · read-write · current This parameter enable the automatic shutdown of the Tx in case a LOS is detected in Rx. | ||||
| CopticsIMEthWaitForDetection | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.18 | Gauge32 (1..100) | RW | |
column · Gauge32 (1..100) · read-write · current This parameter specifies how long the Tx is maintained down after LOS is detected in Rx; the parameter is expressed in number of 100ms (the admitted WTR range is 100ms - 10s). | ||||
| CopticsIMStormcontrolPointer | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current This object is pointed to opticsIMStormcontrolIndex. By default the value is zero, indicating no pointer to opticsIMStormCtlTable | ||||
| CopticsIMPacketFilteringPointer | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current The index of packet filtering profile. By default the value is zero, indicating no pointer to opticsIMPksFilteringTable | ||||
| CopticsIMEthForcedOutgoingSSM | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates outgoing SSM value for a local Ethernet port. The following values shall be supported: 100: NONE (Disabled Transmission of ESMC Messages) - Default value 0: AUTO (Automatic outgoing SSM value) In case of forced outgoing SSM value - 1: QL-PRC - 2: QL-SSU_A - 3: QL-SSU_B - 4: QL-EEC Option 1 - 5: DNU | ||||
| CopticsIMEthHoldOffMode | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates if for the Ethernet interface, involved on a ERP Topology, it has to be applied the hold off time for the ERP protection.
| ||||
| CopticsIMEthLosEPSSwitchCriteria | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies if the LOS of the Ethernet interface, hosted by a board involved on a Equipment Protection Group, is used as switch criteria.
| ||||
| CopticsIMEthHwFailConsAct | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the behaviour of the Ethernet interface in case the hosted equipment item is in hardware fail condition. In this case the Ethernet interface can try going on trasmitting signal, i.e. holdon (0) value, or shutting down the transmitter, i.e. shutdown (1) value. Default value is holdon (0). This object applies to the physical interface, either optical or electrical.
| ||||
| CopticsIMEthAFRCompensation | 1.3.6.1.4.1.637.54.1.25.2.1.1.1.25 | Integer32 | RW | |
column · Integer32 · read-write · current The data encapsulation of traffic from UNI to MPLS NNI, will be processed by NE to remove or add some overhead according to flow
classification and related policy. Below is key Ethernet data encapsulation used with whole data path from UNI to MPLS NNI:
L1 Ethernet Packet include: Preamble,SFD, L2 Ethernet Frame, IPG. This is typical characteristics at physical Ethernet Interface for UNI.
L2 Ethernet Frame include: MAC DA/SA,optional 802.1ad/8021q VLAN tag,EtherType,Payload and FCS fields. This is typical characteristics
processed by Switch.
L1 MPLS Packet include: Preamble, SFD, MAC DA/SA, optional VLAN Tag,EtherType, TUNNEL label, PW label,Optional CW,
L2 Ethernet Frame (with optional VLAN operation), IPG. This is typical characteristics at physical Ethernet Interface for MPLS NNI.
AFR (admitted fractional Rate),referred as opticsIMEthAdmittedFractionalRate, is based on the traffic metering to trigger
pause generation when AFR is reached.
The default metering of traffic is applicable for L2 Ethernet frame, which remove 20bytes Preamble/SFD/IPG packet
from L1 Ethernet Packet at physical interface, i.e. not based on metering of ifSpeed (refer to opticsIMEthAdmittedFractionalRate
description). This de facto behaviour is deviated from AFR original definition.
When AFR is applicable for bandwidth shaping with Ingress or Egress physical interface, the removed or appended Overhead versus
Ethernet Frame shall be compensated to calibrate the traffic metering mechanism to reflect the traffic rate at Ingress or Egress
interface based on the measurement of Ethernet Frames of ingress traffic per port.
The value of opticsIMEthAFRCompensation, is defined to indicate the additional byte number shall be taken into account of metering of traffic rate.
In order to calibration of traffic rate to ingress physical interface speed, i.e. Ethernet packet rate, 20 bytes (Preamble/SFD/IPG)
shall be compensated;
In order to calibration of traffic rate to Egress MPLS physical interface speed, i.e. MPLSIF packet rate, below added bytes shall be compensated:
Ingress ETS flow VLAN operation (Optional)
+4 bytes/VLAN Push
-4 bytes/VLAN PoP
PW CW (Optional)
+4 bytes/enable mode
MPLS frame
+22bytes(DA/SA/EtherType/TUNNEL label/PW label)
L2 encapsulation (Optional)
+4 bytes(802.1Q or 802.1ad VLAN tag)
Ethernet Packet Overhead
+20bytes(Preamble/SFD/IPG)
Without the compensation of this value, the AFR indicates the threshold value of admitted bandwidth for Ingress traffic measured with Ethernet Frame.
With the compensation of this value, the Admitted fractional rate indicates the threshold value of admitted bandwidth for ingress or
egress traffic measured with Ethernet Packet on the associated Ingress or Egress physical Interface.
The default value shall be 0 to compatible with previous MIB definition. | ||||
| SopticsIMEthVLANTypeIndexNext | 1.3.6.1.4.1.637.54.1.25.2.1.2 | Unsigned32 (0..2147483647) | RO | |
scalar · Unsigned32 (0..2147483647) · read-only · current This object contains an appropriate value to be used for opticsIMEthVLANTypeIndex when creating entries in the opticsIMEthVLANTypeTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMEthVLANTypeIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. | ||||
| TopticsIMEthVLANTypeTable | 1.3.6.1.4.1.637.54.1.25.2.1.3 | NA | ||
table · not-accessible · current A table containing vendor-specific profiles of the EtherType values used to support provider-bridge VLAN tags (or stacked VLAN). | ||||
| RopticsIMEthVLANTypeEntry | 1.3.6.1.4.1.637.54.1.25.2.1.3.1 | NA | ||
row · not-accessible · current | ||||
| CopticsIMEthVLANTypeIndex | 1.3.6.1.4.1.637.54.1.25.2.1.3.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current Index for a row in the opticsIMEthVLANTypeTable. The range is 1...MAXVlanType, where MAXVlanType is product dependent. | ||||
| CopticsIMEthVLANTypeEtherType | 1.3.6.1.4.1.637.54.1.25.2.1.3.1.2 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of the EtherType field. The default value is the IEEE 802.1Q standard value 0x8100. | ||||
| CopticsIMEthVLANTypeUserLabel | 1.3.6.1.4.1.637.54.1.25.2.1.3.1.3 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The user label assigned to this EtherType profile. | ||||
| CopticsIMEthVLANTypeRowStatus | 1.3.6.1.4.1.637.54.1.25.2.1.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current It is used to create, delete, activate and deactivate a row in the opticsIMEthVLANTypeTable. | ||||
| TopticsIMifMauExtTable | 1.3.6.1.4.1.637.54.1.25.2.1.4 | NA | ||
table · not-accessible · current This table contains extension objects of the ifMauTable. | ||||
| RopticsIMifMauExtEntry | 1.3.6.1.4.1.637.54.1.25.2.1.4.1 | NA | ||
| CopticsIMifMauExtAsapIndex | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current This object defines tha ASAP object associated to the MAU interface. | ||||
| CopticsIMifMauExtOpticalChannelType | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current It is used to determine the type of Optical Channel carrying Ethernet interface and associated to the MAU interface
| ||||
| CopticsIMifMauExtOpticalChannelLambda | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object reports lambda (in nm) for optical channel (BlackWhite optical channel, Lambda optical channel) carrying Ethernet interface and associated to the MAU interface. | ||||
| CopticsIMifMauExtOpticalChannelSpacing | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object reports channel spacing (in nm) for colored optical channels carrying Ethernet interface | ||||
| CopticsIMifMauExtCrossoverMode | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The opticsIMifMauExtCrossoverMode configures the mode of the positioning of trasmitter and receiver respect to the line: - automatic, with value equal to 1 (default value) means the positioning is performed in automatic way; - mdI, with value equal to 2, means tx and rx are as for DCE (e.g. Hub or switch); - mDIX, with value equal to 3, means they are reverted just as for DTE (e.g. PC). | ||||
| CopticsIMifMauExtCrossoverState | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The opticsIMifMauExtCrossoverMode indicates, if possible, the positioning of trasmitter and receiver respect to the line: - unknown, with value equal to 1, if not identifiable - mdI, with value equal to 2, means tx and rx are as for DCE (e.g. Hub or switch) - mDIX, with value equal to 3, means they are reverted just as for DTE (e.g. PC). | ||||
| CopticsIMifMauExtOpticalLinkLength | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object reports the link length (in m) supported for optical channel carrying Ethernet interface and associated to the MAU interface | ||||
| CopticsIMifMauExtSynchOperationMode | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current It is used to define the Operation Mode (G.8264) of an Ethernet interface with the following values: - synchronous (1) the interface is belonging to a NE with system clock (EEC) and it should be used for synchronization purpose; in this case the opticsIMifMauExtSynchRole object has to be defined as 'master' or 'slave' value. - asynchronous (2) the interface is not belonging to a NE with system clock (EEC); in this case the opticsIMifMauExtSynchRole object could assume any value incuding 'auto' value (default).
| ||||
| CopticsIMifMauExtSynchRole | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current A value that uniquely identifies the synchronization role of the Ethernet interface (1000Base-T) advertised by the local auto-negotiation entity. The 'auto' value is not allowed in case the opticsIMifMauExtSynchOperationMode is set to 'synchronous' value.
| ||||
| CopticsIMifMauExtOpticalReceivedSignalLevel | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.10 | INTEGER (-1000..0) | RO | |
column · INTEGER (-1000..0) · read-only · current This object represents the local received power level. It is a negative integer with associated measure unit expressed in one tenth of dBm. | ||||
| CopticsIMifMauExtDirectionMode | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current It is used to define the Interface Direction Mode (IEEE 802.3 clause 66) of an Ethernet interface with the following values: - unidirectional (1) When the interface detects an incoming failure (e.g., LOS), it keeps transmitting traffic in the outgoing direction and also inserts a remote failure indication, if such an indication is defined for that type of MAU (e.g., an RFI signal), to the remote interface. - bidirectional (2) When the interface detects an incoming failure (e.g., LOS), it stops transmitting traffic in the outgoing direction and also inserts a remote failure indication, if such an indication is defined for that type of MAU (e.g., an RFI signal), to the remote interface.
| ||||
| CopticsIMifMauExtOpticalTransmittedSignalLevel | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.12 | INTEGER (-1000..1000) | RO | |
column · INTEGER (-1000..1000) · read-only · current This object represents the local transmitted power level. It is an integer with associated measure unit expressed in one tenth of dBm. | ||||
| CopticsIMifMauExtEthernetCompliance | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.13 | AutonomousType | RO | |
column · AutonomousType · read-only · current This object reports the Ethernet Compliance (MAU type) supported by the physical module hosting this interface. | ||||
| CopticsIMifMauExtSynchRoleResult | 1.3.6.1.4.1.637.54.1.25.2.1.4.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current A value that uniquely identifies the synchronization role of the Ethernet interface as the result of the auto-negotiatiation between local and peer entities. 'none' value in case auto-negotiation fail. 'notRelevant' in case of syncronization role not meaning the the Ethernet interface (optical).
| ||||
| TopticsIMEthConfExtTable | 1.3.6.1.4.1.637.54.1.25.2.1.5 | NA | ||
table · not-accessible · current This table contains extension objects of the opticsIMEthConfTable. | ||||
| RopticsIMEthConfExtEntry | 1.3.6.1.4.1.637.54.1.25.2.1.5.1 | NA | ||
| CopticsIMEthConfExtlbLine | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current This object specifies if the line loopback is active or not. The default value is FALSE | ||||
| CopticsIMEthConfExtlbInternal | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This object specifies if the internal loopback is active or not. The default value is FALSE | ||||
| CopticsIMEthConfExtRemCsfMAUAction | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the consequent action triggered on local Interface egress port in front of Client failures detection for port-to-port application. - disabled (0) is defined to perform no consequent actions. - transmitter_shutdown (1) is defined to trigger forced transmitter shut-down action. If the interface is not involved in a port-to-port application this consequent action will never be triggered. The default value is disabled | ||||
| CopticsIMEthConfExtMirrorType | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The port can be configured acting as a mirroring port: the available
values are:
0 = no mirroring (the default value)
1 = mirroring a port input
2 = mirroring a port output
-- TSDnm93666:P.Villa Begin
3 = BOTH input and output mirroring
-- TSDnm93666:P.Villa End | ||||
| CopticsIMEthConfExtMirrorPortSelect | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.5 | InterfaceIndexOrZero | RW | |
column · InterfaceIndexOrZero · read-write · current This object points to an entry in the ifTable that represents the the port that is mirrored by the port identified by this entry of the opticsIMEthConfExtTable. The default value is 0 (zero) that means no port mirrored | ||||
| CopticsIMEthConfExtCsfMAUAction | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the consequent action triggered on local Interface
egress port for port-to-port application in front of received CSF Frame
indications (due to detected remote Ethernet PHY Interface failures).
The choice of enabled CSF consequent actions is allowed to be different
from SSF consequent actions (consequent actions coping with SDH network
failures).
disabled (0) is defined to perform no consequent actions.
transmitter_shutdown (1) is defined to trigger forced transmitter
shut-down action.
If the interface is not involved in a port-to-port application, this
consequent action will never be triggered. The default value is disabled | ||||
| CopticsIMEthConfExtSsfMAUAction | 1.3.6.1.4.1.637.54.1.25.2.1.5.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the consequent action triggered on local Interface
egress port for port-to-port application in front of Server Layer (e.g.SDH
network) failures.
The choice of enabled SSF consequent actions is allowed to be different
from CSF consequent actions (consequent actions coping with in front of
'Far-end Client Signal Fail (CSF) indications').
disabled (0) is defined to perform no consequent actions.
transmitter_shutdown (1) is defined to trigger forced transmitter shut-down
action.
If the interface is not involved in a port-to-port application, this
consequent action will never be triggered. The default value is disabled | ||||
| SopticsIMaclNextIndex | 1.3.6.1.4.1.637.54.1.25.2.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object contains an appropriate value to be used for opticsIMaclIndex when creating entries in the opticsIMaclTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMaclIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. | ||||
| SopticsIMaclMacAceIndexNext | 1.3.6.1.4.1.637.54.1.25.2.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object contains an appropriate value to be used for opticsIMaclMacAceIndex when creating entries in the opticsIMaclMacAceTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMaclMacAceIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned | ||||
| TopticsIMaclTable | 1.3.6.1.4.1.637.54.1.25.2.1.8 | NA | ||
table · not-accessible · current The table representing the MAC acl. The table references through the index ifIndex the classifier entry associated to the Ethernet port(interface) which the MAC acl applies to. | ||||
| RopticsIMAclMacEntry | 1.3.6.1.4.1.637.54.1.25.2.1.8.1 | NA | ||
| CopticsIMaclIndex | 1.3.6.1.4.1.637.54.1.25.2.1.8.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The unique index of an ACE within an ACL | ||||
| CopticsIMaclName | 1.3.6.1.4.1.637.54.1.25.2.1.8.1.2 | OpticsIMUserLabel | RC | |
column · OpticsIMUserLabel · read-create · current The name of an ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device | ||||
| CopticsIMaclApplyChange | 1.3.6.1.4.1.637.54.1.25.2.1.8.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current A flag to indicate when the changes to the acl are terminated and are applied. When an acl modification is on going, the attribute is equal to false for indicating that the on going changes are not applied. | ||||
| CopticsIMaclStatus | 1.3.6.1.4.1.637.54.1.25.2.1.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this ACL conceptual row entry. This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row becomes active, value in any other column within such row cannot be modified. | ||||
| CopticsIMaclPortIndicatorAssociation | 1.3.6.1.4.1.637.54.1.25.2.1.8.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current The indication of any interface association. The default value is false. When any port is associated to ACL entry, the agent changes this value to true. This value is changed again to false, when the ACL entry is nomore associated to any interface | ||||
| TopticsIMaclMacAceTable | 1.3.6.1.4.1.637.54.1.25.2.1.9 | NA | ||
table · not-accessible · current The conceptual table of all of aclMacAceEntry | ||||
| RopticsIMaclMacAceEntry | 1.3.6.1.4.1.637.54.1.25.2.1.9.1 | NA | ||
row · not-accessible · current The conceptual row for aclMacAceTable. | ||||
| CopticsIMaclMacAceIndex | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The unique index of an ACE within an ACL | ||||
| CopticsIMaclMacAceOrder | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the order of execution of ACE within an ACL | ||||
| CopticsIMaclMacAceAction | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The action to be executed, if the condition of the ace is verified
| ||||
| CopticsIMaclMacAceSourceMacAddr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.4 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current It indicates the 48 bits source MAC address. The specified source mac of the packet. The packet's source mac address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this object. | ||||
| CopticsIMaclMacAceSourceMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.5 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified source mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAceDestMacAddr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.6 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current It indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value of this object. | ||||
| CopticsIMaclMacAceDestMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.7 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified destination mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAceVid | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.8 | OpticsIMETSVlanCfg | RC | |
column · OpticsIMETSVlanCfg · read-create · current Indicates the 12 bits of the VLAN Identifier value. | ||||
| CopticsIMaclMacAceVidRange | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.9 | Gauge32 (0..4095) | RC | |
column · Gauge32 (0..4095) · read-create · current The specified VLAN Identifier offset. The packet's VLAN Identifier has to be included between aclMacAceVid and this value plus aclMacAceVidRange; if VLAN Identifier range is not configured, 0 is the value of this object. | ||||
| CopticsIMaclMacAceEtherType | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.10 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Indicates the 16 bits of the EtherType value. | ||||
| CopticsIMaclMacAceEtherTypeRange | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.11 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The specified EthernetType offset: the packet's Ethertype has to be included between aclMacEhtertype and this value plus aclMacAceEtherTypeRange; if the Ethertype range is not configured, 0 is the value of this object. | ||||
| CopticsIMaclMacAceStatus | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this mac ACE conceptual row entry. This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row becomes active, value in any other column within such row cannot be modified. | ||||
| CopticsIMaclMacAceVidBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.13 | OCTET STRING (SIZE (2)) | RC | |
column · OCTET STRING (SIZE (2)) · read-create · current The specified Vid mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAceEtherTypeBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.14 | OCTET STRING (SIZE (1)) | RC | |
column · OCTET STRING (SIZE (1)) · read-create · current The specified EtherType mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAcePriority | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the 8 bits of the 802.1p priority bits value. The specified 802.1p priority bits value of the packet. The packet's 802.1p priority bits value is AND-ed with the value of opticsIMaclMacAcePriorityBitMask and then compared against the value of this object.
| ||||
| CopticsIMaclMacAcePriorityBitMask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.16 | OCTET STRING (SIZE (2)) | RC | |
column · OCTET STRING (SIZE (2)) · read-create · current The specified 802.1p Priority mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAceSourceIPV4Addr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.17 | OCTET STRING (SIZE (4)) | RW | |
column · OCTET STRING (SIZE (4)) · read-write · current It indicates the 32 bits source IP address.
The specified source IP of the packet is AND-ed with the
value of opticsIMaclMacAceSourceIPV4AddrBitmask and then compared
against the value of this object. | ||||
| CopticsIMaclMacAceSourceIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.18 | OCTET STRING (SIZE (4)) | RW | |
column · OCTET STRING (SIZE (4)) · read-write · current The specified source IPv4 address mask. If it is not configured, the default value is all 1. | ||||
| CopticsIMaclMacAceDestIPV4Addr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.19 | OCTET STRING (SIZE (4)) | RW | |
column · OCTET STRING (SIZE (4)) · read-write · current It indicates the 32 bits destination IPv4 address. The specified destination IPv4 address is AND-ed with the value of opticsIMaclMacAceDestIPV4AddrBitmask and then compared against the value of this object. | ||||
| CopticsIMaclMacAceDestIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.20 | OCTET STRING (SIZE (4)) | RW | |
column · OCTET STRING (SIZE (4)) · read-write · current The specified destination IPv4 address mask. If it is not configured, the default value is all 1. | ||||
| CopticsIMaclMacAceIpDscp | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.21 | OpticsIMETSIpDscp | RW | |
column · OpticsIMETSIpDscp · read-write · current It indicates IP DSCP value | ||||
| CopticsIMaclMacAceIpDscpRange | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.22 | Gauge32 (0..63) | RW | |
column · Gauge32 (0..63) · read-write · current The specified DSCP Identifier offset. The packet's DSCP has to be included between aclMacAceIpDscp and this value plus aclMacAceIpDscpRange; if IP DSCP range is not configured, 0 is the value of this object. | ||||
| CopticsIMaclMacAceIpDscpBitMask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.23 | OCTET STRING (SIZE (2)) | RW | |
column · OCTET STRING (SIZE (2)) · read-write · current The specified DSCP mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclMacAceSourceTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.24 | Unsigned32 (0..65537) | RW | |
column · Unsigned32 (0..65537) · read-write · current Indicates the Source TCP Port value.The default value is 65537(don't care) | ||||
| CopticsIMaclMacAceMaxSourceTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.25 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Indicates the max value of Source TCP Port. Default value:0. | ||||
| CopticsIMaclMacAceDestTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.26 | Unsigned32 (0..65537) | RW | |
column · Unsigned32 (0..65537) · read-write · current Indicates the Dest TCP Port value.The default value is 65537(don't care) | ||||
| CopticsIMaclMacAceMaxDestTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.27 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Indicates the max value of Dest TCP Port. Default value:0. | ||||
| CopticsIMaclMacAceSourceUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.28 | Unsigned32 (0..65537) | RW | |
column · Unsigned32 (0..65537) · read-write · current Indicates the Source UDP Port value.The default value is 65537(don't care) | ||||
| CopticsIMaclMacAceMaxSourceUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.29 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Indicates the max value of Source UDP Port. Default value:0. | ||||
| CopticsIMaclMacAceDestUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.30 | Unsigned32 (0..65537) | RW | |
column · Unsigned32 (0..65537) · read-write · current Indicates the Dest UDP Port value.The default value is 65537(don't care) | ||||
| CopticsIMaclMacAceMaxDestUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.31 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Indicates the max value of Dest UDP Port. Default value:0. | ||||
| CopticsIMaclMacAceSourceIPV6Addr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.32 | OCTET STRING (SIZE (16)) | RW | |
column · OCTET STRING (SIZE (16)) · read-write · current It indicates the 128 bits source IPV6 address.
The specified source IP of the packet is AND-ed with the
value of opticsIMaclMacAceSourceIPV6AddrBitmask and then compared
against the value of this object. | ||||
| CopticsIMaclMacAceSourceIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.33 | OCTET STRING (SIZE (16)) | RW | |
column · OCTET STRING (SIZE (16)) · read-write · current The specified source IPv6 address mask. If it is not configured, the default value is all 1. | ||||
| CopticsIMaclMacAceDestIPV6Addr | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.34 | OCTET STRING (SIZE (16)) | RW | |
column · OCTET STRING (SIZE (16)) · read-write · current It indicates the 128 bits destination IPv6 address. The specified destination IPv6 address is AND-ed with the value of opticsIMaclMacAceDestIPV6AddrBitmask and then compared against the value of this object. | ||||
| CopticsIMaclMacAceDestIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.35 | OCTET STRING (SIZE (16)) | RW | |
column · OCTET STRING (SIZE (16)) · read-write · current The specified destination IPv6 address mask. If it is not configured, the default value is all 1. | ||||
| CopticsIMaclMacAceProtocolId | 1.3.6.1.4.1.637.54.1.25.2.1.9.1.36 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current 8 bits Protocol Identifier value in IPV4 Header (or 8 bits Next Header value in IPv6 Header). Default value:255 | ||||
| TopticsIMaclActualMacAceTable | 1.3.6.1.4.1.637.54.1.25.2.1.10 | NA | ||
table · not-accessible · current The conceptual read-only table of all of aclMacAceEntry | ||||
| RopticsIMAclActualMacAceEntry | 1.3.6.1.4.1.637.54.1.25.2.1.10.1 | NA | ||
row · not-accessible · current The conceptual read-only row for aclMacAceTable. | ||||
| CopticsIMAclActualMacAceIndex | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The unique index of an ACE within an ACL | ||||
| CopticsIMAclActualMacAceOrder | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Specifies the order of execution of ACE within an ACL | ||||
| CopticsIMAclActualMacAceAction | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The action to be executed, if the condition of the ace is verified
| ||||
| CopticsIMAclActualMacAceSourceMacAddr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.4 | OCTET STRING (SIZE (6)) | RO | |
column · OCTET STRING (SIZE (6)) · read-only · current It indicates the 48 bits source MAC address.
The specified source mac of the packet
The packet's source mac address is AND-ed with the
value of aceMacSourceMacAddrBitmask and then compared
against the value of this object. | ||||
| CopticsIMAclActualMacAceSourceMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.5 | OCTET STRING (SIZE (6)) | RO | |
column · OCTET STRING (SIZE (6)) · read-only · current The specified source mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMAclActualMacAceDestMacAddr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.6 | OCTET STRING (SIZE (6)) | RO | |
column · OCTET STRING (SIZE (6)) · read-only · current It indicates the 48 bits destination MAC address.
The specified destination mac of the packet The packet's destination
mac address is AND-ed with the value of aceMacDestMacAddrBitmask and
then compared against the value of this object. | ||||
| CopticsIMAclActualMacAceDestMacAddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.7 | OCTET STRING (SIZE (6)) | RO | |
column · OCTET STRING (SIZE (6)) · read-only · current The specified destination mac address mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMAclActualMacAceVid | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.8 | OpticsIMETSVlanCfg | RO | |
column · OpticsIMETSVlanCfg · read-only · current Indicates the 12 bits of the VLAN Identifier value. | ||||
| CopticsIMAclActualMacAceVidRange | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.9 | Gauge32 (0..4095) | RO | |
column · Gauge32 (0..4095) · read-only · current The specified VLAN Identifier offset. The packet's VLAN Identifier has to be included between aclMacAceVid and this value plus aclMacAceVidRange; if VLAN Identifier range is not configured, 0 is the value of this object. | ||||
| CopticsIMAclActualMacAceEtherType | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the 16 bits of the EtherType value. | ||||
| CopticsIMAclActualMacAceEtherTypeRange | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The specified EthernetType offset: the packet's Ethertype has to be included between aclMacEhtertype and this value plus aclMacAceEtherTypeRange; if the Ethertype range is not configured, 0 is the value of this object. | ||||
| CopticsIMaclActualMacAceVidBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.12 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The specified Vid mask | ||||
| CopticsIMaclActualMacAceEtherTypeBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.13 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The specified EtherType mask. | ||||
| CopticsIMaclActualMacAcePriority | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the 8 bits of the 802.1p priority bits value. The specified 802.1p priority bits value of the packet. The packet's 802.1p priority bits value is AND-ed with the value of opticsIMaclMacAcePriorityBitMask and then compared against the value of this object.
| ||||
| CopticsIMaclActualMacAcePriorityBitMask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.15 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The specified 802.1p Priority mask. If it is not configured, the default value is all 1 | ||||
| CopticsIMaclActualMacAceSourceIPV4Addr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.16 | OCTET STRING (SIZE (4)) | RO | |
column · OCTET STRING (SIZE (4)) · read-only · current It indicates the 32 bits source IP address. | ||||
| CopticsIMaclActualMacAceSourceIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.17 | OCTET STRING (SIZE (4)) | RO | |
column · OCTET STRING (SIZE (4)) · read-only · current The specified source IPv4 address mask. | ||||
| CopticsIMaclActualMacAceDestIPV4Addr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.18 | OCTET STRING (SIZE (4)) | RO | |
column · OCTET STRING (SIZE (4)) · read-only · current It indicates the 32 bits destination IPv4 address. | ||||
| CopticsIMaclActualMacAceDestIPV4AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.19 | OCTET STRING (SIZE (4)) | RO | |
column · OCTET STRING (SIZE (4)) · read-only · current The specified destination IPv4 address mask. | ||||
| CopticsIMaclActualMacAceIpDscp | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.20 | OpticsIMETSIpDscp | RO | |
column · OpticsIMETSIpDscp · read-only · current It indicates IP DSCP value | ||||
| CopticsIMaclActualMacAceIpDscpRange | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.21 | Gauge32 (0..63) | RO | |
column · Gauge32 (0..63) · read-only · current The specified DSCP Identifier offset. | ||||
| CopticsIMaclActualMacAceIpDscpBitMask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.22 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The specified DSCP mask. | ||||
| CopticsIMaclActualMacAceSourceTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.23 | Unsigned32 (0..65537) | RO | |
column · Unsigned32 (0..65537) · read-only · current Indicates the Source TCP Port value. | ||||
| CopticsIMaclActualMacAceMaxSourceTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.24 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Indicates the max value of Source TCP Port. | ||||
| CopticsIMaclActualMacAceDestTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.25 | Unsigned32 (0..65537) | RO | |
column · Unsigned32 (0..65537) · read-only · current Indicates the Dest TCP Port value. | ||||
| CopticsIMaclActualMacAceMaxDestTcpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.26 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Indicates the max value of Dest TCP Port. | ||||
| CopticsIMaclActualMacAceSourceUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.27 | Unsigned32 (0..65537) | RO | |
column · Unsigned32 (0..65537) · read-only · current Indicates the Source UDP Port value. | ||||
| CopticsIMaclActualMacAceMaxSourceUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.28 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Indicates the max value of Source UDP Port | ||||
| CopticsIMaclActualMacAceDestUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.29 | Unsigned32 (0..65537) | RO | |
column · Unsigned32 (0..65537) · read-only · current Indicates the Dest UDP Port value. | ||||
| CopticsIMaclActualMacAceMaxDestUdpPort | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.30 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Indicates the max value of Dest UDP Port | ||||
| CopticsIMaclActualMacAceSourceIPV6Addr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.31 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current It indicates the 128 bits source IPV6 address.
The specified source IP of the packet is AND-ed with the
value of opticsIMaclMacAceSourceIPV6AddrBitmask and then compared
against the value of this object. | ||||
| CopticsIMaclActualMacAceSourceIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.32 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The specified source IPv6 address mask. | ||||
| CopticsIMaclActualMacAceDestIPV6Addr | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.33 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current It indicates the 128 bits destination IPv6 address. The specified destination IPv6 address is AND-ed with the value of opticsIMaclMacAceDestIPV6AddrBitmask and then compared against the value of this object. | ||||
| CopticsIMaclActualMacAceDestIPV6AddrBitmask | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.34 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The specified destination IPv6 address mask. | ||||
| CopticsIMAclActualMacAceProtocolId | 1.3.6.1.4.1.637.54.1.25.2.1.10.1.35 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates 8 bits Protocol Identifier value in IPV4 Header (or 8 bits Next Header value in IPv6 Header) | ||||
| NopticsimEthNEMCConf | 1.3.6.1.4.1.637.54.1.25.99.2 | |||
| NopticsimEthNEMCCompl | 1.3.6.1.4.1.637.54.1.25.99.2.1 | |||
| NopticsimEthNEMCGroup | 1.3.6.1.4.1.637.54.1.25.99.2.2 | |||
Textual conventions
PortProfileOCTET STRINGAn octet string containing a list of tag values. A tag value is an arbitrary string of octets, but it does not contain a delimiter character, which delimits the tags in the list. The delimiter character is the ASCII space character (0x20). The empty string is a valid list. The tag indicates a functionality, which behaviour has been commonly agreed. Example of valid tags are: port2port, l2switch.