ALCATEL-IND1-WEBMGT-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
WebView - web based embedded device manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-WEBMGT-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-WEBMGT-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.17.1Imports
| ALCATEL-IND1-BASE | softentIND1WebMgt |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1WebMgtMIB | 1.3.6.1.4.1.6486.801.1.2.1.17.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
WebView - web based embedded device manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1WebMgtMIBNotifications | 1.3.6.1.4.1.6486.801.1.2.1.17.1.0 | |||
node · current Branch For WebView MIB Subsystem Notifications. | ||||
| !webMgtServerErrorTrap | 1.3.6.1.4.1.6486.801.1.2.1.17.1.0.1 | |||
notification · current This trap is sent to management station(s) when the Web Management server goes into error state after crashing twice within a minute.
| ||||
| NalcatelIND1WebMgtMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1 | |||
node · current Branch For WebView Subsystem Managed Objects. | ||||
| SalaIND1WebMgtAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable access to WebView. If WebView access is disabled, the WebView server will not be disabled automatically.
| ||||
| SalaIND1WebMgtSSL | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable forced SSL for WebView.
| ||||
| SalaIND1WebMgtHttpPort | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.3 | Integer32 (80 | 1024..65535) | RW | |
scalar · Integer32 (80 | 1024..65535) · read-write · current The user configurable TCP port for switch's http access. Default is 80. | ||||
| SalaIND1WebMgtHttpsPort | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.4 | Integer32 (443 | 1024..65535) | RW | |
scalar · Integer32 (443 | 1024..65535) · read-write · current The user configurable TCP port for switch's https access. Default is 443. | ||||
| SalaIND1WebMgtServerStatus | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable WebView embedded server. If the WebView server is disabled and WebView access is enabled, access will be automatically disabled. However, if the server was disabled and changes to enabled, WebView access will not be automatically enabled. Status restarting and error are max-access read-only (the error code string can be read using alaIND1WebMgtServerError).
| ||||
| SalaIND1WebMgtServerError | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.6 | SnmpAdminString (SIZE (0..127)) | RO | |
scalar · SnmpAdminString (SIZE (0..127)) · read-only · current Error code string when WebView Server is in error status.
Format is 'Error Num: {Number}. {String message}.' where
{Number} is an integer representing the error code and
{String message} is the error string message. | ||||
| NwebMgtTrapsObj | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.7 | |||
| SwebMgtServerError | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.7.1 | SnmpAdminString (SIZE (0..127)) | RO | |
scalar · SnmpAdminString (SIZE (0..127)) · read-only · current Error code string of WebView Server error, same as alaIND1WebMgtServerError. | ||||
| NalcatelIND1WebMgtCertObjects | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.8 | |||
node · current Branch For WebView SSL Certificate Objects. | ||||
| SalcatelIND1WebMgtCertFile | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Triggers certificate file to be synchronize across the chassis. The default value may not be used when setting this object. The default will always be returned when getting this object.
| ||||
| SalcatelIND1WebMgtCertMD5 | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.8.2 | SnmpAdminString (SIZE (0..32)) | RW | |
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The md5 of the certificate indicated by alcatelIND1WebMgtCertFile. This value can be filled in when doing a set but it must match the md5 of the file on the primary master CMM. This object will always return the default value. | ||||
| SalaIND1WebMgtWlanIpPrecedence | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The WLAN virtual cluster IP for Webview re-direct, can be obtained either via Configuration or via LLDP. The preference for the choice of the cluster IP can be set using this precedence object. If the preference for the source of the cluster IP is not set, then the IP address obtained via LLDP will be used for the re-direct.
| ||||
| SalaIND1WebMgtWlanConfiguredIpAddressType | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.10 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current IP address type of the WLAN virtual cluster IP address configured via CLI/SNMP/Webview. IPv4 (1) is the only type currently supported.
| ||||
| SalaIND1WebMgtWlanConfiguredIpAddress | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.11 | InetAddress | RW | |
scalar · InetAddress · read-write · current WLAN virtual cluster IP address configured manually via CLI/SNMP/Webview. | ||||
| SalaIND1WebMgtWlanLldpIpAddressType | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.12 | InetAddressType | RO | |
scalar · InetAddressType · read-only · current IP address type of the WLAN virtual cluster IP address obtained via LLDP. IPv4 (1) is the only type currently supported.
| ||||
| SalaIND1WebMgtWlanLldpIpAddress | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.13 | InetAddress | RO | |
scalar · InetAddress · read-only · current WLAN virtual cluster IP address obtained via LLDP. | ||||
| SalaIND1WebMgtSSLStrongCiphers | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable SSL Strong Ciphers for WebView.
| ||||
| SalaIND1WebMgtTlsVersion | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used for selecting the TLS version for Webview.
| ||||
| SalaIND1WebMgtInstallCertFilePath | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.16 | SnmpAdminString (SIZE (0..255)) | RW | |
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object is used for install certificate file path for Webview. | ||||
| SalaIND1WebMgtCertificate | 1.3.6.1.4.1.6486.801.1.2.1.17.1.1.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current Default: The self-sign webview certificcate. Custom: The user's webview certificate.
| ||||
| NalcatelIND1WebMgtMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2 | |||
node · current Branch For WebView Subsystem Conformance Information. | ||||
| NalcatelIND1WebMgtMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.1 | |||
node · current Branch For WebView Subsystem Groups of managed objects. | ||||
| GalaIND1WebMgtConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.1.1 | |||
group · current Collection of objects for global configuration parameters defining the behavior of the embedded web server.
| ||||
| GalaIND1WebMgtNotificationGroup | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.1.2 | |||
| GalaIND1WebMgtConfigMIBCertGroup | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.1.3 | |||
group · current Collection of objects for global configuration parameters defining the behavior of the embedded web server's SSL certificate. | ||||
| NalcatelIND1WebMgtMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.2 | |||
node · current Branch For WebView Subsystem Compliance Statements. | ||||
| MalaIND1WebMgtConfigMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.17.1.2.2.1 | |||
compliance · current Compliance statement for Learned Port Security. | ||||
Traps / Notifications
- webMgtServerErrorTrap
1.3.6.1.4.1.6486.801.1.2.1.17.1.0.1